Related
Go easy on me guys I tried looking for the answers for the last 3-4 hours. ;/
I already rooted my phone using this guide
http://forum.xda-developers.com/showthread.php?t=1310115
and unlocked the bootloaded as well using the htcdev website.
And I would like to install beastmod. I went through the faq and the whole bit but still have questions and still a tad bit confused. I even went online to google and search the forum.
I know this is the official thread for beast mod
http://forum.xda-developers.com/showthread.php?t=1313017?referrerid=922386
I have unlocked the boot loader, do I need to flash the kernel still? This is where I am confuse.
I read the
"FAQ for the HTC Amaze 4G. Read Frequently Asked Questions before you post a question!"
and
"HTC AMAZE ROM Bible - Everything you need to know"
I'm coming from a Blackberry which I used for almost 6 years.
I'm just kinda stumped right now as far as steps I need to take if any prior to installing Beastmod. I have never installed a rom before but I figure I ask the questions above before attempting anything.
Forgive me if i'm wrong everyone, but i think the Kernel is already cooked into the ROM. So no need for flashing a kernel after flashing the ROM.
I too am new to the HTC Amaze. I'm coming from a Samsung Galaxy S2 and was also running BeastMod v4.0. And God is this a pain in the butt to root. Last HTC phone i had was a HTC TouchPro. WinMo6 ftl
Really? What made you go to the Amaze? I came in T Mobile store thinking I was going to walk out with the S2 but after 3 days I ended up leaving with the Amaze, just seemed like a better phone.
Have you installed beastmod on your phone going?
Oh i still have my SGS2, just got really bored with it dev wise. Too many Roms with pretty much the same things. BeastMod was really the only ROM that stood out. Just got my Amaze last night, so i haven't even been able to try to root it yet. I've been reading alot of tutorials, and it sounds fairly easy....just alot of steps than what i'm used to. But so far, i'm really liking the Amaze over the SGS2. Sense and the camera are a WIN!
As far as I can tell from reading the official BeastMod first post you do need to flash the kernel.
That message below is right in the change log.
"**FULL WIPE REQUIRED FOR v2.2.0 and Kernel Flash**
YES!
You must flash the Kernal with Kernal Flasher
We do not have S-off... Security Off
So Kernals can not be buried in the rom they have to be seperate. We do not anticipate S-off any time soon. Since bootoader is unlocked we can use ADB to push the kernal. VIOLA! for us mere mortals the mighty DEV have created a tool that does it for us!
I just want to help. I find it hard to believe you did not see this in like every Xboarder ROM thread there is! Follow instructions on front page of the ROMs. They are explicit.
Feel free to PM if you have issues though. Amaze is my first Android phone and I cut my teeth with it so I should be a good resource. Cheers
I still do not see that thread, I just looked. I;ve spent a few hours on this but still determined to do it.
nguyendqh said:
As far as I can tell from reading the official BeastMod first post you do need to flash the kernel.
That message below is right in the change log.
"**FULL WIPE REQUIRED FOR v2.2.0 and Kernel Flash**
Click to expand...
Click to collapse
Now thats really confusing. But i guess we'd have to go with what the latest changelog says.
babymatteo said:
Now thats really confusing. But i guess we'd have to go with what the latest changelog says.
Click to expand...
Click to collapse
How do you think I feel?
Alright so fact, need to flash kernel 1st.
Alright I found this
http://forum.xda-developers.com/showthread.php?t=1328141
Which I assume its the correct one.
I am confused at number 4,
4. Place the boot.img that you want to be flashed in the Kernel-Here folder.
Which boot.img? The one thats included in beastmod?
and 5
5. Make sure adb is enabled on your phone via settings
adb?
You always flash the ROM first then the Kernel.
babymatteo said:
You always flash the ROM first then the Kernel.
Click to expand...
Click to collapse
I don't know what you mean by that could you be more specific please?
Do you see on the BeastMod thread where you downloaded the ROM?
Underneath it, it says "Kernel for 2.2.0" that is the boot.img download it.
As for ADB under settings this is just referring to "USB debugging" turned on.
Put the boot.img in the "Kernel Here" folder which is in the "Kernal Flash Tool v3".
Then after run the flash.bat (windows) or flash.sh(mac) file in that tool folder.
That should do it.
---------- Post added at 05:54 PM ---------- Previous post was at 05:53 PM ----------
F9zSlavik said:
I don't know what you mean by that could you be more specific please?
Click to expand...
Click to collapse
And where are you still having problems?
That's what I thought but I wanted to make sure that what I needed to do, I was semi sure but I do not want to brick my phone by doing a step I was not suppose to.
ADB is a confusing term debugging makes a lot more sense and that is what I figured but I did not see any reference between adb and debugging mode.
