SOS: Help a Noob stuck at Samsung screen upon attempt to root - AT&T Samsung Galaxy Note I717

Hello,
Could you pls help a noob with a rooting problem? I attempted to root my ICS AT&T Galaxy Note i-717 using Odin3 v 1.85 and a pda.tar file. Prior to that, I had checked and confirmed the USB drivers are installed (I have Kies software installed on the PC. However, folliwing the succesful flash of pda.tar I got the phone stuck at the Samsung screen. I could still get to the download screen. However, the phone would not go pass that screen. Can you pls tell me what I did wrong/guide me w simple steps on how to fix the phone and finish the root? I have the read many different root treads but I find them confusing. Treads are ponting at different files to be frashed/installed on the phone. Thanks very much.

This happens from time to time...don't worry.
Reboot phone in download mode, connect phone, reflash kernel.
A few things: use stock samsung cable. Use back of computer usb port. Reboot computer before you try again. Re download the kernel to be sure your file is not corrupted. Make sure phone battery is more than 80%.

re:
rangercaptain said:
This happens from time to time...don't worry.
Reboot phone in download mode, connect phone, reflash kernel.
A few things: use stock samsung cable. Use back of computer usb port. Reboot computer before you try again. Re download the kernel to be sure your file is not corrupted. Make sure phone battery is more than 80%.
Click to expand...
Click to collapse
Rangercaptain,
Thanks very much. Where can I get the kernel from and which one/which file do I need to flash? Also, how do I flash it? Do I use Odin or another method? Again Thanks a lot!

ptanev said:
Rangercaptain,
Thanks very much. Where can I get the kernel from and which one/which file do I need to flash? Also, how do I flash it? Do I use Odin or another method? Again Thanks a lot!
Click to expand...
Click to collapse
Follow the part one instructions in the first post. Read twice click once. Take your time.
http://forum.xda-developers.com/showthread.php?p=24539068

Make sire lies is closed
Sent from my SAMSUNG-SGH-I717 using xda premium

Nolenm04 said:
Make sire lies is closed
Click to expand...
Click to collapse
Make sure Kies is closed
Yes, good suggestion. I would reboot the computer, put the phone in download, open Odin3, then plug in phone.
All that is well explained in the thread.

Problem solved
rangercaptain said:
Make sure Kies is closed
Yes, good suggestion. I would reboot the computer, put the phone in download, open Odin3, then plug in phone.
All that is well explained in the thread.
Click to expand...
Click to collapse
All,
Thanks very much for your help! I fugured it out and am now up and running!
I ended up flashing rooted Stock ICS ROM from FJ!
Thanks very much to all of you and FJ!

rangercaptain said:
Make sure Kies is closed
Yes, good suggestion. I would reboot the computer, put the phone in download, open Odin3, then plug in phone.
All that is well explained in the thread.
Click to expand...
Click to collapse
Oh snap lol just noticed I misspelled half of that oops
Sent from my SGH-I717 using xda premium

Nolenm04 said:
Oh snap lol just noticed I misspelled half of that oops
Sent from my SGH-I717 using xda premium
Click to expand...
Click to collapse
I liked it....:laugh:.....:good:

I thought it was drunk-xda-ing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

rangercaptain said:
I thought it was drunk-xda-ing.
Click to expand...
Click to collapse
:laugh:

rangercaptain said:
I thought it was drunk-xda-ing.
Click to expand...
Click to collapse
Lol
View attachment 1291558
Sent from A Closet @ Arkham Asylum on my GNote using Forum Runner, Black ★.

Stuck at Samsung
I have the same issue tho have tried troubleshooting and could really use some extra help.
Updated to ATT stock ICS update a few months ago. Everything workin fine.
Wanted to root it so I could back everything up not to lose anything when moving to JB.
Rooted by flashing Da_G's pda.tar, reboot, and then flashed 2.3.3.0 TWRP
Noticed it was stuck at Samsung.
Here's where I'm kickin myself because I should have backed it up before all this, but I waited because I figured root doesn't wipe data!
Entered TWRP, backed up.
Now what I've tried to fix it... and failed
1. Reflashed pda.tar about 5 times
2. Found a stock pda "pda-odin-att-stock.tar", flashed (fixed) but it's stock setup and contacts and other google services don't work, lost homescreen icon placement and all other settings.
3. TWRP: Restore all = stuck at Samsung again
4. Repeat 2 and Restore only System
5. Repeat 2 and Restore only Data
6. Repeat 2 and flash pda.tar = boots, but same thing with it all stock, so I restore and it's stuck again.
It's my wife's phone and she has contacts that aren't saved in Google, to-do lists saved in app data files, and to be honest, she said everything better be exactly the same after updating (which I promised it would be since the plan was to root, backup, update, and restore), so I'm kinda trying to save my hide. PLEASE HELP me save my ass ha!
Other things to note: I just rooted a new phone about 30mins prior with the exact same root and TWRP files and it went very smooth, no issues.
Using a Samsung original cable on a laptop. Phone Battery was ~30% when I did all the steps, but since then read that battery should be higher so swapped out to fully charged battery and retried the steps.

