how do i get it in emergency mode
i bricked it and it is stuck at the android sign
ok so i got it in emergency mode but now KDZ says PHONE WAS NOT FOUND
Foorperif said:
ok so i got it in emergency mode but now KDZ says PHONE WAS NOT FOUND
Click to expand...
Click to collapse
in kdz select emergency/cs emergency
instead of diag
when in emergency mode
now it says load CDMAPhoneData error
Foorperif said:
now it says load CDMAPhoneData error
Click to expand...
Click to collapse
no idea about it
go into emergency mode
power+volume button+back button
then in kdz select emergency mode instead of default diag
select .kdz file
follow this detailed guide for installation via kdz
http://lgp500-optimusone.blogspot.in/2011/10/how-to-install-firmware-using-kdz.html
this is the log file
Code:
[20:02:26:272] : =============================================
[20:02:26:272] : Log is started on 30.06.2012, at 20:02:26:272,
executable: C:\Users\user\Desktop\LG\KDZ_FW_UPD.exe (ProcID: 0x00000748),
compile time : Dec 8 2010 09:19:37
[20:02:26:272] : Version :
[20:02:26:275] : Get Usb Port
[20:02:26:325] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM4)
[20:02:26:325] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[20:02:26:325] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM4
[20:02:26:325] : Port = COM4
[20:02:26:337] : UNKNOWN : Req(12) -> Rsp(13)
[20:02:26:338] : UNKNOWN : Req(12) -> Rsp(13)
[20:02:26:339] : UNKNOWN : Req(12) -> Rsp(13)
[20:02:26:339] : >> DIAG_STATUS_F FAILED
[20:02:26:344] : >>Get Model Name [DIAG_VERNO_F]
[20:02:26:345] : BAD CONN MODE : Req(0) -> Rsp(3)
[20:02:26:346] : BAD CONN MODE : Req(0) -> Rsp(3)
[20:02:26:347] : BAD CONN MODE : Req(0) -> Rsp(3)
[20:02:26:348] : BAD CONN MODE : Req(0) -> Rsp(3)
[20:02:26:349] : BAD CONN MODE : Req(0) -> Rsp(3)
[20:02:26:350] : BAD CONN MODE : Req(0) -> Rsp(3)
[20:02:26:350] : FAIL (No Phone)
[20:02:26:350] : GetModelName() Operation Failed Check Diag CMD
[20:02:26:350] : EMERGENCY Booting Mode
[20:02:26:350] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[20:02:26:351] : BS/P504/7Dser\AppData\Local\Temp\DZCD4E
[20:02:26:351] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - P504
[20:02:26:362] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[20:02:26:362] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[20:02:26:363] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[20:02:26:363] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[20:02:26:374] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[20:02:26:374] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[20:02:26:374] : NV Write Fail : NV ITEM 9028(9028)
[20:02:26:474] : >> GET DLOAD COMM MODE
[20:02:26:475] : [GetCommMode] Communication mode : 2
[20:02:26:475] : Pre Nand Download
[20:02:26:475] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[20:02:26:475] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
[20:02:26:476] : [COM4] >>NandFlashInitWithFile(PARTITION TBL)
[20:02:26:476] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
[20:02:26:568] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_TO_SDRAM 3
[20:02:26:568] : [COM14] ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_AMSS 15
[20:02:26:568] : [COM4] >>NandFlashInitWithFile(AMSS MODEM HEADER)
[20:02:26:570] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT AMSS MODEM HEADER
[20:02:26:581] : [COM14] >>Dl_AsyncWrite()
[20:02:26:581] : >> AMSS FLASHING ...
