[fastboot] Razr XT910 672.180.291.XT910.AmericaMovil.en.01 ICS Firmware download - Motorola Droid RAZR

To install ICS 4.0.4 to your Razr XT910, kindly follow simple steps below:-
A. PREPARING PHONE, INSTALL PROGRAM & DRIVER
1. Backup phone data
Apps & Data ( Phone must be rooted ) - use Titanium Backup ? root
SMS - use SMS backup & restore
Call logs - use Call Logs Backup & Restore
Photos & files on Phone Memory - Use Windows Explorer
Fully charge battery - at least 60%
2. Install Motorola USB driver - search developers.motorola.com
3. Install Latest RSD Lite - Google for it
Click to expand...
Click to collapse
B. INSTALLING ANDROID 4.0.4 ICS 672.180.291.XT910.AmericaMovil.en.01
1. Turn off phone
2. Hold both Volume Up & Volume Down then press power button
3. When you see RED MOTOROLA logo, wait 5 seconds
4. Now press both Volume Up & Volume Down button
5. Now use Volume Down button to scroll and use Volume Up button to confirm selection
6. Select AP Fastboot
7. Connect phone to PC and run RSD Lite
8. Now extract the Blur_Version.672.180.291.XT910.AmericaMovil.en.01.xml.zip by enter password
9. Go back RSD Lite, open Blur_Version.672.180.291.XT910.AmericaMovil.en.01.xml
Please take note that you can't roll back Gingerbread after ICS firmware update
Click to expand...
Click to collapse
10. Hit Start button to flashing ICS firmware
11. Wait about few minutes until phone fully reboot
12. Check RSD Lite "Status", if it prompt "Passed" then remove usb cable
13. Profit
14. Congrats you've successfully updated phone software.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Blur_Version.672.180.291.XT910.AmericaMovil.en.01.xml.zip
>> Original Thread.

ICS upgrade applicable to the following LATAM Countries & Carriers:-
1. Argentina - Claro - Blur_Version.651.167.3370.XT910.AmericaMovil.en.01
2. Caribbean - Claro Dominicana - Blur_Version.651.167.3370.XT910.AmericaMovil.en.01
3. Caribbean - Claro - Puerto Rico - Blur_Version.651.167.3370.XT910.AmericaMovil.en.01
4. Colombia - Comcel - Blur_Version.651.167.3362.XT910.AmericaMovil.en.01
Click to expand...
Click to collapse
Unsure about the following LATAM countries & Carriers:-
1. Chile - Claro -Blur_Version.651.167.3341.XT910.AmericaMovil.en.01
2. Peru - Claro - Blur_Version.651.167.3341.XT910.AmericaMovil.en.01
3. Costa Rica - Claro -
Click to expand...
Click to collapse
USE AT YOUR OWN RISK !

Do you have the one for mexico
americamovil.en.mx ¿¿¿???
Enviado desde mi XT910 usando Tapatalk 2

so this is basicly telcel's official razr ICS rom
i really dont think this one is faster than latam version, just compare the version number, this one is older than latam.
----
entonces este es el rom oficial de telcel?
la verdad no creo que sea tan rapido ni mejor que la version latam la version de este build es mas vieja que la latam.

Jaocagomez said:
so this is basicly telcel's official razr ICS rom
i really dont think this one is faster than latam version, just compare the version number, this one is older than latam.
----
entonces este es el rom oficial de telcel?
la verdad no creo que sea tan rapido ni mejor que la version latam la version de este build es mas vieja que la latam.
Click to expand...
Click to collapse
I dont think is Telcel oficial. Becauz Telcel México is AmericaMovil Just that, this is AmericaMovil.en.01
Enviado desde Motorola RAZR XT910 con Axi0m Infektion usando Tapatalk 2

Jaocagomez said:
so this is basicly telcel's official razr ICS rom
i really dont think this one is faster than latam version, just compare the version number, this one is older than latam.
----
entonces este es el rom oficial de telcel?
la verdad no creo que sea tan rapido ni mejor que la version latam la version de este build es mas vieja que la latam.
Click to expand...
Click to collapse
It's not ICS update for Blur_Version.651.167.3361.XT910.AmericaMovil.en.MX.

