I can see the screens but it constantly flashes & isn't always responsive. When it updated I saw it update all my apps then I think it rebooted (I have kids so i was distracted). If it sits it will dim then go black screen, then brightens back up, Kies will connect to it for several seconds then loses connection. What can I do?
Factory reset? I do that by powering off then holding in up volume button and the power button at the same time correct?
looks like the factory reset fixed issue
Related
I'm puzzled by this as I unplugged it in the morning, drove to work, and sat down in my office to discover the phone is unresponsive to everything when it was working just fine 15 minutes before that. I don't want to do a battery pull just yet. All the buttons are unresponsive and when I plug it into a computer the screen usually goes to the lockscreen but it did not and it wasn't recognized by computer. It did not have a security screen lock active and I have not updated p-rom or any firmwares in the past few weeks. OTA updates were deactivated prior to my last p-rom update. Does anybody have any insight to this? Rooted 1.8.3 gladiatrix 3 b0.2.
Battery pull, and hope that fixes it. Usually the red blinky light means something made the e-fuse mad, and so now it's trying to revert your phone back to factory settings (at least that's what I've seen in the past)
If a battery pull doesn't fix it, reboot while holding the volume down button. When it shows fast boot, press down until you get to android recovery. Press the volume up key, and when you see the android with in the triangle, tap above the search button (sometimes I have to tap it like 20 times before the menu appears), then select wipe data. That will wipe your phone, but should get it back working.
May be soft conflict, i got 02 times. It happens when i ran many apps.
Sent from my MB860 using XDA App
In my experiencemit was just 2.2. Flashing 2.3.4 fixed it for me
Stock
It stays on a black screen unless i plug the charger in. I can then operate it for a while. But then all the sudden a message permanently stays on the screen saying "to restart your phone, press and hold the power button and volume up button for 10 seconds". also after this message appears the home button reacts by taking a screen shot (weird).
I have tried rebooting it and updating PRL check for software updates. Don't know what i should do.
I can't even boot into stock recovery because it won't power down it will just reboot. So i can't turn the phone completely off.
Anything i can try?
Try pushing your power button rapidly many times. It is probably stuck you may feel it... This has happened to me a couple of times. Maybe try some compressed air around it.
Ahhhh... Max Venom injection! Much better now...
It all started 2 days ago, when watching a clash of clans replay the screen turned off for the energy saving thing. I pressed the power button to bring it back, but the screen didn't turn on, i could hear the game sounds, and the touch screen was working, after the replay ended i was able to tab the buildings in my village and hear the sound they make. I pressed some random combination of buttons, i think its power+volume down and the screen turned on. It happened a second time during that day, and i was able to turn the screen on again. But the day after that trick didn't work and the tablet was stuck with a black screen.
I tried a factory reset, but the menu for it wouldn't appear, the odin menu by the other hand worked fine. The recovery menu should appear when with the tablet turned off you press volume up + home + power in that sequence, and releasing the power button at the samsung logo screen. But the menu never appeared, so i navigated it blindly and i think i managed to reset it, at the next accension i was prompted with the personal information field, name, google account, time settings etc..
The phone started again, with all default settings, and all my files where gone (so im assuming the factory reset worked) but when the screen turns off it doesn't come back by pressing the power button, it comes after trying a few combinations (and again i think it is power + volume down and wait a few seconds).
So im worried it was all in vain, also the screen brightness is bugged, and changes the colors, the become reddish with low brightness and some colors disappear.
Edit: After i let the screen turn off for the third time today, it doesn't come back on. So im back at the black screen...
I have never used any modifications of software. Only used stock firmware.
My coffee was spilled a little on device. Cleaned it immediately.
Then I got a freeze after boot up. I could see the home screen, but touch screen not responding, "Menu" and "Return" lights continuously lit and not responding. The removal of battery or long press of ON/OFF button was the only method to turn off. But the battery % shown on screen was correct each time. If I called the device, it was offline.
I connected the phone to my computer and it was recognized by windows. I did not transfer any files to phone by odin, but I have Odin application.
I used 3 button combinations to wipe cache, then boot up, but no change.
Then I used 3 button combinations again to return to factory settings and wiping everything. Now I get a solid screen where I need to select language but the menu and return lights a on continuously, and the touch screen does not respond.
So far, I can see that my three hardware buttons, on/off, volume, home buttons are working. Phone also was returned to factory defaults. But the problems continue to be the same. They are: no touch screen reaction, continuously lit menu and return buttons, home (OK) switch not working after boot up.
I have started to think that there might be a hardware problem. I have downloaded the service manual, can solder things, even have a microscope if needed.
Can somebody guide me to check where is the problem please?
After splash screen, screen blank but phone sinks with BT & capacitive lights active
Today I tried to update my phone to the newest firmware (I think it was .210, but I know it was from August 5th on firmware finder...I know its a long time to wait to update, but I started a new job, moved to a new city, etc. so things have been super crazy). Unfortunately, after flashing with EMUI Flasher, the phone rebooted and then got an update failure. I restarted the phone and waited but the screen was black. However, my smart band paired and if I press the power button, the capacitive button lights turn on, but the screen is blank/black. I have tried rebooting, both regularly holding power for 20 seconds as well as holding the power key with volume up and then volume down. I can reboot into a recovery of sorts and tried to wipe cache and restart, as well as boot into safe mode, but both result in the black screen from before. I can also boot into fastboot, but don't know what I could do to fix this.
Any advice as to how I can save my phone would be really appreciated. I'm really hoping I don't have to wipe the phone.
Please help me!