[20:02:26:582] : ¸Þ½ÃÁö º¸³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[20:02:26:582] : Sending Pkt Seq : 0
[20:02:26:583] : Sending Pkt Seq : 1
[20:02:26:583] : Sending Pkt Seq : 2
[20:02:26:583] : Sending Pkt Seq : 3
[20:02:26:583] : Sending Pkt Seq : 4
[20:02:26:583] : Sending Pkt Seq : 5
[20:02:26:583] : Sending Pkt Seq : 6
[20:02:26:583] : Sending Pkt Seq : 7
[20:02:26:583] : Sending Pkt Seq : 8
[20:02:26:583] : Sending Pkt Seq : 9
[20:02:26:594] : Dl_AsyncWrite - ErrNo(45), Addr(0x00004800), NandErrNo(0x04)
[20:02:26:594] : [COM14] ERROR Dl_AsyncWrite() TYPE_LPARAM_UPGRADE_ERROR_WRITE_TO_FLASH
[20:02:26:594] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[20:02:26:594] : Close Port<<
[20:02:26:594] : TYPE_WPARAM_UPGRADE_ERROR
[20:02:26:594] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 4008
[20:02:26:624] : Log finished
Related
Hello, I think my android is dead! It happened when I tried to install a
custom recovery on it! during the process and it was resumed with a screen
Black wrote: fastboot mode started udc_start ()
I've tried reinstalling the original room for the new Updater KDZ, however
displays an error log to see:
[R&D Test Tools Log File]
13:08:00 : Launching SW update
13:08:00 : Unpacking KDZ
13:08:21 : KDZ file extraced
13:08:23 : Files were extracted.
13:08:23 : LGMobileDL Load.
13:08:23 : Port = -1
13:08:23 : Connecting to phone
13:08:33 : Check Phone mode = 1
13:08:33 : Phone type check.......
13:08:33 : LGMobileDL.DLL Loading....
13:08:33 : _SetAuthMark Fail
13:08:33 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
13:08:33 : _SetAuthMark Fail
13:08:33 : LoadCDMAPhoneData() Error
13:08:33 : _DetachDLL Call
13:08:33 : _DetachDLL Call End
13:08:33 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\DZ_LGP500hAT-00-V20a-724-XXX-JUL-08-2011+0.dz
13:08:33 : Param : moduleDir =
13:08:33 : Param : waitTime = 0
13:08:33 : Param : UsbHighSpeed = 1
13:08:33 : Param : PhoneMode = 1
13:08:33 : Param : BinVersion = V20A_00.03
13:08:33 : Param : AuthMark = 1
13:08:33 : Call fn_StartUpgrade
13:08:51 : Smart : wParam = 100, lParam = 502
13:08:51 : Step : Upgrade Error error code = 502
13:08:51 : ResetStartInfo() Call
13:08:51 : _DetachDLL Call
13:08:51 : _DetachDLL Call End
13:08:51 : FreeLibrary Call
13:08:51 : FreeLibrary Call End
13:08:51 : ResetStartInfo() Call End
13:08:51 : ===FINISHED===
13:09:01 : OnModelDllMsg(OnMsgFromModelDll3GQCT_PDA) delete m_pLGCyonUpdate
Click to expand...
Click to collapse
Could anyone help me? I would be very happy if he could buy another phone...
Try flashing a recovery using LGMDP.
u can unbrick it by using fastboot flashing method itself, i did the same thing 2 days ago
Ya better u come out frm command instead of flashing ...
Mahesh....Android Freek...
please xda members help me with this device...trying any solution found on internet but no results...
log from kdz updater:
Code:
[R&D Test Tools Log File]
15:15:52 : Start fn_StartUpgrade
15:15:52 : Extract kdz file
15:16:13 : kdz decrypt Success
15:16:19 : Extract file Success.
15:16:19 : LGMobileDL Load.
15:16:19 : Port = -1
15:16:19 : Connection check start.
15:16:29 : Check Phone mode = 1
15:16:36 : Phone type check.......
15:16:36 : LGMobileDL.DLL Loading....
