Cyanogen mod 9 on galaxy s3 locked my phone. - Galaxy S III Q&A, Help & Troubleshooting

Hello,
This is my first time installing a custom rom and I hope i did everything right. I installed CM9 using the guide found on their wiki page and installed it successfully. But after installation i cannot get my sim card to work on the phone.
Recovery: ClockWorkMod
CM9: 9.0.0-i9300
Galaxy SIII international.
Thanks in advance
Muzammil Ahmed

muxammle said:
Hello,
This is my first time installing a custom rom and I hope i did everything right. I installed CM9 using the guide found on their wiki page and installed it successfully. But after installation i cannot get my sim card to work on the phone.
Recovery: ClockWorkMod
CM9: 9.0.0-i9300
Galaxy SIII international.
Thanks in advance
Muzammil Ahmed
Click to expand...
Click to collapse
try reinstall a stock rom, check if everythings is fine then reinstall CM9

Thnx for the quick response
I think the problem isn't cm9, when I was trying to install the from I couldn't boot to the cwm recovery because I forgot to root my device. Then I rooted my s3 with cf something root kit and then my signals were gone. I have the international version so my phone should be factory unlocked so I thought I should install cm anyway cuz that might solve the problem. But it didn't. I really like cyanogenmod and don't want to revert back to crappy touchwizz . The problem was there before installing cm9 but after rooting my phone.
Please any help. I really need to use my phone.
Thnx
Muzammil

muxammle said:
Thnx for the quick response
I think the problem isn't cm9, when I was trying to install the from I couldn't boot to the cwm recovery because I forgot to root my device. Then I rooted my s3 with cf something root kit and then my signals were gone. I have the international version so my phone should be factory unlocked so I thought I should install cm anyway cuz that might solve the problem. But it didn't. I really like cyanogenmod and don't want to revert back to crappy touchwizz . The problem was there before installing cm9 but after rooting my phone.
Please any help. I really need to use my phone.
Thnx
Muzammil
Click to expand...
Click to collapse
You should reinstall everything from the scratch mate, so revert your device at stock (using odin), then flash the correct [email protected] kernel and finally if everything is working flash cm9.
Edit: if your device is locked i think you can unlock it easily, search in the forum you can find out everything you need for this.
Sent from my GT-I9300 eating Jelly Bean

sorry mate ..
i am a complete noob, i dont know how to revert to stock rom, stock recovery and unroot my device

Download original firmware for your phone from sammobiles and flash it using odin. If is good then root it again and flash cm9.
Sent from my GT-I9300 using xda app-developers app

Arsaw said:
Download original firmware for your phone from sammobiles and flash it using odin. If is good then root it again and flash cm9.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Okay,
I have downloaded my firmware file but i noticed that i need three tar files for the flashing precess through ODIN but i downloaded only 1 file *.tar.md5
no clue now what to do
Update: I tried to extract the file using splitfus but it didnt work.
Update 2: Okay now I have Installed my stock firmware and it seems to be working now.. But should I risk installing the CM9 again ?

muxammle said:
Okay,
I have downloaded my firmware file but i noticed that i need three tar files for the flashing precess through ODIN but i downloaded only 1 file *.tar.md5
no clue now what to do
Update: I tried to extract the file using splitfus but it didnt work.
Click to expand...
Click to collapse
- launch Odin
- load that ONE FILE on PDA section
- put your phone in download mode (volume down+home+power)
- connect the phone to computer, wait for drivers to be installed and ODIN to find your phone (you will see a message in Odin)
- click start
- don't touch the phone until it's done. It will boot alone
Also, it might be a good idea to wipe data / reset to factory before and after flash.
You could find all this info with google ....
On the topic, I have a similar issue. My phone was factory unlocked , and got locked after flashing latest stock firmware. Downgrading didn't solved anything. I am searching the forums right now, but it seems like all fixes are dated.
If anyone could point me in the right direction, it will be appreciated.
Thx

Hey rsndetre,
Thnx for the post, but sorry I already did that and it worked ..
Here are the method I used to get back my device back to normal and got my sim card working and again reinstalled cm9
1- Downloaded Toolkit from http://forum.xda-developers.com/showthread.php?t=1703488
2- Flashed Stock Boot Image
3- Flashed Stock Recovery Mode
4- Downloaded stock firmware from http://fus.nanzen.se/
5- Flashed stock firmware using Odin (your method above)
6- Rooted the device again (using odin and CF-Root-SGS3-v6.4)
7- Downloaded and placed cm9 and google apps package in SDCARD
8- Installed Rom Manager from Play Store.
9- Downloaded and Installed ClockWorkMod from rom manager and booted to recovery mode using RomManager
10- Then factory resetted, formatted the cache and installed the CM9 and GAPPS V11
Then my phone was good to go.
My phone is up and running, thanks rsndetre, Arsaw and TecQuality for your replies. I appreciate your time
Thanks
Muzammil Ahmed.

