Hey Guys,
I'm in need of some really n00b friendly advice.
When you flash a new ROM (i.e. CM9) in CWM the tutorials tell you to flash the file named Update.zip. My problem is that I can't seem to find one in the zip file I downloaded for my xperia mini.
I downloaded FXP131, and found the zip file to contain a boot.img, which will be the kernel. And 2 other folders named META-INF and System.
I know how to flash the kernel and expect it was just left in there for easy transportation.
But where in the world is 'update.zip'?
Am I meant to unpackage the kernel then re-zip the META-INF and System folder and then call that 'Update.zip'?
I've flashed roms for some of my other devices before, but they've always used flashtool or samsungs flashtool.
Please help me guys, I don't like sounding this inexperienced
update.zip
I'm wondering if the ROM I am trying to flash needs to be renamed as update.zip in order to work. It is krook's v.6 of JB for the Lenovo K1 tablet. Since the download site has to distinguish between wifi and 3G versions, as well as nvflash versions there are a number of different filenames, however does it need to be renamed after putting it on my SD card?
Generally speaking "update.zip" is used as a generic name. For example the update.zip I just flashed is actually named "rascarlo_maguro_ota_2012-11-01.zip". When you flash a custom ROM in a custom recovery you should be able to browse & flash whichever file you need.
The FXP131.zip file that contains the boot.img and 2 other folders named META-INF and System is the "update.zip"
solved
My problem was an incomplete download. I compared file sizes, and checked md5sums and determined the correct ROM and it is now in the middle of finishing the upgrade/optimization process.
Thx
Related
I got clockworkmod working fine, but I am unable to loan ROMs. Whenever I downloand a ROM it opens in muiltiple files and it also happens with TNT, Thi is where Im stuck
Step 3.
Copy whatever ROM you wish to install (it should be a .zip file) to the ROMs folder on your tablet. (Leave it zipped, Clockwork will install it from the .zip file as is). trying to get VEGan 5.1 final
Note: If the ROM you downloaded has multiple files, look for the one named “update.zip” and rename it to whatever you want (something to help you differentiate it from other ROMs), then copy that to the tablet. If an “update.zip” doesn’t exist, and you’re lost…read through that ROM’s thread and see if anybody else asked about it…if not then you probably should (on that ROM’s thread…each one is different).
I cant fiqure how to get the update.zip. When I do open the files i get 3 files
META_INF,boot, and system. I tried to copy and paste all three files in the ROMs, but it never show the update.zip
You don't need an update.zip with clockworkmod recovery... you just need the rom that is zipped and can be named anything.
Stop unzipping the rom you are downloading and just copy it to your device. Install that with clockworkmod recovery.
Sent from my Viewsonic 10" GTab...
novicexda said:
I got clockworkmod working fine, but I am unable to loan ROMs. Whenever I downloand a ROM it opens in muiltiple files and it also happens with TNT, Thi is where Im stuck
Step 3.
Copy whatever ROM you wish to install (it should be a .zip file) to the ROMs folder on your tablet. (Leave it zipped]/B], Clockwork will install it from the .zip file as is). trying to get VEGan 5.1 final
Note: If the ROM you downloaded has multiple files, look for the one named “update.zip” and rename it to whatever you want (something to help you differentiate it from other ROMs), then copy that to the tablet. If an “update.zip” doesn’t exist, and you’re lost…read through that ROM’s thread and see if anybody else asked about it…if not then you probably should (on that ROM’s thread…each one is different).
I cant fiqure how to get the update.zip. When I do open the files i get 3 files
META_INF,boot, and system. I tried to copy and paste all three files in the ROMs, but it never show the update.zip
Click to expand...
Click to collapse
you've answered your own question, the rar or zip file you downloaded might be in diff names, but always leave it in zip format. if in rar, unrar and the zip file should be in it.
in clockwork recovery, you can update by update.zip or choose your own zip
tcrews said:
You don't need an update.zip with clockworkmod recovery... you just need the rom that is zipped and can be named anything.
Stop unzipping the rom you are downloading and just copy it to your device. Install that with clockworkmod recovery.
Sent from my Viewsonic 10" GTab...
Click to expand...
