Hello all.
My Xperia X10 Mini Pro is stuck on bootloop as you can see on this video
http://youtu.be/EhaBn0uuSvE
It just got like that from one moment to the other..I was using stock ROM
I tried to flash with Flashtool with these ROMs
U20a_2.1udpt1_Generic
ST17i-Active_4.1.B.0.431-1254-6360_SONY
On the first ROM it gets 100% successfull but still cant boot !
This phone was bought on Portugal, so I dont know if the ROM makes any difference..
Need some advice please !
I've read somewhere that Gordon's Gate (part of Flashtool) can still access a phone even when it bootloops.
Could you document what steps you already took? Perhaps link to the article you followed? (Below is a list of certain steps one usually takes when installing custom ROMS, but they are by no means always necessary, could you perhaps indicate what you already did?)
Rooted Yes/No/Not Sure
ClockWorkMod installed Yes/No/Not Sure
Unlocked bootloader Yes/No/Not Sure
Custom kernel Yes/No/Not Sure
The location of where the phone was bought will not make a lot of difference for the ROM. It might affect things like hardware keyboard layouts, but there are fixes available for those. But things like specific baseband and firmware are still important. By carefully reading the description, you can usually check if your phone can be used.
To be honest, I only have used Flashtool to flash new kernels to my X10 Mini Pro, for just installing another ROM I use ClockWorkMod.
What you can try:
Unbrick through SEUS: here (video)
I've read about people unbricking their devices with PC Companion, here.
If you should be able to regain access to the phone and still want to tinker:
This ROM works nice with the stock kernel
Later, you could unlock the bootloader, flash custom kernels (nAa ICS 04) and install ROMS needing such custom kernels (the U20 ICS ROMS, like MiniCM9)
Should you feel the need to ever unlock the bootloader, use this tool
Cheers and thanks for your post !
I used SEUS and updated to latest firmware but still no success on booting. It stills the same...
Rooted No
ClockWorkMod installed No
Unlocked bootloader No
Custom kernel Not Sure
Any chance that you can point me a stock rom and stock kernel to see if it boots that way?
JotaM07 said:
Cheers and thanks for your post !
I used SEUS and updated to latest firmware but still no success on booting. It stills the same...
Rooted No
ClockWorkMod installed No
Unlocked bootloader No
Custom kernel Not Sure
Any chance that you can point me a stock rom and stock kernel to see if it boots that way?
Click to expand...
Click to collapse
Don't update, repair... leave your phone unplugged when SEUS searches for updates, it can't recognise your phone when it's not connected and will give you a repair option. choose that, and make sure you select your phone from the list presented. it will then flash original kernel and firmware to your phone.
Don't know which kernel you flashed before you got this bootloop, but the second rom you mentioned in your opening post isn't even for your phone, so i guess you got confused with what goes for your phone. You don't even get a kernel logo, so i guess you flashed a kernel for a different model altogether, or your stock kernel got corrupted. a repair should fix it.
I'm now updating on PC Companion like belgianguy said
If unsuccessfull I'll follow your instructions, thanks a lot in advance !
Same on PC Companion..no boot !
SmG67, I dont see any repair option on SEUS. It detects the phone and says thar it's updated. If I remove the battery while is searching my phone it keeps saying that it's updated. What am I doing wrong ?
On PC Companion I got the Repair option, it repaired, but...surprise...still can't boot !
JotaM07 said:
Same on PC Companion..no boot !
SmG67, I dont see any repair option on SEUS. It detects the phone and says thar it's updated. If I remove the battery while is searching my phone it keeps saying that it's updated. What am I doing wrong ?
On PC Companion I got the Repair option, it repaired, but...surprise...still can't boot !
Click to expand...
Click to collapse
That's a shame... because you now have all official sony ericsson firmware on your phone, kernel and rom... If it's still not booting the kernel, there's nothing you can do about it, maybe a repair-shop might be able to fix it.
Well, a repair-shop isnt able to fix it because the mini-usb port has bad contact and they consider this phone out of warranty because of that ! It almost never happens that bad contact..
JotaM07 said:
Well, a repair-shop isnt able to fix it because the mini-usb port has bad contact and they consider this phone out of warranty because of that ! It almost never happens that bad contact..
Click to expand...
