[Q] Neo V freezes at Sony splash... is it bricked? - Sony Ericsson Xperia Neo, Pro

I installed a ROM with its kernel (concretely, THIS rom with the recommended kernel) using CWM, and when I reboot it gets stuck at Sony splash... It's been like that for almost two hours.
So the question is... is it bricked? (I think that's a stupid question, it sure is...) Can this be repaired? Or I have to ask Sony for help (if possible)?

if you can get into cwm ..... try to reflash the rom....follow the steps given by the dev...wipe delvic/data etc..
if it does not work or if you cannot get into CWM reflash with night-elf kernel...
u r phone is not bricked :good::victory:

Log in Flashtool shows me that...
04/058/2012 18:58:24 - INFO - <- This level is successfully initialized
04/058/2012 18:58:24 - INFO - Flashtool Version 0.6.8.0 built on 2012-02-26 19:26:25
04/058/2012 18:58:24 - INFO - You can drag and drop ftf files here to start flashing them
04/058/2012 18:58:35 - INFO - Device connected in fastboot mode
04/059/2012 18:59:05 - INFO - Launching Fastboot Toolbox 1.0 by DooMLoRD
04/059/2012 18:59:06 - INFO - Device Status: FASTBOOT mode
04/059/2012 18:59:25 - INFO - Selected kernel (boot.img or kernel.sin): C:\Users\Arnold\Downloads\boot_ics_cm9-127.img
04/059/2012 18:59:25 - INFO - Flashing selected kernel
04/059/2012 18:59:26 - INFO - FASTBOOT Output:
sending 'boot' (5114 KB)...
FAILED (remote: The Device must be rooted first)
finished. total time: 0.001s
04/059/2012 18:59:26 - INFO - Please check the log before rebooting into system
Click to expand...
Click to collapse

do u have ur bootloader unlocked...???if not unlock it first...

Well, I guess it actually was unlocked... if not, how do I check it without entering the system or CWM?

if it is unlocked u will be able to flash it with other kernels
do you have latest version of flash tools??
try to download it and try again......if u have unlocked bootloader....it should work
if nothing happens use SEUS to restore

Arno-kun said:
I installed a ROM with its kernel (concretely, THIS rom with the recommended kernel) using CWM, and when I reboot it gets stuck at Sony splash... It's been like that for almost two hours.
So the question is... is it bricked? (I think that's a stupid question, it sure is...) Can this be repaired? Or I have to ask Sony for help (if possible)?
Click to expand...
Click to collapse
Firstly the good news is ur phone is not at all bricked ..i think u somehow installed the wrong kernel or something ..thats y the problem ..i had the same too about 3 days back ..u need to got back to the stock Rom ..and everything will be fine ..i think you knw it but i am telling u again : U need unlocked boot loader to flash custom ROMS
Now lets begin installing ur stock ROM
If u unlocked ur bootlaoder using the official method go here: http://forum.xda-developers.com/showthread.php?t=1134335&page=2 and relock it but DRM keys wont be back ..but u r bootlaoder will be locked again
1) Here : download the stock ROM http://talk.sonymobile.com/thread/35239?tstart=0 and install it through flashtool or go here http://forum.xda-developers.com/showthread.php?t=1678690 to download stock ROM
2) Follow the instructions in this thread : http://forum.xda-developers.com/showpost.php?p=26798415&postcount=141
3) Now u r on stock ROM with stock kernel ..root ur phone again using doomlords method given in the link above.
4) install CWM
5) Unlock ur boot loader again (u cannot unlock it using the official way unless u have the boot loader key that sony gave u when unlocking the boot loader )

samneov said:
if it is unlocked u will be able to flash it with other kernels
do you have latest version of flash tools??
try to download it and try again......if u have unlocked bootloader....it should work
if nothing happens use SEUS to restore
Click to expand...
Click to collapse
You know, using SEUS fixed my phone. Checked bootloader, and it's UNLOCKED. Thanks a lot to everyone! Thought I already lost my phone... Again, thank you all!

