Hey guys.
I have a GT- i9300, I rooted it in odin with CF root, no worries, installed foxhounds Rom with SiyahKernel. All was fine for a few weeks. My phone then randomly shut down one day and would not boot. (had not installed any 3rd party apps, custom upgrades or anything for a few days).
My phone now only boots to the Samsung splash screen. Will not boot into recovery mode either. Download mode still works
So i tried to re flash the kernel through odin but I get an error "no PIT partition"
Tried flashing a stock Firmware through odin, same error.
Tried flashing CWM again through Odin, same error,
Tried flashing CF root again in Odin, same error.
Any ideas please help???
I have looked all over the net for two days now and found some people with same problem but they have not fixed it yet.
Would a 3-part firmware work in Odin? If so I have downloaded countless ones only to find they are the single .tar file
3 part works via Odin.
jje
Sent from my GT-I9300 using xda premium
Any idea where I can get one from? Every Rom I download is only the one .tar file.
Sent from my GT-I9100 using xda app-developers app
same problem here...
any help will be very appreciated...
tzujeff1008 said:
same problem here...
any help will be very appreciated...
Click to expand...
Click to collapse
Hey Man, I have been searching the net for days now and trying countless different things in Odin but still no Luck. From what I have read if we can find a 3-part firmware +pit file and we flash them through Odin and tick re-partition it should fix it.
Problem being I cant find one, I have asked on other forums and asked Intratech himself but no response yet. If I figure it out though I'll let you know and you do the same for me hey?
R4M30 said:
Hey Man, I have been searching the net for days now and trying countless different things in Odin but still no Luck. From what I have read if we can find a 3-part firmware +pit file and we flash them through Odin and tick re-partition it should fix it.
Problem being I cant find one, I have asked on other forums and asked Intratech himself but no response yet. If I figure it out though I'll let you know and you do the same for me hey?
Click to expand...
Click to collapse
hey, no luck for me so far. I am from Taiwan. I have found 5-part stock firmware, which has pit, bootloader, phone, csc, PDA. But it gave me another error: Re-partition operation failed. It seems the partition table has been crashed.
I have returned it for repair(distributor), and I was told that the phone needs to replace the mainboard. And since they told me I have tried to install custom firmware or software, I no longer have the warranty. The fee is unacceptable high, almost half price of the phone.
I will take my phone back and send it to Samsung repair center. Wait and see if any different solutions Samsung can provide me.
I am still looking for other possible solutions, and if I found one, I definitely will share it with you.
The worse thing is the hardware damage. Hope it is not....
Hi,
I'm having the exact same issue...
It happened me after installing CM10 Prev. #4.. I tried to make a phone call to test the sound problem. and suddenly it rebooted into a boot-loop.
After that I tried to re flash the .zip file to get it booting again but i couldn´t even get into {install zip from internal SD Card]
Then i tried to go back to stock with Odin but didn't work..
Tried to repartition with different .pit files on different pc's with different OS. but nothing helped..
I'm planning on returning it too. I hope they will repair it...
i'll let you know and looking forward to hear something from you.
I ended up taking mine back and it got replaced under warranty
Sent from my GT-I9300 using xda app-developers app
tzujeff1008 said:
hey, no luck for me so far. I am from Taiwan. I have found 5-part stock firmware, which has pit, bootloader, phone, csc, PDA. But it gave me another error: Re-partition operation failed. It seems the partition table has been crashed.
I have returned it for repair(distributor), and I was told that the phone needs to replace the mainboard. And since they told me I have tried to install custom firmware or software, I no longer have the warranty. The fee is unacceptable high, almost half price of the phone.
I will take my phone back and send it to Samsung repair center. Wait and see if any different solutions Samsung can provide me.
I am still looking for other possible solutions, and if I found one, I definitely will share it with you.
The worse thing is the hardware damage. Hope it is not....
Click to expand...
Click to collapse
Hello tzujeff1008
I have same problem & I couldn't find that ROM.
Thanks first of all & Please Give me link of that ROM or tell me where I can find that.
R4M30 said:
I ended up taking mine back and it got replaced under warranty
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
mine too got repaired ,under warranty
Sent from my GT-I9300 using xda premium
tzujeff1008 said:
mine too got repaired ,under warranty
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
wo that nice ..hey after flashing.. have u dne trangle away? asking coz u have rootd and still u got replcement: S ???
