For Att Compatible Phones:
Find below the values needed to update your device data settings to be able to send MMS* and connect to the Internet via your Browser:
1. CREATE A NEW APN (ACCESS POINT NAME). ENTER ONLY THE SETTINGS LISTED BELOW:
FIELD SETTINGS
NAME straight talk
APN att.mvno
PROXY proxy.mvno.tracfone.com
PORT 80
MMSC http://mmsc.cingular.com
MMS PROXY 66.209.11.33
MMS PORT 80
2. SELECT THE APN YOU JUST CREATED.
3. DELETE THE OLD APN FROM YOUR PHONE IF POSSIBLE.
Tmobile Compatible settings
FIELD SMARTPHONE SETTINGS ALL OTHER PHONES
NAME straight talk straight talk
APN wap.tracfone wap.tracfone
PROXY leave blank 216.155.165.40
PORT 8080 8080
MMSC http://mms.tracfone.com http://mms.tracfone.com
MMS PROXY leave blank 216.155.165.40
MMS PORT leave blank 8080
Here is an interesting development... I flashed CyanogenMod 10 on my Sony Xperia arc S phone and the ROM downloaded some settings by itself. There are 3 APNs that comes with this ROM.
1. ATT
2. ATT LTE
3. StraightTalk ATT
StraightTalk was picked by default. I was about to delete them all and enter the settings from here but then I received a text message from a friend... Lo and behold, it was a MMS message with a pic attached and already downloaded. I saw that my WiFi was on, so I turned off the WiFi and asked my friend to send me more pics... They all arrived including a video snippet.... Then I sent one, a larger pic, and he received it. All amazed I fired up the CM10's browser and went to www.testmy.net Did a smarttest and my download was 3.4 Mbps and upload was 577 Kbps... In Phoenix, AZ...
Here are the settings that came with CM10 ...
Name: StraightTalk ATT
APN: att.mvno
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMSC proxy: 66.209.11.33
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: Not set
APN type: default,supl,mms
APN protocol: IPv4
APN enable/disable: APN enabled (tick mark checked but grayed out anyways)
Bearer: Unspecified
Does this make any sense now?
That's the settings I use for straight talk, works great. I get 4g just about everywhere here in pa. Mms works great too. I've had straight talk for a year and a half on at&t. Can't complain. If you use alot of cell data they will throttle you slow, but I'm usually close to wifi. I've heard 2GB then they slow you down.
Sent from my PantechP9070 using xda app-developers app
Bushmaster78FS said:
Here is an interesting development... I flashed CyanogenMod 10 on my Sony Xperia arc S phone and the ROM downloaded some settings by itself. There are 3 APNs that comes with this ROM.
1. ATT
2. ATT LTE
3. StraightTalk ATT
StraightTalk was picked by default. I was about to delete them all and enter the settings from here but then I received a text message from a friend... Lo and behold, it was a MMS message with a pic attached and already downloaded. I saw that my WiFi was on, so I turned off the WiFi and asked my friend to send me more pics... They all arrived including a video snippet.... Then I sent one, a larger pic, and he received it. All amazed I fired up the CM10's browser and went to www.testmy.net Did a smarttest and my download was 3.4 Mbps and upload was 577 Kbps... In Phoenix, AZ...
Here are the settings that came with CM10 ...
Name: StraightTalk ATT
APN: att.mvno
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMSC proxy: 66.209.11.33
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: Not set
APN type: default,supl,mms
APN protocol: IPv4
APN enable/disable: APN enabled (tick mark checked but grayed out anyways)
Bearer: Unspecified
Does this make any sense now?
Click to expand...
Click to collapse
I'm getting 1.3Mbps down and 657 Kbps up. Pretty happy with it.
To the last poster, I thought Straight Talk didn't offer LTE coverage?! If it did, it'd be an even more amazing deal than I had thought it was!
My data works fine. Got like 6mbps this morn but my MMS wont send for ****. Using an Xperia Ion
Pantech Pocket ATT - Straight Talk MMS Settings
The Pantech Pocket needs to have the Straight Talk APN data loaded to TWO locations.
Both Phone APN and Wap APN need to be setup with the Straight Talk APN settings.
Straight Talk makes it sound like you only need to enter the information in one location.
You need to enter the information in Phone APN and Wap APN, if you want MMS to work!