So after following these steps, this will install beastmod?
I saved my contacts, sms, and call logs using a program called supa back up, they were saved on my sd card.
Anything else I need to know?
And thank yo for taking the time to fill in the gaps I really do appreciate and hopefully this thread will help anyone else that was confused as I was.
UPDATE
Does the phone need to be in any specific mode? I have it as Disk Drive and after running the bat I get a msg saying error device not found" and "waiting for device"
F9zSlavik said:
That's what I thought but I wanted to make sure that what I needed to do, I was semi sure but I do not want to brick my phone by doing a step I was not suppose to.
ADB is a confusing term debugging makes a lot more sense and that is what I figured but I did not see any reference between adb and debugging mode.
So after following these steps, this will install beastmod?
I saved my contacts, sms, and call logs using a program called supa back up, they were saved on my sd card.
Anything else I need to know?
And thank yo for taking the time to fill in the gaps I really do appreciate and hopefully this thread will help anyone else that was confused as I was.
UPDATE
Does the phone need to be in any specific mode? I have it as Disk Drive and after running the bat I get a msg saying error device not found" and "waiting for device"
Click to expand...
Click to collapse
The boot.img is the kernel. Flashing it doesn't mean you have BeastMod.
You need to download BeastMod and flash it through recovery to get BeastMod on your phone.
Remember to wipe data, wipe dalvik and wipe cache.
After you flash the ROM then you flash the kernel using the tool.
Sometimes the kernel needs to flashed twice to fix any issues you might have after flashing a ROM and new kernel.
First boot takes longer and after first boot, once the phone settles, reboot again.
Your phone needs to be in "charge only" and not "disk drive" for ADB to recognize it.
do not worry about bricking your phone, you actually cant since there is no s-off yet + htc hasnt released much of the sources so pretty much ur phone is locked and cant brick it.
OK I did the flash.bat, phone restarted.
So in order to install the beastmod, do I copy the beastmod file I downloaded into the sdcard? Then reboot and install it through recover?
How do I wipe the data?
F9zSlavik said:
OK I did the flash.bat, phone restarted.
So in order to install the beastmod, do I copy the beastmod file I downloaded into the sdcard? Then reboot and install it through recover?
How do I wipe the data?
Click to expand...
Click to collapse
Yes. Copy the zip you downloaded on to your sdcard then reboot into recovery.
Volume down + power.
Once in recovery you should have options.
First do a backup.
Then look for the options to wipe data/factory reset.
Then usually wipe cache and wipe dalvik are under the "advanced" option.
I do believe you have a custom recovery so your options might be different.
Navigate around to find the options to wipe all your data.
After you wipe then you navigate to "apply update from sdcard" and then "choose zip from sdcard" select BeastMod and flash it.
You should be ready to go.
Sorry my instructions aren't specific as I haven't rooted my Amaze or flashed a custom ROM.
So I don't know what your recovery looks like.
I am going off my experience with 7 MT4Gs and 2 Sensations.
The steps should be pretty basic when flashing a ROM anyway.
I understand that for someone who is new at this reading the instructions might seem complicated at times.
I'm just trying my best to reword those instructions for you and put it steps you can understand.
Alright, final question, do I need to make a folder for the files that in the zip folder or do I just copy them to the sdcard2 directory as the way its shown when you un zip the beastmod.zip file?
F9zSlavik said:
Alright, final question, do I need to make a folder for the files that in the zip folder or do I just copy them to the sdcard2 directory as the way its shown when you un zip the beastmod.zip file?
Click to expand...
Click to collapse
Don't unzip it. Just place the entire thing on your sdcard.
If you're flashing the ROM through recovery you should not need to unzip it.
It's just placing it on your SDcard and flashing it.
ooooh
I will try it right now then.
OK
Off topic question, Cynogen is a mod like Beastmod correct?
UPDATE
Alright its been flashed yay it works lol. Do I need to flash the kernel again? I did it before, do i have to do it afterwards as well, you mention that earlier.
Boy it looks so different...... so the Sense theme is still there but just hidden in some sort of way? Will they ever disable the security on this phone or is that permanent?
Dude if the admin are smart they will PIN this thread. I am a computer guy I fix them for a living mod the etc and damm this was a pain in the ass. The information is there but its missing certain details and its scattered, I searched around and sort of has the jist of it but honestly they should make a faq on how to more or less how its detailed in this thread, would save a lot of time and effort.
This forum is so awesome! lol
This is going to need some getting use to....
Any advice on what to do next? lol Like I said this is the 1st time I've own a phone that is not a blackberry...