Sent from my GT-I9300 using xda premium
please pleeeeeeeeeeeeeeease help me guys!!!!!!!!!!
my phone is ****ed up.
i was runing checkrom V3.5.connected device to AC charger(supplied charger) and then slept for 1 hour.
when iwake up my device stuck at samsung logo.
i can't enter recovery mode,just can go to download mode.i got there and tried to flash CF-root v6.4 with odin v1.85(in chainfire thread said),when i hit start in odin it fails and says there is no PIT partition.what should i do?
i downloaded odin from SAMMOBILE.COM, and in zip file there is PIT file.now what should i do?should i flash stock firmware?
it's important to say i had SGS2 before and i'm not noob.
pleeeeeeeeeeeeeeease help me:crying::crying:
which .PIT file should i use?
GT-I9300_mx_20120220.pit
GT-I9300_mx_20120322.pit
GT-I9300_mx_20120329.pit
M0_20120220.pit
mx.pit
can i try to flash phone via odin with .PIT file and kernel
boobool said:
please pleeeeeeeeeeeeeeease help me guys!!!!!!!!!!
my phone is ****ed up.
i was runing checkrom V3.5.connected device to AC charger(supplied charger) and then slept for 1 hour.
when iwake up my device stuck at samsung logo.
i can't enter recovery mode,just can go to download mode.i got there and tried to flash CF-root v6.4 with odin v1.85(in chainfire thread said),when i hit start in odin it fails and says there is no PIT partition.what should i do?
i downloaded odin from SAMMOBILE.COM, and in zip file there is PIT file.now what should i do?should i flash stock firmware?
it's important to say i had SGS2 before and i'm not noob.
pleeeeeeeeeeeeeeease help me:crying::crying:
which .PIT file should i use?
GT-I9300_mx_20120220.pit
GT-I9300_mx_20120322.pit
GT-I9300_mx_20120329.pit
M0_20120220.pit
mx.pit
can i try to flash phone via odin with .PIT file and kernel
Click to expand...
Click to collapse
You have no choice! Try every pits you got, you might get another error : Re-partition operation failed...
So far, I believe that is hardware damage, and there is nothing you can do but send it back for repair(replacement).
If you have run triangle away before the phone crashed, then you are lucky, You might get replacement under warranty.
I did that before broken. There was no counter, but showed custom rom in download mode.
So it is hard to judge if I flash custom rom or not. The second time I sent my phone back to same repair center, they finally did replacement for me for free.
Good luck to you, and hope it is not hardware damage.
tzujeff1008 said:
You have no choice! Try every pits you got, you might get another error : Re-partition operation failed...
So far, I believe that is hardware damage, and there is nothing you can do but send it back for repair(replacement).
If you have run triangle away before the phone crashed, then you are lucky, You might get replacement under warranty.
I did that before broken. There was no counter, but showed custom rom in download mode.
So it is hard to judge if I flash custom rom or not. The second time I sent my phone back to same repair center, they finally did replacement for me for free.
Good luck to you, and hope it is not hardware damage.
Click to expand...
Click to collapse
many thanks for really complete answer brother.
tried to flash stock firmware.after 2 minutes odin said there is no pit partition.
again tried and this time with PIT file, happened what you expected ,it said Re-Partition operation failed.:crying::crying:
luckily i don't have yellow triangle and in download mode it says samsung official.so i think it's better to send it to a warranty service center.
another question i have is why does this problem appear ?
i just connected phone to the charger and slept for 1 hour.when i woke up saw samsung logo on phone and it happened what you know.
again thanks for your help brother.
boobool said:
many thanks for really complete answer brother.
tried to flash stock firmware.after 2 minutes odin said there is no pit partition.
again tried and this time with PIT file, happened what you expected ,it said Re-Partition operation failed.:crying::crying:
luckily i don't have yellow triangle and in download mode it says samsung official.so i think it's better to send it to a warranty service center.
another question i have is why does this problem appear ?
i just connected phone to the charger and slept for 1 hour.when i woke up saw samsung logo on phone and it happened what you know.
again thanks for your help brother.
Click to expand...
Click to collapse
Did you try with GT-I9300_mx_20120329.pit ? works fine for I9300 repartition...
boobool said:
many thanks for really complete answer brother.
tried to flash stock firmware.after 2 minutes odin said there is no pit partition.
again tried and this time with PIT file, happened what you expected ,it said Re-Partition operation failed.:crying::crying:
luckily i don't have yellow triangle and in download mode it says samsung official.so i think it's better to send it to a warranty service center.
another question i have is why does this problem appear ?
i just connected phone to the charger and slept for 1 hour.when i woke up saw samsung logo on phone and it happened what you know.
again thanks for your help brother.
Click to expand...
Click to collapse
I connected phone to the charger over night, and when I woke up, it just happened.
I have no clue why this happens, just doubt if the charging system has flaw.
Great that I can share experience with you guys.
Chewee91 said:
Did you try with GT-I9300_mx_20120329.pit ? works fine for I9300 repartition...
Click to expand...
