hello..
i've search thru the forum, and my prob is somehow differ than others..
already unlocked bootloader.. apply custom kernel successfully..
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
still stuck at sony logo.. wait around 1 hour.. nothing happened...
then i remove battery, try to boot into cwm..
success..
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before.. and i restored back..
the ROM i tried is Pureness build 3 and jjHybrid 3.1.. both give same problem..
check screenshot of my system below.. is there's any problem with my system?
or it is related to odex?
so.. got any idea or possible solution?
or my phone problem itself?
thx in advance...
try other kernel...
1. Pureness build 3 ,Kernel :Night Elfs ICS Kernel mod
2. jjHybrid 3.1,Kernel Use any of Following
a) STOCK Kernel (No OverClocking)
b) shardul_seth Kernel
c) Night-Elf Kernel
d) Adridu kernel
look at specific thread,you will find the answer.
dualsh0ck said:
hello..
i've search thru the forum, and my prob is somehow differ than others..
already unlocked bootloader.. apply custom kernel successfully..
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
still stuck at sony logo.. wait around 1 hour.. nothing happened...
then i remove battery, try to boot into cwm..
success..
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before.. and i restored back..
the ROM i tried is Pureness build 3 and jjHybrid 3.1.. both give same problem..
check screenshot of my system below.. is there's any problem with my system?
or it is related to odex?
so.. got any idea or possible solution?
or my phone problem itself?
thx in advance...
Click to expand...
Click to collapse
I see that you are not wiping/formatting your data.. Wiping data is essential when installing a custom ROMs or switching ROMs..
Before wiping cache, format your data first!
iamdchosen1 said:
I see that you are not wiping/formatting your data.. Wiping data is essential when installing a custom ROMs or switching ROMs..
Before wiping cache, format your data first!
Click to expand...
Click to collapse
it is not enough to wipe cache, dalvik-cache, battery stat etc? becoz i already done all that through CWM.
and a noob question, how to properly format the data? phone data or sdcard data?
megatpanji said:
try other kernel...
1. Pureness build 3 ,Kernel :Night Elfs ICS Kernel mod
2. jjHybrid 3.1,Kernel Use any of Following
a) STOCK Kernel (No OverClocking)
b) shardul_seth Kernel
c) Night-Elf Kernel
d) Adridu kernel
look at specific thread,you will find the answer.
Click to expand...
Click to collapse
thx but problem above already appeared when i tried to flash pureness build 3 ROM on night-elf kernel..
dualsh0ck said:
it is not enough to wipe cache, dalvik-cache, battery stat etc? becoz i already done all that through CWM.
and a noob question, how to properly format the data? phone data or sdcard data?
Click to expand...
Click to collapse
The data has to be wiped when you install a custom ROM.. Since some of the data can cause troubles to the new ROM you have installed..
I advice you to do the following when installing a ROM.. Follow step by step..
- Flash the kernel first
- Boot into CWM mode by pressing 'volume down'
- wipe data/factory reset
- wipe cache partition
- wipe dalvik cache
- install custom zip from sd card i.e your custom ROM zip file
- reboot now
there you go now!
PS. Data formatting has to be done in CWM mode and it will not erase your sd data! So relax!
Also, press 'Thanks' if I helped you!
CHEERS!
iamdchosen1 said:
The data has to be wiped when you install a custom ROM.. Since some of the data can cause troubles to the new ROM you have installed..
I advice you to do the following when installing a ROM.. Follow step by step..
- Flash the kernel first
- Boot into CWM mode by pressing 'volume down'
- wipe data/factory reset
- wipe cache partition
- wipe dalvik cache
- install custom zip from sd card i.e your custom ROM zip file
- reboot now
there you go now!
PS. Data formatting has to be done in CWM mode and it will not erase your sd data! So relax!
Also, press 'Thanks' if I helped you!
CHEERS!
Click to expand...
Click to collapse
according to my first post. here
dualsh0ck said:
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
Click to expand...
Click to collapse
i've already done all wiping in CWM. but still stuck at sony logo.maybe i'll try some other kernel for jjhybrid3.1
Did you tried what I said?
Sent from my MT11i using xda premium
iamdchosen1 said:
Did you tried what I said?
