Hi everyone,
I apologize in advance if a thread like this exists already, but I've been searching for a while now and can't find anything to answer my questions.
So, first of all, is there any way to fully format the memory on the phone without erasing required system files? I don't care about the ROM, but want to keep the boot loader(that's the thing that lets you boot into recovery/download mode, right?).
I basically want to erase any trace of anything on the phone except for the recovery mode options. From there, I would like to install a clean version of Android. Which brings me to my next question, which I have not found an answer to anywhere.
Is there a stable version of ICS for the Canadian I9100M? I realize that the M-version is the same as the regular I9100 version, but I'm not sure if there is something that would cause the OS to bug out. That beign said, would the modems which come pre-bundled with the European OS versions (which are the only ones out right now) work on the North American bands?
Lastly, is there any back-up software that would allow me to take an image of the drive to recover from at a later date? I.e. ICS doesn't work for me and I want to revert back to what I have now.
Thanks in advance.
Happydude666 said:
Hi everyone,
I apologize in advance if a thread like this exists already, but I've been searching for a while now and can't find anything to answer my questions.
So, first of all, is there any way to fully format the memory on the phone without erasing required system files? I don't care about the ROM, but want to keep the boot loader(that's the thing that lets you boot into recovery/download mode, right?).
I basically want to erase any trace of anything on the phone except for the recovery mode options. From there, I would like to install a clean version of Android. Which brings me to my next question, which I have not found an answer to anywhere.
Is there a stable version of ICS for the Canadian I9100M? I realize that the M-version is the same as the regular I9100 version, but I'm not sure if there is something that would cause the OS to bug out. That beign said, would the modems which come pre-bundled with the European OS versions (which are the only ones out right now) work on the North American bands?
Lastly, is there any back-up software that would allow me to take an image of the drive to recover from at a later date? I.e. ICS doesn't work for me and I want to revert back to what I have now.
Thanks in advance.
Click to expand...
Click to collapse
first of all, do u have ur device rooted?? if so u must have cwmr. entering in cwmr (with ur phone off, press and keep pressing until galaxyy gt-I9100 logo appears, volume up+home button+ power button) and in there u r going to have an option to do a nandroid back up...that's the tool u r looking for, to make an image of ur phone exactly how it is now.
second, inm there u'll have an option (into mount and storage option) to format "/system", that's the option to eliminate any trace of ur actual rom.
at final, u can download any rom from here http://forum.xda-developers.com/showthread.php?t=1544487 and flash it through odin.
modem can be flashed separetly, u can even use the same modem that u have now...so look for the file of ur actual modem, and after flashing rom, flash that modem or the one u wish
EDIT: DUNNO IF I9000 IS THE SAME AS I9000M, YOU SHOULD FIND OUT THAT FIRST THE ROMS, IN THAT THREAD ARE FOR I9000
pelpa87 said:
first of all, do u have ur device rooted?? if so u must have cwmr.
Click to expand...
Click to collapse
Not necessarily true. You can be rooted and not have CWM recovery.
pelpa87 said:
EDIT: DUNNO IF I9000 IS THE SAME AS I9000M, YOU SHOULD FIND OUT THAT FIRST THE ROMS, IN THAT THREAD ARE FOR I9000
Click to expand...
Click to collapse
If you meant I9100 and I9100M, they are AFAIK functionally the same phone. But flashing an I9100 firmware to an I9100M will result in the boot screen and About Phone to both read as I9100 afterwards, instead of I9100M.
ctomgee said:
Not necessarily true. You can be rooted and not have CWM recovery.
If you meant I9100 and I9100M, they are AFAIK functionally the same phone. But flashing an I9100 firmware to an I9100M will result in the boot screen and About Phone to both read as I9100 afterwards, instead of I9100M.
Click to expand...
Click to collapse
Welll then change the "must" for a "should" just to be more specific........
and, yeah, i say i don't know if they are the same, and put it in red saying that he first should find out.... i just put a rom solution for a I9000, just in case he finds out that are the same.
all other steps are the same for both devices.....
Thanks for the replies so far. I do have CWM installed and I am rooted. I have also previously installed I9100 firmware from http://forum.xda-developers.com/showthread.php?t=1075278 with no problems. The Bell Canada version of Android is horribly behind. Was causing massive battery drain issues.
Anyway, I will try the system format stuff. Will this erase all folders, etc and leave the drive empty and clean?
I'm currently running Cyanogenmod 7.1, but it's causing some instability and freezes my phone from time to time. I want to reformat to get rid of any old system files that me be left over from my numerous experiments with ROMs.
Happydude666 said:
Thanks for the replies so far. I do have CWM installed and I am rooted. I have also previously installed I9100 firmware from http://forum.xda-developers.com/showthread.php?t=1075278 with no problems. The Bell Canada version of Android is horribly behind. Was causing massive battery drain issues.
Anyway, I will try the system format stuff. Will this erase all folders, etc and leave the drive empty and clean?
I'm currently running Cyanogenmod 7.1, but it's causing some instability and freezes my phone from time to time. I want to reformat to get rid of any old system files that me be left over from my numerous experiments with ROMs.
Click to expand...
Click to collapse
Yeap with system format is enough.. u could erase ir kernel to..with a kernel cleanner...
Can i recomend u a rom? Try rootbox rom...
When i get to work i ll give u both links, kernel cleaner and rootbox one
Sent from my GT-I9100 using xda premium
make your choise
pelpa87 said:
Yeap with system format is enough.. u could erase ir kernel to..with a kernel cleanner...
Can i recomend u a rom? Try rootbox rom...
When i get to work i ll give u both links, kernel cleaner and rootbox one
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
from cwm you have to do wipe dalvik cache, cache partition and system / factory reset (if you want to clear all your information).
You have to do this when you move from a rom to another rom.
And the magic of xda is the variety of ROM's.
Personally i don't like ROOTBOX, i prefer CM9 or Paranaoid. You should try and make your choise. There are two list of ROM's:
http://forum.xda-developers.com/showthread.php?t=1702166
http://forum.xda-developers.com/showthread.php?t=1529173
For dual boot flash SiyahKernel: http://forum.xda-developers.com/showthread.php?t=1680851
I use this to try rom's as secondary, and i always have my CM9 as primary.
Ok...so I think I may have gone a wee bit too quick.
I've downloaded Zip files of cMIUI and official MIUI from their website. I then proceeded to format the phone...and now I can get into CWM recovery & download modes, but Odin doesn't recognize the ZIP files.
Anyway for me to install these ROMs at this point? Response needed ASAP Please. >.<
Thanks everyone.
Happydude666 said:
Ok...so I think I may have gone a wee bit too quick.
I've downloaded Zip files of cMIUI and official MIUI from their website. I then proceeded to format the phone...and now I can get into CWM recovery & download modes, but Odin doesn't recognize the ZIP files.
Anyway for me to install these ROMs at this point? Response needed ASAP Please. >.<
Thanks everyone.
Click to expand...