Click to collapse
That is my problem, if automaticly unzips when it downloads. I am not sure if its my windows setting becaue I am unable to download TNT lite because I keep getting " windows can no opem" message. Is there a way i can prevent it from unzipping? Thanks BTW
maybe use a diff browser to download or right click on link and "save as"
You might be hitting open instead of save ...
down load it direct to your Gtab
Download the file directly to your tab. Use ES file explorer to move it to your SD card if necessary. Reboot in to clock work - choose file from SD card-select it and install.
Hi, I have new Prestigio tablet PMT5777_3G and I want to modify it's default ROM. I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=1801690. I successfully extracted system folder, but I have no idea how to create updater-script for this specific ROM. If I understand correctly I need to get updater-script from original ROM.
I've got something that resembles original ROM, but it's folder structure is completely different from what I would expect.
I would expect:
META-INF
system
boot.img
I've got:
APDB_MT6582_S01_MAIN2.1_W10.24
boot-sign.img
BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V12_P4_1_wg_n
cache-sign.img
Checksum.ini
EBR1-sign
lk-sign.bin
logo-sign.bin
MBR-sign
MT6582_Android_scatter.txt
preloader_htt82_tb_jb5.bin
recovery-sign.img
secro-sign.img
system-sign.img
sro-lock-sign.img
sro-unlock-sign.img
userdata-sign.img
I'm an android developer, but have no experience with custom ROM's and now am in a situation, where I want to get that custom ROM up and running, but am unable, because I can't figure out how to create updater-script or extract it from files that I currently have. It would be great if someone could point me to the right direction of what to do next.
Thanks
P. S. It seems it's against the rules to ask questions here, but I can't seem to find where else to ask this on xda
Dantenas said:
Hi, I have new Prestigio tablet PMT5777_3G and I want to modify it's default ROM. I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=1801690. I successfully extracted system folder, but I have no idea how to create updater-script for this specific ROM. If I understand correctly I need to get updater-script from original ROM.
I've got something that resembles original ROM, but it's folder structure is completely different from what I would expect.
I would expect:
META-INF
system
boot.img
I've got:
APDB_MT6582_S01_MAIN2.1_W10.24
boot-sign.img
BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V12_P4_1_wg_n
cache-sign.img
Checksum.ini
EBR1-sign
lk-sign.bin
logo-sign.bin
MBR-sign
MT6582_Android_scatter.txt
preloader_htt82_tb_jb5.bin
recovery-sign.img
secro-sign.img
system-sign.img
sro-lock-sign.img
sro-unlock-sign.img
userdata-sign.img
I'm an android developer, but have no experience with custom ROM's and now am in a situation, where I want to get that custom ROM up and running, but am unable, because I can't figure out how to create updater-script or extract it from files that I currently have. It would be great if someone could point me to the right direction of what to do next.
Thanks
P. S. It seems it's against the rules to ask questions here, but I can't seem to find where else to ask this on xda
Click to expand...
Click to collapse
Since you are a beginner to ROM development, I would recommend the use of dsixda's Android kitchen, which you probably have downloaded already. If not use this link
http://forum.xda-developers.com/showthread.php?t=633246
Follow these steps to obtain the file structure and Meta-Inf folder for your custom rom.
1. Open the folder where you have placed the kitchen.
2. You will find a folder called original_update.
3. Open that folder and copy your boot.img and system.img files into it. ( In your case it is boot-sign.img and system-sign.img. Rename those files into boot.img and system.img and place them in the folder )
4. Now open the kitchen. ( Refer the above link to know how to do it )
5. You will find " 1. Set up working folder from ROM " option under Main Menu.
6. Type 1 and you will be directed to another menu. Click Enter.
7. Select your boot.img and system.img from the menu.
8. Now follow the instructions that appear on the screen.
9. When you successfully complete the steps, you will have the required Working folder, with boot.img, system folder and Meta-Inf folder, which will contain the updater-script (It will be automatically generated)
All the best. :good:
Hit Thanks if this helped you... PM me if you need further help or search the forum for detailed instructions.
Thanks, this helped me, but I still can't create ROM.
I encountered a problem with kitchen:
Code:
Available ROMs:
(1) system.img and boot.img
Enter selection number (default=1, cancel=0, r=refresh):
Found original_update/system.img
Found original_update/boot.img
The new working folder will be named WORKING_061614_070841
Change the name (y/n)? (default: n):
Creating working folder WORKING_061614_070841 ...
Copying boot.img ...
Copying system.img ...
