SGH-i777 wrong kernel - AT&T Samsung Galaxy S II SGH-I777

Hi there
-I'm on AT&T using a SGH-i777
Right now, the Android version is 2.3.4
Kernel Version is 2.6.35.7
Not sure if all of that stuff is relevant, but hopefully it helps.
I'm very new to flashing, rooting, and all that good stuff in general, but today I attempted to follow a guide in attempt to put CWM on my phone, and then I would use CWM to flash Cyanogenmod 9 on it next. Being the complete noob that I am, I only realized too late that the Kernel provided in the guide was for the GT-i9100, and not the SGH-i777. Right now, the phone will boot up into Android, but displays the GT-i9100 and a yellow warning sign at the boot loader before launching into android. So far, I've not noticed any adverse side effects due to mis-flash, other than it being, you know, the wrong kernel. I've rebooted into CWM, and so far I believe that works, but I'm honestly not sure where to go from here.
The guide I followed was: *Can't post links as this is my first post, but it was on the cyanogenmod wiki, titled as, "Samsung Galaxy S II (AT&T): Full Update Guide"*
The kernel I installed was named: "codeworkx's Kernel with the ClockworkMod Recovery 5.0.2.3"
So essentially what I'm wondering here, is where should I go from here? I was thinking I could flash a new kernel on my phone, but I think I only got lucky here and didn't brick it, so I'm hesitant to follow random guides I get from Googling without someone with experience thumbs-upping it for me. I'd still like to put Cyanogen on my phone, as the official ROM(Right terminology?) that was pushed from AT&T sucks and lags while opening messaging and the like, and unless anyone would be willing to recommend another, better ROM, then I'll probably go with it once I get this worked out.
Thanks in advanced

Ibemi said:
Hi there
-I'm on AT&T using a SGH-i777
Right now, the Android version is 2.3.4
Kernel Version is 2.6.35.7
Not sure if all of that stuff is relevant, but hopefully it helps.
I'm very new to flashing, rooting, and all that good stuff in general, but today I attempted to follow a guide in attempt to put CWM on my phone, and then I would use CWM to flash Cyanogenmod 9 on it next. Being the complete noob that I am, I only realized too late that the Kernel provided in the guide was for the GT-i9100, and not the SGH-i777. Right now, the phone will boot up into Android, but displays the GT-i9100 and a yellow warning sign at the boot loader before launching into android. So far, I've not noticed any adverse side effects due to mis-flash, other than it being, you know, the wrong kernel. I've rebooted into CWM, and so far I believe that works, but I'm honestly not sure where to go from here.
The guide I followed was: *Can't post links as this is my first post, but it was on the cyanogenmod wiki, titled as, "Samsung Galaxy S II (AT&T): Full Update Guide"*
The kernel I installed was named: "codeworkx's Kernel with the ClockworkMod Recovery 5.0.2.3"
So essentially what I'm wondering here, is where should I go from here? I was thinking I could flash a new kernel on my phone, but I think I only got lucky here and didn't brick it, so I'm hesitant to follow random guides I get from Googling without someone with experience thumbs-upping it for me. I'd still like to put Cyanogen on my phone, as the official ROM(Right terminology?) that was pushed from AT&T sucks and lags while opening messaging and the like, and unless anyone would be willing to recommend another, better ROM, then I'll probably go with it once I get this worked out.
Thanks in advanced
Click to expand...
Click to collapse
yes your lucky u didnt brick as far as i know that would usually do the trick....the only thing i can think of is starting from scratch. go into the development forums for our phone and there is a simple process to restore to stock and start over but someone here might know a little more but thats what i would do honestly

What makes you think it was a GT-I9100 kernel? From the name, I'm pretty sure what you flashed is the codeworkx CWM kernel for the I777. The boot screen that says GT-I9100 and has the yellow warning triangle would appear any time you flash a custom kernel using Odin or Heimdall. If you had installed a kernel which is actually for the I9100, you would not be able to use all of your capacitive buttons. You should be able to flash the firmware of your choice using recovery from your current setup.

Oh man, do I feel dumb or what?
Thanks for the quick help, I really wasn't lying when I said I was a noob at this!

Ibemi said:
Oh man, do I feel dumb or what?
Thanks for the quick help, I really wasn't lying when I said I was a noob at this!
Click to expand...
Click to collapse
Everyone is a noob at some point. You'll learn!! Don't let yourself get discouraged.
Go to the main SGH-I777 forum and check out the stickied threads to get a good baseline of knowledge.
Sent from my smooth as butter SGH-I777.

You can remove the gt-i9100 and yellow triangle with triangle away found in forums ( would post link but not sure where it is all you have to do is search) but be warned this can have adverse effects I never experienced any but that doesn't mean you wont .
Sent from my GT-I9100 using xda app-developers app

bocephus007 said:
You can remove the gt-i9100 and yellow triangle with triangle away found in forums ( would post link but not sure where it is all you have to do is search) but be warned this can have adverse effects I never experienced any but that doesn't mean you wont .
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Only on ics (rooted)
Sent from my SGH-I777 using xda app-developers app

u trip the counter! on GB u need a jig to reset that counter for ICS theres an app for that.
anyway since u already got CWM then u can start flashing ROMs & afaik CM9 is still in nightlies or not as stable yet for our device. u can try other ICS ROMs which are more stable, like SHOstock or Semi, its your choice.

lvlark02 said:
u trip the counter! on GB u need a jig to reset that counter for ICS theres an app for that.
anyway since u already got CWM then u can start flashing ROMs & afaik CM9 is still in nightlies or not as stable yet for our device. u can try other ICS ROMs which are more stable, like SHOstock or Semi, its your choice.
Click to expand...
Click to collapse
Cm9 is plenty stable
Sent from Team Pirate!