Was running NRG GB just fine. When giving the phone to the wife I decided to upgrade to ICS. Used CWM to wipe data, cache, etc, and installed, got freeze on HTC logo. Started using Superwipe before each try and also tried flashing several different kernels including the one inside the zip and the one included with the amaze stock kernel flasher. Now the best I can get is 5 seconds into the Energy spinning rings logo before a 5s freeze and reboot.
The only thing I haven't tried is firmware; I've seen references to "find it on the forums" but copious forum and google searches don't seem to lead to the ICS firmware itself. Can anyone help with that or point out what I'm forgetting?
In the meantime I will try installing the ICS stock ROM first and see where that gets me.
ten6 said:
Was running NRG GB just fine. When giving the phone to the wife I decided to upgrade to ICS. Used CWM to wipe data, cache, etc, and installed, got freeze on HTC logo. Started using Superwipe before each try and also tried flashing several different kernels including the one inside the zip and the one included with the amaze stock kernel flasher. Now the best I can get is 5 seconds into the Energy spinning rings logo before a 5s freeze and reboot.
The only thing I haven't tried is firmware; I've seen references to "find it on the forums" but copious forum and google searches don't seem to lead to the ICS firmware itself. Can anyone help with that or point out what I'm forgetting?
In the meantime I will try installing the ICS stock ROM first and see where that gets me.
Click to expand...
Click to collapse
Do just that, remember to lock your bootloader if you're s-on and yes, jumping to an ICS rom without updating your device caused the bootloop.
Dark Nightmare said:
Do just that, remember to lock your bootloader if you're s-on and yes, jumping to an ICS rom without updating your device caused the bootloop.
Click to expand...
Click to collapse
Thanks for the reply! I'm downloading PH85IMG_RUBY_ICS_35_S_TMOUS_2.14.531.3_Radio_1.14.550L.17DC_30.78.550L.15_release_259626_signed.zip from filefactory, it's taking forever. Am I flashing this with CWM? Or should I be downloading a GB factory ROM and using that instead, then re-locking the bootloader and trying to update over the air?
ten6 said:
Thanks for the reply! I'm downloading PH85IMG_RUBY_ICS_35_S_TMOUS_2.14.531.3_Radio_1.14.550L.17DC_30.78.550L.15_release_259626_signed.zip from filefactory, it's taking forever. Am I flashing this with CWM? Or should I be downloading a GB factory ROM and using that instead, then re-locking the bootloader and trying to update over the air?
Click to expand...
Click to collapse
Don't download that one, it has issues, hold up, I'll give you a link to the most recent file.
Here, get this: http://d-h.st/3VD
Download speed should be faster as well. rename it PH85IMG and place it on your sd card after you relock your bootloader, then boot into bootloader, it's gonna detect the file and ask you if you wanna update, follow the on screen instructions to update, voila! Follow the basics to install the new energy rom.
It's almost as tho NO One reads anymore. It's actually getting kinda ridiculous how many times the same issue is gonna be asked.
I know this post isn't very helpful but I'm sure most of the recognized/senior/not noobs members are getting frustrated.
~~~~~~~~~~~~~~~~~~~~~~~~
It's Better To Fail At Originality
Than To Succeed In Imitation.
-Mighty Healthy
Click to expand...
Click to collapse
Double0EK said:
It's almost as tho NO One reads anymore. It's actually getting kinda ridiculous how many times the same issue is gonna be asked.
I know this post isn't very helpful but I'm sure most of the recognized/senior/not noobs members are getting frustrated.
~~~~~~~~~~~~~~~~~~~~~~~~
Click to expand...
Click to collapse
It is useful, I fully agree with you, it's like we come here to answer the same questions over and over, but I'm just trying to be nice, cause I usually just say, read the amaze bible, but then they go and do something even more noobish, so to avoid the tear jerks I just give the basic info, though I'm fading away slowly.
Thanks'd for the link and the help. I was gonna get mad about being called a noob who can't read, but I guess it's a small price to pay for instant, free help. Keep on rockin' XDA.
I came across this issue. As earlier posts said, install the new ICS update. The partitions were messed up and the ruu will clean it up.
ten6 said:
Thanks'd for the link and the help. I was gonna get mad about being called a noob who can't read, but I guess it's a small price to pay for instant, free help. Keep on rockin' XDA.
Click to expand...
Click to collapse
Lol, never pointed fingers buddy, so calm down.
Maybe I should create a new topic but my issue is similar to this one except for the fact that I read quite a lot and tried quite a few things.
My situation is that I made a backup with cwm only booted not flashed so I have the 100% stock backed up, after this I flashed cwm and tried to install the Energy rom based on ics and that was my mistake as I used to be on a Nexus device I didn't have to worry about this.
