I've had some fun with the TG01 after finding after a couple of years, manged to play a few roms 6.5>7 and back to 6.5 and then managed to brick it after messing with EFS2 in a bid to unlock.
Thanks to qinwengui I managed to get it working, but I'm stuck with one ROM that I would like to change from.
At the moment I have 'miRom 7 radio 0321' rom running from mirolg's thread " http://forum.xda-developers.com/showthread.php?t=1367055" but I can not change it to any other other rom??
I've been trying to change to another one or two that I'd like to try from the rom section but they will not boot.
I can sucessfully use TG downloader or MicroSD card and although any other rom will flash, the phone will not boot.
After ever attempt, I need to go back to miRom 7 radio 0321, which works fine everytime.
Am I missing something obvious?
I've only tried the following "[ROM][miROM1_rel. 6][ENG][18.04.2011] HTC SENSE 2021 with 96 MB free RAM " &
"[ROM][miROM12][ENG 31.12] [GER 02.01] NEWest Build 29007 OS6.5.3 CLEAN 94 MB free RAM" but they will not boot up.
I suppose I'm grateful I have the phone working again in the main, but I'd love to try another ROM if possible.
As said, can use TG Downloader, 100% sucessful message appears, phone will not restart automatically. When I manually restart, green light, will not boot.
I can also use SDDL/prg, phone shows white screen, do not remove SD or power off, takes a while, then will not boot.
Any ideas would be truly appreciated.
D
Hi.
First I suggest to flash any official rom ( it was said in different threads it could help in some cases because it contains full kernel ). If it works You will be able to flash any custom roms. It it not help, maybe You have not original bootloader from WM6. but this one that was needed to install WP7 ?
Regards
fdjacentyfd
Thanks for the advice and good shout for the boot files. Any quick way to check? I have tried a malaysia official rom as I could not find much else -
TG0110_5005180028TSW.tsw but still same, not boot. Thanks though
I guess , roms You want to flash have not radio 321 ?
I think You will be able to flash any rom with radio 321 so maybe simply change a radio in any rom You want to have to radio 321. First start with official rom. Maybe after success of such operation You will be able to flash any rom with radio other than 321.
Regards
Wow, That's me lost now
I just followed every step from this post "[GUIDE] upgrade to wp7 / flash wp7 rom/ downgrade from wp7 to 6.5 WM OS"
My thinking was in case as you mentioned the boot files were wrong, all worked right up to boting on WM7 rom and I got a black screen with a picture of the phone connected to PC in white colour. Could not get past that. Now backtracking and also following the get back to WM6.5 tut and another rom, still no go. As I write, trying the 0321 rom that has been working. I can't get my head around this.....
Are you thinking that I can only use a rom with the radio 0321? Is this my problem?
Long pause as the 0321 rom via tg downloader is on 99%, may aswell wait to update -
WORKING! Absolutely stuck as to why this is the only rom that works, tried a few 6.5, a few WM7???
D
I am bit confused now . What is working ? Still Miro7 rom with radio 321 loaded via tg downloader ? If so , could You test any official rom ( use sdll+ ) changing it radio to 321 ? Radio 321 has always been "suspicious" for me. Taken from God knows where with for eample battery driver bug . That is why I do not use it even if some people
are say enthusistic oppinions about it.
Regards
yes, sorry for any confusion. The only rom I can get workign is the 0321 rom posted on mirolgs tut for 6.5>7>6.5??
thanks !
fxdjacentyfxd.... thank you Changed rom 0321, job done! TY!!
Related
As per the title... enjoy everyone
http://giesecke.tk:8090/privat/topa...&download=RUU_Topaz_WM65_HTC_WWE_2.01.405.exe
mirror thanks to xkovi
http://rapidshare.com/files/249662958/RUU_Topaz_WM65_HTC_WWE_2.01.405.exe
EDIT:it is a beta version of the ROM, it won't flash as such. pls use the following RUU.NBH file which contains the OS only part if u want to test it.
http://giesecke.tk:8090/privat/topaz_rom/index.php?dir=Cooked_ROMs/WM+6.5/Aman/&download=RUU.rar
Are u kidding me? Really stock rom with WM6.5? Have u already tried it???
