So here is the deal - earlier I could connect my SGS2 to PC with USB Debbuging turned on, and nothing poped up and I could use storage and sd card on PC and at the same time on the phone, like open it with some file explorer, and install apps when still connected to PC... Sound awesome, because now there is this - When I am in USB debbuging and connected to PC, it cant find storages, so I have to disable debugging, and there pops up this USB Mass Storage when i connect the cable. When it is connected to PC, I cant access files on the phone in that moment.... So what is wrong??
Will be pleased for all suggestions..
Thanks
Retko85 said:
So here is the deal - earlier I could connect my SGS2 to PC with USB Debbuging turned on, and nothing poped up and I could use storage and sd card on PC and at the same time on the phone, like open it with some file explorer, and install apps when still connected to PC... Sound awesome, because now there is this - When I am in USB debbuging and connected to PC, it cant find storages, so I have to disable debugging, and there pops up this USB Mass Storage when i connect the cable. When it is connected to PC, I cant access files on the phone in that moment.... So what is wrong??
Will be pleased for all suggestions..
Thanks
Click to expand...
Click to collapse
Android Manager Wifi -=or=- Air Droid -=or=- if the rom you're running has working FTP you can use that ^^
Remove the drivers
Retko85 said:
So here is the deal - earlier I could connect my SGS2 to PC with USB Debbuging turned on, and nothing poped up and I could use storage and sd card on PC and at the same time on the phone, like open it with some file explorer, and install apps when still connected to PC... Sound awesome, because now there is this - When I am in USB debbuging and connected to PC, it cant find storages, so I have to disable debugging, and there pops up this USB Mass Storage when i connect the cable. When it is connected to PC, I cant access files on the phone in that moment.... So what is wrong??
Will be pleased for all suggestions..
Thanks
Click to expand...
Click to collapse
When you connect to computer, dont do it in Debugging mode. If you change it windows (forcing MTP) dont like that. So it will require you to remove phone and reboot. But try the following also
delete all old drivers and remove them in registry. (if needed check the below link)
http://forum.xda-developers.com/showthread.php?t=1882942
Still not working go to device manger "type it in start"
Go to View
Select Hidden Driver
Go To Non_Plug and Play Drivers
Right Click on Hardware Policy Driver
Go To Driver Tab,
Stop this device
and Disable it
Restart Windows ( unplug phone first, disable network card also)
Disable WiFi or network card, (double tap)
Plug in Phone
Allow windows to load the drivers on your phone.
(don't stop this at all)
Look for phone.
Later you can add updated drivers if you would like. Remember windows keeps all old drivers, even if its jacked up. PnP will still run.
This works on Vista and above. haven't tested it on XP.
IMPORTANT
U must re-enable the change to the device manager after this, or each time you reboot it will reload the drivers.
Related
I'm trying on my work comp and it's says un known hardware... Is it fusion?. Im on mass storage
Vibrant Bionix
running fusion here..
This has happened only on my work computer and not my laptop at home.
go to settings / applications / development and turn off USB debugging. Then go to USB settings and set it to ASk On connection. Turn USB Debugging back on.
Now when you plug in it is gonna ask you how you want to connect. I believe you select mass storage and your computer should recognize. Then you mount your SD to your computer.
This is what I did to get it to connect to my work computer. Afterwards i reverted my settings back to normal and my phone connects to my laptop.
Hope that works.
your pc is probably not able to download the drivers....
ELStiko said:
running fusion here..
This has happened only on my work computer and not my laptop at home.
go to settings / applications / development and turn off USB debugging. Then go to USB settings and set it to ASk On connection. Turn USB Debugging back on.
Now when you plug in it is gonna ask you how you want to connect. I believe you select mass storage and your computer should recognize. Then you mount your SD to your computer.
This is what I did to get it to connect to my work computer. Afterwards i reverted my settings back to normal and my phone connects to my laptop.
Hope that works.
Click to expand...
Click to collapse
Sweet man! You had the exact same problem lol. I'm not at work anymore
But I'm excited to go in now x) il let ya know man thanks tons in advance.
btw what is mock locations all about?
s15274n said:
your pc is probably not able to download the drivers....
Click to expand...
Click to collapse
You nailed it. Thanks man. Anyway around it?.. The net is locked down pretty tight so probably not huh?
Vibrant Bionix
Download the drivers from another pc and attach it via a usb storage drive and transfer it to your pc and install. (windows should already have the drivers pre-installed for USB drives).
Hey.
I just got this phone, and man I cant get to USB mass storage!!
I got it to work once, but until then it is not working at all......
