Well the title pretty much says it all, just a basic thread asking some basic questions.
1) Do you use a case?
- If so which one?
- how do you like it?
- are you considering something else?/ If so which one? and why?
- Does it make the phone feel bulky?
2) Do you use a screen protector
-if so which one?
-how do you like it?
-are you considering something else?/ If so which one? and why?
-If you do not use a screen protector have you had any issues with scratches?
andybones said:
Well the title pretty much says it all, just a basic thread asking some basic questions.
1) Do you use a case?
- If so which one?
- how do you like it?
- are you considering something else?/ If so which one? and why?
- Does it make the phone feel bulky?
2) Do you use a screen protector
-if so which one?
-how do you like it?
-are you considering something else?/ If so which one? and why?
-If you do not use a screen protector have you had any issues with scratches?
Click to expand...
Click to collapse
1. Yep. Right now I have a TPU case but I'm looking at an Otterbox or something similar. Need to protect it better from work.
2. Oh heck yes. Despite being Gorilla Glass screen scratches still happen. I currently use a Zagg invisibleSHIELD. They have a life time guarantee and mild scratches tend to heal so you no longer see them. I won't be switching to another screen protector because these work so well.
1) Yes.
Had this one: Transparent Clear Protector Case Phone Cover For Verizon HTC DROID Incredible 4G LTE. Fit well, appeared to be good quality, but was bulky and slippery.
Switched to this one: Fosmon S-Curve Soft Shell TPU Case for HTC DROID Incredible 4G LTE - Black Like it much better. Fits well, Not at all bulky or slippery.
2) Also Yes
Have this one: GreatShield Ultra Smooth Clear Screen Protector. Very clear, but super fingerprinty. Will likely switch to something matte someday
I am currently using a TPU case, but I am waiting for Seidio to announce their surface case/belt clip combo for this phone; I've use the Seidio surface with all my previous phones.
I used to use a screen protector but stopped about a year ago.
i use the Trident Aegis case.
so far, I love it.
http://www.tridentcase.com/shop-products/htc-fireball-adr6410l/aegis-case-htc-fireball-adr6410l.aspx
Come with the screen protector that is pretty good quality. It is less bulky than the Ballistic case (which i also have).
Issues with the Trident are the headphone jack cutout is not wide enough in the direct of the front of the phone, needs to be filed out a bit and it's fine. The hard portion of the case is a little slippery, the guitar pick shaped area in the back is for the silicon to come through and give you non-slip when laying it on its back, this guitar pick area could be a little bigger or the hard part a less slippery material.
The colors don't seem to be quite as vivid as they look on the site, i got the blue, instead of being as bright as it is on the site, its more muted of a blue which is still nice, but not as nice.
The size to protection ration is perfect for me though. I wouldnt be afraid to drop it but can still use it as my everyday case. Also the silicon is a dust resistant one, Lint comes off very easy.
I was not happy with the ballistic due to its size and the silicon on it is a lint magnet. The ballistic corners on it while nice for grip, make getting it in/out of a pocket a pain. The hard shell on the ballistic has a much nicer feel though and is not slippery. The ballistic also does not come with a screen protector.
awesome, thanks for the answers guys!
guys it's my turn!
1) I use TPU black case from Verizon only when going on and I think I may need the extra protection.
I really like the fit of the TPU case it fits very snug, and the cut-outs for the power and the volume buttons make it a perfectly made cse + cheap. :good:
2) Un-characteristuic of me, but YES, I currently do have one on, my dad got the phone the same day and got a package, so I tossed one on.
but I took it off tonight.
don't need it TBH.
gorilla glass will scratch yes, but I'm very OCD lol.
I'm using the Incipio Feather, very nice on this phone. Seems better quality than the one I had on my Inc2.
Using some Verizon screen protectors because they were 10 bucks. Not too bad but they have camera and proximity sensor cutouts which I don't like, so I'll find some that cover the entire front.
Actually saw a very small scratch in the top right corner of the screen the first few days - decided it was worth peice of mind to spend $10 on a screen protector rather than find out gorrilla glass could scratch somewhere more irritating later. Picked up the verizon screen covers and the one on there seems to be holding up against scratches too. They don't cover the sensors/cam spots on the front as mentioned above but since those are over black areas scratches may not too bad (??)
I also tend to drop my phone every once in a while so I grabbed a cheap black/white TPU case off amazon (I think it was $15 with shipping) but the cut outs are too narrow and the volume rocker is really hard to push to activate. I'm waiting on Seidio to release an active case option and if they don't (or its not what I'm looking for) I'll probably go to incipio duo pro sycrillic's line.