Links are down
kent_lkc said:
To install ICS 4.0.4 to your Razr XT910, kindly follow simple steps below:-
A. PREPARING PHONE, INSTALL PROGRAM & DRIVER
B. INSTALLING ANDROID 4.0.4 ICS 672.180.291.XT910.AmericaMovil.en.01
1. Blur_Version.672.180.291.XT910.AmericaMovil.en.01.xml.zip
>> Original Thread.
Click to expand...
Click to collapse
Links are down

kent_lkc said:
ICS upgrade applicable to the following LATAM Countries & Carriers:-
Unsure about the following LATAM countries & Carriers:-
USE AT YOUR OWN RISK !
Click to expand...
Click to collapse
Hi kent_lkc
These firmwares shares same secure level and can be applied over any ICS version to latam devices.
But you should advice folks this is the an older version firmware, the otas we've got to retail.br are newer. But this firmware is really nice to have, same to that vivo you released, just in case someone need to send the device for a repair center.
Nice work, Cheers!

Related

[Q] HUAWEI MediaPad 7 Youth S7-702u

Good morning / afternoon, I have a problem with a MediaPad (S7-702U), does not pass to the startup logo and and and tried the master reset and nothing, I was wondering if anyone had the software stock for this tablet or any solution for this problem.
Many thanks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
picado3 said:
Good morning / afternoon, I have a problem with a MediaPad (S7-702U), does not pass to the startup logo and and and tried the master reset and nothing, I was wondering if anyone had the software stock for this tablet or any solution for this problem.
Many thanks.View attachment 2571931
Click to expand...
Click to collapse
did you solved the problem?
Unfortunately it can not resolve
picado3 said:
Unfortunately it can not resolve
Click to expand...
Click to collapse
try this.
1. Press and hold the power button + volume up + volume down.
2. When you feel the vibration,release the power button.
3. When the Android logo appears, release the volume up.
4. You will see some running lines in the Android logo, hold still the volume down and wait for 10 seconds then release it.
5. Then let it reboot by itself.
6. Hard reseting done.
it work with my s7-702u
picado3 said:
Unfortunately it can not resolve
Click to expand...
Click to collapse
Thanks a Friend from Costa Rica i find a firmware for s7-702u
https://mega.co.nz/#F!e180xRyT!EyBPDfovW6zHPb71Sz_eAg
follow the instructions inside the pdf in zip
Install this and your s7-702u will be operative again
If you need more s7-701u/s7-702u information, goto this post
Can i install s7 702u firmware to s7 701u
hello please somebody can help me..i need the rom for s7-702u because the tablet when boot it stuck in the carrier logo..please only the rom can save me..i know the s7-701u can solve mi problem but that is the problem too i can't install the vrcb.img because the tablet cant boot the problem is no pass from teh carrier logo,,,i tried the rockchip tool ,rk android tool,,,and when i tri¿y to install the s7-701u fw the tool says test device start,test device fail.
help me please, help,thanks.
Chamo, puedes cuadrarme ese sistema? Tengo una s7 702u pero se queda en el logo de movilnet, ya hice el hard reset pero nada... No consigo en monagas nadie que tenga ese soft. Para que me la reviva aunque sea por un ojo de la cara. Adoro mi tablet-celular no podré morir en paz :C
Jota2740 said:
Chamo, puedes cuadrarme ese sistema? Tengo una s7 702u pero se queda en el logo de movilnet, ya hice el hard reset pero nada... No consigo en monagas nadie que tenga ese soft. Para que me la reviva aunque sea por un ojo de la cara. Adoro mi tablet-celular no podré morir en paz :C
Click to expand...
Click to collapse
Descarga el firmware de este enlace
Descomprime el zip y sigue las intrucciones que estan en el pdf