Click to collapse
Odin never recognize zip files...odin flash tar files...check inside the zip should be tar file(s)...if.not..if there ir only folders and other files, then its flashable trhough cwmr
Sent from my GT-I9100 using xda premium
be aware that tar files are also compress files, so ur compressor manager maybe will reconize them as so
Sent from my GT-I9100 using xda premium
I ended up restoring from CWMR back up. The ZIP files contain other files and folders, so I'm assuming it's one of those you have to copy onto the SD Card and flash with CWMR.
I'll try that when I get back to work on Monday as that's where all my files are.
Happydude666 said:
I ended up restoring from CWMR back up. The ZIP files contain other files and folders, so I'm assuming it's one of those you have to copy onto the SD Card and flash with CWMR.
I'll try that when I get back to work on Monday as that's where all my files are.
Click to expand...
Click to collapse
Exactly! U have to flash it trhough cwme
Sent from my GT-I9100 using xda premium
pelpa87 said:
Yeap with system format is enough.. u could erase ir kernel to..with a kernel cleanner...
Can i recomend u a rom? Try rootbox rom...
When i get to work i ll give u both links, kernel cleaner and rootbox one
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Is this the one you were referring to? http://forum.xda-developers.com/showthread.php?t=1696419&highlight=rootbox
I don't like cMIUI very much . Lots of settings that are still in Chinese and it's obviously not configured for North-America.
Happydude666 said:
Is this the one you were referring to? http://forum.xda-developers.com/showthread.php?t=1696419&highlight=rootbox
I don't like cMIUI very much . Lots of settings that are still in Chinese and it's obviously not configured for North-America.
Click to expand...
Click to collapse
Yeah!! Try it out
Sent from my GT-I9100 using xda premium
Related
Hi Guys,
I'm new to this Forum and very new to Android. I have the Galaxy S2 and while attempting to install Clock Work Mod, following the instructions from GalaxyS2Root, all of a sudden the phone locked up at the Samsung Galaxy S2 sceen with the yellow exclamation mark and that's as far as I got.
With great difficulty, I can get into the recovery screen, but I haven't got a clue, what I can do from here.
Is the phone recoverable, or have I just destroyed a brand new phone? I don't have a rom zip on my sd card, so I couldn't install a new rom from the card.
I have tried everything to get it going again, but I think the more things I try, the worse it gets. I think I have now wiped the existing rom off completely and wiped the caches, all because I was panicing.
I even thought of removing my sd card, putting it into my wifes Galaxy Ace and downloading a replacement rom to it and then try to install the new rom back to my phone.
But guys, I'm really panicing here and don't know what to do!!
Can anybody please help me out, or do I now throw a brand new phone into the garbage?
Thank You.............dixie (Help Please)
dixielee said:
Hi Guys,
I'm new to this Forum and very new to Android. I have the Galaxy S2 and while attempting to install Clock Work Mod, following the instructions from GalaxyS2Root, all of a sudden the phone locked up at the Samsung Galaxy S2 sceen with the yellow exclamation mark and that's as far as I got.
With great difficulty, I can get into the recovery screen, but I haven't got a clue, what I can do from here.
Is the phone recoverable, or have I just destroyed a brand new phone? I don't have a rom zip on my sd card, so I couldn't install a new rom from the card.
I have tried everything to get it going again, but I think the more things I try, the worse it gets. I think I have now wiped the existing rom off completely and wiped the caches, all because I was panicing.
I even thought of removing my sd card, putting it into my wifes Galaxy Ace and downloading a replacement rom to it and then try to install the new rom back to my phone.
But guys, I'm really panicing here and don't know what to do!!
Can anybody please help me out, or do I now throw a brand new phone into the garbage?
Thank You.............dixie (Help Please)
Click to expand...
Click to collapse
Just flash a new firmware via odin.It will be new again
Sent from my GT-I9300 using xda app-developers app
Hello,
You could try downloading the rom required and install using odin.
You will need to make sure you get the right version for your phone and use odin to flash.
I've not done exactly what you have before I got into a simple boot loop and had to re flash. Live and learn I guess!
http://forum.xda-developers.com/showthread.php?t=1457458
Sent from my GT-I9100 using Tapatalk 2
Thin_Bezel said:
Just flash a new firmware via odin.It will be new again
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply,
But how do I connect my phone to Odin and what menu should the phone be in, in the recovery mode?
Doesn't the phone have to be in the download mode?
I can only seem to get into the basic recovery mode, ie volume up + power + home keys.
Regards..............dixie.
Have you tried to get into download mode (volume down + home + power)?
You should be able to do that if you can get into recovery. Once in download mode, connect to your PC, start Odin and choose PDA, then select the tar that you have downloaded (it will be in zip form until you unpack it).
Read some threads about Odin/Download mode before you start and make sure you are happy to proceed.
killall said:
Have you tried to get into download mode (volume down + home + power)?
You should be able to do that if you can get into recovery. Once in download mode, connect to your PC, start Odin and choose PDA, then select the tar that you have downloaded (it will be in zip form until you unpack it).
Read some threads about Odin/Download mode before you start and make sure you are happy to proceed.
Click to expand...
Click to collapse
O'k I did as you told me, but the first strange thing is, when I extract the zip file I get the following: boot.bin, cache, factory fs, hidden, modem.bin, param.lfs, Sbl.bin and zImage.............there is no exe type file!!!
However if I open odin, click on PDA and enter the whole zip file location and press start, everything goes ahead as planned.
I get a "Pass" and the phone restarts, I get the small tune and the blue moving lights on the screen, but then it just jams up, on the S Samsung Galaxy S2 screen. That's as far as the boot sequence goes.......frozen on the Galaxy S2 Screen!!
Any suggestions?
Regards......................dixie.
Pull out the battery, wait a few seconds replace and try to boot again. If that doesn't work, check you have the correct firmware to flash and try again with Odin.
Or have a look at this thread:
http://forum.xda-developers.com/showthread.php?t=1457458
Right, for starters you need to give relevant information if you expect accurate help otherwise you're going to end up screwing your device up.
Which model of S2 do you have?
Which rom do you have? (give link)
Which guide did you follow? (give link)
If you can get into cwm its just a case of "wipe data/factory reset" and then flash custom rom of your choice from sdcard. Just go into cwm>mounts&storage>mount USB (this will mount cards onto PC if connected) so once connected copy your rom across.
I recommend the new wannam lite rom if you want new samsung JB based rom.
If you want to flash via ODIN then you should only be flashing a .tar or .md5 file in PDA section. If your extracting a zip and you get all the files you mentioned in your above reply then you have wrong file.
TheATHEiST said:
Right, for starters you need to give relevant information if you expect accurate help otherwise you're going to end up screwing your device up.
Which model of S2 do you have?
Which rom do you have? (give link)
Which guide did you follow? (give link)
If you can get into cwm its just a case of "wipe data/factory reset" and then flash custom rom of your choice from sdcard. Just go into cwm>mounts&storage>mount USB (this will mount cards onto PC if connected) so once connected copy your rom across.
I recommend the new wannam lite rom if you want new samsung JB based rom.
