Hello, I have bricked my Galaxy S2 and I can enter the Download Mode, so I got a firmware and installed it via Odin, however, the bootloader loops?
PLEASE HELP ME!
Sill4nt said:
Hello, I have bricked my Galaxy S2 and I can enter the Download Mode, so I got a firmware and installed it via Odin, however, the bootloader loops?
PLEASE HELP ME!
Click to expand...
Click to collapse
tried with reflash partition (pit) should help it boot again, or go into recovery mode and wipe factory/data
Sill4nt said:
Hello, I have bricked my Galaxy S2 and I can enter the Download Mode, so I got a firmware and installed it via Odin, however, the bootloader loops?
PLEASE HELP ME!
Click to expand...
Click to collapse
Which firmware you flashed through ODIN?
Sent from my GT-I9100 using Tapatalk 2
if your experiencing a boot loop after flashing go into recovery and wipe data see if that helps
Sent from my GT-I9300 using xda premium
post issues in the Q&A section not general
or read this bootloop thread
forum.xda-developers.com/showthread.php?t=1108499
bootloop happens when the Rom corrupts during installation or installing any other application. or some people using ROM Manager . Never use ROM Manager you will loose the cwm. Download any ROM which supports Odin. flash it you should be fine. Then you can switch back to your favorite ROM. this is a good rom you can flash via odin.
http://forum.xda-developers.com/showthread.php?t=1095274
PS : if you don't like to flash ROM just flash CWM via Odin which should give you access to CWM. you can restore you backup ROM if you have one or have any other ROM in your phone memory.
Sill4nt said:
Hello, I have bricked my Galaxy S2 and I can enter the Download Mode, so I got a firmware and installed it via Odin, however, the bootloader loops?
PLEASE HELP ME!
Click to expand...
Click to collapse
I was facing the same problem some days ago, but after surfing this forum, I realised that if you have Kies running in the background, Odin will behave oddly and will not flash the firmware by going into a bootloader loop.
I suggest that you re-install the drivers again and make sure that Kies is not running in the background when you are flashing through Odin (just fire up your Task Manager in Windows and terminate the Kies process).
Hope this helps you...
Related
Hi there,
I had Cyanogenmod 7 installed on my unbranded Galaxy S2 up until yesterday where I got stuck in a never ending (or at least >30mins) bootloop on the Cyanogenmod splash screen.
Not having access to the internet at that point, I tried a few things including flashing a different kernel onto it using Odin, complete reset, and now it's stuck on the Galaxy S II splash screen.
It is still recognised when I connect it via USB, and can access the download mode and Android system recovery, but to be honest I have no idea how to proceed from here.
Have I bricked it?!
Thanks for any help.
Try flashing original Samsung stock firmware,I had this issue yesterday and only stock firmware resolved my problem.
Sent from my GT-I9100 using xda premium
Which firmware did you use? XXKI4 isn't working for me.
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
I get the stock recovery mode when I boot. I have flashed the two kernels I had saved on my laptop (the insecure and stock ones I used when rooting) through Odin and still get stuck at the Galaxy S II Boot screen...
condieboy said:
Which firmware did you use? XXKI4 isn't working for me.
Click to expand...
Click to collapse
Go to sammobile and search for your
Firmware, download it and flash via Odin. Worked for me.
Sent from my GT-I9100 using xda premium
condieboy said:
I get the stock recovery mode when I boot.
You require a root and CWM install to use Clockwork Recovery .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Click to expand...
Click to collapse
bubba949 said:
Go to sammobile and search for your
Firmware, download it and flash via Odin. Worked for me.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Massive e-props! After one wrong firmware, second shot got the job done!
Thanks a lot for all the help!
Glad to hear it.
Sent from my GT-I9100 using xda premium
Hi experts, I need your urgent help, I've been dragging this today with no solution.
First my s3 showed a "cannot read sdcard" when I tried to flash the Temasek v.22 update. The phone was trapped in a loop and I at least I could enter recovery.
I though it was a recovery problem and I flashed a new recovery (6.0.1.9.) via ODIN. The result was the phone stucked in the "Samsung Galaxy s III" logo and I cannot even access to the CWM.
The last thing I've tried was flashing a Stock ROM via Odin but it did fail. The only menu I can enter now is the Download Mode.
Does anybody know if I'm bricked or what I should do to solve it?
Thanks
i suggest installing stock rom via odin, flash recovery and than install rom.
Im afraid your hp might be bricked.
Ok lets do some checks.