Related

Need help fixing my x10

I bought an x10 from a friend today and now I was trying to unlock the bootloader using this link: http://forum.xda-developers.com/showthread.php?t=1254087 however after the batch file finished it got stuck on the SE logo. After waiting a while I decided to just go back to 2.1.
I downloaded X10a_1.0_2_1_A_0_435 and tried to use flashtool to flash it but here is the log:
30/011/2011 18:11:51 - INFO - Searching Xperia....
30/011/2011 18:11:51 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&10EF021E&0&6
30/011/2011 18:11:51 - INFO - Start Flashing
30/011/2011 18:11:51 - INFO - VER="r8A033";DATE="20100928";TIME="12:04:00";
30/014/2011 18:14:02 - INFO - Flashing loader
30/014/2011 18:14:02 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
Any ideas how I can revive my phone? I have the PC companion but when I go to phone update -> repair phone, it keeps giving an installation error.
Edit: I forgot to add that I can still get into xrecovery.
were you at 2.3 when you tried to unlock the bootloader??
Yeah, my friend had some sony ericisson 2.3.3 custom rom on. (Wolf something?)
you were supposed to switch back to 2.1 before attempting to unlock the bootloader.
That thread says that it can be unlocked from any rom.
However I don't know what went wrong.
oh sorry about that you needed to downgrade your kernel. did you check if your phone was eligible with the tool provided in the thread. if it says your phone is able to goback to the flashtool and downgrade your kernel and retry unlocking your bootloader. dont do it though if your phone is not elible for the unlocked bootloader.
Yeah I ran the tool and it said my phone was SEMC simlocked or something similar. So I first downgraded, ran the batch to unlock then I got stuck at the SE logo. Been trying to get my phone to boot (to any rom right now then I'll try to unlock the bootloader again).
Any ideas?
did you flash doomlords kernel?? and from what i remember there were 2 applications that came with the file provided. if one doesnt use the other one.(if i remember correctly)
fcb1 said:
did you flash doomlords kernel??
Click to expand...
Click to collapse
I didn't get that far. All I did was flash the kernel downgrade, then ran the batch file. After it was successful I noticed my phone was stuck on the sony ericsson logo so I didn't continue with the rest of the instructions.
ok then just flash doomlords kernel. if you dont see the white sony ericcson letters after flashing doolords krnel, then you should be in the clear
fcb1 said:
ok then just flash doomlords kernel. if you dont see the white sony ericcson letters after flashing doolords krnel, then you should be in the clear
Click to expand...
Click to collapse
It won't flash the kernel. Here's the log:
30/024/2011 19:24:48 - INFO - Searching Xperia....
30/024/2011 19:24:48 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&10EF021E&0&6
30/024/2011 19:24:48 - INFO - Start Flashing
30/024/2011 19:24:48 - INFO - VER="r8A033";DATE="20100928";TIME="12:04:00";
30/026/2011 19:26:59 - INFO - Flashing loader
30/036/2011 19:36:58 - ERROR - Error flashing. Aborted
30/036/2011 19:36:58 - INFO - Now unplug the device and power it on
30/036/2011 19:36:58 - INFO - Then go to application settings
30/036/2011 19:36:58 - INFO - turn on Unknown Sources and Debugging
Click to expand...
Click to collapse
Notice that there's about a 10 minute difference between "Flashing loader" And the ERROR.
Hi,
Attempt to restore your bootloader via this tool and attempt your unlock again.
NOTE: Make sure you have the stock Sony Ericsson kernel installed.
Regards,
Mayazcherquoi.
Mayazcherquoi said:
Hi,
Attempt to restore your bootloader via this tool and attempt your unlock again.
NOTE: Make sure you have the stock Sony Ericsson kernel installed.
Regards,
Mayazcherquoi.
Click to expand...
Click to collapse
Ah crap..what if I had the free xperia kernel on? I just did a restore with that on and I can't flash the downgrade kernel..
Btw, I was able to flash doomlords kernel by trying it on another computer. But I think I messed up somewhere so I wanted to start over. And I restored w/out flashing back the stock kernel.
I just downloaded the kernel+baseband package from here and see if I can flash it via flashtool http://forum.xda-developers.com/showthread.php?t=1192152
Edit: ok, that was a close call. Now lets try all this again
Edit2: Okay bootloader unlocked. Flashed the free xperia custom kernel however when I get into CWM-based recovery I get the following error: "Can't mount /sdcard/" whenever I select choose zip from sd card. I was getting this before but I that thought that may be because I didn't flash the bootloader correctly but now I don't know what's causing it.

How to flash ICS(noob guide)