Adding an update-script ...
NON-YAFFS/NON-TAR FILE FORMAT DETECTED IN ROM
Mounting system.img to loopback device and then extracting files ...
Error: Unable to mount system.img
Error: No /system/framework folder found!
Press Enter to continue
This creates my missing update-script and boot.img, but system folder is empty.
Would it be a good idea to extract all system files from device and attempt to create ROM with them, and this update-script, or is there something I could do with system.img to make it extract?
Try this
Don't worry. There's always an alternative. Try this simple method.
1. Boot into CWM (Clockwork Mod) Recovery. (I'm pretty sure you know how to do it, if not, you can feel free to search the forum)
2. Choose Backup and Restore.
3. Make a backup in your external sdcard.
4. Now boot normally, open your external sdcard. You will find a folder called clockworkmod. Copy that folder to your PC.
5. Inside that folder, you will find the backup.
6. Now, copy boot.img and system.ext4.tar.a to your original_update folder of the kitchen.
7. Warning! Do not copy system.ext4.tar, only copy system.ext4.tar.a
8. Once you have copied these two files, rename system.ext4.tar.a into system.ext4.tar
9. Now, open android kitchen and follow the exact same steps as you did before.
10. When you choose the available rom, you will find the screen as below.
Code:
Available Roms:
(1) system.ext4.tar and boot.img
11. Choose it and follow the instructions. You will have your required working folder.
Try this and let me know if you still face any issues. :good:
I was unable to load CWM recovery, because it is not supported by my device. I tried TWRP too, which also doesn't support my device. Is it possible to do without CWM?
Dantenas said:
I was unable to load CWM recovery, because it is not supported by my device. I tried TWRP too, which also doesn't support my device. Is it possible to do without CWM?
Click to expand...
Click to collapse
I'm sorry my friend, even if you create your own ROM, you require either one of them to flash the ROM to your device. Seeing you so keen on developing the rom, try to use any yaffs tool to create your system.img from extracted system folder. You may refer this thread.
http://forum.xda-developers.com/showthread.php?t=1645412
I have a system.img file, which I extracted from a 20J KDZ. I would now like to convert it into a flashable zip. I have 2 reasons for this. One, I dont want to have to use LGUP to revert my phone to a 100% stock system. It is much easier to just flash a zip of the system partition. Two, I would like to get into modding and ROM development. I believe that it is best to start from pure stock and make changes from there, instead of basing your work off of something that someone else has already modded.
I found these threads but they're a bit old (Lollipop):
1. http://forum.xda-developers.com/lg-v10/development/lg-h901-stock-img-files-boot-recovery-t3238638
2. http://forum.xda-developers.com/tmobile-lg-v10/development/lg-h901-stock-images-device-restore-t3241170
In one of them a member provided img's for recovery, boot, and system. In the other thread flashable zips of these img's were posted. These are for the Tmo v10. So it's not a matter of whether it can be done, but how. What tools are needed?
I downloaded the zip from one of the aforementioned threads, deleted the boot.img, replaced his system.img with mine, edited updater-script, and zipped up the meta-inf and system.img files with 7zip. I also checked to be sure that the block to be flashed was correct, it is the same (even though my img is for MM). I tried flashing with TWRP, I immediately get an error code 6.
What should I do?
Just off the subject slightly...but Eliminater74 already has a flashable zip (thought TWRP) for the 20J release. Its a 2 Part System.
Eliminator74's zip is modified. I want to take a 100% pure stock system.img (extracted from stock firmware) and put it into a zip that can be flashed in TWRP. When I say stock, that's what I mean. No root, no Xposed, no BusyBox, nothing. This has already been done for Lollipop on the v10, but I have MM. I have already explained why I want to do this. I'm currently looking into whether Superr's Kitchen can accomplish this.
He has a Fully Stock 20J release..just gotta read the thread..
AnonVendetta said:
I have a system.img file, which I extracted from a 20J KDZ. I would now like to convert it into a flashable zip. I have 2 reasons for this. One, I dont want to have to use LGUP to revert my phone to a 100% stock system. It is much easier to just flash a zip of the system partition. Two, I would like to get into modding and ROM development. I believe that it is best to start from pure stock and make changes from there, instead of basing your work off of something that someone else has already modded.