Click to collapse
Well if it's that far gone it might very well be a hardware issue. But just to be sure, could you start Flashtool and see if it still recognizes the device (see screenshot of what I see).
If it isn't able to, an older version of s1tool had an IDENTIFY option that required you plug the USB cable into the computer (but not in the phone), to shut down the phone, then push the BACK button and then plug the usb cable into the phone.
The bad contact you mentioned might be causing troubke as well, are you sure it isn't the cable that is at fault? Perhaps try to attach the USB cable in such a way that its not stressed and so that the phone cannot move (to prevent it from disconnecting due to a bad contact). Your flashes very well might have gone faulty because of that. But then again, the SEUS/PC Companion flashes seem to have succeeded, so hopefully Flashtool can shed some light here.
Related
My Xperia X10 is currently not working (see previous thread http://forum.xda-developers.com/showthread.php?t=993785) and I still haven't been able to fix it.
I'm trying to use Flashtool to flash the generic X10 Firmware to my phone although
it's taking up to 4+ hours and then my phone battery dies and the flash is unsuccessful.
Why is Flashtool taking so long to flash a firmware to my X10? I've tried a few different computers and still the same problem.
Please Help. Thank you.
Have you checked, >development >USB debugging in the applications menu?
gogogu said:
Have you checked, >development >USB debugging in the applications menu?
Click to expand...
Click to collapse
I cannot access my phone as of now, it's pretty much a brick. Holding the on button brings only a vibrate and thats it.
what about flashing a rom that you know worked on your phone, making sure you flash the right Baseband for that particular rom first.
EDIT: Sorry just read through you posts and you have probably tried this if you have flashed a rom to it!
gogogu said:
what about flashing a rom that you know worked on your phone, making sure you flash the right Baseband for that particular rom first.
EDIT: Sorry just read through you posts and you have probably tried this if you have flashed a rom to it!
Click to expand...
Click to collapse
Is it possible to turn USB Debugging on without accessing the device??
not assuming you're silly. but you are making sure you have your finger firmly on the back button when you plug in the phone when flashing yeah? the simplest are often the ones that get you.
gogogu said:
not assuming you're silly. but you are making sure you have your finger firmly on the back button when you plug in the phone when flashing yeah? the simplest are often the ones that get you.
Click to expand...
Click to collapse
Yes, It's not that lol. So where do I go from here, my phones pretty much bricked then?
it wont charge via usb or regular charger?
aval1392 said:
it wont charge via usb or regular charger?
Click to expand...
Click to collapse
Read previous thread in original post.
The phone has crashed for some reason whilst using the FreeX10 Beta4 Rom and I cannot access the phone. It charges fine although I cannot turn on/access my phone.
not sure why the flash is taking so long. attempt to flash a different firmware possibly? Also do you have the latest flashtool?
Impossible to brick so you're not out of luck yet. Try flashing with latest flashtool 2.9.1
I'll attempt now with the Flashtool 2.9.1 beta. It's a shame that as soon as they unlock the bootloader my X10 decides to stop working.
EDIT:
'turn on Unknown Sources and Debugging' - It's impossible to access my phone to turn on USB debugging and unknown sources. What do I do now?
bump, anyone??
Attempt repairing your phone via Sony Ericsson Update Service. If that fails put a compatible basebrand and firmware on your phone. Make sure user data is wiped
aval1392 said:
Attempt repairing your phone via Sony Ericsson Update Service. If that fails put a compatible basebrand and firmware on your phone. Make sure user data is wiped
Click to expand...
Click to collapse
Sony Ericsson Update Service does not recognise the product.
Not that I haven't attempted this but I put a compatible baseband and firmware and it took 7 hours in which it only flashed 4 items and then the rest flashed instantly which the phone displays blinking red light.
It's not working. Whats wrong???
Bump for resolution.
foxhound494 said:
Bump for resolution.
Click to expand...
Click to collapse
mine does exactly same as yours, every time is prompt Error Flashing, aborted.....alway stop at kernel.sin or boot.sin
I cannot access my phone as of now, it's pretty much a brick. Holding the on button brings only a vibrate and thats it.
Click to expand...
Click to collapse
Try to use SEUS to repair phone if you can't boot your phone. Do not use PC Companion cause' it will try to detect your phone everytime you use it but your phone can't boot so PC Companion now useless. If you can't repair your phone, you have to bring it to SE service.
