help please - Galaxy S II Q&A, Help & Troubleshooting

Hi
please help
I just flashed a new stock ROM for my gs2g device with the latest 4.0.4 pakistan vesion (jplp9) using Mobile Odin Pro (latest version) after installing it is stock in the green android logo and after rebooting it does not start up. by pressing the power button or plugging the charger again it goes to the green android picture and allows me 5 choices: including reboot, wipe data, wipe chache.my previous firmware was 2.3.6 jplc1 rooted with streetware kernel. I tried to post at the i9100g part of the forum but the forum didn't permit posting there.
What should I do now?!

You should try to perform update via Odin if you were on GB. Mobile odin doesn't flash bootloader.
But in the recovery which is open as you described try to wipe/factory reset and check if this helped. If not you should use Odin and flash stock firmware first.
i9.0.1.3k galaxy imperator

Ipersian said:
Hi
please help
I just flashed a new stock ROM for my gs2g device with the latest 4.0.4 pakistan vesion (jplp9) using Mobile Odin Pro (latest version) after installing it is stock in the green android logo and after rebooting it does not start up. by pressing the power button or plugging the charger again it goes to the green android picture and allows me 5 choices: including reboot, wipe data, wipe chache.my previous firmware was 2.3.6 jplc1 rooted with streetware kernel. I tried to post at the i9100g part of the forum but the forum didn't permit posting there.
What should I do now?!
Click to expand...
Click to collapse
Hi there when you say you are seeing the green android logo I persume that ur in download mode power on +vol down+home buttn form there why don't you go to samfirmware.com and download the pakistani v of ics 4.0.3 for i9100g.
Because im pakistani ill give you a a link lol
http://www.hotfile.com/dl/168412584/9726061/I9100GJPLP9_I9100GOJPLP6_PAK.zip.html
Download odin and flash the file to the pda box of odin and walah your back on it

Thanks. Here was the solution:i simply flashed the 4.0.4 version through odin and it all worked.
Sent from my GT-I9100G using Tapatalk 2

Related

[Q] Kernel Panic, Upload mode

Hi, I'm basically from India.. I have a GT-I9100 which was bought from Singapore.. and I have my kernel from open Europe(I9100XXLP1_I9100OXALP1_OXA) android (4.0.4)... when I tried rooting my phone using Cf root..it shows Kernel panic, upload mode.. and all I have to do is flash my phone again.. my phone does not start if I flash any other firmware..even the singapore firmware(I9100DXLP9_I9100OLBLP9_XSP). Could it be a bootloop? could someone please help me regarding this bootloop and kernel panic?
rooneyvignesh said:
Hi, I'm basically from India.. I have a GT-I9100 which was bought from Singapore.. and I have my kernel from open Europe(I9100XXLP1_I9100OXALP1_OXA) android (4.0.4)... when I tried rooting my phone using Cf root..it shows Kernel panic, upload mode.. and all I have to do is flash my phone again.. my phone does not start if I flash any other firmware..even the singapore firmware(I9100DXLP9_I9100OLBLP9_XSP). Could it be a bootloop? could someone please help me regarding this bootloop and kernel panic?
Click to expand...
Click to collapse
XXLP1 is Android 4.0.3 and it's "old" => one of the first ICS ROMs Samsung released for the SGS2.
So, I would recommend to flash a newer version, such as XWLPD.
First check Download mode:
If you can boot into download mode (Volume down + Home + Power), then you can flash another ICS ROM with Odin to your phone.
Have a look at Intratech's Firmware thread for Official Firmwares (non-wipe) and a description of how to flash => http://forum.xda-developers.com/showthread.php?t=1075278
If you have issues after flashing, try to boot into recovery mode (press Volume UP + Home + Power as long as the recovery menu appears).
There you can wipe cache partition and do a factory reset.
After successful flashing a new ICS ROM, you can use the corresponding CF-Root kernel from Chainfire to root your phone again.
Good luck!
rooneyvignesh said:
Hi, I'm basically from India.. I have a GT-I9100 which was bought from Singapore.. and I have my kernel from open Europe(I9100XXLP1_I9100OXALP1_OXA) android (4.0.4)... when I tried rooting my phone using Cf root..it shows Kernel panic, upload mode.. and all I have to do is flash my phone again.. my phone does not start if I flash any other firmware..even the singapore firmware(I9100DXLP9_I9100OLBLP9_XSP). Could it be a bootloop? could someone please help me regarding this bootloop and kernel panic?
Click to expand...
Click to collapse
keep your battery out atleast for 2-3 hours, then try entering download mode again by pressing Vol-Down + Home + Power

