Does anyone know how to change the ViewPad 7 boot behavior when power is plugged in when the device is turned off? Right now it only shows a charging animation but I would like it to boot straight into Android as soon as a power source is plugged in. Any ideas?
Moved to General.
Related
So I saw the posts showing how others have had playlmp, lmp, ipod files that they would edit for line to make the phone boot when you plug power in... But this phone doesn't have any of those names in system/bin... Tons of files but not those names...
Running 4.1 android
Basically I want when the phone is off, if I plug power in it will auto boot. As it is now, the phone will not boot, it's just turns on to the green battery bar, moving up and down indicating it's charging... Please help
BTW I AM ROOTED
Hello
My Kurio TAB 2 got into an infinite boot loop. The battery got completely drained and when plugging the charger it will charge for a minute and then it will try to boot again. Afterward it's off (not enough battery), then again charging for 1 minute and trying again to boot, and so on. Looks like this tablet everytime it's connected to a charging source it will try to boot if turned off...
I had to unsolder the battery and charge it manually. After that tried to get into Recovery mode but it will not work. Every time it will try to boot like when normally switching it on, and after a minute, the screen goes black and then tries to boot again (boot loop). I tried to boot into recovery mode with Volume Down + Power button, then releasing the power button and holding the Volume Down button. Also the same with Volume Up + Power Button. Nothing made a difference. Every time it will just boot in an infinite loop until the batter is drained. To avoid this, I have to always disconnect and then connect back the battery.
Also tried to boot it into recovery mode using ADB tools (with "adb wait-for-device"), but without luck.
One "interesting" thing, is that when connected to the PC and booting (from itself), I can hear the sound of "New device connected" and after 1-2 seconds the disconnected sound. These connect/disconnect sounds will happen twice in the first ~10 seconds of one boot cycle.
The problem started from one day to another. My kid was playing with it as usual and after it was discharged and turned off, I plugged the charger and this loop started.
Would be great if anybody could help or has an idea of what I could still try to fix this.
Thank you!
Hello
I have the same problem here.
Is there already a solution for this?
After leaving the tablet to charge overnight, I found that it was stuck on the wave animation. Holding the power button fixed it and gave me the ability to use it again. Unplugged charger and thought tablet was ok. After a while I find that it's stuck in the animation again, so I figure a restart would do it good, after holding the power button for who knows how long I manage to restart it, but it gets stuck at the "restarting" message. After a while it falls asleep and when I wake it up, it is once again stuck in the animation. I hold power button, but this time nothing happens, so I open the micro SD thing next to the charger thing, and press the tiny red thing beside the black thing(sd card?) and it shuts down. Holding the power button to start it takes it first to the Sony text, then some more Sony text, but after that it gets stuck in the wave animation. Another thing to note is that I was using about 90% of it's storage so was thinking this is a reason.
Anyone know of a fix?
I'm open to installing a custom ROM or factory resetting it, don't really have anything important that I want to recover, just want to turn it into something usable again.
A link to one of these guides would be helpful.
When plugging it into PC via USB I cannot get it to show up in xperia Companion. It does show up in Devices I think, but I can't use it for anything.
please you guys should help me. my lenovoA5000 is not showing the charging icon but its charging when plugged to a power source. it also get hot and goes of after some time after displaying "phone needs to cool down" . If switch off and plug to a power source, the display comes on and goes off and it continues in that way and gets very hot untill i unplugged it from the power source. The worst of all it cannot factory reset it self and cannot open recovery mode. i need your advice and suggestions. thanks
Hey everyone,
I have an issue with the bike tablet no longer turning on.
Previously, the bike wouldn’t boot past the P boot loader. I got it into fast boot with Power + Volume Up. There, I went to recovery. This presented a screen with an error robot and text “No command.” I powered the device off, planning to go back to fast boot and try something else, but now I can’t get the device to turn on.
I’ve tried
- holding the power button for extended periods of time
- holding the power button + volume up for an extended period of time
- directly connecting the power to the monitor
- unplugging for several hours to let batteries and capacitors drain
- using adb. Adb does not see the device, though windows device manager does recognize something is connected via usb
Ultimately, the screen is a large Android tablet so hoping someone could help out. Any suggestions?