I've just order the S-Curve TPU case and the Cruzerlite Androidified TPU case. Gotta see which one feels/fits better. Since the Inc4G isn't as wide as my Inc2, I think the added bulk won't be a problem. One question I have is about the TPU material sliding in and out of jeans pockets. Does it get stuck and pick up lint like the silicon case or is it fairly slick? Is it gonna be a battle royal every time I want to pull this thing out of my pocket?
Pandalero said:
I've just order the S-Curve TPU case and the Cruzerlite Androidified TPU case. Gotta see which one feels/fits better. Since the Inc4G isn't as wide as my Inc2, I think the added bulk won't be a problem. One question I have is about the TPU material sliding in and out of jeans pockets. Does it get stuck and pick up lint like the silicon case or is it fairly slick? Is it gonna be a battle royal every time I want to pull this thing out of my pocket?
Click to expand...
Click to collapse
I got the cruzerlite case and it is quite nice feeling. It has a mostly matte back and ribbed sides (bumpy).
It is easy to take out of pocket.
Sent from my ADR6410LVW using Tapatalk 2
I just ordered a black TPU cruzerlite Androidified case and a ZAGG screen protector. Been going naked too long. Sooner or later my luck is going to run out.
Sent from my ADR6410LVW using xda premium
edster00 said:
I am currently using a TPU case, but I am waiting for Seidio to announce their surface case/belt clip combo for this phone; I've use the Seidio surface with all my previous phones.
I used to use a screen protector but stopped about a year ago.
Click to expand...
Click to collapse
I've been liking my cheap TPU case, but completely agree about a Seidio case. I had one on my OG Droid and loved it... until it broke. Went case free after that.
Sent from my Fireball using Xparent Blue Tapatalk 2
No case yet but I do have an anti glare screen protector that also doenst really pick up fingerprints. I had an otterbox for my inc2 but stopped using it after a week or so. I'm not terribly rough on it at work and that made it way to big. I usually keep it in my pocket but will probably get one of those seido case/clip combo thing eventually
Sent from my ADR6410LVW using xda app-developers app
Related
I personally love the feel of my vibrant without the silicon casing on but unfortunately, I have to go with it whenever I leave the house to protect it from knicks and knacks (plus I always seem to drop my phone...)
I have a screen protector (REALOOK) and a TPU case. I too like the way the phone feels and looks without a case but yea, it needs to be protected. My old G1 got bang up pretty bad by not using protection... LOL...
I've had my vibrant in a case since day one but still have scratches all over the body. I think the shiny plastic material is just scratch prone. If I had to do over I would have tried some of the clear body armor type product. Definitely love the bare feel, may just go without a case and hope replacement parts become available.
Sent from my GT-I9000 using XDA App
I have the stealthguards screen protector and battery cover protector. Both are mainly on there just for weight and grip and the front is also on to make my vibrant have a flush front.
Silicone = ****
polyurethane Is The Way To Go, Alot More Protective And A Better Fit For Your Phone
I rock mine naked. I had a hard clear case for my G1, but it really didn't do a whole lot of good and my screen didn't get scratched at all. The Vibrant has gorilla glass and you get a 2nd back cover out of the box so I decided to go without.
I've got a realook screen protector and the tmobile gel case.
My battery cover AND the faux metal bezel are pretty scratched up. Been in the case since day one, so I suspect the gel case scratches it. Go figure.
I honestly didn't like the bare feel. Too slippery and small, so now I have a rubber case in it. Fits like a glove and grips better while still sliding out of the pocket without sticking. And of course a screen protector. I kept one on my g1 since day one. Its beaten to hell, the lip part is cracked and the sdcard unmounts if you apply pressure but the screen is flawless lol
Sent from my SGH-T959 using Tapatalk
I use a Casemate Tough Case and have been using this style of case on all my phones for years. Usually Otterbox, but they took too long this time around so I gave the Casemate a try. I never drop my phone, but I have two kids under 5, so the cases are definitely tested from time to time. There are no better cases if you want real protection, IMO.
Sent from my SGH-T959 using XDA App
I've got the hard Body Glove case with the black rubberized back. I haven't tried any other cases because I really like this one. The phone just felt too fragile to me without a case, this gives it a little bulk and makes it feel a little more substantial.
No screen protector. I haven't seen the need for one. I'm not super careful with it either and will carry it in a pocket with keys and loose change pretty often. Been doing this for 2 months and no scratches on my screen. The screen is definitely pretty tough.
this is a $500 phone, and it's slippery. I drop **** all the time so i got the silicon case. it looks lumpy, but it's worth it.
mmas0n said:
I use a Casemate Tough Case and have been using this style of case on all my phones for years. Usually Otterbox, but they took too long this time around so I gave the Casemate a try. I never drop my phone, but I have two kids under 5, so the cases are definitely tested from time to time. There are no better cases if you want real protection, IMO.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I have the same case and 3 kids under 5. Its the best option for me and feels really solid while holding.
