Okay I'm very proficient with Android, my brother however isn't.
We live about 1,000kms away.
And I've been emailing him with detailed (n00b) guide on how to save his stuff, install a good kernel, and a good ROM on his i9100 (Vodafone Australia branded).
I also gave him lots of info/help with AOKP and Launchers and what-not.
When I was on a short holiday, he told me about some issues (stability and etc).
I was able to upgrade to a newer kernel and newer rom and fixed the issues except for one.
The STUPID microUSB port is on the fritz.
It shows charging when it isn't. It does charge. It does show the correct %.
But connecting the phone to PC, it doesn't recognize it.
After so many attempts, and troubles, he wants TouchWizz back but with ICS.
So how do I install ICS on it?
Where can I download stock kernel and stock ROM?
Flash with Odin (preferd) or Kies (shrug)?
I need some "clear" instructions, so I can dumb it down and explain to him.
He should've gotten an iPhone, seriously, but what can you do?
Thanks for all honest attempts!
(PS Why isn't this issue found in Search or Google. I thought it would be common)
Kangal said:
Okay I'm very proficient with Android, my brother however isn't.
We live about 1,000kms away.
And I've been emailing him with detailed (n00b) guide on how to save his stuff, install a good kernel, and a good ROM on his i9100 (Vodafone Australia branded).
I also gave him lots of info/help with AOKP and Launchers and what-not.
When I was on a short holiday, he told me about some issues (stability and etc).
I was able to upgrade to a newer kernel and newer rom and fixed the issues except for one.
The STUPID microUSB port is on the fritz.
It shows charging when it isn't. It does charge. It does show the correct %.
But connecting the phone to PC, it doesn't recognize it.
After so many attempts, and troubles, he wants TouchWizz back but with ICS.
So how do I install ICS on it?
Where can I download stock kernel and stock ROM?
Flash with Odin (preferd) or Kies (shrug)?
I need some "clear" instructions, so I can dumb it down and explain to him.
He should've gotten an iPhone, seriously, but what can you do?
Thanks for all honest attempts!
(PS Why isn't this issue found in Search or Google. I thought it would be common)
Click to expand...
Click to collapse
Do you have access to CWM recovery? If yes then you can just download a much stable, less bloated custom stock ROM for him and flash it via CWM recovery
Swyped from my Galaxy SII
Jokesy said:
Do you have access to CWM recovery? If yes then you can just download a much stable, less bloated custom stock ROM for him and flash it via CWM recovery
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Yeah he's got it (custom recovery, kernel, rom, scheduler, governor, voltage setup etc etc).
He was on the best custom kernel and AOKP ROM at the time (1.5 months ago). I don't think its the custom rom, I think its his handset... he must've dropped it a lot of times.
And the microUSB issue is possibly hardware related.
He's just "had enough" of a custom rom, he wants it dumbed down.
Like I said, he shoulda got an iPhone, he's just not into spending the effort to reap Android's benefits. He "100%" wants TouchJizz again.
So where can I get him to download the files, and what's the best (dumbest) way to get him to do it. I can't go there just to solve his problems.
Kangal said:
Yeah he's got it (custom recovery, kernel, rom, scheduler, governor, voltage setup etc etc).
He was on the best custom kernel and AOKP ROM at the time (1.5 months ago). I don't think its the custom rom, I think its his handset... he must've dropped it a lot of times.
And the microUSB issue is possibly hardware related.
He's just "had enough" of a custom rom, he wants it dumbed down.
Like I said, he shoulda got an iPhone, he's just not into spending the effort to reap Android's benefits. He "100%" wants TouchJizz again.
So where can I get him to download the files, and what's the best (dumbest) way to get him to do it. I can't go there just to solve his problems.
Click to expand...
Click to collapse
Download from here: wanamlite.com/forums/showthread.php?tid=444
Note:
- stock theme means the default Samsung look (i believe he's going to like this one)
- blue theme means blue theme
Swyped from my Galaxy SII
If I were you Id get the phone back to pure stock and tell him to do the donkey work and learn.Any hardware issues then send the phone back for warranty(if its got any).
Anything other than that,then you are just giving yourself more work/grief for the future.
Sent from my GT-I9100 using xda premium
I don't think he'd be happy with it, but I'll be sure to recommend it to him.
Gosh, its so frustrating not having it in front of me.
theunderling said:
If I were you Id get the phone back to pure stock and tell him to do the donkey work and learn.Any hardware issues then send the phone back for warranty(if its got any).
Anything other than that,then you are just giving yourself more work/grief for the future.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I agree with you 100%
Swyped from my Galaxy SII
theunderling said:
If I were you Id get the phone back to pure stock and tell him to do the donkey work and learn.Any hardware issues then send the phone back for warranty(if its got any).
Anything other than that,then you are just giving yourself more work/grief for the future.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Okay.
I told him to back up his EFS and do a nandroid before he install'd the custom ROM.
Turns out he can't find the files (or never bothered).
Otherwise it would've been simple (nandroid restore, install Kies, apply update).
Anyways, what's the easiest way for him to fall back from an AOSP ROM to an Official Stock Samsung TouchWizz 4.0.4 Firmware?
No modifications whatsoever, he can do the rest himself I've pretty much had it
Kangal said:
Okay.
I told him to back up his EFS and do a nandroid before he install'd the custom ROM.
Turns out he can't find the files (or never bothered).
Otherwise it would've been simple (nandroid restore, install Kies, apply update).
Anyways, what's the easiest way for him to fall back from an AOSP ROM to an Official Stock Samsung TouchWizz 4.0.4 Firmware?
No modifications whatsoever, he can do the rest himself I've pretty much had it
Click to expand...
Click to collapse
i believe it's via CWM recovery. I don't really think that kind of person can handle Odin!
Swyped from my Galaxy SII
Jokesy said:
i believe it's via CWM recovery. I don't really think that kind of person can handle Odin!
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Okay.
Do you where is a safe link for him to download the firmware.
(sorry I'm just full of rage at his idiocracy)
Kangal said:
Okay.
Do you where is a safe link for him to download the firmware.
(sorry I'm just full of rage at his idiocracy)
Click to expand...
Click to collapse
What about the link i posted the other time, or do you prefer unmodified stock firmware in CWM zip format?
Swyped from my Galaxy SII
Theres cwm like jokesy said and theres mobile odin.Using them eliminates pc/usb problems.
I would have thought he wouldnt want carrier branding....who does.
Sent from my GT-I9100 using xda premium
Jokesy said:
What about the link i posted the other time, or do you prefer unmodified stock firmware in CWM zip format?
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Yeah, unmodified Stock Firmware.
Let him scrabble to root it and restore the Titanium Backup I made for him.
I doubt he'll get another Android phone, even the iPhone may be too much for him.
Kangal said:
Yeah, unmodified Stock Firmware.
Let him scrabble to root it and restore the Titanium Backup I made for him.
I doubt he'll get another Android phone, even the iPhone may be too much for him.