[ROM][10.14291.1001] Windows 10 Mobile Redstone Build

Hello after Microsoft rummor of getting out x20 phones of official w10 mobile and the first Redstone build 14291 for 650 and 950 phones i decided to may a litle hack to phone insider RM and get new 10.14291.1001 build on non supported phone...
ROM works well at the moment, i have dirty flash it from a old win10 build, i need a few reboots for getting it completly updated and working...
Only bug phone is that WIFI after power phone off will need to clik wifi anohter time or input password again, maybe is fall of dirty flash rom.
Video:
General video of build on other phone:
Lumia 920 running 14291:
Screnshoot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Recommend:
Relock bootloader
Clean flash of stock ffu wp8.1 rom update it to lastest wp8.1 rom abalible...
Unlock bootloader and then install rom with WP Internals allways lastest version avalible
Download:
WP Internals:http://forum.xda-developers.com/windows-phone-8/development/windows-phone-internals-unlock-t3257483
ROM:https://mega.nz/#!pk4T2ZSQ!gIVstUuNYqR9_XvGQAuXDbE6hOw_ya2bQrXcXCen3Zk
NOOB GUIDE:http://www.htcmania.com/showthread.php?t=1117738
lo probaré a ver que tal...
Gracias máquina!
dari-woka said:
lo probaré a ver que tal...
Gracias máquina!
Click to expand...
Click to collapse
Como hago el Flash de la Rom
me quede en este paso :
Relock bootloader
Clean flash of stock ffu wp8.1 rom update it to lastest wp8.1 rom abalible...
Unlock bootloader.
Saludos
edmajeja said:
Como hago el Flash de la Rom
me quede en este paso :
Relock bootloader
Clean flash of stock ffu wp8.1 rom update it to lastest wp8.1 rom abalible...
Unlock bootloader.
Saludos
Click to expand...
Click to collapse
Do not speak spanish because they are going to penalize you at least use the two lenguages...
No uséis español porque os van a penalizar en xda , ya que el ingles es la lengua oficial del foro, si usáis las dos creo que no pasa nada
En este link esta todo puesto en español: http://www.htcmania.com/showthread.php?t=1117738
what would happen if there was an update released for redstone? would it put the phone in any risk of being bricked?
WewLads said:
what would happen if there was an update released for redstone? would it put the phone in any risk of being bricked?
Click to expand...
Click to collapse
Is supposed that as originally 920 is not supported it will not update , but allways there is a risk, put manually update and wiat for feedback in the case this happens
Is it rooted/rootable?
After flash i stuck in Nokia logo, and i must recovery my Lumia 920 back to 8.1. :crying:
Good morning , when Microsoft releases updates, you also get the crucial rom ?
barabl said:
After flash i stuck in Nokia logo, and i must recovery my Lumia 920 back to 8.1. :crying:
Click to expand...
Click to collapse
Ohh maybe they have block this update method rom....
You can still use redstone changing RM to 950 one
Stop in logo nokia
hi,
i'd flash my lumia 920 with rom 10.14291.1001 and it stop to nokia logo !!!
do you have an idea?
thanks !!!
jjcaix said:
hi,
i'd flash my lumia 920 with rom 10.14291.1001 and it stop to nokia logo !!!
do you have an idea?
thanks !!!
Click to expand...
Click to collapse
I think tehy have bolck thsi method so we cant used it change rm for recive redstone build
Hello werty100, I have a Lumia 1020, and I saw there is no activity in its forum. Could you do a Redstone ROM for this phone? At least, the tutorial on how to cook the ROM (like the one you posted in htc-mania about jailbreaking it; btw, very nice!). Thanks!
In spanish: Hola werty100, tengo un Lumia 1020 y vi que en el foro de xda no hay actividad. Me preguntaba si podrias cocinar una ROM redstone para este telefono? O por lo menos hacer un tuto al respecto sobre como hacer estas ROM (similar al que hiciste en htcmania, que por cierto muy bueno). Muchas gracias!!
WPinternals crash
WPinternals crahshed after boot phone to flash, any files don't write to phone.
Lumia 920 059Q805
Win7 x64
Could you make a 14342 rom for the 920? Would love to try that. Your tutorial is in spanish will try google translate in a minute but what does it say?
hi, my Lumia 920 too suck in nokia logo after flashing the mainos and data file using wpinternals
had to recover using the windows device recovery tool
Hi guys, finally I tweaked Lumia 920's mobile registry to make it look like a Lumia 950 and accomplished with the latest redstone update.
He is the procedure which I did and have posted in another thread.
Try it at your own risk.
PIN?
I successful installed your rom, but I need your PIN (like system password, not Pin from sim) to continue using my phone.
Could you give me, please?
Thanks in advance.
PD.: Nicely dog in a beautiful beach!
Hi Does this ROM have Glance working on it & Mass Storage mode..?
about ROM
I have downloaded and extracted the ROM which its link is given here. I extracted it and now I have three file with *.bin extentions. Now I don't know what should I do with them. there are no *.ffu to flash. please help me! it was so difficult to download a file with 6 GB size.

