stuck in sony ericsson screen - XPERIA X10 Q&A, Help & Troubleshooting

hey guys please some help
i wanted to install a custom rom
now im stuck
i did this
rooted via flastool
cwm5 via flash tool
i have 2.1 at the moment
after that to install the rom i was advice to install the kernel v6
i did
after that i install the recovery v6 for gb
i did
booted in recovery and installed the rom
myfirstrom.zip
and now im stuck
what can i do to fix this
thanks

---

Wrong thread buddy
Sent from my X10i using xda premium

---

elmanortega said:
hey guys please some help
i wanted to install a custom rom
now im stuck
i did this
rooted via flastool
cwm5 via flash tool
i have 2.1 at the moment
after that to install the rom i was advice to install the kernel v6
i did
after that i install the recovery v6 for gb
i did
booted in recovery and installed the rom
myfirstrom.zip
and now im stuck
what can i do to fix this
thanks
Click to expand...
Click to collapse
This tread should be in Q&A not in DEV.
Anyway do U have bootloader unlocked?

---

That rom is a 2.3 rom and you need to have and unlocked bootloader. You need to have 2.3 on your device first which would you would find in my signature below. So skip through the tread and find 2.3 Download it and flash it and try the rom again.
Sent from my X10i

---

Dude u r in 2.1 now. It has a baseband of .49 or .54. GB needs a baseband of .71. So the only option is first u download a pre-rooted firmware image and flash it via flashtool. U will boot into GB. Then unlock bootloader using Laser's method and install custom kernel like DoomKernel.
Follow this method
[RECOVERY image] {v2} X10 GB 3.0.1.G.0.75 [Prerooted + Fixed xRecovery] to insatll the prerooted firmware using flashtool.
Unlock bootloader using this steps from
[HOW-TO]UNLOCK bootloader for X10
Then flash DoomKernel from this link
[KERNEL][X10] DooMKernel [UNLOCKED BOOTLOADERS]{Rel:v06}[Dt:10/Jan][FW3.0.1.G.0.75] and boot up into stock rom or the previous GB rom u r using.
For Stock based roms, DoomKernel is simply the best.
For CM7 based roms, use FXP 130 kernel provided here FXP 130 and
For CM9 based roms, use FXP 132 kernel for better performance which u can download in FXP CM9 Thread.
---------- Post added at 11:10 AM ---------- Previous post was at 11:08 AM ----------
kingstonxl said:
This tread should be in Q&A not in DEV.
Anyway do U have bootloader unlocked?
Click to expand...
Click to collapse
He hasnt even updated to GB.. Still in stock 2.1.

---

Don't scare the guy with laser's method for now he is starting out small like we at one time were(im still growing) , the latest version of flashtools could do it easy. Its all in my signature if you tries it.
Sent from my X10i

---

brenty108 said:
Don't scare the guy with laser's method for now he is starting out small like we at one time were(im still growing) , the latest version of flashtools could do it easy. Its all in my signature if you tries it.
Sent from my X10i
Click to expand...
Click to collapse
Sry i didn kw ur post.. Let him do the way he think is best

---

thanks guys
im downloading the 2.1 ans 2.3 roms
now how do i install them?
i can access xrecovery
but when i connect to flashtool i dont have all the options
actually none
the devices is detected but thats it
can a stock rom be install using xrecovery?

---

elmanortega said:
thanks guys
im downloading the 2.1 ans 2.3 roms
now how do i install them?
i can access xrecovery
but when i connect to flashtool i dont have all the options
actually none
the devices is detected but thats it
can a stock rom be install using xrecovery?
Click to expand...
Click to collapse
dude flashing option works only when u r in download mode. i think u have 2.3.4. and stock kernel. if u want custom roms u have to unlock bootloader shown u n the post i provided

---

a2441918 said:
dude flashing option works only when u r in download mode. i think u have 2.3.4. and stock kernel. if u want custom roms u have to unlock bootloader shown u n the post i provided
Click to expand...
Click to collapse
thanks
Originally Posted by Androxyde
X10i Generic
Generic version 2.3.3 build 3.0.1.G.0.75 (MD5: 36F52BAA3556CDD7E56383614C01E5D6)
this one is no longer available

---

Thread Moved​
You should Know better, your post count indicates you have been active, so should be fully aware of the rules​

---

after i connect in flash mode
it stays for a few secs and reboots into the sse screen
is there a way to install the oem rom
in xrecovery?
or a 2.1 rom in recovery?

---

if i install a 2.1 custom rom
will that help??

---

im connected to flashtool in flash mode but nothing no options
what do i do now?

---

ok i finally go it to
where it was suppose to be to install formware
and this is where i am

---

Did you click fastboot? Click flashmode as x10 doesn't fastboot lol
Sent from my Xperia X10 using xda premium

---

thanks im good now
im about to install the ics rom
from
{rom}{6mp WORKING }XPERIA S ICS - CM9{14/8/12} {rom}
but i dont know wich kernel to install
i will write here what i did
so other can have an easy install
thanks to brenty108 for the help

---

If that rom is in ftf format
Open with 7zip or winrar
Look for kernel.sin
And place it in a folder
In flashtool create kernel
Point it to the folder containing kernel.sin
You should then be able to place your created kernel into firmware folder and flash it
I haven't had much experience with those roms so it's just a suggestion
Sent from my Xperia X10 using xda premium

---

elmanortega said:
thanks im good now
im about to install the ics rom
from
{rom}{6mp WORKING }XPERIA S ICS - CM9{14/8/12} {rom}
but i dont know wich kernel to install
i will write here what i did
so other can have an easy install
thanks to brenty108 for the help
Click to expand...
Click to collapse
You need to install a kernel called fxp132 from team fxp for ICS ROM to work... see my other posts in Q&A.. I have uploaded it somewhere.. you should be able to access through my profile->-> posts.
Sent from my Transformer TF101 using xda app-developers app

---

elmanortega said:
thanks im good now
im about to install the ics rom
from
{rom}{6mp WORKING }XPERIA S ICS - CM9{14/8/12} {rom}
but i dont know wich kernel to install
i will write here what i did
so other can have an easy install
thanks to brenty108 for the help
Click to expand...
Click to collapse
hey friend, you have downloaded the xperia s ics by vassishta but you dont know what kernel to be used?, dont be so lazy reading all the stuff in that thread (i mean xperia s ics), fxp 132 kernel is included there and instructions on how to flash the rom, hope i helped you, please press thanks button for me, pressing it is just an easy thing.. cheers.. :good: