Hi everybody!
I'm actually running the MiniCM7 from nAa (version 2.2.1 with nAa kernel v.11) and I can't connect my phone to my PC anymore! Any PC displays the ''USB Slot not recognized'' and my phone won't display the ''Connect to your PC'' message in the notification bar. Any help please? Thanks a lot
TheDarkTemptation
TheDarkTemptation said:
Hi everybody!
I'm actually running the MiniCM7 from nAa (version 2.2.1 with nAa kernel v.11) and I can't connect my phone to my PC anymore! Any PC displays the ''USB Slot not recognized'' and my phone won't display the ''Connect to your PC'' message in the notification bar. Any help please? Thanks a lot
TheDarkTemptation
Click to expand...
Click to collapse
1st make sure which one is the problem, is it from the phone or from the pc. have u try to put the cable in other usb port on your pc?
Try to re-flash your rom once again. If that is not working too, reboot your phone in cwm. make sure the cable is connected between your phone and the pc, then select mount and usb in cwm. select mount usb. see if this working for you.
<-----If i helped u
Thanks for your answer but I've already tried all those options... I'm deseperate now. :/
TheDarkTemptation said:
Thanks for your answer but I've already tried all those options... I'm deseperate now. :/
Click to expand...
Click to collapse
Does it charge when the USB cable is plugged in? E.g. does the phone state that it is recharging?
If in Windows, check if the device manager (Start Button > Right-click on Computer > Properties > Device Manager) still detects 'something' on the USB port, if you see a yellow exclamation mark, perhaps reinstall the drivers for your phone. (Flashtool comes with drivers IIRC). In any case, it might be worth a try to run SEUS with the phone disconnected, then it'll offer a 'repair' option, after which you must select your type of phone and connect it, hopefully the tool does not rely on the same driver. This would flash stock rom and stock kernel to your phone.
Should this fail, if your battery and WiFi still work, perhaps you can engineer a solution that downloads a new ROM over WiFi. You could upload it to your Google drive and download through the app or just use the internet browser. Then use a file manager like Root Explorer to move the files to the correct location on the SD-Card. Boot it into CWM and flash the new ROM and see if it helps.
Is the stock SE cable???, have you tried with another cable???
I have the same problem with the SE cable, my phone don't connect correctly with my PC, it disconnects automatically or never work...
Actually I'm using a Samsung cable for use the phone with my PC and works perfectly.
Actually u can try to take out the memory card and used card reader to other ROM beside that u used one. Then flash it. see how it going.
Problem mounting usb on cm9 3.0.3
ponext said:
Actually u can try to take out the memory card and used card reader to other ROM beside that u used one. Then flash it. see how it going.
Click to expand...
Click to collapse
I have a similar issue with CM9....Everything was working fine untill 2 days ago the USB no longer mounts!! I can charge my phone but can mount the sd card..Tried reflashing the kernel,the rom and stuff its not working...Any help would be appreciated!!
:crying:
Thanks for all those answers but it doesn't work at all... I even buyed an official version of windows and a new usb cable, downloaded a new rom (XPM V.13) and tried to mount via CWM but that doesn't work! And I think I'll have to wait till November to get a new phone. FML.
Tried through a different computer?
speedsys said:
Tried through a different computer?
Click to expand...
Click to collapse
Already tried... 6 times.
Only some cables. Work on the MP. Samsung for sure. It might be the USB port, not the cable so you may be a Tad screwed. Sorry
X10man
Sent from my Fender Stratocaster to your face via XDA Premium
x10man said:
Only some cables. Work on the MP. Samsung for sure. It might be the USB port, not the cable so you may be a Tad screwed. Sorry
X10man
Sent from my Fender Stratocaster to your face via XDA Premium
Click to expand...
Click to collapse
Thanks X10man, I've checked the inside of my X10 MP and the USB port is ****ed up. Gotta wait till november for a Xperia S Or a HTC. FML Again.
Related
First of all I am a big-Noob.
My LG optimus one P-500 is in stock ROM.
My Problem :-
Earlier USB was working fine but now
when I plug it in to the AC Adapter it charges OK but when I plug it in to the USB after that it only charges and neither the Phone nor the PC recognizes the USB data connection.
