Hi,
I looked on forum for some summary what is general use of SD-ext partition.
So far I found some explanations and some solutions for CM ROMs.
So, if I uderstand correctly, I can use sd-ext
- either as seamless extension of internal partitions (/data, /system, /cache), for more storage
- and/or for installing apps on SD card, that work when SD card is connected to PC ass mass storage
Is it right?
I am on AOKP ROM, I tried to use it for moving apps with Link2SD and Android Assistent, but they tried to move apps to sdcard.
So, what is correct use of sd-ext and how to make it with AOKP? Mainly I want to extend internal storage (384MB)
I think you need to have a ext3 partition in the SD...
try this method...
MrTapa said:
Ok so I am gonna make an easy guide. But befor i start i will say the requirements
Requirements
1.Rooted
2.Busybox installed(v19.4 reccomended)
4.Card reader
So here we are.
1.Download MiniTool Partition
2.Remove the sd-card from phone and put it in a card reader and plug in pc.
4.Select only important files like Pictures, Music , Titanium and clockworkmod backups and all that important stuff for you
5.Copy them to a folder in computer.
6.Install MiniToolPartition and open it.
7.You will see your hard drives and your sd card.
8. Right click on sd card and click delete. Then again right click and Create.
9.Select "File System:" FAT when you have 2GB or smaller card.
Select "File System:" FAT32 when you have 4GB or greater card.
10.Dont select the whole volume. Select for example if you have 4GB card select 3GB if you want your sd-ext to be 1GB
11.When you are done.Again right click on the sd card and create ext2 or ext3 partition.Then select the full volume allwoed.
12.Make sure that this volume is enough for all apps on your phone.
13.Whn you are done click on the apply button on the top left corner. Wait for it to finish. When you are done. Copy teh prevously backed up data to the card.
14.Put it on the phone and on the market download Link2SD
15.Run the app and it will ask for root.Then select your tipe of partition. tehn reboot.
16.After reboot go to the app and you can mult iselect your apps with the options menu. Then in actions.Click Create link. Then ok.
17.You are done. Now you have a cleaner sd and initial storage
FAQ:
Q:What is sd-ext partition.
A: Its a tipe of partiton than linux supports so Android can use it as an initial memory.
Q:Why i dont see more space when i go to Apps in phones settings
A:The phone cant display sd-ext partiton. you can view it via Link2SD.(Otions>Storage info)
Alternetive version of discribing:http://forum.xda-developers.com/showthread.php?t=1338708
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1750888
thanks!
I used MiniTool Partition Wizard but Neo couldn't find it.
Luckily I found this http://www.butonic.de/2012/03/14/partitioning-the-sd-card-for-app2ext-with-adb-shell/ and was able to fdisk my sdcard from putty connected to sshdroid. Now SD is correctly formatted and Link2SD created mount script.
I can't tell if it works or no. From what I expect, there should be more MB when I look at Settings -> Storage, because Link2SD extends my internal storage... but there is still the same ~420MB.
Can it be that Link2SD silently moves new apps to /sd-ext, but internal storage is still the same?
DarshanaXN said:
I think you need to have a ext3 partition in the SD...
try this method...
http://forum.xda-developers.com/showthread.php?t=1750888
Click to expand...
Click to collapse
PetrGasparik said:
thanks!
I can't tell if it works or no. From what I expect, there should be more MB when I look at Settings -> Storage, because Link2SD extends my internal storage... but there is still the same ~420MB.
Can it be that Link2SD silently moves new apps to /sd-ext, but internal storage is still the same?
Click to expand...
Click to collapse
I think you missed this line in my post.
Q:Why i dont see more space when i go to Apps
in phones settings
A:The phone cant display sd-ext partiton. you
can view it via Link2SD.(Otions>Storage info)
although phone settings doesn't display about sd-ext you may see that amount of free storage increases as you create links with link2sd. I've attached two screenshots showing one before linking asphalt and anti terror shooter to sd-ext and after linking.
I had the same problem with minitool. then I used CWM to partition the sd.
u need to format ur SD to ext2 and you need link2sd app
indycar said:
u need to format ur SD to ext2 and you need link2sd app
Click to expand...
Click to collapse
It depends on the kernel which file format it supports.
The FAQs from link2sd says that fat 32 is supported by every Android / kernel for SD ext partition.
This is my still unused SD ext fat 32 partition.
So if you are not sure fat 32 should always do the work. By the way mini partition tool works great.
Send from my Neo V with JJHybrid 3.3b and Night Elf 1.4 using Tapatalk 2
use ext 2
ext3 and 4 didnt work on my neo
Hi,
I used Link2SD for some time. I had some troubles with ROM - random reboots, YT not working etc
I stopped using Link2SD, because I tried to eliminate everything "unnatural".
At the end, I changed ROM from AOKP to Paranoid and it solved all these troubles (there are some new ones )
Now, then I installed Link2SD and try to create mount script, Link2SD fails with "Mounting script cannot be created"
what do you suggest? reformat card partition? I would like to re-link apps that are there.