APN name: Straight Talk
APN: att.mvno
Proxy: Straight Talk value
Port: 80
MMSC: Straight Talk value
MMS Proxy: 66.209.11.33
MMS Port: 80
My Pantech Pocket is running flawlessly on Straight Talk now. MMS is 100% functional. The pictures are getting through. I'm getting 5Mbps download speed and 1Mbps upload speed.
My Pantech burst uses only one apn. On gingerbread and ice cream sandwich. I don't run proxy but the rest of the settings I put in and works good. Seems faster tried it. 40kbps proxy vs 4000kbps no proxy. Not sure why. Any ideas?
Sent from my PantechP9070 using xda app-developers app
HOLY SH!T!!!
I just put in the settings Bushmaster78FS posted and I am now on TRUE 4G with ST. 6Mbps!!! ITS FASTER THAN MY WORKS WIFI BY 3X!!!
AMAZING!!! THANKS BUSHMASTER!
Nice
Thanks for the settings you posted Bushmaster.
The settings provided are the first ones I have used and successfully got both data and mms working with only one APN.
Using Samsung Galaxy S III.
1. My phone is unocked and compatible on both AT&T networks and T-Mobile right now i am using an blue AT&T sim and i am thinking to make the move to T-Mobile network. Do you think i can use the same AT&T compatible sim and just change the APN setting to T-Mobile and have it work on the T-Mobile network or so i have to buy a sim?
2. I heard that you can get a free sim by buying a free phone and just using it on your phone but other people say that those sims are lock to those phones. Which is true?
3. I see that Straight talk sells cheap GSM phones and my GF has her phone on T-Mobile so can i buy one of the ST phones and swap it to use on T-Mobile or are the locked and can they be unlocked?
I just switched from the default straight talk apn to the ones bushmaster posted. I went from 1 mbps to 4.8 on a Nexus 4.
Bushmaster78FS said:
Here is an interesting development... I flashed CyanogenMod 10 on my Sony Xperia arc S phone and the ROM downloaded some settings by itself. There are 3 APNs that comes with this ROM.
1. ATT
2. ATT LTE
3. StraightTalk ATT
StraightTalk was picked by default. I was about to delete them all and enter the settings from here but then I received a text message from a friend... Lo and behold, it was a MMS message with a pic attached and already downloaded. I saw that my WiFi was on, so I turned off the WiFi and asked my friend to send me more pics... They all arrived including a video snippet.... Then I sent one, a larger pic, and he received it. All amazed I fired up the CM10's browser and went to www.testmy.net Did a smarttest and my download was 3.4 Mbps and upload was 577 Kbps... In Phoenix, AZ...
Here are the settings that came with CM10 ...
Name: StraightTalk ATT
APN: att.mvno
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMSC proxy: 66.209.11.33
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: Not set
APN type: default,supl,mms
APN protocol: IPv4
APN enable/disable: APN enabled (tick mark checked but grayed out anyways)
Bearer: Unspecified
Does this make any sense now?
Click to expand...
Click to collapse
hey, so i been messing around a bit with everything and i think i found one that is faster: for
username: [email protected]
password: CINGULAR1
apn type: default,supl,mms,hipri
all others are the same i just added these and i feel (maybe placebo effect) its faster like almost 1.5mb.
the username n password i got from the att apn and hipri i guess means high priorty connection. need conformation tho works with n4
APn for Straight Talk on Pantech Breeze 3
shinb said:
hey, so i been messing around a bit with everything and i think i found one that is faster: for
username: [email protected]
password: CINGULAR1
apn type: default,supl,mms,hipri
all others are the same i just added these and i feel (maybe placebo effect) its faster like almost 1.5mb.
the username n password i got from the att apn and hipri i guess means high priorty connection. need conformation tho works with n4
Click to expand...
Click to collapse
I have a unlocked AT&T Pantech Breeze 3 with a Straight Talk sim in it. Am unable to access the web. All my settings still go to AT&T.
Does anyone know the correct APN settings?
I have to go 3 places to do the setups.
# 1 Messaging > Settings > Multimedia > MMS Settings
There I can enter Profile Name: MMSC: Connection Type: Proxy Address:& Proxy Port.
Does anyone know the correct values to put in here?
# 2 My Stuff > Applications > Browser > Manage > Profiles
Profile Name : Home URL: Connection Type : Proxy Address: Proxy Port
# 3 Settings > Network Connectivity > Connection Name > APN : Primary & secondary DNS : Linger Time : Authentication: Username :
Password
Does anyone know the correct values that I need to put in here in order to get my phone to go to the web.