I have tried
1) Power off the phone and remove the battery for a couple of seconds and power it back up, after doing this the USB does not connects. Not even recognised by PC or Phone
2) Device manager also does not detect anything.
3) Uninstalled modem driver and reinstalled USB driver but no result.
Please help
Thanks in advance
Cheers
Request again
Dear mates
I have really very high respect for the forum so please help me out.
ThanQ
Cheers
This happened to me twice before. I had to send it to LG's Service Center because I saw no way of fixing it since the computer wouldnt know what to do with it...
If you have custom recovery installed, you might be able to flash an original ROM over it. This wasn't an option for me before and it seemed like the only way to fix my phone. Don't take my word for it though. Try for the service center first if possible...
Did you try going to settings and choosing Mass Storage only?
Also, change the USB port of the cable with which you connect your phone (plug the cable in another one - try this with all ports if it doesn't work the first time)...
Before going to any service, do a backup and Factory Reset your device, then try again...
Oh, and disable LG modem from Device Manager after installing the USB drivers.
USB not getting detected
I am trying in choosing Mass Storage only.
"Also, change the USB port of the cable with which you connect your phone (plug the cable in another one - try this with all ports if it doesn't work the first time)..."
Not helping either
Disabled LG modem from Device Manager after installing the USB drivers.
No use
Before going to any service, do a backup and Factory Reset your device, then try again...
I will try this definitely but going to service means 3-4 days without phone . really very scary .
thanks mate
anymore help
Okay , I did face this problem before and I did about hundreds of advice from my friends but this is the step that works.
I discovered that this happens when you do crazy **** on your sd card with applications such as titanium backup or root explorer. Curiousity kills the cat.
Firstly you need:
1) Usb Card Reader [Of course which suits with your sdcard]
2) Computer
Firstly, you want to dismount the sdcard from your phone and mount it to the USB Card Reader.
Connect the Usb Card Reader to your Computer.
You should be able to gain entry to the sdcard
Next,clear everything on your sd card then place your sd card on your phone back and do a factory reset. If you don't do a factory reset then you must do it all over again if you decided to connect the usb to the phone. After reset-ing the phone , try to connect your phone to the computer. Congratulations.
Note: This works for me but it doesn't meant that it will work for you , but I think that this is worth the try.
sanagg1 said:
First of all I am a big-Noob.
My LG optimus one P-500 is in stock ROM.
My Problem :-
Earlier USB was working fine but now
when I plug it in to the AC Adapter it charges OK but when I plug it in to the USB after that it only charges and neither the Phone nor the PC recognizes the USB data connection.
I have tried
1) Power off the phone and remove the battery for a couple of seconds and power it back up, after doing this the USB does not connects. Not even recognised by PC or Phone
2) Device manager also does not detect anything.
3) Uninstalled modem driver and reinstalled USB driver but no result.
Please help
Thanks in advance
Cheers
Click to expand...
Click to collapse
Ur phone charges through usb that means your phone usb port/usb cable is ok. Do this :
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Sent from my LG-P500 using Tapatalk
Got exactly the same situation with USB(on different PCs) and also Emergency mode on every reboot(taking battery out for about an hour helps).
Did SD wipe though not sure about factory reset afterwards, gotta try it one more time...
mansirawat said:
"Ur phone charges through usb that means your phone usb port/usb cable is ok."
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
I would argue that, I have a samsung omnia that outright refuses to do anything besides charge over usb.
Brainy142 said:
I would argue that, I have a samsung omnia that outright refuses to do anything besides charge over usb.
Click to expand...
Click to collapse
Is it android ?
Lets wait for op reply.
Sent from my LG-P500 using Tapatalk
mansirawat said:
Ur phone charges through usb that means your phone usb port/usb cable is ok. Do this :
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
Unfortunately, it did not help either.
any ways,thanks for pointer
Cheers
mansirawat said:
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Click to expand...
Click to collapse
I have tried uninstalling driver and just plugging in with USB but still neither PC nor phone detects USB connection.
I have tried it on Win7, Win Vista and WinXP.
respected mates please help me.