Cant believe its true!!!!!
OMG
i cant belive it
Can someone post mirror please...Rapidshare maybe
what is the source of this rom?
Is this the official 6.5 release..? Could you comment on the source of this..?
Dont download it semi bricks the Topaz - Shadowline said in xda-devs irc
After trying to flash, it sticks at 99% and then dies after a few min. Which causes the phone to only start back into tri color bootloader with errors and no longer boot WM. Luckily flashing another rom is still possible.
Use caution when testing this rom. It may be just an isolated event or something more serious.
On another note, the next roms that I flash now say "Test rom only Not For sale" lol
im flashing now, lets se what hapends
Seemse genuine enough, but I wont know until im done flashing (5 min!)
Thx for your post shadowline, it was a few seconds before I wanted to start flashing
However, if someone wants to test it, here's the mirror:
http://rapidshare.com/files/249662958/RUU_Topaz_WM65_HTC_WWE_2.01.405.exe
yupp, hangs at 99% for me to.. Well.
Thanks for the update.. I was just about to do my first flash of my 1 week old Topaz! I will wait. Just wonder why the the thread starter is quiet and gave little information at the opening post!?
Plz be carefull with this!!!!!
Downloaded twice the file.
Flashed 4 times, with NO success!!!!
1. Flashed with the original exe, the progressbar stuck at 99%, terminate with "Connection Error"
2. Extracted the .exe in separate folder and flashed again, same, progressbar stuck at 99%
3. Replaced the original RUU with that one what comes with all the cooked ROMs, again stuck at 99%
4. Extracted the secon download,flashed without success!!! Stuck at 99%
At least, flashed again with NTGZ28 Standard ROM and all is OK, no damage done to the device.
Any hope that our ROM Cooks solve that problem, if that is really a HTC WM 6.5 ROM???????
Update: this rom stopped at 99% (useing windows RUU), and when soft-reset it only shows color bars but will still be flashable with TOPAIMG.nbh on SD card *pooh*
So im flashing back EnergyRom now. Thank good for (mostly) failsafe flashing!
Do you or anyone that flashed (i use that term lightly lol) have that text about a test rom when you boot your device?
yes i have, red text on bootscreen. What's that about?
i've faced same problem as all of you. but i successfully managed to flash the OS part only. the red 'test only' text seems to be from the splash screen.
damn, I was sooo going to flash that!
!Aman! said:
i've faced same problem as all of you. but i successfully managed to flash the OS part only. the red 'test only' text seems to be from the splash screen.
Click to expand...
Click to collapse
could you please upload the os part that you flashed or tell us how to circumvent the other part?
Thanks
Before I flash my phone for the very first time, I need to know some things.
I know there are threads who give info, but they aren't always up-to-date or handeling about my phone.
So I want to know, I heard about a third version of HSPL.
What are the things that I need to do?
If I want to install a new rom, I first install HSPL, then the rom, but do I have to install something like a radio too? or something else?
Will a custom rom always work in my language (BE/DUTCH),
and which rom is good for texting (no lag etc).
I want a clean and smooth rom, with not much BS. Any advice?
I know it's a lot of questions, but I'm stuck with them for a long long time and I want to be well prepared.
Version of OS: 5.2.21869
Manila: 2.5.19211619.0
ROM: 1.66.404.1 (76641) NLD
RADIO: 2.06.51.07
Follow this thread step by step and you cant go wrong.
Its link you to HSPL3 and anything else you might need.
It tells you how to flash a radio (if you need to).....
It will tell you which radio you need in the thread for the rom your going to use....