I ha ve voice mail, can call and text. Just not access the web. Can anyone help me here?:
slotalkinwoman said:
I have a unlocked AT&T Pantech Breeze 3 with a Straight Talk sim in it. Am unable to access the web. All my settings still go to AT&T.
Does anyone know the correct APN settings?
I have to go 3 places to do the setups.
# 1 Messaging > Settings > Multimedia > MMS Settings
There I can enter Profile Name: MMSC: Connection Type: Proxy Address:& Proxy Port.
Does anyone know the correct values to put in here?
# 2 My Stuff > Applications > Browser > Manage > Profiles
Profile Name : Home URL: Connection Type : Proxy Address: Proxy Port
# 3 Settings > Network Connectivity > Connection Name > APN : Primary & secondary DNS : Linger Time : Authentication: Username :
Password
Does anyone know the correct values that I need to put in here in order to get my phone to go to the web.
I ha ve voice mail, can call and text. Just not access the web. Can anyone help me here?:
Click to expand...
Click to collapse
absolutely works now i wonder if my AOSP roms will have working RIL...
nocoast said:
absolutely works now i wonder if my AOSP roms will have working RIL...
Click to expand...
Click to collapse
OK, nocoast. You said they absolutely work, would you mind sharing the values with me that you put in all those blanks so that mine will work too.Thanks.
anyone try these settings on S2 i9100 and see speed gains?
APN set, no data.
Hey gang, I've looked far-and-wide and haven't been able to locate a solution so, I throw myself on y'all's mercy and ask if anyone has a clue why I can't receive wireless data on my SGT AT&T GT-P1000.
I received my AT&T Straight Talk SIM the other day and porting the phone over was no issue. However, when I set up the APN I did not immediately reboot the phone due to some confusion about when the service actually transferred. Could this have affected my registration on the ST wireless network?
I've entered the APN settings precisely but, alas, still cannot connect to the wireless data. I really want to move over to ST, not only will it save me $30 a month whilst adding an "unlimited" data plan but, best of all, I'll get to tell AT&T to go pound sand.
Any help would be greatly appreciated.
did you add in the " http://"?
Does anybody now any way to unthrotte. Since we all now that ST throttle after 5gb. I called to ST customers service, they told me that unlimited data is only for navigation.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
Related
Hey guys, I have an Xperia x10a, got it from someone who had rogers. I decided to debrand and root it. That seemed to work out fine. Now I am trying to get the 3g to work, and it just doesn't seem to.
I have added APN settings for two different variations.
One was internet.com, the other was rogers-core-appl1.apn, neither work. I am trying to get a hold of rogers tech but they seem to have no clue whats going on.
Here is my info:
X10a
Firmware - 1.6
Baseband - 1.1.31
Build - R2Ba026
This is driving me nuts, but I cant seem to get it working.
I appreciate any help.
Thanks.
TheLegace said:
Hey guys, I have an Xperia x10a, got it from someone who had rogers. I decided to debrand and root it. That seemed to work out fine. Now I am trying to get the 3g to work, and it just doesn't seem to.
I have added APN settings for two different variations.
One was internet.com, the other was rogers-core-appl1.apn, neither work. I am trying to get a hold of rogers tech but they seem to have no clue whats going on.
Here is my info:
X10a
Firmware - 1.6
Baseband - 1.1.31
Build - R2Ba026
This is driving me nuts, but I cant seem to get it working.
I appreciate any help.
Thanks.
Click to expand...
Click to collapse
For Internet Access/3G
Name: Rogers Internet
APN: rogers-core-appl1.apn
Proxy: Not Set
Port: Not Set
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: http ://mms.gprs.rogers.com
MMS proxy: 10.128.1.69
MMS port: 80
MCC: 302
MNC: 720
Everything else should be blank Now press your menu button and save.
For MMS
Name Rogers MMS
APN media.com
Username media
Password mda01
Server 172.25.0.107
MMSC http://mms.gprs.rogers.com
MMS Proxy 10.128.1.69
MMS Port 80
MCC 302 (should already be filled in)
MNC either 720 or 72 depending on your SIM card (should already be filled in)
APN Type mms
APN Type: Not Set
Everything else should be blank Now press your menu button and save.
When you select apn in the menu you should see the new apns that you put in. Beside the Rogers internet one there should be a selectable circle, select it and your all good.