Click to expand...
Click to collapse
Advise him not to ROOT the 4.0.4 firmware I'm going to post soon. He can potentially damage his phone if he does without knowing some necessary things like the super brick bug.
Swyped from my Galaxy SII
Not posting it?
Kangal said:
Not posting it?
Click to expand...
Click to collapse
the stock Roms available in CWM zip format are already pre-rooted but unmodified with stock kernel and recovery
Xwlpt ICS 4.0.4 firmware for UK: wanamlite.com/forums/showthread.php?tid=3393
He should do full wipe before flashing.
Swyped from my Galaxy SII
Just a quick update. He's flashed that ROM you recommended (which is basically stock rom and stock kernel, with just r00t etc).
And what I told him has resulted:
1) Phone is ever-so slower in transitioning between Apps
2) Phone uses more power (I'd say a difference of about 1hour per day)
3) GPS a little slower to lock
4) Camera seems to have improved (no surprises)
5) The "bug" of his Music App not finding his music in the SD has gone
6) The microUSB still wont interact with his PC
7) The microUSB still shows "charging" constantly.
Diagnosis:
- Busted microUSB slot, incompetent user.
(Thanks for all suggestions, Thread can be closed)
Related
Hi I've bought myself the SGS2 (non-G version).
now, to root, do I use the method here? http://forum.xda-developers.com/showthread.php?t=1103399
and let's say i have rooted it using CF-root 5.2, do I just pick a ROM and start flashing them? Or do I proceed to flash a Custom Kernel first before the ROM?
Anyway, I noticed that there are 2 sections for the SGS2G and the SGS2 (non-G). Which ROMS do I select from and are the ROMS variant dependent? means if I have the non-G version, I cannot install a ROM from the SGS2 Original section? A little help please! So sorry for being a noob.
Yes follow those rooting instructions, after the phone is rooted download a rom and copy it to your phone then flash it via cmw or manually via recovery mode, reboot while holding power, home and volume up.
Personally I recommend bezke UltraIcs, using it without issue
http://forum.xda-developers.com/showthread.php?t=1393569
Sent from my GT-I9100 using Tapatalk
adrianj said:
Hi I've bought myself the SGS2 (non-G version).
now, to root, do I use the method here? http://forum.xda-developers.com/showthread.php?t=1103399
Click to expand...
Click to collapse
1st thing you do: read, read, read.
You can use whatever root method you feel comfortable with. I've used CF-Root, Odia's insecure kernels, SuperOneClick, and flashing Siyah kernel. They all work fine.
adrianj said:
and let's say i have rooted it using CF-root 5.2, do I just pick a ROM and start flashing them? Or do I proceed to flash a Custom Kernel first before the ROM?
Click to expand...
Click to collapse
Most ROMs come with their own kernels, so if you flash a custom kernel, then a ROM, then the kernel that came with the ROM will overwrite whatever custom kernel you flashed first.
adrianj said:
Anyway, I noticed that there are 2 sections for the SGS2G and the SGS2 (non-G). Which ROMS do I select from and are the ROMS variant dependent? means if I have the non-G version, I cannot install a ROM from the SGS2 Original section? A little help please! So sorry for being a noob.
Click to expand...
Click to collapse
What 2 sections do you mean? The Galaxy S II Original Android Development, and the Galaxy S II Android Development forums?
It's important to note that these are not G and non-G. Original means developed from the ground up. (think CyanogenMod) The non-original generally means derivative from another ROM - usually stock.
I9100G ROMs are scattered throughout the I9100 forums, because there is currently no separate forum for the I9100G. The post title for these ROMs should always note that they are for the I9100G instead of the I9100 though. As long as you follow my suggestion for 1st of all above, you should be fine.
If you have the i9100g choose the roms that clearly indicates i9100G only in title, otherwise it should work just fine for i9100. Roms in original development indicate roms built completely by the developer hence the original. The Android development roms are roms that could be based off of someone else' rom or similar. You can flash roms from either section.
Just make sure to properly flash them and never forget to make a backup.
Edit: ctomgee answered.
Kaze105 said:
If you have the i9100g choose the roms that clearly indicates i9100G only in title, otherwise it should work just fine for i9100. Roms in original development indicate roms built completely by the developer hence the original. The Android development roms are roms that could be based off of someone else' rom or similar. You can flash roms from either section.
Just make sure to properly flash them and never forget to make a backup.
Edit: ctomgee answered.
Click to expand...
Click to collapse
Beat you by 2 min. It was a long post though, so it took me a while.
simbesh said:
Yes follow those rooting instructions, after the phone is rooted download a rom and copy it to your phone then flash it via cmw or manually via recovery mode, reboot while holding power, home and volume up.
Personally I recommend bezke UltraIcs, using it without issue
http://forum.xda-developers.com/showthread.php?t=1393569
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I'm downloading as we speak! Seems good! Love the ICS theme though. Are u using a custom kernel?
ctomgee said:
1st thing you do: read, read, read.
You can use whatever root method you feel comfortable with. I've used CF-Root, Odia's insecure kernels, SuperOneClick, and flashing Siyah kernel. They all work fine.
Most ROMs come with their own kernels, so if you flash a custom kernel, then a ROM, then the kernel that came with the ROM will overwrite whatever custom kernel you flashed first.
What 2 sections do you mean? The Galaxy S II Original Android Development, and the Galaxy S II Android Development forums?
It's important to note that these are not G and non-G. Original means developed from the ground up. (think CyanogenMod) The non-original generally means derivative from another ROM - usually stock.
I9100G ROMs are scattered throughout the I9100 forums, because there is currently no separate forum for the I9100G. The post title for these ROMs should always note that they are for the I9100G instead of the I9100 though. As long as you follow my suggestion for 1st of all above, you should be fine.
Click to expand...
Click to collapse
Thank you so much for the prompt reply! Finally I've got the answers to my questions! Btw, what ROM are you currently using? What I'm particularly concerned about is the custom Kernel that can help me optimize my battery.
adrianj said:
I'm downloading as we speak! Seems good! Love the ICS theme though. Are u using a custom kernel?
Click to expand...
Click to collapse
Please be aware that though simbesh said he is using it without issues, ICS is NOT officially released. Some users have issues with ICS ROMs that others use with absolutely no problems.
As Kaze105 said, ALWAYS make sure you make a backup before you flash. (in case you need to go back)
adrianj said:
I'm downloading as we speak! Seems good! Love the ICS theme though. Are u using a custom kernel?
Click to expand...
Click to collapse
Nice, yea the ics theme is very slick. It was updated this morning to v2.1 with the latest i9100 kernal XXLPB
Sent from my GT-I9100 using Tapatalk
simbesh said:
Nice, yea the ics theme is very slick. It was updated this morning to v2.1 with the latest i9100 kernal XXLPB
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
nice! this will be my first ever custom rom! this rom is for the i9100 (non-G) right? cuz it didn't say 'G' in the title. just making sure.
ctomgee said:
As Kaze105 said, ALWAYS make sure you make a backup before you flash. (in case you need to go back)
Click to expand...