I found these threads but they're a bit old (Lollipop):
1. http://forum.xda-developers.com/lg-v10/development/lg-h901-stock-img-files-boot-recovery-t3238638
2. http://forum.xda-developers.com/tmobile-lg-v10/development/lg-h901-stock-images-device-restore-t3241170
In one of them a member provided img's for recovery, boot, and system. In the other thread flashable zips of these img's were posted. These are for the Tmo v10. So it's not a matter of whether it can be done, but how. What tools are needed?
I downloaded the zip from one of the aforementioned threads, deleted the boot.img, replaced his system.img with mine, edited updater-script, and zipped up the meta-inf and system.img files with 7zip. I also checked to be sure that the block to be flashed was correct, it is the same (even though my img is for MM). I tried flashing with TWRP, I immediately get an error code 6.
What should I do?
Click to expand...
Click to collapse
What tool did you use to extract the KDZ? I am trying to get a stock boot.img for the H901J build and I cannot seem to find it. I used the WindowsLGFirmwareExtract 1.2.5.0 release and all I see are a ton of .bin files and system.img. Is boot.img inside system.img?
@Sippi4x4man: I also used WindowsLGFirmwareExtract. Inside the KDZ there is a DZ and DLL file. Just extract the DZ, then you see lots of BINs. The system.img is split up (since it's around 4GB alone), but the tool can combine the pieces into one file. I was able to figure out how to manually flash the IMG, by running a dd command with TWRP's terminal emulator.
dd if=/external_sd/system.img of=/dev/block/platform/f9824900.sdhci/by-name/system
It takes a few minutes to finish, followed by a message that says no more space is available (I guess /system got filled up). I think when you dd anything you are copying both free and used space, since an IMG is usually just a (sometimes raw) disk image. TWRP will also initially say that no system is installed, I just ignored it, the device boots fine, everything is pure stock, no issues at all. System is mountable after subsequent boots into recovery. I used Magisk and the phh Superuser Magisk module to gain root without modding system partition, and the Magisk version of Xposed. But I would still like to create a flashable zip to automate this. If I figure it out I don't mind uploading it so the community can benefit.
As for the stock boot.img, I would imagine that the boot.bin inside the DZ is probably what you're after. The file size seems about right. However, I tried renaming boot.bin to boot.img and flashing from TWRP. Device wouldn't boot. So maybe there is some other conversion process that needs to be done. I can't think of any other way to obtain a pure stock boot image, extracting it from stock firmware seems like a sure way. If you ever figure it out then please provide a copy. Make sure it isn't patched by SuperSU, Xposed, Magisk, etc. I could maybe merge it into a stock zip.
AnonVendetta said:
@Sippi4x4man: I also used WindowsLGFirmwareExtract. Inside the KDZ there is a DZ and DLL file. Just extract the DZ, then you see lots of BINs. The system.img is split up (since it's around 4GB alone), but the tool can combine the pieces into one file. I was able to figure out how to manually flash the IMG, by running a dd command with TWRP's terminal emulator.
dd if=/external_sd/system.img of=/dev/block/platform/f9824900.sdhci/by-name/system
It takes a few minutes to finish, followed by a message that says no more space is available (I guess /system got filled up). I think when you dd anything you are copying both free and used space, since an IMG is usually just a (sometimes raw) disk image. TWRP will also initially say that no system is installed, I just ignored it, the device boots fine, everything is pure stock, no issues at all. System is mountable after subsequent boots into recovery. I used Magisk and the phh Superuser Magisk module to gain root without modding system partition, and the Magisk version of Xposed. But I would still like to create a flashable zip to automate this. If I figure it out I don't mind uploading it so the community can benefit.
As for the stock boot.img, I would imagine that the boot.bin inside the DZ is probably what you're after. The file size seems about right. However, I tried renaming boot.bin to boot.img and flashing from TWRP. Device wouldn't boot. So maybe there is some other conversion process that needs to be done. I can't think of any other way to obtain a pure stock boot image, extracting it from stock firmware seems like a sure way. If you ever figure it out then please provide a copy. Make sure it isn't patched by SuperSU, Xposed, Magisk, etc. I could maybe merge it into a stock zip.
Click to expand...
Click to collapse
It's been a while from this post... But I'm looking after the same goal you were and got the same error 6 trying the same things you described in your previous posts. Despite of these long 4 years, let me try: did you finally achieve to make the flashable zip with system.img?
