hi,
I installed 2.3.6, I wanted to replace the 672.180.17.XT910.Retail.en.EU
after installation got bootloop xt910, and when I want to run recovery error crashes
I tested:
http://forum.xda-developers.com/showthread.php?t=1453660
vervactor said:
hi,
I installed 2.3.6, I wanted to replace the 672.180.17.XT910.Retail.en.EU
after installation got bootloop xt910, and when I want to run recovery error crashes
I tested:
http://forum.xda-developers.com/showthread.php?t=1453660
Click to expand...
Click to collapse
it only gonna repair when you flash a proper FASTBOOT File with RSD LITE..!
i got the same problem, i solved it by doing flashing with RSD LITE..!
your razr is gsm or cdma ??
here is the link download the right one..!
http://sbf.droid-developers.org/umts_spyder/list.php
if it helped press thanks..
best of luck.! :good::good:
razr is gsm...
which software to download?
Just to make things clear > You where on an Leak, when you tried to Fastboot back to 2.3.6 ?
vervactor said:
razr is gsm...
which software to download?
Click to expand...
Click to collapse
what was your previous one..
i mean when your razr was working fine..?
i am asking about the region, it was retail or branded..?
vikcie said:
what was your previous one..
i mean when your razr was working fine..?
i am asking about the region, it was retail or branded..?
Click to expand...
Click to collapse
I guess, he should use an Retail.en.EU, but NOT after an Leak.
He bricked his Device, in case that he wanna downgrade.
HSD-Pilot said:
Just to make things clear > You where on an Leak, when you tried to Fastboot back to 2.3.6 ?
Click to expand...
Click to collapse
there is no return to 2.3.6, so as to install 4.0.x?
vikcie said:
what was your previous one..
i mean when your razr was working fine..?
i am asking about the region, it was retail or branded..?
Click to expand...
Click to collapse
I download the correct version now that I had originally installed
651.167.21.XT910.NonEFIGSRetail.en.EU
No way back from ICS.!
Gesendet von meinem XT910 mit Tapatalk 2
HSD-Pilot said:
No way back from ICS.!
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
hey brother can you help me with this??
http://forum.xda-developers.com/showthread.php?t=1741893
You've tried to wipe data in Stock Recovery after this flash?
When this not work, than make an clean flash with RSD again.
Sent from my XT910 using Xparent ICS Tapatalk 2
HSD-Pilot said:
You've tried to wipe data in Stock Recovery after this flash?
When this not work, than make an clean flash with RSD again.
Sent from my XT910 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
yup
i made a clean flsh with RSD again..
still in bootloop..
i am running on asia retail GB 2.3.6
only chance is 4.0 for RSD?
how to run the recovery?
I tried again in RSD 2.3.6, see attachment
Related
Hey guys,
i've a question and i think this one is very important...
There are several ICS leaks out there and evereyone of them seems to be based on another ICS kernel version...
My question is:
After i've installed any of that leaks, will i be able to flash the hopefully soon arriving OFFICIAL 'Q2'-ICS (Retail) Upgrade?
i'll flash the leak posted by Spryte.
Sh4itan said:
Hey guys,
i've a question and i think this one is very important...
There are several ICS leaks out there and evereyone of them seems to be based on another ICS kernel version...
My question is:
After i've installed any of that leaks, will i be able to flash the hopefully soon arriving OFFICIAL 'Q2'-ICS (Retail) Upgrade?
i'll flash the leak posted by Spryte.
Click to expand...
Click to collapse
We will be able to flash the fastboot files over the leak. No problem.
"shaitan"???
Gesendet von meinem XT910 mit Tapatalk 2
dtrail1 said:
We will be able to flash the fastboot files over the leak. No problem.
"shaitan"???
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
I hope so
I'll give this leak a chance to impress me
jeah, 'shaitan'... problem?
PS: and you are sure it's possible to change to the official ics??