HELP S2 not turning on

hello,
my phone is acting wierd
it boots till that yellow caution incon then again restarts
i was on rootbox and installed cm7 and not booting to recovary but can boot into download mode
after rebooting this happed
some one please help me
thank you
Are you still on CM7?
Does it still go into recovery? Have you tried clearing data/cache?
How much battery was it on when this happened? If low leave it charging for a bit and then try it on whilst charging.
Try a stock samsung firmware if anything else fails to let it boot.
Hi
what i did is
used rom cleaning script and installed CM7 and gave reboot
phone turns on till that yellow triangle (main screen where samsung S2 comes) and restarts
cant go to recovary mode
from where can i download odin flashables?
should i try flashing with odin is it safe?
please im not in position to buy a phone
Have you tried to go to the stock rom first?
1. Download the stock rom of your phone. 4.0.3
2. Download Odin
3. press the sleep buttom, home buttom and the volume up.
4. wipe the cache and do a factory reset after that turn off your phone. (alternative)
5. Press sleep buttom, home buttom and volume down then you'll get to download mode.
6. put in the usb cabel on your phone and the pc.
7. Then it will connect to the pc and odin.
8. extract the stock rom and have it on your desktop.
9. now on odin press on PDA and select the file.
10.now press start.
Everything should go smooth so after that you can install cf root and if you did a backup you can restore it, unless you had it on the internal storage.
(dont forget to do a nandroid or cwm backup before installing rom into your external storage!
i dont know from where i can get odin flashables
i called my phone and got build info
Android 4.0.3
IML7K.XWLP7
DDLPA
My phone : I9100
Country : India
Thank you
If you skip the recovery part you should be able to restore internal backup
Did you wipe data when you flashed cm7?
Its necessary.
Sent from my GT-I9100 using Tapatalk 2
Somebody help this guy quick! He's in the wrong section!
You can download odin flashable's here: http://forum.xda-developers.com/showthread.php?t=1544487 and here: http://www.samfirmware.com/ and also here: http://forum.xda-developers.com/showthread.php?t=1075278
Try to flash an ROM from India, or if you flash a ROM from a different country or region and you have problems with your network you can try and flash a modem which works specific in India
if you want the stock rom just go to samfirmware.com and download there unfortunately i cant send the link because i need to post 10 posts
Dont forget you need to sign up an account on samfirmware to download firmware
Think u need this one
http://www.sammobile.com/firmware/?page=8&view=4552
Sent from my GT-I9100 using xda premium
downloading firmware .. still 1 hour to go
fingers crossed and tensed hope ill get my phone back
Good luck and please hit the thanks buttom on my instruction:laugh:
I thought CM7 is for Gingerbread? And you have ICS rom? It won't work!
all you need to know and download is on this site
Thank you guys
Phone is working again
Sent from my GT-I9100 using Tapatalk 2

[Q] ICS 4.0.4 problem

Hi All,
I am new and this is my first post,
I am from Egypt and i received update on Kies for the new ICS version 4.0.4 and i after installation i have the attached on my screen and can not remove. Also my SII is misbehaving and restarts on his own.
Note: i am using the official updates.
Also attached screen shot about the phone.
Please support, and Thank you All
M. Fawzy
Flashed official 4.0.4 many times and never had problem like this. I do suggest you:
1. Install custom kernel via stock recovery
2. Backup android apps.
3. do factory/data reset in custom recovery mode (power button+menu+volume up)
3. Download official 4.0.4 firmware from sammobile.com
4. Flash it via usb cable , using ODIN application.
more details for custom kernels, odin flash instruction, use search xda forum in general,development sections. More info here http://forum.xda-developers.com/showthread.php?t=1075278
Theres tons of posts about this.Search about creating a file called "keystr".

