Soft Brick - Galaxy S III Q&A, Help & Troubleshooting

HI guys i installed Wanamalite DLH4 Jelly bean and then went back to stock I9300XXBLG8 stock. Installed separate CSC, MODEM and Kernel files but still it reebots and shows the samsung animation and stays there and won't get past. please Help me guys. Thanks.

varunkumars said:
HI guys i installed Wanamalite DLH4 Jelly bean and then went back to stock I9300XXBLG8 stock. Installed separate CSC, MODEM and Kernel files but still i reebots and shows the samsung animation and stays there and won't get past. Help me guys please. Thanks.
Click to expand...
Click to collapse
That means the phone doesn't have an OS to boot.

varunkumars said:
HI guys i installed Wanamalite DLH4 Jelly bean and then went back to stock I9300XXBLG8 stock. Installed separate CSC, MODEM and Kernel files but still i reebots and shows the samsung animation and stays there and won't get past. Help me guys please. Thanks.
Click to expand...
Click to collapse
Do you have CWM installed?? If so, boot into recovery then go to mounts and storage and format /data /cache / and /system.
Then clear cache and dalvik cache.
Then factory reset.
Then re-install stock ROM with ODIN.
Should be good to go.

Baldilocks said:
Do you have CWM installed?? If so, boot into recovery then go to mounts and storage and format /data /cache / and /system.
Then clear cache and dalvik cache.
Then factory reset.
Then re-install stock ROM with ODIN.
Should be good to go.
Click to expand...
Click to collapse
Thanks for the reply. But i don't have CWM installed. Could you help me to do that. Where do i find it. These days it pretty much comes with the modded ROMS. At least you gave me some air to breathe. Please help me with CWM

Can you get into download mode? If so, flash CF-Root. You'll probably still have the stuck Samsung Logo, but it SHOULD install CWM.
Then pull the battery, and see if you can boot into CWM Recovery.

ghostvirtual said:
That means the phone doesn't have an OS to boot.
Click to expand...
Click to collapse
Getting a bootloop doesn't mean the phone doesn't have a OS to boot!!!
in simple words it's not able to finish loading of all the apps before it shows the home screen. The reason for not able to finish boot may vary.

Baldilocks said:
Can you get into download mode? If so, flash CF-Root. You'll probably still have the stuck Samsung Logo, but it SHOULD install CWM.
Then pull the battery, and see if you can boot into CWM Recovery.
Click to expand...
Click to collapse
Thanks buddy. It worked. Learnt from my mistakes. Thank you sooooooo much.

varunkumars said:
Thanks buddy. It worked. Learnt from my mistakes. Thank you sooooooo much.
Click to expand...
Click to collapse
No problem. Glad I could help. Just hit the Thanks button if ya wish.

Related

[Q] S2 not starting in Recovery mode, only download mode

Hi guys.
It all started from ROM Manager where I did click on delete a backup, then phone crashed.
When I did start it up again, the main boot screen (with yellow triangle) did show for few seconds and then nothing.
Then I have the symbol flat battery (even if plugged), but not showing as charging.
I did try to remove battery, wait, put it back, same problem.
The device does not log into Recovery mode, only in download mode.
I then did try to reflash the kernel (Siyah 3.3.3d) from Odin, which was successful, but still same problem, after few seconds showing the boot image (Samsung + root logo), same problem.
Do you have an idea what's wrong?
I did try my battery in another S2 and it shows 92% which is correct. I then suspected a kernel problem but looks like Odin flash is not solving the issue.
Thanks for your help, and I love this forum, it contains so much!
soueric said:
Hi guys.
It all started from ROM Manager where I did click on delete a backup, then phone crashed.
When I did start it up again, the main boot screen (with yellow triangle) did show for few seconds and then nothing.
Then I have the symbol flat battery (even if plugged), but not showing as charging.
I did try to remove battery, wait, put it back, same problem.
The device does not log into Recovery mode, only in download mode.
I then did try to reflash the kernel (Siyah 3.3.3d) from Odin, which was successful, but still same problem, after few seconds showing the boot image (Samsung + root logo), same problem.
Do you have an idea what's wrong?
I did try my battery in another S2 and it shows 92% which is correct. I then suspected a kernel problem but looks like Odin flash is not solving the issue.
Thanks for your help, and I love this forum, it contains so much!
Click to expand...
Click to collapse
Looks like you might have to go to www.sammobile.com download a stock firmware and flash through odin. Then root it.
Thanks, I will try that now.
kilometers4 said:
Looks like you might have to go to www.sammobile.com download a stock firmware and flash through odin. Then root it.
Click to expand...
Click to collapse
Humm, I did flash it successful with Odin, however, on startup, I have the Samsung boot annimation and then the big coloured S, but it won't go further.
Do you have any ideas?
Is there a way to wipe all from Odin?
soueric said:
Humm, I did flash it successful with Odin, however, on startup, I have the Samsung boot annimation and then the big coloured S, but it won't go further.
Do you have any ideas?
Is there a way to wipe all from Odin?
Click to expand...
Click to collapse
Can you get to recovery?
If so, you can try to wipe cache and dalvik
and if that doesnt work, try to wipe data/factory reset.
Ohh I did not know I could reboot in recovery mode on a non rooted device.
OK I did wipe the cache and I didmange to go further the S logo.
Thanks very much for your help, it looks like phone did boot again.
So I kind of read not to use ROM Manager with any AOKP, is this correct?
What app should be used then to manage your roms?
Thanks,
soueric said:
Ohh I did not know I could reboot in recovery mode on a non rooted device.
OK I did wipe the cache and I didmange to go further the S logo.
Thanks very much for your help, it looks like phone did boot again.
So I kind of read not to use ROM Manager with any AOKP, is this correct?
What app should be used then to manage your roms?
Thanks,
Click to expand...
Click to collapse
Yea I wouldnt use rom manager period. I dont really know what you mean by managing your roms? You can just store them in your download folder/on your sd card and then reboot to recovery in cwm and flash through there.
Thanks kilometers4.
OK, so no need for ROM Manager, only doing things from CWM.
Any suggestion on tool to root the device and then having access to CWM?
soueric said:
Thanks kilometers4.
OK, so no need for ROM Manager, only doing things from CWM.
Any suggestion on tool to root the device and then having access to CWM?
Click to expand...
Click to collapse
Flash cf root to root your device, just make sure it matches your kernel.
---------- Post added at 07:37 PM ---------- Previous post was at 07:35 PM ----------
Try this link
http://forum.xda-developers.com/showthread.php?t=1103399
OK, thank's very much for your help mate, that did solve my issues.
I will now format all storage spaces to start from a fresh clean device.
Thanks buddy.
soueric said:
OK, thank's very much for your help mate, that did solve my issues.
I will now format all storage spaces to start from a fresh clean device.
Thanks buddy.
Click to expand...
Click to collapse
No problem, glad to help.
If you're looking for a stable ICS rom, I'd suggest RootBox. That is if you're wanting to flash another rom.
I did enjoy so far Lite'ning ROM, and I really loved Resurrection, which is the one I did use until this morning where I had this problem.
I may give a go to the one you mentioned.
It's not easy to find what's suits you best, but it's part of the fun.
Finding an appropriate kerlnel and modem is not easy too

HELP!!!!!! i9100P Stuck At Boot Screen With Yellow Triangle!!