I am on transfer in June so don't want to take chance with Service centre as of Now.
Cheers
Are you sure you are having the latest driver?
try this:
Code:
csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
install it,
(you may have to choose language from the last tab, 1st or 2nd option)
and choose P500 from "driver installation"
I didnt experience this issue but if i cant help im sorry.
Miasmic said:
Are you sure you are having the latest driver?
try this:
Code:
csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
install it,
(you may have to choose language from the last tab, 1st or 2nd option)
and choose P500 from "driver installation"
I didnt experience this issue but if i cant help im sorry.
Click to expand...
Click to collapse
I could not find P500.
the names were associated with carrier like T-mobile, verizone etc.
any suggestion
I know i'm stupid
cheers
sanagg1 said:
I could not find P500.
the names were associated with carrier like T-mobile, verizone etc.
any suggestion
I know i'm stupid
cheers
Click to expand...
Click to collapse
Try another cable.
Sent from my LG-P500 using XDA App
None of the above methods worked on mine as well - same results on different cable(pc/os).
Will try to flash rooted original firmware via custom recovery, del custome recovery and root and send it to service.
Long story short - was running WB v3.9.0 Gingerbread on my x10, worked flawlessly... until my usb cable stopped working. Went out and bought a new one... Charged phone for 2 hours fine, tried to plug into PC to update to WB v4.0... PC didn't recognize my phone...
Tried downloading new drivers etc.. nothing worked. So i rebooted phone:
Surprise Surprise! SD Card is unmountable!
rebooted into xrecovery and did a factory reset/wipe of everything.
then tried to restore my backed up rom.... SD card unavailable...
Tried to manually mount sdcard, didn't work
Tried formating SD card - no luck there!
Now i'm stuck with NO ROM, no way to plug my phone into my computer to download a ROM, a constant bootloop with no firmware and a crappy replacement nokia...
Any help would be MUCH appreciated! (other than taking it in to repair) I don't know if my warranty will cover this much destruction...
EDIT: called up my service provider (3 australia) and they immediately agreed (to my utter delight and complete surprise) to swap my handset for a brand new HTC Desire HD...
It's a shame i'm now leaving the x10 forums - i really did love the phone, but for an offer like this i don't think many people would refuse the trade.
Thanks everyone for your help and input and see you (or not) on the Desire HD forums
Looks grim... you might be out of luck...
Sent from my X10i using XDA Premium App
Frosty666 said:
Looks grim... you might be out of luck...
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
especially the nokia replacement eh?
What version of xrecovery are you using?? Is the latest one which is gingerbread fix? The version that is not fix for gingerbread have that problem with mounting sd card. So try the latest from here: http://forum.xda-developers.com/showthread.php?t=859571&highlight=xrecovery
Another question: did you try with flash tool? maybe in flash mode your phone will be recognized.
try to put your SD card into a card reader and copy the existing data to your computer.
then format the SD card with Panasonic SD Formatter - I can't include the URL as I'm a new member. Just google it.
After formatting the SD card, put all data you copied to your PC back on the SD card and try again.
Maybe it works, I had a similar problem and could fix it as detailed.
if not...phew...good question...
can you get in flash mode? well if you can then reflash using SEUS
and search for drivers in forums.
did u try the flashtool to flash it bak to 2.1 SE rom ? i faced the same problems like u b4..
if u stil can access into xrecovery , u can try this
http://forum.xda-developers.com/showthread.php?t=1054818
nipun123 said:
can you get in flash mode? well if you can then reflash using SEUS
and search for drivers in forums.
Click to expand...
Click to collapse
nickymy said:
did u try the flashtool to flash it bak to 2.1 SE rom ? i faced the same problems like u b4..
if u stil can access into xrecovery , u can try this
http://forum.xda-developers.com/showthread.php?t=1054818
Click to expand...
Click to collapse
It connects in flash mode, but my computer doesn't read the usb connection in order to flash... neither does any other computer :S
actually i still don understand wat u mean by pc cant read the connection... when u start to flash ur phone bak to 2.1 SE generic rom, ur phone should be having a green light led right ? is the flashmode aborted at the half way bak or totally there is no connection at all?
sorry for asking so much, bcoz i faced this problem b4..i would like to help u too...