I have hybrid TPU case, and so do allot of others here
...id vote but not listed in poll...hint hint
smutek said:
I've got the hard Body Glove case with the black rubberized back. I haven't tried any other cases because I really like this one. The phone just felt too fragile to me without a case, this gives it a little bulk and makes it feel a little more substantial.
Click to expand...
Click to collapse
Couldn't have said it better. I use the BG case, and love it -- the look, the kickstand, the added bulk. (The "naked" (ugh) phone is too thin to hold comfortably on a call; and others have said, it's slippery as hell.
I utilized the stealthguard front and back. So its practically naked.. but not naked
me like sexi like bikini oki
hottie girls
I'm amazed by the durability of the screen. I don't make it a habit of putting it in my pocket with anything inside, but when I have and cringed as I pulled it out expecting scratches, to my surprise no scratches.
As a rule, the harder the cover material, the more the shock will be transferred directly to the phone. The same for the sticker types which are more for protection against scratches.
I ended up buying a cover from tmo because the phone felt a little slippery by itself. Its made of silicone and think enough to absord some of the impact if it is dropped and us les likely to slip out of your hand.
Sent from my SGH-T959 using Tapatalk
I bought the tmo black silicone case. I really like it because it adds grip and gives the phone a more solid, quality feel. One thing I've noticed is if you take the back cover plate off too much...it gets loose and creaky. They really should have gone with the slide lock type.
Sent from: my Vibrant juiced with Eugene's 2.2 Froyo JPM
Case-Mate Tough Case.. no screen protector here
I use a RealLook screen protector and one of these clear, hard cases:
http://www.buy.com/pr/product.aspx?sku=217139826
Super inexpensive (bought 2, 1 extra to have on-hand)! Been using clear hard cases like these since my MyTouch3G and I've dropped it (the MT3G) several times onto concrete without a single scratch or damage to the phone. The case took the brunt of the impact. Put a very small crack in it, but nothing else. Ended up replacing it anyway, but that was enough to make me buy them for the Vibrant now. I just don't get that sense of protection from a semi-thin silicone sleeve. Sort of like gluing a bunch of balloons to the exterior of your car and thinking it's going to protect you in a head-on collision. Just not buying it...
I just wanted to share a great case with everyone. I had one for my 3D and loved it. They put me on a mailing list to be notified when they made one for the EVO 4G LTE and I finally got the email Wednesday. This morning I got the case and I love it! It covers buttons, has a great finish and feel, and is comparable (but slightly sturdier) that the TPU cases.
http://www.incipio.com/HTC-EVO-4G-L...EVO-4G-LTE-NGP-Semi-Rigid-Soft-Shell-Case.asp
daleybox said:
I just wanted to share a great case with everyone. I had one for my 3D and loved it. They put me on a mailing list to be notified when they made one for the EVO 4G LTE and I finally got the email Wednesday. This morning I got the case and I love it! It covers buttons, has a great finish and feel, and is comparable (but slightly sturdier) that the TPU cases.
]
Click to expand...
Click to collapse
How would you say the texture is on it? I have small hands so a little bit of grit helps me hold onto the thing, but I don't like the super sticky feel that makes it impossible to get out of your pocket
I have a barely there feather one for my ns4g and like it but this looks much better with corner protection.
Hopefully they make a white one for us too.
Sent from my EVO
So is this like a TPU case or is it between a TPU and hard plastic? It looks interesting but I wonder how much protection it really gives.
ristrettodreams said:
How would you say the texture is on it? I have small hands so a little bit of grit helps me hold onto the thing, but I don't like the super sticky feel that makes it impossible to get out of your pocket
Click to expand...
Click to collapse
I think it would be perfect, it is not stickey/rubbery but it gives just a little added grip. It adds just enough bulk to feel solid without any real added weight. It slides in and out of pockets easily as it doesn't 't have many openings to catch on anything.
Toast95135 said:
So is this like a TPU case or is it between a TPU and hard plastic? It looks interesting but I wonder how much protection it really gives.
Click to expand...
Click to collapse
It's more like a stiffer TPU case. It's not as flimsly/rubbery as the TPU case, but basically the same form factor, weight, etc. with a little more sturdy feel. It's not going to give much more protection than a TPU case, but it will give a little more because it is more rigid. I think one of the main advantage over the Diztronic TPU cases is that it covers all the buttons and eliminates those flexible areas that make it hard to hit the buttons.
I have dropped my 3D in the 3D version of the case from 3 to 4 feet onto concrete numerous times and there were no scratches or visible damage to the phone. It also provides that slight lip around the screen so it doesn't touch if laid flat.
Have you noticed any issues with pressing the buttons? That seems like the main criticism about this case. I'm really liking this one, TPU seems too flimsy and I rarely ever drop my phone (I dropped my Epic maybe 3 times) so I don't need something bulky.