Go to download mode and see whether the brand name '' i9300'' is there.. If yes, there is hope...
Sent from my GT-I9300 using xda app-developers app
my rooted sgs3 i9300 got stuck in bootloop after automatic software update
it is not booting even in recovery mode ,
but it is only booting in download mode
can i flash stock firmware on it ? please help me and give me link to stock firmware
Thanks
it is soft bricked and only going in download mode
Yes mate you can thru odin
http://forum.xda-developers.com/showthread.php?t=1671969
Sent from my GT-I9300 using Tapatalk 2
I was able to use the Emergency firmware recovery in Samsung Kies when the same thing happened to me by going into the the Download Mode and plugging my phone in with Kies on.
However, that only worked once out ff the 3 times i had boot problems due to errors when flashing.
What worked every time is flashing stock firmware using Odin. Here is a link to the stock firmware collection -
http://forum.xda-developers.com/showthread.php?t=1646610
please help
when i flash via odin i get error there is no Pit partition and FAIL
chubby65 said:
Yes mate you can thru odin
http://forum.xda-developers.com/showthread.php?t=1671969
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
when i flash via odin i get error there is no Pit partition and FAIL
Solved
Here is the solution:
http://forum.xda-developers.com/showthread.php?p=38780087#post38780087
Necro poster .
jje
Merci...
Hi,Bootloop after Freeze of my Stock I9300
1) emergency Kies recovery ...DONE
2) Loop again :crying:
3) Full Wipe from recovery stock menu home / vol up / power
4) OK but wiped ^^
See and thank you
GS III GT-I9300 boot problem
2531prasad said:
my rooted sgs3 i9300 got stuck in bootloop after automatic software update
it is not booting even in recovery mode ,
but it is only booting in download mode
can i flash stock firmware on it ? please help me and give me link to stock firmware
Thanks
Click to expand...
Click to collapse
I have the same problem, I can only access download mode. I only have a mac available and help to get my phone back working. Please help!
Thanks,
Ounza
Read the stickies in general forum, try the solutions in the thread you resurrected, plenty of options instead of just asking for a solution.
any fix was found for this.. tried the one that said to remove power butto and it did not work. could boot into recovery and stay there do not shut down or for odin mode.
I have a rooted galaxy s2, I was on a custom rom and decided to restore the stock one. then I flashed siya kernel because it was shutting down randomly. then I opened superSU app after it updated automatically on the market. it asked to update (and something about binary) choosing normal update or using cmw or twrp if oono a custom rom. I chose the cmw or twrp by accident and said that if the phone didn't reboot into rrecovery I have to do it manually
the phone **** down and when I try to turn it on it doesn't. the GALAXY S2 logo shows up then it turns black . I also tried to boot it into recovery and it didn't work either. so what's the problem and how can I fix it
Download mode work? Flash stock with odin
Or flash siyah in odin then boot to recovery and do a factory reset
andrewwright said:
Download mode work? Flash stock with odin
Or flash siyah in odin then boot to recovery and do a factory reset
Click to expand...
Click to collapse
odin can't recognize the phone
even though I installed the usb drivers and kies
I guess it's because I can't enable usb debugging since the phone doesn't turn on
any other idea?
Check out @Hopper8 thread for odin trouble
No need for usb debugging for an Odin flash. As andrewwright said, click the link in my signature and follow the troubleshooting steps.
Sent from a galaxy far, far away
Hi hopper, have you checked your PM today?........
Sent from either my S2 or my W via XDA developers app
Hi
I have a Samsung Galaxy Pocket Neo GT-S5310...
The sad thing is that, a while ago it stopped working and now it's stuck on the boot screen (Samsung GALAXY POCKET Neo GT-S5310)
I have tried to perform a factory reset through the built-in recovery mode (volume up + home + power), but unfortunately, I couldn't access the recovery mode and the phone goes directly to the boot screen.
And since the only thing I could do was accessing the Download Mode, so I tried to recover it by installing an official firmware with Odin3_v3.07... but it didn't solve the problem...
So what would you guys suggest?
can't delete this reply... could an admin please do it?
Installing cwn recovery and flash rom
D-Moon said:
Hi
I have a Samsung Galaxy Pocket Neo GT-S5310...
The sad thing is that, a while ago it stopped working and now it's stuck on the boot screen (Samsung GALAXY POCKET Neo GT-S5310)
I have tried to perform a factory reset through the built-in recovery mode (volume up + home + power), but unfortunately, I couldn't access the recovery mode and the phone goes directly to the boot screen.