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
one thing.. if i already used custom kernel and i want to change to another custom kernel.. can i just flash new custom kernel on the old custom kernel?
i have suave kernel now.. and i want to change to alliance kernel..
dualsh0ck said:
one thing.. if i already used custom kernel and i want to change to another custom kernel.. can i just flash new custom kernel on the old custom kernel?
Click to expand...
Click to collapse
Yes.
after flashing Alliance1.4 kernel.. my phone got error message "com.android.phone has stopped". what happened?
as before, i just reflash to stock fw.. or there is another solution?
dualsh0ck said:
after flashing Alliance1.4 kernel.. my phone got error message "com.android.phone has stopped". what happened?
as before, i just reflash to stock fw.. or there is another solution?
Click to expand...
Click to collapse
I don't know why you're getting so much errors?!
I flashed everything on one go and all were just fine to work!
Please tell me your exact process of doing all this?
iamdchosen1 said:
I don't know why you're getting so much errors?!
I flashed everything on one go and all were just fine to work!
Please tell me your exact process of doing all this?
Click to expand...
Click to collapse
before this with alliance1.1 and suave6 kernel work with no probs.
must i tell this in every reply?
this is the exact step doing all of this..
flash kernel via fastboot thru command prompt window..
and flash rom thru cwm with this step..
- reboot into recovery [power button then repeatedly press volume up]
- [wipe data/factory reset,cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
and chill bro. i have problem here, and i ask about it because i dont know what to do.
and fastboot folder must placed in android-sdk folders or it is not necessary?
bump
Are you sure the kernels are compatible with the custom ROM you are using? Usually the developer suggests some ROMs. Also, you might need a different baseband for the kernels you are using. Which ROM are you using? Some have extra steps you have to perform.
Sent from my MT11i using xda app-developers app
Only boot.img has to be placed in android sdk folder.
Sent from my MT11i using xda app-developers app
Sorry I'm not awake today. Boot.img must be in android sdk and only the fastboot.exe file. I doubt it's got anything to do with that though, if you can successfully flash kernels.
Sent from my MT11i using xda app-developers app
Vampirmaniac said:
Are you sure the kernels are compatible with the custom ROM you are using? Usually the developer suggests some ROMs. Also, you might need a different baseband for the kernels you are using. Which ROM are you using? Some have extra steps you have to perform.
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
yup i'm sure.. because i want to flash night-elf kernel + jjhybrid3.1 rom..
as for now i use stock rom because can't successfully flash any custom rom..
my baseband 8x55A-AAABQOAZM-203028G-72.. it is also related?
HEY EVEN I HAD THE SAME SAME PROBLEM BEFORE...its was that i followed all the steps n still was stuck at bootlogo
even if i tried to go to recovery n flash the rom again , it simply said CANNOT MOUNT SD CARD.
So I tried to format my sd card using SDFORMATTER 3.1 and flashed the om again and :laugh: it WORKED
SO BASICALLY TRY TO FORMAT THE SD CARD USING SD FORMATTER software and not the windows default one.
IT WORKED FOR ME AND HOPE IT WILL FOR YOU ALSO
SD CARD FORMATTER 3.1 link google it
hey guys... really need help here...
i just successful UNLOCKED Bootloader,CWM and install custom kernel..
After fastboot the custom kernel (suave) then enter the CWM to flash custom ROM(Xperia_Ice_Cream_Pureness_build_6.00_NeoV)... wipe all data and other common step.. then i reboot the system
My phone get boot loop after that. So i remove the battery then enter the CWM again.. but the colour change to red and detect my phone as "xperia ARC".. plzzz.. i really stuck here
Related
Hey, I hope I can get some help here. I'm a total noob and I don't know if other similar threads apply to me. Anyway, I have a rooted Xperia Neo V, with ICS 4.0.3 and I used ROM Manager app to casually flash the "Xperia Pureness" ROM I downloaded. I didn't do a full wipe because I was too stupid to look at the instructions. Is this fixable?
download this kernel http://forum.xda-developers.com/showthread.php?t=1566871
read this how to how to install kernel...
http://forum.xda-developers.com/showthread.php?t=1409269
if u do not get it post your queries
Xperia Neo V stuck at SONY logo
hey i also have the same problem. I forgot to wipe dalvik cache. Stuck at SONY logo. I havent unlocked my bootloader , so can i flash kernel mention in the above post.
skral said:
hey i also have the same problem. I forgot to wipe dalvik cache. Stuck at SONY logo. I havent unlocked my bootloader , so can i flash kernel mention in the above post.