Nick281051 said:
Cm9 is plenty stable
Sent from Team Pirate!
Click to expand...
Click to collapse
eventho it looks & feel stable as long as there no stable build out yet officially i wouldnt consider it "stable" hence it still in nightlies. is there even a RC yet?

lvlark02 said:
eventho it looks & feel stable as long as there no stable build out yet officially i wouldnt consider it "stable" hence it still in nightlies. is there even a RC yet?
Click to expand...
Click to collapse
Learn before you speak. There are two of them

122ninjas said:
Learn before you speak. There are two of them
Click to expand...
Click to collapse
umm its either CM's website outdated or u have inside scoop but i dnt see any official release yet, prove me wrong if u may. if yer talking bout RC1&RC2 its not specific for our devices but yes its for GS2 in general.

lvlark02 said:
umm its either CM's website outdated or u have inside scoop but i dnt see any official release yet, prove me wrong if u may. if yer talking bout RC1&RC2 its not specific for our devices but yes its for GS2 in general.
Click to expand...
Click to collapse
http://download.cyanogenmod.com/?device=i777&type=RC

122ninjas said:
http://download.cyanogenmod.com/?device=i777&type=RC
Click to expand...
Click to collapse
wow that was just confusing, all this time there's two entries for at&t s2 & ive been looking at the wrong one which is this http://download.cyanogenmod.com/?device=galaxys2att&type=RC
thanks for pointing me to the right one

lvlark02 said:
wow that was just confusing, all this time there's two entries for at&t s2 & ive been looking at the wrong one which is this http://download.cyanogenmod.com/?device=galaxys2att&type=RC
thanks for pointing me to the right one
Click to expand...
Click to collapse
They changed the name to I777 because there are two at& t galaxy s2's (one being the skyrocket) that's why it only shows cm7
Sent from Team Pirate!

Nick281051 said:
They changed the name to I777 because there are two at& t galaxy s2's (one being the skyrocket) that's why it only shows cm7
Sent from Team Pirate!
Click to expand...
Click to collapse
that figures, they coulda made it more clear that the other is for that damn skyrocket or even have the model number in it. good thing i hold out on CM7 coz i wouldve flashed that wrong one & potentially brick my device. thanks for the clarification.
to the OP- sorry i kinda got out of topic here

lvlark02 said:
that figures, they coulda made it more clear that the other is for that damn skyrocket or even have the model number in it. good thing i hold out on CM7 coz i wouldve flashed that wrong one & potentially brick my device. thanks for the clarification.
Click to expand...
Click to collapse
Yeah kind of weird
Sent from my SGH-I777

Related

[Q] [Q&A] About CM9 and restoring backup from CWM!!