Hi all,
I have a i9100P (with NFC) and it is stuck at the boot screen with the yellow triangle after I installed CWM using this method here:
galaxys2root (DOT) com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/
I can still enter Download mode and even the installed CWM, but i cannot boot into android, its just stuck on the screen
I have searched on the internet for a solution, and i cannot find a solution for this
would installing a new ROM via an SD card work? What shall i do?
HELP me PLS!!
thanks in advance!!!!
Carlover1998 said:
Hi all,
I have a i9100P (with NFC) and it is stuck at the boot screen with the yellow triangle after I installed CWM using this method here:
galaxys2root (DOT) com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/
I can still enter Download mode and even the installed CWM, but i cannot boot into android, its just stuck on the screen
I have searched on the internet for a solution, and i cannot find a solution for this
would installing a new ROM via an SD card work? What shall i do?
HELP me PLS!!
thanks in advance!!!!
Click to expand...
Click to collapse
Quote taken from site:
Galaxy S2 Reference
You will need a rooted Galaxy S2 to install all ROM/kernels.
NOTE: PLEASE ONLY INSTALL ROMS INTENDED FOR YOUR VERSION OF Galaxy S2! Otherwise you WILL BRICK YOUR PHONE and I will not be responsible! ALL ROMs on this site are ONLY for Verizon Galaxy S2!
First time to rooting and custom ROMs?
Please see our FAQ for your Galaxy S2 model FIRST!!!:
Click to expand...
Click to collapse
I wouldn't have tried this as your phone is i9100P, although I know the difference isn't that big.
Also, was your phone rooted? It had to have been rooted beforehand.
oddlyshapedstickman said:
Quote taken from site:
I wouldn't have tried this as your phone is i9100P, although I know the difference isn't that big.
Also, was your phone rooted? It had to have been rooted beforehand.
Click to expand...
Click to collapse
Hi, yes it was rooted prior to this, but i thought the only difference was that the P version had NFC - but now it seems I am stuck at the boot screen - any ideas? I would appreciate it a lot!
Flash your stock ROM and check it it works.
Stileth said:
Flash your stock ROM and check it it works.
Click to expand...
Click to collapse
Hi, thanks for the reply - i will try flashing it after i finish downloading it. I presume I will have to do the usual wipe data, clear cache etc?
"I searched all over the internet and couldnt find a solution"
Biggest load of crap Ive read on here.
Sent from my GT-I9100 using xda premium
Carlover1998 said:
Hi, thanks for the reply - i will try flashing it after i finish downloading it. I presume I will have to do the usual wipe data, clear cache etc?
Click to expand...
Click to collapse
Yes, that should help. Btw what version you are downloading? 4.0.3 or 4.0.4?
Stileth said:
Yes, that should help. Btw what version you are downloading? 4.0.3 or 4.0.4?
Click to expand...
Click to collapse
I am downloading 4.0.3 from here: devsrom4android.blogspot (DOT)co (DOT) uk/2012/06/i9100pxxlph-o2-uk-samsung-galaxy-s2-gt.html
4.0.3 is what I previously had, and I believe that was the exact firmware I had on the phone (o2 NFC version)
Carlover1998 said:
I am downloading 4.0.3 from here: devsrom4android.blogspot (DOT)co (DOT) uk/2012/06/i9100pxxlph-o2-uk-samsung-galaxy-s2-gt.html
4.0.3 is what I previously had, and I believe that was the exact firmware I had on the phone (o2 NFC version)
Click to expand...
Click to collapse
That's your problem. You were on 4.0.3, which is ICS.
The instructions at galaxys2root.com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/ don't specify, but they are for Gingerbread ONLY. The recovery kernel contained within that zip package is ClockworkMod Recovery 4.0.1.4, which is for Gingerbread.
This thread (http://forum.xda-developers.com/showthread.php?t=1118693) is the updated version of that recovery kernel for ICS.
You don't have to flash the full firmware, just flash a kernel that is meant to work with ICS and you should be fine.
ctomgee said:
That's your problem. You were on 4.0.3, which is ICS.
The instructions at galaxys2root.com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/ don't specify, but they are for Gingerbread ONLY. The recovery kernel contained within that zip package is ClockworkMod Recovery 4.0.1.4, which is for Gingerbread.
This thread (http://forum.xda-developers.com/showthread.php?t=1118693) is the updated version of that recovery kernel for ICS.
You don't have to flash the full firmware, just flash a kernel that is meant to work with ICS and you should be fine.
Click to expand...
Click to collapse
Thanks for the advice - but i already have the stock ROM on an SD card so i think i will flash this. Problem is i cannot get CWM to read from the external SD card, so i cannot locate the zip and install it - help?
EDIT: if i install the kernel you gave me the link to ([KERNEL][ICS] ClockworkMod Recovery 5.5.0.4) , will it remove the root access i had?
EDIT 2: I have just flashed the kernel via odin, and it finally got past the screen with the yellow triangle! However, it is now stuck on the second screen which shows the 'S' logo with the words 'Samsung Galaxy SII' under it. Any more ideas?