DarshanaXN said:
I think you missed this line in my post.
Q:Why i dont see more space when i go to Apps
in phones settings
A:The phone cant display sd-ext partiton. you
can view it via Link2SD.(Otions>Storage info)
although phone settings doesn't display about sd-ext you may see that amount of free storage increases as you create links with link2sd. I've attached two screenshots showing one before linking asphalt and anti terror shooter to sd-ext and after linking.
I had the same problem with minitool. then I used CWM to partition the sd.
Click to expand...
Click to collapse
Yeah, you're right. It is still a little of mystery for me, but hey, I learn to use it
Anyway, Minitool IS great, but when I formatted a card with it, phone couldn't read it. So I had to use ssh to phone.
Related
Sorted it out the hard way - repartitioned with FAT and lost all my apps. Installed them quickly enough with Applanet App Market.
Theshawty said:
Hello XDA. A few months ago I partitioned my 2GB SD-card to use with a custom made 2.1 ROM I used to have and I have not changed this partitioning ever since, I've been using it with MiniCM and it works alright.
My question is: Could I or could I not partition it back to FAT so I don't have any ext without problems? Or do I need to reinstall MiniCM if I installed it with an ext partition?
Click to expand...
Click to collapse
One thing you need to check is if you have chosen 'internal memory' as the place to download applications that you may have downloaded/installed after installing CM1.In that case,choose the 'move to phone' option so that you don't have any apps stored on your ext partition.As long as you have stored apps either in the phone or external which is the FAT partition,there will be no problem at all in getting rid of the partition.Personally,I have never liked any of these ext partitions because I think they slow down the apps stored on them!
...do press the thanks button if this helps...........
Please clearly state which ROM are you going to flash, and the current partition details, partition(s) and size, filesystem ;-)
what is the ext2/ext3 partitions being used for ? are they only for setup new roms or for use while running the device?
i havent noticed any change with or without ext3 partition beside the low space left on the 2gb memory card...
eladmagen said:
what is the ext2/ext3 partitions being used for ? are they only for setup new roms or for use while running the device?
i havent noticed any change with or without ext3 partition beside the low space left on the 2gb memory card...
Click to expand...
Click to collapse
ext partitions are required to install apps2sd or link2sd so that you can store downloaded applications there instead of clogging your phone memory.These are not required if your OS is Froyo and higher since there is a native apps2sd which helps you move applications to the main FAT portion off the sd card.
-----------press the thanks button whenever you find any post useful........
Has anyone got this working? I used to have Link2SD in 2.1 but now the ext partition is the only partition recognized by GB and not my main partition. I can access my main partition from USB connect, but not from within the phone. Anyone has the same issue?
You can natively move apps to the SD on GB in Options>Applications>Manage applications. Choose an app that supports it and the option to move to sd will be there. No partition needed.
Thx, i will just fix up my SD card into a single partition again then
Does this also mean that I don't need the app Apps2SD anymore?
With App2SD you can quickly indicate which apps can be moved to SD. So I still have it there. Furthermore, App2SD also quickly clean your cache.
Link2SD gave the option of moving ANY app to the ext2 partition. The native gingerbread app2sd doesn't support moving all apps to the SD card.
Any way of making link2sd work on GB 2.3.3?
can anyone confirm what's the current sdcard partition layout. also which partition is detected in phone.
i think i have an idea which might help up getting this to work.
anantshri said:
can anyone confirm what's the current sdcard partition layout. also which partition is detected in phone.
i think i have an idea which might help up getting this to work.
Click to expand...
Click to collapse
@Anant: My SD is setup as per the guidelines described here:
http://forum.xda-developers.com/showpost.php?p=10711328&postcount=1
I have a 8GB card and I have allocated 7.05 GB of FAT32 memory to the Data partition, and have allocated 0.5GB to the secondary partition. This partition was also setup as FAT32 since i had issues with EXT2.
*Edit: After the 2.3.3 update, the X10 now detects only the 2nd partition (480MB) instead of the data partition (7GB) - but when I plug into a PC, the data partition gets mounted correctly.
Hope that helped.
That is not good, it means that you cannot transfer data or programs between your PC and the 7GB partition... is there a way to fix this?
When you plug into pc, your data-partition mounts correctly, so you can copy your data to your pc as a backup.
I recommend using a adapter to connect the sd-card to your pc, formatting both partitions, and then put it back. I did it that way, be it that I removed my second partition and went back to one partition only, 8 Gb, and all works fine now.
I don't intend to use Link2SD anymore, because in 2.3.3 the system can apply data2sd itself, I learned, with or without Apps2SD.
Good luck, greetz,
kwarkje
From my observation, the 2.3.3 android system moves the appdata to the sdcard only in certain large apps (apps >7mb in size?) which is good if you have are dealing with huge apks like AngryBirds, but not too handy if you have a huge number of small apps all ~3MB in size.
BTW the native app2sd isn't compatible with all apps.