Hey folks,
I just bought the white international SGS II and i'm loving it!
I previously had an Infuse 4g, so I am pretty experienced with flashing/backing up/ restoring...but I have questions/concerns regarding the I9100.
I am about to try out the CM9 Unstable, so I backed my current stock ROM up using CWM Manager 3.0 (I am on CF-Root 5.0) onto my Internal SD, as I do not have an external SD card.
Now, I have had bad experiences with CM7 with Infuse and ended up not being able to restore due to many problems like MD5 mismatch, different CWM version, and problems while restoring ( I think it said something like devblock??)
So I'm pretty worried about not being able to restore back to the backup i just made.
So correct me if I'm wrong folks,
1) Go into CWM, flash CM9(once? twice?), Gapps, Faceunlock,
2) Data wipe/factory reset
3) Reboot
and should I choose to restore back to the stock Rom backup,
just go into CM9's recovery and restore..?
will this method give me problems restoring? will I have different versions of CWM recovery from the one I have currently? Is there any way to check if my back up was made properly?
Thanks a lot folks! Appreciate it!
Edit: "Make sure you're already running ICS bootloader (if not, go to SamMobiles and flash XXKP2 bootloader)". Is this necessary? Cus I have seen some folks say that they've not and was fine installing CM9.
First the procedure:
1. Wipe
2. Install CyanogenMod 9
3. Reboot
4. Install CyanogenMod again
5. Install gapps and face-unlock
Worked for me every time.
Your backups should work unless there were errors while creating them.
If you want some more safety, you can create a new backup after flashing the Siyah-kernel. The latest version uses the same version of ClockWorkMod as CyanogenMod 9.
Whether you need to flash the bootloader or not, depends on whether you already have it or not. I'm running galnet-MIUI and already had the bootloader installed. I don't know how to tell if you have it.
Sent from my GT-I9100 using XDA App
Ok...
I did further research and found out that Nandroid backup backs up everything EXCEPT the kernel.
I'm pretty sure that CM has its own kernel...but will it be CWM 5.0.2.7(the one i made backup in.)?
If it's not, the correct steps for me to restore my nandroid back up is to
1)boot into download mode from CM9,
2) put the cf-root kernel that i used in the ODIN PDA, flash,
3) turn off phone, reboot into CWM, then restore my nandroid back up right??
Can anyone please confirm this method??
I only have this phone and I cannot risk soft-bricking or hard-bricking this beautiful device.
Thanks in advance!
Also, i made a back up in blue recovery of CWM 5.0.2.7..does that matter?
TheSniperFan said:
First the procedure:
1. Wipe
2. Install CyanogenMod 9
3. Reboot
4. Install CyanogenMod again
5. Install gapps and face-unlock
Worked for me every time.
Your backups should work unless there were errors while creating them.
If you want some more safety, you can create a new backup after flashing the Siyah-kernel. The latest version uses the same version of ClockWorkMod as CyanogenMod 9.
Whether you need to flash the bootloader or not, depends on whether you already have it or not. I'm running galnet-MIUI and already had the bootloader installed. I don't know how to tell if you have it.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
thanks for the reply,
so I must have the ICS bootloaders in order for CM9 to work?
ooo siyah kernel method... that makes it easier! haha thanks so much!
I will proceed to do that!
btw, how is CM9 working for you?
do you think you'll be able to use it as a daily driver now that NITZ is gone??
1. Afaik cwm backs the kernel up and restores it too. (afaik = 99.9% sure, in this case)
2. CyanogenMod ships with its own kernel.
3. The kernel is not cwm. ClockWorkMod is just the recovery that is integrated into the kernel. CyanogenMod 9 has cwm-recovery 5.5 (Siyah too btw)
4. You don't need to use download-mode to restore.
Sent from my GT-I9100 using XDA App
You must have ICS-bootleggers. He did not say that for fun xD.
Is it suitable as daily driver for me?
Nope.avi
Why?
Accelerometer is unresponsive, so it takes forever to flip your screen.
Battery drainage is horrible.
Camera isn't working properly.
And the biggest no-go for me:
The device gets way to hot when using it.
Sent from my GT-I9100 using XDA App
TheSniperFan said:
You must have ICS-bootleggers. He did not say that for fun xD.
Is it suitable as daily driver for me?
Nope.avi
Why?
Accelerometer is unresponsive, so it takes forever to flip your screen.
Battery drainage is horrible.
Camera isn't working properly.
And the biggest no-go for me:
The device gets way to hot when using it.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
alright,
thanks for the information!
I'll flash the Siyah kernel
Btw,
Flashing CM9 Zip does not flash the ICS bootloader right?
so then if I want to restore to my GB 2.3.5, would I need to flash GB bootloaders before restoring via Odin??
If the zip would flash the loaders, he wouldn't have mentioned it.
They're backwards-compatible.
Sent from my GT-I9100 using XDA App
If you need to make a post in the Q&A forums about flashing CM9, then you are definitely not the sort of person who should be flashing it. It is in very much a beta stage and there is a very high possibility it will **** your phone up even if you have done nothing wrong. If that happens you need to be the sort of person with enough experience to solve the problem by themselves. If you are asking questions before you've even flashed it then really, it's not for you. Use CM7, at the moment it's better than CM9 in every single way.
postfatal said:
If you need to make a post in the Q&A forums about flashing CM9, then you are definitely not the sort of person who should be flashing it. It is in very much a beta stage and there is a very high possibility it will **** your phone up even if you have done nothing wrong. If that happens you need to be the sort of person with enough experience to solve the problem by themselves. If you are asking questions before you've even flashed it then really, it's not for you. Use CM7, at the moment it's better than CM9 in every single way.
Click to expand...
Click to collapse
It's not thaaaaaaaaat bad. I mean, he won't be able to brick the device through cwm.
If he doesn't ask, he will never learn and it's always better to ask twice than to break something.
Sent from my GT-I9100 using XDA App
Thank you sniper =) really appreciate the support.
Ive been flashing and restoring before with my infuse 4g. Just sometimes ran into problems with restoring with diff CWM versions and stuff. This phone is very precious(expensive) so i thought i would learn it for sure before i attempted anything.. thanks anyways for sharing your opinion!
Sent from my GT-I9100 using XDA App
TheSniperFan said:
It's not thaaaaaaaaat bad. I mean, he won't be able to brick the device through cwm.
If he doesn't ask, he will never learn and it's always better to ask twice than to break something.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I couldnt agree more... i think people here on XDA need to stop trying to be all hot **** saying Oh you asked a question your a noob... in reality most ppl here want to ask the same question but dont because afraid of getting *****ed out... and when someone else asks... try to be badass and put the person down...
Iv used a Galaxy S and a Moto Atrix and now a S2... flashed the life out of each phone along with all kinds of stuff and mods... yet i would have wanted to ask these same questions before flashing hence googled and found this thread... So thanks to those that replied as well... i was about to flash ics till i read this and guess imma hold back now even more...
But again i think people here need to calm the hell down... a person asks a question in the thread and you call them a 'noob' and what not... a person asks a question in the Q&A section and again you tell them off... stop being such anal retentive trolls...
DrunkFuX666 said:
I couldnt agree more... i think people here on XDA need to stop trying to be all hot **** saying Oh you asked a question your a noob... in reality most ppl here want to ask the same question but dont because afraid of getting *****ed out... and when someone else asks... try to be badass and put the person down...
Iv used a Galaxy S and a Moto Atrix and now a S2... flashed the life out of each phone along with all kinds of stuff and mods... yet i would have wanted to ask these same questions before flashing hence googled and found this thread... So thanks to those that replied as well... i was about to flash ics till i read this and guess imma hold back now even more...
But again i think people here need to calm the hell down... a person asks a question in the thread and you call them a 'noob' and what not... a person asks a question in the Q&A section and again you tell them off... stop being such anal retentive trolls...
Click to expand...
Click to collapse
Most people should not flame some one as long as they show they have at least tried to look for an answer first. Yes we were all new at one time but we all learned.
Like you said you Googled and found your answer. Not that hard.
Think it's bad now. Should have seen it a few years ago. Lol clutter up the threads with questions that the answers were found with a search. You got warned. Do it twice and you went on vacation for a few days to learn how to search. So the next time you think people are being too hard. Remember it is not as hlbad as it was.
When I search for the answer, I ended up here.
are these considered ICS bootloaders? If not, when would you flash them, because they are completely unmentioned in any of the instructions or FAQs
CWM flashable Modems:
XXKP8 Modem: http://www.multiupload.com/64J2P1MZL6
XXKP4 Modem: http://www.multiupload.com/NYUYFOT1ST