If you want to flash via ODIN then you should only be flashing a .tar or .md5 file in PDA section. If your extracting a zip and you get all the files you mentioned in your above reply then you have wrong file.
Click to expand...
Click to collapse
O'k thank you for your reply and thank you to the others that replied.
I was using an incorrect rom to flash and an incomplete rom at that!
I downloaded a different rom, extracted the files and flashed with odin. Now I am up and running and have the phone back to full woking order.
That was pretty scarery stuff and I thought I had bricked the phone for ever, I guess a little knowledge is helpful but dangerous, if one isn't sure of what they are doing.
Thank you once again for your help, it was much appreciated. I'll contact you again no doubt, next time I create a stuff up.
Regards.................dixie.
Hi Guys, one last request. I would like to root the phone and after a considerable amount of reading/research, the root file that I require, seems impossible to find. When I do find it and download, the .rar file is empty except for a zImage file!!!
My phone is the Galaxy S2 i9100 running ICS 4.0.3 Baseband Version i9100XXLPQ Kernel Version 3.0.15-i9100XXLPQ-CL223505 Build Number IML74K.XXLPQ.
I bought this phone, while I was visiting China and it has been great, up until I managed to brick it by accident.
Anyway, I apparently need the CF Root for XXLPQ v5.4, which I have downloaded six times, from various sites and every time I extract, it's empty, except for an image file!!!
I live in Australia and use the Telstra Network.....should I change to a more suitable Firmware, or maybe a stable custom rom, or can someone give me a link, for the appropriate working CF Root file?
Much Appreciate and Thank You........dixie.
Ignore the above post guys, a little more reading and I found my mistake.
However, I am still interested in the suggestion of a Custom Rom, which would work successfully, on Australian Networks.
Cheers to All......dixie.
dixielee said:
Hi Guys, one last request. I would like to root the phone and after a considerable amount of reading/research, the root file that I require, seems impossible to find. When I do find it and download, the .rar file is empty except for a zImage file!!!
My phone is the Galaxy S2 i9100 running ICS 4.0.3 Baseband Version i9100XXLPQ Kernel Version 3.0.15-i9100XXLPQ-CL223505 Build Number IML74K.XXLPQ.
I bought this phone, while I was visiting China and it has been great, up until I managed to brick it by accident.
Anyway, I apparently need the CF Root for XXLPQ v5.4, which I have downloaded six times, from various sites and every time I extract, it's empty, except for an image file!!!
I live in Australia and use the Telstra Network.....should I change to a more suitable Firmware, or maybe a stable custom rom, or can someone give me a link, for the appropriate working CF Root file?
Much Appreciate and Thank You........dixie.
Click to expand...
Click to collapse
I'm still new myself here but i'm sure ur phone is already rooted from what u said above. When u boot into recovery does stock recovery load or CWM ? if anything other than stock Samsung recovery then your already rooted.
Also u dont need to unzip the rar file its ready as is.
If ur phone is actually not rooted by far the easiest method is here http://forum.xda-developers.com/showthread.php?t=1501719
u dont need an insecure kernel and theres no risk involved even if u mess up. I was a lil hesitant to root my phone but used that method and all went fine, now i've learned so much in the past 2 weeks i'm flashing other kernels and tried lots of roms.
Peace
AnubuRe said:
I'm still new myself here but i'm sure ur phone is already rooted from what u said above. When u boot into recovery does stock recovery load or CWM ? if anything other than stock Samsung recovery then your already rooted.
Also u dont need to unzip the rar file its ready as is.
If ur phone is actually not rooted by far the easiest method is here http://forum.xda-developers.com/showthread.php?t=1501719
u dont need an insecure kernel and theres no risk involved even if u mess up. I was a lil hesitant to root my phone but used that method and all went fine, now i've learned so much in the past 2 weeks i'm flashing other kernels and tried lots of roms.
Peace
Click to expand...
Click to collapse
Yes thanks for the reply. I discovered that I didn't have to extract the root file, as it was already a .tar (stupid me).
So now I have a rooted phone and the Official ICS version XXLPQ, which is working in Australia, but I have noticed, that most of the time the Network is showing "edge".
All I really have to find now, is a good, stable, custom rom, that will also work in Australia.
A couple of observations....
You don't need "a good stable custom rom that will also work in Australia". Region has nothing to do with how a rom performs/your experience with that rom. If you're having issues with connectivity/you're not happy with data speeds, flashing/trying other modems may help. I suggest you read through this thread, at various times people have discussed which modems have worked well with different carriers (particular modems seem to work well for most people using a particular carrier). You can then search for CWM flashable versions of these modems & test them out until you find one that gives you connectivity you're happy with.
The other observation is you're a bit lacking in the 'basics'. I highly recommend you take the time to read through the guides. Knowing the basics makes it less likely you'll bork your phone at some stage, and that you'll be able to solve any problems that come up in a methodical/logical way (as opposed to guessing).
........a bit!!!!!!
Since you are on 4.0 3 ,why don't you flash the official jelly bean XXLS8 update via odin? Than root it with cf root
Sent from my GT-I9300 using xda app-developers app
O'k thanks guys.:good:
Thin_Bezel said:
Since you are on 4.0 3 ,why don't you flash the official jelly bean XXLS8 update via odin? Than root it with cf root
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Use Siyah kernel v6 beta4 instead.
Hello. New to rooting. Root worked well, cool stuff. Then i tried to flash a rom,(probably never again) cyanogen rom said it was unstable on the s3 but i saw posts of slimrom(.net) and it sounded steady.. now i cannot unzip files or flash roms or get any gapps to work. Softbrick i guess its called. Plus my backup isnt on my phone anymore. Do i need to Kies my way out? Any help would be dope. I never thought id want touchwiz so bad. . . Also if kies works will my google apps be back?
Password1 said:
Hello. New to rooting. Root worked well, cool stuff. Then i tried to flash a rom,(probably never again) cyanogen rom said it was unstable on the s3 but i saw posts of slimrom(.net) and it sounded steady.. now i cannot unzip files or flash roms or get any gapps to work. Softbrick i guess its called. Plus my backup isnt on my phone anymore. Do i need to Kies my way out? Any help would be dope. I never thought id want touchwiz so bad. . . Also if kies works will my google apps be back?
Click to expand...
Click to collapse
Gotta tell us wat u did.
Sent from my GT-I9300 using xda app-developers app
Password1 said:
Hello. New to rooting. Root worked well, cool stuff. Then i tried to flash a rom,(probably never again) cyanogen rom said it was unstable on the s3 but i saw posts of slimrom(.net) and it sounded steady.. now i cannot unzip files or flash roms or get any gapps to work. Softbrick i guess its called. Plus my backup isnt on my phone anymore. Do i need to Kies my way out? Any help would be dope. I never thought id want touchwiz so bad. . . Also if kies works will my google apps be back?
Click to expand...
Click to collapse
Like JellyYogurt said we need more detail your post is confusing this is probably a easy fix and you need to read up more on how to flash roms.First of all there is nothing wrong with slimrom I have flashed it many times without any problems..."unzip files" why would you want to unzip files to flash a rom?