Click to collapse
tzujeff1008 said:
I connected phone to the charger over night, and when I woke up, it just happened.
I have no clue why this happens, just doubt if the charging system has flaw.
Great that I can share experience with you guys.
Click to expand...
Click to collapse
thanks for responses brothers.
i tried 5 different pit files and one of them was GT-I9300_mx_20120329.pit.
it didn't help.actually when inserting pit file in odin it says Re-partition operation failed. and when pit place in odin is empty it says there is no PIT partition.
i tried to flash 3 part stock rom,same result.
tried those methods with odin 3.04 and odin 1.85, both of them gave me same result.:crying::crying:
If you always search a 3 parts firmware, try this one:
http://hotfile.com/get/159511026/500faffb/47a90c3/I9300XXALE8_I9300OJVALE7_FWD.zip without and with pit file
(morocoo CSC i think), just in order to test if it's works.
If it is, you'll flash your firmware (CSC THR) here:
http://hotfile.com/get/164216390/500fb0d0/c94977c/I9300XXBLFB_I9300OJVBLF3_THR.zip
If don't work, use warranty...
Just letting you know that i had the Exact same problem.
When trying to flash (when in download mode) it would always error when trying to get the PIT information.
Nothing would work, besides from download mode. When trying to hard reset, it would get to the logo screen and immediately turn off.
It was rooted + cmw + no triangle away. So it could be easily seen that it rooted
I took it back to warranty.
It was a fault motherboard. That was the issue. They replaced it and re-flashed with stock os.
And it was covered under warranty (the best part).
Same I issue I think
Hi. I think I have the same problem with my unrooted, stock S3. (unbranded UK)
Just suddenly apopeared with the grey battery with the static "O" symbol in it, and when booting doesn't get past the first Samsung screen.
Can get into recovery mode, when trying Odin with XXBLG8 stock ICS ROM, I get the "no PIT partition" error.
Please tell me my phone isn't dead :crying:...
Cheers
Brad
Related
Hi all, I hope you guys can help as I'm coming up blank here after days of trying to fix this.
First, yes I read this thread and a few people were reporting the same problem but the solution was always to flash a stock firmware with odin.
Right now my wife's phone is stuck in a boot loop, she doesn't do anything out of the ordinary with it, I rooted it when she first got it 3 months ago and then flashed a stock kernel to get rid of the yellow triangle and it has worked perfectly until last week when she told me it was stuck at the galaxy s2 logo. No problem I though, I'll just flash a stock rom with odin and all will be well.
Well it didn't work out that way, I've flashed the original firmware, an ICS leak, Villainrom 1.1 and XXKI3 multiple times, with and without pit file + re-partition. I've flashed the old bootloader and I've tried a few custom kernels as well, and multiple combinations of the above. Nothing is getting it past the boot loop. The only result I've had that is any different to how I started is with an ICS build I got a screen saying kernel panic upload (or something like that, I don't have that rom flashed at the moment). When I connect at this time odin recognises the phone so I guess it's in download mode.
I can't get into recovery mode so I can't do a factory reset, when I press vol-up, home and power I get a blank screen for a moment followed by the same boot loop. I can get into download mode and odin is reporting successful on every flash. When I flash a custom rom or kernel I get the yellow triangle, it goes away when I flash a stock rom or kernel.
According to my wife just before the crash android market reported updates available and she installed them. I don't know if that's related or not but she says when she went back to the phone it had hung so she turned off the phone, upon turning it on it was stuck in boot (the big animated purple S part of the boot) so she removed the battery and since then it doesn't get past the initial galaxy S2 screen, sometimes, depending on which kernel it's on, the galaxy screen goes blank for a second or two and then the logo comes back.
I've really tried everything I can think to try, warranty isn't really an option as I'm in Saudi Arabia and I've been told it will take 3 months to get the phone back, also I can't easily access a jig, I'd have to make one and I'm not too confident in my ability to do that.
If anyone has any ideas at this point please help, I can't think of anything else I can do here.
tl;dr random boot loop, tried flashing everything I can find, no recovery mode but download mode works fine, help!
davegene said:
If anyone has any ideas at this point please help, I can't think of anything else I can do here.
Click to expand...
Click to collapse
Flash a full wipe firmware and see if that helps, if you need one there is a link at the bottom of my insecure kernel thread.
Thanks Odia,
I just flashed the firmware at the bottom of your thread, I9100XWKE7_CL215725_REV02_user_low. Tried it twice for good measure.
Unfortunately nothing has changed on the phone, still can't get into recovery or past the galaxy s2 logo.
davegene said:
Thanks Odia,
I just flashed the firmware at the bottom of your thread, I9100XWKE7_CL215725_REV02_user_low. Tried it twice for good measure.
