Glad to be a member of XDA-dev!
Hi guys, I am not sure if I am following the rule of the furom but I dont know what to post for the 10 post rule since " I AM REALLY A NOOB!"
I am new to the android and rooting world. I hope that the Admin and the Mods will be able to understand this post as to what I am getting through right now.
I have a problem with my Acer Liquid Mini E310. I hope that someone will be able to help me here! ( I am sure that someone should have the answer to this)
When a friend of mine introduced rooting to me, I was amaze on what it can change and what it can do to your android phone. I've read xda forum post on how I can root my Acer Liquid Mini E310 and I have also read about the danger it could cause to your device (brick). I did not really put in mind that I will be causing my phone to be bricked since I am sincerely and precisely following all the instructions in everypost that I have gone through. I have rooted my phone in a good way and it worked for 2 months of use, rooted.
There was a time that I've read about font changer on what it could do to customized your phone fonts. I did tried downloading GO Laucher and one of its feature is changing the fonts on the GO Launcher settings page. I was amaze by it and I got the idea of getting my rooted Acer Liquid Mini E310 to change its system fonts. I went to market and downloaded "FONT CHANGER by MARTIN". I applied the settings and the app requested for my phone to be rebooted.
When the phone went to boot up it stuck to the Acer logo with the 3 android icons on the screen. I tried hard resetting it by holding Power, Volume down and Camera button and let it vibrate 3 times. It did reset /data and /cache then reboot but when it boot up it will stay on the same screen with the Acer logo with the 3 androids icon.
I did tried to read some posts here and I got this post about Odin 3. This software needs a .PIT and another file that is needed to be input so that it will be able to download and fix the problem. I dont know which and where I can download those files.
I REALLY NEED YOUR HELP! I know that its a big mistake for me since I didnt really studied rooting before proceeding on rooting my phone but I hope you can help me out on this. I really dont have the financial capability to get a new phone right now. Please guys.
Any suggestions would do. Thanks in advance.
- judajammers
If you have still problem with your device than go to acer site and download gingerbread 2.3.5 version and try to install on your device but before you install on your device you have to swtich your phone to download mode ( Voluem down + Power on key) before do this thing you have to shutdown your phone.
Chiragsilver said:
If you have still problem with your device than go to acer site and download gingerbread 2.3.5 version and try to install on your device but before you install on your device you have to swtich your phone to download mode ( Voluem down + Power on key) before do this thing you have to shutdown your phone.
Click to expand...
Click to collapse
Thanks for the post sir. Is there any further steps that I need to do?
Related
Dear xda forums.
Unortunatedly, this is my first post and i will be asking for help rather than helping :/
So... my father came in a week ago with a chinese android phone that i cant tell what phone it is trying to replicate exactly.... thing is, no matter how much i look for this phone i cant find anything about it, i already searched a lot on how to fix this proble but to no avail...
I can give more details if you need them), but basically this is my problem:
I got a chinese phone that runs on 4.2.2, and after working a lot, i managed to install supersu via framaroot(superuser would not work properly).
Thing is, being the inpatient person i am, before backing up anything, or installing a recovery rom or any costum rom, i decided to check some apps that required root.
I downloaded the app anim mod *root* because i thought it was a good idea to change the animations of my phone
HERES THE PROBLEM i used this app and i could see how it was changing things in my system files, it then asked for a reboot, and now it wont get past the boot animation and it freeses right there, i can enter factory mode(which is in chinese and i did look up for a translation) and recovery mode:
In both modes i was able to reset the phone but the problem is still there, ive literally have been searching whole days now and i am quite frustrated.
My question: what should i do to fix this? i have root but no recovery rom , so is there a way i can install a costunm rom just to try?
If the case is that i changed a system file (animations) how can i change them through my pc? does a reset from the stock recovery reset the system files aswell?
I am new to this, but i am willing to learn and try everything that could fix this.
If anyone wants to help, you can ask me whatever you want, i can upload pictures if you want to help me identify it or the specs i managed to get from factory mode.
the phone says it is an alps model a76, but thi phone is nowhere to be found help me please
Hi
Hope you all are doing fine !
I am new to this forum and its my first post here !
I was thinking to create an account on this forum since a week, but today i had to as im in trouble
I hope i will get solution.