Sony Ericsson Update Service does not recognise the product.
Click to expand...
Click to collapse
It will not detect your phone dude. You must select your phone from the list supported. It will tell you to plug your phone in while holding BACK key and after searching for update, you will have a notice about update or repairing.
Gentlemen, I couldn't find a section for Xperia Pro, please excuse me if this is misplaced.
I rooted my MK16i from ICS 4.0. according to a guide here on XDA forum, with no problems (from 4.1.a.435 .. i think).*
Then I installed system tuner and backed up the bloatware and what I believed was obviously named as packages that support them. Things were working great and the phone gained some performance improvements.
UNTIL, I installed Viber and Skype, and niether were working. I thought I would fix it by restoring all the backed up services and apps. Once I did that and rebooted the phone, it became useless
THe phone keeps rebooting. I get to the XPERIA loading screen and then it restarts again
I tried to connect it to the PC to flash another ROM with the Flashtool, but it is not recognized. All I get is in the computer screen a removable disk drive, that is not accessible.
Note: I didnt update the firmware after I rooted.
Can anybody help?
have you worked with flashtool before ? because there hardly could be any wrong with flashtool. use the latest version with proper drivers.
and since you have rooted phone, have you unlocked your bootloader ? if yes, then flash any custom kernel, go to CWM, then place rom zip on sdcard and stright flash rom via CWM.
flashtool should work though. you can try on different computer.
If flashing a kernel or installing custom ROM sounds a bit out-of-reach, you can always go for the repair option in PC Companion. It worked for me when I had soft-bricked my Neo V (it wouldn't go past the SONY logo). However, be advised that this repair option will erase your phone's internal memory. Also, your phone will be brought on the latest stock ROM, so you will need to root your phone again.
Good Luck!!! :good:
acemccloud1 said:
If flashing a kernel or installing custom ROM sounds a bit out-of-reach, you can always go for the repair option in PC Companion. It worked for me when I had soft-bricked my Neo V (it wouldn't go past the SONY logo). However, be advised that this repair option will erase your phone's internal memory. Good Luck!!! :good:
Click to expand...
Click to collapse
I tried to do somethingn like this but sony companion itself cannot detect the phone either.
My question is, is there a brick that cannot be fixed? I took it to a shop today and still they cannot fix it.
Have you tried to use sony update service?
How are you connecting your phone to flashtool?
Can you show us log from flashtool?
New development:
Now I tried to flash the phone with flashtool 32bit rather than 64-bit and it detected the phone! I could even flash the only firmware in Aeonworld's post Here.
Now I can see the phone connected in my computer.
However, the phone still won't boot but when I power on it gives black screen and after a short while, the led on the side becomes green.
For some reason though, I cannot continue with the rooting steps in his guide.
So anyways, after the second reboot, not the first for some reason, the phone gets detected in PC Companion, and I installed the update and now it is working again :victory:
Thank you all for your support.
moeness86 said:
New development:
Now I tried to flash the phone with flashtool 32bit rather than 64-bit and it detected the phone! I could even flash the only firmware in Aeonworld's post Here.
Now I can see the phone connected in my computer.
However, the phone still won't boot but when I power on it gives black screen and after a short while, the led on the side becomes green.
For some reason though, I cannot continue with the rooting steps in his guide.
So anyways, after the second reboot, not the first for some reason, the phone gets detected in PC Companion, and I installed the update and now it is working again :victory:
Thank you all for your support.
Click to expand...
Click to collapse
Good to hear that bro!!! R&D always makes a man better
Murphy's law is with me tonight. Tomorrow, I'm meeting someone who wants to buy my xperia P so tonight I plugged out my sim-card, deleted my stuff on the sd-card and did a factory reset. When I rebooted the device to check if indeed everything was deleted, my pc didn't recognise the device. I tried on an other pc but no reaction. I hear the connecting sound and get a notification on the pc that says "usb device not recognised". I tried installing the drivers via SUS but that didn't change anything. I then tried if my sim-card worked but the device gives a notification: the simcard could not be recognised. My simcard is working correctly as it works in an other cellphone. I then thought I could install titanium backup to search for an old backup but I can't even get the wifi going. I also installed other roms but I can't mount /system. The device I have is rooted and unlocked.