Do you have a link to the cheesecake app
Sent from my DROID RAZR using xda premium
spryte said:
If you uprade to "my" ICS leak and still have root, you can look for updates via cheesecake, which should bring you directly onto the upgrade path again (I don't have root any more, so I have to wait)
Click to expand...
Click to collapse
I didnt think cheesecake worked on ics.
Sent from my DROID RAZR using xda premium
My cellphone got stucked when I installed the Clockworkmod Touch 5.8.4.9 Black Edition. When I pressed the buttom to reboot the cellphone, he got stucked in a warning icon with a android robot in the right side. I dont know what to do. I'm completely noob and I too nervous because I could lost an expensive cellphone in 5 seconds. Please help me, I'm so ****ing nervous.
There's enough bricked razr with that nuts cwm atm.
You'll need to flash a stock rom to your razr.
Whats your razr version? .eu, asia, latam, verizon?...
Cheers
Sent from my XT910 using xda premium
pedrotorresfilho said:
There's enough bricked razr with that nuts cwm atm.
You'll need to flash a stock rom to your razr.
Whats your razr version? .eu, asia, latam, verizon?...
Cheers
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
Brazilian version.
http://forum.xda-developers.com/showthread.php?p=28327837
Flash this Fastboot with RSD and you will have an working Phone with ICS.
Gesendet von meinem XT910 mit Tapatalk 2
Hey guy
I wanna know is there any way to restore my CID from AP fastboot, without root permission?
My (GSM) device bricked after OTA, and only the o2 JB fastboot from RSD lite bring it back to life.
But my cid is deleted.. And i wanna restore it to boot up normally and able to use USB mass storage..
Any solution?
Regards,
If i remember right, you got an Latam Razr (AmericanMovil)?
You're currently running an EU Rom, so you can't restore your Cid. You have to wait for an Latam JB Version.
Gesendet von meinem XT890 mit Tapatalk 2
HSD-Pilot said:
If i remember right, you got an Latam Razr (AmericanMovil)?
You're currently running an EU Rom, so you can't restore your Cid. You have to wait for an Latam JB Version.
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
cool..
wait for rom or wait for method to root JB.. nice
Thanks for answer.
Hi,
I have been checking for JB update for Asia(India), However as we are not getting official update, so are there any way to update it to JB? What i want to know is that can i just take any JB sbf and flash it on Razr xt910 or need to do something else? Very confused now..and which SBF is more suitable for Asia(India) phones..Like i have seen people reporting problems with EU sbf like baseband problems etc..Anyone here from India especially who have updated it to JB and not facing problem then pl help.. Thanks,..
U can Flash EU ICS Through RSD Lite and then U can Update to JB through ota or manually update through Recovery.
Sent from my XT890 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1738769
Try this it would even help you to flash on Asian xt910.
Hit the thx button if i helped ya in anyways
If you like you can Install Safestrap and run Cm 10.1 as dual boot system on your phone
Installing Safestrap - Link
Official Cm 10.1 - Link
L7iharsha said:
U can Flash EU ICS Through RSD Lite and then U can Update to JB through ota or manually update through Recovery.
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
After this, will we be facing problem of baseband / WiFi / or any other thing? Just wanted to make sure.. thanks
Sent from my XT910 using Tapatalk 2
No Problem bro coz I have XT912 and XT910 I'm flashed EU JB On XT910 I'm not having any network issues 3G also working fine
Sent from my Golden'd Atrix HD MAXX using xda app-developers app
L7iharsha said:
No Problem bro coz I have XT912 and XT910 I'm flashed EU JB On XT910 I'm not having any network issues 3G also working fine
Sent from my Golden'd Atrix HD MAXX using xda app-developers app
Click to expand...
Click to collapse
Can you pl confirm if we have official sbf for EU( JB ) ? So that it would be safe to do it if something goes wrong..
Sent from my XT910 using Tapatalk 2
Bro its 100% official it won't brick ur phone unless If u flash Verizon rom on xt910
Sent from my XT890 using xda app-developers app
Sedariya11 said:
Can you pl confirm if we have official sbf for EU( JB ) ? So that it would be safe to do it if something goes wrong..
