Hi all,
I bought my Galaxy Ace S5830i last month. I hadn't installed Samsung Kies until yesterday, when I launched it it prompted a firmware upgrade. First I tried to use kies to upgrade but whenever the upgrade process started (Kies started downloading the firmware files) my device automatically got disconnected..I tried reinstalling kies, restarting my phone but nothing worked.
I then decided to use odin(v1.87) to flash the firmware on my device but it kept failing at first step itself. Here's what it said :-
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLF3_S5830iODDLF1_RST_S5830iDDLF1_HOME.tar. md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> sbl.bin
<ID:0/010> NAND Write Start!!
<ID:0/010> BcmCP.img
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am at my wits end now so can anyone please help me sort out this problem?
Thanx in advance
PS: The phone has been working as fine as ever. Kies never got to the step of INSTALLING the new firmware as whenever it started downloading the firmware files my phone got disconnected so no damage there.
With ODIN I entered download mode but here too it fails at the beginning, so I just switch off my phone and restart it and it works as if nothing ever happened (I've made several attempts)
i have same problem
Related
Hi to all! First of all, I am sorry if I put my problem in wrong forum. I'm new here...
I was trying to install Android Jelly Bean 4.2.2 firmware (I9105PXXUBMI3_I9105POXXBMJ1_I9105PXXUBMI1_HOME.tar.md5) on my Galaxy SII Plus via Odin_v3.09. Unfortunately, I put firmware file in field BL (in previous versions of Odin it was Bootloader) instead of AP. Odin finishes with status FAIL. Complete log is below:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9105PXXUBMI3_I9105POXXBMJ1_I9105PXXUBMI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> vc-firmware.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After that, phone is stuck in Download mode. I can't restart it, turn it off or boot it in recovery mode. All I can do is to boot it in download mode again or I get message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" (which, by the way, doesn't work because it Kies cannot see the phone in this state).
Any help would be much appreciated! Thanks guys!
Hello,
My wife has this phone and the phone accidentaly turned off and after that he was not able to boot. It was stucked on samsung logo. I tryied recovery mode and wipe phone, but it not helped. After that phone started stucking on galaxy S2 logo (before samsung logo). I was able only to go into download mode. I tried to follow this guide: wccftech.com/install-latest-android-412-jelly-bean-galaxy-s2-i9100-official-firmware but in odin (v3.07) it failed after some time (while progress bar is not moving from beginning, I see only one px of it). And now phone is showing message: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.". Please can you help me how can I recover phone back? thanks a lot for any help
it is czech version bought in samsung shop. So I downloaded XEZ-I9100XWLSD-20130301125313 (but I am not totaly sure about version, this should be for czech)
On load PDA
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100XEZLS1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
After press Start
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> cache.img
After some time
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
dawee said:
Hello,
My wife has this phone and the phone accidentaly turned off and after that he was not able to boot. It was stucked on samsung logo. I tryied recovery mode and wipe phone, but it not helped. After that phone started stucking on galaxy S2 logo (before samsung logo). I was able only to go into download mode. I tried to follow this guide: wccftech.com/install-latest-android-412-jelly-bean-galaxy-s2-i9100-official-firmware but in odin (v3.07) it failed after some time (while progress bar is not moving from beginning, I see only one px of it). And now phone is showing message: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.". Please can you help me how can I recover phone back? thanks a lot for any help
it is czech version bought in samsung shop. So I downloaded XEZ-I9100XWLSD-20130301125313 (but I am not totaly sure about version, this should be for czech)
On load PDA
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100XEZLS1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
After press Start
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> cache.img
After some time
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Seems like you have brick bug but I have no idea how to fix it.
Next I have tried to follow this guide: http://forum.xda-developers.com/galaxy-s2/help/guide-fix-unflashable-soft-bricked-gsii-t1457458
I am not totaly sure about kernel version, but because this phone was pursached on his release, I have downloaded GINGERBREAD VERSION. I have tried to flash it but without success too. Green progress bar is moving to the end and after some time it writes "fail"
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Kernel_I9100XXKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> zImage
<ID:0/010> NAND Write Start!!
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have galaxy s3 I9300 16GB
yesterday my phone got in loop of "touchwiz has stopped",
and couldn't do anything.