Click to collapse
This this this
Yes standard i9100, it will be very clear if its i9100G or i9100 at&t etc if its a special rom
Sent from my GT-I9100 using Tapatalk
ctomgee said:
Please be aware that though simbesh said he is using it without issues, ICS is NOT officially released. Some users have issues with ICS ROMs that others use with absolutely no problems.
As Kaze105 said, ALWAYS make sure you make a backup before you flash. (in case you need to go back)
Click to expand...
Click to collapse
and by making a backup, i use the CWM nandroid backup? to restore from back up is through the same CWM?
adrianj said:
Thank you so much for the prompt reply! Finally I've got the answers to my questions! Btw, what ROM are you currently using? What I'm particularly concerned about is the custom Kernel that can help me optimize my battery.
Click to expand...
Click to collapse
I am on stock XXKI3, which is 2.3.5, with Siyah Kernel 2.6.4. There are newer firmwares, and newer versions of Siyah, but I feel no need to upgrade as of now. I've modded my firmware myself pretty heavily, and prefer to do all the tweaks myself. Helps me understand how my phone works better.
If you're interested in a kernel that will help with battery, look at SpeedMod, then maybe Siyah. SpeedMod users swear by their battery life. I use Siyah because it has more features, and has more customization. But it's a preference thing.
adrianj said:
and by making a backup, i use the CWM nandroid backup? to restore from back up is through the same CWM?
Click to expand...
Click to collapse
Correct
Sent from my GT-I9100 using Tapatalk
adrianj said:
and by making a backup, i use the CWM nandroid backup? to restore from back up is through the same CWM?
Click to expand...
Click to collapse
Yes, should be. Though be careful - flashing some kernels automatically installs certain versions of CWM. If your backup is made in a different version of CWM than what you are trying to restore from, it may not work.
ctomgee said:
I am on stock XXKI3, which is 2.3.5, with Siyah Kernel 2.6.4. There are newer firmwares, and newer versions of Siyah, but I feel no need to upgrade as of now. I've modded my firmware myself pretty heavily, and prefer to do all the tweaks myself. Helps me understand how my phone works better.
If you're interested in a kernel that will help with battery, look at SpeedMod, then maybe Siyah. SpeedMod users swear by their battery life. I use Siyah because it has more features, and has more customization. But it's a preference thing.
Click to expand...
Click to collapse
seems pretty interesting the way you mod your phone! and by modding the phone yourself, you mean you take apart tweaks from different ROMs and install them in your phone? I hope im not imposing but do you mind sharing with me the tweaks that you have done to your stock rom? i might do the same if the ICS rom doesn't work the way i want it to.
adrianj said:
seems pretty interesting the way you mod your phone! and by modding the phone yourself, you mean you take apart tweaks from different ROMs and install them in your phone? I hope im not imposing but do you mind sharing with me the tweaks that you have done to your stock rom? i might do the same if the ICS rom doesn't work the way i want it to.
Click to expand...
Click to collapse
The more involved mods I have are:
Phone.apk tweaked to have Noise Reduction off by default in phone calls
Battery icon with % in status bar
CRT-off animation on screen off
Rotation animation in UI
The first three involved decompiling the files involved, editing the files, and recompiling. The rotation animation involved downloading some files that another kind soul posted that were from the Galaxy Note and installing them on my phone in place of the files that were already there. All require root. You can find all of these in the forums with a search...
Wow. I just hit 500 posts. Crazy.
ctomgee said:
The more involved mods I have are:
Phone.apk tweaked to have Noise Reduction off by default in phone calls
Battery icon with % in status bar
CRT-off animation on screen off
Rotation animation in UI
The first three involved decompiling the files involved, editing the files, and recompiling. The rotation animation involved downloading some files that another kind soul posted that were from the Galaxy Note and installing them on my phone in place of the files that were already there. All require root. You can find all of these in the forums with a search...
Wow. I just hit 500 posts. Crazy.
Click to expand...
Click to collapse
congrats on your posts! anyway, those mods are build dependent? or universal?
adrianj said:
congrats on your posts! anyway, those mods are build dependent? or universal?
Click to expand...
Click to collapse
The first three I think are build dependent. Some people have tried different versions on other firmwares and had some success, but others, not so much.
The rotation animation one, I'm not sure about.
I couldn't find an answer on the threads. I rooted my at&t last night w entropy512s one click kernel and root. Well I'm new to the phone tech so it took me a while. I now cannot use any of the market Hotspot apps to run my tablet off my s2 wifi. I could before the root and from what I was told it should be easier to do this after rooting. Am I missing something? Is there a special way I have to do it now? I'm so confused.
Sent from a still, small voice with help from my Galaxy s2.
I'm not familiar with those applications. I don't know any reason they would not work. And it's not clear from your post what exactly the problem is. You mean you can't install them, or that they do not produce a wifi signal even though installed?
Anyway, almost all custom roms include portable wi-fi hotspot, as well as usb tethering and sometimes bluetooth tethering. Since you have rooted, why don't you go ahead and pick a custom rom and put that on. Problem solved.
There is a good guide linked in my signature.
Yeah, once you have a custom rom, just use the built-in tethering. Works great for tablets.
Yea I can install them, I've tried a few of them and none put out a wifi signal. I don't know what rom I should flash yet. Since I did the entropy512s one click root+ kernel I understand that the kernel is gingerbread, does that mean I need a gingerbread rom? I was hoping for the latest, greatest build. Any guidance is GREATLY appreciated as it took me hour just to root. Lol
Sent from a still, small voice with help from my Galaxy s2.
nednerbish said:
Yea I can install them, I've tried a few of them and none put out a wifi signal. I don't know what rom I should flash yet. Since I did the entropy512s one click root+ kernel I understand that the kernel is gingerbread, does that mean I need a gingerbread rom? I was hoping for the latest, greatest build. Any guidance is GREATLY appreciated as it took me hour just to root. Lol
Sent from a still, small voice with help from my Galaxy s2.
Click to expand...
Click to collapse
Since you used Entropy512's package to root, you have a stock kernel. In order to install custom firmware, you need to first install a custom kernel that contains ClockworkMod Recovery onto your phone. That kernel must be Gingerbread. However, once you have the kernel and CWM installed, you can then flash any firmware you choose, Gingerbread, ICS or JB.
The guide which is the first link in my signature contains all the info you need.
Fantastic. Thank you so much for your time. I will try first chance I can.
Sent from a still, small voice with help from my Galaxy s2.
I will give you two pieces of advice:
1: Follow the instructions given to you by Creepy (and any instructions in the OP of ROMS) to the T.
2: Read then read some more. When you're done with that, read it all over again. Afterwards, follow step 2 again. This goes for searching about any issue you may come across.