[Q] Check For Update issue after root

hello all,
i have followed entropy512's thread here to get my at&t samsung galaxy s2 rooted with stock settings...i then wanted clockworkmod recovery so i went to this and followed directions to get everything installed...everything was ok and working until a few weeks ago when the 'Check Update' option under Setting stopped working...
basically what happens is when i goto Settings-> Software Update->Check for updates->Hit OK (Check the AT&T server for new software update?) a dialog comes up that says 'Checking for software updates...' and nothing happens...i have left the phone over night with device management app checking for software updates... when this used to work, it took less than 1 minute to check...
finally, the only way for me to stop this is to go and force stop Device Manager under Applications->All, so before i restore the phone to factory, i was wondering if anyone knows what might be the issue here?
Thanks,
FI
fastindy said:
hello all,
i have followed entropy512's thread here to get my at&t samsung galaxy s2 rooted with stock settings...i then wanted clockworkmod recovery so i went to this and followed directions to get everything installed...everything was ok and working until a few weeks ago when the 'Check Update' option under Setting stopped working...
basically what happens is when i goto Settings-> Software Update->Check for updates->Hit OK (Check the AT&T server for new software update?) a dialog comes up that says 'Checking for software updates...' and nothing happens...i have left the phone over night with device management app checking for software updates... when this used to work, it took less than 1 minute to check...
finally, the only way for me to stop this is to go and force stop Device Manager under Applications->All, so before i restore the phone to factory, i was wondering if anyone knows what might be the issue here?
Thanks,
FI
Click to expand...
Click to collapse
The issue is that you're rooted, I wish people would search more
Sent from my SGH-I777 using Tapatalk 2
Nick281051 said:
The issue is that you're rooted, I wish people would search more
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
umm this option was working until a few weeks ago and it randomly stopped so im not sure what rooting has to do with it...furthermore, i did search using various permutations of words around the issue at hand, and i did not find threads that addressed this issue...
fastindy said:
umm this option was working until a few weeks ago and it randomly stopped so im not sure what rooting has to do with it...furthermore, i did search using various permutations of words around the issue at hand, and i did not find threads that addressed this issue...
Click to expand...
Click to collapse
Being rooted you shouldn't even worry about updates, if you had actually searched you would have seen that
Sent from my SGH-I777 using Tapatalk 2
fastindy said:
umm this option was working until a few weeks ago and it randomly stopped so im not sure what rooting has to do with it...furthermore, i did search using various permutations of words around the issue at hand, and i did not find threads that addressed this issue...
Click to expand...
Click to collapse
OTA updates require factory recovery. I'm a bit hazy on the details but I believe CWM, in short, replaces that.
It might also be because you either turned off/uninstalled or inadvertently removed factory bloatware.
BROKKANIC said:
OTA updates require factory recovery. I'm a bit hazy on the details but I believe CWM, in short, replaces that.
It might also be because you either turned off/uninstalled or inadvertently removed factory bloatware.
Click to expand...
Click to collapse
This. Amongst other things. If u insist on trying to eventually upgrade to whatever crap gets pushed out to us yer best bet is to do a full wipe to completely stock firmware.
Nick281051 said:
Being rooted you shouldn't even worry about updates, if you had actually searched you would have seen that
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
once again, the issue is not weather i should worry about updates or not nor did i search for if i should worry about updates...this option was working and something happened that caused it to stop working...and my searches i did was around getting device management to connect to the dm server (which is where the 'Checking for update' got stuck)
BROKKANIC said:
OTA updates require factory recovery. I'm a bit hazy on the details but I believe CWM, in short, replaces that.
It might also be because you either turned off/uninstalled or inadvertently removed factory bloatware.
Click to expand...
Click to collapse
Phalanx7621 said:
This. Amongst other things. If u insist on trying to eventually upgrade to whatever crap gets pushed out to us yer best bet is to do a full wipe to completely stock firmware.
Click to expand...
Click to collapse
both of you seem to be spot on...i didnt realize that removing bloatware which was marked as 'ok to remove' on the document of things to remove safely could have been the issue...initially i had frozen them using titanium...neway i restored the phone using the CWM backup i had and the option started working like expected...thanks for the input
I'm curious...why do you want that option to work?
mattdm said:
I'm curious...why do you want that option to work?
Click to expand...
Click to collapse
so that i can get ICS when AT&T releases the official one... i know there are leaked versions out there, but i dont mind the wait, especially, from the research, i have found people having issues with various features
fastindy said:
so that i can get ICS when AT&T releases the official one... i know there are leaked versions out there, but i dont mind the wait, especially, from the research, i have found people having issues with various features
Click to expand...
Click to collapse
Do you recall all the issues with UCKK6 Gingerbread? That was an AT&T release. The devs had to tear it apart to debug and try to fix it. Any build will have bugs in it. But generally, custom firmwares will have fewer bugs than AT&T firmware.
mattdm said:
Do you recall all the issues with UCKK6 Gingerbread? That was an AT&T release. The devs had to tear it apart to debug and try to fix it. Any build will have bugs in it. But generally, custom firmwares will have fewer bugs than AT&T firmware.
Click to expand...
Click to collapse
unfortunately, i joined the android bandwagon only when i got my samsung galaxy s2, which was a little late in the game, so i have no clue on all the start up issues that people experienced with Gingerbread release...
for now ill need to stick with stock/At&T firmware however ill make the switch to custom firmwares when i stop being lazy and create a USB jig for myself...
fastindy said:
for now ill need to stick with stock/At&T firmware however ill make the switch to custom firmwares when i stop being lazy and create a USB jig for myself...
Click to expand...
Click to collapse
Why would you need a jig? You're already rooted with CWM.
fastindy said:
so that i can get ICS when AT&T releases the official one... i know there are leaked versions out there, but i dont mind the wait, especially, from the research, i have found people having issues with various features
Click to expand...
Click to collapse
I've been running AOKP by Task for a while and have never had a serious issue. The one's I have had were self inflicted and with some reading were quite easy to fix.
BROKKANIC said:
Why would you need a jig? You're already rooted with CWM.
Click to expand...
Click to collapse
if my research that i conducted a while ago is right, then basically samsung has implemented a flash counter which increments each time you flash a custom, non-stock rom...it might also be applied to non-stock kernels/firmwares as well (im not too sure)...so to prevent the flash counter from ever incrementing, ill need to put the phone in download mode using the jig and continue from there...
grubby0 said:
I've been running AOKP by Task for a while and have never had a serious issue. The one's I have had were self inflicted and with some reading were quite easy to fix.
Click to expand...
Click to collapse
alright thanks, ill check it out
fastindy said:
if my research that i conducted a while ago is right, then basically samsung has implemented a flash counter which increments each time you flash a custom, non-stock rom...it might also be applied to non-stock kernels/firmwares as well (im not too sure)...so to prevent the flash counter from ever incrementing, ill need to put the phone in download mode using the jig and continue from there...
alright thanks, ill check it out
Click to expand...
Click to collapse
This is wrong. It is only incremented when you use ODIN to flash nonstock items. CWM has no bearing on flash counters.
Sent from my HTC One X using Tapatalk 2
fastindy said:
if my research that i conducted a while ago is right, then basically samsung has implemented a flash counter which increments each time you flash a custom, non-stock rom...it might also be applied to non-stock kernels/firmwares as well (im not too sure)...so to prevent the flash counter from ever incrementing, ill need to put the phone in download mode using the jig and continue from there...
Click to expand...
Click to collapse
You have some bad information...but I have some good news for you.
The flash counter only counts the number of times you've flashed a custom kernel in download mode via Odin. Using CWM to flash anything can't touch the flash counter. Same goes for Mobile Odin. I've been rooted and flashing for months, I don't have a jig, and my counter is still at zero.
EDIT: Ninja'd by a pirate!
fastindy said:
unfortunately, i joined the android bandwagon only when i got my samsung galaxy s2, which was a little late in the game, so i have no clue on all the start up issues that people experienced with Gingerbread release...
for now ill need to stick with stock/At&T firmware however ill make the switch to custom firmwares when i stop being lazy and create a USB jig for myself...
Click to expand...
Click to collapse
Any GB issues only surfaced if you updated to 2.3.6. 2.3.4 for a "stock" firmware was pretty awesome. I'm on the latest ICS leak from ATT (LD4) and aside from the emmc bug (I'm using a safe kernel so I don't have it) IMHO its more complete then CM9 was. I stopped using CM9 at the end of May and don't miss it at all now.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
alright well i learnt something new today...and now that i have the freedom to flash like a mad man without worrying about flash counter (via CWM), i will surely checkout some of the leaked versions of ICS that you guys are using, and see which one works best for me...thanks for all the new info
fastindy said:
alright well i learnt something new today...and now that i have the freedom to flash like a mad man without worrying about flash counter (via CWM), i will surely checkout some of the leaked versions of ICS that you guys are using, and see which one works best for me...thanks for all the new info
Click to expand...
Click to collapse
I reccomend roms that use i9100 bases as they are usually better, roms like phonebricker, and shostock2 are good, my favorite touchwiz based rom though is serendipity 9. But thats my experiences so try them for yourself (i use aokp as my daily though.)
Sent from my SGH-I777 using Tapatalk 2
Remove Triangle and Reset Counter
http://shetalksandroid.blogspot.com/2012/03/how-to-reset-sgs2-flash-counter-and.html
Please read the above link.
I just did it last night and really works!
Time to hit the Thanks button
EDIT:
This not only makes the meter go back to zero, but also removes the yellow triangle, without the JIG.
Thanks to Chainfire, its free! Just read the above link. (And please "Search" more