Could you help me solve this issue?
Can't understand the problem exactly, is the device booting? If it is what does it mean you cannot mount system?
You also say you have installed other roms, that require mounting of system.
What FW is installed?
ChikeD said:
Can't understand the problem exactly, is the device booting? If it is what does it mean you cannot mount system?
You also say you have installed other roms, that require mounting of system.
What FW is installed?
Click to expand...
Click to collapse
The device was booting but now it's stuck on the Sony image (before the loading image)
The problem is: the device doesn't recognise any simcard. I can't turn on wifi nor does the pc recognise my phone.
When in CWM (when I try installing a new rom that was already on the phone's sd-card beforehand) I can't mount /system.
I can pick a ftf from my sd-card to install a rom but afterwards the problems stay the same: no sim, no wifi, no usb connection possible.
r3inhout said:
The device was booting but now it's stuck on the Sony image (before the loading image)
The problem is: the device doesn't recognise any simcard. I can't turn on wifi nor does the pc recognise my phone.
When in CWM (when I try installing a new rom that was already on the phone's sd-card beforehand) I can't mount /system.
I can pick a ftf from my sd-card to install a rom but afterwards the problems stay the same: no sim, no wifi, no usb connection possible.
Click to expand...
Click to collapse
Can you enter fastboot or flash mode, and do you have flashtool and firmware to flash?
ChikeD said:
Can you enter fastboot or flash mode, and do you have flashtool and firmware to flash?
Click to expand...
Click to collapse
After a lot of cursing and sweating I managed to get it in fastboot, install an ics ftf and now it's updating via pc companion (wifi and pc connection work as before). The only problem that still exists now is the fact that the device doesn't recognise my sim-card. I checked if I didn't put it in the other way around but it's in the right position. I'm sure the sim works because I tested it in another cellphone.
Thanks a lot for helping me
I have never flashed FW with fastboot only kernels.
Maybe it have flashed, TA partition which is normaly not flashed?
Lets see after the update.
ChikeD said:
I have never flashed FW with fastboot only kernels.
Maybe it have flashed, TA partition which is normaly not flashed?
Lets see after the update.
Click to expand...
Click to collapse
I'm sorry it was in FlashMode The update gives me an error but somehow after I rebooted, the sim is now recognised :s
The only problem now is that I'm stuck in JB but I'm doubting to try anything else.
This cellphone has been nothing but random misery to me for the past 6 months The problem with the randomness is that I can't show it to the service centers (they keep on telling me they can't reproduce the problem).
r3inhout said:
I'm sorry it was in FlashMode The update gives me an error but somehow after I rebooted, the sim is now recognised :s
The only problem now is that I'm stuck in JB but I'm doubting to try anything else.
This cellphone has been nothing but random misery to me for the past 6 months The problem with the randomness is that I can't show it to the service centers (they keep on telling me they can't reproduce the problem).
Click to expand...
Click to collapse
Stuck with JB? You rather ICS?
I have recently uploaded Stock ICS 6.1.1.b.1.75 that I have.
ChikeD said:
Stuck with JB? You rather ICS?
I have recently uploaded Stock ICS 6.1.1.b.1.75 that I have.
Click to expand...
Click to collapse
Yea sorry I meant stuck on ICS. It's 2AM now over here so I'm getting a little bit tired I think I'll be able to find an ftf for JB with the search button tomorrow. Anyway, I thank you for your help I'm glad I found Flash tool to fix my problem.
Hi there, I have a problem. I flashed a ROM and i guess it also flashed a kernel, while im on a locked bootloader... uh oh. The phone can still charge the battery and I get to the SONY logo but nothing after that.
I have tried plugging in a USB cable with VOL - but then windows tells me it cannot recognize the device. I have installed the flashtool drivers and PC companion drivers but no go. Any help would be appreciated.
http://forum.xda-developers.com/showthread.php?t=2775411
Here is a recovery guide
I have tried this method. My problem happens when connecting the device after setting up flashtool. Windows tells me the device could not be recognized (device descriptor request failed), the phone flashes a red led when i plug in the USB cable and then green for a split second right after. then blank nothing, and the error shows up on my desktop.