Related

[Rom] S5830JPKP9 new Arabic rom

from samfirmware.com
http://hotfile.com/dl/128278611/f27cb8f/S5830JPKP9.rar.html
pass : samfirmware.com
About time... for a bit I thought this will never come!
Can I install CF-Root 3.7 B80 on this directly from CWM 4.0.0.9?
If not, what shall I do before?
Noorish said:
About time... for a bit I thought this will never come!
Can I install CF-Root 3.7 B80 on this directly from CWM 4.0.0.9?
If not, what shall I do before?
Click to expand...
Click to collapse
U can try a simple dirty trick to make cfroot works with any rom(or maybe just gingerbread) without loosing wifi capability. Rename ar6000.ko file in /system/wifi as ar6000.ko.bak using any filemanager that have root capability(obviously u need to be rooted before attempted this). Then get ur hands on ar6000.ko file from kpn and put it in the same folder as previous renamed ar6000.ko file, give it proper permission and flash cfroot b80. This trick works with zckpa china fw, so in theory it should work on other rom too. Btw dont shoot me if this doesnt work, im just helping
Sent from your phone
I kept my self really busy, let me tell ya what I did so far:
1- Flashed the new FW with Odin, things are smooth there nothing major.
2- Installed CWM 4.0.0.9, smooth and easy.
3- Installed CF-Room 3.7 b78 and then b80, had weird stuff going back there but it eventually worked, I lost the boot audio on the Samsung logo.
4- Installed EXT4 converter, no problem.
5- Started converting from RFS to EXT4. first time it finished converting but refused to boot correctly, I re-did all the above and started to convert again, now it refused to convert the /system, saying I don't have enough space for the restore, it kept failing here until I freed some space by using Titanium Backup and removed crapware, tried again and now I have EXT4 instead of RFS.
6- Enabled Apps2SD using the Tweak Manager DT: Auto Start.
7- Flashed the Apps2SD GUI, the phone rebooted a couple of times but it didn't install, couldn't see the icon of it.
And now, I must have some sleep! Good night ya all
i have gingerbread 2.3.4 on my ace so can i apply this rom
i get 1250 in quadrant without any mods . just after i flashed . amazing Rom .
an0nym0us_ said:
U can try a simple dirty trick to make cfroot works with any rom(or maybe just gingerbread) without loosing wifi capability. Rename ar6000.ko file in /system/wifi as ar6000.ko.bak using any filemanager that have root capability(obviously u need to be rooted before attempted this). Then get ur hands on ar6000.ko file from kpn and put it in the same folder as previous renamed ar6000.ko file, give it proper permission and flash cfroot b80. This trick works with zckpa china fw, so in theory it should work on other rom too. Btw dont shoot me if this doesnt work, im just helping
Sent from your phone
Click to expand...
Click to collapse
CF-Root b80 already have this solution.
To install CF-Root to Gingerbread ROM: flash CF-Root recovery b79 using Samsung default recovery. Reboot into CWM recovery, flash CF-Root boot b80.
Indonesia offical Gingerbread update: DXKP9
If ketut is happy, then we all should be happy too, when do you think you can start working on it?
I so far had around 3 or 4 SOD's, not sure they're caused by the ROM it self or the stuff mentioned before that I installed on it, the ROM also randomly reboot it self while working, it crashed and rebooted while I was in the middle of a phone call :/, this only happened after installing the C-fr 7.3 b80.
Blah...
Sent from my GT-S5830 using XDA App
Finally it is out!
Any method or results about Root, Deodex and ClockWorkMod ?
Finally it is out!
Any method or results about Root, Deodex and ClockWorkMod ?
Finally it is out!
Any method or results about Root, Deodex and ClockWorkMod?
can you provide the kpn wifi file..am using the china firmware too and i want cf root
i have 2.2.1 official arabic rom...and i have my device rooted...
so i must unroot to flash this 2.3.3 rom?
can Odin software flash the new rom ..without unrooting?
Malkemid said:
i have 2.2.1 official arabic rom...and i have my device rooted...
so i must unroot to flash this 2.3.3 rom?
can Odin software flash the new rom ..without unrooting?
Click to expand...
Click to collapse
Just install the new rom. every thing will be OK
Hello every one ....
i just finished download the (S5830JPKP9) from SamFirmware Site, but when i Extract this
File i can't find The MODEM File.
Only :
1-APBOOT_S5830JPKP9_CL457554_REV03_user_low_true.tar
2-CODE_S5830JPKP9_CL457554_REV03_user_low_true.tar
3-GT-S5830-MULTI-CSC-OJPKP3.tar
and (Cooper_v1.0) File.
Can any one Help me Please...
Now i Have The Official (S5830JPKA7) Arabic ROM.
o_afifi said:
Hello every one ....
i just finished download the (S5830JPKP9) from SamFirmware Site, but when i Extract this
File i can't find The MODEM File.
Only :
1-APBOOT_S5830JPKP9_CL457554_REV03_user_low_true.tar
2-CODE_S5830JPKP9_CL457554_REV03_user_low_true.tar
3-GT-S5830-MULTI-CSC-OJPKP3.tar
and (Cooper_v1.0) File.
Can any one Help me Please...
Now i Have The Official (S5830JPKA7) Arabic ROM.
Click to expand...
Click to collapse
If I were you, I'd use Kies to do the upgrade, you have the official ROM installed, why not use the official tool too?
If you don't care about the official tool then simply map each file type to the right section in Odin, you can still perform the upgrade without having the modem file.
ketut.kumajaya said:
CF-Root b80 already have this solution.
To install CF-Root to Gingerbread ROM: flash CF-Root recovery b79 using Samsung default recovery. Reboot into CWM recovery, flash CF-Root boot b80.
Click to expand...
Click to collapse
link to this please...
Noorish said:
If I were you, I'd use Kies to do the upgrade, you have the official ROM installed, why not use the official tool too?
If you don't care about the official tool then simply map each file type to the right section in Odin, you can still perform the upgrade without having the modem file.
Click to expand...
Click to collapse
i've been trying or two days to upgrade through Kies but it wouldn't work.
i read on the samfirmware site that someone bricked his phone when he lashed without the MODEM file.
can any one make me CRT OFF Animation for this rom i trid but not work with me

[Q] rooted device can't install new ROM

Hello everybody,
First I'd like to thank to community for the hard work. I v read a countless amount of pages of this forum and I can't even imagine the time people spent helping on issues or writing tutorials.
So thank you if you re up to spend few minutes on my specific case (and sorry for the bad english).
Here is my device and the different version of kernel ...
1/ Rooting my device (tutorial in french translated from xda)
http://www.cnetfrance.fr/produits/guide-rooter-son-galaxy-s2-39763841.htm
S-Root version used: http://forum.xda-developers.com/showthread.php?t=1125414
Everything went pretty well when I rooted the GS2. I got the Superuser app so i figure it's ok.
I just used a modified kernel found on xda who was corresponding the my base band version (just the PDA in Odin).
2/ Installing a new ROM (Cyanogenmod by Rom Manager)
I followed : http://www.redmondpie.com/install-cm7-on-galaxy-s2-using-rom-manager-how-to-tutorial/ and http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_II:_Full_Update_Guide (official guide) using Rom Manager premium.
When i tried to reboot in Recovery (manually or with Rom Manager), i can't find the "Install the zip" option, I have 4 available: "Update from the zip", the 2 wiping/delete options and the reboot.
So obviously if i try to wipe files, wipe the cache then to update with the zip I have the following Error:
E: failed to verify whole-file signature
Do you have any idea what went wrong in the process ?
Should i flash the phone withOdin and change my base band version to another one ?
For info, I did the Permission Fix option in Rom Manager too. Didnt help.
Thanks a lot.
U need clockworkmod instaled first..
Sent from my GT-S5570 using xda premium
sgt_ray said:
Do you have any idea what went wrong in the process ?
Click to expand...
Click to collapse
You didn't install ClockworkMod Recovery.
Thanks for theses answers but I think I installed it with Rom Manager and i flashed it to the last version.
(joined file 1 : cwm rom manager.jpg)
When i reboot in recovery mode here is the only options available (and it's the problem i pointed out) :
(joined file 2 : 20111125_13221022.jpg)
Maybe a problem with my SD card ?
sgt_ray said:
but I think I installed it with Rom Manager and i flashed it to the last version.
Click to expand...
Click to collapse
As we've already said, you haven't installed CWM Recovery. You see at the top of your second photo where it says "Android system recovery (3e)"? That's stock recovery.
you can't install CWM recovery thru ROM manager.
just flash the CF Root Kernel for KI4 thru ODIN , you will have CWM recovery.
Hmm I understand about the CWM version I'm booting with, but as you can see on the first capture, my kernel version is a modified one i got after using Odin (puting this Kernel : GT-I9100_XXKI4_insecure.tar from http://forum.xda-developers.com/showthread.php?t=1101671).
I got the root access by S2 Root.
Ok I think I installed only the Kernel and not CF Root available here : http://forum.xda-developers.com/showthread.php?t=1103399
I ll try to redo Odin and stuff and let you know if I'm still alive.
So it's not great right now. I have installed CF Root with Odin, so I had CWM on my phone (I could see the application). Then after reboot with CWM Recovery and installing Cyanogenmod, the phone doesnt want to start anymore.....
I tried to apply the insecure kernel again with Odin but still impossible to download. I'm stuck on the screen with the yellow sign and written Galaxy S2.
HALP !!
I just tried to put back the official firware version : http://forum.xda-developers.com/showthread.php?t=1075278 and put it in my phone with Odin.
Ok, I dont have the yellow sign anywore but the phone is still stuck on the boot screen (where it's written Samsung GALAXY s II)...
What should I try ?
I'm still able to boot with CWM recovery but I didn't make any backup and nothing work.
Do you think the phone is dead ?
5 posts in a row?
So, just to clarify, you've tried to install CM7, which amongst other things tells you to do a nandroid backup, and also to flash twice in succession. Did you do either of these things? The instructions are there to be followed, don't just ignore them.
Ok my bad I didn't backup anything because I had no data to backup. This was maybe a bad move...
Anyway, I tried to flash it twice yes. Right now, i'm working with a modified Kernel (with CF Root), and booting in CWM Recovery. When I want to flash again by installing from the .zip I get a Satus 7 Error.
In CWM, every advanced options are apparently available but I dont know anything about them.
And just so you know, on my SD Card i have 1 update.zip and the update-cm-7.1.0-Galaxys2.... .zip from Cyanogen.
sgt_ray said:
Ok my bad I didn't backup anything because I had no data to backup. This was maybe a bad move...
Anyway, I tried to flash it twice yes. Right now, i'm working with a modified Kernel (with CF Root), and booting in CWM Recovery. When I want to flash again by installing from the .zip I get a Satus 7 Error.
In CWM, every advanced options are apparently available but I dont know anything about them.
And just so you know, on my SD Card i have 1 update.zip and the update-cm-7.1.0-Galaxys2.... .zip from Cyanogen.
Click to expand...
Click to collapse
Flash a stock rom with Odin and then root your phone again. Start reading and follow procedures when you want to flash custom roms again .See Intratechs`s thread for a stock rom
Thanks for your reply.
I did it, it didn't work, I mean i could flash with Odin but the reboot doesn't work : the start screen appeared without the yellow sign, but it's stuck on it.
--- update
FYI, I installed Rom Manager yesterday, it way interact in a bad way with CWM Recovery.
For now i can mount USB by CWM Recovery but cannot do anything else.
If you have a method to clean completely the phone ? Maybe the bootloader is broken...
sgt_ray said:
I just tried to put back the official firware version : http://forum.xda-developers.com/showthread.php?t=1075278 and put it in my phone with Odin.
Ok, I dont have the yellow sign anywore but the phone is still stuck on the boot screen (where it's written Samsung GALAXY s II)...
What should I try ?
I'm still able to boot with CWM recovery but I didn't make any backup and nothing work.
Click to expand...
Click to collapse
Wipe data and cache after flashing..
Sent from my GT-S5570 using xda premium
I did it. 20 times .
Maybe I should re partition my SD card...
--- update ---
I re partitionned my SD Card with Odin and tried to install a new stock ROM. Everything pass with Odin but to finalize the set up (while reboot), I got some errors and still the same problem during the boot. It's stuck !
I installed a insecure Kernel so I can access CWM Recovery but still stuck and now I can't mount anything .
Sorry to post again...
Finally I ordered a USB jig in case of...
I found this solution : http://forum.xda-developers.com/showpost.php?p=16902269&postcount=8
May try it this we.
sgt_ray said:
Sorry to post again...
Finally I ordered a USB jig in case of...
I found this solution : http://forum.xda-developers.com/showpost.php?p=16902269&postcount=8
May try it this we.
Click to expand...
Click to collapse
Good luck...
Sent from my GT-S5570 using xda premium