Carlover1998 said:
Thanks for the advice - but i already have the stock ROM on an SD card so i think i will flash this. Problem is i cannot get CWM to read from the external SD card, so i cannot locate the zip and install it - help?
EDIT: if i install the kernel you gave me the link to ([KERNEL][ICS] ClockworkMod Recovery 5.5.0.4) , will it remove the root access i had?
EDIT 2: I have just flashed the kernel via odin, and it finally got past the screen with the yellow triangle! However, it is now stuck on the second screen which shows the 'S' logo with the words 'Samsung Galaxy SII' under it. Any more ideas?
Click to expand...
Click to collapse
Can you boot to recovery? If so, you can try a factory reset/wipe data. You'll lose all your data, (not counting pictures/media) but at this point, do you have anything to lose?
ctomgee said:
Can you boot to recovery? If so, you can try a factory reset/wipe data. You'll lose all your data, (not counting pictures/media) but at this point, do you have anything to lose?
Click to expand...
Click to collapse
I just tried that, i can boot into the new cwm - have nothing to lose since i've only had it for about 3 days - however even after the wipe data, cache and dalvik it is still stuck on the 'S' screen now
Carlover1998 said:
I just tried that, i can boot into the new cwm - have nothing to lose since i've only had it for about 3 days - however even after the wipe data, cache and dalvik it is still stuck on the 'S' screen now
Click to expand...
Click to collapse
Well, now I'd say you need to flash a full firmware. You said you downloaded I9100PXXLPH from here? Should work. But you'll no longer be rooted, and you won't have CWM recovery.
How did you get into this in the first place? You wanted CWM recovery?
ctomgee said:
Well, now I'd say you need to flash a full firmware. You said you downloaded I9100PXXLPH from here? Should work. But you'll no longer be rooted, and you won't have CWM recovery.
How did you get into this in the first place? You wanted CWM recovery?
Click to expand...
Click to collapse
I will be sure to try that, and basically earlier today i rooted it successfully, and then i had to get CWM onto it so i could start flashing new ROMs etc, and i tried installing CWM via that method that has now caused all of this
Never the less i will try your suggestion, so should i basically mount usb from CWM, then copy the firmware over to the phone, unmount, and then wipe, and then flash it finally?
EDIT: it wont allow me to mount USB in CWM
can i just flash the ZIP using odin in download mode, or does it have to be a .tar file?
Carlover1998 said:
I will be sure to try that, and basically earlier today i rooted it successfully, and then i had to get CWM onto it so i could start flashing new ROMs etc, and i tried installing CWM via that method that has now caused all of this
Never the less i will try your suggestion, so should i basically mount usb from CWM, then copy the firmware over to the phone, unmount, and then wipe, and then flash it finally?
Click to expand...
Click to collapse
No. That download is for a package that must be flashed while the phone is in download mode. That will require you to use a computer, and a flashing tool, such as Odin or Heimdall.
ctomgee said:
No. That download is for a package that must be flashed while the phone is in download mode. That will require you to use a computer, and a flashing tool, such as Odin or Heimdall.
Click to expand...
Click to collapse
How would I go about flashing it in download mode, i really have no idea as I don't think you can flash zip files in odin, forgive me for all of the questions I really appreciate your help!
EDIT: I have unzipped the file and hooray lies in it the .tar.md5 file! I am in the middle of flashing this and will report back on results
Thanks a lot guys!!
THANKS GUYS FOR ALL OF YOUR HELP, my SII is now working fully again! Cheers to all that helped, flashing the stock firmware worked with wipe/cache
Can't thank you enough!
Last thing if you don't mind, i want to root it again using this: (http://forum.xda-developers.com/showthread.php?t=1321582)
Now after that, how can i install CWM without getting into the mess i got into today? cheers!
Nope, I think that's for GB. For easy root use method 1 from 1st guide in my signature.
Stileth said:
Nope, I think that's for GB. For easy root use method 1 from 1st guide in my signature.
Click to expand...
Click to collapse
But it appears that this will not give you permanent CWM recovery. Which is what I think he wants.
ctomgee said:
But it appears that this will not give you permanent CWM recovery. Which is what I think he wants.
Click to expand...
Click to collapse
Well I think Chainfire's CF-Root kernels (http://forum.xda-developers.com/showthread.php?t=1103399) are not for i9100P, so not sure if he can achieve permanent CWM recovery. Anyway if he don't plan to flash every hour new ROM he should be fine with latest temporary CWM 6: http://forum.xda-developers.com/showthread.php?t=1840223 although will ask Phil about compatibility.