v3.0.8ABY 3.2GB Patched FW Download

Here is the official link from TCL's direct servers
Code:
https://g2slave-ap-south-01.tclcom.com/64c9b63f5a85fdd27b552eec614f884add8fdb67/32/625632
After downloading, right click -> Rename file and add the .zip extension to it. From there, you can open the rom in 7Zip
And unfortunately, as usual, it is not a full firmware, its a patch update.
Edit: not sure why this was moved. Its not a guide by any means, or news or discussion, its a ROM file, which I'd think would go in the section literally titled "TCL 10 Pro ROMs, Kernels, Recoveries, & Other Dev"
My phoneI is a display vision,can't get any update with ota,I used this packge rom to update via recovery,it advanced that rom used for T799B,my phone is T799H.
top170 said:
My phoneI is a display vision,can't get any update with ota,I used this packge rom to update via recovery,it advanced that rom used for T799B,my phone is T799H.
Click to expand...
Click to collapse
Unless I have a T799H without the update applied, I can't get the link for yours
Del. Double post..
KaptinBoxxi said:
Here is the official link from TCL's direct servers
Click to expand...
Click to collapse
Could you please explain how did you get this log? I want to do this for the European version of this phone..
sierte said:
Could you please explain how did you get this log? I want to do this for the European version of this phone..
Click to expand...
Click to collapse
adb logcat, then clicked the update button to download the file. If its already downloaded, you aren't getting it
KaptinBoxxi said:
adb logcat, then clicked the update button to download the file. If its already downloaded, you aren't getting it
Click to expand...
Click to collapse
I'll try. Thanks!
sierte said:
I'll try. Thanks!
Click to expand...
Click to collapse
These do not come up as full packages though, they're "part" files, which means they're fractions of files, only the parts that are different. Its similar to how something like a file patcher works. It just changes what it has to change
KaptinBoxxi said:
It just changes what it has to change
Click to expand...
Click to collapse
Seems there are no way to get full firmware.. if so
sierte said:
Seems there are no way to get full firmware.. if so
Click to expand...
Click to collapse
Basically neet a server crawler to just guess URL's (called a URL Fuzzer) to see if we can find them
TechX1991 said:
Aquí está el enlace oficial de los servidores directos de TCL
[código]https://g2slave-ap-south-01.tclcom.com/64c9b63f5a85fdd27b552eec614f884add8fdb67/32/625632[/código]
Después de la descarga, haga clic con el botón derecho en -> Renombrar archivo y agregue la extensión .zip. Desde allí, puedes abrir la rom en 7Zip
Y lamentablemente, como siempre, no es un firmware completo, es una actualización de parche.
Editar: no estoy seguro de por qué se movió esto. No es una guía de ninguna manera, ni noticias ni discusión, es un archivo ROM, que creo que iría en la sección titulada literalmente "TCL 10 Pro ROM , Kernels, Recoveries, & Other Dev"
Click to expand...
Click to collapse
Hello, how are you, I will try to tell this story as briefly as possible, a few days ago I bought a tcl 10 pro that comes by default with Android 10, and I tried by all means to update it to Android 11 but I couldn't. I would like you to help me, I am from Cuba and in my country many things that are normal in the rest of the world here are prohibited, please update your phone too
Help me please
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Manuel Alejandro Suárez P said:
Mod translation:
expand... Hello, how are you
Click to expand...
Click to collapse
Greetings. I'm fine, hope you are as well and welcome to XDA. As a friendly reminder, we ask all members to please post in English as stipulated by XDA Rule #4:
Spoiler: XDA Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Thank you for your cooperation, and have a pleasant day.
-Regards: Badger50
Manuel Alejandro Suárez P said:
Hello, how are you, I will try to tell this story as briefly as possible, a few days ago I bought a tcl 10 pro that comes by default with Android 10, and I tried by all means to update it to Android 11 but I couldn't. I would like you to help me, I am from Cuba and in my country many things that are normal in the rest of the world here are prohibited, please update your phone too
Help me please
View attachment 5923793
Click to expand...
Click to collapse
I no longer own one of these phones. Half the problem with TCL's is the updates aren't manually available from TCL. So unless someone else logcat's the update to get the oh so secret URL from tcl's servers, there's nothing I can do because I dno't have this device to try to help or the files I would have collected.
You can try JayTM's post, but not much more i can say
3.0.8AI7 TCL 10 Pro Android 11 Firmware OTA 0.9GB March 2022
Just got first OTA offers since August 2021. From what I can tell TCL is atleast sending out updates twice a year. In security settings I was able to perform Google Play system update and get March 1, 2022 security updates. Pulling the...
forum.xda-developers.com