Root from sd?

hi there
my USB port is broken
i want to root my phone via sd card, it is possible ?
iam on orange UK 2.3.3 BVKG3
i just need to root it
cheers
If you first update to ICS somehow (OTA?), yes.
Although i seen something similar to that (flash a .zip file using stock recovery to gain root) i haven't seen someone around s2 forum make a .zip like that. I have seen low end devices gain root by flashing .zip files through stock recovery like Galaxy Ace, Optimus Me and Galaxy Y.
Sent from my GT-I9100 using xda premium
Yes it can be done. I've done it myself on SGSII and it works fine. See this thread for details:
http://forum.xda-developers.com/showthread.php?t=1501719
Mr Anderson said:
Yes it can be done. I've done it myself on SGSII and it works fine. See this thread for details:
http://forum.xda-developers.com/showthread.php?t=1501719
Click to expand...
Click to collapse
He's still on GB. That only works for ICS.
use mobile odin to flash kernel and firmware
neerajganga said:
use mobile odin to flash kernel and firmware
Click to expand...
Click to collapse
Doesn't Mobile Odin require root in the first place to run? His phone is currently unrooted, unless that status has changed.
gordonko said:
hi there
my USB port is broken
i want to root my phone via sd card, it is possible ?
iam on orange UK 2.3.3 BVKG3
i just need to root it
cheers
Click to expand...
Click to collapse
I do have a theory... but it will involve you upgrading to ICS while you're at it. You'll also have to wipe your device, which will remove all your apps/contacts/etc, but should leave all your pictures/movies/music/etc. I am not sure if it will work or not, as I haven't actually tried it myself.
You'll need an external SD card for this.
- Download CWM Recovery for the Galaxy S2 from the ClockworkMod website and put in on your external SD card.
- Download one of wanam's stock ICS ROMs that are CWM flashable from his thread and put it on your external SD card.
- reboot to recovery
- do a full wipe (data/factory reset)
- choose "apply update from external storage"
- find and select the recovery image downloaded in the first step, and wait for CWM recovery to appear
- choose "install from sdcard"
- find and select the ROM you downloaded in the second step
Once this last step is done, I believe you'll need to reboot. The advantage of this is though all the ROMs in wanam's thread are all stock, they are ALSO rooted. So you'll both upgrade to ICS and root your device simultaneously.
Again, this is a theory, but I don't see why this wouldn't work. (of course, someone please point out anything I didn't think of that would prevent this from working the way I envisioned it)
not working for me nothing, as CWM zip file cannot be instaled from stock recovery
there is signature problem
i already downloaded touch version too without luck
:crying:
gordonko said:
not working for me nothing, as CWM zip file cannot be instaled from stock recovery
there is signature problem
i already downloaded touch version too without luck
:crying:
Click to expand...
Click to collapse
Well, it was only a theory. Sorry.

HELP!!!!!! i9100P Stuck At Boot Screen With Yellow Triangle!!

