S-off but locked bootloader? - HTC Rezound

I just successfully performed S-off but my bootloader changed to "locked". Is that normal?
Also, I declined to install jp modified hboot because I was not sure what it was. Do I have to install another hboot after S-off?

S-OFF > unlocked bootloader. You don't need an unlocked bootloader when you are S-OFF.
With a stock locked bootloader you won't be able to use most fastboot commands. That's the purpose of the jpbear hboot. It allows you to use them without unlocking. However, if you ever go back S-ON, you have to have a stock bootloader or you'll brick, so you should only use a modded hboot if you need the fastboot commands. Otherwise, stock is just fine.

I read a lot about this subject in this thread last night:
http://forum.xda-developers.com/showthread.php?t=1852228
Could give you some useful info on the pros and cons of flashing the j-nut hboot or not and keeping locked or unlocking.

shrike1978 said:
S-OFF > unlocked bootloader. You don't need an unlocked bootloader when you are S-OFF.
With a stock locked bootloader you won't be able to use most fastboot commands. That's the purpose of the jpbear hboot. It allows you to use them without unlocking. However, if you ever go back S-ON, you have to have a stock bootloader or you'll brick, so you should only use a modded hboot if you need the fastboot commands. Otherwise, stock is just fine.
Click to expand...
Click to collapse
Sorry for the noob questions. I don't know much about the tech, I can only follow the instructions. So, do I need a modified bootloader if I want to flash Rom that require S-off or is the stock bootloader OK? I want to flash a Rom for which I need to be S-off and on the latest RUU.

I'd guess that 99% of people who do the jbear s-off procedure take the modified hboot as an uniformed choice. They figure if jbear provided this, then it must be great.
If you do not install the jbear hboot, you should unlock your bootloader using htcdev unlock bin file. You will have the following benefits with s-off, stock unlocked hboot:
o can ruu with unlocked bootloader. you will never need to relock before performing an ruu.
o install ROMs easier without the need to install kernels via ph98img.zip. method
o able to fastboot flash recovery and boot/kernel
o less bricking risks in the future
being s-off with the locked jbear modified hboot has the advantages of:
o displaying Locked, but can do everything an unlocked bootloader can do.
o makes it easier to lie to Verizon that you never tampered with the phone, never unlocked, never ROMed, it is not your fault the phone is bricked.
o able to fastboot flash recovery and boot/kernel
o able to fastboot flash hboot/bootloaders and some other fastboot commands that no developers are using.
One guy went so far as to hexedit his hboot to display "s-on" and "locked" to hide the fact that he is s-off and unlocked. He bricked his phone on his first attempt. got phone insurance to replace his phone. Then he got others to test his later attempts which work and didnt brick. So if you want to lie with impunity to Verizon, don't use jbear hboot, instead use this guy's hboot. you'll find it in the developer's forum.
Personally I take great care and deliberation about what changes I make to my phone because I do not plan on lieing to get someone else to pay for my mistakes.

Wendemixda said:
I just successfully performed S-off but my bootloader changed to "locked". Is that normal?
Also, I declined to install jp modified hboot because I was not sure what it was. Do I have to install another hboot after S-off?
Click to expand...
Click to collapse
Yes it is normal....see what the other guys say about jb hboot.....for me, since I haven't and don't plan on having to use fastboot commands, I just left it locked with stock hboot.

How can I reunlock mine? S off locked bootloader
An old HTC Incredible 4G

EzraDi said:
How can I reunlock mine? S off locked bootloader
An old HTC Incredible 4G
Click to expand...
Click to collapse
This is the Rezound forums. You should find the Incredible forums and ask there, although I think a lot of Rezound users used to have Incredibles, but it's pretty dead here now that the phone is 4 years old.

feralicious said:
This is the Rezound forums. You should find the Incredible forums and ask there, although I think a lot of Rezound users used to have Incredibles, but it's pretty dead here now that the phone is 4 years old.
Click to expand...
Click to collapse
Thank you