Rom's come in a couple of formats zip files which you flash with a custom recovery ( you do not unzip them) or .tar files which you flash with odin (these are normally stock roms).
Can you get into recovery? (If yes perform a factory reset and reboot ) see if that works,if not you mention you have a backup can't you put your backup on ext SD card with a card reader and restore from recovery or do you mean you delated it ?
If you just want to go back to stock touchwiz and not bother with custom roms again just download your phone version from sammobile and flash with odin.Also another misconception is that you said you rooted then tried to flash a rom why? You only need to root your phone if you are going to stay on stock rom and use root apps and not flash custom roms. The reason is 99% of custom roms come already rooted so you can skip rooting your phone yourself.
More detail is needed so people can answer you correctly
tallman43 said:
Like JellyYogurt said we need more detail your post is confusing this is probably a easy fix and you need to read up more on how to flash roms.First of all there is nothing wrong with slimrom I have flashed it many times without any problems..."unzip files" why would you want to unzip files to flash a rom?
Rom's come in a couple of formats zip files which you flash with a custom recovery ( you do not unzip them) or .tar files which you flash with odin (these are normally stock roms).
Can you get into recovery? (If yes perform a factory reset and reboot ) see if that works,if not you mention you have a backup can't you put your backup on ext SD card with a card reader and restore from recovery or do you mean you delated it ?
If you just want to go back to stock touchwiz and not bother with custom roms again just download your phone version from sammobile and flash with odin.Also another misconception is that you said you rooted then tried to flash a rom why? You only need to root your phone if you are going to stay on stock rom and use root apps and not flash custom roms. The reason is 99% of custom roms come already rooted so you can skip rooting your phone yourself.
More detail is needed so people can answer you correctly
Click to expand...
Click to collapse
I flashed the rom using the instructions on slimroms.net. but i think i didnt 'wipe data and cache'. the unzip thing is an example of how unstable it is. I can go recovery. But my comp is broke so i didnt get ro go to sammobile for the files. I created alot of backups with titanium but it seems they are all deleted (didnt move to another device, live and learn). Thanks for the speedy assistance. Ill try odin and sammobile tonight after work. Just figured out how to go back into recovery mode after i made this post.
You have to do a wipe data and format system as they said. Guess u didnt do both?
Sent from my GT-I9300 using xda app-developers app
Password1 said:
I flashed the rom using the instructions on slimroms.net. but i think i didnt 'wipe data and cache'. the unzip thing is an example of how unstable it is. I can go recovery. But my comp is broke so i didnt get ro go to sammobile for the files. I created alot of backups with titanium but it seems they are all deleted (didnt move to another device, live and learn). Thanks for the speedy assistance. Ill try odin and sammobile tonight after work. Just figured out how to go back into recovery mode after i made this post.
Click to expand...
Click to collapse
Ok... Let us know how you get on.
Also titanium only backups up system and user apps it is not a complete backup of your system for that you needed to do a nandroid backup with your recovery (if you don't know what that is there are some stickies threads explaining what it is) Good luck.
tallman43 said:
Ok... Let us know how you get on.
Also titanium only backups up system and user apps it is not a complete backup of your system for that you needed to do a nandroid backup with your recovery (if you don't know what that is there are some stickies threads explaining what it is) Good luck.
Click to expand...
Click to collapse
Okay. Got it. First I had to go to my slimkat settings and check root access etc, thats why nothing worked. then I kept trying to unzip the gapps folder, not knowing it had to be flashed also(stopped reading right before that in the instructions, oops). After i flashed the gapps i could get into playstore np and its running smooth. First rooting attempt alittle panicky but my s3 now has 11.01gbs of storage and all the apps i really need. Thank you both for the quick reply. Sorrying for noobing out back there. Im starting to understand alittle more. Im going to read on back-up/recovery and hopefully be rooting this Gflex on Tuesday.
Good to hear ur fone is working once again
Sent from my GT-I9300 using xda app-developers app
hi hoping someone can help. i have a samsung galaxy s2 i was trying my hand at rooting but now the phone wont do anything but reboot. i even bout one of those jigs. i can get it into download mode i install odin then a kernal i have also an official s2 firmware but no matter what i do it will only reboot constant anyone any ideas or suggestions cheers in advance and if iv cocked up on the tread i appologise in advance
the donkey said:
hi hoping someone can help. i have a samsung galaxy s2 i was trying my hand at rooting but now the phone wont do anything but reboot. i even bout one of those jigs. i can get it into download mode i install odin then a kernal i have also an official s2 firmware but no matter what i do it will only reboot constant anyone any ideas or suggestions cheers in advance and if iv cocked up on the tread i appologise in advance
Click to expand...
Click to collapse
Do you mean you can't even get into recovery? If it can, I would think a data wipe might get the ROM to be able to boot.
the donkey said:
hi hoping someone can help. i have a samsung galaxy s2 i was trying my hand at rooting but now the phone wont do anything but reboot. i even bout one of those jigs. i can get it into download mode i install odin then a kernal i have also an official s2 firmware but no matter what i do it will only reboot constant anyone any ideas or suggestions cheers in advance and if iv cocked up on the tread i appologise in advance
Click to expand...
Click to collapse
You might want to double check if you are using the right version of recovery that kernel is fully supported with your ROM. For example, if you are trying to install a KK ROM using an old version of CWM you will end up in error 7 or end up in a boot loop screen. My words are pretty mess up but I hope you get what I mean. So make sure you have the right version that match each other (recovery, kernel, ROM).
Hope that helps.
im new to all of this. when i hold the home button the power button and the vol down button i get a screen telling me installing a custom os could be bad press up to continue i do this and install even the official software but when it reboots it keeps looping on the samsung logo
cglegion said:
You might want to double check if you are using the right version of recovery that kernel is fully supported with your ROM. For example, if you are trying to install a KK ROM using an old version of CWM you will end up in error 7 or end up in a boot loop screen. My words are pretty mess up but I hope you get what I mean. So make sure you have the right version that match each other (recovery, kernel, ROM).
Hope that helps.
Click to expand...
Click to collapse
i cant access the phone to see what kernal was on it so i am just trying to get it back to normal
the donkey said:
i cant access the phone to see what kernal was on it so i am just trying to get it back to normal
Click to expand...
Click to collapse
I suggest you flash a working recovery via odin first. Look for TWRP, it's the best newbie-friendly recovery or try CWM if you are looking for more advanced options. After that, flash a stock or custom ROM to get your phone back working. Make sure they are compatible with each other. Why didn't it work when you try flashing the stock firmware via odin? Make sure the zip file is downloaded properly.
Hope that helps.
cglegion said:
I suggest you flash a working recovery via odin first. Look for TWRP, it's the best newbie-friendly recovery or try CWM if you are looking for more advanced options. After that, flash a stock or custom ROM to get your phone back working. Make sure they are compatible with each other. Why didn't it work when you try flashing the stock firmware via odin? Make sure the zip file is downloaded properly.