I dented my Evo today so I'm on the hunt lol.
daleybox said:
It's more like a stiffer TPU case. It's not as flimsly/rubbery as the TPU case, but basically the same form factor, weight, etc. with a little more sturdy feel. It's not going to give much more protection than a TPU case, but it will give a little more because it is more rigid. I think one of the main advantage over the Diztronic TPU cases is that it covers all the buttons and eliminates those flexible areas that make it hard to hit the buttons.
I have dropped my 3D in the 3D version of the case from 3 to 4 feet onto concrete numerous times and there were no scratches or visible damage to the phone. It also provides that slight lip around the screen so it doesn't touch if laid flat.
Click to expand...
Click to collapse
In terms of thickness and adding bulk, how does it compare to the Diztronic TPU cases?
clankfu said:
In terms of thickness and adding bulk, how does it compare to the Diztronic TPU cases?
Click to expand...
Click to collapse
I went back and forth for about 20 minutes between the black and translucent mercury, but ended up buying black. Something tells me if I like it I will end up with the other at some point haha. I love the Diztronic cases but like the buttons covered, so this sounds perfect. Will be a good change of pace from the Otterbox Commuter from time to time.
What color did you get? Any pictures of your own?
daleybox said:
I think it would be perfect, it is not stickey/rubbery but it gives just a little added grip. It adds just enough bulk to feel solid without any real added weight. It slides in and out of pockets easily as it doesn't 't have many openings to catch on anything.
Click to expand...
Click to collapse
Sounds awesome, I'll pick it up. I have the bodyglove case currently and it's already cracked on me just from normal usage, no drops.
Toast95135 said:
Have you noticed any issues with pressing the buttons? That seems like the main criticism about this case. I'm really liking this one, TPU seems too flimsy and I rarely ever drop my phone (I dropped my Epic maybe 3 times) so I don't need something bulky.
I dented my Evo today so I'm on the hunt lol.
Click to expand...
Click to collapse
It was different coming from the open TPU so it took a little getting used to, but I like it much better. It's not hard once you use it for a day or so.
Just ordered the translucent mercury version. Coming from the the blue silicone case that Sprint sent out to the preorderee's. Getting a little tired of how much it sticks to the inside of my pocket, so hopefully this will be an improvement in that regard. Will let you guys know how it is once I receive it!
By the way, entering the promo code SUM2012 at checkout will save you $4.00 on the case. It's good until the 20th of August. Just sharing!
Also love this case had it with my epic touch and iPhone just ordered it for my new evo !!
Is the material like the casemate barely there? Does the camera have a elevated lip to protect the camera ?
Sent from my EVO using Tapatalk 2
skwon said:
Is the material like the casemate barely there? Does the camera have a elevated lip to protect the camera ?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I just ordered one, but from what I've read it's similar to the diztronic tpu case but the material is a little thicker.
Mine shipped
Mine "partially shipped" this morning, I dunno what that means but okay. Maybe I'll get a the packaging but no case lol
is this case just a tpu material? Does the back protect the camera frame from getting scratched if put down on surface?
In case anyone cares they just released their Feather case. I literally just ordered the NGP yesterday and may order one of these as well. The blue looks nice as I've grown accustomed to the color of the Silicone Case Sprint sent to pre-orders.
http://www.incipio.com/HTC-EVO-4G-LTE-Cases/HTC-EVO-4G-LTE-Cases.asp
If anyone has the Diztronic TPU case, I would say these are almost identical in size. I really couldnt see any difference. It feels the same in hand, but covers the buttons, and is much more rigid.
I read one account of a user having issues with a Surface case and a tempered glass screen protector. Anybody using that combo and is it working ok?
hawkeye680 said:
I read one account of a user having issues with a Surface case and a tempered glass screen protector. Anybody using that combo and is it working ok?
Click to expand...
Click to collapse
Bumping one more time because they are on sale today. Will it work ok with a TG screen protector?
http://www.shopandroid.com/seidio-surface-case-with-kickstand/4A123A15688.htm
Sorry I can't help you with your question. But that's a good price for the case just can't believe they don't do it in white. Thanks for the link
Sent from my GT-N7105 using xda app-developers app
Hope someone chimes in as well, that's a good price.
Sent from my SM-N900T using Tapatalk
Well don't know if this helps but my last experience with seido surface for the GS4 was pretty bad after a month use the rubberized paint on it started wearing off and Seido refused to do anything about it. I used to always get their holsters for my HTC phones and had no issues. 1st case I had an issue with they refused to do anything about it and I paid $50 direct from seido also. I would not buy another seido product. But that's just me. The price is nice though I just would not expect it to last more than a month without the finish pealing off.
I read here that it wouldn't work with a TG unless it was a really thin TG. Not sure if true or not.