So I got stuck on a bootloop and tried factory reset/wiping everything, tried to reinstall a stock ROM (t-mobile one as I only found a .exe for the videotron one and I did not feel like exploring the exe as I am a Linux user) by relocking bootloader and using the HTC method, tried to install manually the stock Kernel with Energy ROM using adb and fastboot commands, tried to restore my backup but nothing seems to work, I'm still bootlooping.
Is-it possible to s-off without a regular adb access (only the cwm adb access)? And would s-off allow me to flash anything as I wish? Is there a way to have any ROM working on my device? (i know the answer is yes to the last one, at least )
Thanks!
Edited: I don't know why I even replied to the post above this.
Read more you'll find out what you're doing wrong.
~~~~~~~~~~~~~~~~~~~~~~~~
It's Better To Fail At Originality
Than To Succeed In Imitation.
-Mighty Healthy
Click to expand...
Click to collapse
Double0EK said:
Edited: I don't know why I even replied to the post above this.
Read more you'll find out what you're doing wrong.
~~~~~~~~~~~~~~~~~~~~~~~~
Click to expand...
Click to collapse
Maybe I'm a noob on this forum but it's far to be the first time I face a problem in software configuration/installation and I read quite enough (spent about five hours on xda, google, etc.) to say that you should at least help me a bit by linking me to a thread where I can find an answer.
I know my mistake was to install ics at first but now I flashed the stock recovery back, I relocked the bootloader via fastboot and put the file on the root of my sdcard renamed correctly that it be detected automaticly (and it apparently does install) but I still got the * bootloop.
I'm able to read a manual and to read the Amaze 4G bible four times to try to point out the detail I forgot. I made my homework and now it would only be nice from you that you help me a bit...
johnride said:
Maybe I'm a noob on this forum but it's far to be the first time I face a problem in software configuration/installation and I read quite enough (spent about five hours on xda, google, etc.) to say that you should at least help me a bit by linking me to a thread where I can find an answer.
I know my mistake was to install ics at first but now I flashed the stock recovery back, I relocked the bootloader via fastboot and put the file on the root of my sdcard renamed correctly that it be detected automaticly (and it apparently does install) but I still got the * bootloop.
I'm able to read a manual and to read the Amaze 4G bible four times to try to point out the detail I forgot. I made my homework and now it would only be nice from you that you help me a bit...
Click to expand...
Click to collapse
Okay okay, calm down, there's currently only one method of going about restoring your device since you're s-on and no you cannot s-off with just cwm adb, I think JB s-off method is only an exe file, never saw linux files anywhere on his site. Anyways, you have to use the GB exe for videotron and restore to stock via it then update to ics to use the most recent energy rom, BUT if you just want a working device, this is just an idea, though it should work fine, you can flash a custom recovery and flash the GB version of energy rom, you should be able to restore your backup as well, but you said you can't, which is odd, it may be because of the kernel not being flashable as since CWM cannot flash kernels while s-on, in which case I'd advise you to get 4EXT recovery and then try restoring your back once again, it should work fine since 4EXT can flash kernels while S-ON.
My two cents.
Well, 4ext doesn't works, apparently it flashes correctly but I can't boot in it so can't even try to restore my backup, s-off doesn't works from cwm and my device has to be booted to work with Videotron's exe (or I badly installed my drivers, I nerver understand properly the 899363 drivers per device I have to install for an android phone on Windows?)
Smells bad... I checked the 4ext's md5sum and it's alright, I took it from the fastboot installable img in direct dl from the thread in the Amaze bible.
Any idea?
Oh and there is a JB s-off executable for Linux on his site. After all I guess it is mostly adb commands?
johnride said:
Well, 4ext doesn't works, apparently it flashes correctly but I can't boot in it so can't even try to restore my backup, s-off doesn't works from cwm and my device has to be booted to work with Videotron's exe (or I badly installed my drivers, I nerver understand properly the 899363 drivers per device I have to install for an android phone on Windows?)
Smells bad... I checked the 4ext's md5sum and it's alright, I took it from the fastboot installable img in direct dl from the thread in the Amaze bible.
Any idea?
Oh and there is a JB s-off executable for Linux on his site. After all I guess it is mostly adb commands?
Click to expand...
Click to collapse
I got lost halfway through that post, after flashing a rom, if the kernel isn't flashed (reboots and does it automatically), then flash the kernel manually, should boot fine, does anyone ever really read anymore? This very issue both s-on and s-off has been answered more times today than I can count. If you read the details on JB's site, you'd see and know all you need to.
Right, I'va already flashed manually the stock kernel as sais in the NRGRom thread without success before my first post here, will look at different kernels.
johnride said:
Right, I'va already flashed manually the stock kernel as sais in the NRGRom thread without success before my first post here, will look at different kernels.
Click to expand...
Click to collapse
How did you go about flashing the kernel?