I have just purchased Samsung Galaxy S3 Clone (Mediatek 6575). Its Android 4.2 Jelly bean.
It was working perfectly fine only had issue that it's wifi was catching signals really weak. I mistakenly factory reset my phone which cause to no boot up animation. Its just blank when i turn on or off my phone. To fix that i rooted my phone as to get into root files i need to root it.
Since i rooted my phone the issue i am having is it says "System UI Stopped working" , "Touch wizard stopped working". Now what should i do, i am really worried.
I tried going into the CWM recovery but its not going, it was going in stock recovery before now its not even going in the stock recovery its just all blank.
Now what should i do, its okay if i don't get the bootup logo/shutdown logo but atleast i have to remove these errors.
I am not into these things much so i have no idea.
How can i unroot my phone ? Would it fix problem ?
Or what i should do to fix this issue.
My Phone hardware is Mediatek 6575 , android 4.2 jellybean.
When the error "System UI stopped workin" appears the background becomes black and the notification bar disappears.
Please help me what i should do
Thanks alot, i need urgent replies.
I hope my issue will be solved soon.
reply
Plz reply
need fix soo
Your gonna need to reflash your Rom from scratch. You will have a hard time finding it as clone devices don't use real Android versions or software.
Bat cave One
i replaced my systemUI.apk another system UI but i lost my apk file now i am getting blank screen .i have a swipe lock but it is not opening due to blank screen ,another complication it is my usb debugging is off .How can i open my launcher toget my phone back, please help me
Hi I have an Allwinner A10 clone (Kurio 7), it is designed for kids but otherwise a standard android tablet.
After hours of googling I rooted and installed CWM & Gapps (not included in the stock ROM). So far so good.
The stock ROM was causing issues with some apps, it needed to go.
I flashed CM10 and it worked but no touch screen. It needed a compatibility flash to make it work. You can guess what's coming. I picked the wrong one and now the device does the following:
Reboot loop
Black screen (backlight though)
PWR+Vol up no longer gets to recovery
Vibrates constantly between reboots (due to wrong patch I'm guessing)
ADB picks up the device for a split second between reboots but "adb reboot recovery" does nothing. Even when using wait command.
Tried "fastboot flash recovery cwm.img" after wait command, no luck.
Is there anything else I can try?
I fixed this.
I used the GoClever TAB A73 ROM and instructions in their support/update/download area.
Sorry I cannot post links as I am still a newbie.
Anyway flashing using Livesuit this fixed the problem.
Turzyx said:
I fixed this.
I used the GoClever TAB A73 ROM and instructions in their support/update/download area.
Sorry I cannot post links as I am still a newbie.
Anyway flashing using Livesuit this fixed the problem.
Click to expand...
Click to collapse
Hi, can you please share with me how you manage to unbrick your Kurio 7. I had just bricked mine trying to install CM10.
Thanks.
lamkc said:
Hi, can you please share with me how you manage to unbrick your Kurio 7. I had just bricked mine trying to install CM10.
Thanks.
Click to expand...
Click to collapse
I guess this is the site he is refering to:
http://www.goclever.com/uk/support,c3/software-update,a28.html?aic=5&aia=185&ail=10
The LiveSuit pack is there for download, as well as the roms.
But there are three different 4.0 roms to choose from, and also a couple of 2.3 roms. I dont know which one he did use.
Since your Kurio 7 is bricked anyway, I guess you can try one by one and see if any of them work.
Please tell which one, if you succeed.
Dear All,
I hope someone can help me get out of the situation.
I am using this FEITENG HTM H9001 6 Inches China Phone.
It came rooted by the vendor.
It is a good and nice phone. And I like it alot.
After I install a "font changing" apps,
The phone auto shut off and restart and it stuck at the HTM logo.
So sad Sad.
I know I need to reflash the firmware.
So I did some search on line...............
After finally managed to install the USB's driver which I was not able for quite long....
I follow the instruction on youtube from this site.
Down loaded the flast tool - SP Flash Tool v3.1332.0.sn187
Go to needrom to get a HTM H9001 firmware.
It should be there "right firmware". Someone there on the page where i got the firmware for H9001 said that its stable after he flash it. So proceeded to download it. Safely assume its the correct rom.
Using the flashtool, I followed the flashing steps exactly untill the green sign appeared. I was looking forward to see it start again after the problem mentioned above...........