Have fun, this device is really amazing once you figure out more about it
Clay
Team Pirate
Sent from my Buttery Smooth PINK SGH-i777
I thank you. I will. I'm so confused about this stuff but it seems the more I read I am really UNDERSTANDING what it means. But it takes about 10 read throughs.
Sent from a still, small voice with help from my Galaxy s2.
Ok I was told to get entropys dd kernel since it had cwm with it. I guess thats the next step correct?
Sent from a still, small voice with help from my Galaxy s2.
Use creepy's guide Ned! You need to figure out what your next step is.
Im on the mobile tapatalk (on vacation), So i cant use my computer to reaserch the xda site easily. Im trying to learn as much as possibe before i get home and actually do it.
Sent from a still, small voice with help from my Galaxy s2.
Good plan. When you get the cwm kernel, do a nandroid backup then pick any rom you like... (cm10 nightly just came out, if you like jellybean)
AOKP by Task650 is another JB alternative.
Which is better you ask? Gonna have to try them both! They both offer stability and great user experience for most who try them. Maybe you're a GB or an ICS kinda guy though!
Clay
Team Pirate
Sent from my Buttery Smooth PINK SGH-i777
It really doesn't matter much which kernel you choose for the next step, because it's only on your phone for a short time. Assuming you rooted with the Gingerbread stock plus root package, then you need a custom Gingerbread kernel which has ClockworkMod Recovery. I believe the links in my guide for the kernels are still working links.
The root I did said it was root + kernel. I take it the one with the entropy512 one click root+ kernel doesnt include the cwm. Im sorry im jist trying to understand the whole process not just do it. Alot of what i read doesnt click. Loke when I rooted it took me 6+ hours because I didnt know you want to save the file not open it when downldng it. also I read the deleting the tethermanager2.apk will open wifi/tether. True?
Sent from a still, small voice with help from my Galaxy s2.
Forget i asked. I re read your comment. Ok its a stock kernel. So it wouldnt. I understand. A stock kernel probably would make it easier to return to stock. right?
Sent from a still, small voice with help from my Galaxy s2.
nednerbish said:
Forget i asked. I re read your comment. Ok its a stock kernel. So it wouldnt. I understand. A stock kernel probably would make it easier to return to stock. right?
Sent from a still, small voice with help from my Galaxy s2.
Click to expand...
Click to collapse
Essentially, yes, but if you're going for custom ROMs, that's not what you want. There are easy ways of getting back to stock if all else fails.
You gotta know what you want first, before you move forward. I know you want tethering to work, and people here have recommended moving to a custom ROM because tethering does not seem to work for you on rooted, stock ROM and stock kernel. So do you want a custom ROM instead (you'll lose some of your current data via that route)? Or do you not care about ROMs and you just want wifi tethering to work now that you're rooted?
Assuming you want just the latter of the two options, I would recommend that you first try a custom kernel (this is different from a custom ROM, but note most custom ROMs include a custom kernel upon install). You mentioned Entropy's Daily Driver Gingerbread kernel, which is a great one. I'd recommend installing it and seeing if that fixes your wifi tethering problem. To install, use Mobile Odin lite version; you can find that apk in Creepy's guide. Download and save the zip from Entropy's DD thread, then extract the zImage file from it (make sure to use the name "zImage", no file extension, important) and move that to your phone via USB mounting. After that, in Mobile Odin lite navigate to the zImage file and flash it; viola, you now have Entropy's custom Gingerbread kernel and stock GB ROM. All custom kernels include ClockworkMod (no other way to get it), so you have that too.
If the custom kernel alone does not fix your wifi tethering problem, then maybe it's time to move to a custom ROM. With CWM, you can flash anything (ROMs, kernels, what have you) much more easily, but we'll get to that after you get the kernel, which is part of the process anyway.
These instructions are all repeated in paragraph 3a of Creepy's guide, and more information is written there, so I would recommend reading it thoroughly so you do understand. I know it's frustrating at first, but you'll get it, and you seem like the type to eventually get it right and understand what you're doing.
THANK YOU!!! I will try that tonight. That was very helpful info. So I CAN do this right from phone the? I saw there were some Apps that can do stuff like that but wasn't sure if they worked. I think I saw one linked to the superuser app. Ill keep you updated
Sent from a still, small voice with help from my Galaxy s2.
I also want a new rom also. I'm just trying to get there. LOL
Sent from a still, small voice with help from my Galaxy s2.
[Chinese accent] Have patience, Grasshopper.
hi guys,
i have a samsung galaxy s2 (GT-i9100 - NFC), which i got from orange end of 2011. I the in jan 2012 got help from this forum to root my phone and change the rom from the original to:-
Rom & Build No: VillianROM 3.0
And' ver: 2.3.5
Baseband: i9100XXki1
Kernel: 2.6.35.11-ninphetamine-2.0.5+ninpo @ titan #20
Although the phone works okay, i'm beginning to notice a lot of slowdowns and regular reboots, so i want to go back to whatever latest google android OS the S2 can handle (rooted). I've forgotten what to do and would be most grateful if someone could please help me with the following:-
1. Whats the best software/method to backup everything?
2. What is the latest rom (original, but should not have a provider's bloatware) i can use on the S2?
3. Once backed up, how do i change from VillianRom to the latest/best OS currently available?
4. How can i root the original rom?
Thanks once again
Check
www.galaxys2root.com
I think it ll help you and save you time
Sent from my GT-N7100 using Tapatalk 2
Thanks oxi - there are quite a few roms on there and i simply want the latest official one which i can root. From your experience which is currently the most popular rom?
wowandroid said:
Thanks oxi - there are quite a few roms on there and i simply want the latest official one which i can root. From your experience which is currently the most popular rom?
Click to expand...
Click to collapse
For official stock rom, check
www.sammobile.com
And search latest stock rom for your region.
If you like custom rom, then there are so many roms on xda. I like omega and alliance roms. Choice varies from person to person
Sent from my GT-N7100 using Tapatalk 2
wowandroid said:
1. Whats the best software/method to backup everything?
2. What is the latest rom (original, but should not have a provider's bloatware) i can use on the S2?
3. Once backed up, how do i change from VillianRom to the latest/best OS currently available?
4. How can i root the original rom?
Thanks once again
Click to expand...
Click to collapse
1. Depends. You can do a backup in CWM to image your device or you can use Titanium Backup Pro to just backup your apps/appdata and restore to new rom.
2. http://www.sammobile.com/firmware/ < Check your device/model here.
3. Well just so you're clear, There is no "best" its subjective. Also "latest" depends on what type of rom you want to flash like Sammy/AOSP/AOKP/CM/MIUI etc. To flash latest samsung do it via ODIN, to flash any other do it via CWM. All info you need is already on forum.
4. By flashing custom kernel via ODIN.
All your questions have already been answered countless times.
Thanks very much guys. I simply want a fast lean rom as some seem to be slow running.
Doesn't get better than this.
sendign the phone for warranty?
you will need to flash back the original rom and unroot your phone.
if they found your phone is rooted the warranty void, experience it before so be aware of this.
