Hi guys,
I really need your help !!!
This is the story:
I tried to flash with odin (v3.07).
At first I checked these boxes:
1. Auto Reboot
2. F. Reset Time
3. Nand Erase all
And flashed. Until it got stuck for quite some time in "SetupConnection..."
Then I disconnected the phone and reinserted it to download mode.
I tried to flash again but know with these checked boxes:
1. Auto Reboot
2. F. Reset Time
3. Re-Partition
It got stuck again in "NAND.. " (something - I don't remember exactly)
Again I disconnected the phone.
From that moment it wouldn't turn on no matter what I did And wouldn't charge. (BTW the battery was 85% when I started everything)
I tried many (!) methods I found online: Taking the battery out / put it in the freezer for 10 mins / reinsert it while pressing ON button / ON + HOME ...
Nothing helps..
What is the problem?
Tried to specify as much as I could...
I really need your help!!!
What should I do in order for it to work again??
Thanks
iZiv said:
Hi guys,
I really need your help !!!
This is the story:
I tried to flash with odin (v3.07).
At first I checked these boxes:
1. Auto Reboot
2. F. Reset Time
3. Nand Erase all
And flashed. Until it got stuck for quite some time in "SetupConnection..."
Then I disconnected the phone and reinserted it to download mode.
I tried to flash again but know with these checked boxes:
1. Auto Reboot
2. F. Reset Time
3. Re-Partition
It got stuck again in "NAND.. " (something - I don't remember exactly)
Again I disconnected the phone.
From that moment it wouldn't turn on no matter what I did And wouldn't charge. (BTW the battery was 85% when I started everything)
I tried many (!) methods I found online: Taking the battery out / put it in the freezer for 10 mins / reinsert it while pressing ON button / ON + HOME ...
Nothing helps..
What is the problem?
Tried to specify as much as I could...
I really need your help!!!
What should I do in order for it to work again??
Thanks
Click to expand...
Click to collapse
So you can`t get into Download Mode?
And wait a second you put your phone in the freezer for 10 minutes???
Edit: How many parts did your firmware have? 1 part or 3 parts?
If it was a 1 part firmware (Only PDA File) and you checked Re-partition then it`s possible that you bricked your phone.
If you can`t go into Download mode then the last thing you can try is to buy a USB Jig and try get into Download mode with it. If this doen`t help then Samsung service center is probably the way to go.
I can't get it to turn on which means no download mode.
I put the battery in the freezer as I read somewhere...
I don't think I have a descent samsung service in my country. I need to check...
My firmware had 2 parts:
A .pit file and a PDA(.zip file)
why did you check re partition mate...you could have at least taken time to search for a flashing guide...
this guy ended up like you.. check the last post
what-do-i-do-if-i-checked-repartition-odin
iZiv said:
I can't get it to turn on which means no download mode.
I put the battery in the freezer as I read somewhere...
I don't think I have a descent samsung service in my country. I need to check...
My firmware had 2 parts:
A .pit file and a PDA(.zip file)
Click to expand...
Click to collapse
What Firmware did you flash, a link or the exact name of the Firmware would be nice.
What happens if you run Odin and then Plug your device into USB? Does Odin recognize that your phone is connected or nothing happens? If nothing happens then try to buy the USB Jig and plug it in and see if you can get into Download Mode.
anto.danny said:
why did you check re partition mate...you could have at least taken time to search for a flashing guide...
this guy ended up like you.. check the last post
what-do-i-do-if-i-checked-repartition-odin
Click to expand...
Click to collapse
True that, I heard several times that guys have bricked their phone of Re-Partition because of missing or wrong Pit File.
Never use pit and repartition with 1file rom. Repartition must be made with 3 file firmware. And of course proper .pit.
--
i9.0.1.3k galaxy imperator
Scarface1991 said:
What Firmware did you flash, a link or the exact name of the Firmware would be nice.
What happens if you run Odin and then Plug your device into USB? Does Odin recognize that your phone is connected or nothing happens? If nothing happens then try to buy the USB Jig and plug it in and see if you can get into Download Mode.
True that, I heard several times that guys have bricked their phone of Re-Partition because of missing or wrong Pit File.
Click to expand...