Sent from my SGH-T679 using xda app-developers app
There was a flash.sh file in the zip with the kernel, I couldn't run it normally as I can't boot but I went in cwm (maybe I should have used 4ext, don't think so for this part) executed the adb commands there were in the sh file with all filesystems mounted, rebooted into fastboot and flashed the kernel image. Maybe there are differents /system when in cwm and when booted on regular system... Will figure that out when I have time to spend on this, as soon as possible.
Thanks for all the cues!
Sent from my Nexus S
johnride said:
There was a flash.sh file in the zip with the kernel, I couldn't run it normally as I can't boot but I went in cwm (maybe I should have used 4ext, don't think so for this part) executed the adb commands there were in the sh file with all filesystems mounted, rebooted into fastboot and flashed the kernel image. Maybe there are differents /system when in cwm and when booted on regular system... Will figure that out when I have time to spend on this, as soon as possible.
Thanks for all the cues!
Sent from my Nexus S
Click to expand...
Click to collapse
Okay here's a few tips, cwm cannot flash kernels with son devices, get 4ext recovery for that. Second thing, reflash the from after doing a super wipe, if 4ext doesnt reboot and flash the kernel, do it manually, ill assume you know how to use ad, if not check my Bible tutorial on it, use the boot command for flashing boot images, take the boot file from the zip file, place it in the folder where your adb files are and flash it to your device while its in fastboot mode.
Sent from my SGH-T679 using xda app-developers app
Well, I think I have done all you mention above, the only thing i'm not sure to understand is what you mean by "super wipe" I found some executables about it but I guess it can't do much more than the flash all partitions (except external sdcard) in 4ext recovery wich I finally managed to install properly.
So, I made that global formatting thing, I tried to install an ICS based ROM and 4ext rebooted to install kernel, same bootloop. Tried to install manually the kernel that came with this rom via the classic fastboot flash boot boot.img. Same bootloop. Tried to put the modules manually via the recovery adb access (performing a mount -a in adb shell to have everything present in fstab mounted) and flashing this stock kernel with no more success.
Achieved the same operations with a GB based ROM (this one: http://forum.xda-developers.com/showthread.php?t=1535173) with both the faux and the stock kernel without any more success.
Did I miss something? Am I so dumb? Do you have any other rom to suggest that have higher chances to succeed?
Do you think trying to restore my sotck nandroid with 4ext has more chances to succeed?
Thanks, again and always!
After downloading this rom and thinking everything would be just fine when moving to CM7 on my brother's rooted Photon, I come to a boot loop! I tried to use RSDLite to flash a SBF over to the phone, it fails, I try to use Android' Recovery to flash a new rom, fails, and then I try to factory reset and wipe the phone, FAILS! I have no clue what to do here.
I am so used to my Sensation 4G and everything is so much simpler on it, but I have no clue what I am doing with this Photon. Can someone please point me in the right direction of what I need to do? I need some real answers! I've tried tons of guides here on the forums but nothing seems to work!
Normally I could use CWM to fix it all up, but I never could find it for this phone!
Help!
bump. Please, need help.
ClipTy said:
After downloading this rom and thinking everything would be just fine when moving to CM7 on my brother's rooted Photon, I come to a boot loop! I tried to use RSDLite to flash a SBF over to the phone, it fails, I try to use Android' Recovery to flash a new rom, fails, and then I try to factory reset and wipe the phone, FAILS! I have no clue what to do here.
I am so used to my Sensation 4G and everything is so much simpler on it, but I have no clue what I am doing with this Photon. Can someone please point me in the right direction of what I need to do? I need some real answers! I've tried tons of guides here on the forums but nothing seems to work!
Normally I could use CWM to fix it all up, but I never could find it for this phone!
Help!
Click to expand...
Click to collapse
if you dont have cwm installed, i assume that you flashed that rom while in bootstrap recovery because you didnt state that the phones bootloader was unlocked.That particular rom is an unlocked only rom, which is why you're stuck in that loop. If I'm right and you flashed that rom via bootstrap, you should be able to get back into it by powering down the phone, holding power and volume down, then using the volume down key to cycle through the options until you hit 'android recovery', then press volume up to boot into it.
At that point, go to mounts and storage, mount usb storage while phone is plugged into your pc, and place this rom:
http://forum.xda-developers.com/showthread.php?t=1648297
On your sd card. After this, go back into mounts and storage and wipe data, system, and cache. Flash the rom you just placed onto your sd card and reboot.
Again, this is all asuming you installed bootstrap recovery, if I'm wrong let me know and ill try to help you further.
I forgot to add, you're also going to need to download a stock blur kernel and place that on your sd card aswell, flashing it after you flash the rom. I can't remember where to find the stock blur kernel but give me a second and ill try to find it for ya.
