sola flashed and now not work, help!!!!! - Sony Xperia P, U, Sola, Go

Hello,
I bull**** with my xperia alone.
I think I accidentally flashed the kernel that was for xperia S.
I think because after flash the phone will not turn over.
Initially holding the volume up and power the phone vibrated, now no longer does.
Now if I attack the usb and hit the power button turns on the red light and nothing else.
How can I recover, help please!
thanks
thanks

Try holding the volume down button and attach sola with USB cable to the pc and if led shows green light, then you might be able to reflash with stock firmware again!!
Sent from my MT27i using xda app-developers app

The led show always red light. Is there another thing i can do?

allicavalli said:
The led show always red light. Is there another thing i can do?
Click to expand...
Click to collapse
then i guess you have bricked your phone !!
try getting fixed it over here by searching the forum for bricked phones or head for Sony and just hope they replace if not at least revive it for you !! as it is your warranty is void now that you have flashed the phone

It's happened to me yesterday while Iwas trying to flash my Xperia p. calm down its just software issue.
What you need :
Fastboot v.9
And prerooted Rom
Now connect you mobile and keep holding volume key up. Try this if fastboot didn't see it mobile try to turn it on and hold the upper volume key. You. Can also try the down key keep trying infill fastboot seen it mobile after that flash the prerooted Rom it's it's should work, good luck
Sent from my LT22i using xda app-developers app

I Did The Exact Same Thing Early on To My friends Phone But fixed It
I Can Help U First Of All Download Flash Tool And Files For our Sola Then Download the Original FTF File
Put The Fle In Firmware And Switch Off The Phone Hold The Volume Dwn Button And Plug The Phone
The Phone Wil Go In Flash Mode
Thn Press Flash And Ok
THe New Firmware And Kernel Wil Flash Over THe Old One And Everything Wil Be Fine
Message Me If U Need More Help :good:
Here Is The Link For The Firmware
http://forum.xda-developers.com/showthread.php?t=1673229
And The Phone Support Files That Are Neede To Be Added In Device

Here Are The Support Files Use Flash Tools

Thanks very much for help me. Tonight i try to do and then tell you if it works.

Thankx Ashwin U Just Saved My Life Thankxx U Lot
Wil Try Ad tel u
Cheers

My sole don't connect with flashtool.
Now when i try to switch on the red light pulse for few second and then stop.
do you have other solutions?

Related

How to put phone in flash mode

Hello, Im trying to flash my phone with Jerpelea`s tutorial, but I cant put this phone in Flash mode, it says to hold the Back button after power it off, but it seems to have no effect at all...
also hold the back buttom while powering the phone doesnt work...
can someone help me please??
Hold back button down first then plug USB in and continue to hold back button
Hello A have the same problem is there a other whay?
Thanks
you have to switch the phone off.. take out the battery for 5 seconds (min).. then.. this is the bit you need three hands for... you need to hold the back button whilst plugging in the USB cable.. continue to hold the back button until the software tells you to let go..
Whill this work for de x10i ??
Resisting the temptation for sarcasm....
Yes, it's the x10i method.
Sent from my X10i
Sorry, I don't understand.. because on my x10 with froyo beta2 hotfix1 of zdzihu, this method does not work...
Italiano38 said:
Sorry, I don't understand.. because on my x10 with froyo beta2 hotfix1 of zdzihu, this method does not work...
Click to expand...
Click to collapse
There is only only method for the X10a/i/mini/mini pro/1.6/2.1/2.2 into flashmode, as Mr Iceman has already explained, if it doesn't work for you you're doing something wrong or your phone is broke. To save having to use 3 hands, plug the lead into the phone first, then attaching it to the PC is a much simpler task.
Oki, thank you, I will test it later because I have a bigger problem like I said here: http://forum.xda-developers.com/showthread.php?p=10781800#post10781800
Is this method work for the latest xperia mini pro[SK17i] ?? pliz.. im newbie here..
My xperia sola cannot be put into into flashmode. as i connect the usb while holding the volume down key the green light appear and after 5 seconds the green light is out and change to red one and the phone shows the sony logo.
please help me how to install or connect my xperia sola to flash mode. tnx
tsoytsoy1880 said:
My xperia sola cannot be put into into flashmode. as i connect the usb while holding the volume down key the green light appear and after 5 seconds the green light is out and change to red one and the phone shows the sony logo.
please help me how to install or connect my xperia sola to flash mode. tnx
Click to expand...
Click to collapse
Xperia sola is different than x10
so if you ask in xperia S forums you will get your answer
Teio said:
Hello, Im trying to flash my phone with Jerpelea`s tutorial, but I cant put this phone in Flash mode, it says to hold the Back button after power it off, but it seems to have no effect at all...
also hold the back buttom while powering the phone doesnt work...
can someone help me please??
Click to expand...
Click to collapse
Hey Teio, check if that video works for you, avoid all the information just pay attention on the hardware process:
Turn off phone or take out battery
Conect your USB cable to PC
Open Flashtool
Select Kernel that you wanna flash
Wait for pop up message
Connect your phone
Hold back button
Re Insert Battery
Put Xperia x10 in flash mode
Regards
Press volume down button
radiation626 said:
Is this method work for the latest xperia mini pro[SK17i] ?? pliz.. im newbie here..
Click to expand...
Click to collapse
Since back key is feather touch button it won't work while phone is switched off....., So those phone you should press volume down button instead...
vijay.pushkin said:
Since back key is feather touch button it won't work while phone is switched off....., So those phone you should press volume down button instead...
Click to expand...
Click to collapse
I have the same problem, this metod don´t work in the xperia mini pro[SK17i], 'press volume down button' isn´t recognized
whit a command according to forum 'supported devices' . How can i flash this model of xperia now?