Hope that helps.
Click to expand...
Click to collapse
that sounds excellent but being new and a bit thick what is a twrp and where would i get one?
still no joy
ok so now i have tried 3 official samsung roms h3g o2 and t mobile the h3g installs but just keeps looping the boot screen the o2 failed and the t mobile installes but all i get is a blck screen but it showes the batter the clock and the usb conection i can also go into it through my computer but it wont boot up properly. is it possible to get a samsung rom thats not network based?
the donkey said:
ok so now i have tried 3 official samsung roms h3g o2 and t mobile the h3g installs but just keeps looping the boot screen the o2 failed and the t mobile installes but all i get is a blck screen but it showes the batter the clock and the usb conection i can also go into it through my computer but it wont boot up properly. is it possible to get a samsung rom thats not network based?
Click to expand...
Click to collapse
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
il give it a go
cglegion said:
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
Click to expand...
Click to collapse
il try that just now cheers
ahhh my heed
cglegion said:
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
Click to expand...
Click to collapse
ok so i downloaded the romnuke and the neatrom the instructions say... Boot into Recovery
- Install RomNuke (Does all clean & backup your android folder as well) - Thanks to Hawkerpaul
- Install ROM
- Reboot & Enjoy
but when i unzip the files i cant see any way of gettong romnuke to work i tried odin but it doesnt pick it up is there some other download i need??
still no joy
cglegion said:
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
Click to expand...
Click to collapse
ok so i put the zip files on an sd card and put it in the phone. but when i try and install them it says ignature verification failed also if i try and wipe the date and retore it says faild to mount/efs invalid argument. when i manage to get the t mobile rom to load the screen is black but i can get the swipe down screen to turn on blue tooth or wifi
the donkey said:
ok so i put the zip files on an sd card and put it in the phone. but when i try and install them it says ignature verification failed also if i try and wipe the date and retore it says faild to mount/efs invalid argument. when i manage to get the t mobile rom to load the screen is black but i can get the swipe down screen to turn on blue tooth or wifi
Click to expand...
Click to collapse
This error is most probably because you don't have the right Rom for the right model or not compatible hence the verification error. Are you doing this in recovery mode? Make sure you follow the installation instructions properly and download the right one for your phone model. Just try cyanogenmod for starter. Installation is easy to understand.
still no joy
cglegion said:
This error is most probably because you don't have the right Rom for the right model or not compatible hence the verification error. Are you doing this in recovery mode? Make sure you follow the installation instructions properly and download the right one for your phone model. Just try cyanogenmod for starter. Installation is easy to understand.
Click to expand...
Click to collapse
ok so i went to cyanogenmod downloaded the newest file for the s2 when i did unzip i get 2 folder meta-inf and system plus a boot.img file. i burned the boot file to a disc but when i check it the disk is empty even though i can see its burned. also when i go to sammobile to get firmare it says no files available...therte must be some way of getting this to work H E L PPPPPPPPPPP
Dude, you're not supposed to be burning anything to discs. The zip file is what the recovery uses to install from. It should include the custom kernal too.
Copy the zipped ROM file to your SD card, put it in your phone and boot into recovery. Assuming you've already flashed the latest custom recovery CWM or TWRP (I prefer TWRP)
From here, to be safe, do a full wipe (That's everything except sd-card: system, data, cache, dalvik-cache)
Now you install/flash the zip file via recovery. Hopefully that completes without error. After that clear cache and dalvik-cache again just to be sure (I do this out of habit)
Reboot.
Hope this helps. I saw you mention something about "efs" and that gives me a bad feeling, read something about needing to back that up before bad things happen. But anyway, good luck :good:
LATEST EDIT http://forum.xda-developers.com/showpost.php?p=55161735&postcount=17
EDIT 2: http://forum.xda-developers.com/showthread.php?p=55095194#post55095194
EDIT: I got it rooted now but i would like some help flashing a custom ROM onto it. like what i need to know about it and stuff and which ROMs work for galaxy player 5.0. I was looking at cyanogenmod 11 but and the beanstalk one, but the rear camera doesn't work right i heard. I would kindof like a kitkat rom but if i have to use jellybean then i guess i do. i would like to know which rom is recommended
hey you all i need a little help rooting my galaxy player 5.0. model YP-G70 firmware 2.3.5 kernel version [email protected] #2 build number GINGERBREAD.UEK18
i was gonna use the superoneclick program but it says "file download blocked." isn't shortfuse.org the site to get it from? or where do i get the program?
I had already installed Samsung Kies, but now i need the superoneclick program. I was trying to get version 2.3.3. so what i'm wondering is where and how do you get superoneclick???
I've done a lot of researching which way is the best to root it, and i think superoneclick looks best. please tell me different if i'm wrong ... so yeah... thanks in advance
Your right to try and use superoneclick as a rooting program. Try downloading the most updated version and scan on Norton for viruses. Then open the program, make sure you have USB debugging on and hit root. After that hit yes when you get prompted to test and unplug your device and reboot.
http://m.download.cnet.com/SuperOneClick/3000-2094_4-75447027.html
Here's a link to CNET to download. If diwnlias did not work try looking for it on xda
Sent from my YP-G70 using XDA Free mobile app
troy5890 said:
Your right to try and use superoneclick as a rooting program. Try downloading the most updated version and scan on Norton for viruses. Then open the program, make sure you have USB debugging on and hit root. After that hit yes when you get prompted to test and unplug your device and reboot.
Here's a link to CNET to download. If diwnlias did not work try looking for it on xda
Sent from my YP-G70 using XDA Free mobile app
Click to expand...
Click to collapse
thanks for answering!! i clicked on the link and hit download and it downloaded but it said that chrome blocked, cause it's malicious. (pic below) it shows up under my downloads though. i scanned it with vipre (i use that instead of norton) and it said it was trojan. should i just try to run it anyway or what...
edit: i tried opening it from my downloads and here's what it brings up. pic below
Antivirus saying the package is malicious is perfectly normal. The 2 root exploits used in SuperOneClick are already identified as Android-based trojans in all modern antivirus softwares. If you downloaded from a trusted site, DISABLE your antivirus software and start the rooting process. When you're done, don't forget to turn it back on.
Sent from Google Nexus 4 @ CM11
wow you're right!! I got it rooted!! so i think... i have the app superuser soo yeah... now i wanna flash a custom rom which i have to research or if you all would be kind enough to help me with. i didn't do any research on that yet so i really know nothing. just that i'm missing out on some good stuff i think
Austin68 said:
wow you're right!! I got it rooted!! so i think... i have the app superuser soo yeah... now i wanna flash a custom rom which i have to research or if you all would be kind enough to help me with. i didn't do any research on that yet so i really know nothing. just that i'm missing out on some good stuff i think [/QUOTE
Now that you are rooted it is time for some awesome custom ROMs. There is cm11 you could try by going into the development page and downloading it. But before you flash make sure you have a nandroid back up and you go in this order if you want to run cm11.