I don't find that very professional. I think the best you can do is tell me which section it belongs in. At least Acvice offered help...
Thanks you so much! I knew I would have to flash the stock stuff, but I just couldn't find it! Yes, I used bootstrap as I thought it was the only means of getting into cwm. I wont be screwing around after this. Only problem is, the phone is dead! I need to charge it again lol. Thanks for helping. Ill let you know the outcome later.
Acvice said:
*snip*
Click to expand...
Click to collapse
So I am downloading that rom you gave me, seems like a good one, now I am just waiting on the Kernel, have you found it yet? Oh, and I couldn't mount my phone through recovery, so I just took the SD card out and did it myself.
EDIT: I tried to install the rom, I got an E: signature verification failed and the installation aborted. I've also tried this with other roms before. What is making this happen?
ClipTy said:
So I am downloading that rom you gave me, seems like a good one, now I am just waiting on the Kernel, have you found it yet? Oh, and I couldn't mount my phone through recovery, so I just took the SD card out and did it myself.
EDIT: I tried to install the rom, I got an E: signature verification failed and the installation aborted. I've also tried this with other roms before. What is making this happen?
Click to expand...
Click to collapse
Meh, you just flashed something you shouldnt have is all. It honestly happens to all of us. You learn the most by screwing up your phone haha.. Figured i would have you try that method as it would have gotten you a nice fast rom and also fixed your problem. But it looks like youre just unlucky. Were just gonna have to get ya back on stock by flashing an SBF.
1) Download the Windows Moto drivers and install them. Make sure you choose 32bit or 64bit, respectively. (quick google search)
2) Download RSD Lite (quick google search)
3) Download the SBF located here and unzip it.
Use this video to guide you through. Some of his links are outdated which is why i linked the one above. If you are used to ODIN on Samsung devices, you'll probably already know what to do as it's the same kind of program. Good luck. Let me know how it goes.
I've tried RSDLite with an Sbf before, it never succeeded.
Sent from my HTC Sensation using xda app-developers app
Is it possible to flash an sbf with a low battery? If not, how can I charge this thing?
Yes I have searched, yes I have tried google and yes I am still stuck...
I *think* I have tried just about everything and I have read through about 10 "soft brick" or "stuck on samsung screen after rooting on stock ICS" (and most combinations of) but nothing is working. I'm sure it's probably an easy fix but I just can't seem to get anywhere. Here's what happened.....
I googled rooting galaxy not after ICS update and found this http://rootgalaxynote.com/galaxy-no...y-note-sgh-i717-icsgingerbreadeasiest-method/
It was all I could find about rooting after the ICS OTA update, so I did it. Everything seemed fine. I had CW but no superuser so I DL it from the market as well as my old Titanium pro from back when I rooted my HTC. I rebooted my phone to get it all settled in and decided to run Titanium and get this party started. I got an error message that busybox was not installed so.... I installed it but when I clicked the app on my phone it said it would not install because I didn't have root access.... This is where the confusion starts to set in.
So I restarted to see if I could get into CW but when I rebooted the soft brick started.... I was stuck at the "samsung" screen.
I IMMEDIATELY ran to XDA and began my search. I can still get to DL mode, Odin and CW so I know there is hope. I tried the files listed in the "All in one guide for noobs" and the "Galaxy Note Super Everything Thread (I717)".
There was a suggestion to use Kies but when I put in my serial # and model name i get the "galaxy note does not support initializing" message.
I'm not new to flashing/rooting, although things are a bit different, I have a basic understanding of the process but I ain't no Einstein either...
I also tried to flash the stock Telus ICS rom but I got an error message and my lil droid guy went belly up....
Any help would be greatly appreciated! I love my note and this is killing me...
I have to go to work so if I don't reply immediately its because I have no email access at work.... Especially without my Note....
The steps are correct in the link you gave.
Did Odin3 say success?
Did you get CWM installed?
Did you flash superuser?
Is there a superuser icon in your apps?
Ranger is on it....
I'm thinking we dont have CWM on the device....????
And no SU flash, from within the recovery that doesnt exist....g
He has cwm, he did not flash superuser, Looks like he assumed flashing cwm would automatically root him.
Since you can get into recovery... i would just go ahead and download a Rom zip, transfer to phone by mounting in cwm (mounts and storage if you didn't know) and flash that sumbitch
Oh yep...found that.......Thanks brother....g
That means do or redo steps 13 to 16 in the guide you posted.
agreed....g
im back...
Just got in, thanks for the replies.
Yes I have CWM and can access it. I have tried to flash the CM roms as well as the stock telus ICS rom but was denied at install. I got a "assert failed getprop (ro.build.device)" message and 2 other "ro." error messages when I install the cm nightly quincyatt rom.
rangercaptain said:
The steps are correct in the link you gave.