Tectlast M40 Need help unbrick

Background:
I tried flashing Teclast M40Pro's firmware to the tablet in hope of it working on Teclast M40, but unfortunately bricked the tablet.
Status:
It's not totally bricked. Actually I am sure that the system booted because I can browse external storage of the tablet when I plug an USB cable to the computer. The problem is that the screen does not work (both display and touch). Now I am having problem flashing back to factory image.
What I have tried is holding power button of the tablet until it reboot and then hold the volume down button, but the tablet doesn't enter factory flash mode instead it boot normally.
More Info:
The bootloader is unlocked.
Need help:
1. How to enable developer mode without needing the screen so that I can command the tablet with adb?
2. How to boot to recovery with hardware button? This link's (https://droidrecovery.com/teclast-m40-recovery-mode/ ) method doesn't seem working. If it does work, please provide more details (Like how many seconds I need to wait and how many times I need to press the button to select the recovery mode).
3. Any other methods not mentioned above.
I finally work out the solution.
Generally the last method mentioned by siamese007 works.
siamese007 said:
1. Open SPD flash tool for M40 and load M40 firmware.
2. click Start downloading button.
3. hold vol down + power to turn off.
4. SPD flash tool will start flashing the firmware to M40.
Click to expand...
Click to collapse
However, it's more tortuous than it seems.
The first problem I met was failing to flash back M40 firmware with error flashing _BKF_NV_LTE.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I solved the problem by using ResearchDownload tool instead of UpgradeDownload tool with which I could skip flashing _BKF_NV_LTE in the settings menu.
The flashing succeeded and the system booted, but here came the second problem. The system could not recognize the IMEI and what even worse was the system would crash and reboot within a few minutes. This was reasonable as I skiped flashing _BKF_NV_LTE.
The problem was solved by flashing _BKF_NV_LTE manually with fastboot.
Code:
fastboot flash l_fixnv1 sharkl5pro_pubcp_customer_nvitem.bin
@AnKHqz, where did you get a copy of Teclast M40 Pro firmware? Mind sharing it?
kchung said:
where did you get a copy of Teclast M40 Pro firmware? Mind sharing it?
Click to expand...
Click to collapse
M40 Pro(M1A1)_Android11.0_EEA
M40Pro(M1A1)_Android11.0_ROW
AnKHqz said:
Finalmente encontrei a solução.
Geralmente, o último método mencionado por siamese007 funciona.
No entanto, é mais tortuoso do que parece.
O primeiro problema que encontrei foi não conseguir fazer o flashback do firmware M40 com o erro de flashing _BKF_NV_LTE.
View attachment 5400005
Resolvi o problema usando a ferramenta ResearchDownload em vez da ferramenta UpgradeDownload, com a qual pulei a exibição de _BKF_NV_LTE no menu de configurações.