I give up - Seeking Help

Here is my issue. I have SGH-i777 - Plugged it into Kies - Updated to ICS - Found a Guide (not on here - stupid me) to Root my SGH-i777 on ICS.
It worked, but I noticed the GT-i9100 under the Galaxy S II logo with a yellow triangle at the bottom -however, the phone worked great until I stupidly used ROM Manager - Bricked my phone. I found a guide on here, but again...stupid me...didnt realize I was following a guide for the GT-i9100 resulting me in solving my issue and getting the phone to finally turn back...but only to think it was fully a GT-i9100. The only two keys on the bottom that worked, were my home button and the menu button on the bottom left. Nothing else.
I have searched and searched for this, and found a Post on here that advised me to Download the Odin3 I777 One Click No BL. Once I finally got my phone into download mode (which was a chore in itself) I finally was able to show SGH-i777 in My Kernel Version when I go into About Phone. HOWEVER - I still get the GT-i9100 under the logo during boot, my Auto Play window that pops up on my computer when phone gets plugged in via USB shows GT-i9100 and Kies tells me it can not update the device but at least it registers as SGH-i777
My questions are, how to get rid of whatever it is that shows up GT-i9100...so I guess how to start ALL OVER. And second, is how to properly get ICS or maybe even Jelly Bean - and if there is a root for it. What the proper steps are, so I dont end up in this mess again. Thanks in advance guys!
Triangle away from the appstore works to get rid of the triangle and such. You can also flash most if not all the roms here they are all ics or jb anymore I think
Sent from my SGH-I777 using xda premium
Hey buddy,
Looks like you took the long way haha. Alright, first of all we need to check if you are already rooted. Not sure if the one click no bl for you talk about was rooted or not.
If you determine you are rooted, you should be able to go into the android development forum, and flash any rom (be sure to follow instructions in OP).
If not, post back your android version, kernel info, and we'll go from there.
Ps, triangle away removes the triangle and gti9100 logo from startup, but you must be rooted and on ics (not sure if it works on jb, def no for gingerbread)
Sent from my SGH-I777 using xda app-developers app
thanitos said:
Triangle away from the appstore works to get rid of the triangle and such. You can also flash most if not all the roms here they are all ics or jb anymore I think
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
TriangleAway only works on ICS.
OP thanks for trying everything yourself first and learning from your mistakes before posting! You have no idea how many people don't put forth the effort you have done already. So as a reward, I'll provide you with nice easy links to get you back up and running again! :highfive:
This guide will help you get back to completely stock, unrooted Gingerbread (as if you just bought the phone). You can skip only the last step of that guide since you're actually keeping your phone. Then you can use this guide to start flashing custom ROMs without getting that triangle thing. I highly recommend reading both guides very thoroughly and multiple times so you understand everything. After doing so, feel free to ask questions about anything you don't understand from your reading and I'll do my best to help you out. And after you fully understand everything you are about to do, here's a list of ROMs, kernels, etc for your choice of flashing (most custom ROMs for this phone versions of ICS).
karate104 said:
TriangleAway only works on ICS.
OP thanks for trying everything yourself first and learning from your mistakes before posting! You have no idea how many people don't put forth the effort you have done already. So as a reward, I'll provide you with nice easy links to get you back up and running again! :highfive:
This guide will help you get back to completely stock, unrooted Gingerbread (as if you just bought the phone). You can skip only the last step of that guide since you're actually keeping your phone. Then you can use this guide to start flashing custom ROMs without getting that triangle thing. I highly recommend reading both guides very thoroughly and multiple times so you understand everything. After doing so, feel free to ask questions about anything you don't understand from your reading and I'll do my best to help you out. And after you fully understand everything you are about to do, here's a list of ROMs, kernels, etc for your choice of flashing (most custom ROMs for this phone versions of ICS).
Click to expand...
Click to collapse
With great effort comes great reward
Sent from my SGH-I777
And if these things don't work, give as much detail to what you did, how and where things started going wrong... Again.
Good luck!
Clay
Team Pirate
Sent from my PINK SGH-I777
karate104 said:
TriangleAway only works on ICS.
OP thanks for trying everything yourself first and learning from your mistakes before posting! You have no idea how many people don't put forth the effort you have done already. So as a reward, I'll provide you with nice easy links to get you back up and running again! :highfive:
This guide will help you get back to completely stock, unrooted Gingerbread (as if you just bought the phone). You can skip only the last step of that guide since you're actually keeping your phone. Then you can use this guide to start flashing custom ROMs without getting that triangle thing. I highly recommend reading both guides very thoroughly and multiple times so you understand everything. After doing so, feel free to ask questions about anything you don't understand from your reading and I'll do my best to help you out. And after you fully understand everything you are about to do, here's a list of ROMs, kernels, etc for your choice of flashing (most custom ROMs for this phone versions of ICS).
Click to expand...
Click to collapse
122ninjas said:
With great effort comes great reward