You just have to read through all the rom threads to find out which one is going to be best for you...... I'd reccomend energy roms... I think they might only be available in english though. Different languages available will be listed in the rom thread...
The flash only takes 10 minutes...its the reading up first thats the time consuming part....
Hope it all goes well for you
thanks for the advice, I will follow it and read everything 10 times before flashing anything
HectiQ said:
thanks for the advice, I will follow it and read everything 10 times before flashing anything
Click to expand...
Click to collapse
Yea. Read it very very very carefully. Once you grasp the process, it's so easy and intuitive.
HectiQ said:
i will follow it and read everything 10 times before flashing anything
Click to expand...
Click to collapse
blimey, you can come again! hehe
So here are the steps that I'm about to take: (first off I saved all my data, sms, etc elsewhere).
1) flash HSPL 3
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
thread HSPL3 said:
Seems all ROMs based on 1.42, 1.66, 1.XX can work with 2.08 SPL without problems.*
Click to expand...
Click to collapse
My ROM is 1.66.404.1 (76641) NLD, so it seems that this is okay to do. I think I have the 'usualleo', can I check this somewhere?
When I look into RAM SIZE, it says 512 MB, and I don't know what telstra is, but I definitly won't need the last one (1024). I also think in HSPL itself, I need to choose 2.08.HSPL.
Next, I'm about to flash my first custom rom, and will follow the steps given here:
Flashing Via ActiveSync
1. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your computer
2. REMOVE SIM and microSD CARDS!! (this is a precautionary measure and is not compulsory)
3. Turn phone back on and wait until it syncs with your PC
4a. If your Rom is a .exe (customRUU.exe is already included in the Rom file) then run the file
4b. If your Rom is a .nbh file then run the CustomRUU.exe from the Roms Folder (if one isnt included then download it *HERE*)
5. Follow onscreen instructions to set up your New Rom
6. Once phone has gone through the customisation procedure then replace Sim and microSD Cards
7. Perform a Hard Reset to clear any leftover data from your previous Rom (see intructions at bottom).
8. Set up phone as required and job done.
Click to expand...
Click to collapse
I really can't find what ROM I should use..
I want a rom with landscape built in and the sms client 2016.
Are there much roms which include this?
yea thats all OK, except you dont really need to remove sim and sd. Only if you're stroubleshooting.
Plus, most cooked roms support 'autoinstall', , , create a folder on your sd card called autoinstall, put in there any cabs that are essentials, and the rom will install them as part of the post flash setup process.
as to which rom for what, thats gotta be down to you. Theyre all good, theres no such thing as a best rom, and what works brilliantly for one person makes the next person weep with frustration.
Flashing only takes 5/10 mins, you can try out a dozen roms in an evening.
Dont forget you only need apply hspl once. It will stay there till you either flash a stock from sd card (dont do this, theres no need nowadays) or you can run hspl2 (yes, hspl2) and choose your stock spl (1.42.0000 or 1.66.0000 or whatever)
can I run HSPL 2 after I firstly installed HSPL 3 for the custom rom I'm about to choose? And I'm guessing roms come packed (7z/zip/rar), need to unpack those files I guess? How do you actually start cooking a rom?
edit: I also gonna remove everything (hard reset) before I start flashing anything, so I start clean
Okay this is coming really close now:
http://forum.xda-developers.com/showthread.php?t=612580
Download Artemis 23.0 level A NLD (this I'm about to use)
I'm gonna go with artemis, but I also want a higher radio version. should I update my radio or my rom first? And how do I know which radio is compactible with that rom? the ones adviced in the rom? http://www.pilotlogic.com/artemis/htc_hd2_radio/ these?
I'm a bit confused what steps to take, in which order.
I know I have to HSPL first, (gonna use HSPL 3)
but then I doubt which to do first, rom or radio. And is it easy to install? Can I make any mistakes on this? what are the things that need special attention? thanks in advance guys, for all the help!
doesn't matter which order, except if you do rom first your phone will hang till you enter bootloader and flash a matching radio so most people say radio first.
heres how i'd do it
1 hspl3 (only needs doing once, not every time you flash)
2 enter bootloader manually
3 flash the radio
4 when it gets to 100% and is about to reboot, hold down voldown to go back into bootloader
5 flash the rom
6 allow phone to boot properly
samsamuel said:
doesn't matter which order, except if you do rom first your phone will hang till you enter bootloader and flash a matching radio so most people say radio first.
heres how i'd do it
1 hspl3 (only needs doing once, not every time you flash)
2 enter bootloader manually
3 flash the radio
4 when it gets to 100% hold down voldown to go back into bootloader
5 flash the rom
6 allow phone to boot properly
Click to expand...
Click to collapse
SUPERB!! Thank you for the clear advice! Will try this step by step tonight. Thanks samsamuel I really like xda everybody is helping out :d
I used the video guides the first time..........
Id have freaked out about the radio hanging at 96% if I hadnt already seen that on the video.
Watch each step before you do it, that way you know what to expect.....
Happy flashing.........
conantroutman said:
I used the video guides the first time..........
Id have freaked out about the radio hanging at 96% if I hadnt already seen that on the video.
Watch each step before you do it, that way you know what to expect.....
Happy flashing.........
Click to expand...
Click to collapse
oh indeed! I'ld freak out too! haha. Gonna check it out. Thanks conantroutman!
I hope the artemis rom (Artemis 23.0 level A NLD)
is compactible with this radio version: 2.10.50.28_2
Maybe anyone knows? if not I might ask it in the Artemis thread
think I'm good to go then, well prepared, thanks to you guys
update, just installed HSPL going slowly to the next step
damn guys? I'm really DOUBTING, should I flash a rom or a radio first?
I'm scared if I flash my rom first my cell won't startup because of incompactibility with my phone's rom? Or reversed ways. Can anyone advise me before I start?
Edit: took a leap of faith and trusted on the posts above, and I'm now running a new radio now only my rom and I'm done. Gonna see the video's and tuts first. I'll keep you updated. WOOOOOOOOOOOOOOW this radio is GREAT! my sound quality has improved like A LOT! very strange, with my original rom, I always heard noises, now it's way clearer when I call
hey man, nearly there.....
once your done you'll wonder what all the fuss was about....
only problem is...... you'll be hooked and looking for something else to flash...
glad its all going well.....
conantroutman said:
hey man, nearly there.....
once your done you'll wonder what all the fuss was about....
only problem is...... you'll be hooked and looking for something else to flash...
glad its all going well.....
Click to expand...
Click to collapse
yes, and it's all thanks to you guys here at xda, I even got to try android wow. But I'm gonna stick to mobile shell for a while, combine it with a new rom I'm about to select
I've just gotten my hand on a HTC HD2 and was flashing it just now using this guide...
theunlockr.com/2010/04/21/how-to-load-a-custom-rom-on-the-htc-hd2/
I've followed thru all the step but now my phone can't boot up properly.
It loads up to the htc logo, but nothing goes on after that. Just the logo, without the quietly brilliant animation coming out.
i was sing this rom
forum.xda-developers.com/showthread.php?t=721438
Anyone here knows what's up with my phone??
I m seriously in panic mode!!!
I've looked thru the Q & A posted above me.. but there is nothing related.. Only post that is similar doesn't help mi in my case..
I've tried hard resetting but it still wouldn't start..
sn3nk said:
I've looked thru the Q & A posted above me.. but there is nothing related.. Only post that is similar doesn't help mi in my case..
I've tried hard resetting but it still wouldn't start..
Click to expand...
Click to collapse
Did you flash the correct radio that the Chef says should go with the ROM?
I m using this build.