Mortify1 said:
I have tried this method. My problem happens when connecting the device after setting up flashtool. Windows tells me the device could not be recognized (device descriptor request failed), the phone flashes a red led when i plug in the USB cable and then green for a split second right after. then blank nothing, and the error shows up on my desktop.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2635830
Here is everything you need
I have done all of these steps now and still have the same issue. The drivers installed with no problem when I enabled test signing, but the phone still will not recognize on my computer.
Please join me on https://webchat.freenode.net/ in #xperiaroms maybe we can fix this
Mortify1 said:
I have done all of these steps now and still have the same issue. The drivers installed with no problem when I enabled test signing, but the phone still will not recognize on my computer.
Please join me on https://webchat.freenode.net/ in #xperiaroms maybe we can fix this
Click to expand...
Click to collapse
Im busy right now, try messaging a dev or posting somewhere.
(yay college. Teacher is wondering why im staring at the floor )
Bump. I have a dead phone here, I've tried another computer and I am still getting these errors. I might have to replace the mainboard
we need more info to understand what happened and possible fix... what rom where you using before flash? lb or ub? what rom and kernel did you try to install and how?
ptmaniac said:
we need more info to understand what happened and possible fix... what rom where you using before flash? lb or ub? what rom and kernel did you try to install and how?
Click to expand...
Click to collapse
It's hard to remember, my phone was in for repair for an entire month, but because of one chip on the back plate they deemed the issue a physical problem and didn't cover it under warranty.
I think I was trying to flash back to eXistenz but I believe I flashed a kernel by accident, slip of the hand I guess. I went to restart the phone and it became frozen on the SONY logo. The phone is LB. I just need a fix!
Mortify1 said:
It's hard to remember, my phone was in for repair for an entire month, but because of one chip on the back plate they deemed the issue a physical problem and didn't cover it under warranty.
I think I was trying to flash back to eXistenz but I believe I flashed a kernel by accident, slip of the hand I guess. I went to restart the phone and it became frozen on the SONY logo. The phone is LB. I just need a fix!
Click to expand...
Click to collapse
i think Envious_Data is right, flashing a stock .ftf with flashtool should fix your problems as flashing wrong kernel shouldn't hard-brick your phone, only soft-brick.
But since you can't get your phone properly recognized on the pc you either have a bricked motherboard (i don't think that's the case) or you are having driver issues on the pc (most likely). maybe try flashing on windows xp?
I agree with the above
Hello,
I just jumped on a good deal for Xperia Z5 (E5823) with software issue. Device boots up to the Xperia logo screen and hags there. I am preparing myself for flashing but hoping a simple hard reset might solve the problem. What should my steps be? I already downloaded Flashtool and did some reading on the forum to get myself familiar with the process. Looks like I will need to download FTF file (I am in US, prefer to have unbranded with minimal carrier bloat) and can use your advice on which version/file to start with. Ideally I would want to root as well, but for now more concerned about restoring back to stock. I did read that Lollipop has a better performance, but open to suggestions for whatever is easier/stable. Any guidance/advice is appreciated (with links to tools or downloads if avail). Is there a way to tell what version # along with region/customization I have installed now?! Should I try the Sony Companion software?
For the record, I have successfully flashed custom ROMS on various Samsung/LG devices, as well as Nexus 4/5. Therefore, feel pretty confident this should not be impossible or any harder. Thanks A LOT.
An update after spending few hours yesterday. PC Companion doesn't recognize the phone when attempting to repair (Vol down + insert USB). It did install few drivers when connected to PC, and it looks like the phone does go into flashmode (as indicated by LED staying green). Then tried the Flashtool, created FTF file (based on tutorial at XperiaBlog) and again the same thing, can't get the phone to be recognized in flashmode. It does respond in fastboot mode and able to get some identifying information. I couldn't find any information on how to flash system, kernel, etc through fastboot (was hoping to use the Flashtool FastBoot mode option, but picking corresponding SIN files resulted is fail errors). I am afraid that flashmode might not work for me as the phone might not have USB debugging enabled (not sure what was done to it and who had it prior).