I do not own an LG V10 anymore.....it is the most garbage phone I've ever had.
I now use SuperR's Kitchen to create flashable zip from system.img. Works like a charm every time. Downside is that you need a PC to use it. It works for all phones (but you must also have an unlocked bootloader and custom recovery, or you will not be able to flash the zip). There are both free and donate versions, both will work fine.
AnonVendetta said:
I do not own an LG V10 anymore.....it is the most garbage phone I've ever had.
I now use SuperR's Kitchen to create flashable zip from system.img. Works like a charm every time. Downside is that you need a PC to use it. It works for all phones (but you must also have an unlocked bootloader and custom recovery, or you will not be able to flash the zip). There are both free and donate versions, both will work fine.
Click to expand...
Click to collapse
Thank you for your reply. My device is Lenovo Z6 Pro but I thought this wouldn't make a difference.
Just to be sure, what you get with SuperR's Kitchen is a zip including system.img file and not the /system folder, right? Thank you in advance.
Edit: I had tried with other kitchen softwares with no success but SuperR's Kitchen did the job as you said, like a charm. Tons of thanks.
@descarao81: No, SuperR's Kitchen does not include system.img/boot.img, you must provide them yourself. They are device-specific. And system.img is a very large file, so it cannot reasonably be included in the Kitchen zip.
Yeah, maybe I wasn't clear, I meant if the resultant zip would include those raw image files being the original image files provided by the user. It's clear now. Thank you.
Here is how to do it...
1. Go to:
https://forum.xda-developers.com/tm.../lg-h901-stock-images-device-restore-t3241170
Download from the link he provided.
2. Extract the .zip file that you downloaded.
3. Make a new folder called "rom"
4. Copy the META-INF folder from the folder you extracted and place it into the "rom" folder.
5. Download any other flashable rom for your device. Extract it.
6. Go to {EXTRACTED_FLASHABLE_ROM}\META-INF\com\google\android\update-binary in your flashable extracted rom folder. Copy the "update-binary" . Got to the "rom" folder and go to META-INF\com\google\android. Delete the update-binary there and replace it with the one you have copied.
7. Now copy the boot.img from the other rom that is for your device. And place it into the "rom" folder.
8. Now Finally Compress the all the files.
9. Now you will have a flashable system.img.
10. Go to TWRP and flash the .zip that you have just made!
Upytry2 said:
Here is how to do it...
1. Go to:
https://forum.xda-developers.com/tm.../lg-h901-stock-images-device-restore-t3241170
Download from the link he provided.
2. Extract the .zip file that you downloaded.
3. Make a new folder called "rom"
4. Copy the META-INF folder from the folder you extracted and place it into the "rom" folder.
5. Download any other flashable rom for your device. Extract it.
6. Go to {EXTRACTED_FLASHABLE_ROM}\META-INF\com\google\android\update-binary in your flashable extracted rom folder. Copy the "update-binary" . Got to the "rom" folder and go to META-INF\com\google\android. Delete the update-binary there and replace it with the one you have copied.
7. Now copy the boot.img from the other rom that is for your device. And place it into the "rom" folder.
8. Now Finally Compress the all the files.
9. Now you will have a flashable system.img.
10. Go to TWRP and flash the .zip that you have just made!
Click to expand...
Click to collapse
Trying that exactly when im home! Thank you!
While trying to create my first ever Android firmware I had solve several problems, especially if you consider that I prefer under Windows instead of Linux.
I won't go into too many details as I have to assume everyone attempting this did at least some reading on the general how to of firmware installations and modifications.
Things you need:
Original firmware for your device as a IMG file
Amlogic's Customisation tool
A Rom Kitchen of your choice (I use Carliv)
System_Extractor-WIN-master
Some time...
Step1: Load the firmware into the AML tool and tick all boxes except the last one.
In the tmp folder you will find the unpacked files.
Under Level one are the files we want.
You will see a bunch of "PARTITION" files, we copy the following ones into a seperate folder for further use to create the ZIP.
I suggest to name the folder "Install" so we are all on the same page here.
boot.partition
bootloader.partition
logo.partition
recovery.partition
If you checked a flashable ZIP update before you will notice some files are missing, let's try to fix that.
Rename all partition files you copied to img, so instead of boot.partition you get boot.img.
Unpack the boot.img with your kitchen.