Aug 30▐ VBNROM *CLARITY* RC 7 ▐ ANDROID Compatible▐ Builds 23134/23569
if by chef u meant the creator of the build, i believe that i m using the correct build for hd2..
I don't get what you meant by radio though... I apologise for my noobish behaviour
that rom uses the tmous rom as a base meaning it won't boot if you don't have a x.xx.50.x version radio, which you don't have, cos you have a regular hd2, not a tmous hd2.
find the radio thread in rom development, pick a radio with ..50.. in the version, and flash it exactly like flashing a rom.
go for 2.07.50.x radio or above.
since your phone won't boot, you will have to enter bootloader manually, and run the flash from there.
Thanks SamSamuel!
With your help i managed to do a manual Bootloader screen. Now i m downloading another ROM and Radio..
I found the Radio thread.. but the mega download ain't working properly for now.. So it will take some time to download the radio..
I'm downloading Radio_2_10_50_19_2.zip for the radio..
So.. just asking. I should just run the files inside the radio while my hd2 is in the bootloader screen? after that, my phone will be back to normal and i can proceed to flash to a new ROM right??
Many thanks in advance!
once you flash teh radio the phone will boot anyway to teh rom you already flashed, no need to flash a new rom. Its already there just waiting for teh radio before it will start.
You flash radios exactly the same as you flash roms.
radio + customruu in a folder
run customruu
Many Thanks bro!!!
Hi everybody,
Well yesterday i figured out that i could update my rom.
I started to look the Arthemis thread to find out what's new.
I saw SSPL and the 3.14 rom.
I downloaded the 3.14 rom and i installed it.After that i took the SSPL and the Arthemis V42 Rom and tried to install it. No success.
After that i took the energy rom to install it and it works but i still have the 3.14 rom display instead of the energy rom.
So right now i'm a little bit stuck cause i don't know what to do
Here's my specs:
SPL-2.08.HSPL 8G XE
Systeme version : 5.2.21684 (21684.5.3.10)
Manila version : 2.5.20191914.0
Rom version: 09 November 2010 FRE
Radio Version: 2.12.50.02_2
Protocol Version : 15.40.50.07U
So i'm asking you guys a little help please to put energy or new arthemis back in my phone.
Thanks for your help
Ps: ( I need help on how to put my phone back to normal i'm a little confused about SSPL and the 3.14 rom :s )
run Task29
! Read Edit 2 down below first !
Well, you could try to run Task29. That will purge your ROM and leaves it nice and perfectly clean for another ROM without the risk of residua in the memory.
You can find it here:
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
You will need to install a radio ROM after that, too. But having the memory wiped clean this way between installs is a good way to avoid trouble.
ThoroSOE
Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh. Copy that to your freshly formattet memory card and bring up your phone to the bootloader screen (power up with volume down pressed). It will then prompt to install the original ROM. This will overwrite HSPL and any ROM and Radio ROM you installed.
Edit 2: It could be that with ROM 3.14 the SPL is too new for HSPL! Mind that it just supports specific SPL versions! Check that! I think 3.14 has an 3.XX SPL version.
Before I could install HSPL properly I had to downgrade my ROM with an older original one to get the proper SPL (see Edit 1).
Thanks i try it now ill let you know.
Sir you don't need to look fare for your problem.
The problem is that stock ROM 3.14 isn't compatible with HSPL!!
And about Artemis ROM; I suggest you to take your time and read the "How to install?" At the Artemis ROM.
If you did it; you was ale to see you need to remove HSPL before install stock ROM 3.14!
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
OcmyHtc said:
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
Click to expand...
Click to collapse
Sir I don't see how I can write a better step by step guide on how to do it.
I will suggest you to read these post's.
If you have a unbranded device:
http://forum.xda-developers.com/showpost.php?p=8776196&postcount=26465
Ore this in case you have a branded device:
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
PS; if you have random questions, follow the link at my signature "Q&A: How? Where? what? Ideas? [New Users?]"