Hi all,
I have a i9100P (with NFC) and it is stuck at the boot screen with the yellow triangle after I installed CWM using this method here:
galaxys2root (DOT) com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/
I can still enter Download mode and even the installed CWM, but i cannot boot into android, its just stuck on the screen
I have searched on the internet for a solution, and i cannot find a solution for this
would installing a new ROM via an SD card work? What shall i do?
HELP me PLS!!
thanks in advance!!!!
Carlover1998 said:
Hi all,
I have a i9100P (with NFC) and it is stuck at the boot screen with the yellow triangle after I installed CWM using this method here:
galaxys2root (DOT) com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/
I can still enter Download mode and even the installed CWM, but i cannot boot into android, its just stuck on the screen
I have searched on the internet for a solution, and i cannot find a solution for this
would installing a new ROM via an SD card work? What shall i do?
HELP me PLS!!
thanks in advance!!!!
Click to expand...
Click to collapse
Quote taken from site:
Galaxy S2 Reference
You will need a rooted Galaxy S2 to install all ROM/kernels.
NOTE: PLEASE ONLY INSTALL ROMS INTENDED FOR YOUR VERSION OF Galaxy S2! Otherwise you WILL BRICK YOUR PHONE and I will not be responsible! ALL ROMs on this site are ONLY for Verizon Galaxy S2!
First time to rooting and custom ROMs?
Please see our FAQ for your Galaxy S2 model FIRST!!!:
Click to expand...
Click to collapse
I wouldn't have tried this as your phone is i9100P, although I know the difference isn't that big.
Also, was your phone rooted? It had to have been rooted beforehand.
oddlyshapedstickman said:
Quote taken from site:
I wouldn't have tried this as your phone is i9100P, although I know the difference isn't that big.
Also, was your phone rooted? It had to have been rooted beforehand.
Click to expand...
Click to collapse
Hi, yes it was rooted prior to this, but i thought the only difference was that the P version had NFC - but now it seems I am stuck at the boot screen - any ideas? I would appreciate it a lot!
Flash your stock ROM and check it it works.
Stileth said:
Flash your stock ROM and check it it works.
Click to expand...
Click to collapse
Hi, thanks for the reply - i will try flashing it after i finish downloading it. I presume I will have to do the usual wipe data, clear cache etc?
"I searched all over the internet and couldnt find a solution"
Biggest load of crap Ive read on here.
Sent from my GT-I9100 using xda premium
Carlover1998 said:
Hi, thanks for the reply - i will try flashing it after i finish downloading it. I presume I will have to do the usual wipe data, clear cache etc?
Click to expand...
Click to collapse
Yes, that should help. Btw what version you are downloading? 4.0.3 or 4.0.4?
Stileth said:
Yes, that should help. Btw what version you are downloading? 4.0.3 or 4.0.4?
Click to expand...
Click to collapse
I am downloading 4.0.3 from here: devsrom4android.blogspot (DOT)co (DOT) uk/2012/06/i9100pxxlph-o2-uk-samsung-galaxy-s2-gt.html
4.0.3 is what I previously had, and I believe that was the exact firmware I had on the phone (o2 NFC version)
Carlover1998 said:
I am downloading 4.0.3 from here: devsrom4android.blogspot (DOT)co (DOT) uk/2012/06/i9100pxxlph-o2-uk-samsung-galaxy-s2-gt.html
4.0.3 is what I previously had, and I believe that was the exact firmware I had on the phone (o2 NFC version)
Click to expand...
Click to collapse
That's your problem. You were on 4.0.3, which is ICS.
The instructions at galaxys2root.com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/ don't specify, but they are for Gingerbread ONLY. The recovery kernel contained within that zip package is ClockworkMod Recovery 4.0.1.4, which is for Gingerbread.
This thread (http://forum.xda-developers.com/showthread.php?t=1118693) is the updated version of that recovery kernel for ICS.
You don't have to flash the full firmware, just flash a kernel that is meant to work with ICS and you should be fine.
ctomgee said:
That's your problem. You were on 4.0.3, which is ICS.
The instructions at galaxys2root.com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/ don't specify, but they are for Gingerbread ONLY. The recovery kernel contained within that zip package is ClockworkMod Recovery 4.0.1.4, which is for Gingerbread.
This thread (http://forum.xda-developers.com/showthread.php?t=1118693) is the updated version of that recovery kernel for ICS.
You don't have to flash the full firmware, just flash a kernel that is meant to work with ICS and you should be fine.
Click to expand...
Click to collapse
Thanks for the advice - but i already have the stock ROM on an SD card so i think i will flash this. Problem is i cannot get CWM to read from the external SD card, so i cannot locate the zip and install it - help?
EDIT: if i install the kernel you gave me the link to ([KERNEL][ICS] ClockworkMod Recovery 5.5.0.4) , will it remove the root access i had?
EDIT 2: I have just flashed the kernel via odin, and it finally got past the screen with the yellow triangle! However, it is now stuck on the second screen which shows the 'S' logo with the words 'Samsung Galaxy SII' under it. Any more ideas?