1. Download FTF needed http://www.mediafire.com/?o4v5ttaqsjhv3aq
2. Download Flashtool http://www.4shared.com/file/Ot3fyDJf/flashtool-0670-windows.html
3.install flashtool , install the drivers inside the flashtool
4. put the FTF you downloaded in the firmware folder where the flashtool is installed
5. Enable usb debuggin and switch off your phone
6.click on the FLASH icon on flashtool window,choose flashmode
7. if you want to keep your apps and data, uncheck wipe cache and data,its better if you check it but you will lose your data
8.follow the onscreen instructions , it will tell you when and how to connect your phone
9. you will get error at 99%, but your phone will start in ICS...
10. Enjoy
i am not responsible if you do it wrong
new links :1.http://www.mediafire.com/?7ik510cq7cy2p62
2.http://www.mediafire.com/?9dera4tes44pa7d
if you feel it was worth reading hit the thanks button
darky22 said:
1. Download FTF needed http://www.mediafire.com/?o4v5ttaqsjhv3aq
2. Download Flashtool
http://www.4shared.com/file/Ot3fyDJf/flashtool-0670-windows.html
3.install flashtool , install the drivers inside the flashtool
4. put the FTF you downloaded in the firmware folder where the flashtool is installed
5. Enable usb debuggin and switch off your phone
6.click on the FLASH icon on flashtool window,choose flashmode
7. if you want to keep your apps and data, uncheck wipe cache and data,its better if you check it but you will lose your data
8.follow the onscreen instructions , it will tell you when and how to connect your phone
9. you will get error at 99%, but your phone will start in ICS...
10. Enjoy
new links :1.http://www.mediafire.com/?7ik510cq7cy2p62
2.http://www.mediafire.com/?9dera4tes44pa7d
if you feel it was worth reading hit the thanks button
Click to expand...
Click to collapse
Uncheck wipe data is enough to preservere data. Wipe cache should be rather enabled.
voyteckst said:
Uncheck wipe data is enough to preservere data. Wipe cache should be rather enabled.
Click to expand...
Click to collapse
ok i should have mentioned that
I have unlocked bootloader with nightelf kernel + CWM. Do I need stock kernel to flash this ROM? Is it rooted?
sasa3342 said:
I have unlocked bootloader with nightelf kernel + CWM. Do I need stock kernel to flash this ROM? Is it rooted?
Click to expand...
Click to collapse
u can have other kernel like of nightelf and this fw is not prerooted,but if you have cwm u can use this to root
http://forum.xda-developers.com/showpost.php?p=24834920&postcount=26
no my phone will not restart in ICS i got an error, sony and then error, and i cant flash the kernel in fastboot mode :S
i have unlocked bl
Pandemic said:
no my phone will not restart in ICS i got an error, sony and then error, and i cant flash the kernel in fastboot mode :S
i have unlocked bl
Click to expand...
Click to collapse
In my case
I flashed, didn't boot, tried many times, but still didn't boot
So i flashed night elf kernel through fastboot, entered recovery wiped everything
Then it booted normally!
Hope it helped
Aarush said:
In my case
I flashed, didn't boot, tried many times, but still didn't boot
So i flashed night elf kernel through fastboot, entered recovery wiped everything
Then it booted normally!
Hope it helped
Click to expand...
Click to collapse
yeah but when i rename the kernel to boot.img and then the comment then says it error, what did you did ?
explain bro
Edit: never mind, i stay on supercharged 62 and relock my bl again.
Hi all, i was on stock 4.0.2.A.0.62, flashed just as said in first post, unchecked wipe data and everything is just awsome, works like a charm for now.
I can't thank you enough for your instructions guys!
Just 2 questions:
1. How to take screenshot on ICS
2. There is no Sony Contact widget?
TNX a lot!
Hi all, i was on stock 4.0.2.A.0.62, flashed just as said in first post, unchecked wipe data and everything is just awsome, works like a charm for now.
I can't thank you enough for your instructions guys!
Just 2 questions:
1. How to take screenshot on ICS
2. There is no Sony Contact widget?
TNX a lot!
Click to expand...
Click to collapse
u can press the vol Down and power button a few seconds to take screenshot
Find me at Gtalk
Sent from my fast Neo V
Sorry for my bad English...
ICS update via PC Companion on unlocked bootloader & custom kernel