View attachment 5400009
O flashing foi bem-sucedido e o sistema inicializou, mas aí veio o segundo problema. O sistema não conseguia reconhecer o IMEI e o que é ainda pior é que o sistema travava e reiniciava em poucos minutos. Isso foi razoável, já que pulei o piscar de _BKF_NV_LTE.
O problema foi resolvido atualizando _BKF_NV_LTE manualmente com o fastboot.
[CÓDIGO] fastboot flash l_fixnv1 sharkl5pro_pubcp_customer_nvitem.bin [/ CODE]
Click to expand...
Click to collapse
Eu tenho esse problema BKF_NV_LTE
Eu não consegui resolver isso. Precisa o bootloader desbloqueado? Ou você tem um link para eu tentar. Você me ajudaria?
1. To skip the _BKF_NV_LTE step that failed, you need to use the SPD Research Tool. Launch the tool, select the firmware and uncheck NV_LTE in the settings menu, then you should flash the fireware without error. The tool can be downloaded from https://spdflashtool.com/research-tool/spd-research-tool-r21-0-0001.
2. To make the system fully functional, you need to manually flash the file skipped in step 1. This require the bootloader to be unlocked. The unlocking method is available on https://forum.xda-developers.com/t/teclast-m40-how-to-unlock-bootloader.4185363/.
AnKHqz said:
The flashing succeeded and the system booted, but here came the second problem. The system could not recognize the IMEI and what even worse was the system would crash and reboot within a few minutes. This was reasonable as I skiped flashing _BKF_NV_LTE.
The problem was solved by flashing _BKF_NV_LTE manually with fastboot.
Code:
fastboot flash l_fixnv1 sharkl5pro_pubcp_customer_nvitem.bin
Click to expand...
Click to collapse
Hi!I
I did the same stupid thing with the m40 pro firmware...
The first step to fix it worked, thanks!! But for the second problem, I cannot use the fastboot since my bootloader is blocked and I don't know how to unlock it, I read the guides but I don't have access to linux.
I just want the tablet to work again. Could you help me?
Thank you so much!
fernando823 said:
Hi!I
I did the same stupid thing with the m40 pro firmware...
The first step to fix it worked, thanks!! But for the second problem, I cannot use the fastboot since my bootloader is blocked and I don't know how to unlock it, I read the guides but I don't have access to linux.
I just want the tablet to work again. Could you help me?
Thank you so much!
Click to expand...
Click to collapse
It's been a while since I unlocked my bootloader, so I don't remember the details of how to unlock the bootloader, but I would suggest trying a Linux VM or WSL.
There is another method by Dtechflix in youtube. Download SPD_Research_Tool and run "ResearchDownload.exe".
Load the pac file (M40) -> click option button (2nd from left) -> Click "Backup" -> untick "NV_LTE" and "ProdNV" at the bottom -> Click "OK" -> Click "Update icon" (3rd from left) and proceed with the remaining steps as normal for flashing.