Are the other alternatives/methods I should try? I wish there was a way to send flash commands from ADB command prompt (like with Nexus phones) and from fastboot mode. Any ideas? Really love the phone, though and want to get it repaired to replace my huge LG! Thanks everyone.
coolmen777 said:
An update after spending few hours yesterday. PC Companion doesn't recognize the phone when attempting to repair (Vol down + insert USB). It did install few drivers when connected to PC, and it looks like the phone does go into flashmode (as indicated by LED staying green). Then tried the Flashtool, created FTF file (based on tutorial at XperiaBlog) and again the same thing, can't get the phone to be recognized in flashmode. It does respond in fastboot mode and able to get some identifying information. I couldn't find any information on how to flash system, kernel, etc through fastboot (was hoping to use the Flashtool FastBoot mode option, but picking corresponding SIN files resulted is fail errors). I am afraid that flashmode might not work for me as the phone might not have USB debugging enabled (not sure what was done to it and who had it prior).
Are the other alternatives/methods I should try? I wish there was a way to send flash commands from ADB command prompt (like with Nexus phones) and from fastboot mode. Any ideas? Really love the phone, though and want to get it repaired to replace my huge LG! Thanks everyone.
Click to expand...
Click to collapse
Why couldn't you use adb? I use it to flash the recovery every once in a while, I hate flash tool. It took me a good 4 different PCs before I found one it would work on
civicsr2cool said:
Why couldn't you use adb? I use it to flash the recovery every once in a while, I hate flash tool. It took me a good 4 different PCs before I found one it would work on
Click to expand...
Click to collapse
I gladly would, except that I am not very comfortable using it due to lack of experience and available zips for my Z5 compact. Can you point me to that info and how to make zips to flash and what to start with? I am willing to try it.
Also, how can I check if my boot loader is unlocked? Can't seemed to find a command to use. Thanks again.
Any pointers for zips or how to flash a rom through fastboot? Thanks.
coolmen777 said:
Any pointers for zips or how to flash a rom through fastboot? Thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2277112
We have a couple aosp Roms available to flash, I'd try cm13. I don't know if you've tried to unlock your bootloader yet or not but you should try that. You could also try flashing zombie kernal and see if that'd boot up.
civicsr2cool said:
Why couldn't you use adb? I use it to flash the recovery every once in a while, I hate flash tool. It took me a good 4 different PCs before I found one it would work on
Click to expand...
Click to collapse
civicsr2cool said:
http://forum.xda-developers.com/showthread.php?t=2277112
We have a couple aosp Roms available to flash, I'd try cm13. I don't know if you've tried to unlock your bootloader yet or not but you should try that. You could also try flashing zombie kernal and see if that'd boot up.
Click to expand...
Click to collapse
Thanks for the reply and guidance. I would prefer to stick with Stock Xperia software and launcher. From my experience, CM tends to be buggy and I need full stable functionality with max battery (hoping to give Stamina a test). I am not sure if the bootloader is unlocked and don't want to mess with it unless I absolutely have to (does unlocking BL still messes with DRM keys for camera processing?) Wish I could see if it is unlocked somehow, maybe someone tried to flash/root it and messed up the bootloader somehow.
I will look at zombie kernel (does it need unlocked bootloader or recovery to flash, will it work with stock ROM?) Thanks again for your help.
coolmen777 said:
Thanks for the reply and guidance. I would prefer to stick with Stock Xperia software and launcher. From my experience, CM tends to be buggy and I need full stable functionality with max battery (hoping to give Stamina a test). I am not sure if the bootloader is unlocked and don't want to mess with it unless I absolutely have to (does unlocking BL still messes with DRM keys for camera processing?) Wish I could see if it is unlocked somehow, maybe someone tried to flash/root it and messed up the bootloader somehow.
I will look at zombie kernel (does it need unlocked bootloader or recovery to flash, will it work with stock ROM?) Thanks again for your help.
Click to expand...
Click to collapse
I'm only trying to suggest things that could get the phone working again not permanent solutions lol I don't run cm13 yet as it's definitely not refined. Flashing a stock ftf should be able to bring you to complete original specs without unlocking bootloader or anything.
civicsr2cool said:
I'm only trying to suggest things that could get the phone working again not permanent solutions lol I don't run cm13 yet as it's definitely not refined. Flashing a stock ftf should be able to bring you to complete original specs without unlocking bootloader or anything.
Click to expand...