I have unlocked bootloader with custom kernel (nightelf) on my phone. Can I update neo V via PC Companion without consequences?
sasa3342 said:
I have unlocked bootloader with custom kernel (nightelf) on my phone. Can I update neo V via PC Companion without consequences?
Click to expand...
Click to collapse
Depends on the way you unlocked boot loader,so what method you used?
Anyway why don't u flash with Flashtool ?
I don't know... Just asking.
Official method, via SE unlocking bootloader site.
sasa3342 said:
I don't know... Just asking.
Official method, via SE unlocking bootloader site.
Click to expand...
Click to collapse
Then you cannot use pc companion till you relock boot loader
How to re-lock boot loader
http://forum.xda-developers.com/showthread.php?t=1134335
I followed these instructions:
1. Download FTF needed http://www.mediafire.com/?o4v5ttaqsjhv3aq
2. Download Flashtool http://www.4shared.com/file/Ot3fyDJf...0-windows.html
3.install flashtool , install the drivers inside the flashtool
4. put the FTF you downloaded in the firmware folder where the flashtool is installed
5. Enable usb debuggin and switch off your phone
6.click on the FLASH icon on flashtool window,choose flashmode
7. if you want to keep your apps and data, uncheck wipe cache and data,its better if you check it but you will lose your data
8.follow the onscreen instructions , it will tell you when and how to connect your phone
9. you will get error at 99%, but your phone will start in ICS...
10. Enjoy
And i got this:
15/008/2012 05:08:56 - INFO - Flashing adsp.sin
15/008/2012 05:08:59 - INFO - Flashing amss_fs_haida.sin
15/008/2012 05:08:59 - INFO - Flashing kernel.sin
15/009/2012 05:09:02 - INFO - Flashing fota1.sin
15/009/2012 05:09:03 - INFO - Flashing fota0.sin
15/009/2012 05:09:04 - INFO - Flashing apps_log.sin
15/009/2012 05:09:04 - INFO - Flashing amss.sin
15/009/2012 05:09:14 - INFO - Flashing cache.sin
15/009/2012 05:09:14 - INFO - Flashing system.sin
15/011/2012 05:11:34 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Final data verification failed";
15/011/2012 05:11:34 - ERROR - Error flashing. Aborted
Solution?
sasa3342 said:
I followed these instructions:
1. Download FTF needed http://www.mediafire.com/?o4v5ttaqsjhv3aq
2. Download Flashtool http://www.4shared.com/file/Ot3fyDJf...0-windows.html
3.install flashtool , install the drivers inside the flashtool
4. put the FTF you downloaded in the firmware folder where the flashtool is installed
5. Enable usb debuggin and switch off your phone
6.click on the FLASH icon on flashtool window,choose flashmode
7. if you want to keep your apps and data, uncheck wipe cache and data,its better if you check it but you will lose your data
8.follow the onscreen instructions , it will tell you when and how to connect your phone
9. you will get error at 99%, but your phone will start in ICS...
10. Enjoy
And i got this:
15/008/2012 05:08:56 - INFO - Flashing adsp.sin
15/008/2012 05:08:59 - INFO - Flashing amss_fs_haida.sin
15/008/2012 05:08:59 - INFO - Flashing kernel.sin
15/009/2012 05:09:02 - INFO - Flashing fota1.sin
15/009/2012 05:09:03 - INFO - Flashing fota0.sin
15/009/2012 05:09:04 - INFO - Flashing apps_log.sin
15/009/2012 05:09:04 - INFO - Flashing amss.sin
15/009/2012 05:09:14 - INFO - Flashing cache.sin
15/009/2012 05:09:14 - INFO - Flashing system.sin
15/011/2012 05:11:34 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Final data verification failed";
15/011/2012 05:11:34 - ERROR - Error flashing. Aborted
Solution?
Click to expand...
Click to collapse
Did u try to boot?
Find me at Gtalk
Sent from my fast Neo V
Sorry for my bad English...
wilsonchuchu said:
Did u try to boot?
Find me at Gtalk
Sent from my fast Neo V
Sorry for my bad English...
Click to expand...
Click to collapse
yeah, it boots in ics , mentioned in the thread
darky22 said:
yeah, it boots in ics , mentioned in the thread
Click to expand...
Click to collapse
Yes, i tried to boot... and stuck in boot loop
sasa3342 said:
Yes, i tried to boot... and stuck in boot loop
Click to expand...
Click to collapse
Try to flash night-elf kernel then go tp cwm to wipe data
Find me at Gtalk
Sent from my fast Neo V
Sorry for my bad English...
sasa3342 said:
Yes, i tried to boot... and stuck in boot loop
Click to expand...
Click to collapse
Night Elf's RC2 kernel

