Related
So, sort of long story, i'll cut it short
-Got an old X10, had stock 2.3.3
-Rooted it
-Did not unlock bootloader, got kinda scared.
-Tried to install FeraLab custom ROM, it failed probably because of sdcard permissions; i accidentally wipe /system /data /cache
-stuck at first Sony Ericsson screen
-Somehow managed to flash a 2.1 stock rom with flashtool, after an hour of different combinations of enterring flash mode and pulling the battery
-Tried to install FeraLab again, this time it went through
-After install, rebooted, phone shut down during boot up process
-Will not turn on at all. Even when plugged into a PC, wall, not plugged in, pulling battery, etc.
I think what happened is that FeraLab needed a newer baseband than the 2.1 stock rom had. Does anyone have any suggestions on how to get this sucker to even turn on? Not a single LED is on when plugged in, giving me the impression that it's not charging.
If the battery has drained out, it might take some time before it kicks in and indicates that it is charging.
If the ROM has failed somehow, it might not show that it is charging at all, but might be charging.
Either way: Let it charge "blindly" for a while, and see what happens.
Once it does boot up to some level or shows life-signs, let it charge fully before you'l attempt a ROM flash.
The flash/recovery mode needs a full battery, and reason is that the external power isn't used even when connected while in flash/recovery mode.
If you happen to be in bad luck, and the ROM failed as a result of a drained battery, you might have to charge the battery externally. Use an external battery charger made for 3.6 volts Lithium Polymer batteries, and make sure to align the + and - terminals properly.
I can recommend the multicharger from Powerbase, called C-734U:
http://www.powerbasehk.com/product.php?id=148
Using it myself to charge the X10 battery, as well as other batteries from other devices I have.
EDIT:
(For some reason, powerbase has taken back that it'll charge Lipo batteries, but when I bought mine, it was described as a li-ion, li-poly and Ni-MH charger, and it't ability to charge li-poly batteries was the very one reason to why I bought it.
I suspect PowerBase does not want to take responsibility if anything happens to the li-poly-batteries, as they are known to be more dangerous than other types.)
I've left it on the wall charger all night, no response or anything. Luckily, I bought a new battery a few days ago, so when that comes in, hopefully it will be charged enough for this thing to boot.
Do me a favour are u able to take screebshot of settings, about phone menu and post it here? Need to see ur baseband and kernel
Sent from my X10i using XDA
laneyofdeath said:
Do me a favour are u able to take screebshot of settings, about phone menu and post it here? Need to see ur baseband and kernel
Sent from my X10i using XDA
Click to expand...
Click to collapse
Dude his phone wont start up. How come he'll be able to take a screenshot
Sent from my LT26i using xda premium
king-iyokan said:
Dude his phone wont start up. How come he'll be able to take a screenshot
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Yeah, i'm not sure what he expected. But, good news! Now for some reason my phone started blinking red whenever I tried to turn it on! I guess the battery completely ran out or something. It also blinks every now and then when plugged in, so I guess it's charging. The previous owner of this phone said that it had some battery problems, so that's why I ordered that new battery. I'll let it charge for awhile and let you guys know what happens.
Okay, after getting my new battery, the phone will still not turn on. I think i've figured out two behaviors:
1. If the battery is nearly completely out of charge, it will flash a red light
2. If the battery has charge, it will not do anything at all.
Anyone know how to fix this?
While trying to turn on the phone, after long-press power button, do you get a flash from status led & short vibration?
From my XPERIA X10S v8.2 on kCernel @ 1.19ghz
ToledoJab said:
While trying to turn on the phone, after long-press power button, do you get a flash from status led & short vibration?
From my XPERIA X10S v8.2 on kCernel @ 1.19ghz
Click to expand...
Click to collapse
No vibration, the red LED flashes three times, and that is , as I said before, what happens when the battery seems to not have any charge. If I have a charged battery it does absolutely nothing.