Related

Downgrading hboot 1.500 to 1.40 with s-off

I was having a problem with my screen being unresponsive so i needed to take it into a sprint store. i ran a signed 2.17 exe and now I have hboot 1.5 but still have s-off. in the bootloader screen it says locked but still shows s-off. i am confused as to what to do next. i assume i need to unlock but didn't know if i could do this via revolutionary. I tried to do a search but everything i found was related to s-on. I am trying to restore my phone to its rooted state since I have already had the repairs made. Any help and links would be greatly appreciated.
Brandon
Sent from my iPad using Tapatalk HD
brandonb8 said:
I was having a problem with my screen being unresponsive so i needed to take it into a sprint store. i ran a signed 2.17 exe and now I have hboot 1.5 but still have s-off. in the bootloader screen it says locked but still shows s-off. i am confused as to what to do next. i assume i need to unlock but didn't know if i could do this via revolutionary. I tried to do a search but everything i found was related to s-on. Any help and links would be greatly appreciated.
Brandon
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
fastboot oem writesecureflag3 or fastboot oem writesecureflag 3 , one of those will turn s-on
Edit... This might help http://forum.xda-developers.com/showthread.php?t=1578977
Thanks for the quick response. Sorry I was not more clear about what I am wanting to do. I am keeping the phone and the repairs have been made. I now have hboot 1.50 with s-off. I am wanting to flash a custom rom again and need to install a recovery. I didn't know what the process is currently for "unlocking" my phone now. When I rooted the phone originally, i was on hboot 1.4 and used revolutionary. I just do not know what to do to get my phone rooted again. I understand I have part of it with s-off still being on my phone, but the "locked" text at the top of the bootloader screen tells me I need to rectify this before I can flash a recovery. Is this correct?
Thanks.
Brandon
brandonb8 said:
Thanks for the quick response. Sorry I was not more clear about what I am wanting to do. I am keeping the phone and the repairs have been made. I now have hboot 1.50 with s-off. I am wanting to flash a custom rom again and need to install a recovery. I didn't know what the process is currently for "unlocking" my phone now. When I rooted the phone originally, i was on hboot 1.4 and used revolutionary. I just do not know what to do to get my phone rooted again. I understand I have part of it with s-off still being on my phone, but the "locked" text at the top of the bootloader screen tells me I need to rectify this before I can flash a recovery. Is this correct?
Thanks.
Brandon
Click to expand...
Click to collapse
Oh I see, well, your s-off and that locked banner means nothing because s-off should override it. Just flash a PG86IMG.zip of a recovery of your choice and you're good to go. Or you can flash it via fastboot by typing fastboot flash recovery "yourrecovery.img" once you do that, flash a rooted Rom. You could flash a lower hboot with a PG86IMG.zip if you want but its not really necessary.
If you want, I could dig up hboot 1.4 or revs hboot for ya. I think I have em in dropbox.
I got it. Thanks for all the help.
Sent from my PG86100 using Tapatalk 2

[Q] RE-unlock bootlaoder after ICS update

I had my HTC amaze unlocked with s-off and a modded hboot I then updated to a new ICS firmware to run ICS however when the firmware flashed to my phone it locked my phone and reset my hboot but still kept s-off. Is there anyway to unlock my phone again? If anyone has any help please let me know I already tried to unlock it through HTdev website and it did not work!!!
If you are s=off, then you don't need to unlock your bootloader. I'm assuming you have eng bootloader, and with that, you don't need to unlock anything.
Sent from my HTC_Amaze_4G using xda premium
pharmhand said:
I had my HTC amaze unlocked with s-off and a modded hboot I then updated to a new ICS firmware to run ICS however when the firmware flashed to my phone it locked my phone and reset my hboot but still kept s-off. Is there anyway to unlock my phone again? If anyone has any help please let me know I already tried to unlock it through HTdev website and it did not work!!!
Click to expand...
Click to collapse
HTC dev website is the way i did it, and it worked perfect for me. What method did you use that didn't allow you to unlock your phone?
Sent from my HTC_Amaze_4G using Tapatalk 2
If any of you read correctly, he said he unlocked it before, therefore, all he has to do is place the unlock_code file in hasoon's tool's data folder and run the unlock bootloader option, voila he's back to being unlocked, though the relocking sounds kind of odd, but it could probably be due to the hboot he was using, I'm guessing was Juopunutbear's or something.
Dark Nightmare said:
If any of you read correctly, he said he unlocked it before, therefore, all he has to do is place the unlock_code file in hasoon's tool's data folder and run the unlock bootloader option, voila he's back to being unlocked, though the relocking sounds kind of odd, but it could probably be due to the hboot he was using, I'm guessing was Juopunutbear's or something.
Click to expand...
Click to collapse
I did read it, the old unlock bin does not work with new ics so he has to redo everything once more....
Sent from my HTC_Amaze_4G using Tapatalk 2
Well my old unlock bin worked fine for me re-unlocking on ICS, guess I was lucky, okay cool, my bad.
Yes I had hboot from Juopunutbear when I did the s-off it asked to install his hboot but after I upgraded it changed my hboot back to 1.93.0002 and it is SHIP s-off not eng which I am not totally sure what the difference is but is there a way to change SHIP back to ENG????? I am going to give HTCdev another chance and see what happens... thanks for the input and help
ok so I just tried HTCdev again and it unlocked my phone however it did a hard reset the only thing I have to do now is to have eng s-off instead of ship s-off.
pharmhand said:
ok so I just tried HTCdev again and it unlocked my phone however it did a hard reset the only thing I have to do now is to have eng s-off instead of ship s-off.
Click to expand...
Click to collapse
Just flash the eng hboot via bootloader, though you don't need to, unless you plan to do fastboot commands, which the average user doesn't have much need for, hasoon's tool does everything you need, recovery, root, etc, though I do recommend 4EXT recovery, which you can easily install after obtaining root.