Hey, I also had same problem with my sd card. I couldn't mount it via xrecovery also The solution is very very simple You just have to buy a sd card reader. It coasts less than 1 euro. You will have to format your sd card, then copy someones zip with ROM and your phone is repaired
I'm stuck in the same boat. When I lug my phone in it says " USB Device not recognized." In device manager on my computer it says, "The USB device attached to this computer has malfunctioned, and Windows doesnt recognize it."
the phone goes into flash mode but the phone is not recognized in flashtool!
vpllover said:
I'm stuck in the same boat. When I lug my phone in it says " USB Device not recognized." In device manager on my computer it says, "The USB device attached to this computer has malfunctioned, and Windows doesnt recognize it."
the phone goes into flash mode but the phone is not recognized in flashtool!
Click to expand...
Click to collapse
So then try seus repair
SEUS wont recognize the phone!!
u might want to try the phone on a differrent cpu /laptop and run flashtool again.
Some cpus just dont want to detect. I have a few cpus i know,i do all the stuff on my win7 laptop cos its the one that does not give me any problem. one thing the laptop is original win7 64bit,the rest of the cpu is pirated xp,maybe thats why.
try it .
tried it on 2 different PCs, same frikkin error!
Have you downloaded the latest USB drivers and latest sues. My phone could not be found till I did that.
Kieron
Sent from my X10i using XDA Premium App
nickymy said:
actually i still don understand wat u mean by pc cant read the connection... when u start to flash ur phone bak to 2.1 SE generic rom, ur phone should be having a green light led right ? is the flashmode aborted at the half way bak or totally there is no connection at all?
sorry for asking so much, bcoz i faced this problem b4..i would like to help u too...
Click to expand...
Click to collapse
My problem is getting the computer to even recognize that the phone is plugged in. It's not even giving me a message saying 'device not recognize', it's totally ignoring it. Therefore i can't use SEUS to reflash the phone as when i plug in my phone in flashmode it doesn't read it.
As for formatting my sd card - that's not the problem... i have 2 sd cards (one brand new that i bought as a spare) and i tried both and neither of them worked - something seems to have happened to the actual hardware of the phone
I'm taking it in to repair tomorrow - this is the second x10 that's done this... maybe it's my computer?
kieronw3 said:
Have you downloaded the latest USB drivers and latest sues. My phone could not be found till I did that.
Kieron
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
Also - i can't find a link to the drivers on the forums anywhere - but i honestly doubt that's the problem - the phone was working 100% yesterday.
This may be out of the box but have you tried looking at the USBSTOR in your registry?
I had a problem before that my phone is not being detected by my laptop because of that. Just set it to 3 to enable it.
are u sure the cable you bought is a data cable not a charging only cable? Maybe the cable had a defect? also if the cable that went bad is the stock one see if the tip if bent. if the tip is bent try to make it straight.
Hello,
I am a avid flasher and i ran into a problem today i pluged in my X10 into my computer and all it will do is charge.
I have tried 3 Different cable on 3 Different computers.
I am currently running wolfbreak v5.0.0c with doom v5 Dev.
I have tried loading and old backup of wolf v4 - Nothing
I have tried wiping data and re loading wolf v5 - Nothing
I have tried using SEUS - Nothing
I have tried Flash Tools - Nothing
Its like my phone does not see the data steam and only sees the power any ideas?
Thanks,
Soulflyz
Soulfl said:
Hello,
I am a avid flasher and i ran into a problem today i pluged in my X10 into my computer and all it will do is charge.
I have tried 3 Different cable on 3 Different computers.
I am currently running wolfbreak v5.0.0c with doom v5 Dev.
I have tried loading and old backup of wolf v4 - Nothing
I have tried wiping data and re loading wolf v5 - Nothing
I have tried using SEUS - Nothing
I have tried Flash Tools - Nothing
Its like my phone does not see the data steam and only sees the power any ideas?
Thanks,
Soulflyz
Click to expand...