Click to expand...
Click to collapse
you can install roms that can be installed on unlocked bootloaders....read this http://forum.xda-developers.com/showthread.php?t=1313445
can you get into CWM ??
samneov said:
download this kernel http://forum.xda-developers.com/showthread.php?t=1566871
read this how to how to install kernel...
http://forum.xda-developers.com/showthread.php?t=1409269
if u do not get it post your queries
Click to expand...
Click to collapse
Thank you. At some point the instructions require that I enter *#06# on my phone but I can't boot, it gets stuck at the Sony logo. Is this step necessary?
as can be interpreted u have a unlocked bootloader( i guess that's right)
you can try to use Sony Ericssion Update service to restore your phone to ICS
read this 1. http://communities-origin.sonyericsson.com/message/176189
and this 2.http://talk.sonymobile.com/thread/30938
see if it helps
I used SEUS to install stock rom . Now its working but all apps are gone.
so i can install any custom rom? Also did this happen because i didnt wipe dalvik cache bfore installing the rom.
samneov said:
you can install roms that can be installed on unlocked bootloaders....read this http://forum.xda-developers.com/showthread.php?t=1313445
can you get into CWM ??
Click to expand...
Click to collapse
skral said:
I used SEUS to install stock rom . Now its working but all apps are gone.
so i can install any custom rom? Also did this happen because i didnt wipe dalvik cache bfore installing the rom.
Click to expand...
Click to collapse
Ya ..you can install custom ROMS now i hope u hv boot loader unlocked ..head over to the Neov development section and download the ROM you want ..Follow the instructions really carefully while installing ROMS
And the answer of your second question is NO. When installing stock ROM or repairing it all apps and setting are gone nothing to do with wipe dalvik cache
Problem persists
So i tried installing pureness once more, this time i made sure i wiped davik cache. Same problem stuck at SONY and so had to revert to stock once more. I havent unlocked BL yet. Is it necessary for installing Pureness. Also can somebody tell me if i am doing it right.
1) used flash tool to downgrade to .562
2)rooted using Doomlords tool
3)Used flash tool to upgrade back to .431
4)Installed cwm auto installer apk from google play
5)Installed cwm
6)Booted into recovery
7)Made a backup
8)Used install from zip option to install Pureness
9) reboot and its stuck
Cant even access cwm since its stuck at that point , so i cant use the backup also right.
First, flash a specific kernel for that ROM.. Look for the link for kernels in the above post!
Flash the kernel first.. Reboot into recovery... Wipe data, wipe cache partition, wipe dalvik cache... And then install zip from sd card!
Reboot your phone! You'll be done now!
flashing kernel
I am guessing for flashing the kernel , i have to unlock bootloader.
You didn't unlock your bootloader?!
You definitely can't flash a custom kernel without unlocking it!
I suggest you go with the official Sony's way..
http://unlockbootloader.sonymobile.com/
BL
but that will void my warranty right and i will no longer be able to use SEUS for reveting to stock.
Yea.. That would void your warranty!
But unlocking the bootloader will allow to install custom ROMs which shall be very fast and smooth as compared to the stock one... and I don't think you'll revert back to stock!
Though relocking can be done but you won't be able to update your phone through over the air updates!
It's your choice!
1. Unlock bootloader using sony's,
Method
2. Flash the custom kernel
3. Get into CWM
4.wipe delvic/data/battery stat
5. Install custom rom
6. Install gapps(if necessary)
7.wipe delvic
8. Reboot
That are common steps
Also use the recommended kernel by the developer
Also follow his instruction...if in doubt serch if still confused post here
Sent from my MT11i using xda app-developers app
Mods ftw
I dont want to unlock bootloader now. Presently having fun with different mods . Once i get tired of them , will try unlocking. Please suggest some useful mods.Currently installed Romcontrol by jjdoctor and walkman for ICS by thilinac.