S2 stuck at boot screen

Currently stuck at the "Samsung Galaxy S II" logo during boot and it won't go past that. I can't seem to get into recovery mode, but I can access download mode.
I was using Shostock v3.0.2 (latest) and the Jeboo 1.3b Kernel.
SuperSU had an update and I accidentally pressed "twrp/cwm" instead of "normal" which made my phone reboot and has been stuck at the Samsung logo at boot up since then. When going into download mode, it shows that the current binary is "Samsung Official".
Would I have to use Kies to restore the phone back to factory or is there any other workarounds to get it to work again?
Thanks in advance!
You don't have to use Kies, but since it won't boot into recovery, you will have to load stock firmware. Your options are Kies if it will restore the phone, or, since you can get into download mode, flash the stock firmware with Odin.
If it were me, I would flash 4.0.4 UCLL6 plus root from the development forum using Odin3 v1.85, and then install Mobile Odin lite or Mobile Odin pro, and flash one of the custom kernels that are linked in the OP of that thread. Then you can load and flash SHOstock 3.0.2 again if you want.
creepyncrawly said:
You don't have to use Kies, but since it won't boot into recovery, you will have to load stock firmware. Your options are Kies if it will restore the phone, or, since you can get into download mode, flash the stock firmware with Odin.
If it were me, I would flash 4.0.4 UCLL6 plus root from the development forum using Odin3 v1.85, and then install Mobile Odin lite or Mobile Odin pro, and flash one of the custom kernels that are linked in the OP of that thread. Then you can load and flash SHOstock 3.0.2 again if you want.
Click to expand...
Click to collapse
Alright I will try out your recommendation and let you guys know how it turns out. Thanks for the quick reply. :good:
Alright I was able to flash back to stock 4.0.4 using your thread/guide. Will flash a custom kernel now.
Back to SHOstock again!
I had the same thing happen to me today.
I had to clear the cache on the phone and factory reset it after installing the 4.0.4 UCLL6 from creepyncrawly's sig.
It took 5 minutes or so after I did that of it sitting at the AT&T logo before the phone came up.
It sucked.

[Q] why my samsung wont turn on after update superuser ?