Carlover1998 said:
Thanks for the advice - but i already have the stock ROM on an SD card so i think i will flash this. Problem is i cannot get CWM to read from the external SD card, so i cannot locate the zip and install it - help?
EDIT: if i install the kernel you gave me the link to ([KERNEL][ICS] ClockworkMod Recovery 5.5.0.4) , will it remove the root access i had?
EDIT 2: I have just flashed the kernel via odin, and it finally got past the screen with the yellow triangle! However, it is now stuck on the second screen which shows the 'S' logo with the words 'Samsung Galaxy SII' under it. Any more ideas?
Click to expand...
Click to collapse
Can you boot to recovery? If so, you can try a factory reset/wipe data. You'll lose all your data, (not counting pictures/media) but at this point, do you have anything to lose?
ctomgee said:
Can you boot to recovery? If so, you can try a factory reset/wipe data. You'll lose all your data, (not counting pictures/media) but at this point, do you have anything to lose?
Click to expand...
Click to collapse
I just tried that, i can boot into the new cwm - have nothing to lose since i've only had it for about 3 days - however even after the wipe data, cache and dalvik it is still stuck on the 'S' screen now
Carlover1998 said:
I just tried that, i can boot into the new cwm - have nothing to lose since i've only had it for about 3 days - however even after the wipe data, cache and dalvik it is still stuck on the 'S' screen now
Click to expand...
Click to collapse
Well, now I'd say you need to flash a full firmware. You said you downloaded I9100PXXLPH from here? Should work. But you'll no longer be rooted, and you won't have CWM recovery.
How did you get into this in the first place? You wanted CWM recovery?
ctomgee said:
Well, now I'd say you need to flash a full firmware. You said you downloaded I9100PXXLPH from here? Should work. But you'll no longer be rooted, and you won't have CWM recovery.
How did you get into this in the first place? You wanted CWM recovery?
Click to expand...
Click to collapse
I will be sure to try that, and basically earlier today i rooted it successfully, and then i had to get CWM onto it so i could start flashing new ROMs etc, and i tried installing CWM via that method that has now caused all of this
Never the less i will try your suggestion, so should i basically mount usb from CWM, then copy the firmware over to the phone, unmount, and then wipe, and then flash it finally?
EDIT: it wont allow me to mount USB in CWM
can i just flash the ZIP using odin in download mode, or does it have to be a .tar file?
Carlover1998 said:
I will be sure to try that, and basically earlier today i rooted it successfully, and then i had to get CWM onto it so i could start flashing new ROMs etc, and i tried installing CWM via that method that has now caused all of this
Never the less i will try your suggestion, so should i basically mount usb from CWM, then copy the firmware over to the phone, unmount, and then wipe, and then flash it finally?
Click to expand...
Click to collapse
No. That download is for a package that must be flashed while the phone is in download mode. That will require you to use a computer, and a flashing tool, such as Odin or Heimdall.
ctomgee said:
No. That download is for a package that must be flashed while the phone is in download mode. That will require you to use a computer, and a flashing tool, such as Odin or Heimdall.
Click to expand...
Click to collapse
How would I go about flashing it in download mode, i really have no idea as I don't think you can flash zip files in odin, forgive me for all of the questions I really appreciate your help!
EDIT: I have unzipped the file and hooray lies in it the .tar.md5 file! I am in the middle of flashing this and will report back on results
Thanks a lot guys!!
THANKS GUYS FOR ALL OF YOUR HELP, my SII is now working fully again! Cheers to all that helped, flashing the stock firmware worked with wipe/cache
Can't thank you enough!
Last thing if you don't mind, i want to root it again using this: (http://forum.xda-developers.com/showthread.php?t=1321582)
Now after that, how can i install CWM without getting into the mess i got into today? cheers!
Nope, I think that's for GB. For easy root use method 1 from 1st guide in my signature.
Stileth said:
Nope, I think that's for GB. For easy root use method 1 from 1st guide in my signature.
Click to expand...
Click to collapse
But it appears that this will not give you permanent CWM recovery. Which is what I think he wants.
ctomgee said:
But it appears that this will not give you permanent CWM recovery. Which is what I think he wants.
Click to expand...
Click to collapse
Well I think Chainfire's CF-Root kernels (http://forum.xda-developers.com/showthread.php?t=1103399) are not for i9100P, so not sure if he can achieve permanent CWM recovery. Anyway if he don't plan to flash every hour new ROM he should be fine with latest temporary CWM 6: http://forum.xda-developers.com/showthread.php?t=1840223 although will ask Phil about compatibility.

