Hello everyone,
I have a a micromax a56 ninja2 , and would like to root and work on the same , as i am currently a huge fan of android, but in vain, this phone is not visible in Adb devices, below are the things which i have already tried, also i have called micromax and got a ver silly answer to enable the debugging mode ( which i did at the intial stage itself)
Things i performed :
Enabled USB debugging mode , the phone is accessible for USB data transfer but whenever i type adb devices its blank.,
Adb kill - server and start server dint helped
Removed all the USB drivers using USBdbview.exe, and installed the drivers from the micromax site and also available on the XDA website ( A56 drivers), the drivers installed but the adb devices were still empty.
Backed up the android_winusb.inf and saved the file with Hardware ID's available in device manager ( PID and VID)
Still no luck,
Phone was restarted and enabled again the debugging mode. no luck
One of the website told to copy the adb_usb.ini on the users profile, did that still dint worked.
Any help would be really appreciated/
I am quite frustrate now , as i really wanna root my phone
Hey i am not an expert, but i'll tell u what i did,
When u connect ur phone to ur pc, it asks for driver installation, which are present within the phone, just install those drivers and ur phone will be shown in adb devices, then go to www,unlockroot,com, rest help u can figure out from there. U just have to download the free software, click unroot first then root again.
Sent from my A56 using xda app-developers app
a56 root
Try this link, but install drivers from ur phone directly, bcuz drivers are not availaible on net
http://forum.xda-developers.com/showthread.php?t=1829389
Related
Hello everyone,
I have a a micromax a56 ninja2 , and would like to root and work on the same , as i am currently a huge fan of android, but in vain, this phone is not visible in Adb devices, below are the things which i have already tried, also i have called micromax and got a ver silly answer to enable the debugging mode ( which i did at the intial stage itself)
Things i performed :
Enabled USB debugging mode , the phone is accessible for USB data transfer but whenever i type adb devices its blank.,
Adb kill - server and start server dint helped
Removed all the USB drivers using USBdbview.exe, and installed the drivers from the micromax site and also available on the XDA website ( A56 drivers), the drivers installed but the adb devices were still empty.
Backed up the android_winusb.inf and saved the file with Hardware ID's available in device manager ( PID and VID)
Still no luck,
Phone was restarted and enabled again the debugging mode. no luck
One of the website told to copy the adb_usb.ini on the users profile, did that still dint worked.
Any help would be really appreciated/
I am quite frustrate now , as i really wanna root my phone
I have got Miromax A57 Ninja 3 recently
Searched and tried continuously for 2 weeks but got nothing working for rooting Micromax A57
Guys please help me out on this the phone performs great but root is needed to unlock its real potential,.......
Please help me out on this
Ya,, plz help to root this device ...
Sent from my Micromax A57 using xda app-developers app
ADB not showing the device
I am unable to use unlockroot or superone click because ADB is not showing my device in the device list....
Whereas device manager is showing ADB composite device under Android Devices Developers plzzzz help :crying:
Rooted The New MIcromax Ninja 3 A57
Finally Rooted the New MIcromax Ninja 3 A 57
Will Upload the step by step process soon.....:laugh:
Waiting for ur post buddy.. good work...:thumbup:
Sent from my Micromax A57 using xda app-developers app
newbie_a57 said:
Finally Rooted the New MIcromax Ninja 3 A 57
Will Upload the step by step process soon.....:laugh:
Click to expand...
Click to collapse
hey pls provide method to root a52 also. pls pls pls pleaseer
Sent from my LG-P500 using xda app-developers app
Guide to Unlock/Root Micromax A_57 Ninja 3
I am not responsible for any damage to your device mine worked perfectly fine
All the files are in zip file attached (kit_extractme.zip)
I am assuming that u ha basic knowledge of ADB and sdk
Ok here's how i got my A 57 rooted
Please remember to enable usb debugging on your device
Steps:
1. Remove/Uninstall all previous drivers for micromax a 57.
2.Connect the Device let windows install drivers it can then it will not be able to install some drivers.
3. After that an autorun prompt would appear for installation of the usb driver run that then all d drivers woud be installed and you will see ADB Composite interface under Android Devices in the Device Manager.
(If the autorun prompt does not appear Download the device drivers from micromax site and right click micromax A 57 under other device and browse to that folder and install the drivers)
4. now Go to C:\Users\your_username\.android folder there extract and paste the attached file adb_usb.ini that i have attached with the post.
NOte the file contains the vendor id of the device i guess it is same for all a57 but to confirm right click ADB composite interface goto properties> details> select Hardware Id's and find ur vendor id there as in the image attached If it is different then replace that in the adb_usb file
5.now open cmd as administrator and cd to you adb folder (in android sdk it is in platform tools download only adb from internet)
6. now give command adb start-server
then adb devices
it should now list your device as Micromax-a56 (see image adb_1) ( I don't know y it says micromax a56)
now download unlockroot from its website or google its offline installer
Now open Unlock root install it and then start it
Now press the "Root" button
It will get online device and ask you to select now Micromax A57
Select the device then it will say the device is already rooted you still want to root ???
but you continue and click yes
It will then root your device
and here you are your ohone is now rooted
Install superuser and SuperSU from play store
Now do whateva you want..................................
***************************************************
Please hit thanks if it was helpful
Lets see whether this work or not...
Sent from my Micromax A57 using xda app-developers app
not working
not able to find adb composite interference for micromax a57.if we run cmd as in forum not listed in adb.eventhough i hacked s2,s advance easy and simple.plz help or post some tutorial video for rooting this devices...plzzzz:crying:
---------- Post added at 09:17 PM ---------- Previous post was at 08:37 PM ----------
ya i run cmd and enter adb devices.it shows list of attached devices no name below.now what can i do???
ANSWER The following
have you Correctly placed adb_usb.ini in .android folder???
and wether windows have recognized it as ADB Composite interafce....??
..
yes i did steps 1 by 1 as u told.i tried this again and again.no use.it didn show my device name micromax a57
---------- Post added at 11:52 PM ---------- Previous post was at 11:23 PM ----------
ya i copied to user/.android.still it didnt show no device in tat adb.and also i checked in device manager..android adb composite not shown????
newbie_a57 said:
I am not responsible for any damage to your device mine worked perfectly fine
All the files are in zip file attached (kit_extractme.zip)
I am assuming that u ha basic knowledge of ADB and sdk
Ok here's how i got my A 57 rooted
Please remember to enable usb debugging on your device
Steps:
1. Remove/Uninstall all previous drivers for micromax a 57.
2.Connect the Device let windows install drivers it can then it will not be able to install some drivers.
3. After that an autorun prompt would appear for installation of the usb driver run that then all d drivers woud be installed and you will see ADB Composite interface under Android Devices in the Device Manager.
(If the autorun prompt does not appear Download the device drivers from micromax site and right click micromax A 57 under other device and browse to that folder and install the drivers)
4. now Go to C:\Users\your_username\.android folder there extract and paste the attached file adb_usb.ini that i have attached with the post.
NOte the file contains the vendor id of the device i guess it is same for all a57 but to confirm right click ADB composite interface goto properties> details> select Hardware Id's and find ur vendor id there as in the image attached If it is different then replace that in the adb_usb file
5.now open cmd as administrator and cd to you adb folder (in android sdk it is in platform tools download only adb from internet)
6. now give command adb start-server
then adb devices
it should now list your device as Micromax-a56 (see image adb_1) ( I don't know y it says micromax a56)
now download unlockroot from its website or google its offline installer
Now open Unlock root install it and then start it
Now press the "Root" button
It will get online device and ask you to select now Micromax A57
Select the device then it will say the device is already rooted you still want to root ???
but you continue and click yes
It will then root your device
and here you are your ohone is now rooted
Install superuser and SuperSU from play store
Now do whateva you want..................................
***************************************************
Please hit thanks if it was helpful
Click to expand...
Click to collapse
how much ram u had before and after rooting how much ram u have now?
unable to get online device with the unlock roo
my device listed as a56 but unable to get online device with unlock root plss help me
we have to install jdk also.i have to try the process again
Sent from my Micromax A57 using xda app-developers app
unable to get online device with the unlock root
my device listed as a56 but unable to get online device with unlock root plss help me
rooting A57
newbie_a57 said:
Finally Rooted the New MIcromax Ninja 3 A 57
Will Upload the step by step process soon.....:laugh:
Click to expand...
Click to collapse
please upload,I just purchasedA57 today,& wants to root.Thanks in advance,......
Root require of Qmobile A2
Hey every one i am new here so i am searching for rooting method for my Qmobile A2 it has MT6575 chipset 1ghz processor 256mb ram 512mb rom power sgx531t gpu chip android 2.3.6 i use superone click, unlock root app but both give error on shell root require (( so plz help me in rooting my cell phone thanks
please provide link for a57 driver
please provide direct link for micromax a57 drivers.i cant find it at official site.
thank you.
thx
Thanks you very much it worked:good:
Thanks for providing rooting method,today I have successfully rooted my A57.
Now expecting CWM recovery from u for A57, I believe u can build it.Thanks again!!!!!
Sent from my Micromax A57 using xda app-developers app
hey. i have canvas nitro smartphone....when i connect it to my pc...it shows three option 1.media device
2. camera
3.charge only
but there is no mass storage option....and thats why i am unable to access external sd card.....bt i know i can access it through media device option....bt i want android logo when we connect it to pc and it says to turn on mass storage......plz help
sorry brother !
vicky.... said:
hey. i have canvas nitro smartphone....when i connect it to my pc...it shows three option 1.media device
2. camera
3.charge only
but there is no mass storage option....and thats why i am unable to access external sd card.....bt i know i can access it through media device option....bt i want android logo when we connect it to pc and it says to turn on mass storage......plz help
Click to expand...
Click to collapse
that option is no longer available with android kitkat stock rom for canvas nitro
altough it is available in the android l themed rom by pinto
you can try to flash that rom if you desperately want that feature
okay.....i can access storage through media device option in my pc......but if i want to access storage through media device option in Samsung led tv...it unable to access.....so in pc its okay....but in tv i cant......any alternative?
I am unble to use MTP option in my XP , my conputer is unable to install MTP Device Drivers
I have downlaoded official drivers but its not working
Please help, any suggestion how to connect with my pc using MTP option?
Sent from my Micromax A311 using XDA Free mobile app
Need help with Mtp
Same here some how im rooted my a310 and uninstall some key module app using system app remover. But the n everything working fine without mtp. Its says driver software not installed successfully . I tried many driver cant find solution. I chaked meidia storage and force it stop and disable and enable it still not working MTP. I think i deleted some of storage key module app. But which one i don't know ... Need help
bangarawa said:
I am unble to use MTP option in my XP , my conputer is unable to install MTP Device Drivers
I have downlaoded official drivers but its not working
Please help, any suggestion how to connect with my pc using MTP option?
Sent from my Micromax A311 using XDA Free mobile app
Click to expand...
Click to collapse
MTP not works in Windows xp
You need to install Windows 7 or later in ur PC
hello,
I previously was using HTC explorer and had many great experience of rooting and changing custom ROMs setting up of adb was easy with it but currently I own a dell venue 7 3740 LTE tablet which is having KitKat 4.4.4 I have a HP laptop with windows 7 ultimate I want to start using adb in command prompt so that I can do lagcat and capture ota updates link also I want to use adb so that some apps which needs root but can be used via some tweaks done in adb eg.helium,screen shot ultimate etc.
please help me how to setup adb in my laptop.
Have you tried installing the Intel Android USB Drivers?
xBIGREDDx said:
Have you tried installing the Intel Android USB Drivers?
Click to expand...
Click to collapse
That one works amazingly well fixed my fastboot driver on windows 10
social-design-concepts said:
That one works amazingly well fixed my fastboot driver on windows 10
Click to expand...
Click to collapse
But Its not working for me.
http://forum.xda-developers.com/general/xda-assist/dell-venue-7-3740-mtp-usb-debug-problem-t3173463
xBIGREDDx said:
Have you tried installing the Intel Android USB Drivers?
Click to expand...
Click to collapse
yes I have installed the v1.9.0 setup in device manager in laptop when I connect my tab with debugging enabled it shows in portable device my tab name,and other device mtp is shown with yellow exclamation.
mtp drivers for tab are not getting installed.
in cmd when I hit adb devices I don't get my tab details
Does it show like the pictures in my link ????
Dipyaman said:
Does it show like the pictures in my link ????
Click to expand...
Click to collapse
yes its shows yellow error in mtp but I am able to transfer files from laptop and tablet only thing is I can't use cmd and adb but after going thru your link I come to know that my adb was too old which is of my HTC explorer so I downloaded adb (platform.zip) from the thread given in your post and then for mtp I manually selected driver installed in my laptop I.e adb interface >Samsung adb and then I tried cmd in new platform.zip which had updated adb files for jellybean+ version and now its working fine.