Click to collapse
Hi,
Somebody posted in Dooms thread yesterday with the same issue...
http://forum.xda-developers.com/showpost.php?p=17678186&postcount=580
read through the thread to see if he managed a fix or contact the member with a pm.
http://forum.xda-developers.com/showthread.php?t=1253853
i tried a full wipe with a wolfbreak 6.0.0g it started to install then i got a
E:Cant symlink /system/bin/dumpcrash
E:Failure at line 10:
systemling dumpstate SYSTEM:bindumpcrash
Install aborted.
Here try this ...
http://forum.xda-developers.com/showthread.php?p=9561575
Sent from my X10_AOSP using xda premium
Thank you for trying but another miss...
Still no go...
I wish i had more ideas
Soulfl said:
Thank you for trying but another miss...
Still no go...
I wish i had more ideas
Click to expand...
Click to collapse
Try this.....
http://forum.xda-developers.com/showpost.php?p=17690089&postcount=595
Mainly try the last part first.
thank you again but no go...
I tried with no luck,
The memory card mounts into the phone fine and i can use xrec.
What i cant do is when i plug the usb into the computer it does nothing.
All i get is a marker that says charging.
I have even bin able to install through xrec, wolf v4, v5, and currently running v6 with no usb support to flash tif files, SEUS, or transfer stuff on any of them.
Soulfl said:
thank you again but no go...
I tried with no luck,
The memory card mounts into the phone fine and i can use xrec.
What i cant do is when i plug the usb into the computer it does nothing.
All i get is a marker that says charging.
I have even bin able to install through xrec, wolf v4, v5, and currently running v6 with no usb support to flash tif files, SEUS, or transfer stuff on any of them.
Click to expand...
Click to collapse
What other kernels have you tried?
Can you use flashtool?
im on dooms unlocked boot loader so i cant connect through usb to try a new one... (the only way to try a new one is with a tif file right?)
Thanks,
Soulfl said:
im on dooms unlocked boot loader so i cant connect through usb to try a new one... (the only way to try a new one is with a tif file right?)
Thanks,
Click to expand...
Click to collapse
Flash this with xrecovery then see.
http://doomlord.sylvester20007.com/x10/x10_gb/dk/v04-FS/dk-v04-FS-modfxp_with_xrec.zip
You have bin amazing today but still no luck...
I saw that zip was v4 when i go into about phone it still says v5.
Thank you,
Sorry my mistake, you need to go back to stock kernel first, it is in one of Dooms thread somewhere, sorry i am not on pc now.
Sent from my X10_AOSP using xda premium
Thank you for the help today i will see what i can find to get back to stock kernal...
I will be away from the computer for the next few days so i will re open this thread then...
After 8 hours of looking i could not get my phone to connect through usb to flash or manage files.
I think i have narrowed it down to the kernal but i may be wrong.
I am running doomkernal unlocked so without flashing the kernal i have no clue how to fix this since i cant connect through usb.
Soulfl said:
I will be away from the computer for the next few days so i will re open this thread then...
After 8 hours of looking i could not get my phone to connect through usb to flash or manage files.
I think i have narrowed it down to the kernal but i may be wrong.
I am running doomkernal unlocked so without flashing the kernal i have no clue how to fix this since i cant connect through usb.
Click to expand...
Click to collapse
could your USB port be dammaged??? just a thought. maybe get a magnifying galss and have a look to make sure all the pins are ok.
Pvy.
I thought that so I pulled it all apart and the sodder points are all still good.
Sent from my X10i using XDA App
Soulfl said:
I thought that so I pulled it all apart and the sodder points are all still good.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Have you had any luck mate?
If not try these drivers on your pc and then connect your phone.
yeah my USB port is going too it sucks. Need to be soooo careful when flashing new kernels now or I may brick it as it's unlocked
If I don't have the wire in just a certain way it senses nothing, and the cable is able to like wiggle around in there like the connection is getting loose. Bad times
rotundo said:
yeah my USB port is going too it sucks. Need to be soooo careful when flashing new kernels now or I may brick it as it's unlocked
If I don't have the wire in just a certain way it senses nothing, and the cable is able to like wiggle around in there like the connection is getting loose. Bad times
Click to expand...
Click to collapse
Yes i thought my port was on its way out but tried a new cable and everything is fine now.