[Q] Please help me..sony xperia u hard bricked..won't even reboot..

Plz hep me..i hard bricked my phone while trying to install cwm recovery on my sony xperia u st25i running ics..i read the article i had found again and realised that recovery was for sony xperia p ics..now my phone is not even starting..it has gone plain dead..when i remove the battery and re insert it,led light for charging flashes orange for a moment and the phone goes dead..please,please help me anyone..i cant afford to have this phone as a paperweight..!!
Can you enter fastboot or flash mode?
Sent from my LT26i using xda app-developers app
krabappel2548 said:
Can you enter fastboot or flash mode?
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
No,i cant enter either of them..my phone does not responds to anything..usb cable or charger..vol. up or vol. down or power..wish had never unlocked my bootloader because than i had never developed intrest in all these procedures..i admit,rooting and flashing custom roms,enjoying a vast range f applications for root was fun alltogether but a very costly one..i know i wont be able to get it replaced because i already voided my warranty by unlocking the f***ing bootloader..!!
xperiavish said:
No,i cant enter either of them..my phone does not responds to anything..usb cable or charger..vol. up or vol. down or power..wish had never unlocked my bootloader because than i had never developed intrest in all these procedures..i admit,rooting and flashing custom roms,enjoying a vast range f applications for root was fun alltogether but a very costly one..i know i wont be able to get it replaced because i already voided my warranty by unlocking the f***ing bootloader..!!
Click to expand...
Click to collapse
But your charging light turns orange? That means you should be able to enter fastboot mode. Did you try removing the battery, leave it out of the phone for like a few minutes to be sure.
Then connect USB cable with volume up, without battery in the phone.
Let me know what you get then
Sent from my LT26i using xda app-developers app
Should i be messing with the test pointers to get this undone via hardware..or i should stick to software manipulations using diffrent combos..i hve removed the battery 10 minutes ago,i guess all the capacitor power will be gone by now..so what next should i do..??
xperiavish said:
Should i be messing with the test pointers to get this undone via hardware..or i should stick to software manipulations using diffrent combos..i hve removed the battery 10 minutes ago,i guess all the capacitor power will be gone by now..so what next should i do..??
Click to expand...
Click to collapse
First off calm down and think clearly. I hardbricked my S but revived it. First off the recovery should be related to the kernel. Put your battery in and hold volume up and power for ten seconds. Then let it chill for a few minutes. Then try and enter fastboot so you can flash a new kernel. I have NEVER EVER found a phone that couldnt be revived from brick and I have rooted and modded at least 15 different models and manufacturers. It can be done, you just need patience. Fastboot mode is the way to revive a device and once you get the proper kernel on you should be okay. Just keep trying to enter fastboot. Dont run your battery out all the way though, since sometimes you can get it to low the phone cant charge and the charge mode is related to kernel.
I do have same problem, please help me.
mrsatan said:
First off calm down and think clearly. I hardbricked my S but revived it. First off the recovery should be related to the kernel. Put your battery in and hold volume up and power for ten seconds. Then let it chill for a few minutes. Then try and enter fastboot so you can flash a new kernel. I have NEVER EVER found a phone that couldnt be revived from brick and I have rooted and modded at least 15 different models and manufacturers. It can be done, you just need patience. Fastboot mode is the way to revive a device and once you get the proper kernel on you should be okay. Just keep trying to enter fastboot. Dont run your battery out all the way though, since sometimes you can get it to low the phone cant charge and the charge mode is related to kernel.
Click to expand...
Click to collapse
Hi,
I have installed successfully Dynamic rom on my xperia u, It worked like charm initiailly, but after few hours when I restarted the device its not booting, Just stuck with sony logo, not proceeding further . Fortunately :victory: it enters fastboot mode and even flashmode, kindly help me how can I recover my phone ?
aktherraza said:
Hi,
I have installed successfully Dynamic rom on my xperia u, It worked like charm initiailly, but after few hours when I restarted the device its not booting, Just stuck with sony logo, not proceeding further . Fortunately :victory: it enters fastboot mode and even flashmode, kindly help me how can I recover my phone ?
Click to expand...
Click to collapse
Download and flash a stock firmware using flashtool and be careful about what Rom you flash on your phone always.
Tapatalked !
Rapier07 said:
Download and flash a stock firmware using flashtool and be careful about what Rom you flash on your phone always.
Tapatalked !
Click to expand...
Click to collapse
Hi,
I'll be thankful to you If you can point to a guide to use flash tool to achieve this.
Download official ics ftf from development section of ur xperia
Download flashtool
Install flashtool
Go to c/flashtool/drivers
Install drivers for ur xperia
Now switch of ur phone keep it aside
Go to flashtool
Click thunder icon
Select flashmode
Select ftf
Check no final verification