Rockjock007 said:
For Internet Access/3G
Name: Rogers Internet
APN: rogers-core-appl1.apn
Proxy: Not Set
Port: Not Set
Username: Not Set
Password: Not Set
Server: Not Set
MMSC:
MMS proxy:
MMS port: 80
MCC: 302
MNC: 720
Everything else should be blank Now press your menu button and save.
For MMS
Name Rogers MMS
APN
Username media
Password mda01
Server
MMSC
MMS Proxy
MMS Port 80
MCC 302 (should already be filled in)
MNC either 720 or 72 depending on your SIM card (should already be filled in)
APN Type mms
APN Type: Not Set
Everything else should be blank Now press your menu button and save.
When you select apn in the menu you should see the new apns that you put in. Beside the Rogers internet one there should be a selectable circle, select it and your all good.
Click to expand...
Click to collapse
All I seem to get is network errors. Not really sure what to do, enter all the info, enabled the APN from the menu, wifi works fine, but it just doesnt seem to work. The auto select network detects rogers, but the settings just dont seem to work.
Thanks.
Kitu.
I am very sorry guys, apparently rogers had a block on the data for some apparent reason. For some reason the first couple tech representatives didn't tell me there was a block.
Thank you those settings worked perfectly.
Didn't mean to waste anyones time.
Thank You.
Kitu.
TheLegace said:
I am very sorry guys, apparently rogers had a block on the data for some apparent reason. For some reason the first couple tech representatives didn't tell me there was a block.
Thank you those settings worked perfectly.
Didn't mean to waste anyones time.
Thank You.
Kitu.
Click to expand...
Click to collapse
No worries that is what we are here for to help! I have asked my fair share of questions and gotten sound advice. So it was my chance to give back.
I unlocked and rooted my Atrix I changed the apn to t mobile I get the E but the atrix still trys to access At&T on the browser and market what am I missing???
Mine did this same thing with my carrier in Japan, I could call and text and I would get H+ icon but no data. I sent mine back for a replacement.
Did you activate the phone on AT&T before unlocking and changing SIM?
I am facing the similar problem too. I use Atrix with Simple Mobile number. Mine catches E but doesn't load anything. Always ended up showing connection error. Is it a hardware problem?
Sounds like apn settings are incorrect.
newter55 said:
Sounds like apn settings are incorrect.
Click to expand...
Click to collapse
Default APN setting after I start up the phone with Simple Mobile sim card inserted is like this:
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.155.165.050
Port: 8080
Username: ****
Password: *
Server:
MMSC: h t t p://mms.msg.english.t-mobile.com/mms/wapenc (I spaced the http so that I can post this. cuz I'm new user.)
MMS Proxy: 261.155.165.050
MMS Port: 8080
MCC: 310
MNC: 260
Authentication Type:
APN Type:
Click to expand...
Click to collapse
Is it incorrect?
I don't know what your apn settings should be, just sounds like that is the source of your problem.
Edit...look at some of these:
http://forum.androidspin.com/showthread.php/2615-SETTINGS-T-Mobile-APN-Settings
that post is where I got the setting to try to change to when it had a problem. later I found out that it's the same setting as the default though the username and password is unknown since it's a star.
This device had no problem getting on AT&T right out of the box. If someone wants to include APN settings for other carriers in this thread, please feel free to. I'll get it started.
EDIT: Under the condition that this is a repost... Cyber slap the crap out of me.... and delete or merge.
AT&T
Name - AT&T PTA
APN - PTA
Proxy - Not Set
Port - Not Set
Username - Not Set
Password - Not Set
Server - Not Set
MMSC - http://mmsc.mobile.att.net
MMS Proxy - proxy.mobile.att.net
MMS Port - 80
MSM Protocol - WAP 2.0
MCC - 310
MNC - 410
Authentication Type - Not Set
APN Type - default,admin.fota,mms,supl,hipri
APN Enable/Disable - checked
Bearer - Unspecified
You can also follow this thread for testing APNs: http://forum.xda-developers.com/showthread.php?t=1791526
3UK (great for traveling to London and other areas I presume... mainly used it for data)
They won't copy and paste right so go here http://www.usgalaxys3.com/gsm-devel...us-samsung-galaxy-siii-t-t-mobile.html#post47 or to 3UKs site.