Have you removed sim & sd card and tried. I know it sounds dumb but when I flashed a bad kernel I had to try to connect flash mode like 10 times. Finally I left the phone unplugged from pc, started flashtool and started flashing. I only put battery in phone just before holding back key. I never connected USB until tool said to dis-connect phone and connect in flashmode.
i wish you luck, I know how I felt when it went wrong
From my XPERIA X10S v8.2 on kCernel @ 1.19ghz
FireFreek said:
So, sort of long story, i'll cut it short
-Got an old X10, had stock 2.3.3
-Rooted it
-Did not unlock bootloader, got kinda scared.
-Tried to install FeraLab custom ROM, it failed probably because of sdcard permissions; i accidentally wipe /system /data /cache
-stuck at first Sony Ericsson screen
-Somehow managed to flash a 2.1 stock rom with flashtool, after an hour of different combinations of enterring flash mode and pulling the battery
-Tried to install FeraLab again, this time it went through
-After install, rebooted, phone shut down during boot up process
-Will not turn on at all. Even when plugged into a PC, wall, not plugged in, pulling battery, etc.
I think what happened is that FeraLab needed a newer baseband than the 2.1 stock rom had. Does anyone have any suggestions on how to get this sucker to even turn on? Not a single LED is on when plugged in, giving me the impression that it's not charging.
Click to expand...
Click to collapse
Try to flash any latest kernel via flashtool . Go for doomkernel . I think its software issue . Try this first .
Almost same here please help..
Last night battery ran out of charge & phone switched off.. then i plugged the charger it doesn't charge.. after some time i tried turning on.. Vibrates with the green LED but nothing happens then..
Note: This is not the 1st time i'm letting my phone drain, but facing this problem for the 1st time..
Rom : Spikelabs GB Gaming rom
Kernel : Ferakernel v23 beta6
I tried another battery, charger, data cable.. Tried flashing stock & spikelabs kernel., but of no use..
Any help is greatly appreciated..
Thanks in advance.. :good:
Something like that happened to me not long ago!
I was trying to flash some ROMs and I messed up then my phone wouldn't turn on!
But Miracously, I could flash a Stock 2.3.3 which fixed the problem!
At first, I used Sony PC Companion, which helped a lot- and after I screwed it for the second time, I used FlashTool-
I don't know if this was helpful, but I hope your x10 will be fixed soon!
yeah try the PC Companion first, it helped me too a couple of weeks ago
No luck...
Hi friends..
Tried to repair using PC companion, but was able to connect only in flash mode, unable to proceed software update..
I previously tried flashing stock GB using flashtool thrice. Still couldn't switch on the phone.. What else may i try..
Thanks friends..
ashok weird said:
Hi friends..
Tried to repair using PC companion, but was able to connect only in flash mode, unable to proceed software update..
I previously tried flashing stock GB using flashtool thrice. Still couldn't switch on the phone.. What else may i try..
Thanks friends..
Click to expand...
Click to collapse
try flashing kernel other than spikelabs (e.g. feravolt,doom,achotjan,zkernel..etc.)
sanababitz said:
try flashing kernel other than spikelabs (e.g. feravolt,doom,achotjan,zkernel..etc.)
Click to expand...
Click to collapse
Tried Ferakernel, Stock GB kernel, etc bro.. No luck..
Flashed Stock GB firmware more than 3 times still no luck :crying:
SEUS not working _ couldn't connect to network..
SUS does not have x10 enlisted
Went to 3 service shops at - Ritchie street, Chennai. They simply said harware issue (Short in board) and gave back the phone.
Now given at a better service centre. Will get back on monday it seems. Will update the status friends..
Thanks..
Here also they said the same reason friends.. Short in board..