Sent from my SGH-I777
Click to expand...
Click to collapse
Haha, thanks. I tend to find pleasure in finding out things for myself. I love messing and tweaking with things. But this has got me stumped. I am used to Apple (if I am allowed to use that word here ) And jailbreaking that was a breeze. This, is way more challenging and entertaining.
so this is all about the warning triangle? and how to get to ICS?
r u serious?
I had to of missed something, but already flashed i777 stock, so yeah
I'm guessing it was the fact that OP's post was written in decent English and explained his problem in fairly well, the steps he took to cause it and what he's done to try to resolve, that it took a whole hour for the regulars to jump in here with the typical bs posts. (and ya, I know this is a bs post also, but damn, it gets old reading these same guys crap)
spiralout1 said:
I'm guessing it was the fact that OP's post was written in decent English and explained his problem in fairly well, the steps he took to cause it and what he's done to try to resolve, that it took a whole hour for the regulars to jump in here with the typical bs posts. (and ya, I know this is a bs post also, but damn, it gets old reading these same guys crap)
Click to expand...
Click to collapse
No one jumped down this guys throat so chill out
Sent from Team Pirate!
Nick281051 said:
No one jumped down this guys throat so chill out
Sent from Team Pirate!
Click to expand...
Click to collapse
MotoMudder did.
Nick281051 said:
No one jumped down this guys throat so chill out
Sent from Team Pirate!
Click to expand...
Click to collapse
I didn't say anyone jumped down this guys throat. Now I can say to Nick: "Read before you post"!
spiralout1 said:
I didn't say anyone jumped down this guys throat. Now I can say to Nick: "Read before you post"!
Click to expand...
Click to collapse
Why are you trying to be such a ****? Honestly except maybe motomudder's (sorry man ) there weren't any bs posts and none were necessary. You say you get tired if reading the same old crap of telling everyone to do what they agreed to when they signed up but when we tell people to do it over and over it annoys you? Nice double standards.
Sent from Team Pirate!
Lol, I thought I was fairly nice. :angel:
Could've been an ass, but the OP did take time to post alot of info, so I chose to take the light route.
Just search people, its really not that hard.
MotoMudder77 said:
Lol, I thought I was fairly nice. :angel:
Could've been an ass, but the OP did take time to post alot of info, so I chose to take the light route.
Just search people, its really not that hard.
Click to expand...
Click to collapse
+1 before someone posts they must first pass this test..
Sent from Team Pirate running AOKP
hello, also a new user here, with a situation similar to OP's
I had a working, rooted ICS by flashing the siyah kernel. Then I ran ROM manager and ruined everything
I used "I777UCKH7 OCD Root No BL" to get back to rooted gingerbread, but it's full of errors "android.process.acore unexpectedly ended"
I don't want to make it worse, which is why I'm asking you guys. Do I need CWM to do a system wipe? Should I reset/wipe my phone first, then flash an ICS ROM? What about kernels - how do I go from UCKH7 to UCLE5 (if that makes sense)?
my end goal is just a rooted ICS
kernelsprite said:
hello, also a new user here, with a situation similar to OP's
I had a working, rooted ICS by flashing the siyah kernel. Then I ran ROM manager and ruined everything
I used "I777UCKH7 OCD Root No BL" to get back to rooted gingerbread, but it's full of errors "android.process.acore unexpectedly ended"
I don't want to make it worse, which is why I'm asking you guys. Do I need CWM to do a system wipe? Should I reset/wipe my phone first, then flash an ICS ROM? What about kernels - how do I go from UCKH7 to UCLE5 (if that makes sense)?
my end goal is just a rooted ICS
Click to expand...
Click to collapse
Don't. Use. Rom Manager
The End
Sent from Team Pirate running AOKP
is it possible to make it so when you visit this forum you get a big popup that says DON'T USE ROM MANAGER. IF YOU DO THEN WE AREN'T HELPING!
kernelsprite said:
hello, also a new user here, with a situation similar to OP's
I had a working, rooted ICS by flashing the siyah kernel. Then I ran ROM manager and ruined everything
I used "I777UCKH7 OCD Root No BL" to get back to rooted gingerbread, but it's full of errors "android.process.acore unexpectedly ended"
I don't want to make it worse, which is why I'm asking you guys. Do I need CWM to do a system wipe? Should I reset/wipe my phone first, then flash an ICS ROM? What about kernels - how do I go from UCKH7 to UCLE5 (if that makes sense)?
my end goal is just a rooted ICS
Click to expand...
Click to collapse
From my understanding you can do a wipe data/factory reset from 3e recovery while on KH7.....I'd search it beforehand. but IIRC.
But if you want stock. flash stock.
we dont need a working system to be able to flash a ROM with Odin or CWM.
---------- Post added at 10:55 AM ---------- Previous post was at 10:55 AM ----------
122ninjas said:
is it possible to make it so when you visit this forum you get a big popup that says DON'T USE ROM MANAGER. IF YOU DO THEN WE AREN'T HELPING!
Click to expand...
Click to collapse
so much more to add to that...
122ninjas said:
is it possible to make it so when you visit this forum you get a big popup that says DON'T USE ROM MANAGER. IF YOU DO THEN WE AREN'T HELPING!
Click to expand...
Click to collapse
LOL...yes. This, and we should also add that if you flash a ROM for the 9100 on your 777 you need to buy all the recognized devs on the 777 forum a beer
To kernelsprite: i don't have an answer for you, but I'm fairly sure that the people who can help you will need some more info. Can you boot your phone? If not, can you get into recovery or download modes? What ROM did you have in place before you used ROM manager? Was it just stock?
Hopefully with this info someone more knowledgeable than me will be able to help.