Orange France (great prepaid for France... mainly used it for data)
Name: orange
APN: orange
Proxy: not set
Port: not set
Username: orange
Password: orange
Server: not set
MMSC: not set
MMS Proxy: not set
MMS Port: not set
MMS Protocol: wap 2.0
MCC: 208
MNC: 01
Authentication type: not set
APN Type: default
Name: orange.acte
APN: orange.acte
Proxy: not set
Port: not set
Username: orange
Password: orange
Server: not set
MMSC: http://mms.orange.fr
MMS Proxy: 192.168.010.200
MMS Port: 8080
MMS Protocol: wap 2.0
MCC: 208
MNC: 01
Authentication type: not set
APN Type: mms
chrisngrod said:
This device had no problem getting on AT&T right out of the box. If someone wants to include APN settings for other carriers in this thread, please feel free to. I'll get it started.
EDIT: Under the condition that this is a repost... Cyber slap the crap out of me.... and delete or merge.
AT&T
Name - AT&T PTA
APN - PTA
Proxy - Not Set
Port - Not Set
Username - Not Set
Password - Not Set
Server - Not Set
MMSC - http://mmsc.mobile.att.net
MMS Proxy - proxy.mobile.att.net
MMS Port - 80
MSM Protocol - WAP 2.0
MCC - 310
MNC - 410
Authentication Type - Not Set
APN Type - default,admin.fota,mms,supl,hipri
APN Enable/Disable - checked
Bearer - Unspecified
3UK (great for traveling to London and other areas I presume... mainly used it for data)
They won't copy and paste right so go here http://www.usgalaxys3.com/gsm-devel...us-samsung-galaxy-siii-t-t-mobile.html#post47 or to 3UKs site.
Orange France (great prepaid for France... mainly used it for data)
Name: orange
APN: orange
Proxy: not set
Port: not set
Username: orange
Password: orange
Server: not set
MMSC: not set
MMS Proxy: not set
MMS Port: not set
MMS Protocol: wap 2.0
MCC: 208
MNC: 01
Authentication type: not set
APN Type: default
Name: orange.acte
APN: orange.acte
Proxy: not set
Port: not set
Username: orange
Password: orange
Server: not set
MMSC: http://mms.orange.fr
MMS Proxy: 192.168.010.200
MMS Port: 8080
MMS Protocol: wap 2.0
MCC: 208
MNC: 01
Authentication type: not set
APN Type: mms
Click to expand...
Click to collapse
Hmm, this will be the next phone for me
Sent from my Desire HD using xda premium
chrisngrod said:
This device had no problem getting on AT&T right out of the box. If someone wants to include APN settings for other carriers in this thread, please feel free to. I'll get it started.
EDIT: Under the condition that this is a repost... Cyber slap the crap out of me.... and delete or merge.
AT&T
Name - AT&T PTA
APN - PTA
Proxy - Not Set
Port - Not Set
Username - Not Set
Password - Not Set
Server - Not Set
MMSC - http://mmsc.mobile.att.net
MMS Proxy - proxy.mobile.att.net
MMS Port - 80
MSM Protocol - WAP 2.0
MCC - 310
MNC - 410
Authentication Type - Not Set
APN Type - default,admin.fota,mms,supl,hipri
APN Enable/Disable - checked
Bearer - Unspecified
You can also follow this thread for testing APNs: http://forum.xda-developers.com/showthread.php?t=1791526
3UK (great for traveling to London and other areas I presume... mainly used it for data)
They won't copy and paste right so go here http://www.usgalaxys3.com/gsm-devel...us-samsung-galaxy-siii-t-t-mobile.html#post47 or to 3UKs site.
Orange France (great prepaid for France... mainly used it for data)
Name: orange
APN: orange
Proxy: not set
Port: not set
Username: orange
Password: orange
Server: not set
MMSC: not set
MMS Proxy: not set
MMS Port: not set
MMS Protocol: wap 2.0
MCC: 208
MNC: 01
Authentication type: not set
APN Type: default
Name: orange.acte
APN: orange.acte
Proxy: not set
Port: not set
Username: orange
Password: orange
Server: not set
MMSC: http://mms.orange.fr
MMS Proxy: 192.168.010.200
MMS Port: 8080
MMS Protocol: wap 2.0
MCC: 208
MNC: 01
Authentication type: not set
APN Type: mms
Click to expand...
Click to collapse
You said "right out of the box". Did you mean it comes unlocked to be used on GSM carriers?
y3kt said:
You said "right out of the box". Did you mean it comes unlocked to be used on GSM carriers?
Click to expand...
Click to collapse
Yes it is unlocked for GSM carriers. No unlocking process, no code, etc.