Let me thank you guys for advicing me. I am most grateful. I read your posts a bit late and in the meantime, I think i have bricked my phone as i've flashed Samsung's original FW (I9100PBVLP8_I9100PORALP8_ORA) from sammobile.com. I used Odin v3 and successfully flashed the phone, but it's simply stuck on the boot logo. I have even done the following:-
I've managed to wipe the cache partition, but the recovery menu has No advanced options. It says:-
ANDROID SYSTEM RECOVERY <3a>
reboot system now
apply update from ext' storage
wipe data/factory reset
wipe cache partition
apply update from cache
test redband fota[FS]
But i still cannot get it to boot. I have also tried to use an old nandroid.md5 backup i made, but odin reports the file as invalid.
I'm desperate guys, please could someone help me.
Download Mode and re flash.
Are you sure you are flashing the right ROM right? Check under the battery to see the Device Model.
If it's i9100, then make sure you are downloading a i9100 ROM.
Thanks very much for your advice gastonw - i have managed to fix the problem now by going into system recovery and doing a factory reset, so thank you.
Although everything seems to be working fine, i would have preferred a more newer 4.2 jelly bean rather than 4.0.3. Oh well beggars can't be choosers and all that, lol! I guess i'll have to re-root it again.
gastonw mate ur a star! I've installed the latest JB rom u posted earlier and i'm very happy with it.
Now before i damage it beyond repair, how do i root it safely?
wowandroid said:
gastonw mate ur a star! I've installed the latest JB rom u posted earlier and i'm very happy with it.
Now before i damage it beyond repair, how do i root it safely?
Click to expand...
Click to collapse
Hi You could try this method http://forum.xda-developers.com/showthread.php?t=1501719 its quite safe so ether should work or wont, if don't no harm done as it doesn't need a insecure kernel.
I'm quite new myself @ this so plz use caution when trying it out.
Peace
wowandroid said:
gastonw mate ur a star! I've installed the latest JB rom u posted earlier and i'm very happy with it.
Now before i damage it beyond repair, how do i root it safely?
Click to expand...
Click to collapse
Good to know man, enjoy it
About root, I've seen a couple of methods laying around the threads, I'm sure they're safe.
I still think that ExynosAbuse app is the fastest way to Root now (one-click).
Here's a vid. I never tried it tho.
Thanks very much for the links AnubuRe and Gastonw.
Gastonw mate, i have been playing with the rom you posted a link to. Don't get me wrong, it's great and very fast, but the downside is that it doesn't have a huge number of options to tweak etc. Now someone mentioned a rom called Neatrom, but i'm wondering what you can recommend? I don't want a bloated rom...i want a fast rom, but with some options to allow me more greater control over the phone.
Also, i know this is a bit off-topic, but can you recommend me a widget app, where i can quickly dial phone numbers i.e. by touching a person's photo?
I still run a stock ice cream, I'm officially going to root it and put a custom fw on it. It would be a miracle at this point if they updated it.
What is the closest to the s3 rom? I'm guessing its shostock3? I really want a stock rom, with all the samsung apps. I know people ask all the time what the best rom is etc etc, but is my assumption correct here? i777 here.
my only fear is that shostock will be worse on battery life than an official one, but at the same time, that could be a false notion with me.
Thank you for any input.
justanother1020 said:
I still run a stock ice cream, I'm officially going to root it and put a custom fw on it. It would be a miracle at this point if they updated it.
What is the closest to the s3 rom? I'm guessing its shostock3? I really want a stock rom, with all the samsung apps. I know people ask all the time what the best rom is etc etc, but is my assumption correct here? i777 here.
my only fear is that shostock will be worse on battery life than an official one, but at the same time, that could be a false notion with me.
Thank you for any input.
Click to expand...
Click to collapse
With any custom ROM you should get better battery life as opposed to the stock ICS ROM, as there are kernel bugs that drains battery at a faster than normal pace.
There is also an issue with the stock kernel that can permanently brick your phone (do NOT perform a factory reset or wipe of any sort unless/until you have replaced that kernel!!)
SHOstock3 can get awesome battery life.
so is shostock3 the only rom that gives me jelly bean + touchwiz 5 ? and the samsung apps ? I saw the music player is the same as the s3 etc??
Thank you
justanother1020 said:
so is shostock3 the only rom that gives me jelly bean + touchwiz 5 ? and the samsung apps ? I saw the music player is the same as the s3 etc??
Thank you
Click to expand...
Click to collapse
Look in the development section for others but shostock3 is one of the most solid ones. Flash it and try it for yourself.
Sent from my CLEAN Note ll
so is there any other rom that give you a more stock s3 experience other than shostock?
Thank you
justanother1020 said:
so is there any other rom that give you a more stock s3 experience other than shostock?
Thank you
Click to expand...
Click to collapse
Here's my suggestion: make a nandroid backup, flash SHOstock3 and see whether you like it or not.
I installed Fromaroot and rooted the phone. I'm trying to get CWM on there now.
I was trying to do it without odin and without using a computer much. Did I mess up the process doing the fromaroot, it did succeed. All I have now is the android recovery(which i'm guessing isn't much help?).
I'm trying to install shostock, but it looks like i already need a kernel that has CWM already on the phone before I install that? I don't want stuff that is already iterated to me repeated, and have the thread locked.
But can I use mobile odin pro to install a kernel with CWM? or should I really be using the computer right now to do all of this?
Thank you
justanother1020 said:
I installed Fromaroot and rooted the phone. I'm trying to get CWM on there now.
I was trying to do it without odin and without using a computer much. Did I mess up the process doing the fromaroot, it did succeed. All I have now is the android recovery(which i'm guessing isn't much help?).
I'm trying to install shostock, but it looks like i already need a kernel that has CWM already on the phone before I install that? I don't want stuff that is already iterated to me repeated, and have the thread locked.
But can I use mobile odin pro to install a kernel with CWM? or should I really be using the computer right now to do all of this?
Thank you
Click to expand...
Click to collapse
Assuming the root process worked correctly, then you *can* use Mobile Odin (pro or lite) to install a custom kernel containing ClockworkMod Recovery. For more detailed information, please see the guides linked in my signature.
even though it says I already need a kernel that has CWM to install shostock on the official page?
sorta came off as most people will have already been flashed etc.
the last thing i want to do is brick my phone on the first attempt. Also what kernel should I flash, there is so much outdated info out there. I dont see anyone on here mention fromaroot but it worked perfectly, maybe it's a bit of a newer tool.
justanother1020 said:
even though it says I already need a kernel that has CWM to install shostock on the official page?
sorta came off as most people will have already been flashed etc.
the last thing i want to do is brick my phone on the first attempt. Also what kernel should I flash, there is so much outdated info out there. I dont see anyone on here mention fromaroot but it worked perfectly, maybe it's a bit of a newer tool.
Click to expand...
Click to collapse
Read the 1st link from creepyncrawly's signature to get started.