[Q] Rooting SGH-i777 that has stock ICS installed

Alright, I'm a noob...(loved the intro video!) and I've spent an hour or so searching for rooting info for my device. Did find a good thread that was over a year old about rooting SGH-i777 with older android versions, but was afraid to follow THOSE directions since mine has newer version (Android 4.0.4). And I find other threads about rooting other versions of GS2...not the AT&T.
So far I've learned NOT to use ROM Manager, and not to look to Galaxy2Root for help...so I guess there's that. I don't want to be stupid here, but can someone direct me to a thread with Rooting instructions for my phone with ICS already on it, and recommended ROMs. I'd like to have more control over my phone and take advantage of JB releases that seem to be out with good reliability. I'm used to doing this sort of thing on computers, but not with Android. Had my phone for about 15 mos....my first Android.
Suggestions?
TIA...
judib said:
Alright, I'm a noob...(loved the intro video!) and I've spent an hour or so searching for rooting info for my device. Did find a good thread that was over a year old about rooting SGH-i777 with older android versions, but was afraid to follow THOSE directions since mine has newer version (Android 4.0.4). And I find other threads about rooting other versions of GS2...not the AT&T.
So far I've learned NOT to use ROM Manager, and not to look to Galaxy2Root for help...so I guess there's that. I don't want to be stupid here, but can someone direct me to a thread with Rooting instructions for my phone with ICS already on it, and recommended ROMs. I'd like to have more control over my phone and take advantage of JB releases that seem to be out with good reliability. I'm used to doing this sort of thing on computers, but not with Android. Had my phone for about 15 mos....my first Android.
Suggestions?
TIA...
Click to expand...
Click to collapse
Use exynos abuse and you're rooted
Sent from my GS4 running CM11 Kandy Kane
122ninjas said:
Use exynos abuse and you're rooted
Sent from my GS4 running CM11 Kandy Kane
Click to expand...
Click to collapse
This is so far easiest thing to do, however be careful, DO NOT, DO NOT,
choose the "one click" patch option which come first, as that will patch
the system and you will NOT be able to root again. and there is NO way
to un-patch. I was not being careful and now trapped.
ExynosAbuse
122ninjas said:
Use exynos abuse and you're rooted
Sent from my GS4 running CM11 Kandy Kane
Click to expand...
Click to collapse
Appreciate the suggesting. Been researching ExynosAbuse, and looks like it could cause camera not to work, and in the compatibility list, though the Galaxy Sii 9100 is listed, the SGH-i777 is not...seems like a concern to me.
judib said:
Appreciate the suggesting. Been researching ExynosAbuse, and looks like it could cause camera not to work, and in the compatibility list, though the Galaxy Sii 9100 is listed, the SGH-i777 is not...seems like a concern to me.
Click to expand...
Click to collapse
It works trust me. Also you're going to flash a rom right after so you should be fine
Sent from my GS4 running CM11 Kandy Kane
I am also a noob when it comes to anything mobile. I got my GS2 last year (first android as well), and I've since updated to 4.0.4. I have also done some research on rooting(after my fiance keeps bugging me about "fixing" our gs2s due to them always turning off) but I was uncertain on what rom to use. I have no experience with phones, and I don't want to do something stupid and break our phones. I know that I am supposed to " use exynos abuse", but that's pretty much all I know/can find without reading every page on the 80 page threads. Are there any suggestions on a stable(ish) rom for us both to use/how easy is it to "use exynos abuse"? (without doing what tyhust did) We are fine with our ICS and I wont venture into the world of Jellybean yet... (maybe once I acquire some more experience)
Thanks in advance, and for the site in general, there is a TON of information on here...
tginouye said:
I am also a noob when it comes to anything mobile. I got my GS2 last year (first android as well), and I've since updated to 4.0.4. I have also done some research on rooting(after my fiance keeps bugging me about "fixing" our gs2s due to them always turning off) but I was uncertain on what rom to use. I have no experience with phones, and I don't want to do something stupid and break our phones. I know that I am supposed to " use exynos abuse", but that's pretty much all I know/can find without reading every page on the 80 page threads. Are there any suggestions on a stable(ish) rom for us both to use/how easy is it to "use exynos abuse"? (without doing what tyhust did) We are fine with our ICS and I wont venture into the world of Jellybean yet... (maybe once I acquire some more experience)
Thanks in advance, and for the site in general, there is a TON of information on here...
Click to expand...
Click to collapse
If you want you can downgrade to 4.0.3
Sent from my GS4 running CM11 Kandy Kane
4.0.4 to 4.0.3 root
122ninjas said:
If you want you can downgrade to 4.0.3
Sent from my GS4 running CM11 Kandy Kane
Click to expand...
Click to collapse
I'm also a noob... so if I want to down grade to 4.0.3 rooted from 4.0.4 stock, should I use ucle5_stock_rooted.tar with Odin?
Is is necessary to wipe since both are ICS?
Thanks!
[email protected] said:
I'm also a noob... so if I want to down grade to 4.0.3 rooted from 4.0.4 stock, should I use ucle5_stock_rooted.tar with Odin?
Is is necessary to wipe since both are ICS?
Thanks!
Click to expand...
Click to collapse
Yes, that should be the tar you use. Make sure it's from this thread. You should be okay without wiping, but if you have problems, I'd suggest flashing 2.3.4 and wiping from recovery once on 2.3.4; reason being, stock ICS kernel may brick your phone if you wipe with it (see linked thread for details on this eMMC superbrick bug).
OP, if you're uncertain about ExynosAbuse, try this method instead. I know it works, I used it myself very recently, albeit I was already on 4.0.3 and had not upgraded.
tginouye said:
I am also a noob when it comes to anything mobile. I got my GS2 last year (first android as well), and I've since updated to 4.0.4. I have also done some research on rooting(after my fiance keeps bugging me about "fixing" our gs2s due to them always turning off) but I was uncertain on what rom to use. I have no experience with phones, and I don't want to do something stupid and break our phones. I know that I am supposed to " use exynos abuse", but that's pretty much all I know/can find without reading every page on the 80 page threads. Are there any suggestions on a stable(ish) rom for us both to use/how easy is it to "use exynos abuse"? (without doing what tyhust did) We are fine with our ICS and I wont venture into the world of Jellybean yet... (maybe once I acquire some more experience)
Thanks in advance, and for the site in general, there is a TON of information on here...
Click to expand...
Click to collapse
This is a good thread.
I had the same issues with 4.0.4 and i found it was a live wallpaper app (water drops) causing my random "power off". Since switching to a different live wall paper, i have had NO random "shut downs".
I still want to root my S2 and this is the best thread i have found that addresses the stock 4.0.4
good luck.
Well, after a week of no shut downs, my phone just shut off. So i guess the live wallpaper was not the issue.
Back to the drawing board
Not to hijack the thread or anything but I'm new to this phone too. I understand the rooting process on ICS what I don't understand is installing a custom recovery and kernel. Why do you have to use a gingerbread kernel and why can you not just use stock? I've always just rooted, installed custom recovery and flashed roms on Verizon phones so installing a custom kernel to achieve custom recovery is foreign to me. I've been reading the stickies but I don't understand this....is it only to avoid the flash counter being tripped? Is there a easier way to install the recovery or am I making this harder than it needs to be? Thanks for any help!
Ryno77 said:
Not to hijack the thread or anything but I'm new to this phone too. I understand the rooting process on ICS what I don't understand is installing a custom recovery and kernel. Why do you have to use a gingerbread kernel and why can you not just use stock? I've always just rooted, installed custom recovery and flashed roms on Verizon phones so installing a custom kernel to achieve custom recovery is foreign to me. I've been reading the stickies but I don't understand this....is it only to avoid the flash counter being tripped? Is there a easier way to install the recovery or am I making this harder than it needs to be? Thanks for any help!
Click to expand...
Click to collapse
Our phone has recovery baked into the kernel. For what reason I don't know but I'm sure its a good one as just flashing recovery is IMO easier.
Thanks. Last question. After installing a gingerbread kernel and the baked in recovery do I need to install a new kernel to flash a jb or ics rom. Sorry for the noob questions. Thanks for your help.
Sent from my SCH-I535 using xda premium
Ryno77 said:
Thanks. Last question. After installing a gingerbread kernel and the baked in recovery do I need to install a new kernel to flash a jb or ics rom. Sorry for the noob questions. Thanks for your help.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Well since every ROM comes with a kernel in it (obviously or it couldn't run) then you just answered your own question bro. Flash away.
Phalanx7621 said:
Well since every ROM comes with a kernel in it (obviously or it couldn't run) then you just answered your own question bro. Flash away.
Click to expand...
Click to collapse
Thanks, that makes things easier. Appreciate the help!
Sent from my SCH-I535 using xda premium
Need more help.... There's so much information since this phone came out its overwhelming and it seems most of it was written for gingerbread. I have the phone rooted, mobile Odin lite installed and I'm confused on which kernel I need to flash. Phone is stock rooted lk3 4.0.4. Thank you!
Sent from my SCH-I535 using xda premium
Ryno77 said:
Need more help.... There's so much information since this phone came out its overwhelming and it seems most of it was written for gingerbread. I have the phone rooted, mobile Odin lite installed and I'm confused on which kernel I need to flash. Phone is stock rooted lk3 4.0.4. Thank you!
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
If you're just trying to get into recovery to flash something then any kernel will do. Since the system won't need to boot up with that kernel installed you're just flashing one to enter recovery.
Phalanx7621 said:
If you're just trying to get into recovery to flash something then any kernel will do. Since the system won't need to boot up with that kernel installed you're just flashing one to enter recovery.
Click to expand...
Click to collapse
So I want to install a gb kernel and recovery only so I can flash a custom rom that comes with kernel and recovery, correct? So before flashing the gb kernel in mobile Odin I should have a rom already downloaded on the sd card so I can immediately flash that? I'm sorry for all the questions this is drastically different from what I'm used to.
Sent from my SCH-I535 using xda premium
Ryno77 said:
So I want to install a gb kernel and recovery only so I can flash a custom rom that comes with kernel and recovery, correct? So before flashing the gb kernel in mobile Odin I should have a rom already downloaded on the sd card so I can immediately flash that? I'm sorry for all the questions this is drastically different from what I'm used to.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Download whatever ROM you want on your phone . Flash a kernel. Reboot into recovery. Profit.