Check exclude ta
Click flash\start
Now it will ask u to connect ur phone in flashmode
Press the volume down button, keep it pressed and connect to usb
Flashing will start
Let it complete
U r done wait for flashing
By Dr.sanket
Sent from my ST25i using Tapatalk 2
Hurray
Rajul said:
Download official ics ftf from development section of ur xperia
Download flashtool
Install flashtool
Go to c/flashtool/drivers
Install drivers for ur xperia
Now switch of ur phone keep it aside
Go to flashtool
Click thunder icon
Select flashmode
Select ftf
Check no final verification
Check exclude ta
Click flash\start
Now it will ask u to connect ur phone in flashmode
Press the volume down button, keep it pressed and connect to usb
Flashing will start
Let it complete
U r done wait for flashing
By Dr.sanket
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
Thanks all of you for the help, My phone's soul restored ! :victory:
help help
mrsatan said:
First off calm down and think clearly. I hardbricked my S but revived it. First off the recovery should be related to the kernel. Put your battery in and hold volume up and power for ten seconds. Then let it chill for a few minutes. Then try and enter fastboot so you can flash a new kernel. I have NEVER EVER found a phone that couldnt be revived from brick and I have rooted and modded at least 15 different models and manufacturers. It can be done, you just need patience. Fastboot mode is the way to revive a device and once you get the proper kernel on you should be okay. Just keep trying to enter fastboot. Dont run your battery out all the way though, since sometimes you can get it to low the phone cant charge and the charge mode is related to kernel.
Click to expand...
Click to collapse
i need help just hard brick my xperia s .... no led no fastboot no flashboot....no logo.... nothing at all and i was with 80% battery please mailme at this direction [email protected] i trully need help i dont know what to do anymore
Post your own thread instead of necroing an old one will help. Also saying what happened before the phone died will also help.
Anyway, hold vol up + power for 20 seconds and see if you can get it to vibrate.
If so, after the 3rd vibrate, quickly hold vol down, then jam the USB cable in.
You are now in flashboot. Flash a stock ftf and you should be fine.
links plz
Rajul said:
Download official ics ftf from development section of ur xperia
Download flashtool
Install flashtool
Go to c/flashtool/drivers
Install drivers for ur xperia
Now switch of ur phone keep it aside
Go to flashtool
Click thunder icon
Select flashmode
Select ftf
Check no final verification
Check exclude ta
Click flash\start
Now it will ask u to connect ur phone in flashmode
Press the volume down button, keep it pressed and connect to usb
Flashing will start
Let it complete
U r done wait for flashing
By Dr.sanket
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
plz can i get a link for ftf file for my xperia u.....thnx
Rajul said:
Download official ics ftf from development section of ur xperia
Download flashtool
Install flashtool
Go to c/flashtool/drivers
Install drivers for ur xperia
Now switch of ur phone keep it aside
Go to flashtool
Click thunder icon
Select flashmode
Select ftf
Check no final verification
Check exclude ta
Click flash\start
Now it will ask u to connect ur phone in flashmode
Press the volume down button, keep it pressed and connect to usb
Flashing will start
Let it complete
U r done wait for flashing
By Dr.sanket
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
Saved my life!
Was stuck into SONY logo after "testing" each CWM function (like the wipe system, etc .. !)
Many thanks!
Xperia U bricked, tried many things but now it gets stuck at "SONY" logo
I am now downloading this http://forum.xda-developers.com/showthread.php?t=1974430 stock ROM. can you suggest which kernel I will have to use to flash the boot partition with. and any steps I have to follow before flashing the stock ROM using flashtool ?
Background:-
I rooted my phone then unlocked the bootloader the official way.
Installed CM9. worked fine
Then I wanted to back to stock ROM (for some xyz reason)
I got a vodafone image and recovered the phone by flashing it but touchscreen was not working.
I think I have messed up a lot and now I cant get the CM9 working also (touchscreen doesnt work)
Touchscreen not working, is it a software or hardware related ?
I still believe if its software related it can be fixed somehow.
Thanks.
Rajul said:
Download official ics ftf from development section of ur xperia
Download flashtool
Install flashtool
Go to c/flashtool/drivers
Install drivers for ur xperia
Now switch of ur phone keep it aside
Go to flashtool
Click thunder icon
Select flashmode
Select ftf
Check no final verification
Check exclude ta
Click flash\start
Now it will ask u to connect ur phone in flashmode
Press the volume down button, keep it pressed and connect to usb
Flashing will start
Let it complete
U r done wait for flashing
By Dr.sanket
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
the ftf file includes the kernel, just flash.
Sent from my Xperia Arc S using xda premium
Thanks. But do you think the touchscreen issue is just due to wrong ROM or could it be hawdware ?
tangosierra_ said:
the ftf file includes the kernel, just flash.
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
It should be ROM issue, I remember seeing this problem in the arc forums too
Sent from my Xperia Arc S using xda premium
Cool. I'll try to flash the ROM. Is there a need to clear the cache and system portions ?
Sent from my Nexus 7 using xda app-developers app