I don't think its my port but at the moment its ask I can think.
The drivers won't help my phone is not even sending the info to say a USB is plugged in.
Sent from my X10i using XDA App
Hey guys.
My girlfriends Galaxy S 2 won't even recognize it's plugged into my laptop, yet it will charge.
Now it's no deal at all as she never plugs it into a PC anyway, I just transfer stuff bluetooth.
But I want to put a custom ROM on it to get rid of all the carrier bull****, but being un-able to connect to a PC, how can I root it and install one using just the handset itself?
Please help me?
aussiesausage said:
Hey guys.
My girlfriends Galaxy S 2 won't even recognize it's plugged into my laptop, yet it will charge.
Now it's no deal at all as she never plugs it into a PC anyway, I just transfer stuff bluetooth.
But I want to put a custom ROM on it to get rid of all the carrier bull****, but being un-able to connect to a PC, how can I root it and install one using just the handset itself?
Please help me?
Click to expand...
Click to collapse
Not possible imho without pc, uninstall and reinstall Kies or the usb drivers for connection. Disable usb debugging.
Oh ok, bugger. And I've tried doing that, doesn't seem to work.
The phone doesn't even come up that it's plugged in. Nothing.
search in the development section
there was a method to root ics without flashing anything from pc
I have but can't find anything.
aussiesausage said:
I have but can't find anything.
Click to expand...
Click to collapse
Yoy usb drivers are not working, reinstall them again in Kies and reboot the pc. than connect again.
aussiesausage said:
Hey guys.
My girlfriends Galaxy S 2 won't even recognize it's plugged into my laptop, yet it will charge.
Now it's no deal at all as she never plugs it into a PC anyway, I just transfer stuff bluetooth.
But I want to put a custom ROM on it to get rid of all the carrier bull****, but being un-able to connect to a PC, how can I root it and install one using just the handset itself?
Please help me?
Click to expand...
Click to collapse
Is the S2 already running ICS firmware? If so you can easily root using the method here: http://forum.xda-developers.com/showthread.php?t=1501719
Just put the two linked files on your internal sd (either transfer then via bluetooth or directly download from your phone through the browser) and follow the instructions, literally a 2 minute job.
Yeah seen that, but it's not ICS
gee2012 said:
Yoy usb drivers are not working, reinstall them again in Kies and reboot the pc. than connect again.
Click to expand...
Click to collapse
Nope no go, just did that. KIES just says please connect a device
My galaxy Nexus connects up fine, just not her Galaxy S 2 yet it will charge fine. Dunno why.
EDIT: I take that back, left it plugged in and now it's making weird noises and sayings installing device driver software.
Sorry somebody else had posted my way of doing it
Just to eliminate another option have you tried cleaning the USB port on the phone, I have seen quite a few posts here and there saying that it has helped
dj_sploits said:
If you are on a stock ICS ROM then you could always get the files for CF-Root. You pop them on your SD card and then you root your device from the phone itself. After that you could send the custom roms over to the SD card and install them that way? No PC needed
I'm sure this way works but if not hopefully somebody will correct me
Click to expand...
Click to collapse
Not possible, you have no cwm to flash it with, sammy`s 3rd recovery doesn`t allow flashing custom software. You need to have cwm.
---------- Post added at 09:17 AM ---------- Previous post was at 09:16 AM ----------
You could try another usb port
Now WTF.
I rooted it, used Rom Manager to flash CWM and it's still the stock one.
Why isn't my phone this ***** hard.
aussiesausage said:
Now WTF.
I rooted it, used Rom Manager to flash CWM and it's still the stock one.
Why isn't my phone this ***** hard.
Click to expand...
Click to collapse
Why are u using rom manager, it causes problems with sammy based roms. Turn off the phone, press volume up + menu +power buttom at the same time, you should get in cwm. Don`t use rom manager!
Did you try to connect on another pc? Or at least on another usb port? Windows should at least recognise that a new hardware has been plugged in
Hi to all!