I was the user that had the issue. I do not recommend it. I had the SPIGEN GLAS.tr. It pushed the screen protector down almost making a cracking sound, to which i saw air bubbles form. The bubbles went away after I put it on with a decent amount of force. This stupid case is not meant to work with a good screen protector because it hugs the phone too tight. I guess that was the purpose of their design. The biggest issue was taking it off. People without screen protectors on Amazon complain about how hard it is to take off without a screen protector. Now, with one, it's IMPOSSIBLE. I cannot explain to you enough how IMPOSSIBLE it is (NOTE: I'm a strong enough guy 180 lbs 6 feet tall athletic build. I open and lift things easily without issue when it comes to impossible soda bottles or things that get stuck in the house). I ruined my silver bezel edge with a tiny scuff due to this stupid case as I tried for 30 minutes to get it off. It just would not come off. So I was like screw it. I ended up just pulling the area where both pieces connect and yanking it to the side while digging (damaging my nail) to have them disconnect and send the bottom piece flying. Luckily, there was no damage to the case so I was able to get my money back and full refund on Amazon. However, the silver plastic top bezel had a tiny scuff, which really annoyed me because I'm OCD like that and keep my phones and other tech flawless with protective cases/screen protectors; I keep my items in NEW/MINT condition if I ever want to sell something. Also, I don't mind buying the casing to replace the bezel, which I did for my Note 2 when it fell on concrete with a case that did not protect the top or bottom (like SPIGEN Ultra-fit). However, with the Note 3, they have the Silver Plastic glued to the screen LCD portion instead of the backside like the Note 2. So that means instead of 15 bucks you have to spend $200+ to replace it. NOT WORTH IT.
This was just way too difficult. Save yourself the trouble if you really want to protect your phone and your screen. You're better off with a UAG or something similar. I use the SPIGEN Bounce and it works very well with the GLAS.tr.
@opasha Do you have the holster for the Surface case, and do you have any other cases? I'm curious how well other cases fit in both the Surface holster and Dilex holster. Can't decide if I'm gonna buy one of those holsters, or the holster for the naked phone.
SwiftKey'ed from my White Sprint Note 3 via XDA Premium
stanglifemike said:
@opasha Do you have the holster for the Surface case, and do you have any other cases? I'm curious how well other cases fit in both the Surface holster and Dilex holster. Can't decide if I'm gonna buy one of those holsters, or the holster for the naked phone.
SwiftKey'ed from my White Sprint Note 3 via XDA Premium
Click to expand...
Click to collapse
Sorry bro, I never really use holsters. My dad does. He has a UAG case for his S3 and the DILEX and SURFACE were too small. However, the CONVERT holster fit perfect for him. I have a BOUNCE case and I'm sure the DILEX holster would work for that. I'm pretty sure for anything to fit in a SURFACE holster, you would need to have a very bare minimum case like SPIGEN ULTRA-FIT or something along those lines...if that.
opasha said:
Sorry bro, I never really use holsters. My dad does. He has a UAG case for his S3 and the DILEX and SURFACE were too small. However, the CONVERT holster fit perfect for him. I have a BOUNCE case and I'm sure the DILEX holster would work for that. I'm pretty sure for anything to fit in a SURFACE holster, you would need to have a very bare minimum case like SPIGEN ULTRA-FIT or something along those lines...if that.
Click to expand...
Click to collapse
That's cool, I appreciate it anyway! I thought I'd read before that the Bounce case fit in the Surface holster, but want to be sure before I make the purchase. I would imagine it will, as the Bounce and Surface cases are pretty similar in size. I'm afraid that the Dilex holster will be too big, and not hold the Bounce(or a similar sized TPU case) very tight.
Sent from my White Note 3 via TapaTalk
stanglifemike said:
That's cool, I appreciate it anyway! I thought I'd read before that the Bounce case fit in the Surface holster, but want to be sure before I make the purchase. I would imagine it will, as the Bounce and Surface cases are pretty similar in size. I'm afraid that the Dilex holster will be too big, and not hold the Bounce(or a similar sized TPU case) very tight.
Sent from my White Note 3 via TapaTalk
Click to expand...
Click to collapse
Yeah, I feel you. The Bounce does feel very similar if not a little thinner than the Surface. It actually might fit.
Got my Surface today! I love it. It's exactly what I hoped. The only problem, which is a big one by the way, it's not compatible with my 9H Iloome. The protector started to bubble on one of the corners. It was so tight that I wasn't sure that I could get it on and it also wouldn't snap closed. If you take the battery cover off, it fits just fine. But I'm not sure that I want to use it like that. I may buy a thinner TG screen protector, like the iloome flex, but I'd hate to throw away the $25 that I spent on the 9H.