Using the root kernel you did, basically flashed a Gingerbread kernel over an ICS rom. (Doesn't work)
Your best bet at this point, is too flash a rooted ICS build from bigfau ...(located in the super thread stock section)
Just flash using TWRP ....BUT !!!
make sure you wipe the dalvik cache, system cache, and system before flashing the rooted ICS build.
Once the rom is flashed, you will be stock and rooted.
Regarding data you have lost with no backup....start begging forgiveness now ....it's gone ....g

gregsarg said:
Using the root kernel you did, basically flashed a Gingerbread kernel over an ICS rom. (Doesn't work)
Your best bet at this point, is too flash a rooted ICS build from bigfau ...(located in the super thread stock section)
Just flash using TWRP ....BUT !!!
make sure you wipe the dalvik cache, system cache, and system before flashing the rooted ICS build.
Once the rom is flashed, you will be stock and rooted.
Regarding data you have lost with no backup....start begging forgiveness now ....it's gone ....g
Click to expand...
Click to collapse
Wouldn't I be able to just flash an ICS Kernel to undo the GB kernel and set things straight? Or is the whole thing ruined already?
I have the data/app and data/data files. If all's really lost, I'll just put JB on it. If I copy the data/app and data/data files onto the new image will all the apps with their settings/data be restored at least?

Yes, flash the correct kernel.

I think what happened to me is the OS got deleted cuz once I flashed a rom I was good to go!

Related

Clockworkmod installation how to for windows / *nix

THESE FILES ARE ONLY FOR THE VERIZON FASCINATE
THESE FILES HAVE NOT BEEN TESTED ON ANY OTHER SGS PHONE BY ME
THESE FILES WILL PROBABLY NOT WORK FOR YOUR PHONE IF IT IS NOT A VERIZON FASCINATE
First, download and install the samsung drivers found here: http://forum.xda-developers.com/showthread.php?t=779238
Then download odin from here: https://sites.google.com/a/imnuts.net/android/update-to-dj05/Odin.zip?attredirects=0&d=1
Then download the clockwork package from here: http://goo.gl/HELdr
If you have a lag fix installed, remove it. This is my opinion, and is completely optional. But i do not recommend the lag fixes, as the ones that install / work on the fascinate do nothing really, just wait for voodoo port
Then:
Put phone into download mode.
-Turn off phone
-Pull battery
-Press vol down button while plugging into computer
-Should show a yellow triangle
Open odin on pc
-Odin should show a yellow bar with a com port showing that it detects your phone
Click "PDA" button and select the CWMrecovery.tar you downloaded earlier
Click start
This will reboot your phone when complete. This flashes both the kernel and the recovery partition to enable you to flash update.zips signed with test keys. You will need to download Rom Manager from the market and select flash Clockwork Mod and select "fascinate"
To use clockwork, you can reboot recovery and Rom Manager, or cold boot into recovery (power off phone, power back on while holding both volume keys). If you cold boot into recovery you need to select apply update.zip and it will launch ClockworkMod.
Optional: ClockworkMod update.zip file (place this in your sdcard's root, and only download this if you cannot get into rom manager) http://dl.dropbox.com/u/458252/Fascinate Files/update.zip
If this post has helped you, please consider reading this:
Donations! Well, i have never asked for donations, but i would like to ask that if these files or any of my work has helped you in any way, please go to world vision and donate as you see fit. All of my work has been done for me, and i release it as i know other people would like it / need it.
sonofskywalker3 said:
anyone having issues with navigating the recovery here's how it works:
Stock recovery:
Select - Home Softkey
Blank Screen - Menu Softkey
Clockwork mod:
Select - Back Softkey or power button
Blank Screen - Home Softkey
Back - Search Softkey
Click to expand...
Click to collapse
For Mac / Linux users:
download:
http://dl.dropbox.com/u/458252/Fascinate Files/nixCWMfascinate.zip
Follow readme.txt inside zip
Big thanks to lilinser / dkcldark; koush; humancyborg, namebrandon, geeknik, and many others that were testing and constantly flashing their phones!
And without ludeboy, well, i wouldnt even be able to get into download mode to fix my phone in the first place
Thank you!
I didn't pull the battery, just turned the phone off while holding the volume down button. Maybe I should have, as it is stuck on the Nandroid backup on Linux.ex2.
Edit, spoke too soon. I unplugged the USB cable, and is finished updating. Bring on the kernels! I want to see what this does clocked.
If you do a Nandroid backup with the lagifx installed it takes a LONG time
edit: I have done all of my odin work with the battery in and have had 0 problems
also remember, if you try to boot into recovery and you dont see it. FLASH THE RECOVERY IN ROM MANAGER TWICE.
CheetoDroid said:
If you do a Nandroid backup with the lagifx installed it takes a LONG time
edit: I have done all of my odin work with the battery in and have had 0 problems
Click to expand...
Click to collapse
Yes, nandroid backups will take a LONG time to complete if you are using a lagfix. I would start removing the lagfix now, we have something much much better planned for you guys.
And pulling the battery isnt necessary, just insures that new people get it done right, eliminates some questions / problems.
Removed lagfix, and confirmed that everything here works.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OMFG I have Clockwork back on my phone.
I feel so complete now.
Daswolven said:
OMFG I have Clockwork back on my phone.
I feel so complete now.
Click to expand...
Click to collapse
me too.
might have to masturbate now.
kirwoodd said:
me too.
might have to masturbate now.
Click to expand...
Click to collapse
Thanks for sharing.
I suppose I'll have to try to find out how to remove the lag fix. I can't wait for some thing better!
kirwoodd said:
me too.
might have to masturbate now.
Click to expand...
Click to collapse
LMFAO! ****in hilarious
I am wondering what that something thats better than the lagfix is
Wow. .. Thank you all very much!
This works GREAT! Idk why I did this earlier, and it didn't mount my SD Card, but I'm doing a backup now!!! thanks!
taypotts said:
This works GREAT! Idk why I did this earlier, and it didn't mount my SD Card, but I'm doing a backup now!!! thanks!
Click to expand...
Click to collapse
+1 on that backup, lets get an almost stock rom for me to flash back to in case of a bad event.
Perfect write up, I ve never worked with odin and that made it pretty simple.
destroyerbmx said:
+1 on that backup, lets get an almost stock rom for me to flash back to in case of a bad event.
Perfect write up, I ve never worked with odin and that made it pretty simple.
Click to expand...
Click to collapse
stock roms can be found in my odin restore thread, at least as close to stock as we can get right now.
Thanks ya'll, you guys are awesome!!!!!!!
So I have a question....may be a dumb one....but why is it called Odin? Is that Samsung specific? The reason I ask is Odin was a code name for the 9550 storm and so it confuses me. Thanks and sorry for off topic.
success
it worked perfectly as described...
i removed lagfix first
ran ROM Manager (premium i flashed CWM twice, just to be sure...
i backed it up in ROM Manager.. when i rebooted to recovery from RM i got an MD5 checksum error when trying to restore..
I then ran a backup while in recovery.. during that backup i got no /sdcard/.android_secure found but it seemed to complete.
I used restore created from nandroid and it completed error free. (tho it did take a while, even with no lagfix (lots of data, apparently))
My phone booted just fine afterwards.... but it did sit for a while at the VZW splash screen. it made be nervous.. but i was patient
THANK YOU!
EDIT: In RM... i renamed the backup that i made in CMR and then chose to restore... it booted into CMR as expected and started restoring... completed successfully.
when it completes booting... i get a system alarm tone that doesnt go away until i use the notification pulldown... it did after both times i used the recovery.
Now that we have clockworkmod we can remove apps as long as we backed up right? I was getting rid of some bloat but stopped before i went to far. Sorry for sounding like a noob

Big problem!!!! Really!!!!

Hi everyone,
You are my last chance to fix my phone.
My computer can't see my phone (unknown device) i tried everything including reinstalling windows! and using Windows 7 / Windows XP, so it has to be my phone.
I can't use ODIN (my pc can't see my phone) which is my biggest problem.
Now I have ****ing CwM 3.0 so i can't even flash any rom only GB.
I couldn't even flash CwM 2.5 using CwM 3.0
I tried to flash Stock ED01 update.zip but failed coz of /system/build.prop.
I tried flashing many roms but failed because of CwM 3.0
Is there a way out?
how can i get rid of CwM3.0 using only MicroSD card reader?
can I reflash to Stock some how?
thanks everyone.
hanifaz said:
Hi everyone,
You are my last chance to fix my phone.
My computer can't see my phone (unknown device) i tried everything including reinstalling windows! and using Windows 7 / Windows XP, so it has to be my phone.
I can't use ODIN (my pc can't see my phone) which is my biggest problem.
Now I have ****ing CwM 3.0 so i can't even flash any rom only GB.
I couldn't even flash CwM 2.5 using CwM 3.0
I tried to flash Stock ED01 update.zip but failed coz of /system/build.prop.
I tried flashing many roms but failed because of CwM 3.0
Is there a way out?
how can i get rid of CwM3.0 using only MicroSD card reader?
can I reflash to Stock some how?
thanks everyone.
Click to expand...
Click to collapse
I dont know the total answer to the problem, but had a thought. Why dont you take the sd card out, put it in your computer, download commrom or evil fascination and flash that through CWM 3.0. If th gets you up and running, it may help with all your other issues and allow you to odin what you want.
There's no need to use aggressive language there, and you might have been better off posting I'm the Questions and Answers to avoid flaming. Have you installed the drivers for the Fascinate correctly?
Sent from my Fascinate with CM7 Gingerbread
Post this in the right section next time, we don't need more clutter in this section. Maybe you should be prepared for this to happen.
Comm romm or evil fascination are both supported by edify.
You know whats an even bigger problem? People not posting in the right section.
tonu42 said:
Post this in the right section next time, we don't need more clutter in this section. Maybe you should be prepared for this to happen.
Comm romm or evil fascination are both supported by edify.
Click to expand...
Click to collapse
But smart people such as yourself don't go to that section. How is he gonna get help?
good day.
xgunther said:
You know whats an even bigger problem? People not posting in the right section.
Click to expand...
Click to collapse
You know what's an even bigger problem? People who find it necessary to point out a post in the wrong section when it had been said twice already! Thank you so much for your contribution!
To the OP, did you install the Samsung drivers? Check the stickies for a link. Our phones don't play well with computers until they are installed. And use the 32 bit drivers. I have had way better luck with those.
Sent from my SCH-I500 using XDA App
I would say it might be you need the fascinate drivers. You said you reinstalled windows, but never mentioned reinstalling the drivers for the phone
Yeah i would try and reinstall the drivers, or try on a linux comp (where you dont need drivers and heimdall works). But you should be able to flash UKB (com rom) or EF using cwm3, with no problems, cuz i use cwm3 and i've flashed both. But your first move should be reinstall drivers and try again on win7.
http://adbdev.com/danknub/Samsung_Mobile_USB_Driver_V1.3.550.0_SCH-i500_Fascinate.msi
There's the drivers that work on my win7 comp.
Hope this helps.
I think OP has a broken usb port on his phone. Just from what he says in this thread and his other threads pertaining to this very issue. Example. So sounds like it is off to repair.
good day.
chopper the dog said:
I think OP has a broken usb port on his phone. Just from what he says in this thread and his other threads pertaining to this very issue. Example. So sounds like it is off to repair.
good day.
Click to expand...
Click to collapse
Could be that too bro, but it also sounds like he needs to use linux next time
Accord281 said:
You know what's an even bigger problem? People who find it necessary to point out a post in the wrong section when it had been said twice already! Thank you so much for your contribution!
To the OP, did you install the Samsung drivers? Check the stickies for a link. Our phones don't play well with computers until they are installed. And use the 32 bit drivers. I have had way better luck with those.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Umm excuse me. You know what's even a bigger, super huge, Epic (4G) problem? People who find it necessary to point out that it's a problem for people to point out a post in the wrong section when it had been said twice already!
And may I just point out that you Mr. Accord281, only have 1 thank on your meter, whereas I have 4 times that amount. I think we know who has the bigger ****.
Thanks for your contribution.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For some reason Kaos-CM7 changes CWM flash this
http://forum.xda-developers.com/showthread.php?t=1046905
then restart recovery and flash what ever you need
hanifaz said:
Hi everyone,
You are my last chance to fix my phone.
My computer can't see my phone (unknown device) i tried everything including reinstalling windows! and using Windows 7 / Windows XP, so it has to be my phone.
I can't use ODIN (my pc can't see my phone) which is my biggest problem.
Now I have ****ing CwM 3.0 so i can't even flash any rom only GB.
I couldn't even flash CwM 2.5 using CwM 3.0
I tried to flash Stock ED01 update.zip but failed coz of /system/build.prop.
I tried flashing many roms but failed because of CwM 3.0
Is there a way out?
how can i get rid of CwM3.0 using only MicroSD card reader?
can I reflash to Stock some how?
thanks everyone.
Click to expand...
Click to collapse
have you tried to re-install samsung driver? phone needs to be recognized otherwise you can't really do much.
xvoorheesx said:
For some reason Kaos-CM7 changes CWM flash this
http://forum.xda-developers.com/showthread.php?t=1046905
then restart recovery and flash what ever you need
Click to expand...
Click to collapse
Kaos' flashes the same type of cwm. Just an earlier version. Just without my and nemesis2all's edits. so that wont help him, but this
http://db.tt/Mb3tQO8
Will get him back to cwm2.5.x
Sent from my SCH-I500 using XDA App
xgunther said:
Umm excuse me. You know what's even a bigger, super huge, Epic (4G) problem? People who find it necessary to point out that it's a problem for people to point out a post in the wrong section when it had been said twice already!
And may I just point out that you Mr. Accord281, only have 1 thank on your meter, whereas I have 4 times that amount. I think we know who has the bigger ****.
Thanks for your contribution.
Click to expand...
Click to collapse
+1 that is funny as hell. The "four times that number" had me rolling. Bravo good sir, bravo
Posted however I damn well please
Thats what I think too, broken usb, but I can still charge my phone!
hanifaz said:
Thats what I think too, broken usb, but I can still charge my phone!
Click to expand...
Click to collapse
Are you using an oem cord?
Sent from my SCH-I500 using XDA Premium App
You the man
times_infinity said:
Kaos' flashes the same type of cwm. Just an earlier version. Just without my and nemesis2all's edits. so that wont help him, but this
http://db.tt/Mb3tQO8
Will get him back to cwm2.5.x
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
this is the fix!
I've had this problem, my usb charges my phone but doesn't recognize it on my pc.
Try to get a hold of someone elses charger and see if that works
i used an att captivate usb and I was able to connect to odin