This is very much not awesome...

I decided to run the 4.03.605.2 RUU before flashing back to Neo's Adrenaline 2.0...running the RUU reflashed a stock recovery and returned the bootloader to Locked, of course, so I went to the HTC Dev site to try to unlock it. I'm sure it's already a known issue but it appears that HTC's bootloader unlock tool is down and has been for some short time with no apparent efforts on their part to fix it.
So, I'm stuck with a locked bootloader until such time as someone can find a way to flash recovery without needing to unlock...
buh, wasn't the whole point of S-OFF so you don't have to use HTC's bootloader unlocker tool?
just s-off.
Yes, but if you flash an RUU that updates HBOOT, it will relock. Doesn't change the S flag, but it does indeed lock. I've had this happen twice.
Managed to find my original unlock_code.bin. Worked perfectly, I'm back in business...
When you unlock your phone, SAVE THE UNLOCK TOKEN!!! It can be used on your device no matter what you do.
socal87 said:
Yes, but if you flash an RUU that updates HBOOT, it will relock. Doesn't change the S flag, but it does indeed lock. I've had this happen twice.
Managed to find my original unlock_code.bin. Worked perfectly, I'm back in business...
When you unlock your phone, SAVE THE UNLOCK TOKEN!!! It can be used on your device no matter what you do.
Click to expand...
Click to collapse
I think the point he was trying to make is that if you are s-off, it overides the lock/unlock so you don't have to be unlocked anymore. S-off and locked, you can install whatever you want...
nrfitchett4 said:
I think the point he was trying to make is that if you are s-off, it overides the lock/unlock so you don't have to be unlocked anymore. S-off and locked, you can install whatever you want...
Click to expand...
Click to collapse
That's what I thought too, but I tried to flash recovery after running the RUU...got the "not allowed" error; unlocked, and had no issue.
To my knowledge, all S-off does is "break" the locks on certain partitions, such as boot, so they can be written from recovery...and allow flashing of radios and HBOOT without a valid signature. Recovery itself is what decides what you can flash in terms of ROMs...the stock recovery won't flash anything but an original signed .zip.
Next time just flash the the jupunto bear hboot it makes everything easier and all you need is the s off to flash it. I do it right after running any ruu
I ran the latest ruu,was s-off,locked bootloader,and flashed the recovery without any problems. You can try to push it through adb if anything
Sent from my ADR6425LVW using Tapatalk 2
I keep my phone unlocked all the time.
I can ruu with an unlocked bootloader because I have s-off.
The ruu process always leaves my phone in its unlocked state.
I never bother using jbear hboots, as they don't accomplish anything useful that anyone is likely to use. It gives some additional fastboot commands that nobody is using. If someday I need a jbear hboot command, then I'll flash it. Otherwise it just seems to be extra work, and it appears to have complicated your life.
---------- Post added at 06:19 AM ---------- Previous post was at 05:54 AM ----------
jayochs said:
buh, wasn't the whole point of S-OFF so you don't have to use HTC's bootloader unlocker tool?
just s-off.
Click to expand...
Click to collapse
No, the instructions at hbear's website list being htcdev unlocked as a prerequisite along with being stock and rooted, before even attempting the s-off procedure. Soff is something in addition to unlocked.
The jbear hboot acts like it is unlocked, whether the phone is locked or unlocked. Supposedly this will fool Verizon that your returned borked phone was not tampered with - well until Verizon notices jbear written on your hboot screen.
However, running a ruu will install a stock hboot.
Personally I think jbear hboots are a waste of effort. They are not going to fool anyone at Verizon because jbear is displayed on the hboot screen.
If somehow you go back to s-on with the jbear hboot still installed, then you are,oops, permanently bricked.
The additional fastboot commands one gets with the jbear hboot are not being used, not even by developers during their Rom installation procedures.
After every ruu, you need to repeat the htcdev unlock, and reflash the jbear hboot. This is extra work.
Everytime one flashes an hboot he is taking a bricking risk. if the flashing fails for any reason, like you pulled out the battery or battery runs out of power, or your file got corrupted, then you have an unrecoverable brick. That's why OTAs refuse to install on a low battery charge.
S-off + htcdev Unlocked are wonderful, but I think the concept of modified hboots should be reconsidered.
regards
Howard
HowardZ said:
I keep my phone unlocked all the time.
I can ruu with an unlocked bootloader because I have s-off.
The ruu process always leaves my phone in its unlocked state.
I never bother using jbear hboots, as they don't accomplish anything useful that anyone is likely to use. It gives some additional fastboot commands that nobody is using. If someday I need a jbear hboot command, then I'll flash it. Otherwise it just seems to be extra work, and it appears to have complicated your life.
---------- Post added at 06:19 AM ---------- Previous post was at 05:54 AM ----------
No, the instructions at hbear's website list being htcdev unlocked as a prerequisite along with being stock and rooted, before even attempting the s-off procedure. Soff is something in addition to unlocked.
The jbear hboot acts like it is unlocked, whether the phone is locked or unlocked. Supposedly this will fool Verizon that your returned borked phone was not tampered with - well until Verizon notices jbear written on your hboot screen.
However, running a ruu will install a stock hboot.
Personally I think jbear hboots are a waste of effort. They are not going to fool anyone at Verizon because jbear is displayed on the hboot screen.
If somehow you go back to s-on with the jbear hboot still installed, then you are,oops, permanently bricked.
The additional fastboot commands one gets with the jbear hboot are not being used, not even by developers during their Rom installation procedures.
After every ruu, you need to repeat the htcdev unlock, and reflash the jbear hboot. This is extra work.
Everytime one flashes an hboot he is taking a bricking risk. if the flashing fails for any reason, like you pulled out the battery or battery runs out of power, or your file got corrupted, then you have an unrecoverable brick. That's why OTAs refuse to install on a low battery charge.
S-off + htcdev Unlocked are wonderful, but I think the concept of modified hboots should be reconsidered.
regards
Howard
Click to expand...
Click to collapse
You are wrong in so many ways Howard.please everyone font bother reading this post.
Ok jbear hboot is not meant to fool Verizon. It's meant to provide fastboot commands even while the bootloader is locked.
As for op,I can confirm after running the ruu,you will still have to unlock to flash your recovery, if you still have your unlock code file you can unlock with that just like you did the first time .
Oh and the HTC website always does that just keep trying like every hour or so, if you can't find that unlock file they e mailed you
Sent from my ADR6425LVW using xda app-developers app
I am s-off and locked. And have been able to flash everything under the sun with no problems
The jb hboots are used not to fool Verizon, but to allow people to use fastboot commands like, "fastboot flash recovery (filename.img)" after s-off.
If you are s-off with stock hboot you can't run those commands.
Like Howard said, if you are on the jb hboot and you run the s-on command...then you're bricked. So those people with jb hboots are told to run a RUU first. Like Howard says, there are some risks to flashing things...its also risky to put your phone in your shirt pocket when you are around water.
Now, you can unlock your device after s-off (like Howard did) and use those commands with the stock hboot. However, if you want to return it to Verizon and you lock it, then it will read 'relocked' (i believe). I think that is the ONLY disadvantage of unlocking after s-off.
All this 'stuff' is in these threads. Some of it is personal preference and we all have a reason why our phones are configured certain ways. Just be aware of the implications.
There's no extra work on flashing jbear hboot. Right after the ruu rename the jhboot.zip to ph98img boot on hboot, flash and done. It seems you don't have a lot of knowledge when it comes into hboot stuffs.(no offense intended) And like the others guys said jbear is not to fool anyone and beside the jbear is an unlocked hboot.
socal87 said:
So, I'm stuck with a locked bootloader until such time as someone can find a way to flash recovery without needing to unlock...
Click to expand...
Click to collapse
There is a flashable amon ra you can use. You don't need to unlock. You also will need to flash supersu again too because you lost root after the ruu. If you want to stay on a stock hboot, then you run things as ph98 files.
Sent from my ADR6425LVW using xda app-developers app
dassh said:
There is a flashable amon ra you can use. You don't need to unlock. You also will need to flash supersu again too because you lost root after the ruu. If you want to stay on a stock hboot, then you run things as ph98 files.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
But he does need to be s-off...and I think he said he wasn't.