Just ordered it tonight and will post pictures when I finally get it. That was my favorite case, with the standard battery, for my s4 when I had it. Slim, rubber inside, hard shell outside, rubber ribs for grip and anti slide on the back. It never interfered with a tempered glass screen protector, as long as you installed it perfectly centered in accordance with the edges of the frame, not the home button. It's on sale, this weekend, and I'm guessing until cyber Monday, for five dollars off and free shipping via USPS. http://www.speckproducts.com/smartphone-cases/samsung/candyshell-grip-for-samsung-galaxy-note-3.html
Nice find. I like Speck. They make quality stuff.
Sent from my SM-N900P using Tapatalk
Never used a speck case before I like the design ..how does it. Compare to a uag or otterbox commuter in terms of size/protection?
Sent from my SM-N900V using Tapatalk
It's similar to a UAG in terms of protection. One layer silicone inside lining, attached to the plastic exterior.
Different then a commuter with a wrap around silicone lining with a separate exterior hard lining
Sent from my SM-N900V using xda app-developers app
It's smaller than the commuter. When you install or remove it, the case is all one piece. The layers don't come off. Easy to put on or take off. Shouldn't need reaming mod for most headphones. Won't slide when placed on a surface back down. Good amount of lip protecting the screen and camera. The rubber layer is slightly harder density than rubber on otterbox.
Def glad to see it out for the Note3. I plan on ordering this when 12am hits for cyber monday from the Speck website. Just wish they had the white and black version like they usually do.
I had a Speck candyshell (non-grip) for the iPhone 5s and loved it. It was hot pink and white but it was only $5. Not digging the Spigen Neo Hybrid because its way to slippery for a phone this big. The issue I see here is that it's $40.
Edit: Speck has a holiday deal knocking the price down to $35.
Edit 2: The case is now $30 after 25% off.
I love my tech 21 for my note 3, but would be interested in the Speck. I like the candyshell over the Candyshell grip though
Looks like black is out of stock.
Sent from my vzw note 3
Glad I ordered mine before making this post. Hopefully I'll get it before Friday. I'll post pics when I get it. Lots of close ups so you all can see the details.
Previous reply was rejected. I'm not going to type out all that again. My pictures and a video turned out crappy and out of focus. Long story short. This case protects better than just tpu but less than otterbox defender. It's slender and fits snug. The same quality you can expect if you've ever owned a speck case before. Grip ribs help with sliding but won't make it an effort to get out of a pocket like a glossy tpu or silicone case. Quality of build and function I give it five out of five. It's not cheap but you get what you pay for. This case will definitely be my daily driver!
gcforreal said:
Never used a speck case before I like the design ..how does it. Compare to a uag or otterbox commuter in terms of size/protection?
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Tight fit!
They are better at excluding dust than any other case in my experience. If they used a plug to cover the USB/earphone jack openings they would be better than anything else out there for this kind of protection.
That's a good thing too as being harder to put on and take off means intrusive dust could potentially grind on the finish, etc.
Bad news for battery swappers though.
Protection is good, you can literally toss it at a brick wall repeatedly and not worry about damage or even the case coming off in between throws. The grip is also far better at not showing wear/scratches from sitting on tables, etc. like the normal version. The high gloss back of the normal version will reveal marring/scuffing of sitting on tables, countertops, etc. in relatively short order.
Bulk-wise they fall in between a minimalistic TPU (Diztronic, Bounce, Tudia, etc.) and UAG with protection on par with UAG.
Its asking price is fair for the quality received.
Just got mine today and fitment, quality, etc. is identical to past Speck products.
The buttons are covered, retain their clicky tactile feel and are no more difficult to depress than the naked phone! Fit is very snug, have not tried to take it off. It feels identical in hand to the candyshell grip that I use on my HTC one. It adds very little thickness, very similar to a TPU with far better drop protection. Even with a TPU I cringe if the phone slips, no worries here. Cutouts are well aligned and very tight. The S-pen cutout is quite tight requiring a fingernail to pull it out.
The camera is recessed sufficiently to prevent issues with setting down/dropping back first on a hard surface. The overall feel is it's well thought out and does not look thrown together like some other cases that were rushed to production. Worth the $$$ and I got another five bucks off ($30 total) by using a CNET coupon code. I always Google for codes when I see it on a website at checkout. Not sure if it's still valid and the black grip is OOS now...
Amazon doesn't even have this case (yet) and to get it for $10 off is a no-brainer!
Its a nice case i love the way the button, might have the best feedback but this case is worthless, within a few hours scratches will start to form and by the 2nd week you already want to replace because of the scratches. The darker the case the faster the scrtches will appear
I didn't notice scratches with my s4 and I had the case for months. Even so, it's better for the case to get scratches than the phone.
oscarthegrouch said:
I didn't notice scratches with my s4 and I had the case for months. Even so, it's better for the case to get scratches than the phone.
Click to expand...