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
It will not brick ya phone at all if ya follow the instruction properly and yeah i am the witness because i was on Asian retail and flashed eu jellybean leak.
Edit : Ya may have stuck to ics forever if ya don't flash different region ota because there is no hope for Indian XT910
Hit the thx button if i helped ya in anyways
Off-Topic why u always use "ya"?? Is it ur common word?
Sent from my XT890 using xda app-developers app
Sedariya11 said:
After this, will we be facing problem of baseband / WiFi / or any other thing? Just wanted to make sure.. thanks
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
It won't affect your baseband or any other communication. Don't worry about that.
L7iharsha said:
Off-Topic why u always use "ya"?? Is it ur common word?
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
Lolz yeah i say ya because i do hip hop, r&b and reggie so you is not there in our swag (dictionary) . Holla at me if ya gotta what i mean
Hit the thx button if i helped ya in anyways
Sedariya11 said:
Hi,
I have been checking for JB update for Asia(India), However as we are not getting official update, so are there any way to update it to JB? What i want to know is that can i just take any JB sbf and flash it on Razr xt910 or need to do something else? Very confused now..and which SBF is more suitable for Asia(India) phones..Like i have seen people reporting problems with EU sbf like baseband problems etc..Anyone here from India especially who have updated it to JB and not facing problem then pl help.. Thanks,..
Click to expand...
Click to collapse
Been running the jb Vodafone EU update. Followed the guide, kept my root and all is well.
Made a few changes. My 3g signal was always full but the internet access used to be spotty. Just patched the radio from the EU retail leak and all is well.
So go ahead and flash the retail EU leak. Don't bother with the Vodafone one. I was impatient so I'm stuck with this with root access or flashing the EU retail sbf and losing my root.
DM me if you have any questions or need any help.
Cheers
Sent from my XT910 using xda app-developers app
djpeesh said:
Been running the jb Vodafone EU update. Followed the guide, kept my root and all is well.
Made a few changes. My 3g signal was always full but the internet access used to be spotty. Just patched the radio from the EU retail leak and all is well.
So go ahead and flash the retail EU leak. Don't bother with the Vodafone one. I was impatient so I'm stuck with this with root access or flashing the EU retail sbf and losing my root.
DM me if you have any questions or need any help.
Cheers
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
i'm in Razr ASIA too. If i flash with fastboot the baseband would be change to EU retail? can i flash baseband from stock ICS after flash to JB?
diktusit said:
i'm in Razr ASIA too. If i flash with fastboot the baseband would be change to EU retail? can i flash baseband from stock ICS after flash to JB?
Click to expand...
Click to collapse
i dont think so as u might brick ur razr by doing it..however i am using EU only and its working perfectly fine so no need to change the baseband.:good:
Sedariya11 said:
i dont think so as u might brick ur razr by doing it..however i am using EU only and its working perfectly fine so no need to change the baseband.:good:
Click to expand...
Click to collapse
Ya don't even need to change baseband . M using .EU karnel without any problem in Bangalore ( India ).
Thx
Hit the thx button if i helped ya in anyways
I keep hoping one day Asia.retail will just get OTA as a surprise. Do I really have to switch to EU? I really don't want to. I feel abandoned.
iolinux333 said:
I keep hoping one day Asia.retail will just get OTA as a surprise. Do I really have to switch to EU? I really don't want to. I feel abandoned.
Click to expand...
Click to collapse
Its been officially announced by Motorola that Indian Razr & Razr Maxx will remain:good: on ICS and there will be no JB update so the better option is to switch to EU JB. I have switched and have no regrets..
iolinux333 said:
I keep hoping one day Asia.retail will just get OTA as a surprise. Do I really have to switch to EU? I really don't want to. I feel abandoned.
Click to expand...
Click to collapse
We are abandoned..