Click to collapse
This is the name of the .zip file I used in PDA: I9100TJILP9_I9100TCELLP9_I9100TJILP9
Which I downloaded it from here: http://forum.xda-developers.com/showthread.php?p=16711188#post16711188
This is the name of the .pit file I used: omap4_all_20110627_emmc.pit
Which I downloaded from here : http://forum.xda-developers.com/showthread.php?t=1448765
BTW I know I shouldn't have checked the re-partition box. This was by accident...
iZiv said:
This is the name of the .zip file I used in PDA: I9100TJILP9_I9100TCELLP9_I9100TJILP9
Which I downloaded it from here: http://forum.xda-developers.com/showthread.php?p=16711188#post16711188
Click to expand...
Click to collapse
That is a firmware file for an I9100T.
iZiv said:
This is the name of the .pit file I used: omap4_all_20110627_emmc.pit
Which I downloaded from here : http://forum.xda-developers.com/showthread.php?t=1448765
BTW I know I shouldn't have checked the re-partition box. This was by accident...
Click to expand...
Click to collapse
And THAT is an OMAP .pit file, which is for the I9100G.
What is your phone's actual model number? (look on the label under the battery)
You're probably looking at a JTag job at the least, or a visit to a Samsung service center... Nothing you can do if you flashed an I9100G .pit file to an I9100, or I9100T.
ctomgee said:
That is a firmware file for an I9100T.
And THAT is an OMAP .pit file, which is for the I9100G.
What is your phone's actual model number? (look on the label under the battery)
You're probably looking at a JTag job at the least, or a visit to a Samsung service center... Nothing you can do if you flashed an I9100G .pit file to an I9100, or I9100T.
Click to expand...
Click to collapse
The lable says:
MODEL : GT-I9100
SSN : I9100GSMH
So what do I do?
What is a "JTag job"?
iZiv said:
The lable says:
MODEL : GT-I9100
SSN : I9100GSMH
So what do I do?
What is a "JTag job"?
Click to expand...
Click to collapse
So you flashed an i9100G .pit file to an i9100. That completely buggers it, you can do nothing at this point, except what I said. JTag, or Samsung service center.
JTag is a service where a qualified technician solders leads from a riff box to the motherboard of your phone, to reformat the phone. This will USUALLY end up being cheaper than going to a Samsung service center.
Though, if your device is still under warranty, you could just try sending it in for warranty service and playing dumb. (i.e. not telling them you were flashing stuff)
iZiv said:
The lable says:
MODEL : GT-I9100
SSN : I9100GSMH
So what do I do?
What is a "JTag job"?
Click to expand...
Click to collapse
There is a good chance you screwed up your bootloader because you inserted a wrong Pit File (I9100G Pitfile although you have a normal I9100) and checked Re-Partition.
Like ctomgee said,If the Bootloader is screwed you need someone with a so called Jtag to flash a working bootloader on your device. You can bring it to a Samsung Service Center or find someone (Maybe even here on XDA) who will do this for you.
ctomgee said:
So you flashed an i9100G .pit file to an i9100. That completely buggers it, you can do nothing at this point, except what I said. JTag, or Samsung service center.
JTag is a service where a qualified technician solders leads from a riff box to the motherboard of your phone, to reformat the phone. This will USUALLY end up being cheaper than going to a Samsung service center.
Though, if your device is still under warranty, you could just try sending it in for warranty service and playing dumb. (i.e. not telling them you were flashing stuff)
Click to expand...
Click to collapse
Ok. I found someone who can JTag my device. (I hope he knows what he's doing...)
I will update this post next week.
Thanks everyone for your help!! :good:
Same problem here
I have exactly the same problem, but my pit file was u1_02_20110310_emmc_EXT4.pit.......i check repartition and my phone is dead now, anyone have a solution to this problem?????????????:crying:
alvavaca said:
I have exactly the same problem, but my pit file was u1_02_20110310_emmc_EXT4.pit.......i check repartition and my phone is dead now, anyone have a solution to this problem?????????????:crying:
Click to expand...
Click to collapse
Yeah, service center.
Sent from the little guy
alvavaca said:
I have exactly the same problem, but my pit file was u1_02_20110310_emmc_EXT4.pit.......i check repartition and my phone is dead now, anyone have a solution to this problem?????????????:crying:
Click to expand...
Click to collapse
I eventually did a JTag.
Fixed the problem.