Click to collapse
then you must carry it in a cloth because everyone knows specks cases scratch within like 1 day like they've been in a warzone. they are great cases but they don't keep the look.
$40 for that? Ouch. Looks like it should be $19.99 to me.
Yeah I keep mine in my pocket with nothing else in that pocket.
I never liked the Speck Candyshells. They scratch up like it's no one's business. They do look real good when you take it out of the package though.
Best thing is that they will replace their cases without any questions asked
Sent from my SM-N900T using Tapatalk
Anyone have any of the SUPCASE Cases?
I am looking at the
Unicorn Beetle Premium Hybrid Protective Case (Frost Clear/Gray)
http://www.amazon.com/SUPCASE-LG-G3...TF8&qid=1407151419&sr=8-7&keywords=lg+g3+case
Unicorn Beetle PRO Series Full-body Hybrid Protective Case
http://www.amazon.com/SUPCASE-Case-...TF8&qid=1407161034&sr=1-4&keywords=lg+g3+case
I have the Spigen Slim Armor now but its too slippery and the back scratches easily.
The bigger cut outs of the back buttons on the SUPCASE look like they would be better then how the SlimArmor is setup.
Can any provide any pictures of theres and how they like it? Or if they bought one but ended up not liking it and getting something else?
I received the first one you mention on Friday (clear/black) and I love it.
The fit is tight and the cut outs are perfect. It keeps the phone pretty slim and looks great with the clear back.
I had a similar case for my galaxy s4 from poetic and it was just a great look for me.
If you're rough with your phone and it gets banged around alot or dropped alot, then this might not be for you.
It offers average protection, which is good for me 90% of the time as I work in an office or I'm in my car.
For slightly better protection I bought the verus iron shield which I should be receiving today and am very excited about.
It also looks great and will protect my g3 a little better on the weekends.
Anyway, I do highly recommend the supcase after a few short days and the price is pretty good too.
As far as pics, the ones on amazon do it justice.
Hope this helps. There are many good cases and you won't do wrong with any of them.
Androider4Life said:
Anyone have any of the SUPCASE Cases?
I am looking at the
Unicorn Beetle Premium Hybrid Protective Case (Frost Clear/Gray)
http://www.amazon.com/SUPCASE-LG-G3...TF8&qid=1407151419&sr=8-7&keywords=lg+g3+case
Unicorn Beetle PRO Series Full-body Hybrid Protective Case
http://www.amazon.com/SUPCASE-Case-...TF8&qid=1407161034&sr=1-4&keywords=lg+g3+case
I have the Spigen Slim Armor now but its too slippery and the back scratches easily.
The bigger cut outs of the back buttons on the SUPCASE look like they would be better then how the SlimArmor is setup.
Can any provide any pictures of theres and how they like it? Or if they bought one but ended up not liking it and getting something else?
Click to expand...
Click to collapse
Thanks for the input.I was looking at the Versus Thor case also but some reviews said it affects signal. And the back button cut out on is tight like on the slim armor and that kinda bothers me..The supcase button cuts are larger which i think would be better
I'll let you know about the verus as I'll have it this afternoon.
I read the same about signal but I also read in more places that it wasn't true.
The video reviews on youtube really sold it for me an hopefully I like it as much as I think I will.
Take it easy.
Androider4Life said:
Thanks for the input.I was looking at the versus also but some reviews said it affects signal. And the back button cut out on is tight like on the slim armor and that kinda bothers me
Click to expand...
Click to collapse
I have the first one and agree with bkrickels.
I might prefer something a little thinner, but this certainly isn't bulky. No complaints on the back buttons with this.
Definitely no issue with signal. I can keep a call up every time driving on this one road that my GS3 dropped the call on every time.
I do hope Qi works through this case. I'll probably know that next week when my sticker comes.
lexluthor said:
I have the first one and agree with bkrickels.
I might prefer something a little thinner, but this certainly isn't bulky. No complaints on the back buttons with this.
Definitely no issue with signal. I can keep a call up every time driving on this one road that my GS3 dropped the call on every time.
I do hope Qi works through this case. I'll probably know that next week when my sticker comes.
Click to expand...
Click to collapse
Back button complaint was on the Verus Case and my slim armor..signal issues was geared towards reviews on the Verus case
I got the Unicorn Beetle and so far I like it. It has a good feel in your hands but it does add some bulk to the rear of the phone. It is a somewhat thick case and does add some mm onto the phone and weight.
I forget how much it does so until I remove the case and feel how light and thin the G3 actually is.
It does offer some great protection and this case WILL NOT bounce or fall apart during a fall or impact. The G3 fits impressively nice and snug in its case.
It is a PITA to remove the phone though, this thing is practically cemented in but once you know how to get it off, but just doesn't take as long but still is hard to do so.