Unfortunately nothing has changed on the phone, still can't get into recovery or past the galaxy s2 logo.
Click to expand...
Click to collapse
Have you tried with repartition and update bootloader ticked?
I didn't tick either of those this time but I have ticked repartition with a different firmware that came with a pit file. Do I need a pit file or can I tick repartition without it?
Sent from my GT-I9100 using XDA App
davegene said:
I didn't tick either of those this time but I have ticked repartition with a different firmware that came with a pit file. Do I need a pit file or can I tick repartition without it?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
You need a pit file, use the 1 from the other firmware.
Ok, I just tried XWKE7 again with a pit file with re-partition ticked. Also tried flashing the old bootloader again with update bootloader ticked.
No change I'm afraid.
davegene said:
Ok, I just tried XWKE7 again with a pit file with re-partition ticked. Also tried flashing the old bootloader again with update bootloader ticked.
No change I'm afraid.
Click to expand...
Click to collapse
Most strange, look like your off to service
That's most unfortunate, I'm in Saudi Arabia and they have quoted 3 months to get the phone back under warranty although in reality I'd be lucky to get it back at all.
Are my options really exhausted or is there anything extreme I can try?
I ended up making a jig and took it for warranty repair and they were able to do it locally, it only took a few days.
The curious thing is even though I repartitioned several times using two different pit files the sdcard partition was still intact.
I'm pretty sure I was doing it right and the yellow triangle was coming and going as I was flashing stock and custom kernels so the flashes were taking.
I don't speak Arabic so I couldn't ask how they fixed it but what do you think was the problem? I was very surprised to find the data intact, it even had the same stock ROM that I flashed before I took it for service still installed.
Anyway thanks for your help in this thread odia.
Sent from my GT-I9100 using xda premium
I'd love to know what they did.
Sent from my GT-I9100 using XDA App
I am new with the Android,
i have a i9100 galaxy, which i have flashed and other phones also (for freinds) several times with new firmware 2.3.4
Bubut this time i was trying ICS on my s2, after installing ICS with odin the phone did not perform well and it was not upgrading the market to google play, so i decided to reformat and install from scratch,
I entered the recovery mode and formated all options then into download mode and i tried to install ICS and the install was not successfully, then i do not why! i decided to reflash the pit, all went well and after the flashing it shut down and never came back on again
Now i have an expensive brick.
It does not start at all (i have tried download mode, recovery mode, remove battery etc.. no luck) it is totally dead
Any one Help !!!!
Thank you
Alot of guides said never do the .pit repartition because you may hard brick your device. Send it to samsung service center for repair.
Sent from my GT-I9100 using xda premium
Seriously, why cannot people understand that flashing the PIT file is totally unnecessary and will more often than not, end up bricking your device?
You'll need to send it to Samsung for repairs.
ephraim033 said:
Alot of guides said never do the .pit repartition because you may hard brick your device. Send it to samsung service center for repair.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thank you for the quick reply, i was hoping for a different answer
i have read that that a JTag cable might help i will try later and get back with results
JTAG repair equipment is expensive & takes expertise to use. You can send it to someone who does JTAG repairs; this one in the US does them for $50 USD, no doubt there are others you can find via Google.
rdergham said:
Thank you for the quick reply, i was hoping for a different answer
i have read that that a JTag cable might help i will try later and get back with results
Click to expand...
Click to collapse
rdergham said:
I am new with the Android,
i have a i9100 galaxy, which i have flashed and other phones also (for freinds) several times with new firmware 2.3.4
Bubut this time i was trying ICS on my s2, after installing ICS with odin the phone did not perform well and it was not upgrading the market to google play, so i decided to reformat and install from scratch,
I entered the recovery mode and formated all options then into download mode and i tried to install ICS and the install was not successfully, then i do not why! i decided to reflash the pit, all went well and after the flashing it shut down and never came back on again
Now i have an expensive brick.
It does not start at all (i have tried download mode, recovery mode, remove battery etc.. no luck) it is totally dead
Any one Help !!!!
Thank you
Click to expand...
Click to collapse
Same problem here , after flashing PIT my phone goes black with no respond at all , no charging .....
As stated on other link, sounds like youve both flashed the wrong pit file and the only repair for this is JTAG service.
Flashing a pit is safe, so long as you do it the correct way and flash all the accompanied files, ive flashed samsung pits and never bricked before, there shouldnt be confusion because samfirmware release a lot of stock roms with the pit file and theres plenty of guides to flash them and there is only 1 pit file by samsung for the i9100, its really up to you guys to make sure you are using the correct file when flashing your phones, if you dont know then you should never touch anything more advanced than a 1 file package.
Hope you get them sorted but i think youll have problems.