Is there any way i could recover the phone???
hello last week I installed this rom http://forum.xda-developers.com/showthread.php?t=1444858 and it was fine...then I want to get back to stock rom and I instaled fw .58...then update notification comes up to fw .62...I accepted that update and my device should reebot...but it didn't...I think that he is bricked...then I try to flash that custom rom via flashtool and phone connect automatic in flash mode without pressing volume down+power button...when I try to turn on the phone green led blink...when I put phone on charger green led light still blink...any ideas how to unbrick?
sorry for my bad english
You had unlocked bootloader.
Check my tutorial, link in signature.
Also, flashmode is turn off phone, hold down volume down button and connect USB cable.
Sent from my Xperia Live using xda premium
I don't have unlocked bootloader
I took this picture before installing a custom rom in a case of failrue
ur bootloader unlock is not allowed !! ? ... try this remove ur battery once .. and then enter into flashmode......
believe me I tried everything...yesterday I took the cell phone warranty and I hope that they will fix it...
today my phone come back from service and they didn't fix him...it's over
live with walkman was my first android phone
Domac5 said:
today my phone come back from service and they didn't fix him...it's over
live with walkman was my first android phone
Click to expand...
Click to collapse
Still no access to flashmode? Make sure phone is turned off, hold down Volume DOWN button and then connect USB cable. Nothing more, nothing less.
it works
i flashed Xperia 2011 Range_FreeXperia_ALL.ftf and my phone works...thank god
Domac5 said:
it works
i flashed Xperia 2011 Range_FreeXperia_ALL.ftf and my phone works...thank god
Click to expand...
Click to collapse
oh, good.
it's disappointing to know the service center didn't fix your phone. i guess warranty is just good for factory defects.
exactly ...if its a software fault we are better off solving it on our own from xda than service center...... they r only good for hardware faults..... and most of them are not covered in warranty i think
but they took my warranty papers and cancel guarantee...what a bastards
i am using now this rom http://forum.xda-developers.com/showthread.php?t=1444858
it's hard to find rom which requires no unlocked bootloader and custom kernel
Domac5 said:
hello last week I installed this rom http://forum.xda-developers.com/showthread.php?t=1444858 and it was fine...then I want to get back to stock rom and I instaled fw .58...then update notification comes up to fw .62...I accepted that update and my device should reebot...but it didn't...I think that he is bricked...then I try to flash that custom rom via flashtool and phone connect automatic in flash mode without pressing volume down+power button...when I try to turn on the phone green led blink...when I put phone on charger green led light still blink...any ideas how to unbrick?
sorry for my bad english
Click to expand...
Click to collapse
if guys still on issues one and only best idea to overcome the problem is to relock the bootloader. it can be flashed using flashtool like we do for .tft files or sin files. try it out it really worked for those regreting OTA updates.
Sorry u are stuck
Domac5 said:
hello last week I installed this rom http://forum.xda-developers.com/showthread.php?t=1444858 and it was fine...then I want to get back to stock rom and I instaled fw .58...then update notification comes up to fw .62...I accepted that update and my device should reebot...but it didn't...I think that he is bricked...then I try to flash that custom rom via flashtool and phone connect automatic in flash mode without pressing volume down+power button...when I try to turn on the phone green led blink...when I put phone on charger green led light still blink...any ideas how to unbrick?
sorry for my bad english
Click to expand...
Click to collapse
Ur phone cannot be used with custom roms.
just install The default .58 firmware root if u need and update to .62 (do as intructed on this post linked below)
link - http://forum.xda-developers.com/showthread.php?t=1559685
Say thank if i helped u
LIVE with walkman
Domac5 said:
it works
i flashed Xperia 2011 Range_FreeXperia_ALL.ftf and my phone works...thank god
Click to expand...
Click to collapse
hi
i am facing the same problem like yours, i flashed my mobile with a LWW FTF file using a flash tool.
now , if i switch ON the mobile green notification light will blink slightly and there is no response, i tried CWM using coconut, SEUS, different LWW kernels, given to service centers etc but still have the same problem.i unlocked the phone officially while the phone with this problem.
pls reply me how you rectified your problem.