Can anyone get mms to work with these settings? I have Internet just fine but can't send mms or receive them
Also PTA doesn't work only phone
Has anyone gotten AT&T MMS to work? I can receive texts, I just can't receive any pics.
does that mean i can use it on other carriers without unlock the device? greatest thankness
Sent from my HTC Vision using xda premium
xuxindb said:
does that mean i can use it on other carriers without unlock the device? greatest thankness
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Yep, SIM unlock and bootloader unlock are 2 different things.
Sent from my HTC6435LVW using xda app-developers app
thats really cool,since i still cant buy it from my country.....
Sent from my HTC Vision using xda premium
05GT said:
Has anyone gotten AT&T MMS to work? I can receive texts, I just can't receive any pics.
Click to expand...
Click to collapse
I have someone working on an MMS app. Unfortunately they don't have much time these days. We always have MMS problems when flashing devices to Cricket. The app would work the same way as the one for the CDMA carriers.
I tested it with Solavei. It works, but the notifications with JB are off.
So you guys saying I can buy this phone from verizon then put my ATT sim in and everything will work, data ?
smashcz said:
So you guys saying I can buy this phone from verizon then put my ATT sim in and everything will work, data ?
Click to expand...
Click to collapse
You should get talk, text, data (HSPA, I think there are some questions about HSPA+, and LTE is a different band so you won't get that).
You'll have to enter the AT&T APN. I can send with GOsms and the MMSC entered in those settings. Still can't receive. That's why I have a friend working on that.
I usually work on CDMA stuff and have a normal 9/5. That's why I've left the door kind of open here.
can't get ATT APN to work
I am having trouble setting up my DNA to work on ATT data network. I put the micro sim from my iphone 4s in the DNA, changed the APN following op's settings but could never get mobile data connected. Making phone call is fine. Did I do anything wrong? Any input appreciated.
chrisngrod said:
This device had no problem getting on AT&T right out of the box. If someone wants to include APN settings for other carriers in this thread, please feel free to. I'll get it started.
EDIT: Under the condition that this is a repost... Cyber slap the crap out of me.... and delete or merge.
AT&T
Name - AT&T PTA
APN - PTA
Proxy - Not Set
Port - Not Set
Username - Not Set
Password - Not Set
Server - Not Set
MMSC - http://mmsc.mobile.att.net
MMS Proxy - proxy.mobile.att.net
MMS Port - 80
MSM Protocol - WAP 2.0
MCC - 310
MNC - 410
Authentication Type - Not Set
APN Type - default,admin.fota,mms,supl,hipri
APN Enable/Disable - checked
Bearer - Unspecified
You can also follow this thread for testing APNs: http://forum.xda-developers.com/showthread.php?t=1791526
3UK (great for traveling to London and other areas I presume... mainly used it for data)
They won't copy and paste right so go here http://www.usgalaxys3.com/gsm-devel...us-samsung-galaxy-siii-t-t-mobile.html#post47 or to 3UKs site.
Orange France (great prepaid for France... mainly used it for data)
Name: orange
APN: orange
Proxy: not set
Port: not set
Username: orange
Password: orange
Server: not set
MMSC: not set
MMS Proxy: not set
MMS Port: not set
MMS Protocol: wap 2.0
MCC: 208
MNC: 01
Authentication type: not set
APN Type: default
Name: orange.acte
APN: orange.acte
Proxy: not set
Port: not set
Username: orange
Password: orange
Server: not set
MMSC: http://mms.orange.fr
MMS Proxy: 192.168.010.200
MMS Port: 8080
MMS Protocol: wap 2.0
MCC: 208
MNC: 01
Authentication type: not set
APN Type: mms
Click to expand...
Click to collapse
I am able to receive mms with a Tmo sim. I have not changed any apn settings so no data yet.
I was able to just drop in a T-mo card and pick up data.. But as you'll know edge only. With brief moments of HSDPA when I'm assuming I was close enough to a tower that has been upgraded to the 1900 band. Well I decided to go to at&t and grab a sim to see if there was an improvement. I couldn't personally get any of the APN settings to work that were presented in the op and being that I'm new to anything gsm I've got no clue why: Lol.. Could it be a location thing? However I did find a setup that does indeed pickup data for me. Figured I'd share just in case there were others having the same issue. Keep in mind MMS is still hit and miss. I've had them go through out&in but it fails most of the time.