Samsung Galaxy S2 i9100 dead after flash
Hello friends i'm new with Android recently i saw a video from youtube and download the firmware and followed the instructions but sadly my phones totally dead after that no response from my phone when ever i connect it to my laptop through USB it shows the charging icon for few seconeds and also i booted to download mode with USB but no benefit plz help me
I have the international edition of the S3 that a was messing around with, and I ended up installing some rom and now I can't even get into recovery. I've searched around and tried multiple methods of fixing it. The only thing I can access is download mode. Can anyone help?
same my condition ..... it's looks like sudden death ..... try flash any recovery files ... if not ... ur last hope doing PIT then if u failed to 100% successfully .... need a new MotherBoard ... replace it if warranty recover
ps: act like fool and tell them u have sudden Death and u didnt play with anything (dont mention ur flash custom rom/firmware ....it will cancel ur warranty)
sry for lose man , u not the only one ... i cant even replace it with warranty due to bought from another country
good luck
speedman2202 said:
same my condition ..... it's looks like sudden death ..... try flash any recovery files ... if not ... ur last hope doing PIT then if u failed to 100% successfully .... need a new MotherBoard ... replace it if warranty recover
ps: act like fool and tell them u have sudden Death and u didnt play with anything (dont mention ur flash custom rom/firmware ....it will cancel ur warranty)
sry for lose man , u not the only one ... i cant even replace it with warranty due to bought from another country
good luck
Click to expand...
Click to collapse
Do you know where I could find instructions on how to flash a PIT?
this is file come from sammobile.com website
providing u the right PIT file with flasher
http://www.mediafire.com/?ddfpfkk2pb8326k
connect ur mobile , open odin program and then press on PIT button and navigate PIT files then (as i think) choose the latest PIT file with name i9300 (ur mobile Model) and latest date and then hit start ..... good luck but i recommend u send it to ur Samsung repair center if warranty cover
good luck
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
Exactly this^^^^....pit file flashing is an absolute last resort, not a first solution
did you tried flashing 4.0.4 stock rom with odin?
same thing happened to me 2 weeks ago, flashing 4.0.4 and after that flashing 4.1.2 fixed it.
try to do not mess with pit especially if you didn't backup your efs folder. it is not needed.
redstreetwalker said:
it is not needed.
Click to expand...
Click to collapse
moreover, it can render your phone irreparable
Ganjasaur said:
now I can't even get into recovery. The only thing I can access is download mode.
Click to expand...
Click to collapse
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
he cant go to Recovery mode ......(same like my condition) , he just can go to download mode
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
I've already tried to flash a stock firmware, but I still couldn't get it into recovery. I'm not sure if it was the right one though. I have a regular unbranded SIII, is there a specific firmware I should flash?
speedman2202 said:
he cant go to Recovery mode ......(same like my condition) , he just can go to download mode
Click to expand...
Click to collapse
okay? the first thing to do here is just flash a stock ROM, no need for pit files
Mine was stuck before than samsung logo, on the model number screen. Almost 1 second or less after opening the device.
Then i flashed 4.0.4 and magically it opened without any loop or something. Its useless to flash 4.1.2 or any other jb stock rom, for some reason it seems not fixing the loop issue.
Again, there is no problem related with pit files.
Sent from my GT-I9300 using xda premium
It's all individual, what worked for you might not work for others. Don't say that flashing JB is useless, because it's not
I flashed stock 4.0.4 firmware through odin. The operation was successful, but I was still unable to enter recovery. What am I doing wrong?
Ganjasaur said:
I flashed stock 4.0.4 firmware through odin. The operation was successful, but I was still unable to enter recovery. What am I doing wrong?
Click to expand...
Click to collapse
Follow the steps to root and flash your custom ROM again as if you just got your phone. The same thing happened to my T999, and it took me 3 tries doing this to finally get back into Recovery.
try to flash in odin stock rom then root use cwm then try to go to recovery..
My cousin's having the same exact issue and we've been unable to find the proper rom. Can anyone please tell me where to get one? I've downloaded some "international" ones but when i try to upload it it keeps telling me failed, i've tried at least 4 or 5 different roms.
ANY help would be greatly appreciated!!
Phone is:
GT-i9300
using it in the US with StraightTalk in the US (been working like a charm for ~6 months, all of a suddent when into this weird limp mode)
Phone was running jellybean 4.1.1 (through kies) and not rooted
Try several times before giving up. Sometimes it works after when the device feels that you've had enough stress and fear.
I mean the problem is common but it's solved in different ways or different repeats.
But it seems that your problem is a software problem that can be solved.
Glebun said:
It's all individual, what worked for you might not work for others. Don't say that flashing JB is useless, because it's not
Click to expand...