Related
Hi Folks,
after trying to flash the SGS-2, the phones screen is still black and doesnt
get powered on by pressing the power button, no boot, no screen. Odin dont
know about the phone - no usb connection
any suggestion what i can do?
Recovery mode or download mode ?????
jje
JJEgan said:
Recovery mode or download mode ?????
jje
Click to expand...
Click to collapse
no, nothing. still black screen / no power.
i think, my mistake was a wrong .pit - i was using the 512.pit, i'm a sgs2 noob ^^
afaik, you do not flash PIT for this phone, ever.
Try removing the battery, then turning on, download mode, recovery etc. If that doesn't work, you're screwed.
Try purchasing a jig. To be honest though, it sounds hard bricked. When you plug it into a power source and try to power it on if nothing at all happens that's usually a bad sign.
To offer you saving point, there are two or three places on the web that offer Jtag services which rewrite the default boot loader.
What were you doing when this happened?
Did the flash complete successfully?
These things are hard to brick although not impossible.
Edit: Oh, just saw the pit reference. Ouch, you are going to need Jtag, friend.
andy572 said:
no, nothing. still black screen / no power.
i think, my mistake was a wrong .pit - i was using the 512.pit, i'm a sgs2 noob ^^
Click to expand...
Click to collapse
Dead as a dodo, jtag or RMA and hope they don't notice, say it was a failed kies flash or something.
andy572 said:
no, nothing. still black screen / no power.
i think, my mistake was a wrong .pit - i was using the 512.pit, i'm a sgs2 noob ^^
Click to expand...
Click to collapse
No instructions to flash a 512 PIT file for the SGS1 phone its a totally different PIT.Same as putting the wrong fuel in the tank .
jje
You won't be debrick it at home, only JTAG equipment can help you now. Either send it to a Samsung Service center, tell them you were updating through Kies and hope they don't notice or find a Repair Service with JTAG equipment and have them debrick it.
i wonder something why is a 512.pit file in the update pack (was rar compressed) as the FW is for SGS-2 but not SGS-1 ?!
tomorrow i send the phone to the service center, i can say it was a failure in kies - most pplz are writing this and dont have to pay something^^
andy572 said:
i wonder something why is a 512.pit file in the update pack (was rar compressed) as the FW is for SGS-2 but not SGS-1 ?!
tomorrow i send the phone to the service center, i can say it was a failure in kies - most pplz are writing this and dont have to pay something^^
Click to expand...
Click to collapse
You should ask the person who put it in the firmware pack... I haven't seen any downloads on XDA which contain the 512.pit file. Infact if you would've taken the time to read up on some threads here at XDA you would've known most experienced users advise and actively warn against using a pit file.
andy572 said:
no, nothing. still black screen / no power.
i think, my mistake was a wrong .pit - i was using the 512.pit, i'm a sgs2 noob ^^
Click to expand...
Click to collapse
Bricked! You'll need to get it repaired by Samsung or some place with a JTAG box.
thanks for all answers here
i dont have downloaded the firmware from xda but from samfirmware.com and a wrong odin version with that **** pit file ...
... and readed the wrong tut about flashing a SGS-2 - think this was the most mistakes i've made ...
now its realy bricked and i'll see if i can send to a service center tomorrow.
i hope repair is for free ...
Hi All,
I tried to flash my friends i9100 (it had arabic 2.3.4 firmware, but i didn't write down the exact firmware number), to I9100JPKI1 2.3.5 1 file update. But it gave "FAIL" result in ODIN. After that phone got stuck on Download screen. I removed battery and restarted the phone. And after it got stuck on the following screen (pic at the end of post)
I tried to flash it again by odin but it's not flashing (Attached pic of ODIN after unsuccessful flash below). Any ideas how to restore the phone?
it seems connectivity problem. Have you tried another USB or another USB cable?
Yes, tried different cables on different computers. The phone is booting with this phone-warning triangle-computer logo immediately. Even samsung logo is not coming before it.
Are you able to access recovery mode? If yes, try to do a full wipe.
EDIT: Try to Kill all process of Kies, and see if Odin recognize your phone
No, it's stuck on this screen. i can't put it in Download mode. Even if i start it: Volume Down+Home+Power this screen is coming.
ODIN can't recognize the phone.
Ouch, I see repartition and a PIT file, that usually means the phone is really dead; a job for the service centre.
Which guide did you use?
limon11 said:
Yes, tried different cables on different computers. The phone is booting with this phone-warning triangle-computer logo immediately. Even samsung logo is not coming before it.
Click to expand...
Click to collapse
Maybe some file are corrupted. Try to follow these steps:
[READ THIS] Got a Boot Loop? Don't post a New Thread!
[ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download
meranto said:
Ouch, I see repartition and a PIT file, that usually means the phone is really dead; a job for the service centre.
Which guide did you use?
Click to expand...
Click to collapse
On the first flashing (after which it became like this) i didn't do repartitioning and didn't use PIT file. Just selected PDA file.
meranto said:
Ouch, I see repartition and a PIT file, that usually means the phone is really dead; a job for the service centre.
Which guide did you use?
Click to expand...
Click to collapse
I didn't see that...maybe only service center can do this job
I tried to follow following guide: http://forum.xda-developers.com/showthread.php?t=1108499.
Did
1) Turn off your phone. Unplug it from your computer etc
2) Hold down home, power, and volume UP. This will enter recovery mode. If you are using CF-Root, you'll get CWM recovery. If not, you get stock recovery. It doesn't matter which appears.
BUT phone is not going into recovery mode.
limon11 said:
I tried to follow following guide: http://forum.xda-developers.com/showthread.php?t=1108499.
Did
1) Turn off your phone. Unplug it from your computer etc
2) Hold down home, power, and volume UP. This will enter recovery mode. If you are using CF-Root, you'll get CWM recovery. If not, you get stock recovery. It doesn't matter which appears.
BUT phone is not going into recovery mode.
Click to expand...
Click to collapse
I think that you need to leave the phone to Service Center.
The thing is that the phone was bought in another country, so there is no warranty in my country for it. That's why i'm searching for solution myself.
limon11 said:
The thing is that the phone was bought in another country, so there is no warranty in my country for it. That's why i'm searching for solution myself.
Click to expand...
Click to collapse
I had a problem weeks ago with my phone too. Tried a lot of things and nothing fix the problem. But when i was losing hope, i found the solution by myself.
My problem was only IMEI number and i recovered it. I think that your best choice is read a lot before take some decision. And the most recommended choice is leave the phone to Service center.
Good luck!
Maybe JIG will be useful to put the phone into DOWNLOAD mode?
P.S. : I am keeping going to Service Centre options as a last resort.
If there is any way to get Odin to recognize your phone there is still hope. Try to get into download mode in all possible ways, sometimes it seems lost but suddenly you get in. Make sure Kies is not running in the background.
If you cannot get into download mode, even with a jig, and Odin never recognizes the phone, it is a job for service centre or JTAG or something, but not yourself.
limon11 said:
Maybe JIG will be useful to put the phone into DOWNLOAD mode?
P.S. : I am keeping going to Service Centre options as a last resort.
Click to expand...
Click to collapse
JIG maybe work
OK. I made very big mistake in the begining. the phone model was i9100g and i flashed it with i9100 firmware. that's seems the cause of the hang.
limon11 said:
OK. I made very big mistake in the begining. the phone model was i9100g and i flashed it with i9100 firmware. that's seems the cause of the hang.
Click to expand...
Click to collapse
That messed up your phone dude.. Can you still put your phone into download mode?
Sent from my GT-I9100 using xda premium
Finally, Alhamdulillah, i solved my problem of i9100g flashed with i9100 firmware. First to go out from "phone - yellow label - computer" mark i flashed it with i9100g original kernel Kernel_I9100GDZKI1 from http://forum.xda-developers.com/showthread.php?t=1276105&page=3. after that it became possible to put the phone into download mode. after that i flashed it with ODIN USING PIT FILE FOR OMAP4 from the same forum and with i9100G new firmware. and that's all, phone is working again.
Hi all!
Firstly I wanted to apologize if I do not post in correct area.
I have a big problem,I put on fit a home bussiness with update software for the GS2
Today somethig very strange happend to me.
I wanted to upgrade the GS2 to ICS XXPLQ I used this guide http://www.theandroidsoul.com/xxlpq/
I put put the tar file in PDA and pit512 in PIT and I hit the start button,after awhile the its tells that the operation failed.
I pulled out the battery,and when I wanted to start the phone,nothing happed,it won't start,I tryed eved with an OTG cable,but there is nothing to do. he won't start,I just don't know what to do...there is hardaware problem?