15:16:37 : _SetAuthMark Ok : wAuthMark(31947)
15:16:37 : _DetachDLL Call
15:16:37 : _DetachDLL Call End
15:16:37 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LU300031.wdb
15:16:37 : Param : moduleDir =
15:16:37 : Param : waitTime = 0
15:16:37 : Param : UsbHighSpeed = 1
15:16:37 : Param : PhoneMode = 1
15:16:37 : Param : BinVersion = LU300031_00
15:16:37 : Param : AuthMark = 31947
15:16:37 : Call fn_StartUpgrade
15:16:53 : CDMA: wParam = 3, lParam = 0
15:16:53 : Step : C Drive Erase
15:16:53 : CDMA: wParam = 4, lParam = 0
15:16:53 : Step : DLOAD Change
15:17:13 : CDMA: wParam = 5, lParam = 0
15:17:13 : Step : Main Binary Download to SDRAM
15:17:19 : CDMA: wParam = 100, lParam = 77
15:17:19 : Step : Upgrade Error2 - Error Code : 77
15:17:19 : ResetStartInfo() Call
15:17:19 : _DetachDLL Call
15:17:19 : _DetachDLL Call End
15:17:19 : FreeLibrary Call
15:17:21 : FreeLibrary Call End
15:17:21 : ResetStartInfo() Call End
15:17:21 : Finish All test
15:17:25 : OnModelDllMsg(OnMsgFromModelDll-CDMA) delete m_pLGCyonUpdate
please help....
i can't go in emergency mode...only download mode(s/w) ..attached a image
Nobody can help me?
Sent from my LG-P350 using Tapatalk 2
common xda xperts,please help...
Sent from my LG-P350 using the XDA mobile application powered by Tapatalk
Flash it with kdz when having cyanogenmod on it to put the stock ics back and the phone is stuck on lg logo.
23:03:39 : Start fn_StartUpgrade
23:03:39 : Extract kdz file
23:03:59 : kdz decrypt Success
23:04:03 : Extract file Success.
23:04:03 : LGMobileDL Load.
23:04:03 : Port = -1
23:04:03 : Connection check start.
23:04:12 : Check Phone mode = 2
23:04:30 : Phone type check.......
23:04:31 : _DetachDLL Call
23:04:31 : _DetachDLL Call End
23:04:31 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP700AT-01-V10a-226-10-MAY-16-2012+0.dz
23:04:31 : Param : moduleDir =
23:04:31 : Param : waitTime = 31525000
23:04:31 : Param : UsbHighSpeed = 1
23:04:31 : Param : PhoneMode = 2
23:04:31 : Param : BinVersion = V10A_00
23:04:31 : Param : AuthMark = 0
23:04:31 : Call fn_StartUpgrade
23:04:31 : CDMA: wParam = 206, lParam = 0
23:04:31 : Model Dll Msg Not Found(206, 0)
the numbers go to the end and reboots the phone but it is stuck on lg logo.
ideas?
Thanks
SOLVED! just needed to do factory reset and wipe by pressing Volume+ volume- home and power at the same time
dr-love said:
SOLVED! just needed to do factory reset and wipe by pressing Volume+ volume- home and power at the same time
Click to expand...
Click to collapse
Well done!
Sent from my Lenovo K860i using xda premium
Hello!
I have installed Cyanogenmod 9 on my LG Optimus Sol E730. In this moment, my phone won’t start. When I press the power button, the display shows „Emergency Mode!”. Before "Emergency Mode" screen appeared (when Cyanogenmod worked fine), I have tried to go into Recovery Mode, but I was getting the blue screen and the phone restarted. In this momment the phone doesn’t allow me to go into Recovery Mode. I have tried to reinstall the original firmware with KDZ Firmware Update, but I get an error and the program closes.
KDZ log -
22:41:32 : Launching SW update
22:41:32 : Unpacking KDZ
22:41:43 : KDZ file extraced
22:41:56 : Files were extracted.
22:41:56 : LGMobileDL Load.
22:41:56 : Port = -1
22:41:56 : Connecting to phone
22:42:06 : Check Phone mode = 1
22:42:23 : Phone type check.......
22:42:28 : LGMobileDL.DLL Loading....