Gingerbread, ice cream sandwich, jelly bean, jelly bean 4.3, then cm11. Make sure your recovery is updated when flashing different rims or it might come out as a herring.
Also you could just go straight to KitKat. If you want.
Sent from my YP-G70 using XDA Free mobile app
Click to expand...
Click to collapse
troy5890 said:
Austin68 said:
wow you're right!! I got it rooted!! so i think... i have the app superuser soo yeah... now i wanna flash a custom rom which i have to research or if you all would be kind enough to help me with. i didn't do any research on that yet so i really know nothing. just that i'm missing out on some good stuff i think [/QUOTE
Now that you are rooted it is time for some awesome custom ROMs. There is cm11 you could try by going into the development page and downloading it. But before you flash make sure you have a nandroid back up and you go in this order if you want to run cm11.
Gingerbread, ice cream sandwich, jelly bean, jelly bean 4.3, then cm11. Make sure your recovery is updated when flashing different rims or it might come out as a herring.
Also you could just go straight to KitKat. If you want.
Sent from my YP-G70 using XDA Free mobile app
Click to expand...
Click to collapse
I think he doesn't even have a custom recovery yet and need some guide on that. Unfortunately I couldn't help because I have a Player 4.0 instead of 5.0.
Sent from Google Nexus 4 @ CM11
Click to expand...
Click to collapse
no i don't have a custom recovery or a nandroid backup. not sure how to make them either, but i'll do some checkin' around. also idk which rom to choose. I'm kinda hoping to get 4.4 kitkat if i can, but i'm only on 2.3.5 now soo... i hope i can. i was thinkin' about cygenmod but i've heard that the camera doesn't always work then. and i'm not exactly sure how to get it. If you wanna help me out I'd really appreciate it
The camera works
Sent from my YP-G70 using XDA Free mobile app
I was reading some tutorials for installing CWM recovery. a lot of them say that you would have to flash a kernel with it built into it. and another one says to use rom manager app which I have but the app doesn't support a galaxy player 5.0. so i wanna install it but I don't know how. like there are so many tutorials. flashing a kernel is risky I heard. not sure how i should start
Austin68 said:
I was reading some tutorials for installing CWM recovery. a lot of them say that you would have to flash a kernel with it built into it. and another one says to use rom manager app which I have but the app doesn't support a galaxy player 5.0. so i wanna install it but I don't know how. like there are so many tutorials. flashing a kernel is risky I heard. not sure how i should start
Click to expand...
Click to collapse
Go for the kernel route. Find a CWM'd kernel that supports your current version of stock ROM and flash that. ROM Manager performs badly even on supported devices so don't even think about it.
And... The risk of flashing a kernel/ROM is something you eventually have to get over if you want your device better
Sent from Google Nexus 4 @ CM11
AndyYan said:
Go for the kernel route. Find a CWM'd kernel that supports your current version of stock ROM and flash that. ROM Manager performs badly even on supported devices so don't even think about it.
And... The risk of flashing a kernel/ROM is something you eventually have to get over if you want your device better
Sent from Google Nexus 4 @ CM11
Click to expand...
Click to collapse
ok thanks!! I'll start lookin' for the right kernel if you have any recommendations just let me know =D
ok I downloaded a kernel (didn't flash it yet). I downloaded this kernel > http://forum.xda-developers.com/showthread.php?t=2318550 and i'm gonna download odin to flash it with but i don't think it's a .tar file so will odin work???? also i guess i'll just download the latest version of odin...?? it said that some versions aren't compatible with some devices.
EDIT it's a .zip file. i think you need cwm to flash it. please tell me if i'm wrong. but i don't have cwm. so i think i might have to choose another kernel ??
also will flashing that kernel erase my third-party apps or app data??
and when i get this kernel on, will I be able to run cm11 on here or will i have to get a different kernel to run on that??
also i think this vid might be a good one. but he never says that he does a nandroid backup or anything
https://www.youtube.com/watch?v=mlyTZZVOvag
Austin68 said:
ok I downloaded a kernel (didn't flash it yet). I downloaded this kernel > http://forum.xda-developers.com/showthread.php?t=2318550 and i'm gonna download odin to flash it with but i don't think it's a .tar file so will odin work???? also i guess i'll just download the latest version of odin...?? it said that some versions aren't compatible with some devices.
EDIT it's a .zip file. i think you need cwm to flash it. please tell me if i'm wrong. but i don't have cwm. so i think i might have to choose another kernel ??
also will flashing that kernel erase my third-party apps or app data??
and when i get this kernel on, will I be able to run cm11 on here or will i have to get a different kernel to run on that??
also i think this vid might be a good one. but he never says that he does a nandroid backup or anything
https://www.youtube.com/watch?v=mlyTZZVOvag
Click to expand...
Click to collapse
Yeah this kernel is CWM only, so no go. As far as Odin compatibility goes, no, the latest version won't always work with anything. Use Odin 1.8x if you can (mine is 1.85 for my Player 4.0 and Captivate, should be the same for Galaxy S-family devices).
Kernels don't wipe any of your data, though flashing a wrong kernel which causes bootloop may do.
After flashing the corresponding kernel, get into CWM recovery and start flashing CM or the ROM you want as per the instructions given in the ROM's post. All AOSP-based ROMs run different (and incompatible) kernels than stock so don't worry about kernels once you're in.
Sent from Google Nexus 4 @ CM11
AndyYan said:
Yeah this kernel is CWM only, so no go. As far as Odin compatibility goes, no, the latest version won't always work with anything. Use Odin 1.8x if you can (mine is 1.85 for my Player 4.0 and Captivate, should be the same for Galaxy S-family devices).
Kernels don't wipe any of your data, though flashing a wrong kernel which causes bootloop may do.
After flashing the corresponding kernel, get into CWM recovery and start flashing CM or the ROM you want as per the instructions given in the ROM's post. All AOSP-based ROMs run different (and incompatible) kernels than stock so don't worry about kernels once you're in.
Sent from Google Nexus 4 @ CM11
Click to expand...
Click to collapse
so what kernel should i get? it has to be a Gingerbread one right? since i'm still on stock gingerbread rom. should I use Entropy's Daily Driver? that would be the only other one, right?
and once i get a jellybean or a kk rom wouldn't it be a good idea to get a better kernel?? like one made for a kk or jb? would it be faster? but then i would have to switch kernels if i would for any reason want to go back to stock gb rom??
Austin68 said:
so what kernel should i get? it has to be a Gingerbread one right? since i'm still on stock gingerbread rom. should I use Entropy's Daily Driver? that would be the only other one, right?
and once i get a jellybean or a kk rom wouldn't it be a good idea to get a better kernel?? like one made for a kk or jb? would it be faster? but then i would have to switch kernels if i would for any reason want to go back to stock gb rom??
Click to expand...
Click to collapse
I have a Player 4.0 instead of a 5.0 so unfortunately can't help you with finding the right kernel. Yes it's best for stock Gingerbread, but if you find Froyo ones, they can also be used. Do note that you can't boot into Gingerbread with a Froyo kernel, so use its CWM to flash whatever you want immediately afterwards.