Domac5 said:
but they took my warranty papers and cancel guarantee...what a bastards
Click to expand...
Click to collapse
WTF really ... Now that cruel they cannot cancel your warranty mahn..
I got the same problem
Domac5 said:
it works
i flashed Xperia 2011 Range_FreeXperia_ALL.ftf and my phone works...thank god
Click to expand...
Click to collapse
hello,
hi i got the same issue. when connected my phone to PC green led is keeping on (not blinking). and when i connected to charger or pressing the power button green led is blinking and the device is totally turned off. so i have reed this post. so can you please tell me what tool you have used to flash the Xperia 2011 Range_FreeXperia_ALL.ftf firmware and how did u installed that can you please send me a tutorial about it. i am really eager to see it working...please help me bro.....
Thank you,
Naga
Hi there. First of all, sorry about my english, but i'm spanish
I was reading a lot, and i cant find a solution to my phone. It sudently becomes a brick just when charging (with anothers phone charger) and the battery was lower than 10%
It doesn't work, and don't response to any of all solutions i've read (Take out SIM, SD card, remove battery and wait... ) no way... Screen never come back to iluminate again. Just, when pushing power buttom, the phone's vibrates.
So tired of the brick, i've arrived at this page. And I read this post:
http://forum.xda-developers.com/showthread.php?t=1568792
And try to become my phone back...
At least, the phone enter in flashmode, and i can flash with flashtools... but the phone never come back... just the brick
I tryed to flash with the Xperia_2011_FreeXperia_ALL.ftf file and OK
Afther that, take out the USB and flash again with one ROM i get from here:
Xperia Mini Pro (SK17i)
4.0.2.A.0.42 - http://www.mediafire.com/?hevz3x5w9pqt24q
4.1.B.0.431 - http://www.mediafire.com/?j0bdx06zz5skvzt
But the phone never works. One time afther flashing with 4.0.2.A.0.42 i noticed, that trying to power on the phone, the red led shyne 3 times, and thats supposed to be the battery. But i don't know if the battery now is charged. I've left it hours charging, and hours too to the USB...
Supposedly, i cant flash without battery in the phone, but flashtools finish correctly
So... any idea?
There is something i can do?
Thank all of you who read this!
Its probably battery empty. recharge battery or get a friends and try
Sent from my X8 using Tapatalk 2
First make sure that your battery is really fine. Try another one.
If that fails, see if you can get your device into flash mode?(Switched off+Vol Down + USB cable)
If yes, try flashing a custom ROM. For example, download CyanogenMod from here, use Flashtool (guide) to flash the kernel provided in the downloaded ROM's ZIP file. Then, boot again into Clockword Mod Recovery(Keep pressing Vol DOwn button while boot or google for how to enter recovery for your phone). Copy the downloaded Cyanogenmod ZIP to SD card and install it via ClockwordMod recovery.
See if the above works.
bandarigoda123 said:
Its probably battery empty. recharge battery or get a friends and try
Sent from my X8 using Tapatalk 2
Click to expand...
Click to collapse
But, if it was problem of battery, i suppose, that i can't finish flashing with flashtoolts. Not?
Milven said:
But, if it was problem of battery, i suppose, that i can't finish flashing with flashtoolts. Not?
Click to expand...
Click to collapse
Try booting up your phone with the USB connector plugged in the PC (maybe it will charge the battery then)
Milven said:
But, if it was problem of battery, i suppose, that i can't finish flashing with flashtoolts. Not?
Click to expand...
Click to collapse
At least my phone (LWW WT19i does not work without the battery with Flashtool. I'm not sure about your device.
Anyway try flashing a custom ROM like I said. Try unlocking bootloader first though from here
U said that red light show when try to on the phone.
Just try another battery.. It should work
Sent from my X8 using Tapatalk 2
You said LED blinks 3 times so if the color of LED is RED then it indicates empty battery..
Hey, my problem wasnt the same as yours, but it helped for me when i got only service logo on screen.