Since yesterday, my PC which is running W8 gave an error whenever i tried to connect my xperia mini to my PC. 'USB device not recognized'. I was running CM 10.1 and a new update was available so i tried to flash it. Flashed it successfully and then the network was gone so, what i did was flash back to CM 9.1. Here the problem occurred. My PC is not recognizing my phone. I tried flashing the kernel with flash tool and followed this :- http://forum.xda-developers.com/showthread.php?t=2095087 Still nothing. Connected it to another laptop running windows 8. Even that didn't work so i connected my phone to my dad's laptop running windows 7. I was somehow able to flash kernel at first but then the same error there too! Tried 3 different PC's and i'm not able to solve this issue! Please help!
as you have a custom kernel on device,try accessing CWM and installing the stock ROM,then install CM again..
btw did you check the CM10.1 page for any bugs..?
a|\|droid_user said:
as you have a kernel on device,access CWM and try installing the stock ROM,then install CWM again..
Click to expand...
Click to collapse
Tried 2 different ROM's on the same kernel. Nothing happens. I get the same error each time! Also now my ear-piece won't work too (In both the ROM's i flashed) :'(
I also noticed that using Win XP, i can connect MSC to my PC and copy/paste items. But as soon i go into fastboot mode, it gives me the error!
Edit: I have used CM 10.1 before with no bugs. This started happening only yesterday!
I know this sounds dumb, but do you have ADB on (android debugging) because my windows 8 computer doesn't recognise my phone without it on. Hope I helped.
Gamertroid said:
I know this sounds dumb, but do you have ADB on (android debugging) because my windows 8 computer doesn't recognise my phone without it on. Hope I helped.
Click to expand...
Click to collapse
I have everything installed! Right now i'm on XP. Even it doesn't recognize my phone in fastboot mode!
check device manager..
when you connect your xperia..what does it show ?
try updating the driver by manual selection...
if that doesnt work..
open flashtool..
check the logs when you connect your xperia..
-DELETE-
I somehow managed to connect it to flashhtool in flash mode! Now i'm flashing .42 ftf file to use my device somehow with 0 bugs/glitches. It is taking forever to do so! See the attachment!
Any other way to flash ftf file?
Thank you
Okay, so i did flash the ftf and now running GB .42 Still can't connect to computer
What should i do?
Is your computer detecting any other xperia device,or an iphone...?
check if your micro usb port is damaged...
Sent from my WT19i using xda app-developers app
ishanbhatnagr96 said:
Okay, so i did flash the ftf and now running GB .42 Still can't connect to computer
What should i do?
Click to expand...
Click to collapse
Goto flashtool/drivers/ and install drivers and check...
a|\|droid_user said:
Is your computer detecting any other xperia device,or an iphone...?
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
It is detecting my pendrive, my hard-drive and my nexus!
Edit: Tested on 3 laptops each running:- Win8 and other two Win7. Also, tested on 1 PC (dual-booted with XP and Win8) Same result in all of them.
Is SEUS detecting the phone?
Try changing connection modes on the phone...
if not..flash stock kernel
get me a screenshot of flashtool logs for check drivers option..
its here help->check drivers..
Solved (I guess)
Well i guess i solved the problem! I plugged the USB to the back ports. It worked. I guess this is a temporary solution. Now i think my SdCard got corrupt or something. I'll format it
Thanks for all your help guys! :highfive:
PS:- I'll disturb you guys if i face this problem again
ishanbhatnagr96 said:
Well i guess i solved the problem! I plugged the USB to the back ports. It worked. I guess this is a temporary solution. Now i think my SdCard got corrupt or something. I'll format it
Thanks for all your help guys! :highfive:
PS:- I'll disturb you guys if i face this problem again
Click to expand...
Click to collapse
Maybe its the prob with ports, others reported it not working with usb3.
Regards
-N
ishanbhatnagr96 said:
Well i guess i solved the problem! I plugged the USB to the back ports. It worked. I guess this is a temporary solution. Now i think my SdCard got corrupt or something. I'll format it
Thanks for all your help guys! :highfive:
PS:- I'll disturb you guys if i face this problem again
Click to expand...
Click to collapse
well,why dont try reinstalling your usb controller drivers to see if the front port is workin?...
otherwise if you are done with this problem...change the topic to RESOLVED..