Phone not turning on after factory reset

Hi all,
I've been having a few issues with my S2 (Randomly resetting, freezing, etc) - so I decided to do a factory reset - but it hasn't worked.
When I turn my phone on, it wont go past the galaxy logo. I've tried holding down VOLUME UP, POWER, and HOME - but it doesn't boot it into recovery mode.
I've downloaded odin (the phone is rooted) and was told to download a new ROM and then use the PDA button on odin. But the only file type it expects is MD5, tar and SMD. Whenever I download a ROM, I just get a ZIP?
I'm probably being stupid. Could someone point me in the right direction? I don't care if I lose data, I just want the phone working.
Wazza26 said:
Hi all,
I've been having a few issues with my S2 (Randomly resetting, freezing, etc) - so I decided to do a factory reset - but it hasn't worked.
When I turn my phone on, it wont go past the galaxy logo. I've tried holding down VOLUME UP, POWER, and HOME - but it doesn't boot it into recovery mode.
I've downloaded odin (the phone is rooted) and was told to download a new ROM and then use the PDA button on odin. But the only file type it expects is MD5, tar and SMD. Whenever I download a ROM, I just get a ZIP?
I'm probably being stupid. Could someone point me in the right direction? I don't care if I lose data, I just want the phone working.
Click to expand...
Click to collapse
What ROM do you want to flash?
If it's a stock ROM, then extract the zip file and flash the contained tar/md5 file with Odin.
If it is a custom ROM and only provided as CWM-flashable zip file, then use a stock ROM to flash first and flash the custom ROM afterwards, when everything works again.
Here you can get the latest stock ROMs => http://forum.xda-developers.com/showthread.php?t=1544487, or pre-rooted stock ROMs from here => http://forum.xda-developers.com/showthread.php?t=1608071, or use Check Fus Downloader from here => http://fus.nanzen.se/ to check for the latest officiallly released firmware versions for your phone in your region and download it directly from Samsung servers.
It_ler said:
What ROM do you want to flash?
If it's a stock ROM, then extract the zip file and flash the contained tar/md5 file with Odin.
If it is a custom ROM and only provided as CWM-flashable zip file, then use a stock ROM to flash first and flash the custom ROM afterwards, when everything works again.
Here you can get the latest stock ROMs => http://forum.xda-developers.com/showthread.php?t=1544487, or pre-rooted stock ROMs from here => http://forum.xda-developers.com/showthread.php?t=1608071, or use Check Fus Downloader from here => http://fus.nanzen.se/ to check for the latest officiallly released firmware versions for your phone in your region and download it directly from Samsung servers.
Click to expand...
Click to collapse
Hi,
Thanks for the reply. I don't care which ROM I use - As long as I get the phone working again. I did download 7comp ROM but I couldn't find any .tar files?
I also converted the ZIP to a TAR but odin isn't picking it up ?!
OK - I've downloaded and installed the latest stock ROM you posted.
It seems to have installed, but doesn't go past the splash screen which says samsung galaxy Sii
Any ideas?
[EDIT] - Phone fixed. I was able to load it into recovery mode and cleared cache. woo
Well done ...now try to go on recovery mode ...if should be able to go....do full wipe...then clear delvik cache...then advance- fix permission ..
Then reboot system ....you are done...
Don't forget to say thanks..
Sent from my GT-I9100 using xda premium
Attempted to root the phone but it didn't work.
I followed a set of instructions, and was asked to wait for the phone to reboot. It now has the "!" rooted icon but won't go past the rooted screen.
System restore and clearing cache doesn't set it back to factory default. Any ideas?
Wazza26 said:
Attempted to root the phone but it didn't work.
I followed a set of instructions, and was asked to wait for the phone to reboot. It now has the "!" rooted icon but won't go past the rooted screen.
System restore and clearing cache doesn't set it back to factory default. Any ideas?
Click to expand...
Click to collapse
May i know what u did???
xDa_nightfury said:
May i know what u did???
Click to expand...
Click to collapse
Sorry for late reply. I followed a video on youtube showing you how to root the phone. It looked succesfull as the "!" did appear, but it wouldn't go past that.
So I rolled it back using the original ROM and have given up on rooting it. It's a shame as I really liked Jelly Bean
Wazza26 said:
Sorry for late reply. I followed a video on youtube showing you how to root the phone. It looked succesfull as the "!" did appear, but it wouldn't go past that.
So I rolled it back using the original ROM and have given up on rooting it. It's a shame as I really liked Jelly Bean
Click to expand...
Click to collapse
to root ur phone, just dwnld the .tar file of Siyah v4.1.5 fro the link below, then put ur phone into Dwnld mode and connect to ODIN in ur PC and flash by putting the siyah kernel file(.tar) in PDA section, ur phone will be rooted
http://www.gokhanmoral.com/gm/2012/09/08/siyahkernel-s2-v4-1/
PS- do see that u dwnld the file meant to flash by ODIN ie Download tar (for Odin)
Just flash a siyah v.4 rooted kernel through odin.

Categories

Resources