I tried to wipe cache - but it didn't worked.
I tried to flash new rom, but it failed,
and the phone was stuck on a screen telling me to recover with kies
Kies didn't recognize my device - it just keep connected forever but nothing else
so I search the internet, and advised to repartition the phone using pit file.
I did it, and now samsung logo blinked, and I can't access the volume up menu - only to the download screen.
When I try to flash rom - it starts, and stack on NAND write start - forever
enclosed;
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK7_I9300OJKGNB1_I9300JKUGNB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1005)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> sboot.bin
<ID:0/010> NAND Write Start!!
please advise
@yalaniv: I guess your internal storage is gone.
What does it mean?
rp158 said:
@yalaniv: I guess your internal storage is gone.
Click to expand...
Click to collapse
Can it be fix?
What should I do now?
@yalaniv: a regular reparation in a service center doesn't make sense. So either look for a cheep way to repair or another phone.
Please find and read this post I just made, follow the directions.
http://forum.xda-developers.com/showthread.php?t=2535367
Hello, so recently I bought my first samsung device and tried to root my Samsung Galaxy S6 Edge and I was a complete newbie in doing this so then my device keeps saying Recovery Is not Sendroid Enforcing on the start up screen. I Live in Australia and am currently with the carrier Vodafone.
Help PLease
So I tried doing a stock firmware update with a .tar I found somewhere that said it was for the SM-G925I Vodafone Australia so I downloaded I go on Odin Tick Auto Reboot and F. Reset time i then tick AP and select the .tar file it takes a while to check the file then it says leave cs I connect my phone to my pc I then press start and get fail. It says then on my phone SW REV. CHECK FAIL. DEVICE: 3, BINARY: 1
ODIN Script:
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925IDVU1AOC4_G925IVAU1AOC4_G925IDVU1AOC5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Loquar said:
So I tried doing a stock firmware update with a .tar I found somewhere that said it was for the SM-G925I Vodafone Australia so I downloaded I go on Odin Tick Auto Reboot and F. Reset time i then tick AP and select the .tar file it takes a while to check the file then it says leave cs I connect my phone to my pc I then press start and get fail. It says then on my phone SW REV. CHECK FAIL. DEVICE: 3, BINARY: 1
ODIN Script:
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925IDVU1AOC4_G925IVAU1AOC4_G925IDVU1AOC5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
i am having same issues just trying to get my phone back to stock, have tried various different firmwares but just cant get odin to flash...
never had this issue on any previous fones and have been flashing many samsung devices for many years...
but the phone came to me in a bricked state so not sure as have read here that something to do with bootloader, not sure if phone was rooted or what firmware it was on before...
all i would like to do is get it back to stock firmware and running up an normal....
is there a simple way or simple files that i need?
I'm having trouble with flashing the stock rom for the Samsung Galaxy S3 on Odin, as I get a fail everytime I try to flash the rom onto my device.
This comes up everytime I try to flash:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGOK1_I9300NZCGOK1_I9300XXUGOK1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The model number is a GT-i9300, and no stock roms so far have succeeded.
I have used Odin 3.07 and Odin 3.09, my samsung drivers are up to date and Odin still fails to flash the rom.
I've also tried different usb cables, along with trying out different ports, none of them have worked.
On the S3 it's currently running TWRP version 3.0.2-1, it also asks me whether or not I keep it "System Read only" whenever I go in recovery mode. And each time I always choose the option of keeping it read only. I don't know if these has anything to do with Odin failing to flash the rom but might as well mention it. I was also running CyanogenMod13 for roughly a month before the brick happened.
Any help would be appreciated !
Reply
Kiddzu said:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGOK1_I9300NZCGOK1_I9300XXUGOK1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
Click to expand...
Click to collapse
Hi, after NAND Write Start!! and this double !! means it start to WRITE on your Device Flash Memory when this fails it means that the cable dont transfer correct data / Cable Connection OK but wrong cable cannot write correctly on your device
I recommend you to use Original cable when flashing or a other cable but look for the compatibility to devices:good:
as far as I know it cant be a other opportunity to fix this because in the Download Mode of the s3 is the only way to Flash Original Firmware when this fails i dont now how to continue and i cannot help you more than that
And sry for my bad as fu** English