Click to collapse
Sorry for the misunderstanding, i mean flashing jb was useless for me in that situation. Thanks for the correction
Sent from my GT-I9300 using xda premium
Hello,
I read a lot of threads but nothing worked and now I just want to now if my handy is dead! I hope you can give me some information. Maybe some solutions.
Here is my actual situation:
On day my handy was turned off. I tried to turn it on but it keeps in a bootloop. Only the first GT-!9100 was seen and it restarts.
I took out the battery and started it again. Then it booted until the message "App 1 of 1 will be optimized". I waited a long time (about 2 hours) and nothing happend. I took out the battery and tried to boot again. Same problem like at the beginning - again bootloop.
Then I tried to get in recovery mode. It worked! I wiped the cache and restartet my handy. But again bootloop. Now I couldn't get into recovery mode. The droid was lying with a red triangle and my handy restartet automatically. So I tried the download mode. It worked! I downloaded from sammobile the actual firmware I9100XWLSD_I9100DBTLS7_DBT. I tried to flash it with odin v3 1.85 over the PDA button. I connected the handy with odin it tells me that he found my handy and I started to flash. It stucks at cache.img. I waited over night. Nothing happend. Still stucking on cache.img. I took my battery out an dwhen I put it back an started may handy I get now the yellow triangle "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
So tried another one with three parts and PIT. In this time with re-partition in odin. But same procedure. I stucked at cache.img.
I still have the yellow triangle and I only can get into download mode.
Then I heard from soft/hard brick problem. I also tried the solution with only flashing the PIT. But no success
So I tried a custom kernel Clockwork Mode Recovery (GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9.tar) to get in recovery mode back. I tried to flash but it stuicks again at "NAND write". I waited again. Nothing happend. So I restarted my handy with tooking out the battery and putting it back again. But in download mode I see that my handy has a custom binary! So it worked. But I can't get into recovery mode of Clockwork
I also tried CF-Root. Here the same problem!
What's wrong with my handy? Is it broken? I've heard maybe I have to re-partition my hand over adb but I found nothing.
One thing is that for half a year I had a problem with my internal SD. It could not mount. After a update of the firmware (luckiely there was a new one!) over OTA it worked again. Maybe I have really a problem with my internal memory...
I hope I have give you all neede information to analyze my problem and I hope really you can help me. If not then it would be good to know if my handy is dead.
Thanks in advance
Best regards,
mr.mash
mr.mash said:
Hello,
I read a lot of threads but nothing worked and now I just want to now if my handy is dead! I hope you can give me some information. Maybe some solutions.
Here is my actual situation:
On day my handy was turned off. I tried to turn it on but it keeps in a bootloop. Only the first GT-!9100 was seen and it restarts.
I took out the battery and started it again. Then it booted until the message "App 1 of 1 will be optimized". I waited a long time (about 2 hours) and nothing happend. I took out the battery and tried to boot again. Same problem like at the beginning - again bootloop.
Then I tried to get in recovery mode. It worked! I wiped the cache and restartet my handy. But again bootloop. Now I couldn't get into recovery mode. The droid was lying with a red triangle and my handy restartet automatically. So I tried the download mode. It worked! I downloaded from sammobile the actual firmware I9100XWLSD_I9100DBTLS7_DBT. I tried to flash it with odin v3 1.85 over the PDA button. I connected the handy with odin it tells me that he found my handy and I started to flash. It stucks at cache.img. I waited over night. Nothing happend. Still stucking on cache.img. I took my battery out an dwhen I put it back an started may handy I get now the yellow triangle "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
So tried another one with three parts and PIT. In this time with re-partition in odin. But same procedure. I stucked at cache.img.
I still have the yellow triangle and I only can get into download mode.
Then I heard from soft/hard brick problem. I also tried the solution with only flashing the PIT. But no success
So I tried a custom kernel Clockwork Mode Recovery (GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9.tar) to get in recovery mode back. I tried to flash but it stuicks again at "NAND write". I waited again. Nothing happend. So I restarted my handy with tooking out the battery and putting it back again. But in download mode I see that my handy has a custom binary! So it worked. But I can't get into recovery mode of Clockwork
I also tried CF-Root. Here the same problem!
What's wrong with my handy? Is it broken? I've heard maybe I have to re-partition my hand over adb but I found nothing.
One thing is that for half a year I had a problem with my internal SD. It could not mount. After a update of the firmware (luckiely there was a new one!) over OTA it worked again. Maybe I have really a problem with my internal memory...
I hope I have give you all neede information to analyze my problem and I hope really you can help me. If not then it would be good to know if my handy is dead.
Thanks in advance
Best regards,
mr.mash
Click to expand...