ROOT XT2095-1 MOTO E7 SUCCESS

i managed to unlock the xt2095-1 bootloader but at the same time i corrupted imei
I need your help so I can continue my work
MY TELEGRAM: Mod edit: TG link removed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 5650923
Como você Conseguiu desbloquear o bootloader do moto e7? poderia me ajudar?
Mod translation: How did you manage to unlock moto e7 bootloader? Would you help me?
Moto E7 Malta said:
Como você Conseguiu desbloquear o bootloader do moto e7? poderia me ajudar?
Mod translation: How did you manage to unlock moto e7 bootloader? Would you help me?
Click to expand...
Click to collapse
In my case, I was able to unlock it by writing the lolinet stock rom (retbr latest patch released.) with that, I used the mtkclient unlock method normally. to my surprise, after restarting the device, I saw the message that the bootloader was unlocked
~~and sorry for my bad english.~~
e eu queria muito desbloquear o meu, poderia me explicar passo a passo?
Maizon_original said:
i managed to unlock the xt2095-1 bootloader but at the same time i corrupted imei
I need your help so I can continue my work
MY TELEGRAM: Mod edit: TG link removed.
View attachment 5650921View attachment 5650923
Click to expand...
Click to collapse
Maizon, how did you manage to install magisk? on my device it always had bootloops after writing the kernel.
Moto E7 Malta said:
e eu queria muito desbloquear o meu, poderia me explicar passo a passo?
Click to expand...
Click to collapse
Unfortunately I couldn't understand if my method works. Also, with the IMEI lost, you no longer have access to the cellular network.
Also, please only write English in the forums. This makes mods very happy.
What did I do:
- Using SP Flash Tool, I rewrote the stock ROM.
- Then I used mtkclient with the command:
Bash:
mtk da seccfg unlock
- Note that I use linux. The way you invoke mtk is different by platform.
- On reboot, if you get the message (Orange State), you've nailed it.
oi eu tenho esse celular e vi que o cpu dele é 64 bits so que a rom stock é 32bits. A minha duvida é se é possível instalar uma rom 64bits nele pq vi que existe várias stocktoms dele em 64 bits mais quando flashada não funciona
gffhgf said:
oi eu tenho esse celular e vi que o cpu dele é 64 bits so que a rom stock é 32bits. A minha duvida é se é possível instalar uma rom 64bits nele pq vi que existe várias stocktoms dele em 64 bits mais quando flashada não funciona
Click to expand...
Click to collapse
simple hint: speak english in xda threads. Mods will be happy.
And check if your kernel is 64-bit. Because, in my decide, ships a 64-bit ROM.
In fact, it is possible to write the corresponding A/B ROM via fastbootd.
Aisu_MaltaClub said:
simple hint: speak english in xda threads. Mods will be happy.
And check if your kernel is 64-bit. Because, in my decide, ships a 64-bit ROM.
In fact, it is possible to write the corresponding A/B ROM via fastbootd.
Click to expand...
Click to collapse
I'm new here, I need help to repair imei of my moto e7, any solution found
Aisu_MaltaClub said:
In my case, I was able to unlock it by writing the lolinet stock rom (retbr latest patch released.) with that, I used the mtkclient unlock method normally. to my surprise, after restarting the device, I saw the message that the bootloader was unlocked
~~and sorry for my bad english.~~
Click to expand...
Click to collapse
Unfortunately the mtk client did not help me, I try to see if I can both repair imei and unlock the bootloader with hydra tool
Leonismm said:
Unfortunately the mtk client did not help me, I try to see if I can both repair imei and unlock the bootloader with hydra tool
Click to expand...
Click to collapse
a question: before using mtkclient, have you tried to rewrite the stock ROM?
Ah, to fix IMEI, you can try with ModemMeta Tool...
Aisu_MaltaClub said:
a question: before using mtkclient, have you tried to rewrite the stock ROM?
Ah, to fix IMEI, you can try with ModemMeta Tool...
Click to expand...
Click to collapse
yes of course I overwrote it, but by accident I forgot to uncheck the preolader box
Aisu_MaltaClub said:
a question: before using mtkclient, have you tried to rewrite the stock ROM?
Ah, to fix IMEI, you can try with ModemMeta Tool...
Click to expand...
Click to collapse
I'll try in a while I'll report
Leonismm said:
I'll try in a while I'll report
Click to expand...
Click to collapse
brother the rom I have is 32 bits, in the mtk client I had problems with the handshake, how unfortunate
chow to unlock the bootloader Moto E7 64gb?
sorry to resurrect this topic but if anyone with workin imei could backup their nvdata and nvram, all of us could restore our imei numbers
dvijetrecine said:
sorry to resurrect this topic but if anyone with workin imei could backup their nvdata and nvram, all of us could restore our imei numbers
Click to expand...
Click to collapse
Tell me step by step how to do it and I'll give you my backup

Categories

Resources