You will find a file "boot.img-second" - copy that into your install folder and rename it to dtb.img.
Inside the unpacked ramdisk (In your kitchen) of the boot.img you will fing the "file_contexts" file - copy that into your install folder as well.
Most AML firmware I had so far used a system.new.dat and a system.transfer.list to create the system partition.
We can create them from the system.partition file after renaming to system.img in System_Extractor-WIN-master .
To do this the system.img needs to be unpacked and we need again a copy of the file_contexts.
After the image is unpacked we can pack it again as system.new.dat and system.transfer.list.
The last missing bits can be tricky though as now we need a META-INF folder that works for our device in question.
There are two way to fix that.
Method one:
Search the usually chinese websites using Google to find original firmware for your device.
Chance are that you will find something like an OTA update - in there you will find what you need.
Method two (I never tested that):
Take the META-INF folder from an OTA update of a box with identical hardware specs.
Most important part here is the memory configuration so for a 2/16GB box you need a 2/16GB OTA update.
Next of same importance is the WiFi/Bluetooth config.
If you only have Wifi than an update for a box With daul wifi and BT4.0 won't help you.
If the actual Wifi chip is a different one but CPU, GPU, Memory and connections are the same it should still work.
Once you have the META-INF folder included into your Install folder the firmware is ready to be zipped - in theory!
The X96 for example uses a hash check for the update and created system partition.
To be able to flash your image you need to know what the original recovery would expect - has check or not.
The updater script within the META-INF folder needs to be updated to match your build.prop details as well hash check/no hash check.
Again, with an original OTA update you will find these infos.
Only if you don't have the OTA and no clue what your updater script and recovery needs you are a bit lost.
I know I has not all the steps in detail and if you are without and OTA update you need to search but otherwise feel free to ask and I will try to assist to make it complete if I can.
Downunder35m said:
While trying to create my first ever Android firmware I had solve several problems, especially if you consider that I prefer under Windows instead of Linux.
I won't go into too many details as I have to assume everyone attempting this did at least some reading on the general how to of firmware installations and modifications.
Things you need:
Original firmware for your device as a IMG file
Amlogic's Customisation tool
A Rom Kitchen of your choice (I use Carliv)
System_Extractor-WIN-master
Some time...
Step1: Load the firmware into the AML tool and tick all boxes except the last one.
In the tmp folder you will find the unpacked files.
Under Level one are the files we want.
You will see a bunch of "PARTITION" files, we copy the following ones into a seperate folder for further use to create the ZIP.
I suggest to name the folder "Install" so we are all on the same page here.
boot.partition
bootloader.partition
logo.partition
recovery.partition
If you checked a flashable ZIP update before you will notice some files are missing, let's try to fix that.
Rename all partition files you copied to img, so instead of boot.partition you get boot.img.
Unpack the boot.img with your kitchen.
You will find a file "boot.img-second" - copy that into your install folder and rename it to dtb.img.
Inside the unpacked ramdisk (In your kitchen) of the boot.img you will fing the "file_contexts" file - copy that into your install folder as well.
Most AML firmware I had so far used a system.new.dat and a system.transfer.list to create the system partition.
We can create them from the system.partition file after renaming to system.img in System_Extractor-WIN-master .
To do this the system.img needs to be unpacked and we need again a copy of the file_contexts.
After the image is unpacked we can pack it again as system.new.dat and system.transfer.list.
The last missing bits can be tricky though as now we need a META-INF folder that works for our device in question.
There are two way to fix that.
Method one:
Search the usually chinese websites using Google to find original firmware for your device.
Chance are that you will find something like an OTA update - in there you will find what you need.
Method two (I never tested that):
Take the META-INF folder from an OTA update of a box with identical hardware specs.
Most important part here is the memory configuration so for a 2/16GB box you need a 2/16GB OTA update.
Next of same importance is the WiFi/Bluetooth config.
If you only have Wifi than an update for a box With daul wifi and BT4.0 won't help you.
If the actual Wifi chip is a different one but CPU, GPU, Memory and connections are the same it should still work.
Once you have the META-INF folder included into your Install folder the firmware is ready to be zipped - in theory!
The X96 for example uses a hash check for the update and created system partition.
To be able to flash your image you need to know what the original recovery would expect - has check or not.
The updater script within the META-INF folder needs to be updated to match your build.prop details as well hash check/no hash check.