Click to collapse
do u have your phone in warranty ?
also as u can get into download mode try flashing kernel stock kernel first then the flash the stock rom (3 way package) .. do not use pit
pit shud b the last option
I can image that the following happened to your phone (not sure, only a guess):
- you were on Android 2.3.x or 4.0.x
- there was on OTA update to 4.0.4 which caused the 'updating Apps' message
- for what reason ever it was not able to update all apps successfully
- you went to recovery and *wiped*!
Being on 4.0.4 this bricked your phone due to the emmc brick bug. After that all flashing / booting / etc. will fail ...
If this is the case, there is not much to do. There is a program and a thread to modify the partition table to make it re-useable, but only in special cases.
Sent from my Nexus 7 using xda app-developers app
Hello,
thanks for your answers.
@neerajganga:
No warranty anymore I tried the stock firmware from sammobile (I9100XWLSD_I9100DBTLS7_DBT) in Odin with PDA. But I get stucked on cache.img. Or is there another stock kernel I can use?
@AndDiSa:
I was on the latest stock firmware 4.1.2.
Do you know where I can find this threat to modify the partition table to make it re-useable?
Thanks
Best regards,
Mike
mr.mash said:
Hello,
thanks for your answers.
@neerajganga:
No warranty anymore I tried the stock firmware from sammobile (I9100XWLSD_I9100DBTLS7_DBT) in Odin with PDA. But I get stucked on cache.img. Or is there another stock kernel I can use?
@AndDiSa:
I was on the latest stock firmware 4.1.2.
Do you know where I can find this threat to modify the partition table to make it re-useable?
Thanks
Best regards,
Mike
Click to expand...
Click to collapse
well 4.1.2 does not have the brick bug
did u try reinstallin the drivers and also use another usb port ?
---------- Post added at 11:55 PM ---------- Previous post was at 11:53 PM ----------
mr.mash said:
Hello,
thanks for your answers.
@neerajganga:
No warranty anymore I tried the stock firmware from sammobile (I9100XWLSD_I9100DBTLS7_DBT) in Odin with PDA. But I get stucked on cache.img. Or is there another stock kernel I can use?
@AndDiSa:
I was on the latest stock firmware 4.1.2.
Do you know where I can find this threat to modify the partition table to make it re-useable?
Thanks
Best regards,
Mike
Click to expand...
Click to collapse
also u mite wanna read this about emmc brick bug
u can find the extended pit for i9100 here
http://forum.xda-developers.com/showthread.php?t=2094564
neerajganga said:
well 4.1.2 does not have the brick bug
did u try reinstallin the drivers and also use another usb port ?
---------- Post added at 11:55 PM ---------- Previous post was at 11:53 PM ----------
also u mite wanna read this about emmc brick bug
u can find the extended pit for i9100 here
http://forum.xda-developers.com/showthread.php?t=2094564
Click to expand...
Click to collapse
Tee thread is http://forum.xda-developers.com/showthread.php?t=1823918, but if you were already on 4.1.2, you should be save. Probably it's something different and I was wrong.
@neerajganga:
I used a different PC with a different version of Windows (WIN7 on the 1st PC and WIN XP on the 2nd one). Same problem. Odin keeps stucking on cache.img :'(
I read the thread of the emmc brick bug but my problem is that for solution one I can't flash Siyeh Kernel 5.0.1 because of stucking with odin.
For the 2nd solution I need to get in recovery mode and this is not possible because of the yellow triangle.
@AndDiSa:
The thread says that it is possible to use the scanner manually in adb. Does it mean I can use it without going into recovery mode? If yes, would it be possible to explain to me how I can do it in few steps?
Thanks.
Best regards,
mr.mash
mr.mash said:
@neerajganga:
I used a different PC with a different version of Windows (WIN7 on the 1st PC and WIN XP on the 2nd one). Same problem. Odin keeps stucking on cache.img :'(
I read the thread of the emmc brick bug but my problem is that for solution one I can't flash Siyeh Kernel 5.0.1 because of stucking with odin.
For the 2nd solution I need to get in recovery mode and this is not possible because of the yellow triangle.
@AndDiSa:
The thread says that it is possible to use the scanner manually in adb. Does it mean I can use it without going into recovery mode? If yes, would it be possible to explain to me how I can do it in few steps?
Thanks.
Best regards,
mr.mash
Click to expand...
Click to collapse
u can still try flashing a kernel
ADB is useable only in recovery mode or on a running system, unfortunately neither of those are working for you currently
Sorry, but currently I don't know what else you could try.
Sent from my Nexus 7 using xda app-developers app
Try to go in recovery mode and format the whole device inside recovery. Try to use odin to flash a recovery if your device doesn't boot in to. If you're successfully then try from there to flash a kernel and a zip from stock rom.