22:42:28 : _SetAuthMark Fail
22:42:28 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
22:42:28 : _SetAuthMark Fail
22:42:28 : LoadCDMAPhoneData() Error
22:42:28 : _DetachDLL Call
22:42:28 : _DetachDLL Call End
22:42:28 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGE730AT-00-V10j-VDF-XXX-JAN-15-2013+0-DZ.dz
22:42:28 : Param : moduleDir =
22:42:28 : Param : waitTime = 0
22:42:28 : Param : UsbHighSpeed = 1
22:42:28 : Param : PhoneMode = 1
22:42:28 : Param : BinVersion = V10J_00
22:42:28 : Param : AuthMark = 0
22:42:28 : Call fn_StartUpgrade
22:42:28 : Smart : wParam = 206, lParam = 0
How can I reinstall the software on this phone?
Can I use ODIN 3 v1.70 or other software?
Please help me with a tutorial or some information.
I mention that I have installed Windows 8 x64 on my pc.
Thank you, guys!
D802 Won't install stock rom with LG flash tool 2014! (No Recovery Mode & Bootloop!)
Hello,
I have a D802 LG G2 Android phone, and I've been flashing roms for almost a year now, I knew my way around LG Flash Tool 2014 until I lost my backup files on my USB. It didn't really matter much because I could find the right version for the flash tool from the imei of the device.
The last 2 rom's I've had were CM 14.1 (unofficial), and I had edited boot.prop to get google assistant using an app from play store.
I was quite fine with the rom until I had learned that CM was officially shut down and that they had moved into Lineage OS, where I decided to install Lineage OS. Everything went pretty fine, I fully wiped my phone, and and flashed Lineage OS for D802 which I downloaded from the official website, I also downloaded the gapps and flashed them, and everything booted up perfectly. Last thing I needed was root access, and there was the download page on the Lineage OS website as well. I flashed everything and went in to the SU app, and it prompted that it had SU binary update, I accepted and the phone went into recovery to flash the updated binary. After that I got stuck in a bootloop.
I tried to go back to recovery but no success. The only way I could repair this was LG flash tool 2014 and then go back to stock and re-install Lineage without the binary update. But LG flash tool will go up to 2% or 4% and then says phone disconnected...
Here is the log from the flash:
16:27:01 : Start Date : 2017-02-25 16:27:01
16:27:01 : ---------- CSE mode ---------
16:27:01 : ***** Check Tool Version *****
16:27:01 : Tool version :
16:27:01 : UpgradeDLL version :
16:27:01 : Current Dir : C:\Users\Lucky\Desktop\LG_Flash_Tool_2014\LG Flash Tool 2014
16:27:01 : LGE USB Driver Version :
16:27:01 : Android PDLV Version :
16:27:01 : Android NDLV Version :
16:27:01 : ******************************************
16:27:01 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
16:27:01 : *****CheckOS Start********
16:27:01 : Microsoft_Windows8_Home Edition_
16:27:01 : *****CheckPCSyncPrograms Start*****
16:27:02 : PCSyncPrograms Not Found - OK and ready to upgrade
16:27:02 : SetEmerModeAT()
16:27:03 : Verifying phone connection...
16:27:03 : dwWaitResetTime(40000 ms)
16:27:04 : _IsConnectedPhone Call
16:27:04 : _IsConnectedPhone(0)
16:27:04 : 0 - NotConnected.
16:27:04 : 1 - Normal connect success
16:27:04 : 2 - Emergency connect success
16:27:05 : _IsConnectedPhone Call
16:27:05 : _IsConnectedPhone(0)
16:27:05 : 0 - NotConnected.
16:27:05 : 1 - Normal connect success
16:27:05 : 2 - Emergency connect success
16:27:06 : _IsConnectedPhone Call
16:27:06 : _IsConnectedPhone(0)
16:27:06 : 0 - NotConnected.
16:27:06 : 1 - Normal connect success
16:27:06 : 2 - Emergency connect success
16:27:06 : The USB cable is not connected with the phone.
Connect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
16:27:11 : _IsConnectedPhone Call
16:27:11 : _IsConnectedPhone(0)
16:27:11 : 0 - NotConnected.
16:27:11 : 1 - Normal connect success
16:27:11 : 2 - Emergency connect success
16:27:11 : The USB cable is not connected with the phone.
Connect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
16:27:13 : _IsConnectedPhone Call
16:27:13 : _IsConnectedPhone(0)
16:27:13 : 0 - NotConnected.