And if your have other questions, just ask. but it is important to read and follow the institutions.
Thanks again kurt-willems for your answer.
So after reading the entire post on how to flash arthemis rom i did all the steps but i am stuck at the step 7
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
I did all as it is explained in the thread my SSPL is good etc but when i launch SSPL + arthemis nbh, i got into the bootloader.
I tried like 5 times and i start to be angry.
So if you can help me it would be great.
Thanks
Ok i dont have nerves to do it again, can you guys just simply explain me how to uninstall SPL 3.03 and just install HSPL 2 and put a simple rom cause right now my phone don't work because of that.
Thanks you guys for reading me.
If you will install Artemis ROM I suggest you to use v42.0!
I/we know that flashing over SSPL isn't alway's easy (it will not start alway's)
but some important things to know is to deactivate your Anti-Virus; and creating a file with only the rom.nbh and SSPL_RUU in it nothing els!
(PS; Artemis ROM v42.0 starts better than previous v41.0 (own experience))
But if you will return to previous settings;
Reinstall a previous stock ROM ex 1.66 ore 1.47 (depending of you're aria)
Reinstall HSPL use HSPL3_RUN.exe fore this.
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
OcmyHtc said:
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
Click to expand...
Click to collapse
I know this event sir, I have guide lot of users in this part. When you are on the bootlouder screen and at the bottom there is no mention of "usb" the installation will fail.
Its very important to be sure that your device is connect (control it in Active sync), Anti-Virus is turn off, the folder have only the rom.nbh and the SSPL_RUN (nothing more) in it, changing from USB port if you can.
And don't double click on SSPL_RUU fore run, but left click on it and select run ass administrator.
Lately I guide a other user on this and it have takes him 5 tray's
Ow, to be sure you have a good SSPL_RUU version takes mine: Download
Thanks but right now i just want one thing.. My phone to work.
I downloaded V42 and still the same problem.
I downloaded stock rom V1.93 from orange and i can't install it , don't ask me why.
So right now basically my phone is on the stock 3.14 rom and i don't know what to do to put an old rom and to flash to a energy rom with HSPL 3.
Seriously this all thing start to piss me off , no offence guys you making good stuff but sometimes its just to risky to flash.
I followed all the steps one by one and right now i got a useless phone in my hands.
I'm searching a way to get an old rom to be installed and desinstall SSPL.
If you can help me it would be great , im still searching.
You can flash a older stock ROM over SD.
Read my first post. There you can read how to reset to stock (Edit 1). Use an older stock ROM for a proper SPL that works with HSPL.
Install HSPL as instructed in the "how to flash everything" thread.
Run Task29 (see my first post)
Install Radio ROM with x.50.x in it from desktop via Active Sync (you need a Custom_RUU.nbh and the desired Radio ROM).
Install the main ROM you like, f.e. Energy ROM (that's what I use) normally from destop via Active Sync (Energy is one package that works like an official update).
Never had any problems with this way, never needed more than one try.
Hey ThoroSOE i rode Edit 1 and Edit 2.
I hope its not that much to ask but, could you give me a WWE rom like you said in Edit 1 to put it in the SD card ?
It would be really appreciated.
I'm downloading right now a official orange rom (1.66) but i tried installing the 1.43 and it didnt worked, thats why i'm asking you the question for a WWE rom to accomplish what u told me on Edit 1.
Thanks you guys for helping me.
Ok i'm trying this right now Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh
With the 1.66 official rom.
I will let you know.
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly? It must be FAT 32, 4092K - and better not be done with quick formatting.
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
kurt-willems said:
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Click to expand...
Click to collapse
As you can see in my post i already tried to install threw SD card.
When i enter in bootloader (vol down + boot the phone)
I have:
PB81100 HX BC
SPL- 3.03.0000 XE
So i have SSPL in my device.