I don't know of any JB/KK custom kernels, and since Player's single core CPU has its limitations, a custom kernel won't make it much better. At least on my IncS, even overclocking to 1.6GHz won't help with KK eating up my resources.
GB, JB, KK - kernels for different versions of Android are usually not cross-compatible, so you *must* switch kernel if you want to fall back to GB.
Sent from Google Nexus 4 @ CM11
AndyYan said:
I have a Player 4.0 instead of a 5.0 so unfortunately can't help you with finding the right kernel. Yes it's best for stock Gingerbread, but if you find Froyo ones, they can also be used. Do note that you can't boot into Gingerbread with a Froyo kernel, so use its CWM to flash whatever you want immediately afterwards.
I don't know of any JB/KK custom kernels, and since Player's single core CPU has its limitations, a custom kernel won't make it much better. At least on my IncS, even overclocking to 1.6GHz won't help with KK eating up my resources.
GB, JB, KK - kernels for different versions of Android are usually not cross-compatible, so you *must* switch kernel if you want to fall back to GB.
Sent from Google Nexus 4 @ CM11
Click to expand...
Click to collapse
thank you very much for your help. i was able to flash a custom kernel and get cwm. thanks you helped a lot
now i got the rom i was gonna flash downloaded it and extracted it. and i shouldn't have extracted it. then i was trying to flash it and i discovered i messed up. so i pulled the sd card out (which i had a complete nandroid backup on.) [the real mistake] and decided to start over. like, put the zipped files on the sd card. so i put the zips (unextracted) onto my micro sd but it can't mount the sd. so i think i'm like screwed. please help me
oh and when i boot all i see is the samsung logo, then it goes straight to cwm recorvery. I can also get into download mode. so I can get into cwm but my recovery is on my micro sd and it can't mount it. (i did a nandroid backup but it doesn't benefit me now. i also have to backup on my pc, but my pc doesn't wanna recognize it) did i brick it??
what i did...went into cwm wipe data/factory reset and wiped it. next > mounts and storage and clicked format system, and formatted it. then last i wiped dalvik cache. then i went to flash the rom (CM9) and it didn't flash. (because i had extracted it on the pc. it no longer was a .zip) don't know what i was thinkin' but yeah...
as of now i'm gonna start looking for threads to fix it.
i don't think samsung kies is working right either. :/ http://i.imgur.com/WV0iBPk.jpg
please help me unbrick it or whatever i need to do. only made one small mistake and now all this... :'( if you know anything about how to fix it pls reply. i need all the help i can get. thanks ...
Austin68 said:
thank you very much for your help. i was able to flash a custom kernel and get cwm. thanks you helped a lot
now i got the rom i was gonna flash downloaded it and extracted it. and i shouldn't have extracted it. then i was trying to flash it and i discovered i messed up. so i pulled the sd card out (which i had a complete nandroid backup on.) [the real mistake] and decided to start over. like, put the zipped files on the sd card. so i put the zips (unextracted) onto my micro sd but it can't mount the sd. so i think i'm like screwed. please help me
oh and when i boot all i see is the samsung logo, then it goes straight to cwm recorvery. I can also get into download mode. so I can get into cwm but my recovery is on my micro sd and it can't mount it. (i did a nandroid backup but it doesn't benefit me now. i also have to backup on my pc, but my pc doesn't wanna recognize it) did i brick it??
what i did...went into cwm wipe data/factory reset and wiped it. next > mounts and storage and clicked format system, and formatted it. then last i wiped dalvik cache. then i went to flash the rom (CM9) and it didn't flash. (because i had extracted it on the pc. it no longer was a .zip) don't know what i was thinkin' but yeah...
as of now i'm gonna start looking for threads to fix it.
i don't think samsung kies is working right either. :/ http://i.imgur.com/WV0iBPk.jpg
please help me unbrick it or whatever i need to do. only made one small mistake and now all this... :'( if you know anything about how to fix it pls reply. i need all the help i can get. thanks ...
Click to expand...
Click to collapse
Easy, bro. Does your current CWM recovery have a "sideload" option? Look for that either in the main menu or in the "install zip from sdcard" section. If you have that, then you could try sideloading a ROM directly from your PC to your device and it will flash automatically. For more instructions, just Google "ADB sideload".
If that doesn't cut it... Grab Odin and a stock GB firmware (these should be floating around in Dev section), flash that by Odin, and your Player gets returned to GB stock condition, where you can start over.
Sent from Google Nexus 4 @ CM11
AndyYan said:
Easy, bro. Does your current CWM recovery have a "sideload" option? Look for that either in the main menu or in the "install zip from sdcard" section. If you have that, then you could try sideloading a ROM directly from your PC to your device and it will flash automatically. For more instructions, just Google "ADB sideload".
If that doesn't cut it... Grab Odin and a stock GB firmware (these should be floating around in Dev section), flash that by Odin, and your Player gets returned to GB stock condition, where you can start over.
Sent from Google Nexus 4 @ CM11
Click to expand...
Click to collapse
no it doesn't have a sideload option anywhere. i have odin. and for the firmware, doesn't it have to be in the .tar form for odin to flash it?? i'll check that out. btw thanks !!
but the computer doesn't wanna recognize my device. so how can i flash anything??
EDIT do you think i could flash my nandroid backup through odin?? it has .tar files and one .md5 file, but 2 that aren't. i'll post a screen shot. but if i flash each of the .tar files and the .md5 file via odin do you think it would work? that file is only a .md5 though and not a .tar.md5 so idk
Austin68 said:
no it doesn't have a sideload option anywhere. i have odin. and for the firmware, doesn't it have to be in the .tar form for odin to flash it?? i'll check that out. btw thanks !!
but the computer doesn't wanna recognize my device. so how can i flash anything??
EDIT do you think i could flash my nandroid backup through odin?? it has .tar files and one .md5 file, but 2 that aren't. i'll post a screen shot. but if i flash each of the .tar files and the .md5 file via odin do you think it would work? that file is only a .md5 though and not a .tar.md5 so idk
Click to expand...
Click to collapse
No, nandroid backups won't be recognized by Odin. Just try finding a stock firmware out there. If you want your data back from your nandroid backup, you can always restore everything to normal first, then restore that nandroid and do whatever you please.
Sent from Google Nexus 4 @ CM11
Okay so ill be honest im super new to all this. I did some research on youtube. I used twrp and a app that is like goolauncher. I did not back up my OS and i accidently deleted it. Im trying to upgrade to the hellfire rom. When i did i get this error in the recovery menu
slow302stang said:
Okay so ill be honest im super new to all this. I did some research on youtube. I used twrp and a app that is like goolauncher. I did not back up my OS and i accidently deleted it. Im trying to upgrade to the hellfire rom. When i did i get this error in the recovery menu
Click to expand...
Click to collapse
You attempted to flash a ROM made for a different phone (d2att), never do that again unless you want a brick.
ArkThompson said:
You attempted to flash a ROM made for a different phone (d2att), never do that again unless you want a brick.