[Q] Rooting/Flashing Advice

Hi,
Just looking for some advice really, I'm looking to root/flash my girlfriends's mini pro (SK17i), it's currently running GB (4.0.2.A.0.62) which as I understand cannot be rooted from that particular version? The phone was bought 2nd hand and the bootloader is already unlocked.
Questions I have are:
1. From reading the forums, I was going to go with stock ICS rom with rage kernel, as I'm looking for stability/battery life, or are there better combinations of custom ROM/kernel out there, for this purpose?
2. If I do stay with stock ICS is it necessary that I downgrade before rooting then flashing? Or can I flash directly to ICS?
I should be fine with the whole process of rooting flashing the phone, but would greatly appreciate the advice!!
Again Many Thanks
1. Since you have a unlocked bootloader it's possible to root .62 firmware by just flashing a prerooted kernel like the rage kernel for gb.
2.I've been using rage ics kernel with stock Sony ics Rom, it is very much stable and battery standby is really good.
3. First you flash the ics ftf using flashtool and boot the device. then power down the device and enter into flashmode and flash rage kernel for ics. You don't have to root your phone separately, once you flash the rage kernel for ics you're phone will be automatically rooted and busybox will be installed.
You don't have to downgrade at all! You have a unlocked bootloader man! Just flash the rage kernel and your phone will be rooted!
Just make sure you flash the correct version of rage kernel. 3.2 for ics. 3.0 for gingerbread.
hit thanks if I've helped!
sent from my smultron
Thanks for the swift reply!
So to clarify, am I right in thinking flash the ICS ROM first then once done reboot and flash the Kernel next?
I dont need to flash the kernel on GB first?
Also any opinions on Panic Kernel, is that also prerooted?
Cheers
nedsnurb said:
Thanks for the swift reply!
So to clarify, am I right in thinking flash the ICS ROM first then once done reboot and flash the Kernel next?
I dont need to flash the kernel on GB first?
Also any opinions on Panic Kernel, is that also prerooted?
Cheers
Click to expand...
Click to collapse
1. That`s the point. Normally, to install a custom rom via clockworkmod you flash the kernel first and after that you install the rom.
But now you don't install a custom rom, you flash the ftf and this ftf will overwrite the kernel (kernel is a boot.img). So after you have flashed the ftf you can just plug phone off, plug in in fastboot mode again and flash the custom kernel. Then just reboot (you can reboot before flashing kernel if you like, but that wouldn't change anything)
2. No you don't need, just flash the kernel for the rom you like.
3. Yes panic should be prerooted, too
Ya you are right! No need to flash gb kernel .
hit thanks if I've helped!
sent from my smultron
---------- Post added at 05:47 PM ---------- Previous post was at 05:44 PM ----------
mihahn said:
1. That`s the point. Normally, to install a custom rom via clockworkmod you flash the kernel first and after that you install the rom.
But now you don't install a custom rom, you flash the ftf and this ftf will overwrite the kernel (kernel is a boot.img). So after you have flashed the ftf you can just plug phone off, plug in in fastboot mode again and flash the custom kernel. Then just reboot (you can reboot before flashing kernel if you like, but that wouldn't change anything)
2. No you don't need, just flash the kernel for the rom you like.
3. Yes panic should be prerooted, too
Click to expand...
Click to collapse
Ya it wouldn't change anything but to make sure that the ftf is been flashed properly and the Rom boots. Just to go step by step.
hit thanks if I've helped!
sent from my smultron
Tbh if you're looking for good stabilty and battery life GB is still the go to....Rage kernel is DEfinitely not the best kernel for battery life
Panic is prerooted, its not harsh on battery life, but it has a few minor bugs, usb only connects in media transfer mode and the cmw 6 it has has reported some issues when doing nand backups...The best kernbel for stability and battery in my opinion (i tested them all) is Mesa kernel, rage and panic are more for performance and performance usually means less battery life
Okay guys, flashed stock ICS ROM fine!
But now trying to flash MESA kernel using Fastboot Toolbox within Flashtool and I'm getting the error that my device isn't rooted?
Tried with a few other kernels and the same problem? I was under the impression flashing the kernel would also root the device?