On this link you find a "Play_v1.01_TA brick fix UPDATE" zip.
Download, unpack and flash it.
http://forum.xda-developers.com/showthread.php?t=1126358&page=10
I hope it will help u.
Milven said:
Hi there. First of all, sorry about my english, but i'm spanish
I was reading a lot, and i cant find a solution to my phone. It sudently becomes a brick just when charging (with anothers phone charger) and the battery was lower than 10%
It doesn't work, and don't response to any of all solutions i've read (Take out SIM, SD card, remove battery and wait... ) no way... Screen never come back to iluminate again. Just, when pushing power buttom, the phone's vibrates.
So tired of the brick, i've arrived at this page. And I read this post:
http://forum.xda-developers.com/showthread.php?t=1568792
And try to become my phone back...
At least, the phone enter in flashmode, and i can flash with flashtools... but the phone never come back... just the brick
I tryed to flash with the Xperia_2011_FreeXperia_ALL.ftf file and OK
Afther that, take out the USB and flash again with one ROM i get from here:
Xperia Mini Pro (SK17i)
4.0.2.A.0.42 - http://www.mediafire.com/?hevz3x5w9pqt24q
4.1.B.0.431 - http://www.mediafire.com/?j0bdx06zz5skvzt
But the phone never works. One time afther flashing with 4.0.2.A.0.42 i noticed, that trying to power on the phone, the red led shyne 3 times, and thats supposed to be the battery. But i don't know if the battery now is charged. I've left it hours charging, and hours too to the USB...
Supposedly, i cant flash without battery in the phone, but flashtools finish correctly
So... any idea?
There is something i can do?
Thank all of you who read this!
Click to expand...
Click to collapse
Hi Milven,
I got the same problem with you yesterday. Few hours sitting in front of my PC and hopeless.
I tried everything same as yours, finally I found and solve the case.
Install this http://www.sonymobile.com/global-en/tools/update-service/
And let it update your phone.
Done. It's back to brand new.
Hope you read this.
frdnoer said:
Hi Milven,
I got the same problem with you yesterday. Few hours sitting in front of my PC and hopeless.
I tried everything same as yours, finally I found and solve the case.
Install this http://www.sonymobile.com/global-en/tools/update-service/
And let it update your phone.
Done. It's back to brand new.
Hope you read this.
Click to expand...
Click to collapse
That's true. Try fixing it by using sony repairment. I did it and it worked for my phone. I hope it does for you
Sent from my Xperia, Asri Aisyah El Zahra
i've the same problem as you. charge your battery with desktop charger. not too long, i put the battery and flash firmware in flashtool. and it work. when the flashing done and the device on, my battery just 3% lol. flashing with flashtool only takes a few minutes
Hello guys, it's been a long time since my phone got bricked. Not sure if it's soft or hard bricked. I was on the plane and using the phone just fine and I turned it off for landing and the phone is stuck at the Sony Logo ever since. I was able to get into the CWM recovery and reinstall the rom I was on, which I had for months and even use the AROMA installer (touching didn't work though so I used the volume buttons). I unlocked the bootloader. I installed other kernels. I relocked it. I flashed many official roms. Seus would not let me update the phone because I have the latest version even though I install old versions using Flashtool. Could it be a hardware problem? Should I just throw the phone in the trash?. I don't want to buy a new phone right now because I am studying abroad in 3 months and I will be getting a branded phone (can't decide between HTC ONE and S4 )
Do you know anything about testpoints and such? Also is this considered a soft or hard bricked phone? thanks
neofyt05 said:
Hello guys, it's been a long time since my phone got bricked. Not sure if it's soft or hard bricked. I was on the plane and using the phone just fine and I turned it off for landing and the phone is stuck at the Sony Logo ever since. I was able to get into the CWM recovery and reinstall the rom I was on, which I had for months and even use the AROMA installer (touching didn't work though so I used the volume buttons). I unlocked the bootloader. I installed other kernels. I relocked it. I flashed many official roms. Seus would not let me update the phone because I have the latest version even though I install old versions using Flashtool. Could it be a hardware problem? Should I just throw the phone in the trash?. I don't want to buy a new phone right now because I am studying abroad in 3 months and I will be getting a branded phone (can't decide between HTC ONE and S4 )
Do you know anything about testpoints and such? Also is this considered a soft or hard bricked phone? thanks
Click to expand...