Click to expand...
Click to collapse
my phone is atat did i accidently post this in the wrong section?
slow302stang said:
my phone is atat did i accidently post this in the wrong section?
Click to expand...
Click to collapse
Yea, look at the sticky. Anyway, it is probably something to do with your recovery. Try flashing it using cwm.
lotimaoand
ArkThompson said:
Yea, look at the sticky. Anyway, it is probably something to do with your recovery. Try flashing it using cwm.
Click to expand...
Click to collapse
is that possible with out a os? the recovery deleted the OS so i cant even get onto my phone. I can only get to recovery and get to the odin downloaded thing
slow302stang said:
is that possible with out a os? the recovery deleted the OS so i cant even get onto my phone. I can only get to recovery and get to the odin downloaded thing
Click to expand...
Click to collapse
Yea, you can flash .zip versions of cwm through the recovery menu. You could also flash it through Odin if you can't find a flashable .zip of it, probably easier that way. Don't just flash any .zip of cwm you find through twrp, it has to be one made to be flashed.
ArkThompson said:
Yea, you can flash .zip versions of cwm through the recovery menu. You could also flash it through Odin if you can't find a flashable .zip of it, probably easier that way. Don't just flash any .zip of cwm you find through twrp, it has to be one made to be flashed.
Click to expand...
Click to collapse
i have no idea what that means. Anyway you could talk me througg it? I tryed to download odin but couldnt find a link that worked.
slow302stang said:
i have no idea what that means. Anyway you could talk me througg it? I tryed to download odin but couldnt find a link that worked.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2552640
You should just be able to download the recovery in this topic (.zip not tar.md5) and install it using twrp. Put the file on your external SD since you can't access your phone.
ArkThompson said:
http://forum.xda-developers.com/showthread.php?t=2552640
You should just be able to download the recovery in this topic (.zip not tar.md5) and install it using twrp. Put the file on your external SD since you can't access your phone.
Click to expand...
Click to collapse
I'm a bit confused. Do i just download that recovery? or is their something i have to download I got odin now.
2
okay so i did some youtube searching and alot of videos came up with odin. To download a stock rom . i downloaded a few and tryed to do it with odin and it always failed. ANyone have any ideas? or maybe theirs a way to just fix the hellfire rom?
i managed to figure out the phillz. all it did was change the recovery program to his and now its stock andriod recovery... . their has to be a way for me to odin the stock os system. I wish i could just get into the phone itd be so much easier. lol 50k people online someone help me!
slow302stang said:
i managed to figure out the phillz. all it did was change the recovery program to his and now its stock andriod recovery... . their has to be a way for me to odin the stock os system. I wish i could just get into the phone itd be so much easier. lol 50k people online someone help me!
Click to expand...
Click to collapse
You know that the file that you have to put in odin has to be a ridiculous amount of mb or gb then other things because i made that mistake 2 lol.
You have to extract it when using your pc and stuff and sometimes you get others files like ones that arent even like 100 mb or whatever that can look like a rom.
Give me a full list of evrything you exactly do when flashing and wich file and name and how big the file is and also your model number... The s3 ATT right?
Can someone verify for me that att has an own bootloader and stuff and you can only like odin flash their stock roms right?
You can always use phillz touch recovery and download a custom rom like cyanogenmod for your phone! Then you can acces it... If you dont brick your phone.
Sent from my GT-I9205 using XDA Free mobile app
slow302stang said:
i managed to figure out the phillz. all it did was change the recovery program to his and now its stock andriod recovery... . their has to be a way for me to odin the stock os system. I wish i could just get into the phone itd be so much easier. lol 50k people online someone help me!
Click to expand...
Click to collapse
Huh? What exactly did you do? If you flashed Philz correctly using TWRP then you should have his recovery on your phone.
I think he needs to report his post to get it moved to his section with people to help him with his exact model and the correct stickies to help him.
If he can't then someone may need to report it for him.
Either way here is some reading material I found after a quick search in your forum.
http://forum.xda-developers.com/showthread.php?t=1725839
Always make sure of what your are flashing, that its correct for your phone and always back up
its the peanut said:
You know that the file that you have to put in odin has to be a ridiculous amount of mb or gb then other things because i made that mistake 2 lol.
You have to extract it when using your pc and stuff and sometimes you get others files like ones that arent even like 100 mb or whatever that can look like a rom.
Give me a full list of evrything you exactly do when flashing and wich file and name and how big the file is and also your model number... The s3 ATT right?
Can someone verify for me that att has an own bootloader and stuff and you can only like odin flash their stock roms right?
You can always use phillz touch recovery and download a custom rom like cyanogenmod for your phone! Then you can acces it... If you dont brick your phone.
Sent from my GT-I9205 using XDA Free mobile app
Click to expand...
Click to collapse
I have a galaxy s3 atat. The rom i wastrying to install was hellfire. Right now i managed to get phills recovery back on but i never backed up anyfiles so it doesnt help. That i know of. I just started this yesterday lol
slow302stang said:
I have a galaxy s3 atat. The rom i wastrying to install was hellfire. Right now i managed to get phills recovery back on but i never backed up anyfiles so it doesnt help. That i know of. I just started this yesterday lol
Click to expand...
Click to collapse
So you got Philz touch running? If so, then you should be able to flash hellfire with it (assuming that you definitely have the right rom for your phone model).
ArkThompson said:
So you got Philz touch running? If so, then you should be able to flash hellfire with it (assuming that you definitely havie the right rom for your phone model).
Click to expand...
Click to collapse
It doesnt work. I kept getting errors when i tryed installing it .
slow302stang said:
It doesnt work. I kept getting errors when i tryed installing it .
Click to expand...
Click to collapse
Try redownloading the rom maybe an bad download.
When it doesnt work then your phone just cant take it and try something else man.
And also ask the developer from the hellfire rom if your phone is compatible with the rom (sometimes you need to download some sort of kernel or whatever it needs)
Sent from my GT-I9205 using XDA Free mobile app
Is this the first ROM you've tried to flash? What were you running before trying to flash hellfire?
To fix your situation should be fairly simple. 1.download a different ROM to an external SD card, I recommend slimkat because its pretty stable. They use a unified d2lte build for all d2 devices. Before you install the zip, wipe data/factory reset, manually format system, wipe cache partition and dalvik cache, install the ROM zip and gapps zip if required then reboot and profit.
samsgun357 said:
Is this the first ROM you've tried to flash? What were you running before trying to flash hellfire?
To fix your situation should be fairly simple. 1.download a different ROM to an external SD card, I recommend slimkat because its pretty stable. They use a unified d2lte build for all d2 devices. Before you install the zip, wipe data/factory reset, manually format system, wipe cache partition and dalvik cache, install the ROM zip and gapps zip if required then reboot and profit.
Click to expand...
Click to collapse
I was running the stock rom. I downloaded cynogenor whatever its called but i cant put it on the sd card. It says the device is not connected. If i pull the files out of the sd card itll work. But it wont let me put the whole zip file on the sd card. Any ideas?