ThoroSOE said:
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
I have the orange operator in france.I took the version 1.66 put it into the sd card like you said.
When i pressed Vol down + boot to go into bootloader i get the error message:
00028002
Not Allow
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - YES
in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly?
I format my SD card by the format option on the HTC leo.So i don't know if it's the good way to do it ?
It must be FAT 32, 4092K - and better not be done with quick formatting.
Click to expand...
Click to collapse
Please guys help me out i really don't know what do to anymore..
Hey Guys,
I know that there propably existed several threads about this topic, although I could not find one, which really helps me or I still wasn't sure what to do.
So I hope you can help me doing this successfully and getting rid of my hd2 ...
I flashed a Nexus ROM, have Magldr on it and try to get my phone back in Windows Mobile 6.5 for guarantie issues.
So first I know that I have to get the right ROM ... I have read that this would work via htc.com but to be honest, I just find there ROM Upgrades, no original Stock ROMS to download. TO mention, I am looking for the German Stock ROM.
My next question is, if everything will be gone when flashing?! ... MAGLDR,HSPL ... that stuff?
I just downloaded an upgrade ROM from HTC which is working with my S/N off the phone, but it is an .exe file. I can install that, while plugging my phone to my laptop, or I just unrar that .exe and get several files. One of that is .ruu ...
I have read in another thread that this file is to rename. After that I should put it on my sd Card and flash that. Is that right? I am not quite sure about unrar an .exe file and getting so much files, while just using the .ruu ...
I hope that someone takes a little bit of time and answers the questions. Would be very kind. Looking forward to some replys ...
Thanks a lot in advance
First of all, congratulations to your first post.
See post #2 of one of these threads:
http://forum.xda-developers.com/showthread.php?t=1170691
http://forum.xda-developers.com/showthread.php?t=1177771
http://forum.xda-developers.com/showthread.php?p=15937389
thanks a lot.
So one question remaining ... As is said I just can download ROM Upgrades but not the original stock ROM ... is that okay, does that work?
ROM Upgrade means full original STOCK ROM.
Done everything as described.
First Update my Phone froze ... I started it again
Second attempt:
LEOIMG.nbh FAIl
the rest is listed with "ok"
RUU_Wallpaper1 FAIL
=> Update Terminate / Update Fail written on the screen ..
what now ?
Your HD2 shouldn't do that.
What are the warrenty issues you wanted your HD2 flashed back to WM6?
You can try to install HSPL and do a Task29 before you start the procedure again.
Well it froze all the time, when activating wifi or mobile data ... when activating that it gets kind of warm in the back of sd card ... I guess it is the cpu .. so I want to send it back where I bought it, because it is an hardware issue in my opinion ... tried three different softwares (win mobile, android desire and nexus) ...
Well is there any guide of reinstalling hspl and doing a task29, whatever that is
Search function is a very usefull tool...
Maybe you will have a look here: http://forum.xda-developers.com/showthread.php?t=713977
Yes I know, I am sorry ... started to use that ....
Installed HSPL new, did a task29
followed the instructions again ... the same ...
the suspect thing is that every try of the new rom anohter thing fails ...
this time OS failed, the rest worked .... last time wallpaper1 failed, the next time wallpaper 1 worked, but two failed ... I don't know what to do ...
And it is totaly correct that I just put the LEOIMG.nbh on the sd card ?
What are my options ... talking to HTC support?
Kind of despered now
Yes, to copy RUU_signed.nbh file to SD and then to rename it to LEOIMG.nbh is the only thing you have to do.
Have you tried another SD?
Have you tried to redownload the ROM file? Maybe your file is corrupted.
Have you removed HSPL before you tried to flash?
Is your battery fully charged?
Well it worked finally ...
I started the flash and put the phone in the fridge => ... flash successfull ... I gues that is the evidence that there is a serious hardware issue ...
thanks for your great help and taking time ... now I can send it back to Amazon ...