Click to collapse
I think its a hardware problem.coz the touch screen is not working.
Sent from my WT19i using xda app-developers app
neofyt05 said:
Hello guys, it's been a long time since my phone got bricked. Not sure if it's soft or hard bricked. I was on the plane and using the phone just fine and I turned it off for landing and the phone is stuck at the Sony Logo ever since. I was able to get into the CWM recovery and reinstall the rom I was on, which I had for months and even use the AROMA installer (touching didn't work though so I used the volume buttons). I unlocked the bootloader. I installed other kernels. I relocked it. I flashed many official roms. Seus would not let me update the phone because I have the latest version even though I install old versions using Flashtool. Could it be a hardware problem? Should I just throw the phone in the trash?. I don't want to buy a new phone right now because I am studying abroad in 3 months and I will be getting a branded phone (can't decide between HTC ONE and S4 )
Do you know anything about testpoints and such? Also is this considered a soft or hard bricked phone? thanks
Click to expand...
Click to collapse
The touch in aroma won't work I guess, as far as I know you have to use the volume buttons/home button in aroma, that's normal
So did you try to flash the stock gingerbread/ics rom and it even didn't boot up? Have you tried charging the battery?
mihahn said:
The touch in aroma won't work I guess, as far as I know you have to use the volume buttons/home button in aroma, that's normal
So did you try to flash the stock gingerbread/ics rom and it even didn't boot up? Have you tried charging the battery?
Click to expand...
Click to collapse
I managed to flash a rom using aroma with the volume buttons and everything went ok but the phone still got stuck at Sony logo. I have tried everything. Charging, full decharging, installing roms and kernels. Still nothing.
neofyt05 said:
I managed to flash a rom using aroma with the volume buttons and everything went ok but the phone still got stuck at Sony logo. I have tried everything. Charging, full decharging, installing roms and kernels. Still nothing.
Click to expand...
Click to collapse
not sure.. but try this one below.... flash a ics kernel of your choice first then using latest version of flashtool connect your phone to pc in Flashmode and flash this ftf file below
DOWNLOAD:Unbrick Your Xperia
let me know if it works!!
aneel3692001 said:
not sure.. but try this one below.... flash a ics kernel of your choice first then using latest version of flashtool connect your phone to pc in Flashmode and flash this ftf file below
DOWNLOAD:Unbrick Your Xperia
let me know if it works!!
Click to expand...
Click to collapse
thanks but it didn't work
I did updated my phone to ICS the day i bought it.
I used the bluetooth numerous number of times, but never had any problem,
but day b4 yesterday i used the sony factory widget to turn on bluetooth, i dont remember if i did used it before to turn bluetooth on or not.
The phone stopped responding for 2 sec, i thought its normal for android, and then it restarted.Until that point it was normal..
But then its stuck in bootloop.....
i saw various posts and have seen people have got to boot into system once in a while....
but bad for my luck i am trying from 24hrs... but no luck...
out of 10 boots or when battery is removed from phone from long time, phone shows lock screen for a milisecond and goes back to XPERIA logo and same story continues...
FYI: i had previous soft brick when used OTA update but got rid of it using "UnbrickingXperia2011.zip",
Please help me,,, i cant imagine a day without my best phone...
Try to flash the stock .587 software using flashtool
Sent from my SK17i using XDA Premium 4 mobile app
i dont want to delete my data bro....
dats d problem, do u knw how to flash withput deleting data...