S2 stucked in boot after flash

Yo guys,
I got a S2 I-9100 and I flashed the new Siyah Kernel onto it via Heimdall. The Problem is that if i boot it, the Samsung logo and the Siyah logo appears but afterwards the screen turns black.
Its propably not turned off cos I can't restart it without removing the battery.
Download and Recovery still works. I tried to use the wipe data/factory reset, but that didn't worked.. actually nothing happened.
Also tried to flash the Original Kernel (KF3) but the Phone gets stucked in boot on the Samsung logo..
Would be nice if someone could help me
zzzEE said:
Yo guys,
I got a S2 I-9100 and I flashed the new Siyah Kernel onto it via Heimdall. The Problem is that if i boot it, the Samsung logo and the Siyah logo appears but afterwards the screen turns black.
Its propably not turned off cos I can't restart it without removing the battery.
Download and Recovery still works. I tried to use the wipe data/factory reset, but that didn't worked.. actually nothing happened.
Also tried to flash the Original Kernel (KF3) but the Phone gets stucked in boot on the Samsung logo..
Would be nice if someone could help me
Click to expand...
Click to collapse
You may have a problem with rom not supporting your kernel. Get formatted system,cache, data and put dorimanx latest kernel onto your phone via recovery. From this point you should be able to flash any CM rom you can get. If it still persist, go for odin and lastest Samsung Official
cortex69 said:
You may have a problem with rom not supporting your kernel. Get formatted system,cache, data and put dorimanx latest kernel onto your phone via recovery. From this point you should be able to flash any CM rom you can get. If it still persist, go for odin and lastest Samsung Official
Click to expand...
Click to collapse
Thanks for ur quick answer, I did format onto system,cache and data through recovery - mounts and storage, I guess thats right but when i want to install the dorimanx kernel it just says: can't open "....".zip (bad) and aborts the installation.
zzzEE said:
Thanks for ur quick answer, I did format onto system,cache and data through recovery - mounts and storage, I guess thats right but when i want to install the dorimanx kernel it just says: can't open "....".zip (bad) and aborts the installation.
Click to expand...
Click to collapse
What code did it show 0 or 7?
KingOfDope said:
What code did it show 0 or 7?
Click to expand...
Click to collapse
Neither one of them, just (bad)
well the only reason is that it didn't downloaded good, so redownload... or try with another sd card. or try to put the zip/rom in your internall sd. by going into recovery>format & mount>mount usb storage and now connect to your pc and drop the zip/rom into your sd card or internal sd :highfive:
KingOfDope said:
well the only reason is that it didn't downloaded good, so redownload... or try with another sd card. or try to put the zip/rom in your internall sd. by going into recovery>format & mount>mount usb storage and now connect to your pc and drop the zip/rom into your sd card or internal sd :highfive:
Click to expand...
Click to collapse
uhm thanks redownload worked, phone is running again thanks
zzzEE said:
uhm thanks redownload worked, phone is running again thanks
Click to expand...
Click to collapse
Have fun ! I recommend you to get yourself USB jig and get onto WIP CM11 thread http://forum.xda-developers.com/showthread.php?t=2523604
I think that dev needs some people to get everything tested, even though it's not even booting. But he shared a way to get log from the device at 7th page of the thread !
zzzEE said:
uhm thanks redownload worked, phone is running again thanks
Click to expand...
Click to collapse
Yess, hhehehe thanks button would help me :angel: :victory: :highfive:
have fun with your phone! :fingers-crossed:

[Q] Black Screen after Installing Font using (iFont) apk! Need Help Guys!

Hello guys, I need some help with my CM Flare S100, last night I tried to change my font using an app (iFont) and then after installing and applying it reboot itself and then after I waited for like 2-3 minutes, I opened it up, and then the Problem is after the CM and Android boot animation shows up it turns into black screen, stuck in black screen. I also tried to wipe its data / factory reset, wipe cache, and reboot many times but it always comes back. What to do? Please Help! :crying: :crying:
P.S.
If you guys know what is the solution, then help me 'coz I need your help.
k1labban17120692 said:
Hello guys, I need some help with my CM Flare S100, last night I tried to change my font using an app (iFont) and then after installing and applying it reboot itself and then after I waited for like 2-3 minutes, I opened it up, and then the Problem is after the CM and Android boot animation shows up it turns into black screen, stuck in black screen. I also tried to wipe its data / factory reset, wipe cache, and reboot many times but it always comes back. What to do? Please Help! :crying: :crying:
P.S.
If you guys know what is the solution, then help me 'coz I need your help.
Click to expand...
Click to collapse
Do you have a backup? Then restore or else just flash rom. Will be fine after that.
Mufrad said:
Do you have a backup? Then restore or else just flash rom. Will be fine after that.
Click to expand...
Click to collapse
Thanks but I forgot to backup my files, so I do not think it will work restoring into factory reset coz I tried it many times. How to do Flash via PC?
k1labban17120692 said:
Thanks but I forgot to backup my files, so I do not think it will work restoring into factory reset coz I tried it many times. How to do Flash via PC?
Click to expand...
Click to collapse
Do you have custom recovery?
Mufrad said:
Do you have custom recovery?
Click to expand...
Click to collapse
I do not know, I use Stock Recovery (Switch on + Volume up) is that so.. Sorry, I am newbie in android, can you help fix my problem?
k1labban17120692 said:
I do not know, I use Stock Recovery (Switch on + Volume up) is that so.. Sorry, I am newbie in android, can you help fix my problem?
Click to expand...
Click to collapse
Install cwm custom recovery from here:
forum.xda-developers.com/showthread.php?t=2057511
This is only a custom recovery, it will not fix your phone, it's a step towards fixing it.
What version of Android were you using? Asking because to tell you which rom to flash I will need to know which rom you had previously.
Mufrad said:
Install cwm custom recovery from here:
forum.xda-developers.com/showthread.php?t=2057511
This is only a custom recovery, it will not fix your phone, it's a step towards fixing it.
What version of Android were you using? Asking because to tell you which rom to flash I will need to know which rom you had previously.
Click to expand...
Click to collapse
By the way thanks a lot! But I already fixed it through downloading and installing the v45 Custom Rom of Cherry Mobile Flare, thanks anyway