Here is the Flashtool log
09/016/2012 19:16:18 - INFO - <- This level is successfully initialized
09/016/2012 19:16:18 - INFO - Flashtool Version 0.9.8.0 built on 2012-10-01 19:35:32
09/016/2012 19:16:18 - INFO - You can drag and drop ftf files here to start flashing them
09/016/2012 19:16:28 - INFO - Device disconnected
09/016/2012 19:16:28 - INFO - Launching Fastboot Toolbox 1.0 by DooMLoRD
09/016/2012 19:16:30 - INFO - Device Status: NOT FOUND
09/016/2012 19:16:41 - INFO - Device connected in fastboot mode
09/017/2012 19:17:38 - ERROR - no kernel (boot.img or kernel.sin) selected!
09/018/2012 19:18:03 - INFO - Finished Fastboot Toolbox
09/019/2012 19:19:32 - INFO - Launching Fastboot Toolbox 1.0 by DooMLoRD
09/019/2012 19:19:32 - INFO - Device Status: FASTBOOT mode
09/019/2012 19:19:48 - INFO - Selected kernel (boot.img or kernel.sin): C:\Users\Johnny\Downloads\minipro_mesa_v1.8.img
09/019/2012 19:19:48 - INFO - Flashing selected kernel
09/019/2012 19:19:49 - INFO - sending 'boot' (7126 KB)...
09/019/2012 19:19:49 - INFO - FAILED (remote: The Device must be rooted first)
09/019/2012 19:19:49 - INFO - finished. total time: 0.003s
09/019/2012 19:19:49 - INFO - FASTBOOT Output:
sending 'boot' (7126 KB)...
FAILED (remote: The Device must be rooted first)
finished. total time: 0.003s
Click to expand...
Click to collapse
Help!
nedsnurb said:
Okay guys, flashed stock ICS ROM fine!
But now trying to flash MESA kernel using Fastboot Toolbox within Flashtool and I'm getting the error that my device isn't rooted?
Tried with a few other kernels and the same problem? I was under the impression flashing the kernel would also root the device?
Here is the Flashtool log
Help!
Click to expand...
Click to collapse
Hmm the log looks like your phone's bootloader isn't unlocked yet. Please power phone on and type *#*#7378423#*#* and go to service info -> configuration -> rooting status and tell us what is written there. Cause it must work
Yeah it has bootloader unlock allowed: yes
Which I'm guessing it means it isn't unlocked at present?
Sorry was being stupid I thought it was already unlocked! I can just follow the tutorial sticky to unlock right? Then give it another go?
nedsnurb said:
Yeah it has bootloader unlock allowed: yes
Which I'm guessing it means it isn't unlocked at present?
Sorry was being stupid I thought it was already unlocked! I can just follow the tutorial sticky to unlock right? Then give it another go?
Click to expand...
Click to collapse
Okay you must know what you want, two options:
1. Just root phone, and uninstall the crap. This maybe won't void warranty, cause if you unroot you can bring it to service again.
2. Unlock bootloader:
1. You unlock via official method -> you void warranty but you can install a custom kernel for better performance or other custom roms (for example cyanogenmod)
2. You unlock via testpoint method, which can be relocked and maybe sony won't notice, but that's more dangerous and I wouldn't do it.
These are the methods you have, just choose one
Btw for rooting you needn't unlock bootloader, choose your current software version in my rooting guide and follow the steps to root
nedsnurb said:
Yeah it has bootloader unlock allowed: yes
Which I'm guessing it means it isn't unlocked at present?
Sorry was being stupid I thought it was already unlocked! I can just follow the tutorial sticky to unlock right? Then give it another go?
Click to expand...
Click to collapse
Ya it looks like you haven't unlocked your bootloader yet .
It's better to unlock via the official method. You'll lose DRM keys (google it) and remember all your phone data (except memory card data) will be erased To be on the safer side just remove the memory card prior to unlocking. Sync up your contacts to your google account or take a backup of your contacts in your memory card.
YOU'LL VOID YOUR WARRANTY. YOU CANNOT USE SEUS TO UPDATE YOUR PHONE SOFTWARE instead you have to use flashtool which is not a concern at all and after unlocking please do not accept any over the air (ota) Sony software updates, IT WILL BRICK YOUR DEVICE .
Just for your information there is also a guide to unbrick the device which is bricked due to fota update but you would not want to brick it in the first place would you? .
Look at Sony's official bootloader unlocking page for further instructions and keep your IMEI handy it'll ask for it (dial *#06# for your IMEI or look at the phone's packaging).
Happy unlocking!
hit thanks if I've helped!
sent from my smultron

unable to flash kernels, firmware, phone travels back in time

Hello there xda comunity,
I am facing a big problem with my xperia p.
Running stock ROM, stock firmware 6.2.A.1.100, rooted my phone by doomlord method and ulocked bootloader not via flashtool, but via other flashtool provided in unlock guidance on official sony website.
everything was working fine until I installed One Power Guard and it totally messed up my phone. Apps started to force close randomly (contacts,album,messages,android.acore etc.) showing annoying popups every single second making me unable even to answer a phone call.
and here comes to problem. I was trying to restore to factory settings, but after a reboot, phone seems to recover into some point without any reason or my permission and everything is as it was before restart. Even if I uninstall some app or take a photo and I reboot, the app is back and photo nowhere.
I was trying to flash new kernel via flashtool, but it says TOO MANY BAD BLOCKS and end with a failure, so it seems like that particular partition is damaged somehow and I cant get over it. I managed to mount my internal storage, so I was able to see it as mass storage on my desktop pc and tried to format and repair bad sectors. Test outcome said, there is no problem. I was very surprised when I reboted phone, all data was still there, so no format really happened.
when I try to flash new firmware, everythings go ok until it comes to the point READING DEVICE INFORMATION. It stucks there for eternity.
I have installed all drivera provided with flashtool and I am able to smoothly go to fast boot mode or flashmode but it is all I can really do, because as I said I cant flash kernel, nor firmware.
So what am I supposed to do? Any help?
hi
so if u can go fastboot u can flash kernel...bcuz system is not loaded and phone partially off
u unlocked bl so pcc never again till u relock it lil advice loll
same thing for flashmode so or else u flash an ftf wich gonna clean the phone or u flash a custom kernel with cwm from there u wipe cache partition, dalvik cache , data factory reset then u go to mount ...u format system and caches u go back flashtool and flash an clean ftf
when u there at ftf flash untick TA partition on right side and final verification
take another custom kernel maybe u took one corrupted it could be te reason of that
sent with my perfexperia P using tapatalktak 2
Alx31TLse said:
hi
so if u can go fastboot u can flash kernel...bcuz system is not loaded and phone partially off
u unlocked bl so pcc never again till u relock it lil advice loll
same thing for flashmode so or else u flash an ftf wich gonna clean the phone or u flash a custom kernel with cwm from there u wipe cache partition, dalvik cache , data factory reset then u go to mount ...u format system and caches u go back flashtool and flash an clean ftf
when u there at ftf flash untick TA partition on right side and final verification
take another custom kernel maybe u took one corrupted it could be te reason of that
sent with my perfexperia P using tapatalktak 2
Click to expand...
Click to collapse
not really
when I try to relock my bootloader, or to flash new firmware, it always looks like this
15/048/2013 19:48:42 - INFO - Selected LT22i(P) / xperia.cz / relock_bootloader
15/048/2013 19:48:42 - INFO - Preparing files for flashing
15/048/2013 19:48:42 - INFO - Please connect your device into flashmode.
15/048/2013 19:48:48 - INFO - Device connected in flash mode
15/048/2013 19:48:48 - INFO - Opening device for R/W
15/048/2013 19:48:48 - INFO - Reading device information
it stuck at reading device information 4ever
this how it looks when i try to flash kernel
15/057/2013 19:57:05 - INFO - Device connected in fastboot mode
15/057/2013 19:57:14 - INFO - Selected kernel (boot.img or kernel.sin): C:\2\nemesis.elf
15/057/2013 19:57:14 - INFO - HotBooting selected kernel
15/057/2013 19:57:14 - INFO - FASTBOOT Output:
creating boot image...
creating boot image - 5791744 bytes
downloading 'boot.img'...
(bootloader) USB download speed was 21691kB/s
OKAY [ 0.278s]
booting...
FAILED (remote: Wrong range:0x10008000-0x1058d687. Ok:0x00000000-0x05efffff)
finished. total time: 0.286s
15/057/2013 19:57:16 - INFO - Device disconnected
I was trying different kernel...always the same :crying:
hum wich option r u choosing in flashtool?
for fw and kernel tell me what u choosin step by step please
then do u still have a cwm installed?
sent with my perfexperia P using tapatalktak 2
Alx31TLse said:
hum wich option r u choosing in flashtool?
for fw and kernel tell me what u choosin step by step please
then do u still have a cwm installed?
sent with my perfexperia P using tapatalktak 2
Click to expand...
Click to collapse
for FW
flashtool > bootmode chooser > flashmode
then I choose FW e.g. 6.2.A.1.100 Central Europe or 6.1.1.B1.54 Sony
I exclude TA and final verification and the result is always the same it stucks at READING DEVICE INFORMATION
for kernel
flashtool > bootmode chooser > fastboot mode
here I was trying both methods - Selecet kernel to HotBoot | Select kernel to flash, none of them works
I found myself unable to relock bootloader via flashtool
it says my device cannot be unlocked, but it already is unlocked and device can be unlocked as it says on service menu (right now it says bootloader unlocked = yes)
I think that I somehow messed up my partitions or deleted partition table....Is there some way to rebuilt device partitions, so I am able to flash again? The number of bad blocks (error when trying to flash kernel) is the exact number of all blocks on my sdcard.
I Think that rebuilding device partition table is the solution, but idk how.....
skynetko said:
for FW
flashtool > bootmode chooser > flashmode
then I choose FW e.g. 6.2.A.1.100 Central Europe or 6.1.1.B1.54 Sony
I exclude TA and final verification and the result is always the same it stucks at READING DEVICE INFORMATION
for kernel
flashtool > bootmode chooser > fastboot mode
here I was trying both methods - Selecet kernel to HotBoot | Select kernel to flash, none of them works
I found myself unable to relock bootloader via flashtool
it says my device cannot be unlocked, but it already is unlocked and device can be unlocked as it says on service menu (right now it says bootloader unlocked = yes)
I think that I somehow messed up my partitions or deleted partition table....Is there some way to rebuilt device partitions, so I am able to flash again? The number of bad blocks (error when trying to flash kernel) is the exact number of all blocks on my sdcard.
I Think that rebuilding device partition table is the solution, but idk how.....
Click to expand...
Click to collapse
Then sorry bro i have no clue! i would like to say if u still have access to cwm; format everything in mounts and storage and make data/factory reset...
maybe someone else gonna give u more ideas...when u have troubles u flash ftf and everythings come back but u, u are deep into it!
i assume too the rom doesn t load...cuz u can still flash an ftf in zip file from cwm