Simple rule to follow. Look what version of Android your phone is running now, and then read the related posts for flashing kernel, ROM, CWM, etc. That's how I did it. This phone is almost 2 years old and of course outdated info is floating around.
For me, it took less than an hour to root/flash the phone, but days to read through all related posts.
justanother1020 said:
even though it says I already need a kernel that has CWM to install shostock on the official page?
Click to expand...
Click to collapse
I'm not sure what you're getting at here.
You started out with stock 4.0.3 (or 4.0.4.) Your stock kernel contains stock 3e recovery, which you can not use to flash custom firmware. So, to put custom firmware on the phone, you need to first flash a kernel containing CWM Recovery. (There is no stand alone recovery on this phone. The recovery is built right into the kernel.) You can do that by several methods. Using Mobile Odin is the quickest and easiest. It's almost fool proof.
And yes, the phone is starting to show it's age, and the guides are getting a little out dated. But the information is still good. What is important is understanding the process. You (and everyone) should understand exactly what you are doing before you modify your phone. Once you understand the process, you are much less likely to make a paper weight.
For a custom kernel, use one of the ones linked in the OP of the thread for 4.0.4 ICS, UCLL6 plus root which is also linked in my signature.
sorta came off as most people will have already been flashed etc.
the last thing i want to do is brick my phone on the first attempt. Also what kernel should I flash, there is so much outdated info out there. I dont see anyone on here mention fromaroot but it worked perfectly, maybe it's a bit of a newer tool.
Click to expand...
Click to collapse
Just to recap, to go from stock to custom firmware
1. root
2. install a custom kernel containing CWM recovery. It should be a recovery that works with your current system.
3. use CWM recovery to flash the firmware of your choice.
4. profit
Thanks guys,
I've actually flashed a few phones for my friends, read up and 20 mins later i was off an on.
This was a bit more of a trouble for me though. Tons of ways to do it, many versions of this phone, half the time i would be reading and be like, damn this is not for the i777 can't take any chances.
i'm going to put that kernel on there , and then flash shostock3 , seems to be the closest thing to an s3 like experience on this phone.
I was / still am, heavily worried about battery life, something keeps telling me this is like going to cut my battery in half, i blame the experience on the t mobile g1, where i put all these roms on my friends phone and it just sucked away the battery.
Hopefully shostock3 does a good job though! ICS just isn't cutting it anymore
justanother1020 said:
...I was / still am, heavily worried about battery life, something keeps telling me this is like going to cut my battery in half, i blame the experience on the t mobile g1, where i put all these roms on my friends phone and it just sucked away the battery.
Hopefully shostock3 does a good job though! ICS just isn't cutting it anymore
Click to expand...
Click to collapse
Not to worry! See attachment.
Admittedly, this was very light usage. But it gives you an idea what is possible.
Oh, and this is the stock battery that came with the phone in Oct. 2011. No telling how many charge cycles on it. At least 4-500.
got shostock3 on it, runs beautifully
battery life so far is just as good or even better than stock, lots of bloatware gone.
Thank you to everyone.
Fromaroot > 4.0.4 custom kernel (mobile odin) > shostock did the trick, couldn't be easier, if you ever really motivated and didn't mind waiting a bit, i guess you could do that whole process with just the phone.
only thing i used the computer for was transferring files.
and now 4 days later the official one comes out!
Everyone lost hope, even me!
I'm tempted to try it out, but at the same time, i'm quite happy with shostock3
justanother1020 said:
I'm tempted to try it out, but at the same time, i'm quite happy with shostock3
Click to expand...
Click to collapse
mr-cook has a modified stock version. It's stock system plus root and busybox, and the jebo kernel. So if you wanted to try it out, you could make a nandroid backup of SHOstock3, try out the cooked rom, and if you don't like it, go back real easy.
Stock s3 experience
justanother1020 said:
so is there any other rom that give you a more stock s3 experience other than shostock?
Thank you
Click to expand...
Click to collapse
Try the Alliance Rom, it has the Samsung app store and you register with Samsung when you first boot up.
I recently picked up a GP 4.2. I immediately got it rooted so now I'm running a 2.3.6 stock rom with root. What's the next step in terms of getting a recovery installed and maybe moving up to an ICS or JB rom? I've kind of poked around a bit but it's some what confusing with all the other types of GPs in the same area. Does anybody have a recovery and rom they'd recommend? Is using rom manager to push CWM feasible?
I would recommend the ChaOS ROM/Kernel which includes CWM. It is one of the few available ROMs for this device right now but offers a lot of great features. You can also install an S3 or Jelly Bean theme with the ChaOS ROM. Here's the link to the ROM: http://forum.xda-developers.com/showthread.php?t=2279806. I do not believe using ROM manager to push CWM is feasible on this device. Also, CM7 will most likely make it on to this device very soon. I would recommend watching for that in the near future. I know it can be a hassle trying to weed through the Galaxy Player forums to find 4.2 information but it's all we've got. Hope this helps and welcome to the SGP 4.2 community!
MetaMav said:
I would recommend the ChaOS ROM/Kernel which includes CWM. It is one of the few available ROMs for this device right now but offers a lot of great features. You can also install an S3 or Jelly Bean theme with the ChaOS ROM. Here's the link to the ROM: http://forum.xda-developers.com/showthread.php?t=2279806. I do not believe using ROM manager to push CWM is feasible on this device. Also, CM7 will most likely make it on to this device very soon. I would recommend watching for that in the near future. I know it can be a hassle trying to weed through the Galaxy Player forums to find 4.2 information but it's all we've got. Hope this helps and welcome to the SGP 4.2 community!
Click to expand...
Click to collapse
Thank you for the info Meta. I'm somewhere around the mid-high mid level with flashing and rooting but slogging through trying to find the right info for a GP 4.2 was getting a bit hectic. I think part of it was the way some people abbreviate the model compared to others. I just wanted to make sure I didn't brick the device.
I got it mainly for a perm, in-car music and GPS/navigation provider instead of always looking to my phone to do it. One thing I noticed about the rom, it mentions installing it via CWM. If I don't have CWM yet, can this rom get pushed by odin or do I have to get CWM first and then flash the rom?
NapalmDawn said:
Thank you for the info Meta. I'm somewhere around the mid-high mid level with flashing and rooting but slogging through trying to find the right info for a GP 4.2 was getting a bit hectic. I think part of it was the way some people abbreviate the model compared to others. I just wanted to make sure I didn't brick the device.
I got it mainly for a perm, in-car music and GPS/navigation provider instead of always looking to my phone to do it. One thing I noticed about the rom, it mentions installing it via CWM. If I don't have CWM yet, can this rom get pushed by odin or do I have to get CWM first and then flash the rom?
Click to expand...
Click to collapse
you should flash CWM via odin first and then flash the ROM via CWM
Would the instructions here be the right thing to do?
http://www.youtube.com/watch?v=-MbHDbjph8A
MetaMav said:
I would recommend the ChaOS ROM/Kernel which includes CWM. It is one of the few available ROMs for this device right now but offers a lot of great features. You can also install an S3 or Jelly Bean theme with the ChaOS ROM. Here's the link to the ROM: http://forum.xda-developers.com/showthread.php?t=2279806. I do not believe using ROM manager to push CWM is feasible on this device. Also, CM7 will most likely make it on to this device very soon. I would recommend watching for that in the near future. I know it can be a hassle trying to weed through the Galaxy Player forums to find 4.2 information but it's all we've got. Hope this helps and welcome to the SGP 4.2 community!
Click to expand...
Click to collapse
Do you know if CM will come to the 3.6 as well? And from what I understand, to get CWM on the 3.6 you have to flash a custom kernel?
NapalmDawn said:
Would the instructions here be the right thing to do?
http://www.youtube.com/watch?v=-MbHDbjph8A
Click to expand...
Click to collapse
Yes. Those instructions are correct. However, you do not need to run the adb dev tool like the person does in the beginning of video in order to boot into download mode. You can just hold the power, home, and down-volume button to boot the phone into download mode before using Odin. Zaclimon's CWM kernel can be found here (along with the wifi fix): http://forum.xda-developers.com/showthread.php?t=2198444 and installed with the instructions in the youtube video.
Xenphor said:
Do you know if CM will come to the 3.6 as well? And from what I understand, to get CWM on the 3.6 you have to flash a custom kernel?
Click to expand...
Click to collapse
From what I have read I know that SerkTheTurk is currently compiling CM for the 4.2. I would imagine either him or some other 3.6 dev will take up the task of CM for your device. And, the answer to your second question is yes, you do have to flash a custom kernel similar to how the 4.2 requires a custom kernel.
Hope that helps.
MetaMav said:
Yes. Those instructions are correct. However, you do not need to run the adb dev tool like the person does in the beginning of video in order to boot into download mode. You can just hold the power, home, and down-volume button to boot the phone into download mode before using Odin. Zaclimon's CWM kernel can be found here (along with the wifi fix): http://forum.xda-developers.com/showthread.php?t=2198444 and installed with the instructions in the youtube video.
From what I have read I know that SerkTheTurk is currently compiling CM for the 4.2. I would imagine either him or some other 3.6 dev will take up the task of CM for your device. And, the answer to your second question is yes, you do have to flash a custom kernel similar to how the 4.2 requires a custom kernel.
Hope that helps.
Click to expand...
Click to collapse
Ok thanks. I also have a question regarding flashing kernels. In the linux world (and other os world), randomly changing your kernel is a big no no that would lead to major compatibility issues. I don't understand how people can mix and match kernels, roms, firmware, bootloaders, recoveries and everything else? There won't be conflicts?
Regarding the kernel available for the 3.6: what do I do if I encounter stability issues with it and, say, the upcoming CM7? I wouldn't be able to go back to my original kernel because I didn't have CWM to back it up in the first place. Won't I be stuck with a potentially faulty kernel?
Xenphor said:
Ok thanks. I also have a question regarding flashing kernels. In the linux world (and other os world), randomly changing your kernel is a big no no that would lead to major compatibility issues. I don't understand how people can mix and match kernels, roms, firmware, bootloaders, recoveries and everything else? There won't be conflicts?
Regarding the kernel available for the 3.6: what do I do if I encounter stability issues with it and, say, the upcoming CM7? I wouldn't be able to go back to my original kernel because I didn't have CWM to back it up in the first place. Won't I be stuck with a potentially faulty kernel?
Click to expand...
Click to collapse
In changing kernels in the android world, you have mixed results. There are times a kernel can cause some issues but for the most part (we're talking like 98%), if an XDA dev posts a kernel and lets you know you can use it, you can trust it. These devs no matter the device spend painstaking hours ironing things out. Also, many of them have a select group of people testing the kernel for faults and issues. In a very active community, if a well known dev posts a kernel, you can trust it. HOWEVER...no matter what we think or believe or what we're told, every device is a unique and beautiful snowflake. Back up back up back up BACK UP BACK UP BACK UP your stuff. If you want to be super ULTRA safe, take the back up and download it to your PC or somewhere safe.
NapalmDawn said:
In changing kernels in the android world, you have mixed results. There are times a kernel can cause some issues but for the most part (we're talking like 98%), if an XDA dev posts a kernel and lets you know you can use it, you can trust it. These devs no matter the device spend painstaking hours ironing things out. Also, many of them have a select group of people testing the kernel for faults and issues. In a very active community, if a well known dev posts a kernel, you can trust it. HOWEVER...no matter what we think or believe or what we're told, every device is a unique and beautiful snowflake. Back up back up back up BACK UP BACK UP BACK UP your stuff. If you want to be super ULTRA safe, take the back up and download it to your PC or somewhere safe.
Click to expand...
Click to collapse
Well that's my dilemma because in order to backup my kernel I first need to flash the custom kernel to get CWM. What do I do?
Xenphor said:
Well that's my dilemma because in order to backup my kernel I first need to flash the custom kernel to get CWM. What do I do?
Click to expand...
Click to collapse
Just flash the cwm kernel because its basically the stock kernel but with cwm, and it shouldnt brick but if it does you can flash the stock kernel back again
Sent from my YP-GI1 using Tapatalk 2
SerkTheTurk said:
Just flash the cwm kernel because its basically the stock kernel but with cwm, and it shouldnt brick but if it does you can flash the stock kernel back again
Sent from my YP-GI1 using Tapatalk 2
Click to expand...
Click to collapse
Where could I find a stock kernel?
Xenphor said:
Where could I find a stock kernel?
Click to expand...
Click to collapse
US version: http://forum.xda-developers.com/showthread.php?t=1885374
International: http://forum.xda-developers.com/showthread.php?t=1884071
Sent from my YP-GI1 using Tapatalk 2
SerkTheTurk said:
US version: http://forum.xda-developers.com/showthread.php?t=1885374
International: http://forum.xda-developers.com/showthread.php?t=1884071
Sent from my YP-GI1 using Tapatalk 2
Click to expand...
Click to collapse
Ok thank you. However, will this work with YP-GS1?
But about kernels, on the webpage where I downloaded the stock rooted rom http://tau.shadowchild.nl/attn1/?p=166 it says specifically that the Wifi module in system and kernel must MATCH. This is what I'm talking about in regards to kernel compatibility with roms. How do I know if a kernel I'm downloading will have changes applied to it that will work with another rom like with this stock rom/kernel?
Well in order-I used odin to flash CWM. Once it rebooted, I saw the Galaxy SII boot anim. Used Rom Manager to have it boot to CWM. From there I flashed wifi fix, the rom and then the mod pack. My build number is gingerbread-ueld3. From what I can tell, I think I'm all done. At first I was like hrmmmmm. Doesn't look much different. When I hit the toggle bar though, I could tell it had changed. The process was all very simple after I got headed in the right direction with CWM. That was my only confusing start point for this.
Edit-my bad. The rom didn't take on the first flash. I could tell by the build number. Reflashing the rom and the s3 addons. Hrmmm. Might be boot looping. It's going through the comet and coming up to the white samsung, vibrates a few times after a bit and goes back to the comet with no sound.
NapalmDawn said:
Well in order-I used odin to flash CWM. Once it rebooted, I saw the Galaxy SII boot anim. Used Rom Manager to have it boot to CWM. From there I flashed wifi fix, the rom and then the mod pack. My build number is gingerbread-ueld3. From what I can tell, I think I'm all done. At first I was like hrmmmmm. Doesn't look much different. When I hit the toggle bar though, I could tell it had changed. The process was all very simple after I got headed in the right direction with CWM. That was my only confusing start point for this.
Edit-my bad. The rom didn't take on the first flash. I could tell by the build number. Reflashing the rom and the s3 addons. Hrmmm. Might be boot looping. It's going through the comet and coming up to the white samsung, vibrates a few times after a bit and goes back to the comet with no sound.
Click to expand...
Click to collapse
Well I had to flash this kernel http://forum.xda-developers.com/showthread.php?t=2198234 to get CWM on mine. I haven't actually flashed anything with CWM because there doesn't seem to be any good roms for the 3.6 unless CM7 comes out sometime. I used Odin to flash a stock rom from here http://tau.shadowchild.nl/attn1/?p=166
NapalmDawn said:
Well in order-I used odin to flash CWM. Once it rebooted, I saw the Galaxy SII boot anim. Used Rom Manager to have it boot to CWM. From there I flashed wifi fix, the rom and then the mod pack. My build number is gingerbread-ueld3. From what I can tell, I think I'm all done. At first I was like hrmmmmm. Doesn't look much different. When I hit the toggle bar though, I could tell it had changed. The process was all very simple after I got headed in the right direction with CWM. That was my only confusing start point for this.
Edit-my bad. The rom didn't take on the first flash. I could tell by the build number. Reflashing the rom and the s3 addons. Hrmmm. Might be boot looping. It's going through the comet and coming up to the white samsung, vibrates a few times after a bit and goes back to the comet with no sound.
Click to expand...
Click to collapse
Poop. I think I bootloped the sucker. I can use Odin to reflash the stock, rooted rom just like I did when I got it first rooted right? Do we have another rom for the 4.2 I could try flashing? Not sure why it has bootlooped. I even went back into CWM, did a factory reset, flashed only the rom (no addons) and same thing. Possible bad download? It is flashing from the internal SD as my CWM is not seeing my external SD.
NapalmDawn said:
Poop. I think I bootloped the sucker. I can use Odin to reflash the stock, rooted rom just like I did when I got it first rooted right? Do we have another rom for the 4.2 I could try flashing? Not sure why it has bootlooped. I even went back into CWM, did a factory reset, flashed only the rom (no addons) and same thing. Possible bad download? It is flashing from the internal SD as my CWM is not seeing my external SD.
Click to expand...
Click to collapse
I have been meaning to post this on the dev thread for awhile. I thought this problem might only be for certain people but I think it applies to US and maybe non-EU devices. I believe that the ChaOS ROM will bootloop on US (YP-GI1/XAA) devices if you do not install ChaOS's Enhanced Stock ROM (http://forum.xda-developers.com/showthread.php?t=2279450) for whatever reason. I spent days trying to install his ROM and bootlooping.
The way I successfully installed (if I remember correctly):
-Do a factory reset of rooted stock ROM
-Boot to CWM (meaning you have already flashed the custom kernel) and install ChaOS's Enhanced Stock (put all install files on internal SD)
-Boot to CWM, wipe davlick cache under "advanced", wipe cache partition, and install the ChaOS ROM
-Wait a little while and your device should boot up properly
I hope this works for you. If it doesn't let me know and I can help you further. If this does work for you too then I will post this on the ROM's thread for other users.
Xenphor said:
Well that's my dilemma because in order to backup my kernel I first need to flash the custom kernel to get CWM. What do I do?
Click to expand...
Click to collapse
SerkTheTurk said it very well, you do not need to worry, but if you also want to do a backup before you install the custom kernel you could use the adb tools on the computer to backup the device. I'm sure you could learn how to do that with a quick Google search.
MetaMav said:
I have been meaning to post this on the dev thread for awhile. I thought this problem might only be for certain people but I think it applies to US and maybe non-EU devices. I believe that the ChaOS ROM will bootloop on US (YP-GI1/XAA) devices if you do not install ChaOS's Enhanced Stock ROM (http://forum.xda-developers.com/showthread.php?t=2279450) for whatever reason. I spent days trying to install his ROM and bootlooping.
The way I successfully installed (if I remember correctly):
-Do a factory reset of rooted stock ROM
-Boot to CWM (meaning you have already flashed the custom kernel) and install ChaOS's Enhanced Stock (put all install files on internal SD)
-Boot to CWM, wipe davlick cache under "advanced", wipe cache partition, and install the ChaOS ROM
-Wait a little while and your device should boot up properly
I hope this works for you. If it doesn't let me know and I can help you further. If this does work for you too then I will post this on the ROM's thread for other users.
SerkTheTurk said it very well, you do not need to worry, but if you also want to do a backup before you install the custom kernel you could use the adb tools on the computer to backup the device. I'm sure you could learn how to do that with a quick Google search.
Click to expand...
Click to collapse
ell there's not really much point in backing up the kernel when I've already downloaded it on my computer.
I've since flashed KingOS rom and don't really notice any differences at besides a few color changes... what's all the hype about?
Xenphor said:
ell there's not really much point in backing up the kernel when I've already downloaded it on my computer.
I've since flashed KingOS rom and don't really notice any differences at besides a few color changes... what's all the hype about?
Click to expand...
Click to collapse
Xen-it seems GPlayer development is still fairly newish. the work you see from devs now are all ground work. For the 4.2 and 3.6, they seem a little less dev populated than the 4 and 5. People will build upon the work of early devs and eventually get kernels that can OC and maybe ICS and JB roms. At this stage, we likely won't see anything like ZOMG earth shattering until people spend time with the devices. Seems Serk is on his way to doing the best he can for 4.2 but I am not sure who is tackling 3.6
It's weird how roms for devices go. I learned this when I had a tbolt and shockingly saw a FUNCTIONAL JB rom for my old Eris while the tbolt was still hanging back in ginger land with not even a really good ICS rom let alone JB. I asked the Tbolt community-why? How is it the dinosaur Eris has JB and not us? It all depends on what the devs can do with the sources provided. Sometimes certain hardware points are sticky. you can have beautiful JB rom for a device that can't talk to the camera if the hardware source isn't made available (reference the HP TP for many years)
For now, flash what you're comfortable with and and learn what you do and don't like. Also learn if you want to play things safe and not experiment or take on potentially beta builds. For the tbolt, tackling an ICS rom was too dicey so I never did. On my new Rezound, I eat up JB roms as they are in much better shape