The USB icon keeps going on and off on the phone and I dont know how to fix this.....
Any help please?
awaisuk said:
Hey.
I just got this phone, and man I cant get to USB mass storage!!
I got it to work once, but until then it is not working at all......
The USB icon keeps going on and off on the phone and I dont know how to fix this.....
Any help please?
Click to expand...
Click to collapse
If you are on Windows: Samsung drivers installed?
Did you try different USB port?
Is USB debugging enabled? Settings->Applications->Development
What are the USB settings on the phone? Settings->Applications->USB settings
Mass storage mode doesn't work for me on Win 7 x64 I just use the media player setting and it works the same way as mass storage should.
It works for me just fine. One time it did do the flickering USB icon thing, but that turned out to be because the cable that I was using was going bad. It sounds like this may be what's going on in your case?
I clipped this from a post I made a few months ago...
Stresa said:
For those of you having a problem with Windows 7 recognizing your Vibrant ... here is how I fixed it on my system.
*Note: You do not need to load any special USB drivers for your phone to be recognized in Mass Storage mode in Windows 7.
*Warning: You follow these instructions at your own risk ... no screaming at me if you try it and something gets screwed up!
1) Navigate your way into the Device Manager / Universal Serial Bus Controller
2) Uninstall the device(s) "USB Root Hub" (My system had 2 listed)
3) You will lose mouse and keyboard control (because you just removed the USB Hubs)
4) Reset your PC and allow Windows to boot normally.
5) Go back to the device manager and wait for all of the "!" marks to go away as windows re-installs the USB Hubs and reinitializes all of your devices.
6) Make sure your Vibrant is in mass storage mode and has USB debugging OFF
7) Plug in your Vibrant via the USB cable and be amazed as windows recognizes your device and assigns the drive letters. After you select the mount option on your phone you will have normal access via windows explorer.
Hope this helps some of you out there !!!
~Stresa
Click to expand...
Click to collapse
Sent from Samsung Vibrant
Thanks for that I tried, but I still cant get anything to work!!
So frustrating.....whats wrong with this?
With the new ICS firmware (and I don't know if its all ICS) you need to turn off debug in order to use Mass Storage.
Is there any application or other way around this? It gets a little annoying to always have to do this.
Titanium backup needs debugging on for some of my apps and if not using mass storage mode the phone connects via MTP mode which is very slow
I would willingly pay for an app/widget that does the following
Once pressed turns off debug and asks you to plug in USB for mass storage.
Prior to disconnecting the USB cable you select to disconnect which then un-mounts the storage and then turns back on debug
figure should be easy to make for some dev out there
Anyone have an idea on this?
Guess no one out there has an idea
Hmm, for me the only difference running ICS and checking or unchecking dev option/USB debugging is whether or not I can manually unmount the phone in Windows, it always connects as a media device and I have no otion to turn that off.
Mediamonkey takes forever when my phone is connected as MTP (say 15 minutes to build the sync list?), and the only real option to use it to send fresh music to my phone WAS connecting it as mass storage (15 SECONDS for the sync list).
So I would really really appreciate any hints on how to get my S2 to connect as mass storage. It's the official ROM rooted using Chainfires respective kernel.
Ciddy said:
Hmm, for me the only difference running ICS and checking or unchecking dev option/USB debugging is whether or not I can manually unmount the phone in Windows, it always connects as a media device and I have no otion to turn that off.
Mediamonkey takes forever when my phone is connected as MTP (say 15 minutes to build the sync list?), and the only real option to use it to send fresh music to my phone WAS connecting it as mass storage (15 SECONDS for the sync list).
So I would really really appreciate any hints on how to get my S2 to connect as mass storage. It's the official ROM rooted using Chainfires respective kernel.
Click to expand...
Click to collapse
Or at least an app that selects and deselects the option automatically as I mention above.
Sure a dev somewhere can make lots of money for an app like this
Solution found (works for me);
http://www.jayceooi.com/2012/03/14/...storage-on-android-4-0-ics-samsung-galaxy-s2/
How to enable USB mass storage on Android 4.0 ICS Samsung Galaxy S2?
Bring up Settings.
Click More… (under Wireless and network).
Then select USB utilities ~ Set USB cable connection mode.
Select Connect storage to PC then.
Connect USB cable from phone to PC.
Select Turn on USB storage.
That’s all.
http://www.jayceooi.com/2012/03/14/...storage-on-android-4-0-ics-samsung-galaxy-s2/
Ciddy said:
Solution found (works for me);
http://www.jayceooi.com/2012/03/14/...storage-on-android-4-0-ics-samsung-galaxy-s2/
How to enable USB mass storage on Android 4.0 ICS Samsung Galaxy S2?
Bring up Settings.
Click More… (under Wireless and network).
Then select USB utilities ~ Set USB cable connection mode.
Select Connect storage to PC then.
Connect USB cable from phone to PC.
Select Turn on USB storage.
That’s all.
http://www.jayceooi.com/2012/03/14/...storage-on-android-4-0-ics-samsung-galaxy-s2/
Click to expand...
Click to collapse
Thanks for the info but I already knew this.Also you didnt need all these steps in gingerbread and previous software versions.
Also for people using USB debug this must be turned off before being able o do all of the above.
Im just saying an app can be made that does all of this with one click
Well, get onboard here, test and say if it works.
I have USB Debugging always on and I am currently running LP7 version of ICS.
When I plug in the the phone I get the Media Device (MTP) coming up on the phone - which is ticked.
In Windows Explorer (Windows XP) just below Control Panel (in the folders window) is a +GT-I9100. Clicking on the + I see a subfolder +Phone The items in this folder are the Internal SD of the phone.
From this I just drag and drop. I haven't noticed any difference in speed between this new way and the old method in Gingerbread.
fred_up said:
I have USB Debugging always on and I am currently running LP7 version of ICS.
When I plug in the the phone I get the Media Device (MTP) coming up on the phone - which is ticked.
In Windows Explorer (Windows XP) just below Control Panel (in the folders window) is a +GT-I9100. Clicking on the + I see a subfolder +Phone The items in this folder are the Internal SD of the phone.
From this I just drag and drop. I haven't noticed any difference in speed between this new way and the old method in Gingerbread.
Click to expand...
Click to collapse
Try transferring a large file you will see the difference between transfer speeds in MTP mode and mass storage.
Also with MTP you can only do one thing at a time. For example let's say you are transferring files. While doing that you want to erase something else. It will wait for the original transfer to finish prior to starting
VAXXi said:
Well, get onboard here, test and say if it works.
Click to expand...
Click to collapse
But will this work even with debug on?
Yes. As mentioned in the linked post:
- connect cable
- classic "usb connected" notification appears in notification bar with option to do usb mount
- adb available.
Doesn't like my Mac either
When connecting my galaxy s2, I get the attached error.
fred_up said:
I have USB Debugging always on and I am currently running LP7 version of ICS.
When I plug in the the phone I get the Media Device (MTP) coming up on the phone - which is ticked.
In Windows Explorer (Windows XP) just below Control Panel (in the folders window) is a +GT-I9100. Clicking on the + I see a subfolder +Phone The items in this folder are the Internal SD of the phone.
From this I just drag and drop. I haven't noticed any difference in speed between this new way and the old method in Gingerbread.
Click to expand...
Click to collapse
MTP wont even work properly on my Windows 7 machine. It refuses to update the explorer process as long as the phone is plugged in. So navigating the phone means a lot of plugging and unplugging to get anything out of it.
Changing to UMS means my 2 devices (Internal SD and External SD) are visisble right away, but sadly are not displayed with any storage bars underneath . As a result I can't access them anyway and the second my phone goes to standby it stops the "process".
So any help or hints how to get my damned phone to actually work and show the storage bars underneath is most welcomed.
Is there any way to access the internal storage through USB without using Huawei's HiSuite program?
I would expect standard mtp or ptp to work, but when I select those options, the only drive that shows up is the HiSuite install "cd".
Thanks in advance!
have you enabled USB debugging on your phone?
If not enable please enable it and try again
I've enabled debugging, but that doesn't change anything.
Surely I should be able to use MTP without needing to enable debugging?
ofcorse, its standart for every phone, but sometimes user dont instal drivers, so we see device, but not storage.
what pc version, mac you use?
on windows, copmuter, right click, device manager, connect phone with pc, there need to be yellow alert simbol, pres on it, instal drivers etc, ofcorse, if you instal hisuite, you shuldnt be problems to connect phone without instaling drivers, because hisuite install all needet things, but who knows, maybe for tohers not working things liek for me
Make sure the drivers are correctly installed for your phone.
In my case, an antivirus software update was causing the MTP driver to malfunction. The yellow caution icon was activated when I went to the 'Connect Phone with PC' tab in the Device Manager (Windows Explorer / This PC + right click / Manage). I opened the antivirus program and it asked me to restart the PC, which I did. After restarting the PC, I connected my phone and I was able to see it as a removable device (a.k.a. external device, a.k.a USB device) and transfer files through Windows Explorer as usual. So, basically, make sure all the Windows Updates and antivirus updates are 'updated'. Best of luck.