SAMPLE TUTORIAL
I-SCREAM-11i + Night-Elf kernel RC5 tutorial
================================================== =========
requirement: unlock bootloader
================================================== =========
download I-Scream_official_431.zip [copy to sd card]
download I-Scream_official_431_update.zip [copy to sd card]
download I-Scream_restore_vdd_level.zip [copy to sd card]
download FASTBOOT [extract to PC]
download kernel [boot_ics_v1_rc5.img]
copy/paste it to fastboot folder
rename it to boot.img
open cmd window(by pressing shift+right click mouse & open command window)
turn off phone,connect phone to pc by pressing settings button (now led will turn on will lit blue) [PdaNetA350x64 for 64BIT OS driver]
paste this in cmd - fastboot flash boot boot.img
press enter
================================================== ======================================
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache]
- install zip from sdcard I-Scream_official_431.zip
- install zip from sdcard I-Scream_restore_vdd_level.zip
- reboot into system
LED Flash not working
I was trying out some of the mods (ROM Contol and Walkman music for ICS) and now the LED flash is not working and camera image is upside down. Any idea why?
skral said:
but that will void my warranty right and i will no longer be able to use SEUS for reveting to stock.
Click to expand...
Click to collapse
even if u unlock u r boot loader you would be able to use SEUS....i did so when my phone simple stopped responding after flashing certain kernel
skral said:
I was trying out some of the mods (ROM Contol and Walkman music for ICS) and now the LED flash is not working and camera image is upside down. Any idea why?
Click to expand...
Click to collapse
please read the related threads carefully ....use search.....usually there is a solution given.....else it is a bug which will be fixed in the next release....do a little digging:laugh:
basically i have the same problem.. (neo)
already unlocked bootloader.. apply nightelf kernel successfully..
step i do:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache]
- install zip from sdcard Xperia_Ice_Cream_Pureness_build_3_NeoV.zip
- install zip from sdcard Neo_patch_for_Xperia_Pureness_build_3.zip
- reboot into system
still stuck at sony logo.. then i remove battery, try to boot into cwm..
it still works!
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before..
so.. got any idea or solution? thx in advance...
I tried intalling the xtxperience_2 rom but it gets stuck on the sony logo:crying:...pls help me install the rom
Wipe dalvik cache.
thanks a lot but which kernel should i use?
for now i am using advanced recovery kernel
tried bt its not working:crying:
karanh94 said:
tried bt its not working:crying:
Click to expand...
Click to collapse
Have a fresh install of Stock ROM .50 first (via flashtool), to sort things out. Then flash via fastboot XSX Kernel (v5, this is my current Kernel) by Mericon, or XSspeed Kernel v6 by Krabapel, to easily gain CWM. Reboot your phone, then when logo appears (they have different logos), press volume up once, you will enter in CWM. Before flashing, Then you can flash XTXperience ROM. After Flashing ROM wipe Dalvik Cache.
karanh94 said:
tried bt its not working:crying:
Click to expand...
Click to collapse
I had the same problem, you need to make sure you go into mounts and storage menu in cwm before you flash the rom, and format system, maybe data also.
Hit thanks if I helped.
Cheers,
Lunar.
Sent from my LT26i using xda app-developers app
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
have you checked md5sum: e9c809385764bc6083616ce8cd5b0f36?
once downloaded, it should have the same md5..
wow.. size: 150.21mb? that's pretty lite
Tequila6808 said:
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
Click to expand...
Click to collapse
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
thats not a rom ma8, but a kernel to root ur phone first, so that u can install any custom rom of ur choice
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
You know, after flashing a new rom booting may take some more time, at least a few minutes. Have you been waiting enough time?
First, check md5sum of ROM [what Saywhatt wrote a few posts back]
a. If you are no longer in recovery modes then you can get a kernel [tar file] Flashing with Odin.
If your phone then starts normally, then flash the ROM you want through CWM.
*** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
b. If you can get into recovery mode, not flash with Odin, but do these same steps;
**** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
PS. If it fails in step a first flash stock ROM with Odin
sorry for my bad english
saywhatt said:
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
Click to expand...
Click to collapse
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
andyzeng1993 said:
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
Click to expand...
Click to collapse
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
I flashed this
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x).
Hawker's GS2Wiper download."