Please I despertly need your help.
Did you really develop this?
Sent from my GT-I9100 using xda premium
Why did you put pit512 file in PDA section? Boot in download mode and flash rom again.
It won't boot
It is just death,no matter what I do
The pit file I put in Pit area,I'm sure about this
Do you have usb jig?
cmiui said:
Hi all!
Firstly I wanted to apologize if I do not post in correct area.
I have a big problem,I put on fit a home bussiness with update software for the GS2
Today somethig very strange happend to me.
I wanted to upgrade the GS2 to ICS XXPLQ I used this guide http://www.theandroidsoul.com/xxlpq/
I put put the tar file in PDA and pit512 and I hit the start button,after awhile the its tells that the operation failed.
I pulled out the battery,and when I wanted to start the phone,nothing happed,it won't start,I tryed eved with an OTG cable,but there is nothing to do. he won't start,I just don't know what to do...there is hardaware problem?
Please I despertly need your help.
Click to expand...
Click to collapse
The hardware problem is between your ears .
One this is DEVELOPMENT post in Q&A .
Two you have followed instructions from XX forum why not ask them for advice .
Three are you sure you have i9100 phone as that PIT is not for this phone .
Likewise did you flash i9100 firmware .
You have a bricked phone .
Can you get to download mode if so flash a stock GB rom from stock rom thread to get the phone working .
No download mode two choices find a JTAG repair it will be cheaper than a Samsung repair . Alternative take to Samsung service and hope they dont charge but repair under warranty .
jje
cmiui said:
The pit file I put in Pit area,I'm sure about this
Click to expand...
Click to collapse
Here was mistake, Important! Do not touch any other button or make any other changes in Odin except selecting the required file as given in step 8. Why did you touch PIT button???
Pit.
When you flash tar you must not set pit for flashing. Remove battery for hour or more than put it back ,try to go in download mode , if that doesnt work find some usb jig to help you put the phone in download mode.
I'm sorry because posted here...and I thank you for you answer.
You may have right about the way I put the PIT file
can you please tell me where I can get the JTAG repair?
JJEgan said:
The hardware problem is between your ears .
One this is DEVELOPMENT post in Q&A .
Two you have followed instructions from XX forum why not ask them for advice .
Three are you sure you have i9100 phone as that PIT is not for this phone .
Likewise did you flash i9100 firmware .
You have a bricked phone .
Can you get to download mode if so flash a stock GB rom from stock rom thread to get the phone working .
No download mode two choices find a JTAG repair it will be cheaper than a Samsung repair . Alternative take to Samsung service and hope they dont charge but repair under warranty .
jje
Click to expand...
Click to collapse
mcnaget said:
When you flash tar you must not set pit for flashing. Remove battery for hour or more than put it back ,try to go in download mode , if that doesnt work find some usb jig to help you put the phone in download mode.
Click to expand...
Click to collapse
I used JIG usb,didn't work
cmiui said:
I'm sorry because posted here...and I thank you for you answer.
You may have right about the way I put the PIT file
can you please tell me where I can get the JTAG repair?
Click to expand...
Click to collapse
Search on google and you`ll find in you country(trebuie sa fie asa ceva la voi)
Did you really develop this?
Sent from my GT-I9100 using xda premium
PIT 512 Samsung Galaxy file only from memory its a totally different PIT for SGS2 .
jje
Hi !
Any one can help ?
I flash my I9100 erroneously wrong PIT :crying:
The wrong was >>> Galaxy i9100G compatible PIT File > omap4_all_20110627_emmc.pit
right one is:
u1_02_20110310_emmc_EXT4.pit
Now...
No boot and phone not turn on.
Only jtag/USB Jig helps or possible to repair via usb cable ?
Some tricks or something ?
Maybe helps
http://galaxys2root.com/galaxy-s2-hacks/how-to-make-a-usb-jig-for-your-galaxy-s2/ ?
Thanks !
http://forum.xda-developers.com/showthread.php?t=1814801
If the phone & PC recognise each other via Odin, you could try flashing a full rom package with a pit.
If they don't, you're out of luck. Nothing you can do will fix it. JTAG or service centre. Take your pick.
MistahBungle said:
If the phone & PC recognise each other via Odin, you could try flashing a full rom package with a pit.
If they don't, you're out of luck. Nothing you can do will fix it. JTAG or service centre. Take your pick.