[Xperia U] boot loop/soft brick

While updating a new Xperia U to ICS the PCC had an error while flashing the new firmware. Now the screen lights up, the sony logo is shown for ~3-5 seconds and then it reboots.
After that I have been unable to get it recognized again by either PCC/SUS or flash tool.
I also checked my log files in Linux and no device appears.
I've tried 3 different machines (2x Windows 8, 1x Win 7), multiple USB ports. Also leaving the battery out for ~30 mins didn't change the behavior.
The green light for download mode comes on, but after about 5 seconds the light goes out and it goes into the boot loop again.
So by now I believe the device needs to be sent in, but maybe some one has a few more things I can try.
Try pressing the volume down plus volume up plus power button all 3 simultaneously till u feel 3 vibrations
Sent from my ST25i using Tapatalk 2
Can you make sure the Flashtool drivers are installed ? Go to Flashtool Directory, open drivers directory and start the setup.. Make sure to select the Flashmode and Fastboot drivers are also selected. Then, reboot System and folow this order.
Startt flashtool,select f/w, wait for Flashtool to tell you to connect to device. Then, holding the Volume down button (while phone is switched off), plug the cable into phone (The usb cable must already be connected to PC before starting the Flash Procedure )
The Order is very important.. I had same issue with U (althoguh mine crashed with Flashtool and same as what you observed. When I followed this order, I was able to get it detected and flashed )
Hopefully, you wont need to return to Service Center
let me know how it goes
Cheers ! & Merry Christmas
And yes I forgot to mention
Wrong section
Plz use question n answer section next tym
Sent from my ST25i using Tapatalk 2
drsanket_xperia_u said:
Try pressing the volume down plus volume up plus power button all 3 simultaneously till u feel 3 vibrations
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
No response, I've tried holding all three buttons for a minute, but it doesn't vibrate after turning on. The only way I can turn it off is by removing the battery.
Min3r said:
Can you make sure the Flashtool drivers are installed ? Go to Flashtool Directory, open drivers directory and start the setup.. Make sure to select the Flashmode and Fastboot drivers are also selected. Then, reboot System and folow this order.
Startt flashtool,select f/w, wait for Flashtool to tell you to connect to device. Then, holding the Volume down button (while phone is switched off), plug the cable into phone (The usb cable must already be connected to PC before starting the Flash Procedure )
The Order is very important.. I had same issue with U (althoguh mine crashed with Flashtool and same as what you observed. When I followed this order, I was able to get it detected and flashed )
Hopefully, you wont need to return to Service Center
let me know how it goes
Cheers ! & Merry Christmas
Click to expand...
Click to collapse
I tried that right now, Flashmode and Fastboot drivers are installed. Flash tool is ready, device is plugged in with volume down pressed, green light comes on. Nothing is found on the PC, after about 5 seconds the green light turns off and the phone shows the sony logo. Green light also comes on if i simply plug in the usb without volume down pressed. So I'm thinking, the download mode has some how been corrupted?
drsanket_xperia_u said:
And yes I forgot to mention
Wrong section
Plz use question n answer section next tym
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
Sorry about that, maybe a moderator can move my topic to the right section.
Are u connecting it properly???
Make sure when u connect ur cell to ur pc u have nt presed the power key
keep the phone off