Under this link " http://androidforums.com/galaxy-s2-...804-dorimanx-kernel-ics-jb-dummies-guide.html "
andyzeng1993 said:
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Click to expand...
Click to collapse
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Tequila6808 said:
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Click to expand...
Click to collapse
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
andyzeng1993 said:
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
Click to expand...
Click to collapse
Reflash Rom without wipe and wipe cache.Or try another Rom.
Tequila6808 said:
Reflash Rom without wipe and wipe cache.Or try another Rom.
Click to expand...
Click to collapse
any rom you suggest?
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
Yeah stock 4.0.3 and leave it at that.
I dont think you are cut out for all this modding
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1569686
Hi guys, you can tell me how to install this rom? http://forum.xda-developers.com/showthread.php?t=2012666
What kernel should I use for better results?
I think like any other rom...
Put it into your sd-card, reboot to CWM and do the wipes(Factory reset, wipe cache, wipe dalvik cache, format system) and the install the .zip
But first of all you should flash the kernel which is given in the download(together with the rom)
AW: [Q] How to install this rom? xD
I think he better should not format system
Just wipe data/factory reset, wipe cache and advanced -> wipe dalvik cache!
Sent from my Nexus 7 running Android 4.2.1
I'm doing it everytime I flash a new rom
Nothing wrent wrong :fingers-crossed:
Any ICS kernel is compatible. I strongly recommend MESA Hybrid v3.5 or LuPuS v3. I also recommend to format system before flashing new ROM. I've done it over 100 times safely. You'll avoid a lot of problems.
malte180684 said:
I'm doing it everytime I flash a new rom
Nothing wrent wrong :fingers-crossed:
Click to expand...
Click to collapse
I think he should first do it without wiping system and incase it was required and he stuck in a bootloop, then he can simply do the process again with wiping system
Press THANKS if I helped,
Regards,
AJ
I tried the rom(with rage kernel 3.2), and always go in bootloop
make sure u already have ur ROM on sdcard and the others (wifi-fix.zip or whatever)
on CMW, u can safely wipe /system when u wanna flash new ROM, but REMEMBER not to reboot your phone AFTER u wipe /system. if u do this, u will see "new boot kernel animation" a.k.a BOOTLOOP.
after wipe /system,/cache,/dalvik,/data,/sd-ext then next thing is install ur ROM.
if u using TWRP, its not necessary to wipe /system bcoz TWRP will wiping /system by itself when u install new ROM.
yes, i sent from my phone using Xda Premium, so what?
Click to expand...
Click to collapse
HELP needed ..!!
okay, so i followed this steps ( http://www.youtube.com/watch?v=7tgmmQgRrZw ) to unlock bootloader of my wt19i .. did it as it is shown .. now my phone is stuck in the logo sign when i'm trying to turn it on !! need help asap.
prds359 said:
HELP needed ..!!
okay, so i followed this steps ( http://www.youtube.com/watch?v=7tgmmQgRrZw ) to unlock bootloader of my wt19i .. did it as it is shown .. now my phone is stuck in the logo sign when i'm trying to turn it on !! need help asap.
Click to expand...
Click to collapse
Okay so here's a solution
1. Download flashtool first from here
2. Download ICS stock ftf from here
3. Now flash the ftf to your phone in FlashMode, when connected to PC
if any further query, let me know
Happy Flashing
thank u so much @Sangeet007 .. solved my purpose
Having another problem ..
didn't want to create another thread for this ..
so continuing here ..
Rooted completely & unlocked boot-loader of my wt19i ..
but CM 9.1 isn't installing ..
trying to flash it from CWM & it's showing
"E: Error in/sdcard/cm-9.1.0-coconut.zip
(Status 7) Installation aborted."
help needed ASAP ..
seems like if we don't create new thread, no one's going to notice !!!! :'(
HELP needed here ! please .!
Download the rom again and transfer it to your phone. Flash the kernel from inside the rom.zip, then flash the rom after performing wipe data/factory reset and wipe cache
Sent from my Nexus 4 running Android 4.3
facing the same problem! can it be done with any software like flashtool or such?
prds359 said:
facing the same problem! can it be done with any software like flashtool or such?
Click to expand...