Sent from my GT-I9300 using xda premium
Key word: pit file
Reason for flashing a pit file: unknown
Solution: flash another pit file
Odds: hard brick, mobo change.
Sent from the little guy
@neerajganga:
Which kernel should I try else? I used CF-Root and Siyeh Kernel 5.0.1. Can you give me some more information? Thanks.
@AndDiSa:
Nevermind. Thanks for your help.
@testadeferro
I tried to flash GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9. Odin stucked. After it I tried to get in recovery mode - no chance.
What kind of recovery should i use else?
@gastonw
I tried to flash only the PIT file with re-partition in odin of different threads. Same problem. Odin stucked. And for flashing a PIT for emmc bricks I need to know the brick start and brick end to choose the right one and for this I need to go into recovery mode.
Thanks.
Best regards,
mr.mash
mr.mash said:
@neerajganga:
Which kernel should I try else? I used CF-Root and Siyeh Kernel 5.0.1. Can you give me some more information? Thanks.
@AndDiSa:
Nevermind. Thanks for your help.
@testadeferro
I tried to flash GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9. Odin stucked. After it I tried to get in recovery mode - no chance.
What kind of recovery should i use else?
@gastonw
I tried to flash only the PIT file with re-partition in odin of different threads. Same problem. Odin stucked. And for flashing a PIT for emmc bricks I need to know the brick start and brick end to choose the right one and for this I need to go into recovery mode.
Thanks.
Best regards,
mr.mash
Click to expand...
Click to collapse
were u able to flash siyah kernel successfully ?
Yeah, you need to know what part of your memory is corrupted in order to flash the right pit file. Now tell me something, are you 100% sure your nand was corrupted?
Sent from the little guy
If he gets in download mode isn't time for mobo replacement but for a jtag maybee or riff box.
Sent from my GT-I9300 using xda premium
@mr.mash
try this pit : http://www.mediafire.com/?3nw116ctfd9nqq2
testadeferro said:
If he gets in download mode isn't time for mobo replacement but for a jtag maybee or riff box.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Not just yet.
Sent from the little guy
@mr.mash
also once u done flashing the pit i mentioned above ... flash a stock kernel first .. then flash the entire rom
@neerajganga:
I used CF-Root and Siyeh Kernel 5.0.1. and Odin stucks. The left upper corner says "Kernel" and the green barrel is full but in the message there is no complete or success info. It just freezes. When I turn my handy on I get the yellow triangle and I can't get into recovery mode. When I'm in the download mode it shows me that I have a custom binary. So I think it worked but no boot or recovery mode possible.
No success with the PIT file. I choosed re-partiton and only your PIT file but Odin stucked.
@gastonw:
I don't know it exactly. First there was the bootloop then it wanted to optimize 1 of 1 app. After wipe cache no recovery mode anymore. That's why I tried the custom roms. I just can give you the information what I see in Odin and on my phone.
How can I know that my USB drivers are not working correct. In Odin I get the yellow ID:COM with my COM port shown. I tried now a different PC and there I just installed the USB drivers. No KIES. And still the same problem with my phone.
Maybe I really have to re-partiton my phone but right now I didn't found something to try it out. Maybe you can give me some information about it.
Thanks.
Best regards,
mr.mash
But you did flash a pit file right?
Sent from the little guy
I have tried to install the I9300XXUGMK6_I9300OXAGMK6_OXA rom via Odin 3.09. I correctly placed the four files into the correct panels on odin but when I click on start it does its thing then says locating PIT file and just sits there doing nothing.
There is no PIT file for this rom so what is going wrong.
Anybody got any ideas?????????
Did you get the connected symbol? Diid you tick the repartition box by mistake? Does the phone still boot?
boomboomer said:
Did you get the connected symbol? Diid you tick the repartition box by mistake? Does the phone still boot?
Click to expand...
Click to collapse
Yes it connected, no I didnt tick any boxes.
After a long time with nothing happening I exited Odin and restarted the phone which booted up normally and it still works.
I had previously installed the Ireland 4.3 Rom which went well but it is the rom with all the faults and I am trying to put on the new open Europe 4.3 rom but I keep getting stuck on finding PIT message.
I have successfully used Odin 3.09 on my Galaxy note 8 and I have no problems it works as it is supposed to.
Suggest you carefully read the guide on how to flash back to stock using odin. General forum, sticky threads.
Sent from my GT-I9300 using Tapatalk
I suggest flash back to stock 4.1.2 and then to any new ROM.
Damaged PIT take phone to a service centre or buy a new motherboard.
Solved
JJEgan said:
Damaged PIT take phone to a service centre or buy a new motherboard.
Click to expand...
Click to collapse
I discovered that I did NOT have the usb debugging ticked. Once I did that I could install the rom. Thanks to everyone who helped.