Press the volume down button ( keep it pressed, dun
leave it) and connect it to the usb
U will see green light
Darn.. That looks bad.. That did it for me on every occasion. I think you might have a hardbrick due to the interrupted write cycle so I dont think any other way except to take it to Service Center
Sorry I couldnt help
drsanket_xperia_u said:
Are u connecting it properly???
Make sure when u connect ur cell to ur pc u have nt presed the power key
keep the phone off
Press the volume down button ( keep it pressed, dun
leave it) and connect it to the usb
U will see green light
Click to expand...
Click to collapse
Exactly what I'm doing and the green light does come on. Except it decides to go into a boot loop after it apperantly boots into download mode but doesn't stay there.
Min3r said:
Darn.. That looks bad.. That did it for me on every occasion. I think you might have a hardbrick due to the interrupted write cycle so I dont think any other way except to take it to Service Center
Sorry I couldnt help
Click to expand...
Click to collapse
That's what I've been fearing. In which case it goes back to the seller in the hope that he will send me a new device.
Moved
Is there any chance of properly reactivating flashmode by using a JTAG?
Cebalrai said:
Is there any chance of properly reactivating flashmode by using a JTAG?
Click to expand...
Click to collapse
Risky business
Jtag. ...used for hard bricked devices n. Seen max to work wid samsung phones only....
Wont recommend u too open up ur xu
Let the service center try first
Sent from my GT-N7000 using Tapatalk 2
Have you manage to recover your phone without taking it to service?
I'm in the exactly same situation... Any help is welcome...
While trying to enter flashmode, green light turns on but after some secs it turns off and sony logo appears on screen. any chance to recover this beautiful brick ?
thanks
After several tries (a lot of...) I manage to enter flashmode and SUS is now reinstalling sony ROM.
Honestly I don´t know how it works this time and not the others but i'm happy with it independently of what happens.
... seems flashtool is detecting ur phone try to flash first the stock kernel and do not wipe everything it shud be in timing though.. onces it is flash charge ur phone in kernel mode (phone is off) then you can flash the stock fw of ur XU.
I bricked my phone
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 20secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
adithyasailesh said:
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 20secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
Click to expand...
Click to collapse
No worries. The phone turns off because it doesn't receive any signal from the PC - many people make the mistake of connecting the device in flashmode first, and then they start the flashtool etc.
Instead, load the flashtool first, go to flashmode, select a complete/full stock ftf for your phone (whichever version you want, but do double check if the ftf has kernel.sin file in it) and press the flash button. Only once you get the pop up with the animation telling you to connect the phone in flash mode, connect the phone in flashmode (volume - button pressed when connecting cable). As soon as you connect the phone, the flashtool will start its magic and your phone won't turn off.
if you can go in cwm wipe system then you will only be stuck on sony logo then use this guide http://www.youtube.com/watch?v=hPPWRXcsz7g.....it will work because this same happened to me and i fixed it with this method!
-------------------------------------------------------------------
press thanks if i helped
-------------------------------------------------------------------
using xperia u
locked bootloader
jb experience v2.1 rom

[Sola] Xperia Sola Won't Turn On (Advanced)