topgun1953 said:
The jb hboots are used not to fool Verizon, but to allow people to use fastboot commands like, "fastboot flash recovery (filename.img)" after s-off.
If you are s-off with stock hboot you can't run those commands.
Like Howard said, if you are on the jb hboot and you run the s-on command...then you're bricked. So those people with jb hboots are told to run a RUU first. Like Howard says, there are some risks to flashing things...its also risky to put your phone in your shirt pocket when you are around water.
Now, you can unlock your device after s-off (like Howard did) and use those commands with the stock hboot. However, if you want to return it to Verizon and you lock it, then it will read 'relocked' (i believe). I think that is the ONLY disadvantage of unlocking after s-off.
All this 'stuff' is in these threads. Some of it is personal preference and we all have a reason why our phones are configured certain ways. Just be aware of the implications.
Click to expand...
Click to collapse
with s-off and unlocked and stock hboot
one can
fastboot boot recoveryImageFile.IMG
fastboot flash recovery recoveryImageFile.IMG
fastboot flash boot kernelImageFile.IMG
I have done these, and they work.
It makes one wonder who really needs jbear hboots.
p.s. if someday I brick my phone, I don't plan to return to a Verizon store and lie to them.
HowardZ said:
with s-off and unlocked and stock hboot
one can
fastboot boot recoveryImageFile.IMG
fastboot flash recovery recoveryImageFile.IMG
fastboot flash boot kernelImageFile.IMG
I have done these, and they work.
It makes one wonder who really needs jbear hboots.
Click to expand...
Click to collapse
Yes you can flash those things. I guess that's what I was saying.
The "reason" that I know of to use jb hboots is if you ever want to return or sell your phone in a 'locked' state, you can. If you s-off, unlock, and then relock, I think it says "relocked" on the hboot screen.
topgun1953 said:
Yes you can flash those things. I guess that's what I was saying.
The "reason" that I know of to use jb hboots is if you ever want to return or sell your phone in a 'locked' state, you can. If you s-off, unlock, and then relock, I think it says "relocked" on the hboot screen.
Click to expand...
Click to collapse
ok, I suppose if you flash a stock hboot, then the hboot screen will show locked without displaying jbear.
But if Verizon sees jbear on your screen, they'll know you've done a whole lot more tampering than simply htcdev unlock.
Perhaps Verizon will be stupid enough to see unlocked and ignore the lines which say soff and jbear?
HowardZ said:
ok, I suppose if you flash a stock hboot, then the hboot screen will show locked without displaying jbear.
But if Verizon sees jbear on your screen, they'll know you've done a whole lot more tampering than simply htcdev unlock.
Perhaps Verizon will be stupid enough to see unlocked and ignore the lines which say soff and jbear?
Click to expand...
Click to collapse
I don't think verizon cares. IMHO
In my case, I'm locked, s-off, stock hboot. I can get what I want in ph98img.zip files so I don't use fastboot. I can write the s-on flag, and flash the lastest ota and my phone will be like stock, out of the box....good for some, doesn't really matter to me.
HowardZ said:
ok, I suppose if you flash a stock hboot, then the hboot screen will show locked without displaying jbear.
But if Verizon sees jbear on your screen, they'll know you've done a whole lot more tampering than simply htcdev unlock.
Perhaps Verizon will be stupid enough to see unlocked and ignore the lines which say soff and jbear?
Click to expand...
Click to collapse
Verizon don't care about s-off because there's some rezound that came out s-off out of the box.
topgun1953 said:
But he does need to be s-off...and I think he said he wasn't.
Click to expand...
Click to collapse
Yes, absolutely needs to be s-off for what i was suggesting. I may have mis-understood the op and subsequent posts. If the op doesn't want to s-off then unlock is a necessity but if s-offed, then the op has a choice to unlock or stay locked.
I chose to stay locked, like Topgun says, it's easier. The only difference is i did install a jbear hboot, but again that was because i think it's easier to use fastboot sometimes instead of trying to repackage something as a ph98.
Sent from my ADR6425LVW using xda app-developers app
---------- Post added at 01:28 PM ---------- Previous post was at 01:22 PM ----------
HowardZ said:
p.s. if someday I brick my phone, I don't plan to return to a Verizon store and lie to them.
Click to expand...
Click to collapse
If you brick, you couldn't change your hboot anyway. Using a jbear hboot is not to be deceptive.
Sent from my ADR6425LVW using xda app-developers app