And since the only thing I could do was accessing the Download Mode, so I tried to recover it by installing an official firmware with Odin3_v3.07... but it didn't solve the problem...
So what would you guys suggest?
Click to expand...
Click to collapse
The only way to :cyclops: the problem is to install cwn recovery and flash another rom .
see this thread to install cwn http://forum.xda-developers.com/showthread.php?t=2728655 ::silly:
and try this rom http://forum.xda-developers.com/poc...om-cm-11-0-galaxy-pocket-neo-duos-gt-t2833952
see this thread to find other rom http://forum.xda-developers.com/showthread.php?t=2731774:p
wipe data then flash the original FIRMWARE
Ashish1998 said:
wipe data then flash the original FIRMWARE
Click to expand...
Click to collapse
How can I wipe data if I can't access the recovery mode... :/
D-Moon said:
How can I wipe data if I can't access the recovery mode... :/
Click to expand...
Click to collapse
hey bro..
:silly: installing cwn recovery via download mode is the only way to bring back ur device
sksenthil said:
hey bro..
:silly: installing cwn recovery via download mode is the only way to bring back ur device
Click to expand...
Click to collapse
actually the only way would be flashing the bootloader, unfortunately I couldn't find it anywhere... the official firmware (from sammobile or samsung-updates) does not contain the bootloader flash...
Download stock from sammobile.com and flash it via Odin
Hackerpunk1 said:
Download stock from sammobile.com and flash it via Odin
Click to expand...
Click to collapse
read my previous reply... :/
D-Moon said:
read my previous reply... :/
Click to expand...
Click to collapse
What are the files in the firmware you downloaded?
Hackerpunk1 said:
What are the files in the firmware you downloaded?
Click to expand...
Click to collapse
S5310XXAMK1_S5310OJVAMK3_S5310XXAME1_HOME.tar.md5
and
SS_DL.dll
Which version of Odin are you using?
Hackerpunk1 said:
Which version of Odin are you using?
Click to expand...
Click to collapse
3.09
Sent from my GT-I9300 using XDA Free mobile app
Just load the file "S5310XXAMK1_S5310OJVAMK3_S5310XXAME1_HOME.tar.md5" ONLY in the PDA section. Please make sure you have the right drivers installed.
stuck in bootloop ...
Hi all, i can't find topic for Samsung s5303, and i have a problem with this device.
someone can help me ?
→ the phone stuck in bootloop ←
- i can start in download mode and get connected in odin.
i had flash all the 12 roms that i have found, (including custom roms and stock roms, only one package/ full package using re-partition with .PIT files. and various kernel models)
i made all wipes, (after and before flash a rom)
when the phone try to boot up, don't appear nothing about
errors (like can't mount data reboot or others...)
the phone try to boot up and keep in samsung logo, after 30 seconds i have a full shutdown, are not possible to turn on using power button..
if i take off the battery and reinsert after 1 minute, phone try to turn on and repeat the same thing
(have happened in all firmwares found)
are a hardware problem ?
may be someone have an idea to fix this issue?
since now, thanks.
Cant boot to recovery
Hi sorry for the thread revival but I have run out of ideas. Same problem as OP. Odin flash is successful but stuck on samsung logo when trying to boot to recovery.
S5310i 4.4.2
Any suggestions would be much appreciated. Anyone found a solution to this?
When you use Odin to flash, when it has finished, it always boot to recovery, there you have to wipe data and cache, then it works properly!
Hackerpunk1 said:
When you use Odin to flash, when it has finished, it always boot to recovery, there you have to wipe data and cache, then it works properly!
Click to expand...
Click to collapse
After flashing recovery with odin I am still stuck at the S5310 Neo splash screen unable to boot into recovery. Has this maybe got something to do with a conflict between android versions? As the S3510i comes with 4.4.2 stock, not 4.1.2.
Did you tried using the pit file for re-partitioning?
Hackerpunk1 said:
Did you tried using the pit file for re-partitioning?
Click to expand...
Click to collapse
Thanks for your help. Could you please explain more about this? Where would I find the pit file to flash? Do I tick re-partition in odin? Never flashed pit before. worried about bricking the device.
I am struggling to find the PIT file for my specific device (S5310i). its only on a handful of websites asking for paid subscriptions. Could anybody possible direct me to where I can find:
CORSICAVE3G_EUR_OPEN. Pit
I have downloaded the corsicass.pit and S5310_corsicass.pit but am not sure if this will work on any S5310 variant?