Did Odin3 say success? Yes
Did you get CWM installed? Yes
Did you flash superuser? Yes
Is there a superuser icon in your apps?
Click to expand...
Click to collapse
Cant see my apps but when I first flashed CWM and was able to see my screen there was a SU app on my home screen because I DLed it from the market.
You need to update your CWM. Get it here:
http://forum.xda-developers.com/showthread.php?p=28040353
Look right under the big green arrow in the first post of the thread.
Readreadread. Then thankbigjoethankbigjoe.
Of course, come back here if further assistance is needed or you solve the issue.
I thought I was on the latest. Someone else suggested that also, so I flashed the touch CWM Updated 04/14
rangercaptain said:
You need to update your CWM. Get it here:
http://forum.xda-developers.com/showthread.php?p=28040353
Look right under the big green arrow in the first post of the thread.
Readreadread. Then thankbigjoethankbigjoe.
Of course, come back here if further assistance is needed or you solve the issue.
Click to expand...
Click to collapse
Yup, thats the one I flashed, its working and I get a successful message when I flashed SU so I assume its there also. Any recommendations of a rom to try and flash? Still hanging at the samsung screen.....
I appreciate the help by the way, I know how frustrating it can be to try and help with tech situations from emails and messages (Hi Mom ).
Thanks has been pushed....
That assert error is in the script used by CWM to flash and it is saying 'wrong rom for your device'. So for sure you have the correct CWM and rom for your phone? Just checking because errors at this point make your phone useless.
rangercaptain said:
That assert error is in the script used by CWM to flash and it is saying 'wrong rom for your device'. So for sure you have the correct CWM and rom for your phone? Just checking because errors at this point make your phone useless.
Click to expand...
Click to collapse
I got my CWM from the link you posted but the rom I am iffy about. Any suggestions for a rom to try and flash? something stable?
EDIT: going to try and flash this rom and modem http://forum.xda-developers.com/showthread.php?t=1801689
Downloading now..... Sloooooowly. lol
Holy McCrappy dance!
Okay... so I flashed the stock ATT with odin. just at start screen now.... Don't think it is rooted so now.... How do I get back to telus and root right the first time?
Edit: so it appears the ATT rom was a GB ver so I am assuming that I was somehow reverted to GB instead of my stock ICS. Now to try and flash a stock Telus GB rom, update then try to root.... AGAIN! Thank gawd I don't have a $600 paperweight now!
Thanks everyone
I recommend this rom:
http://forum.xda-developers.com/showthread.php?t=1766933
Select the pure stock. There is no point in using the Telus rom.
Please read carefully. Good luck.
^^^ what ranger said. No point in repeating trust and go!
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
rangercaptain said:
I recommend this rom:
http://forum.xda-developers.com/showthread.php?t=1766933
Select the pure stock. There is no point in using the Telus rom.
Please read carefully. Good luck.
Click to expand...
Click to collapse
I would like my ota ICS back but I guess no bother huh? I am back on the stock telus GB and for some reason it wont let me update to ICS anyway.... LOL
Might as well root it up and go go go!
Thanks again Ranger.
WOW! that pure stock is a big ole file! lol
Ok, take it easy for a few days. Just read up and, now that you've survived the worst scenerio, you might want to try a more custom rom or other modifications. Pretty soon you will be pulling someone else's a$$ out of the fire. Good luck.
I think I'm okay now. Was a skeerty one though. Lol
Hi, got a problem, long story short, cant acces internal storage in any way, tried to flash gapps for cmx by lloir but cwm and twrp dont allow me to do it in any way (fastboot flash, adb sideload zip), does anyone had similar problem or even better, found a solution?
myusernamewastoken said:
Hi, got a problem, long story short, cant acces internal storage in any way, tried to flash gapps for cmx by lloir but cwm and twrp dont allow me to do it in any way (fastboot flash, adb sideload zip), does anyone had similar problem or even better, found a solution?
Click to expand...