[Q] Wants to upgrade my phone HELP

Hello. I've got an lg p500 optimus one, which I have never updated since I got it. The lg's software always give me the same error.
Here is the phones info:
Android-version: 2.2
Kernel version: 2.6.32.9
Software version: V10C-OCT-12-2010
Click to expand...
Click to collapse
My phone is also rooted with "z4root"
I now want to breath some fresh life in to it. I am thinking about changing to a custom rom. But I am totally new to this, and doesn't want to end up with an bricked phone. What should I do first? I see there are many good guides, but I am not sure which I should take since my phone is so outdated. Does anybody got any suggestion?
Sorry if this is posted in wrong section.
Balls69 said:
Hello. I've got an lg p500 optimus one, which I have never updated since I got it. The lg's software always give me the same error.
Here is the phones info:
My phone is also rooted with "z4root"
I now want to breath some fresh life in to it. I am thinking about changing to a custom rom. But I am totally new to this, and doesn't want to end up with an bricked phone. What should I do first? I see there are many good guides, but I am not sure which I should take since my phone is so outdated. Does anybody got any suggestion?
Sorry if this is posted in wrong section.
Click to expand...
Click to collapse
download rom mananger for market....it will flash cwm recovery for u..
then download any rom(fresh cm9.) and put it in ur sd card ..
boot into recovery(by switching on ur phone while pressing vol. down+home)...and
then
wipe everything except ur sdcard ..
now flash zip from sdcard and chose the zip and done
26jtyjn said:
download rom mananger for market....it will flash cwm recovery for u..
then download any rom(fresh cm9.) and put it in ur sd card ..
boot into recovery(by switching on ur phone while pressing vol. down+home)...and
then
wipe everything except ur sdcard ..
now flash zip from sdcard and chose the zip and done
Click to expand...
Click to collapse
That won't work. You have to change to the new baseband before you use CM9. Upgrade to 2.3.3 first, then flash the rom
Sent from my LG-P500 using xda premium
using baseband fix is better thaan updating baseband and even if you want to upgrade basrband, kdz is not a good idea flashing new baseband through lgmdp is better.
Sent from my LG-P500 using Tapatalk
sachin kamboj said:
using baseband fix is better thaan updating baseband and even if you want to upgrade basrband, kdz is not a good idea flashing new baseband through lgmdp is better.
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
+1 to lgmdp method
26jtyjn said:
+1 to lgmdp method
Click to expand...
Click to collapse
What method is that? And how do I start? I am a completely noob, so a guide or something would be nice. Or you can explain me yourself, but please. Dont assume that I know anything, because I dont. Hehe
Balls69 said:
Hello. I've got an lg p500 optimus one, which I have never updated since I got it. The lg's software always give me the same error.
Here is the phones info:
My phone is also rooted with "z4root"
I now want to breath some fresh life in to it. I am thinking about changing to a custom rom. But I am totally new to this, and doesn't want to end up with an bricked phone. What should I do first? I see there are many good guides, but I am not sure which I should take since my phone is so outdated. Does anybody got any suggestion?
Sorry if this is posted in wrong section.
Click to expand...
Click to collapse
Since I believe the rest of the posts are a bit too much for the beginner, I hope this post breaks it down. I'm bad at using the forum editing tools , so forgive me for bad editing.
First, your phone is old baseband. Old baseband means that the software used to access the sim card and make calls is old. It does not mean that they are no good ROMs for it. One of the most stable and up to date rom I found was OMGB (http://forum.xda-developers.com/showthread.php?t=1376344). But the bad news is that you cannot try any of the nightlies of CM9 or the deliciousness of ICS (Ice Cream Sandwhich).
This can be overcome by installing new baseband, which involves installing a new stock rom of Gingerbread. It is not as simple as flashing a zip so the easiest of the guides I found is this one (http://forum.xda-developers.com/showthread.php?t=1301489). I personally recommend you upgrade to new baseband and let me know if you don't understand the process.
Here are some good ROMs for O1 is found.
AOKP (4.4) (New Baseband) (http://forum.xda-developers.com/showthread.php?t=1613712)
Mik_OS Rom (2.3.7) (Old Baseband) (http://forum.xda-developers.com/showthread.php?t=946354)
SlimGen v1.6.0 (2.3.7) (Old/New Baseband) (http://forum.xda-developers.com/showthread.php?t=1463495)
These are some of the few of the many great ones. I currently upgraded to new baseband and am rocking AOKP and so far, I'm speechless by the CM9 awesomeness. I hope I helped. Please click the thank you button if I helped.
Balls69 said:
What method is that? And how do I start? I am a completely noob, so a guide or something would be nice. Or you can explain me yourself, but please. Dont assume that I know anything, because I dont. Hehe
Click to expand...
Click to collapse
before upgrading your phone u have to do three things
1.root your phone
2.install a custom recovery
3.update your baseband
for
1.use unlockroot tool download from unlockroot.com
http://www.unlockroot.com/guide.htm
2.download rom manager from market ...it have a option to install cwm recovery
(it is a custom recovery which will help you in installing custom rom.....)
3.use this guide to upgrade your baseband
http://forum.xda-developers.com/showthread.php?t=1149530
you have to download v20g..
after that you are ready to install new rom in your phone
download any rom
put in your sdcard root
switch off your phone
switch on your phone while pressing (vol.down+home)
this will boot you into recovery
after that
wipe everything...(format data /cache/system/boot/sdext)(do not format sdcard)
and install zip from sdcard
and choose the file
you have downloaded
thats it
reboot
Error
After I followed this guide it gave me an error.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is it something wrong with my phone? Everytime I have tried to updated it, there is always an error. Its like my phone is connected, but not properly connected. I have tried to update it with lg's software on 4 different computers.
And when I choose mass-storage. I still dont find my device under "My computer". But when I plug it in to the computer, it gives the normal sound. And all the drivers are installed correctly
Balls69 said:
After I followed this guide it gave me an error.
Is it something wrong with my phone? Everytime I have tried to updated it, there is always an error. Its like my phone is connected, but not properly connected. I have tried to update it with lg's software on 4 different computers.
And when I choose mass-storage. I still dont find my device under "My computer". But when I plug it in to the computer, it gives the normal sound. And all the drivers are installed correctly
Click to expand...
Click to collapse
the guide is write and i think there is a problem in your drivers
have you enabled usb debugging in your mobile...nd for safety check the stay awake button nd try again

Unable to update to 1.27.531.8 {SOLVED}

I am stock rooted and didn't modify a single thing. The only thing I did was flash TWRP recovery because I was planning on flashing ROMS but I eventually decided to stick to stock rooted so I reflashed the stock recovery. I received the update a week ago and proceeded to install it. However, it seems to fail. When the phone boots into stock recovery it attempts to install the update but at about a 3rd of it's progress it immediately stops and all that is displayed on the screen is a phone flat down with a red triangle and exclamation mark inside it. I've tried searching about this but everything I find leads me to the One X and I've never owned that phone so I'm not sure how similar they really are. Does anyone know why this is happening? Would it possibly be due to a corrupted recovery file within my download source? Any help would greatly be appreciated.
Thanks in advance.
Anyone?
LuigiBull23 said:
I am stock rooted and didn't modify a single thing. The only thing I did was flash TWRP recovery because I was planning on flashing ROMS but I eventually decided to stick to stock rooted so I reflashed the stock recovery. I received the update a week ago and proceeded to install it. However, it seems to fail. When the phone boots into stock recovery it attempts to install the update but at about a 3rd of it's progress it immediately stops and all that is displayed on the screen is a phone flat down with a red triangle and exclamation mark inside it. I've tried searching about this but everything I find leads me to the One X and I've never owned that phone so I'm not sure how similar they really are. Does anyone know why this is happening? Would it possibly be due to a corrupted recovery file within my download source? Any help would greatly be appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Did you relock bootloader?
Sent from my HTC One using Xparent Skyblue Tapatalk 2
Mine is unlocked and the update worked fine. You just need the stock Tmo recovery to make it work.
mrmytouch said:
Mine is unlocked and the update worked fine. You just need the stock Tmo recovery to make it work.
Click to expand...
Click to collapse
That's the thing.. I do have the TMO stock recovery. Unless you can provide me with another link, the one I downloaded doesn't seem to work at all and I've redownloaded numerous times. I still get that triangle..
Link to stock tmobile recovery is here
I got it from this thread
mrmytouch said:
Link to stock tmobile recovery is here
I got it from this thread
Click to expand...
Click to collapse
Thanks man. much appreciated. I will try this one out and see how it goes.
LuigiBull23 said:
Thanks man. much appreciated. I will try this one out and see how it goes.
Click to expand...
Click to collapse
Did it work out for you mate?
mrmytouch said:
Did it work out for you mate?
Click to expand...
Click to collapse
My apologies. I completely forgot to report back to this.. YES, all is well now. Not sure why the other recovery didn't work as it did work for others but guess that doesn't matter now. Thanks a lot for your help. Much appreciated.
I used this recovery, and it completely wiped my phone and all my stuff was gone. And it still didn't install the update. Is that normal?
Sent from my HTC One using xda app-developers app
bestofrhcp said:
I used this recovery, and it completely wiped my phone and all my stuff was gone. And it still didn't install the update. Is that normal?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Sounds more like a bootloader issue...
bestofrhcp said:
I used this recovery, and it completely wiped my phone and all my stuff was gone. And it still didn't install the update. Is that normal?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Yes when you flash recovery I believe it will Wipe your sd card. But your stuff should be on your gmail account though at least your phone numbers. You need to give us more info. Are you on stock t mo rom?
mrmytouch said:
Yes when you flash recovery I believe it will Wipe your sd card. But your stuff should be on your gmail account though at least your phone numbers. You need to give us more info. Are you on stock t mo rom?
Click to expand...
Click to collapse
As far as I'm aware unlocking the bootloader or flashing an RUU are the ONLY things that wipe your storage. Flashing recoveries doesn't touch it except for adding in the necessary files to function properly.
LuigiBull23 said:
As far as I'm aware unlocking the bootloader or flashing an RUU are the ONLY things that wipe your storage. Flashing recoveries doesn't touch it except for adding in the necessary files to function properly.
Click to expand...
Click to collapse
I really cant remember if it did or did not when I flashed the recovery but in post #8 he said it wiped his sd. I could be wrong though. Just trying to help this guy out. I do know unlocking bootloader does wipe your sd though so i'm sure your right I just cant remember.
:| is the update supposed to go "reboot, recovery, blue bar moving along HALT reboot, recovery bigger loading blue bar, STOP dead, Red triangle"
ive tried it 3 times no luck.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ive Locked and reset the tamper flag with revone still wont install the OTA
its no so much I WANT the update as much as i WANT my phone to stop buggin me about the damn update XD
ive followed the thread linked above and tried all methods provided. no luck so im sure im doing something horrificaly wrong XD
all i can provide is this,
Verifying curent system...
assert failed: apply_patch_check("/system/build.prop", "5c450bd35b662fa55d667bda7463960e2eb669c
5", "48daa0113456b06b44b52c1b777d7d2e49af1196")
Instalation aborted.
soo all i got was something is up with the build prop that it dosnt like... as for the other randomness hell if i know.
its weird though as ive never rooted the phone. i just unlocked bootloader to get a custom recovery on it so i could make backups of my entire phone.
and flash that one mod that gets rid of the 3 dot bar.
Heres the build prop paste bin
http://pastebin.com/cT1sZ73K
Sieze said:
:| is the update supposed to go "reboot, recovery, blue bar moving along HALT reboot, recovery bigger loading blue bar, STOP dead, Red triangle"
ive tried it 3 times no luck.
ive Locked and reset the tamper flag with revone still wont install the OTA
its no so much I WANT the update as much as i WANT my phone to stop buggin me about the damn update XD
ive followed the thread linked above and tried all methods provided. no luck so im sure im doing something horrificaly wrong XD
all i can provide is this,
Verifying curent system...
assert failed: apply_patch_check("/system/build.prop", "5c450bd35b662fa55d667bda7463960e2eb669c
5", "48daa0113456b06b44b52c1b777d7d2e49af1196")
Instalation aborted.
soo all i got was something is up with the build prop that it dosnt like... as for the other randomness hell if i know.
its weird though as ive never rooted the phone. i just unlocked bootloader to get a custom recovery on it so i could make backups of my entire phone.
and flash that one mod that gets rid of the 3 dot bar.
Heres the build prop paste bin
http://pastebin.com/cT1sZ73K
Click to expand...
Click to collapse
Are you even on stock recovery?
LuigiBull23 said:
Are you even on stock recovery?
Click to expand...
Click to collapse
technicly yea XD i flashed the latest stock recovery and being as my phone wasnt OTA'd to the 4.2.2 its recovery was from the 4.2.2 but the rest of the phone wasnt. unless i can get my hands on the stock recovery from my phone im **** out of luck and will be forever stuck with the red triangle of ass... its at times like this i regret my haste and stupidity XD
just tryed again and now its spitting out that assert failed for system/app/settings.apk