Click to collapse
Lol, I understand now. It looks like the bootloader might still be locked as I am unable to flash zombie kernel (command: "fastboot flash boot boot.img" results in sending OK, but Failed: remote command not allowed). Looks like I am stuck to trying to unlock a bootloader to keep trying to revive the phone. Just bothers me that I can't get into Flashmode (even after installing drivers that come with Flashtool). Could this be because the phone might not have USB debugging enabled? Is there a way to try to flash the stock through fastboot (as zip) instead of ftf?
My big concern is loosing TA partition and associated DRM keys (any way to back it up from fastboot or toolkit?). Or is that not a factor with the hack available now? Sorry for all these questions, just getting more and more frustrated with this.
coolmen777 said:
Lol, I understand now. It looks like the bootloader might still be locked as I am unable to flash zombie kernel (command: "fastboot flash boot boot.img" results in sending OK, but Failed: remote command not allowed). Looks like I am stuck to trying to unlock a bootloader to keep trying to revive the phone. Just bothers me that I can't get into Flashmode (even after installing drivers that come with Flashtool). Could this be because the phone might not have USB debugging enabled? Is there a way to try to flash the stock through fastboot (as zip) instead of ftf?
My big concern is loosing TA partition and associated DRM keys (any way to back it up from fastboot or toolkit?). Or is that not a factor with the hack available now? Sorry for all these questions, just getting more and more frustrated with this.
Click to expand...
Click to collapse
Come to think of it without getting into the phone to enable unlocking the bootloader I don't think you would even be able to do that. Even if the drivers weren't installed the phone should go into flash mode. I had a hard time with my first attempt with flash tool at getting into flash mode. If you hold power and volume up you should be able to power down the phone completely then hold volume up while plugging in. The problem I had was my PC has a few different USB ports and I was using one that was meant for charging and it wouldn't go into flash mode, tried a different port and it went well after that.
Failed: remote command not allowed ???
This error is because you have not enabled OEM Unlocking from the Developer Option.
If you have enabled it but still receiving the error then you have not unlocked bootloader properly.
There is no need to unlock bootloader for flashing official sony firmwares. It is pretty simple. If you are facing any problems then please feel free to message me.
my email : [email protected]
#coolmen777
Looks like this phone got the dreaded sleep of death bug (won't turn on at all, no matter which combination of buttons I press). Had it on the charger for last 3 days (no led indicators at all and no vibrations), so I got a brick now. Any ideas? This phone should still be under warranty (manufactored week 9 of 2016), but Sony USA refuses to service International phones in their facility. Learned that based on IMEI, this is a Hong Kong version and they want an invoice from authorized dealer for warranty work. Are there are other countries that honor warranty without checking invoice (go by date of manufactoring?) I had Moto and LG repaired before just based on age of phone, no invoice needed. This is my last resort option (to attempt sending in for service).
coolmen777 said:
Looks like this phone got the dreaded sleep of death bug (won't turn on at all, no matter which combination of buttons I press). Had it on the charger for last 3 days (no led indicators at all and no vibrations), so I got a brick now. Any ideas? This phone should still be under warranty (manufactored week 9 of 2016), but Sony USA refuses to service International phones in their facility. Learned that based on IMEI, this is a Hong Kong version and they want an invoice from authorized dealer for warranty work. Are there are other countries that honor warranty without checking invoice (go by date of manufactoring?) I had Moto and LG repaired before just based on age of phone, no invoice needed. This is my last resort option (to attempt sending in for service).
Click to expand...
Click to collapse
search on here for a thread about flashing the wrong ftf onto the phone, I think op used a tablet ftf and had teh same results and had to send to sony
edit:
http://forum.xda-developers.com/z5-compact/help/flashed-wrong-mm-rom-phone-dead-help-t3330929
civicsr2cool said:
search on here for a thread about flashing the wrong ftf onto the phone, I think op used a tablet ftf and had teh same results and had to send to sony
edit:
http://forum.xda-developers.com/z5-compact/help/flashed-wrong-mm-rom-phone-dead-help-t3330929
Click to expand...
Click to collapse
Thanks, not very encouraging given the fact that Sony USA supposedly doesn't currently have a service center to repair international phones (closed their TX center). Are there other countries (Canada or UK) which have less stringent policies of needing invoice (for proof of purchase) and can simply go off of manufacture date from the IMEI or device info? Thanks again.