16:27:13 : 1 - Normal connect success
16:27:13 : 2 - Emergency connect success
16:27:13 : The USB cable is not connected with the phone.
Connect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
16:27:15 : _IsConnectedPhone Call
16:27:15 : _IsConnectedPhone(0)
16:27:15 : 0 - NotConnected.
16:27:15 : 1 - Normal connect success
16:27:15 : 2 - Emergency connect success
16:27:15 : The USB cable is not connected with the phone.
Connect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
16:27:17 : _IsConnectedPhone Call
16:27:17 : _IsConnectedPhone(0)
16:27:17 : 0 - NotConnected.
16:27:17 : 1 - Normal connect success
16:27:17 : 2 - Emergency connect success
16:27:17 : The USB cable is not connected with the phone.
Connect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
16:27:18 : _IsConnectedPhone Call
16:27:18 : _IsConnectedPhone(0)
16:27:18 : 0 - NotConnected.
16:27:18 : 1 - Normal connect success
16:27:18 : 2 - Emergency connect success
16:27:18 : The USB cable is not connected with the phone.
Connect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
16:27:20 : _IsConnectedPhone Call
16:27:32 : _IsConnectedPhone(2)
16:27:32 : 0 - NotConnected.
16:27:32 : 1 - Normal connect success
16:27:32 : 2 - Emergency connect success
16:27:32 : Phone Mode(2)
16:27:32 : *****GetPhoneType Start*****
16:27:32 : Phone Type : CDMA
16:27:32 : *****Get ESN / IMEI / MEID Start*****
16:27:33 : Skip Backup and Restore - CSE mode.
16:27:33 : Skip Sequential upgrade info check - CSE mode.
16:27:33 : *****CheckPCSyncPrograms Start*****
16:27:34 : PCSyncPrograms Not Found - OK and ready to upgrade
16:27:35 : ****************CheckAndDownload********************
16:27:35 : Version : Germany D80220H_00
16:27:35 : !!*****OpenURL Start*****!!
16:27:35 : ******Extract Start C:\Users\Lucky\Desktop\Germany D80220H_00.kdz*****
16:27:35 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
16:27:35 : Check 2G-4G big size kdz file..
16:27:35 : Extract 2G-4G big size kdz file..
16:27:35 : NNNNN WDB FullPath(C:\Users\Lucky\Desktop\Germany D80220H_00.kdz)
16:27:35 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
16:27:35 : Extract End C:\Users\Lucky\Desktop\Germany D80220H_00.kdz
16:27:35 : 01 Skip delete kdz 1.1 file...
16:27:35 : ------------------Model.dll Information-------------------
16:27:35 : Filename : LGUP_8974.dll
16:27:35 : Version : 0.3.13.1
16:27:35 : File size : 1526272
16:27:35 : File date : 2017/02/25-16:27:35
16:27:35 : PC Created date: 2017/02/25-16:27:35
16:27:35 : ----------------------------------------------------------
16:27:36 : *****Check LGCM Programs Start*****
16:27:36 : LGCM Programs Not Found - OK and ready to upgrade
16:27:36 : m_pLGCyonUpdate status change.
16:27:40 : *****WorkModelDLL Start*****
16:27:41 : strPhoneBinaryPath(C:\Users\Lucky\Desktop\Germany D80220H_00.kdz)
16:27:41 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
16:27:41 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
16:27:41 : _DetachDLL Call
16:27:46 : _DetachDLL Call End
16:27:46 : Call fn_StartUpgrade
16:27:46 : Phone mode change -> CSE
16:27:46 : ********* CDMA Model.dll input Parameter *************
16:27:46 : MODEL_EVENT : 32769
16:27:46 : PhoneBinaryPath : C:\Users\Lucky\Desktop\Germany D80220H_00.kdz
16:27:46 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
16:27:46 : BootWaitTime : 49500
16:27:46 : UsbHighSpeed : FALSE
16:27:46 : PhoneMode : 4
16:27:46 : NewPhoneBinVersion : Germany D80220H_00
16:27:46 : ClearSI : FALSE
16:27:46 : AuthMark : 0
16:27:46 : ********* CDMA Model.dll input Parameter End*************
16:27:50 : wParam : 20, lParam = 540
16:27:50 : MODEL DLL Event : (20, 540)
16:27:51 : Model File Count = 540
16:27:51 : wParam : 100, lParam = 51
16:27:51 : MODEL DLL Event : (100, 51)
16:27:51 : Step : TYPE_WPARAM_UPGRADE_ERROR
16:27:51 : CleanModelDll() : Free Model.dll
16:27:51 : _DetachDLL Call
16:27:56 : _DetachDLL Call End
16:27:59 : Page_Error ºÎºÐÀÔ´Ï´Ù
16:27:59 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
16:28:08 : Call Retry Thread
16:28:08 : Verifying phone connection...