[Q] PROBLEM "Locked" s-off

Guys, I didn't find any explanation for this here, and I still have a problem. I have HTC EVO 3D GSM..
I was on 1.53 hboot and I unlocked bootloader via HTCdev.com. After that I wanted to do s-off with "wire trick"..I successfully made it. I wanted to install Disarmed Toaster ROM, but I had a bootloop. So, I downloaded new PG86IMG.zip, downgraded hboot, and now I have 2.3 GB android, with LOCKED BL and S-OFF..now..How do I get UNLOCKED bootloader..I tried with htcdev.com again, but failed..There is error failed: remote not allowed
Hope you can help me..
This post explains the situation you are describing on the CDMA version, and I suspect it is very much the same on the GSM model. If you want to read the original explanation by Unknownforce it is here.
You should be able to use the JBear hboot for your phone instead on unlocking the bootloader, or if you need an older version I think I read there is a GSM version of the Revolutionary bootloader.
ramjet73
You just installed JBear again and you will gain UNLOCKED. Or you should Unlocked again w/ HTCdev.
Sent from my PG86100 using xda premium
I dont think locked should be a problem as long as you are s-off. Someone correct me if i'm wrong but i believe you can flash roms/kernels etc now.
why do you need it to be unlocked?
EM|NEM said:
I dont think locked should be a problem as long as you are s-off. Someone correct me if i'm wrong but i believe you can flash roms/kernels etc now.
why do you need it to be unlocked?
Click to expand...
Click to collapse
This is correct. You do not need boot loader unlocked I'd you are s-off.
Sent from my PG86100 using xda app-developers app
EM|NEM said:
I dont think locked should be a problem as long as you are s-off. Someone correct me if i'm wrong but i believe you can flash roms/kernels etc now.
why do you need it to be unlocked?
Click to expand...
Click to collapse
raptoro07 said:
This is correct. You do not need boot loader unlocked I'd you are s-off.
Click to expand...
Click to collapse
Some people still seem to unlock the bootloader after gaining S-OFF so they can run fastboot commands like "flash" and "erase". If you try to run those commands with a locked bootloader you will get the "failed: remote not allowed" error even with radio S-OFF.
The wire trick leaves the bootloader locked, but choosing the JBear hboot or flashing another custom version (engineering or Revolutionary) is a better way to get access to those commands than unlocking the bootloader again.
ramjet73
Thank you all..I did what had to be done..Now, I have s-off with Jpbear hboot..mwakious rom..and it works like charm ..This is my first ROM installed on HTC EVO 3D..and I hope I will get used to install new ones ..
ramjet73 said:
Some people still seem to unlock the bootloader after gaining S-OFF so they can run fastboot commands like "flash" and "erase". If you try to run those commands with a locked bootloader you will get the "failed: remote not allowed" error even with radio S-OFF.
The wire trick leaves the bootloader locked, but choosing the JBear hboot or flashing another custom version (engineering or Revolutionary) is a better way to get access to those commands than unlocking the bootloader again.
ramjet73
Click to expand...
Click to collapse
what would we do without you sir. I learn something new here everyday