E10i stuck at boot screen with Sony Ericsson logo and doesn't enter recovery mode

Hi, my phone is bricked I think, it happened after tried to install cm7 mini rom. Now I can't enter recovery mode and my phone stucks at boot screen. I tried to flash stock rom but it didn't change can anyone help me? Thank you so much.
marielito said:
Hi, my phone is bricked I think, it happened after tried to install cm7 mini rom. Now I can't enter recovery mode and my phone stucks at boot screen. I tried to flash stock rom but it didn't change can anyone help me? Thank you so much.
Click to expand...
Click to collapse
You should have flashed the nAa-kernel with MiniCM7.
How did you flash your stock ROM?
BTW, as long as you get a kernel-logo your phone isn't bricked at all
I'm flashing the stockrom by using the flashtool but it gives error, I cant get into recovery so I cant install update from sdcard.
marielito said:
I'm flashing the stockrom by using the flashtool but it gives error, I cant get into recovery so I cant install update from sdcard.
Click to expand...
Click to collapse
Is your bootloader locked or unlocked?
I think locked but Im not sure how can I learn it?
marielito said:
I think locked but Im not sure how can I learn it?
Click to expand...
Click to collapse
Download this, it's about 211MB, although the download may indicate otherwise, just wait till it's finished. It's SonyEricsson stock firmware, flashable on locked bootloaders.
Put it in the /firmwares subfolder of where you installed flashtool and flash it to your phone. (By the way: If there is a x10blrelock.ftf in there, delete it, if you flash that accidentally, you will have bricked your phone)
This should prevent the error you got earlier when flashing stock firmware and get your phone back in working order.
If you want to upgrade your phone to MiniCM7, you will have to unlock your bootloader and flash the nAa-14 kernel for the E10i. There are links to instructions for that in the kernel-threads opening post.
I need help urgently :'/
which flashtool I need to use? I already downloaded that one but Im receving error while flashing it
07/007/2014 22:07:18 - INFO - Found at USB\VID_0FCE&PID_ADDE\6&206D2EFF&0&2
07/007/2014 22:07:18 - INFO - Start Flashing
07/007/2014 22:07:18 - INFO - VER="R8A029";DATE="20100601";TIME="12:17:00";
07/007/2014 22:07:18 - INFO - Flashing loader
07/007/2014 22:07:20 - INFO - PROT_VER="02";DATE="20100615";TIME="17:28:00";VER="R4A045";CXC="1229-3641";TYPE="S1_LOADER";UNIQUE_DEV_ID="BC9A8A88A85D1ED128FC13D90752B079EA353277";SEC_LOCK_STATUS="LOCKED";OTP_DATA="4DFD7700470404000F0804201C6F3982";IMEI="35540701561762";AID_VERSION="0004";EROM_AID="0001";LOADER_AID="0001";SW_AID="0001";CUST_AID="0001";SIM_LOCK_AID="0001";HWCONF_AID="0001";PROD_AID="0000";ACTIVE_LOADER_AID="0001";MAN_ID="002C";DEV_ID="00BC";EXT_DEV_ID="0055";SIN_VER="0001";AID_TAMP="NOT_TAMPERED";MAX_PKT_SZ="00010000";AUTH_LEVEL="NONE";AUTH_MET="0001";CARD_PRESENT="YES";CARD_SIZE="8GB";CARD_DATA="";LOADER_ROOT="S1_Loader_Root_8e35";EROM_ROOT="S1_EROM_Root_f54f";SW_ROOT="S1_SW_Root_3edc";CUST_ROOT="S1_Cust_Root_732f";SIM_LOCK_ROOT="S1_SL_Root_a640";HW_CONF_ROOT="S1_HWConf_Root_4b8c";
07/007/2014 22:07:20 - INFO - Flashing finished.
07/007/2014 22:07:20 - INFO - Now unplug the device and power it on
07/007/2014 22:07:20 - INFO - Then go to application settings
07/007/2014 22:07:20 - INFO - turn on Unknown Sources and Debugging
this is how it results when I try to flash locked stock rom.
any ideas? :'(
marielito said:
any ideas? :'(
Click to expand...
Click to collapse
Haven't seen that before... It flashed on every one's phone who've tried it
no way to get my phone work?
marielito said:
no way to get my phone work?
Click to expand...
Click to collapse
Did you try a repair with PC Companion or with Sony Update Service?

Categories

Resources