Dunno how you did that. I'm a newbie.
Could you plz help me out ?
I don't have any sort of "Adb" connection in device manager (which you can see in my image), which was supposed to be there.
Can you give me a detailed explanation of what you did ????
Dipyaman said:
Dunno how you did that. I'm a newbie.
Could you plz help me out ?
I don't have any sort of "Adb" connection in device manager (which you can see in my image), which was supposed to be there.
Can you give me a detailed explanation of what you did ????
Click to expand...
Click to collapse
so you too also want adb to work for you right?
I can't say exactly what made it work for me cause I have s duos 2 also n so its drivers are also installed in my lappy.
but you do one thing
1.install Intel android driver from above post v1.9.0
2.enable debugging in tablet and connect and then goto device manager where you have mtp error,right click on mtp,update drivers select from folder will appear below that must be some option select from installed drivers goto that see Intel android driver after that you will be getting multiple option android adb interface, adb composite interface select any one preferably android adb interface and install.after that uncheck debugging and again check it and see if mtp error is gone from device manager.
3.download platform.zip from your given thread link unzip it and in that folder open cmd by holding shift and right click do open cmd here and check if all is OK by typing adb devices,if its OK it will list your device.
I'll give it a try, then i'll inform you. Till then, please stick to the post ! Thank you for the info BTW.
Dipyaman said:
I'll give it a try, then i'll inform you. Till then, please stick to the post ! Thank you for the info BTW.
Click to expand...
Click to collapse
today I tried changing from samsung adb driver with Intel adb driver and it worked
djmacpro said:
today I tried changing from samsung adb driver with Intel adb driver and it worked
Click to expand...
Click to collapse
The problem is, Installing Intel USB drivers does not do anything. Its does not show up in my device manager.
Dipyaman said:
The problem is, Installing Intel USB drivers does not do anything. Its does not show up in my device manager.
Click to expand...
Click to collapse
if still yellow error is shown on device manager right click on it update driver,then browse from folder or look for installed driver some where is must be there search something related to Intel or adb and select that else forget it cause what's the use of adb for us as there is no custom ROM or other things to do.
other way is download helium app on PC and tablet and in ptp mode you can get adb working
Hello!
I have recently bought this phone with installed custom ROM and I wanted to install another one. And then I downloaded the ROM and formatted the phone from TWRP and I just connected it to the PC and there was nothing.. I searched for hours I tried so many adb drivers, usb drivers, etc and I couldn't detect the phone in the ADB powershell nor transfer any files. The only progress I managed to do is side loading it.. The ADB detected it and then I tried adb push (the exact name of the file) /sdcard and after that (error: closed) appeared.. I think the main reason is because before I formatted the phone I didn't allow the usb debuging but apparently you can't allow it from the recovery... I don't have any type-c OTGs laying around.. How in the world am I supposed to transfer the ROM to my phone? Please help me! Thank you!
way2easy said:
Hello!
I have recently bought this phone with installed custom ROM and I wanted to install another one. And then I downloaded the ROM and formatted the phone from TWRP and I just connected it to the PC and there was nothing.. I searched for hours I tried so many adb drivers, usb drivers, etc and I couldn't detect the phone in the ADB powershell nor transfer any files. The only progress I managed to do is side loading it.. The ADB detected it and then I tried adb push (the exact name of the file) /sdcard and after that (error: closed) appeared.. I think the main reason is because before I formatted the phone I didn't allow the usb debuging but apparently you can't allow it from the recovery... I don't have any type-c OTGs laying around.. How in the world am I supposed to transfer the ROM to my phone? Please help me! Thank you!
Click to expand...
Click to collapse
Okey, I just managed to use adb push without side loading just in the twrp and I don't know how to delete the post so excuse me for the spam!
Heyyo, I'm the maintainer of official builds of TWRP for the LeEco Le Max 2.
Usually for TWRP it can sometimes mess up USB mode if the device is plugged into a PC before it fully boots to TWRP.
Windows for some reason messes up the driver install for MTP as well. Usually of this happened you will need to manually go into device manager and select update driver on it and manually select the driver to install like this:
https://photos.app.goo.gl/nRYfpAZ0i50GuM512