[Q] HBOOT and Unlocking

So I recently got a hold of a rezound and it came with S-OFF and an unlocked 2.25 HBOOT. I have a couple of questions about upgrading:
1. Does keeping the HBOOT unlocked have any benefits besides extra fastboot commands (which I'll never use)?
2. How can I upgrade to the 2.27 HBOOT with my phone's current status (unlocked with S-OFF).
3. Are there any benefits to having the unlocked 2.27 HBOOT that vinylfreak released over the stock HBOOT?
Thanks in advance for the help. I've been paging through this forum and there is a lot of fragmented information floating around that's both new and old so it can be hard to make sense of it all.
polarEskimo said:
So I recently got a hold of a rezound and it came with S-OFF and an unlocked 2.25 HBOOT. I have a couple of questions about upgrading:
1. Does keeping the HBOOT unlocked have any benefits besides extra fastboot commands (which I'll never use)?
2. How can I upgrade to the 2.27 HBOOT with my phone's current status (unlocked with S-OFF).
3. Are there any benefits to having the unlocked 2.27 HBOOT that vinylfreak released over the stock HBOOT?
Thanks in advance for the help. I've been paging through this forum and there is a lot of fragmented information floating around that's both new and old so it can be hard to make sense of it all.
Click to expand...
Click to collapse
1. You can flash kernels in recovery and not HBOOT, you can also install a different splash screen logo (downside. you can brick the phone because there is zero security now. "S" in on or off means security)
2. you can update the HBOOT to 2.27 without any problems by downloading one from the develop section and it wont hurt the phone. link
3. HBOOT 2.27 was meant for the global update. if you dont plan on leaving the U.S. or use the phone for gsm then there isnt a need to update.
polarEskimo said:
So I recently got a hold of a rezound and it came with S-OFF and an unlocked 2.25 HBOOT. I have a couple of questions about upgrading:
1. Does keeping the HBOOT unlocked have any benefits besides extra fastboot commands (which I'll never use)?
2. How can I upgrade to the 2.27 HBOOT with my phone's current status (unlocked with S-OFF).
3. Are there any benefits to having the unlocked 2.27 HBOOT that vinylfreak released over the stock HBOOT?
Thanks in advance for the help. I've been paging through this forum and there is a lot of fragmented information floating around that's both new and old so it can be hard to make sense of it all.
Click to expand...
Click to collapse
I would run newest ruu with 2.27 hboot and flash a custom rom.
Damasterjj said:
I would run newest ruu with 2.27 hboot and flash a custom rom.
Click to expand...
Click to collapse
Can I run it with S-OFF and unlocked? I read somewhere that if you use an official RUU on an unlocked HBOOT that you could brick your phone. Will running the RUU re-lock the bootloader after upgrading? Thanks for the help
You can't ever brick your phone running an ruu unless its a bad ruu. To ruu though.. your phone must be relocked using fastboot. What you're thinking of is if you s-on with a modified hboot then you brick. You're good though.
1. Relock with fastboot oem lock
2. Run RUU
3. Honestly there's not much reason to unlock again
Sent from my ADR6425LVW using Tapatalk 2
polarEskimo said:
Can I run it with S-OFF and unlocked? I read somewhere that if you use an official RUU on an unlocked HBOOT that you could brick your phone. Will running the RUU re-lock the bootloader after upgrading? Thanks for the help
Click to expand...
Click to collapse
OK so unlocked and locked boot loaders mean you can use fast boot commands. If you ruu to the newest you will loose fast boot commands unless you unlock or flash an engineering hboot.
If you ever wanted to update after you have unlocked, you must relock the boot loader before updating. Ie never ruu on an unlocked hboot
Sent from my iPhone...
Don't bother updating hboot, it will net you nothing. I've been running 2.25 hboot with the new radios since the 4.03.605.2 leak. 0 issues and runs VERY well. Also unlocked on a patched/eng hboot means nothing, can run the same commands the same way with it being locked. Although a stock hboot may need to be unlocked to get access to some of those commands, of which will probably be of no use to you anyways.
@Syn
S-off shouldnt need a re-lock/unlock to update ANYTHING in hboot with a ph98img.
Snuzzo said:
Don't bother updating hboot, it will net you nothing. I've been running 2.25 hboot with the new radios since the 4.03.605.2 leak. 0 issues and runs VERY well. Also unlocked on a patched/eng hboot means nothing, can run the same commands the same way with it being locked. Although a stock hboot may need to be unlocked to get access to some of those commands, of which will probably be of no use to you anyways.
@Syn
S-off shouldnt need a re-lock/unlock to update ANYTHING in hboot with a ph98img.
Click to expand...
Click to collapse
Learned something new. Thanks.
Sent from my iPhone...

Categories

Resources