After pulling out the cables from my PC, I press the power/start button of the phone to check if its ok....BUT It did started but it only shows "whitish color screen"
I can't even see the usual green colour HTM logo when the phone was switched on but I can hear sound of the phone starting... it stays at the whitish screen. And when I touch certain part of the screen the phone seem to response...just that I cannot view the desktop and the icon.. perhaps the video driver was corrupted in some way...or could it be the wrong rom
I proceeded re-flash it again........
same result - white screen.... phone still response to " power switch when press the LCD goes off. and some responsive sounds when the blank screen is touhed...
I am here in hope for some luck in finding ways to recover my phone back to normal...
It all started from installing a font changing apps that corrupted the firmware...than perhaps my action may have complicate the situation further....
Please. Any help would be great.
Thanks so much in advance.
How can I make good back my Feiteng HTM H9001
Or did I got the wrong ROM ?
It did not stae Feiteng just H9001 .
The rom I downloaded for my phone is here for my Feitend HTM H9001.
Is this the correct rom for my phone ?
Appreciate , really needs help to get out from this problem.
I love this phone. I want to make it good again Smile
I will try to upload some image to show its current stae.
many Thanks in advance.
Desmond
So desperate..I uses this MTK Droid tools.
I turn the phone on and it detected the details on my phone.....
Is there any way to use other tools to get my phone back to working like before the "font changing apps" time .... it was working great just before with no problem at all.............
MTK droid can detec the details of my phone...........
BUT i am lost - any way to use Droid tools to save the situation ?
I attached some picture to share what I meant...
Hope some nice great guys can shed some lights so i can try to move ahead..currently really lost... newbies to android phone....
Many Thanks
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Repair HTM H9001
moneycow said:
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Click to expand...
Click to collapse
Hello friend,
if you want to recover your H9001 look this link:
movilesdualsim com htm6582
on the site will explain the steps to solve your problem.
To me it happened to me same thing that has happened to you.
And now I enjoy my H9001 more than ever.
regards
Hello everyone. This is a long story, so thanks in advance to read it and try to help me.
I've got a Trekastor surftab Ventos 8.0 this one --> http://www.trekstor.de/detalles-de-surftabs/product/272.html?file=tl_files/generatedPdf/272-de.pdf
model st80208-2 . I'm not sure if it is the 8 or 16 GB. And I don't know how to check it because the tablet is bricked.
How did I brick the tab?
This is a good question. I had lost the charger and I tried with another one with a higher voltage. This ruined the batery. And when I found the charger the tablet show a strange behaviour. It was trying to start but reboot before to finish. I was able to finish a full boot but the batery only works for a few minutes. After solve the batery problem, now I can start the tablet without problem about the voltage but, it seems like all this failed attemps to boot have made some damage somewhere.
What I have now?
The tablet start. It show's the trekstor logo. After that it show's the android logo, and that's all. It stuck's looping in the android logo.
What I have tried?
Everything.
1.- Custom recovery. http://forum.xda-developers.com/showthread.php?t=2039964 or this http://forum.xda-developers.com/showthread.php?t=1995984
This method not working in my tablet even when it was not bricked. (I tried it, when I was trying to get root access a month ago).
Power + Volumen (-) gets nothing at all. It's start normally. (and loop in my currently situation)
Power + Volumen (+) gets this screen http://cdn.howtogeek.com/wp-content/uploads/2012/12/android-recovery-mode.jpg and anything happens no matter what button I'm pressing even with the custom recovery in the sdcard.
2.- I tried to flash the tablet, but I didn't find information about how to do it and trust me, I have searched a lot.
I triend with this software: "Amlogic Image Burning Tool v.1.6.2.2" and this firmware http://forum.xda-developers.com/showthread.php?t=2039964 . But I get the error "find no upgrade config, please load it manually". I'm pretty sure I doing something wrong, but I have no experience with this software or flashing in general.
That's all for now I'm tired of reading this forum and this other one in german. (thanks to google translator) http://www.android-hilfe.de/surftab-ventos-8-0-forum/ and I did not find anything useful for me
You people are my only hope. (Any Star wars fan in the room?:laugh:
So any help would be wonderful, thanks in advance and sorry for my mistakes, english is no my mother language.