[Q] Could use some help on installing philZ-cwm6

Okay so I have a Samsung galaxy s2 gt-i9100. I have rooted the phone and I thought to have installed cwm (which came with the root)
but I still boot into stock recovery (even though Rom manager tell me I have cwm 5.x.x installed or something along those lines).
I know now that the kernel resets to stock recovery. So i am running 4.1.2 and my build number (found in 'about phone') is JZO54K.I9100XWLSW.
I have downloaded 'philZ-cwm6-XWLSW-XEU-5.06.1.zip' from his XDA thread, and was wondering is this the right one for me. And since I am already rooted and all that I was also wondering if installing this will clash with my root and mess up everything- thanks in advance, I really appreciate the help.
You got the right one and are good to go.It won't "mess" anything,you'll basically get a stock kernel+cwm+root in a single flash.Good for starters if I may.
This is the exact method I used to root, and now I'm happily running my (probably) 30th different custom rom.......
Sent from my GT-I9100 using XDA Developers app
Don't use ROM Manager on S2. Ever. It's a sure way to screw things up. For some reason it seems to end up corrupting recovery on S2.
Why are n00bs so attracted to Rom Manager ? It's **** on any device. Only lazy people use it on the devices it actually works properly on.
MistahBungle said:
Why are n00bs so attracted to Rom Manager ? It's **** on any device. Only lazy people use it on the devices it actually works properly on.
Click to expand...
Click to collapse
Your not very nice, to be fair how am I supposed to know that it breaks the recovery. Everyone has to start somewhere
LiamFlannery said:
Your not very nice
Click to expand...
Click to collapse
There was nothing 'not nice' about what I said. Rom Manager is a POS. Lazy people use it. You weren't specifically mentioned in my post, you were lumped in with all the other n00bs. There's nothing special about you in that regard.
See ? That last sentence was somewhat 'not nice' *adds you to my ignore list*
okay thanks everyone for the helpful replies, also I was just wondering whats the difference between XWLSW-OXX and the one I am going to use which is XWLSW-XEU? just out of curiosity -thanks
LiamFlannery said:
okay thanks everyone for the helpful replies, also I was just wondering whats the difference between XWLSW-OXX and the one I am going to use which is XWLSW-XEU? just out of curiosity -thanks
Click to expand...
Click to collapse
Philz's kernel OP has answers to all your questions.
We should all do this on playstore.

Categories

Resources