Sent From Tapatalk 2
diktusit said:
i'm in Razr ASIA too. If i flash with fastboot the baseband would be change to EU retail? can i flash baseband from stock ICS after flash to JB?
Click to expand...
Click to collapse
You can flash ics baseband. PM me and I'll send you detailed instructions.
Sent from my XT910 using xda app-developers app
I used to have a SE Xperia X8 in the past.
When I started unlocking it I found out that in order to flash a ROM, you sould be rooted, same here with my xt910.
Although in order to flash a kernel you sould have first unlocked your bootloader. The kernel flashing was done with a PC program (.exe) called Flashtool. (You could also change the baseband version using flashtool, which I don't know what it is...)
So, how does it work with xt910?? I've red something about CID, which again, I don't even know what it is ( ), and nothing about bootloader or something.
I would really need some help here!
Thanks!
This device's bootloader hasn't been unlocked yet. And probably never will, if you are looking to flash Roms install safestrap or bootmenumanager, and then read the OPs that should do, you can check some vídeo tutorials at youtube also...
Sent from my XT910 using xda premium
Steven87 said:
This device's bootloader hasn't been unlocked yet. And probably never will, if you are looking to flash Roms install safestrap or bootmenumanager, and then read the OPs that should do, you can check some vídeo tutorials at youtube also...
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
And what about kernels? They are all flashed via recovery?? What a "kexec" is? A kernel, right?
Every kexec ROM brings their own kernel. Kexec bypasses the bootloader lock and loads the kernel con top of the stock one, the only kernel you can flash in recovery is jbx, bit you have to install a kexec ROM first... Check the tutorials con youtube, they are very good...
Sent from my XT910 using xda premium
maxnaxos said:
And what about kernels? They are all flashed via recovery?? What a "kexec" is? A kernel, right?
Click to expand...
Click to collapse
Check the dev section. There you can find my JBX-Keenwl. It currently works only with 4.2.2 roms. But I am working on 4.3 now.
Steven87 said:
Every kexec ROM brings their own kernel. Kexec bypasses the bootloader lock and loads the kernel con top of the stock one, the only kernel you can flash in recovery is jbx, bit you have to install a kexec ROM first... Check the tutorials con youtube, they are very good...
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
Thanks a lot!
Two last questions:
1) If I flash jbx, then can I normally run the stock 4.0.4 rom from ss? And if not, is there any way to get to my previous kernel?
2) What CID is all about??
Sent from my XT910 using XDA Premium HD app
http://forum.xda-developers.com/showthread.php?t=2325764
see he re for how to BMM (which you can flash kernels/basebands and more)
CID is a customer ID for keeping you to flash a firmware form other region
With BMM you can backup, erase and restore your CID
maxnaxos said:
Thanks a lot!
Two last questions:
1) If I flash jbx, then can I normally run the stock 4.0.4 rom from ss? And if not, is there any way to get to my previous kernel?
2) What CID is all about??
Sent from my XT910 using XDA Premium HD app
Click to expand...
Click to collapse
There is NO need to play with the CID anymore! But if you think you have to do it anyways, please keep multiple backups of your CID on save place (computer, USB stick...).
Without the backup you will be stuck with bmm/bp tools boot which busts your warranty for sure.
Gesendet von meinem XT910 mit Tapatalk 4
dtrail1 said:
Check the dev section. There you can find my JBX-Keenwl. It currently works only with 4.2.2 roms. But I am working on 4.3 now.
Click to expand...
Click to collapse
Looking forward to seeing a 4.3 build of your JBX.... was running 0.8.1 on Paranoidandroid rom 3.69 and it was awesome!!!!!!!!
$H0RTY 140 said:
Looking forward to seeing a 4.3 build of your JBX.... was running 0.8.1 on Paranoidandroid rom 3.69 and it was awesome!!!!!!!!
Click to expand...
Click to collapse
Thx. Check 8.2 until I can release 4. 3 kernel
Gesendet von meinem XT910 mit Tapatalk 4