How to install CWM without USB

Hi Fellas.
I've got recently Galaxy s2.
It has old OS (2.3.5)
I would like to install CianogenMod10.2 or something similar.
The problem with this phone - It has completely broken usb socket. I charge the battery exernally.
I cannot use built-in bootloader, which works with Odin - because , again, usb is not working.
It also has some other bootloader (Powerup +Select button +volume UP) - which looks like CWM - but it's not CWM - because phone has stock firmware from Orange mobile company. This loader has even option to install zip from SD card - But when I try to install cm-10.2-20130824-NIGHTLY-i9100.zip ( latest cianogenmod) - it gives an error - that image is NOT SIGNED.
Is there anything I can do ?
Please advice
junglemike said:
Hi Fellas.
I've got recently Galaxy s2.
It has old OS (2.3.5)
I would like to install CianogenMod10.2 or something similar.
The problem with this phone - It has completely broken usb socket. I charge the battery exernally.
I cannot use built-in bootloader, which works with Odin - because , again, usb is not working.
It also has some other bootloader (Powerup +Select button +volume UP) - which looks like CWM - but it's not CWM - because phone has stock firmware from Orange mobile company. This loader has even option to install zip from SD card - But when I try to install cm-10.2-20130824-NIGHTLY-i9100.zip ( latest cianogenmod) - it gives an error - that image is NOT SIGNED.
Is there anything I can do ?
Please advice
Click to expand...
Click to collapse
you can try to flash philz kernel. search in original android development section
Sent from my GT-I9100 using xda app-developers app
@junglemike - if u have a broken usb ...i seriously suggest u not to try cm10.2
if recovery doesnt works (like 2 nightlies before) u will be doomed.
I will check this out.
This is a boot loader that I have apart from stock recovery mode:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm not sure what it is.
Not sure if this helps.
junglemike said:
I will check this out.
This is a boot loader that I have apart from stock recovery mode:
I'm not sure what it is.
Not sure if this helps.
Click to expand...
Click to collapse
this is the stock android recovery present only wid stock roms.. not present in cm..it will be overwritten by cwm recovery
doctor_droid said:
this is the stock android recovery present only wid stock roms.. not present in cm..it will be overwritten by cwm recovery
Click to expand...
Click to collapse
Thanks.
I understand the risks, I could install stable CM 10 version, or some other stable version.
If only I could figure out hot to install CWM...
junglemike said:
Thanks.
I understand the risks, I could install stable CM 10 version, or some other stable version.
If only I could figure out hot to install CWM...
Click to expand...
Click to collapse
just find the philz kernel zip that can be flashed from stock recovery then flash neatrom. reboot. than flash cm10 or whatever you want
Sent from my GT-I9100 using xda app-developers app
hacklana said:
just find the philz kernel zip that can be flashed from stock recovery then flash neatrom. reboot. than flash cm10 or whatever you want
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I have tried what you suggested:
I downloaded and tried to flash PhilZ touch 3.0.0 temporary flash (file: philz-touch_3.00_i9100-signed.zip)
But it gives me same error: cannot verify the signature.
What I am missing.
Some more questions, sorry if they are too basic
1) PhilZ-cwm6 - Safe Stock Based Kernel - there are many kernels. Which one to choose? This is kernel info of my phone, if it helps:
2) Suppose I succeed to flash PhiZ, why do you suggest to flash neatrom first? why not CM10 right away?
Dear @junglemike,
There is no Philz kernel for gingerbread. Nor will any temporary CWM work on GB!
The way I see it, messing with a phone having a bad USB port is like playing with fire. If something goes wrong, you will have to resort to flashing via Odin (which u can't).
So I suggest you repair the USB port (you can do it yourself too) first.
"To err is human, to forgive is divine."
Sent from my SGS II
Yep. You're nuts messing with your phone with a busted USB port. If anything goes even slightly badly, and it does for almost everyone at some stage, you won't be fixing it.
I am starting to think that you are right.
By the way, friend gave me this phone, because he dropped it in a water, and USB never worked after that. I verified that it is not a bad contact issue. I checked with a tester that all 4 contacts are getting through to the motherboard. Probably some chip got burned when when that friend connected charger when phone was still wet.
I just wanted to upgrade because this jingerbread looks really ugly.
I guess I will stay with that anyway.
Is there any app to replace that ugly unlock screen at least? With something similar to jb4.2 ? I mean a enter point that you move from the. Enter to the right to unlock the phone
Sent from my Galaxy Nexus using Tapatalk 2
I've used widgetlocker before with success. Buy the app and then look on xda for widgetlocker themes, there's literally hundreds
Sent from a galaxy far, far away
junglemike said:
I am starting to think that you are right.
By the way, friend gave me this phone, because he dropped it in a water, and USB never worked after that. I verified that it is not a bad contact issue. I checked with a tester that all 4 contacts are getting through to the motherboard. Probably some chip got burned when when that friend connected charger when phone was still wet.
I just wanted to upgrade because this jingerbread looks really ugly.
I guess I will stay with that anyway.
Is there any app to replace that ugly unlock screen at least? With something similar to jb4.2 ? I mean a enter point that you move from the. Enter to the right to unlock the phone
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
why not update OTA?

Categories

Resources