My phone is not recognized by either my home or work pcs. I've googled and did the basics - enabled usb debugging, preferences set to file transfer. I've never had this problem with a phone before.
It will connect to a usb stick via adaptor so I can transfer files with a multi-step process. This is a pain.
thecdn said:
My phone is not recognized by either my home or work pcs. I've googled and did the basics - enabled usb debugging, preferences set to file transfer. I've never had this problem with a phone before.
It will connect to a usb stick via adaptor so I can transfer files with a multi-step process. This is a pain.
Click to expand...
Click to collapse
That's strange, either your port is damaged or you don't have drivers installed. I've heard if this happening on Windows 11, never had a problem on Linux
thecdn said:
My phone is not recognized by either my home or work pcs. I've googled and did the basics - enabled usb debugging, preferences set to file transfer. I've never had this problem with a phone before.
It will connect to a usb stick via adaptor so I can transfer files with a multi-step process. This is a pain.
Click to expand...
Click to collapse
Do you have the latest USB drivers installed?
Get the Google USB Driver | Android Studio | Android Developers
The Google USB Driver is required to perform adb debugging on Windows with Google devices.
developer.android.com
The drivers are installed. My home pc is what I used to unlock/root the phone.
When I look at Show Hidden Icons -> Safely Remove Hardware and Eject Media, there is an option to remove Pixel 6. Yet it doesn't display under File Explorer or XYplorer.
If I start up my Arch (linux) vm with VMware Workstation Pro under Removeable Devices there is an entry for Google Pixel 6 with the option to Connect (Disconnect from Host). The contents can be under Arch.
Have you tried different cables & different ports? Sometimes the cable is the problem for me.
Different cables/ports had no effect.
I've got the same issue, what's weird is I can move files with ADB but can't in Windows.
If you figure anything out please hit this back up?
First make sure you have a good usb cable.
Some cables are only made for charging.
Second install the USB drivers from Google.
If you can transfer files, but can not use ADB/Fastboot, then it is a driver issue.
vandyman said:
First make sure you have a good usb cable.
Some cables are only made for charging.
Second install the USB drivers from Google.
If you can transfer files, but can not use ADB/Fastboot, then it is a driver issue.
Click to expand...
Click to collapse
Cables/drivers are good. ADB/fastboot work fine it's the transferring of file/recognision of device in windows explorer that is the issue.
thecdn said:
it's the transferring of file/recognision of device in windows explorer that is the issue.
Click to expand...
Click to collapse
Switching from charging mode to file transfer mode in the Connected devices/USB menu should give you access to Android's internal storage from Windows. USB debugging or other Dev options aren't necessary.
I had this same problem. Connecting to pc would show connection options but they were all greyed out and the phone would only charge. I couldn't find any option in the standard settings to change this.
Eventually I found 'default usb configuration' in dev options. Default was set to 'charge only'. You can sort it from there.
edit to add: although re-reading op you may have tried this already.
I solved mine by setting to PTP mode then the PC started to recognize the phone connected
thecdn said:
My phone is not recognized by either my home or work pcs. I've googled and did the basics - enabled usb debugging, preferences set to file transfer. I've never had this problem with a phone before.
It will connect to a usb stick via adaptor so I can transfer files with a multi-step process. This is a pain.
Click to expand...
Click to collapse
It's the stupid Windows drivers. There is an .inf file you need to either edit or delete but I forgot which. Might be wpdmtp.inf in the windows directory, right click and install. You might have to uninstall the driver in device manager first, the one with the exclamation mark if it's there. Sorry it's been about 3 or 4 years since I have done this but it's most likely a driver issue.
Mike Tanner said:
I solved mine by setting to PTP mode then the PC started to recognize the phone connected
Click to expand...
Click to collapse
I'm checking this on my work pc. It gives me access to DCIM and Pictures folders only. Which give me something to work with at least.
thecdn said:
I'm checking this on my work pc. It gives me access to DCIM and Pictures folders only. Which give me something to work with at least.
Click to expand...
Click to collapse
I agree about drivers, that they're either corrupted or incomplete. What's going on in Windows Device Manager when the phone is in a certain state?
During normal operation I assume the general purpose driver is always visible.
Device Manager > Portable Devices > Pixel 6
In fastboot mode with USB debugging enabled, is this driver showing up?
Device Manager > Android Device > Android Bootloader Interface
While Android is running with USB debugging enabled, do you see an ADB driver (the daemon may need to be started)?
Device Manager > Android Device > Android Composite ADB Interface