Hi, I danny, I have problem with samsung galaxy s2, after I update android to 4.1.2 jelly bean, problem that when update once with superuser in clockworkmod, my phone wont turn on, only out samsung galaxy s2 logo. please help me, thank you.
Boot into recovery, factory reset. No recovery ? Flash stock rom with Odin. How ? Thread stickied near the top of Q&A has the information you need.
DANNY_DANIEL said:
Hi, I danny, I have problem with samsung galaxy s2, after I update android to 4.1.2 jelly bean, problem that when update once with superuser in clockworkmod, my phone wont turn on, only out samsung galaxy s2 logo. please help me, thank you.
Click to expand...
Click to collapse
Which variant of S2 do you have? What did you flashed for superuser? You probably flashed the wrong file, flash stock again in odin or restore if you have a nandroid backup, then find whatever you need to flash properly, we can help you if you give us more information.
Dakura said:
Which variant of S2 do you have? What did you flashed for superuser? You probably flashed the wrong file, flash stock again in odin or restore if you have a nandroid backup, then find whatever you need to flash properly, we can help you if you give us more information.
Click to expand...
Click to collapse
before this I use android 4.1.2 jelly bean official, I change to BiftorRom V10 JB XWLSW no wipe, I777UCMD8_modem, and jeboo_kernel_i777_v2-2_CWM in sdcard. after that, I exchange to revolutionROm, I follow all in youtube : After all okay, superuser order me update in CWM, when I press "CWM" telephone started restart and attached in "Samsung Galaxy SII GT_i9100" I try kill power and switch on back, it same. Please help me,
SORRY FOR BAD ENGLISH
MistahBungle said:
Boot into recovery, factory reset. No recovery ? Flash stock rom with Odin. How ? Thread stickied near the top of Q&A has the information you need.
Click to expand...
Click to collapse
i try to open recovery to factory/delete all data but it won't open. just out image logo "Samsung Galaxy SII GT-i9100"
DANNY_DANIEL said:
before this I use android 4.1.2 jelly bean official, I change to BiftorRom V10 JB XWLSW no wipe, I777UCMD8_modem, and jeboo_kernel_i777_v2-2_CWM in sdcard. after that, I exchange to revolutionROm, I follow all in youtube : After all okay, superuser order me update in CWM, when I press "CWM" telephone started restart and attached in "Samsung Galaxy SII GT_i9100" I try kill power and switch on back, it same. Please help me,
SORRY FOR BAD ENGLISH
Click to expand...
Click to collapse
Can you go to recovery? (volume up+home+power) If you can, simply wipe data and cache, and see if it works out.
Dakura said:
Can you go to recovery? (volume up+home+power) If you can, simply wipe data and cache, and see if it works out.
Click to expand...
Click to collapse
i try to open recovery to factory/delete all data but it won't open. just out image logo "Samsung Galaxy SII GT-i9100" and stalk.
DANNY_DANIEL said:
i try to open recovery to factory/delete all data but it won't open. just out image logo "Samsung Galaxy SII GT-i9100" and stalk.
Click to expand...
Click to collapse
Can you go to download mode? (press down+ home+ power) when the phone opens, stop pressing the power button but keep pressing other buttons. If you can go to download mode, flash your stock firmware again via odin ( you can download your stock firmware from samfirmware.com) , if you get bootloop after that, go to recovery and delete data and cache.
Dakura said:
Can you go to download mode? (press down+ home+ power) when the phone opens, stop pressing the power button but keep pressing other buttons. If you can go to download mode, flash your stock firmware again via odin ( you can download your stock firmware from samfirmware.com) , if you get bootloop after that, go to recovery and delete data and cache.
Click to expand...
Click to collapse
yes can. give me 12 hours for try this. thanks for help! :good:
Dakura said:
Can you go to download mode? (press down+ home+ power) when the phone opens, stop pressing the power button but keep pressing other buttons. If you can go to download mode, flash your stock firmware again via odin ( you can download your stock firmware from samfirmware.com) , if you get bootloop after that, go to recovery and delete data and cache.
Click to expand...
Click to collapse
Hi Dakura, I try to include another android official 4.1.2 in ODIN. When i click start, it FAIL. I try again, but it same. And i try to use a new RECOVERY file, It same. FAIL. Please help me. thanks.
DANNY_DANIEL said:
Hi Dakura, I try to include another android official 4.1.2 in ODIN. When i click start, it FAIL. I try again, but it same. And i try to use a new RECOVERY file, It same. FAIL. Please help me. thanks.
Click to expand...
Click to collapse
Are u sure u are doing everthing correctly? You need to download stock from your region, check if you stock firmware is correct, you can search your development forums for stock firmware mirrors or you can download from samfirmware.com , you need to put it on PDA, and then just flash.
DANNY_DANIEL said:
before this I use android 4.1.2 jelly bean official, I change to BiftorRom V10 JB XWLSW no wipe, I777UCMD8_modem, and jeboo_kernel_i777_v2-2_CWM in sdcard. after that, I exchange to revolutionROm, I follow all in youtube : After all okay, superuser order me update in CWM, when I press "CWM" telephone started restart and attached in "Samsung Galaxy SII GT_i9100" I try kill power and switch on back, it same. Please help me,
SORRY FOR BAD ENGLISH
Click to expand...
Click to collapse
I Had this problem too at the past when update superSU.. If u face to update SuperSU again..Try update superSu with normal mode..
Sent from my GT-I9100 using Xparent Purple Tapatalk 2
dinoredfield said:
I Had this problem too at the past when update superSU.. If u face to update SuperSU again..Try update superSu with normal mode..
Sent from my GT-I9100 using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Before i update SuperSU, My WeChat Can't open moment, i know it problem in WeChat apps. Btw my SdCard not detect. And my gallery can't open and show the text "Not enough space. Delete unnecessary items such as ... pictures, videos..." that why i exchange to revolutionROm. It like Samsung note 3/Galaxy s4. Then SuperSU command update a SuperSU in CWM and i have a problem. -_- . now my phone back to normal, just gallery can't open. I remove the SdCard. it same.
As the message said, delete unnecessary items, if that doesn't work, format sd card (internal and external both) and if that doesn't work, use nuke script, re-install rom.

Categories

Resources