AT&T APN Settings
Internet Settings
APN: wap.cingular
Proxy: [Leave Blank]
Port: [Leave Blank]
Username: [email protected]
Password: CINGULAR1
MMS Settings
Server: [Leave Blank]MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: [Leave Blank]
MCC: 310
MNC: 410
Oh btw... Source for the above apn settings... http://theunlockr.com/internet-mms-settings/
Since we all know there is an issue sending and receiving MMS, I do the bare minimum to get my AT&T SIM to work. I create a new APN and only change 3 lines.....
Under "Name" I put PTA
Under "APN" I put phone
Under "MMS Port" I put 8080 [more secure than port 80]
Leave everything else alone. Don't add your MMSC address, proxy or anything else.
Now save and you are good to go. I get HSDPA. Don't know if it's + or not, but I get the exact same speeds as I normally do with my AT&T phones.
EmericanX said:
I was able to just drop in a T-mo card and pick up data.. But as you'll know edge only. With brief moments of HSDPA when I'm assuming I was close enough to a tower that has been upgraded to the 1900 band. Well I decided to go to at&t and grab a sim to see if there was an improvement. I couldn't personally get any of the APN settings to work that were presented in the op and being that I'm new to anything gsm I've got no clue why: Lol.. Could it be a location thing? However I did find a setup that does indeed pickup data for me. Figured I'd share just in case there were others having the same issue. Keep in mind MMS is still hit and miss. I've had them go through out&in but it fails most of the time.
AT&T APN Settings
Internet Settings
APN: wap.cingular
Proxy: [Leave Blank]
Port: [Leave Blank]
Username: [email protected]
Password: CINGULAR1
MMS Settings
Server: [Leave Blank]MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: [Leave Blank]
MCC: 310
MNC: 410
Oh btw... Source for the above apn settings... http://theunlockr.com/internet-mms-settings/
Click to expand...
Click to collapse
I personally tried exactly as you referenced... I got zilch! Lol.. my device would not grab data until I used the Cingular apn information. As far as the MMS you're exactly right. I tried numerous combination with no result. The few times it did go through seem to be a fluke. I just threw the Cingular apn settings up because I was able to grab data and hopefully it may help someone else that tried the simple apn settings to no avail... I'm going to order a Straight Talk sim this weekend and see how that goes as well. I've got a month prepaid for both T-Mobile and AT&T so I've got a little time to play around with everything.
Side note: man my family and friends thought I was a dork before now I've got a VZW Nex and GSM DNA that I'm carrying around all the time! Lol
Sent from my HTC6435LVW using Tapatalk 2
EmericanX said:
I personally tried exactly as you referenced... I got zilch! Lol.. my device would not grab data until I used the Cingular apn information. As far as the MMS you're exactly right. I tried numerous combination with no result. The few times it did go through seem to be a fluke. I just threw the Cingular apn settings up because I was able to grab data and hopefully it may help someone else that tried the simple apn settings to no avail... I'm going to order a Straight Talk sim this weekend and see how that goes as well. I've got a month prepaid for both T-Mobile and AT&T so I've got a little time to play around with everything.
Side note: man my family and friends thought I was a dork before now I've got a VZW Nex and GSM DNA that I'm carrying around all the time! Lol
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
I guess my friend is nowhere to be found for the MMS app.
Anyways I think it has something to deal with the APN whitelist in the build.prop. Notice they don't allow for the mms APN. Does someone want to play with that as I don't have another carrier's SIM right now.
(ro.net.apnwhitelist=admin,ims,supl,verizon,verizon800)
chrisngrod said:
I guess my friend is nowhere to be found for the MMS app.
Anyways I think it has something to deal with the APN whitelist in the build.prop. Notice they don't allow for the mms APN. Does someone want to play with that as I don't have another carrier's SIM right now.
(ro.net.apnwhitelist=admin,ims,supl,verizon,verizon800)
Click to expand...
Click to collapse
I am willing to do whatever you need. I have the DNA Unlocked and Rooted on stock ROM. I have a valid AT&T and T-Mobile SIM card. However, I am coming from 5 years of iPhone hacking, so I would need to be handled with kid gloves.
Just let me know what you need done, or point me to a tutorial thread.
AIRBORNE!!!
Sent from my One X using Tapatalk 2
I have recently taken my Verizon Galaxy S4 and put it on the AT&T network (Prepaid $60 a month plan) and after hours of reading these forums and trying apn settings posted I found some information via Google that might prove useful to those of you that wish to do the same.