Click to expand...
Click to collapse
Phone not turn on at all.
Odin cannot detect
Is it worth a try usb jig ?
Doubt a jig will work. If you can get or make one easily (lots of tutorials on Google/here showing you how to make one), you might as well try it. But if it's going to take you a couple of weeks to get one, you're probably going to be delaying getting your phone fixed for something that has a 1% (realistically a lot less) chance of working at best.
Hello all!
Yesterday I started to 1st time flash my 9100g to presumably "original" firmware (I9100GXXLSR_I9100GXXLSP_I9100GDBTLS1_HOME.tar) with the before mentioned firmware and a PIT I've found somewhere in a forum together with 1.85 Odin (u1_02_20110310_emmc_EXT4) for that phone. Unfortunately it seems that I "killed" (Hard or Soft bricked - don't know) my phone (So far I remember I switched Nand erase by lack of attention also, but stopped before complete).
Now the phone starts only in "Phone-exclamation-PC" mode ever and ever again - even with a JIG. Odin 3 and 1.85 recognizes the phone, but don't get further than "Setup Connection". Sometimes I get a connection after I used Jig (still at that showing that exlamation screen), and can flash something, but not always. Kies doesn't get a connection.
So my questions:
1. Is it completely bricked?? (meaning: Sending to Samsung)
3. If not, how can I recover it? (I Don't know, but looks like a kernel startup problem, evtl. wrong PIT)
2. If yes, can someone tell me how much one have to pay for repair in average?
(Before that I made a complete flash/nand mem backup by su and dd of this phone on a 16GB USB Stick - can I use that somehow?)
peteralliston said:
Hello all!
Yesterday I started to 1st time flash my 9100g to presumably "original" firmware (I9100GXXLSR_I9100GXXLSP_I9100GDBTLS1_HOME.tar) with the before mentioned firmware and a PIT I've found somewhere in a forum together with 1.85 Odin (u1_02_20110310_emmc_EXT4) for that phone. Unfortunately it seems that I "killed" (Hard or Soft bricked - don't know) my phone (So far I remember I switched Nand erase by lack of attention also, but stopped before complete).
Now the phone starts only in "Phone-exclamation-PC" mode ever and ever again - even with a JIG. Odin 3 and 1.85 recognizes the phone, but don't get further than "Setup Connection". Sometimes I get a connection after I used Jig (still at that showing that exlamation screen), and can flash something, but not always. Kies doesn't get a connection.
So my questions:
1. Is it completely bricked?? (meaning: Sending to Samsung)
3. If not, how can I recover it? (I Don't know, but looks like a kernel startup problem, evtl. wrong PIT)
2. If yes, can someone tell me how much one have to pay for repair in average?
(Before that I made a complete flash/nand mem backup by su and dd of this phone on a 16GB USB Stick - can I use that somehow?)
Click to expand...
Click to collapse
1. It definitely looks like a Service Centre job, but I may be wrong. The "phone-exclamation-PC" is a type of download mode. So that means you only have soft brick, and not a hard one.
2. Yup, wrong PIT it is. You should be careful before flashing PIT files mate. You can try flashing stock firmwares via Odin to see if anything succeeds. But I doubt it will.
3. It is usually the cost of a new motherboard + service charges.
For better answers and guidance, you should state your issue here:
http://forum.xda-developers.com/showthread.php?t=1585413
1. It definitely looks like a Service Centre job, but I may be wrong. The "phone-exclamation-PC" is a type of download mode. So that means you only have soft brick, and not a hard one.
2. Yup, wrong PIT it is. You should be careful before flashing PIT files mate. You can try flashing stock firmwares via Odin to see if anything succeeds. But I doubt it will.
Click to expand...
Click to collapse
Thanks! Yes.
So, a WARNING from me: The PIT "u1_02_20110310_emmc_EXT4.pit" for the phone version "I9100GXXLSR_I9100GXXLSP_I9100GDBTLS1_HOME.tar" which is posted in some forums, IS WRONG!
CORRECT ONE IS: "omap4_all_20110627_emmc.pit" (Here attached; MD5: 8fd1dd2630dd844abe9183203fa438f7)
For better answers and guidance, you should state your issue here:
http://forum.xda-developers.com/showthread.php?t=1585413
Click to expand...
Click to collapse
'll do