Click to collapse
No, you have to flash it using cwm
Could it be you wiped /system before flashing? Because you shouldn't do that!
So there's the problem !!!
what i did -
wiped data/ factory reset
wiped cache partition
wiped dalvik cache ..
Solution please
prds359 said:
So there's the problem !!!
what i did -
wiped data/ factory reset
wiped cache partition
wiped dalvik cache ..
Solution please
Click to expand...
Click to collapse
After wiping delvic cache did u frmat the system ,data ,cache which located in the advanced tab ???
can u gve me the link that the rom ur trying to install??
*first flash the recommended kernal
*Wipe Data/Factory Reset
*Wipe Cache Partition
*Wipe Dalvik Cache
*Go to Mounts & Storage
*Format Data
*Format Cache
*Format System
*Install zip from sd card
**if isnt work this again please try to install anyother rom and see what happen ...
downloaded the file from the official site ( http://download.cyanogenmod.com/?device=coconut&type=stable )
1. no i didn't format the system after wiping dalvik cache.
2. from where & how do i flash the kernel? i have downloaded the ROM & the Gapps.!
prds359 said:
downloaded the file from the official site ( http://download.cyanogenmod.com/?device=coconut&type=stable )
1. no i didn't format the system after wiping dalvik cache.
2. from where & how do i flash the kernel? i have downloaded the ROM & the Gapps.!
Click to expand...
Click to collapse
The kernel is the boot.img inside the zip. If you want to know how to flash it, check my guide on how to install a custom rom/kernel
And you could do the following:
1. Open the zip
2. Go to META-INF/com/google/android/
3. Open the updater-script using notepad ++
4. Delete the first 3 lines saying "assert getprop"
5. Save it and repack the zip
6. Flash it
Maybe it works then! :good:
mihahn said:
The kernel is the boot.img inside the zip. If you want to know how to flash it, check my guide on how to install a custom rom/kernel
And you could do the following:
1. Open the zip
2. Go to META-INF/com/google/android/
3. Open the updater-script using notepad ++
4. Delete the first 3 lines saying "assert getprop"
5. Save it and repack the zip
6. Flash it
Maybe it works then! :good:
Click to expand...
Click to collapse
did exactly what was described to your link to flash the kernel ..
it was successful.. but my phone is stuck to the Logo when am trying to turn it on ..
another problem is, in CWM menu the back key (power button) isn't working at all ..
what should i do next?
have attached the error screen.
Then flash a another kernal ,stuck on the logo happens coz the flashed kernal didnt support very well for ur android version.
Sent from my WT19i using xda premium
can you please suggest me a good ROM & kernel for WT19i please?
i was trying CM 9.1
Kernal-rege,kappa,lupus
Rom-honami i1,flawless ICS,next gen 7rom
Sent from my WT19i using xda premium
Arrow11 said:
Kernal-rege,kappa,lupus
Rom-honami i1,flawless ICS,next gen 7rom
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
okay so i flashed this ( http://forum.xda-developers.com/showthread.php?t=2167119 ) kernal ..
phone still won't work after logo sign ..
and am unable to access phone's memory card. ..
pc is't detecting it anymore!
what to do now?
prds359 said:
okay so i flashed this ( http://forum.xda-developers.com/showthread.php?t=2167119 ) kernal ..
phone still won't work after logo sign ..
and am unable to access phone's memory card. ..
pc is't detecting it anymore!
what to do now?
Click to expand...
Click to collapse
when sony logo appears plz start to press vol- rapidly..u can acces to recovery there..in there u can mount ur sd card using mount and storage option .if u cant acces to recovery u should flash this kernal http://forum.xda-developers.com/showthread.php?t=1398910
i recovered most of 4ns using rege kernal
no progress with rage kernal too! stuck to logo sign.
phone was running well before flashing any kernal.
is there any way to take it back to that position again?
**phone is rooted & boot-loader is unlocked.
prds359 said:
no progress with rage kernal too! stuck to logo sign.
phone was running well before flashing any kernal.
is there any way to take it back to that position again?
**phone is rooted & boot-loader is unlocked.
Click to expand...
Click to collapse
Flash the stock rom in flashmode using flashtool. If you don't know how to do that, use the search
Sent from my Nexus 4 running Android 4.3