Aneel said:
Try to flash the stock .587 software using flashtool
Sent from my SK17i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
tauqeerzahir said:
i dont want to delete my data bro....
dats d problem, do u knw how to flash withput deleting data...
Click to expand...
Click to collapse
Try to untick data while flashing with flashtool (I am not responsible even if u loose your even after unticking data :angel: )
tauqeerzahir said:
I did updated my phone to ICS the day i bought it.
I used the bluetooth numerous number of times, but never had any problem,
but day b4 yesterday i used the sony factory widget to turn on bluetooth, i dont remember if i did used it before to turn bluetooth on or not.
The phone stopped responding for 2 sec, i thought its normal for android, and then it restarted.Until that point it was normal..
But then its stuck in bootloop.....
i saw various posts and have seen people have got to boot into system once in a while....
but bad for my luck i am trying from 24hrs... but no luck...
out of 10 boots or when battery is removed from phone from long time, phone shows lock screen for a milisecond and goes back to XPERIA logo and same story continues...
FYI: i had previous soft brick when used OTA update but got rid of it using "UnbrickingXperia2011.zip",
Please help me,,, i cant imagine a day without my best phone...
Click to expand...
Click to collapse
Go to CMW and then wipe catch and dalvik!!...it will boot into device but once you turn on bluetooth again then the whole thing starts up again!...
kernel?and rom?
Go back to GB if this is your everyday phone then i suggest a stable and reliable OS(I've had some bad experiences with ICS and JB but then again those are mine and my own views. Footnote:This was not to down play any devs :angel: )
I have same problem, just wipe dalvik cache and then after reboot install this "bluetooth fix repair" https://play.google.com/store/apps/details?id=com.phk.bluetoothfixrepair
just click everytime before turn on your bluetooth.
tauqeerzahir said:
I did updated my phone to ICS the day i bought it.
I used the bluetooth numerous number of times, but never had any problem,
but day b4 yesterday i used the sony factory widget to turn on bluetooth, i dont remember if i did used it before to turn bluetooth on or not.
The phone stopped responding for 2 sec, i thought its normal for android, and then it restarted.Until that point it was normal..
But then its stuck in bootloop.....
i saw various posts and have seen people have got to boot into system once in a while....
but bad for my luck i am trying from 24hrs... but no luck...
out of 10 boots or when battery is removed from phone from long time, phone shows lock screen for a milisecond and goes back to XPERIA logo and same story continues...
FYI: i had previous soft brick when used OTA update but got rid of it using "UnbrickingXperia2011.zip",
Please help me,,, i cant imagine a day without my best phone...
Click to expand...
Click to collapse
turn on your phone and plug to pc via usb with conditions bootloop
open androidsdk\tool\monitor.bat
on the tab file explorer
goto system\bin
pull bluetoothd
delete bluetoothd
push bluetoothd where you saved earlier
turn off your phone
turn on again
now your phone not bootloop but bluetoot not work.
open root explorer goto data\misc
delete folder bluetoothd.
goto system\bin
bluetoothd set permissions rwxr-xr-x
reboot your device
and now what happens?
Sorry for my english but I'm using Google translate
gamer.11 said:
Go to CMW and then wipe catch and dalvik!!...it will boot into device but once you turn on bluetooth again then the whole thing starts up again!...
kernel?and rom?
Go back to GB if this is your everyday phone then i suggest a stable and reliable OS(I've had some bad experiences with ICS and JB but then again those are mine and my own views. Footnote:This was not to down play any devs :angel: )
Click to expand...
Click to collapse
can you help me, i was flash kernel to my device but when i'm finished my device cannot turn on just black screen. i try go to CWM, is can't to
fastbot mod can
ululpotter said:
can you help me, i was flash kernel to my device but when i'm finished my device cannot turn on just black screen. i try go to CWM, is can't to
fastbot mod can
Click to expand...
Click to collapse
Use this kernel: here
Download and flash this ROM: here