I know, I know that this question has been always on the forums but mine is different. It really won't open!
Tried the hard reset thing, nope it doesn't work at any combo.
Flashtool? Nope it won't work. PC never detected it. Pressing the volume up / down button won't work so is the camera and the power before plugging, during, and after the USB.
I don't know what else to do!! :
I need your help experts And no, I don't want to send it to repair centers
zx12cv34 said:
I know, I know that this question has been always on the forums but mine is different. It really won't open!
Tried the hard reset thing, nope it doesn't work at any combo.
Flashtool? Nope it won't work. PC never detected it. Pressing the volume up / down button won't work so is the camera and the power before plugging, during, and after the USB.
I don't know what else to do!! :
I need your help experts And no, I don't want to send it to repair centers
Click to expand...
Click to collapse
Hard power off works??
Sent from my Galaxy Nexus using xda app-developers app
Sherwinnn said:
Hard power off works??
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
hard power off not working as well as PC Companion / SUS / flashtool unable to detect it.
when you try to plug it in the red LED works
EDIT: while plugging it in, the red LED disappears instead of turning into color green (fully charged)
Try to leave it on and connected with flashtool and watch the flashtool window. It helped me once when I messed flashing. Flashtool it detectrd after one or two minutes and I flashed stock tft.
Sent from my MT27i using xda app-developers app
matood said:
Try to leave it on and connected with flashtool and watch the flashtool window. It helped me once when I messed flashing. Flashtool it detectrd after one or two minutes and I flashed stock tft.
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
but it's working great before it. it just turned out to be like that when I was changing the sim card.
tried flashtool but i can't connect the phone. i'm in the part where you have to press the back button (volume - or +) when connecting it.
Dont try flash, just turn on, eg hatd reset (volume up+power on/off button) and let it connected, dont try go to cwm. Just let it lets say boot, I know, screem is dark but after while youll see in flashtool main window that phone is detected, it took me one or two mins to get it. Then you can try fastboot and flash correct kernel. And try to remove the SIM card or insert the old one.
Sent from my MT27i using xda app-developers app
matood said:
Dont try flash, just turn on, eg hatd reset (volume up+power on/off button) and let it connected, dont try go to cwm. Just let it lets say boot, I know, screem is dark but after while youll see in flashtool main window that phone is detected, it took me one or two mins to get it. Then you can try fastboot and flash correct kernel. And try to remove the SIM card or insert the old one.
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
it really won't turn on no matter what I try and no, the screen isn't the problem. there's not even a backlight
Give proper details!!!
Rom,
kernel,
where able to connect to PC suite before this problem ,
How did it happen?
And what is happening like boot lap or stuck on boot screen , not turning on???
What exactly is the problem ???
Let me tell u one thing about what you said in ur post about hard reset any combination of keys didn't work... you know y didn't they?? Cause their ain't none ... No combination keys are available for hard reset cause it ain't symbian Nokia
Sent from my Xperia Sola using xda premium
seems a hardware problem then ...
When you reset, power on/off button+volume up, does it vibrates I think 3 times?
Sent from my MT27i using xda app-developers app
soulhackereborn said:
Give proper details!!!
Rom,
kernel,
where able to connect to PC suite before this problem ,
How did it happen?
And what is happening like boot lap or stuck on boot screen , not turning on???
What exactly is the problem ???
Let me tell u one thing about what you said in ur post about hard reset any combination of keys didn't work... you know y didn't they?? Cause their ain't none ... No combination keys are available for hard reset cause it ain't symbian Nokia
Sent from my Xperia Sola using xda premium
Click to expand...
Click to collapse
hard reset combos: power + vol up / power + vol down / vol up + vol down / power + vol up + vol down. I've tried them all. not a newbie here so don't treat me like one please
rom + kernel = pure blood sola v2. i don't think it's the rom's fault tho since my sister has the same rom and her's works like a charm. the rom has been in the phone for more than 2 months without any problems (my phone's). files are accessible and photos are transferable.
How did the problem arise? everything was working great till i changed the sim card. then poof! it won't work anymore. to be honest it wasn't my phone. i'm just trying to fix it
not turning on. no power. no backlights meaning its not the display problem. when you plug it in via usb / wall charger there's a red LED but after an hour it disappears.
really need your help guys
could work
I have a Xperia U and triying to port JB to it I briked two or three times.
I hold power botom and it vibrate and doesnt happen anything ok.?¿
The possible solution could be this(for my works)
Charge the phone like 1 hour for my doesnt charge with the animation but its for security.
With the nest steps you are going to lose all CWM and tweaks and apks but personal data still there.
You have two options:
Flash a new rom with flashtool, but when you pluged with volum - you hold it for allmost all process becose for my i conect to PC and its goes quikly so i cant do annything.
If the phone is not recognised by Flashtool:
You have to repair it with PC Companion or Bridge for Mac, and also the same hold volum - almost all process.
For my it works, tell my if for you works:cyclops::cyclops::cyclops:
matood said:
When you reset, power on/off button+volume up, does it vibrates I think 3 times?
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
hay i have the same problem and yes it dose so what to do ???
Same problem here..
Anyone?
--EDIT
Problem solved
i have encounter the same problem but i after i read this post, i revive again my phone, by just flashing the original kernel using flashtool and hold the fastboot key or the volume up key until the flashing was finished,