16:28:08 : Verifying phone connection...
16:28:08 : dwWaitResetTime(40000 ms)
16:28:12 : _IsConnectedPhone Call
16:28:32 : _IsConnectedPhone(2)
16:28:32 : 0 - NotConnected.
16:28:32 : 1 - Normal connect success
16:28:32 : 2 - Emergency connect success
16:28:32 : Phone Mode(2)
16:28:32 : *****WorkModelDLL Start*****
16:28:33 : _DetachDLL Call
16:28:38 : _DetachDLL Call End
16:28:38 : strPhoneBinaryPath(C:\Users\Lucky\Desktop\Germany D80220H_00.kdz)
16:28:38 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
16:28:38 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
16:28:38 : _DetachDLL Call
16:28:43 : _DetachDLL Call End
16:28:43 : Call fn_StartUpgrade
16:28:43 : Phone mode change -> CSE
16:28:43 : ********* CDMA Model.dll input Parameter *************
16:28:43 : MODEL_EVENT : 32769
16:28:43 : PhoneBinaryPath : C:\Users\Lucky\Desktop\Germany D80220H_00.kdz
16:28:43 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
16:28:43 : BootWaitTime : 74250
16:28:43 : UsbHighSpeed : FALSE
16:28:43 : PhoneMode : 4
16:28:43 : NewPhoneBinVersion : Germany D80220H_00
16:28:43 : ClearSI : FALSE
16:28:43 : AuthMark : 0
16:28:43 : ********* CDMA Model.dll input Parameter End*************
16:28:46 : wParam : 20, lParam = 540
16:28:46 : MODEL DLL Event : (20, 540)
16:28:47 : Model File Count = 540
16:28:47 : wParam : 100, lParam = 51
16:28:47 : MODEL DLL Event : (100, 51)
16:28:47 : Step : TYPE_WPARAM_UPGRADE_ERROR
16:28:47 : CleanModelDll() : Free Model.dll
16:28:47 : _DetachDLL Call
16:28:52 : _DetachDLL Call End
16:28:55 : Page_Error ºÎºÐÀÔ´Ï´Ù
16:28:55 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
16:29:05 : Call Retry Thread
16:29:05 : Verifying phone connection...
16:29:05 : Verifying phone connection...
16:29:05 : dwWaitResetTime(40000 ms)
16:29:09 : _IsConnectedPhone Call
16:29:29 : _IsConnectedPhone(2)
16:29:29 : 0 - NotConnected.