Click to collapse
Make sure your adb is up to date and supports sideload and make sure you have the proper drivers on your pc to recognize the hox+
Once those terms are met, flash TWRP and do the sideload process again and ditch CWM
Sent from my HTC One X+ using xda premium
yes, adb is up to date, it supports sideload, there was no other way to flash rom (which is quite logical), i am using linux, screw windows-style "proper drivers" (and yes, I have proper drivers), adb/fastboot devices returns me serial code for plugged phone and yes, tried to sideload that zip in twrp (sending ok, writing failed) and in cwm (dunno, adb sideload gapps.zip didnt work anyway). I acctualy tried to figure out whats going on before posting, but nothing helped :/
P.S. I woke up sick today, which is bad for my stretched program, so I may be a bit rude...
i assume you have "enabled" sideload in TWRP
advanced > sideload
or you can just adb push filename.zip data/media/0/whatever.zip (if you use 4.2.1 just remove the 0) within the recovery without needing to hit sideload
yes, i have enabled sideload, in cwm, device was not found, in twrp terminal quoted sending ok, writing failed
adb push was I think endless waiting for device, or error (cant try it again right away, dont have hox+ here), but i am not sure i tried right path when i am looking at data/media/... :/ will try in few hours
You can also just push the file to your sdcard and then flash by putting in adb push then the file /sdcard
Sent from my HTC EVARE_UL using xda app-developers app
Dunno if you cant read or what, but I cant just adb push or fastboot flash it, I cant put in internal storage by any mean I can think of thats whole point of this thread...
Yes I did understand bit mounting sd storage is not possible at the time , and if sideload does not work which I have experienced myself , adb push does work in recovery.
Sent from my HTC EVARE_UL using xda app-developers app
Finaly did it (several days ago, too busy to post)thx for help, but I have come to interesting problems... when I run camera, it just pops error saying that i dont have any storage to store photos and FC...
same problem - HELP!
myusernamewastoken said:
Finaly did it (several days ago, too busy to post)thx for help, but I have come to interesting problems... when I run camera, it just pops error saying that i dont have any storage to store photos and FC...
Click to expand...
Click to collapse
Hey, I have ran into the same issue with not being able to sideload any ROMs or zip files to my sdcard after flashing. How did you correct this issue so that the sd card is available and camer/etc work?
thanks for the help
mmgill said:
Hey, I have ran into the same issue with not being able to sideload any ROMs or zip files to my sdcard after flashing. How did you correct this issue so that the sd card is available and camer/etc work?
thanks for the help
Click to expand...
Click to collapse
I didnt solve it sofar, still trying...
P.S. somebody on national android forum told me to flash different rom, it should fix according to him, didnt seems to work... help anyone?
Can you tell why you say it is not working? Because you didn't find the ROM_NAME_FILE_YOU_SIDELOADED.zip?
Is this the situation?
Lucky Thirteen said:
Can you tell why you say it is not working? Because you didn't find the ROM_NAME_FILE_YOU_SIDELOADED.zip?
Is this the situation?
Click to expand...
Click to collapse
Hmm... topic name was solved out, now I have different problem described later, dont really get your post, its too late for combination of me and sarcasm and honestly i dont care about someone beiing sarcastic in forum, I was in plenty of flamewars and I grew up. If you wanted to say something meaningful, sry, didnt get it, eventhough my english is fine and I am smart guy.
@mmgill I solved it in a weird way for me (maybe someone can explain), I tried to flash paranoid android, flashing OK, but it didnt boot after really long time, so I decided to put there CMX by llior again (found out its sofar only rom working for me). And like a miracle, external storage was avaliable for camera, file managers, windows and ubuntu (after making whole MTP concept work in ubuntu). Will try to flash some other roms my friend wanted to use (I dont own HOX+, it resembles dining plate for me, its my friends phone and it was his first root ).
myusernamewastoken said:
Hmm... topic name was solved out, now I have different problem described later, dont really get your post, its too late for combination of me and sarcasm and honestly i dont care about someone beiing sarcastic in forum, I was in plenty of flamewars and I grew up. If you wanted to say something meaningful, sry, didnt get it, eventhough my english is fine and I am smart guy.
Click to expand...
Click to collapse
Well if you take some time to read all my posts you will understand that I wasn't making fun of you and never flame people. I do realize now that I forgot to quote mmgill when I responded (he PM'd me about this issue), this is where you got lost.
Greetings.
Ok, then I am sorry... anyway, problem solved by flashing another rom, its not really my phone, its my friends, we were unable to do this earlier, cos hes not as much educated in all this and he downloaded several roms, which were all for AT&T HOX+ (he has international version), I did believe him that he choosed roms compatible with his phone, but hes dumbass and I feel terrible to loose many hours of my time when I could write my thesis and even worse to not check it earlier after him (its honestly very stupid rookie mistake), it just occured to me out of blue while chewing tobbaco... Thanks for help anyway, some things said helped to resolve this issue much faster...
.
.
.
so dumb... and now I am typing fastboot flash boot XYZ.img in my dreams...
using the right version of TWRP
Just a thought, if this is still an issue for anyone. But if you aren't able to mount your internal storage make sure you have installed the correct recovery installed. You can check at the end of the .img, Sprint ends with M7wls, international ends with M7, and there are others.
If you don't have the correct recovery installed it may not load your storage.
Hope this helps,
Cheers.