[Q] Complete beginner with softbricked device (SCH-I905)

hey guys, as mentioned in the title I am a complete beginner with rooting so I had to follow the rather old guides here on xda. To keep the story short: After the initial root I got the e:signature vertification failed error, so after endless googling and flashing different recoveries I am now in a difficult spot and getting quite frustrated. My device is stuck in a bootloop, I only see 'Galaxy Tab 10.1' and after that the screen goes black.
I have tried holding the power and volume buttons to enter recovery mode, except there are 2 problems to that: 1. My model of the device (vzw 4g lte SCH-I905) is almost non existent in the world of tablet rooting so there are no stock roms and 2. When I select the recovery mode option on my tablet the screen just goes black and nothing happens.
Anybody have any thoughts on how to fix my tablet? any help is appreciated and I can provide any other details you need to the best of my ability thanks guys!
Try flashing this recovery in Odin. http://droidbasement.com/db-blog/?p=3158
Sent from my GT-P7500 using Tapatalk
@eushaun99 Thank you, it is late so I will try this tomorrow.
Hi @eushaun99, I flashed that recovery via odin and it worked, thanks a million, appreciate your help! However, my device is still in a bootloop, even after a factory reset. I would like to fix that so I can connect the device to my computer and install the ROM thru recovery mode or could I do that thru odin as well? Thanks again!
ryuseiaxe said:
Hi @eushaun99, I flashed that recovery via odin and it worked, thanks a million, appreciate your help! However, my device is still in a bootloop, even after a factory reset. I would like to fix that so I can connect the device to my computer and install the ROM thru recovery mode or could I do that thru odin as well? Thanks again!
Click to expand...
Click to collapse
Well, since the flashing of recovery worked, then just boot into recovery, make a full wipe of system, data, cache and dalvik cache and flash the ROM of your choice. If you want to flash stock ICS then boot into download mode and flash via Odin, but since your p4vzw doesn't have any stock ROM available, I can't help with that. The only p4vzw ROM that I know of would be Infamous AOKP 4.2 by kasper_h, maybe you can try that.
Sent from my GT-P7500 using Tapatalk
eushaun99 said:
Well, since the flashing of recovery worked, then just boot into recovery, make a full wipe of system, data, cache and dalvik cache and flash the ROM of your choice. If you want to flash stock ICS then boot into download mode and flash via Odin, but since your p4vzw doesn't have any stock ROM available, I can't help with that. The only p4vzw ROM that I know of would be Infamous AOKP 4.2 by kasper_h, maybe you can try that.
Sent from my GT-P7500 using Tapatalk
Click to expand...
Click to collapse
I have found the AOKP rom you were talking about, but now the problem for me is to get it onto my tablet so I can flash the ROM. I have wiped the system, data, cache and dalvik like you said but I am still unable to get out of the bootloop after I restart it. During the bootloop it shows Samsung galaxy tab 10.1 and then a yellow icon comes out, sort of like a yield sign, and then the screen just shuts off, any thoughts?
ryuseiaxe said:
I have found the AOKP rom you were talking about, but now the problem for me is to get it onto my tablet so I can flash the ROM. I have wiped the system, data, cache and dalvik like you said but I am still unable to get out of the bootloop after I restart it. During the bootloop it shows Samsung galaxy tab 10.1 and then a yellow icon comes out, sort of like a yield sign, and then the screen just shuts off, any thoughts?
Click to expand...
Click to collapse
But you can get into recovery right? Then you can use adb to sideload the ROM zip into your tab.
Sent from my GT-P7500 using Tapatalk
eushaun99 said:
But you can get into recovery right? Then you can use adb to sideload the ROM zip into your tab.
Sent from my GT-P7500 using Tapatalk
Click to expand...
Click to collapse
good news, I have fixed my tablet! Much thanks to @eushaun99 I appreciate your help very much, I would give you a million thanks if I could
ryuseiaxe said:
good news, I have fixed my tablet! Much thanks to @eushaun99 I appreciate your help very much, I would give you a million thanks if I could
Click to expand...
Click to collapse
Hehe, no problem. Glad I could help.
Sent from my GT-P7500 using Tapatalk

Categories

Resources