Please help

Suddenly my sola stopped working, i tried flash tool hard reset and all but it is not working and not getting detected.
Please say me what to do. Im a bit worried please help me fast :crying::crying::crying:
press volume up plus power key till u feel 3 vibrations
then follow
sometimes it may take upto 30seconds
http://forum.xda-developers.com/showthread.php?t=2023135
Also make sure ur sola is charged properly
Sent from my Xperia U using Tapatalk 2
drsanket_xperia_u said:
press volume up plus power key till u feel 3 vibrations
then follow
sometimes it may take upto 30seconds
http://forum.xda-developers.com/showthread.php?t=2023135
Also make sure ur sola is charged properly
Sent from my Xperia U using Tapatalk 2
Click to expand...
Click to collapse
i have tried it all but its not working, i haven't tried 30 seconds will try it now..
before ant of this happened the charging was around 70.
drsanket_xperia_u said:
press volume up plus power key till u feel 3 vibrations
then follow
sometimes it may take upto 30seconds
http://forum.xda-developers.com/showthread.php?t=2023135
Also make sure ur sola is charged properly
Sent from my Xperia U using Tapatalk 2
Click to expand...
Click to collapse
i have took it to a service center they said that battery boosting is also not happening what should i do plzzz help me..
holding the hard reset combination for around 2 minutes and still holding
so u bought it back from service center??? u should have given it to them...
aint it under warranty?
Sent from my Xperia U using Tapatalk 2
drsanket_xperia_u said:
so u bought it back from service center??? u should have given it to them...
aint it under warranty?
Sent from my Xperia U using Tapatalk 2
Click to expand...
Click to collapse
it is under warranty and just less than a month old. I didn't bring it back they only gave it to me back saying they cant do it
saratsarat7 said:
it is under warranty and just less than a month old. I didn't bring it back they only gave it to me back saying they cant do it
Click to expand...
Click to collapse
They cant do it? Then ask them who can, after you are under warranty...
mirost1 said:
They cant do it? Then ask them who can, after you are under warranty...
Click to expand...
Click to collapse
I got it as a gift from my sister from Singapore and they are saying that it cant be done here.. need to search another service center, sir if you know any one or any method that can make my phone alive again please say me or any link to any post with my problem, i am searching now and if you know any other things please help me..
Thank you
saratsarat7 said:
I got it as a gift from my sister from Singapore and they are saying that it cant be done here.. need to search another service center, sir if you know any one or any method that can make my phone alive again please say me or any link to any post with my problem, i am searching now and if you know any other things please help me..
Thank you
Click to expand...
Click to collapse
any help plzzzzz
saratsarat7 said:
i have tried it all but its not working, i haven't tried 30 seconds will try it now..
before ant of this happened the charging was around 70.
Click to expand...
Click to collapse
And what was the problem, did the led flash or you got an error?
Sent from my MT27i using xda app-developers app
matood said:
And what was the problem, did the led flash or you got an error?
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
no i was just charging my mobile and after some time when i saw it there was no response at all.. i tried all the tools but nothing happened even the charging led is not blinking.
i am using project gx gaming rom and provided kernel and suddenly this happened please help every thing was so normal before and i don't know when this happened suddenly
saratsarat7 said:
no i was just charging my mobile and after some time when i saw it there was no response at all.. i tried all the tools but nothing happened even the charging led is not blinking.
i am using project gx gaming rom and provided kernel and suddenly this happened please help every thing was so normal before and i don't know when this happened suddenly
Click to expand...
Click to collapse
That rom is using overclocked kernel, that should be the problem,... But one try.
Just switch off (volume up and power until 3 vibrations), just in case, the open flashtool, click on that flash and select fastboot mode.
Then keep volume up and connect with pc and see if the led goes violet.
matood said:
That rom is using overclocked kernel, that should be the problem,... But one try.
Just switch off (volume up and power until 3 vibrations), just in case, the open flashtool, click on that flash and select fastboot mode.
Then keep volume up and connect with pc and see if the led goes violet.
Click to expand...
Click to collapse
sir there is no led notification on the mobile, i can change the kernel if that rom doesn't support if only i can be back to stock.
can we go to fast-boot without doing anything ?? What do u think happened to my device
saratsarat7 said:
sir there is no led notification on the mobile, i can change the kernel if that rom doesn't support if only i can be back to stock.
can we go to fast-boot without doing anything ?? What do u think happened to my device
Click to expand...
Click to collapse
If ypu tried and it did nothing it means it not entering fastboot and probably your device is bricked and my guess is overclocked kernel, but it's just a guess.
Have you tried what i wrote you??
matood said:
If ypu tried and it did nothing it means it not entering fastboot and probably your device is bricked and my guess is overclocked kernel, but it's just a guess.
Have you tried what i wrote you??
Click to expand...
Click to collapse
Mobile is already switched off and when i try to hard reset it nothing is happening, i have tried the combination of all the buttons and nothing ever happened no vibration at all and using the flash tool in flash mode the lights are not coming.
If in your case the mobile is bricked what should i be possibly doing ??
matood said:
If ypu tried and it did nothing it means it not entering fastboot and probably your device is bricked and my guess is overclocked kernel, but it's just a guess.
Have you tried what i wrote you??
Click to expand...
Click to collapse
Is it possible to flash anther kernel in any other way ?? and to say that the battery led is also not showing up, is it because of the kernel ??
i have been using that rom for more about 10 days and everything was fine then..
saratsarat7 said:
Mobile is already switched off and when i try to hard reset it nothing is happening, i have tried the combination of all the buttons and nothing ever happened no vibration at all and using the flash tool in flash mode the lights are not coming.
If in your case the mobile is bricked what should i be possibly doing ??
Click to expand...
Click to collapse
Just try only one combination, keep volume up button and connect to pc, this way it connect in fastboot mode. If the led doesnt even blink, the phone is hard bricked probably. And then only warranty might help...
But try what I ask you do before...
matood said:
Just try only one combination, keep volume up button and connect to pc, this way it connect in fastboot mode. If the led doesnt even blink, the phone is hard bricked probably. And then only warranty might help...
But try what I ask you do before...
Click to expand...
Click to collapse
i have tried it, i have been pressing the volume up and power button for about 5min and no vibrations are felt..
i went to one of the sony service centers my home and they said that battery boosting is also not happening and they returned it back to me, when i connect to the computer using flash tool led doesn't blink may be then the mobile is hard bricked ??
no other way to solve the problem sir ??
saratsarat7 said:
i have tried it, i have been pressing the volume up and power button for about 5min and no vibrations are felt..
i went to one of the sony service centers my home and they said that battery boosting is also not happening and they returned it back to me, when i connect to the computer using flash tool led doesn't blink may be then the mobile is hard bricked ??
no other way to solve the problem sir ??
Click to expand...
Click to collapse
Once again
1. If you hold, not keep pressing but hold volume up+power then 1 vibration is reboot and if you keep holding them 3 vibrations is switch off.
2. I asked you something else, start flashtool, press flash and choose fastboot.
Then, your phone is off you said, hold only volume up button, HOLD and CONNECT to pc. If you led blinks violet you are in fastboot mode,
If not just let it connected to flash tool, close the window from fastboot with options and watch the main flashtool window if you will see some report.
Just watch for 10min if not, then...
matood said:
Once again
1. If you hold, not keep pressing but hold volume up+power then 1 vibration is reboot and if you keep holding them 3 vibrations is switch off.
2. I asked you something else, start flashtool, press flash and choose fastboot.
Then, your phone is off you said, hold only volume up button, HOLD and CONNECT to pc. If you led blinks violet you are in fastboot mode,
If not just let it connected to flash tool, close the window from fastboot with options and watch the main flashtool window if you will see some report.
Just watch for 10min if not, then...
Click to expand...
Click to collapse
Volume up + power nothing is happening and the below is the log for flash tool
12/038/2013 22:38:05 - INFO - <- This level is successfully initialized
12/038/2013 22:38:05 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-13 22:53:30
12/038/2013 22:38:05 - INFO - You can drag and drop ftf files here to start flashing them
12/038/2013 22:38:10 - INFO - Device disconnected
12/038/2013 22:38:17 - INFO - Launching Fastboot Toolbox 1.0 by DooMLoRD
12/038/2013 22:38:17 - INFO - Device Status: NOT FOUND
12/038/2013 22:38:52 - INFO - Finished Fastboot Toolbox
what should i do now ??

Categories

Resources