Before I start, I am getting HSPA+ speeds of around 12MBps, I have full working data, text, calls, and MMS. At the moment I haven't been able to get the tethering to work, wifi or otherwise.. says number not found. I assume that means its checking to see if its available for a plan that allows it via AT&T.
APN settings I used are as follows.
Name: ATT HSPA+
APN: phone
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: <Leave in Blank>
Password: <Leave in Blank>
Server: <Leave in Blank>
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Leave in Blank>
APN type: default,supl,mms,hipri
APN Protocol: Leave it to the Default one
Bearer: leave it to the Default one
For those of you unfamiliar with how to change the APN settings: apn settings for Android - For Android, you should go to Settings > Wireless Connections > More > Mobile Networks > Access Point Names.
Its fairly straight forward. Make sure that once your finished adding the apn info you hit your menu key and save, then back out and select the apn you want to use.
APN setting source: http://apn-settings.com/us/att-apn-settings/
There are a couple video's on that site as well if you need a walk through.
I take no credit for the video's or the website, I am only relaying some useful information that I had trouble finding.
Hope this helps.
Curious if you have tried to tether and if it works? I was able to get T-Mobile prepay working on the S4. The only issue was that I couldn't get around the tether upsell page. I read everything. Thanks
BadToThePhone said:
Curious if you have tried to tether and if it works? I was able to get T-Mobile prepay working on the S4. The only issue was that I couldn't get around the tether upsell page. I read everything. Thanks
Click to expand...
Click to collapse
No, I couldn't get the tethering to work.. I'm using all the stock stuff on my S4 at the moment but once I flash something I'll play with it some more.. But as it stands so far that is all I have found that doesn't work.
I have these setting’s on my AT&T HTC One that is unlocked.. Calls, SMS, MMS, WEB, Voicemail all work anywhere I’ve gone in the US.. I am here in Mexico for this week and I added the Mexico plan so I can roam out here but I can’t get my phone to connect out here. Do I need to change these APN settings? Please help
Name : metropcs
APN: Fast.t-mobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: http://metropcs.mmsmvno.com/mms/wapenc
MMS proxy: not set
MMS port: not set
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: not set
APN type: Not set
APN enable/disable: APN enabled
Bearer: Unspecified
IF that company doesnt have agreements with cell companies in Mexico not sure your gonna have luck on that one....I know with att they have an agreement with a buncha companies to allow their sims to use outside towers..If not mistaken metropcs is running off sprint towers so might have some difficulty with this one...good luck
mobilecj said:
I have these setting’s on my AT&T HTC One that is unlocked.. Calls, SMS, MMS, WEB, Voicemail all work anywhere I’ve gone in the US.. I am here in Mexico for this week and I added the Mexico plan so I can roam out here but I can’t get my phone to connect out here. Do I need to change these APN settings? Please help
Name : metropcs
APN: Fast.t-mobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: http://metropcs.mmsmvno.com/mms/wapenc
MMS proxy: not set
MMS port: not set
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: not set
APN type: Not set
APN enable/disable: APN enabled
Bearer: Unspecified
Click to expand...
Click to collapse
APN type should read: default,supl,mms. (No spaces after commas)
mexigga said:
APN type should read: default,supl,mms. (No spaces after commas)
Click to expand...
Click to collapse
Thanx I will try it now what will that change when I'm back in the states bc everything works fine with out that line just curious
Sent from my 831C using XDA Premium 4 mobile app
Maybe you guys can help me? My HTC One is only getting EDGE.
My HTC One that is being used with MetroPCS' BYOD plan is only getting EDGE, and not 3g, 4g, or even LTE. The phone was being used with Verizon Wireless before I got it. Everything works fine, but my data speed is super slow (EDGE 0.01 download and 0.01 upload). When I check the APN settings, it still says Verizon Wireless Internet. The people at my local MetroPCS store were no help since they don't know anything about APN settings. Thanks.
Racinglovian said:
My HTC One that is being used with MetroPCS' BYOD plan is only getting EDGE, and not 3g, 4g, or even LTE. The phone was being used with Verizon Wireless before I got it. Everything works fine, but my data speed is super slow (EDGE 0.01 download and 0.01 upload). When I check the APN settings, it still says Verizon Wireless Internet. The people at my local MetroPCS store were no help since they don't know anything about APN settings. Thanks.
Click to expand...
Click to collapse
Google found this >> http://forum.xda-developers.com/showthread.php?p=46767551
I have the same problem with a Metro PCS plan on an Alcatel One Touch Fierce XL, has anyone been able to make Mexico roaming function?