It does come with a built in screen protector but I didn't need it because I had a tempered glass one installed. So I removed it and then had to spend half an hour removing all the glue that was holding it in place. The damn protector just pops out and leaves ALL its glue and adhesive on the inside of the front section of the case.
I used Goo Gone, thinner, hot water and soap and I still had to scrub it off. What a PITA...
But, I need a rough and tumble case for my job and the Unicorn does it.
Just be forewarned, it does add a bit of bulk and weight to the phone but it feels good holding it and! It has its corners notched off, giving it a Galactica prop like effect.
JustLok said:
I got the Unicorn Beetle and so far I like it. It has a good feel in your hands but it does add some bulk to the rear of the phone. It is a somewhat thick case and does add some mm onto the phone and weight.
I forget how much it does so until I remove the case and feel how light and thin the G3 actually is.
It does offer some great protection and this case WILL NOT bounce or fall apart during a fall or impact. The G3 fits impressively nice and snug in its case.
It is a PITA to remove the phone though, this thing is practically cemented in but once you know how to get it off, but just doesn't take as long but still is hard to do so.
It does come with a built in screen protector but I didn't need it because I had a tempered glass one installed. So I removed it and then had to spend half an hour removing all the glue that was holding it in place. The damn protector just pops out and leaves ALL its glue and adhesive on the inside of the front section of the case.
I used Goo Gone, thinner, hot water and soap and I still had to scrub it off. What a PITA...
But, I need a rough and tumble case for my job and the Unicorn does it.
Just be forewarned, it does add a bit of bulk and weight to the phone but it feels good holding it and! It has its corners notched off, giving it a Galactica prop like effect.
Click to expand...
Click to collapse
Thanks for the info..This Unicorn Beetle PRO Serie is case I am leaning towards..On my past phones Glaxay Nexus and Note 2 i used Otterbox defender and Seidio cases. So I would assume this adds about the same bulk.
Do you have any pics of the phone in the case or side by side to how much bulk it does add?
Also curious if the back scratches easy or holds up well.
I have a glass protector also so id be removing the bultin one
Ordered the Verus Thor from Amazon and I ended up sending it back. To me, it wasn't slim. It added some bulk to it. I have the Seidio Surface and I love it. Minimal bulk and still keeps near its original form factor.
i have the one with the clear back and i had it on my m8 and it is one of the best cases out there.
I just got my G3 on Friday and the first thing I did was go on Amazon and order the Clear/Black Supcase and temepered glass screen protector. They really make the best slim TPU style case. Nice and tight fitting, never had to worry about the material stretching on your like other TPU style cases. If there is a Supcase for my device im running it plus tempered glass and im good! Can't go wrong with it.
Not concerned with the case keeping a slim design..I'd rather have protection over looks
Using a Supcase, black with black.
Slim and works fine with my tempered screen protector.
Androider4Life said:
Anyone have any of the SUPCASE Cases?
I am looking at the
Unicorn Beetle Premium Hybrid Protective Case (Frost Clear/Gray)
http://www.amazon.com/SUPCASE-LG-G3...TF8&qid=1407151419&sr=8-7&keywords=lg+g3+case
Unicorn Beetle PRO Series Full-body Hybrid Protective Case
http://www.amazon.com/SUPCASE-Case-...TF8&qid=1407161034&sr=1-4&keywords=lg+g3+case
I have the Spigen Slim Armor now but its too slippery and the back scratches easily.
The bigger cut outs of the back buttons on the SUPCASE look like they would be better then how the SlimArmor is setup.
Can any provide any pictures of theres and how they like it? Or if they bought one but ended up not liking it and getting something else?
Click to expand...
Click to collapse
I'm rocking the Hybrid Case and love it. I've been an exclusive Spigen customer for years but their case had that cutout which turned me away. This Supcase has the same protection level and looks just as good. The clear back keeps the phones sharp look too. Highly recommend!
I have the first one in gray/clear on my white G3. Looks good. Good protection. Have to agree on earlier post that it is difficult to remove phone from.
Did you look ringke max case? For me is perfect one
i bought both!
i love the frost one and the bigger when when i plan to go outdoors (camping, hiking)
but the slimmer frost one is my daily.
I have one but found the straight edges make it a little uncomfortable to hold. I've gone back to the ultra slim gel case from eBay for about 2.99 feels great and noticeably lighter.
i have the slim sup case.
I like how tight fit it is, even though sides are soft, because fit is so tight, it doesn't move at all. really good case
i don't like how the back is so slippery.
try the Digtronic one too.. I'm tempted to order that one as a backup case.
I have the first case you posted in clear with Gray edges. It looks great on my white phone. My only complaint is that the cut outs on the bottom are uncomfortable. When I am playing with my phone for a while. They irritate my pinkie.
Sent from my LG-D850 using XDA Free mobile app