Again, with an original OTA update you will find these infos.
Only if you don't have the OTA and no clue what your updater script and recovery needs you are a bit lost.
I know I has not all the steps in detail and if you are without and OTA update you need to search but otherwise feel free to ask and I will try to assist to make it complete if I can.
Click to expand...
Click to collapse
Thank you for this explanation, but the explanation of the video to better understand everyone
Will see if I can at least add some pics while working on Nougat.
Hello,
Thanks for you tutorial.
I have a h96 Pro+ and the last firmware was a .img file... (Link of the firmware : https://mega.nz/#F!d1tHVZgA!Qc0mAom7FBHT9HDv3rGtGQ )
Is there a good guy who can convert this .img to a .zip file please ?
A lot of users are asking for this, me too and if you can help me to do this it will be really cool and appreciate
Thank you,
Carmin.
Thanks for your explanation im trting to port 7.1.1 to my tv box and i have found one funcional the only troble is the wi fi drivers not working ill give it a try latter today
Sent from my SM-N9300 using Tapatalk
Quick scenario: I am working on a Nook Simple Touch UK ROM zip (now obsolete), trying to get from it the essentials that make it "UK" and move them into/replace similar files (mostly images and documents, but maybe one or two system apps) to the current US version of the ROM so that everything will function properly, but the ROM will have the look and feel (and localization options) of the obsolete UK ROM. There's not a lot to change.
The zips don't open for inspection properly in anything I've tried except 7zip. I can move/overwrite files from one ROM to the other, but there does seem to be a slight compression going on and I have no idea how to stop this. In WinRAR I could, but I don't see any similar option in 7zip. Then the zip contents go into a CWM flashable zip.
Preparing the CWM zip with no changes to the current US ROM gives an error-free flash and a functioning result. But if I change even one file (like the boot splash screen--same name, same file size--until moved), the flash fails almost immediately.
I asked someone about internal checksums before ROMs would install but they did not think there were any on these ROMs. Now I wonder. I don't see anything that looks like a checksum or even a "to do" list.
Have I missed some fundamental step or am I using my tools incorrectly (or the wrong tools)? One last thought, these are "update" zips, if that makes any difference, so on their own they would not wipe user data,for example.
Edit: I think I've got it!
1. Unzip (not just "open") both zips with WinRAR (7zip would not extract the update zips for me)
2. Drag alternate versions of files from one folder to the other
3. Zip up with 7zip
4. Open CWM update zip (just has META-INF folder) and ROM update zip with 7zip
5. Drag contents of ROM update zip to CWM zip.
6. Copy new CWM zip to CWM card and flash.
7. SMILE!
nmyshkin said:
Quick scenario: I am working on a Nook Simple Touch UK ROM zip (now obsolete), trying to get from it the essentials that make it "UK" and move them into/replace similar files (mostly images and documents, but maybe one or two system apps) to the current US version of the ROM so that everything will function properly, but the ROM will have the look and feel (and localization options) of the obsolete UK ROM. There's not a lot to change.
The zips don't open for inspection properly in anything I've tried except 7zip. I can move/overwrite files from one ROM to the other, but there does seem to be a slight compression going on and I have no idea how to stop this. In WinRAR I could, but I don't see any similar option in 7zip. Then the zip contents go into a CWM flashable zip.
Preparing the CWM zip with no changes to the current US ROM gives an error-free flash and a functioning result. But if I change even one file (like the boot splash screen--same name, same file size--until moved), the flash fails almost immediately.
I asked someone about internal checksums before ROMs would install but they did not think there were any on these ROMs. Now I wonder. I don't see anything that looks like a checksum or even a "to do" list.
Have I missed some fundamental step or am I using my tools incorrectly (or the wrong tools)? One last thought, these are "update" zips, if that makes any difference, so on their own they would not wipe user data,for example.
Edit: I think I've got it!
1. Unzip (not just "open") both zips with WinRAR (7zip would not extract the update zips for me)
2. Drag alternate versions of files from one folder to the other
3. Zip up with 7zip
4. Open CWM update zip (just has META-INF folder) and ROM update zip with 7zip
5. Drag contents of ROM update zip to CWM zip.
6. Copy new CWM zip to CWM card and flash.
7. SMILE!
Click to expand...
Click to collapse
Nice job!