16:29:29 : 1 - Normal connect success
16:29:29 : 2 - Emergency connect success
16:29:29 : Phone Mode(2)
16:29:29 : *****WorkModelDLL Start*****
16:29:30 : _DetachDLL Call
16:29:35 : _DetachDLL Call End
16:29:35 : strPhoneBinaryPath(C:\Users\Lucky\Desktop\Germany D80220H_00.kdz)
16:29:35 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
16:29:35 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
16:29:35 : _DetachDLL Call
16:29:40 : _DetachDLL Call End
16:29:40 : Call fn_StartUpgrade
16:29:40 : Phone mode change -> CSE
16:29:40 : ********* CDMA Model.dll input Parameter *************
16:29:40 : MODEL_EVENT : 32769
16:29:40 : PhoneBinaryPath : C:\Users\Lucky\Desktop\Germany D80220H_00.kdz
16:29:40 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
16:29:40 : BootWaitTime : 111375
16:29:40 : UsbHighSpeed : FALSE
16:29:40 : PhoneMode : 4
16:29:40 : NewPhoneBinVersion : Germany D80220H_00
16:29:40 : ClearSI : FALSE
16:29:40 : AuthMark : 0
16:29:40 : ********* CDMA Model.dll input Parameter End*************
16:29:43 : wParam : 20, lParam = 540
16:29:43 : MODEL DLL Event : (20, 540)
16:29:45 : Model File Count = 540
16:29:45 : wParam : 100, lParam = 51
16:29:45 : MODEL DLL Event : (100, 51)
16:29:45 : Step : TYPE_WPARAM_UPGRADE_ERROR
16:29:45 : CleanModelDll() : Free Model.dll
16:29:45 : _DetachDLL Call
16:29:50 : _DetachDLL Call End
16:29:56 : Page_Error ºÎºÐÀÔ´Ï´Ù
16:29:56 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
16:30:12 : Call Retry Thread
16:30:12 : Verifying phone connection...
16:30:12 : Verifying phone connection...
16:30:12 : dwWaitResetTime(40000 ms)
16:30:16 : _IsConnectedPhone Call
16:30:36 : _IsConnectedPhone(2)
16:30:36 : 0 - NotConnected.
16:30:36 : 1 - Normal connect success
16:30:36 : 2 - Emergency connect success
16:30:36 : Phone Mode(2)
16:30:36 : *****WorkModelDLL Start*****
16:30:38 : _DetachDLL Call
16:30:43 : _DetachDLL Call End
16:30:43 : strPhoneBinaryPath(C:\Users\Lucky\Desktop\Germany D80220H_00.kdz)
16:30:43 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
16:30:43 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
16:30:43 : _DetachDLL Call
16:30:48 : _DetachDLL Call End
16:30:48 : Call fn_StartUpgrade
16:30:48 : Phone mode change -> CSE
16:30:48 : ********* CDMA Model.dll input Parameter *************
16:30:48 : MODEL_EVENT : 32769
16:30:48 : PhoneBinaryPath : C:\Users\Lucky\Desktop\Germany D80220H_00.kdz
16:30:48 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
16:30:48 : BootWaitTime : 167062
16:30:48 : UsbHighSpeed : FALSE
16:30:48 : PhoneMode : 4
16:30:48 : NewPhoneBinVersion : Germany D80220H_00
16:30:48 : ClearSI : FALSE
16:30:48 : AuthMark : 0
16:30:48 : ********* CDMA Model.dll input Parameter End*************
16:30:51 : wParam : 20, lParam = 540
16:30:51 : MODEL DLL Event : (20, 540)
16:30:52 : Model File Count = 540
16:30:52 : wParam : 100, lParam = 51
16:30:52 : MODEL DLL Event : (100, 51)
16:30:52 : Step : TYPE_WPARAM_UPGRADE_ERROR
16:30:52 : CleanModelDll() : Free Model.dll
16:30:52 : _DetachDLL Call
16:30:57 : _DetachDLL Call End
16:31:00 : Page_Error ºÎºÐÀÔ´Ï´Ù
16:31:00 : Page_DeepError()- 8
16:31:00 : Problem with communication between cell phone and PC
To restart from the beginning, disconnect and connect the USB cable and battery,
then power on your cell phone and try with [Options]-[Upgrade Recovery] in tool menu.
This will normally complete update.
16:31:00 : *********** End of Page_DeepError() *********
16:32:06 : =======Cancel button click : m_nStep(10)
16:32:09 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
16:32:09 : RemoveDirectory1 Error(32):C:\ProgramData\LGMOBILEAX\Phone
16:32:09 : _DetachDLL Call
16:32:14 : _DetachDLL Call End
16:32:14 : FreeLibrary Call
16:32:14 : FreeLibrary Call End
16:32:14 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
16:32:14 : RemoveDirectory1 Error(32):C:\ProgramData\LGMOBILEAX\Phone