Use "Move2SD Enabler" from Market to allow moving any app to SD.
https://market.android.com/details?id=com.leinardi.setinstalllocation&hl=en
This didnt work with my 32GB SD card... it is now a single 32GB FAT32 partition. What type of format should I use? FAT? EXT2?
kwarkje said:
When you plug into pc, your data-partition mounts correctly, so you can copy your data to your pc as a backup.
I recommend using a adapter to connect the sd-card to your pc, formatting both partitions, and then put it back. I did it that way, be it that I removed my second partition and went back to one partition only, 8 Gb, and all works fine now.
I don't intend to use Link2SD anymore, because in 2.3.3 the system can apply data2sd itself, I learned, with or without Apps2SD.
Good luck, greetz,
kwarkje
Click to expand...
Click to collapse
@doomed151:
Thats what I was looking for! Good find!
This app has its own hitch though: the move2sd enabler needs lots of caution...some apps aren't supported, and moving them to the SD causes them to crash. There is no way of knowing which apps can be moved and which ones can't. I happened to move GT Racing HD to the SD and it stopped working. Had to reinstall!
anantshri said:
can anyone confirm what's the current sdcard partition layout. also which partition is detected in phone.
i think i have an idea which might help up getting this to work.
Click to expand...
Click to collapse
@Anatshri Any luck on this? I would prefer to use link2sd instead of the native move2sd in GB.
I tried a 16gb & a 4gb sd card but couldn't get it to work. I've also tried ext2, ext3 & ext4 as the 2nd partition but I don't think the stock kernel supports any of them. The sd becomes unreadable after a reboot but if I connect directly to the pc I can see both partitions.
If I make both fat32 partitions only the 2nd partition gets mounted. Do you think this is kernel related as well or can we modify the mounting scripts to correct this?
I am suffering from bad health conditions right now so can't work much however all I can see right now is if this is the case you can do two things
1) create a script that mounts partition 1 at /data/sd-ext coz link2 sd needs mounted partition at this location. I suppose init.d script could help us. However
2) the problem would be that recovery will detect only partiton one
Sent from my X10i using XDA App
anantshri said:
I am suffering from bad health conditions right now so can't work much however all I can see right now is if this is the case you can do two things
1) create a script that mounts partition 1 at /data/sd-ext coz link2 sd needs mounted partition at this location. I suppose init.d script could help us. However
2) the problem would be that recovery will detect only partiton one
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I'm sorry to hear about your health, hopefully it's nothing serious and you get well soon. Thanks for the suggestion, I'll give this a try when I get a chance.
Any solution on this?
I move from 2.2 to 2.3.4 and link2sd don't work anymore cannot mount the 2nd fat32 partition.
App2SD sucks because doesnt allow some apps to get moved.
Thanks
Lockon Stratos said:
I'm sorry to hear about your health, hopefully it's nothing serious and you get well soon. Thanks for the suggestion, I'll give this a try when I get a chance.
Click to expand...
Click to collapse
Thanks for the wishes.
I have extended weekend this time will try to give my old card a twist and see if i can get link2sd work again on my handset.
bbsrailfan said:
Link2SD gave the option of moving ANY app to the ext2 partition. The native gingerbread app2sd doesn't support moving all apps to the SD card.
Any way of making link2sd work on GB 2.3.3?
Click to expand...
Click to collapse
I agree with you and hope that we will have this possibility, I really miss link2sd, the best app ever to move apps to sd.
Hello all. I am new to the forums and to Android, so bear with me.
I have been searching around for the past few days for a way to solve the issue that I am having and have not been able to find anything that works for me. So here it is:
I have an LG Optimus L5 II (LG-E450B) running stock Android 4.1.2 (non-rooted) Kernel Version 3.4.0. My carrier is Virgin Mobile (Canada). I recently realized that the stock 2GB of internal memory is not nearly enough for me, so I went out and bought a 16GB Sandisk microSD card. I put music on it, set photos to autosave on it, etc. which all worked great. However, I have been unable to get some apps to move over correctly.
I realize that some apps can't really get moved (at least without rooting, etc). The app I am specifically trying to work with is iBird pro. It's App Info appears as such:
Total: 641 MB
App: 12.68 MB
USB storage app: 628 MB
Data: 4.00 KB
SD Card: 0.00B
The "Move to SD Card" option is available, but when I do it all that it does is drop the App to 3.51MB and up the USB storage app to 637MB. All of which stays on the internal memory. Obviously it is only moving 9MB or so of App to the virtual SD internal memory (which I believe is what shows up in my files manager as /storage/sdcard0, so it doesn't actually move it to the SD card (though a few other apps have sucessfully been moved).
I have tried using App2SD, but it says that the program is not supported by my device (and the iBird Pro shows up as "Phone Only" anyway).
I have tried the ADB hack trick set-install-location 2 and reinstalled the app and still nothing, it just saved on the internal memory.
Finally, when I open the app, it also downloads another ~600MB of database data (bird songs, pictures, etc), which also saves on the internal memory. Or at least tries to but the memory gets full and it stops the download.
Anyone have any ideas for me? I know a lot of people ask this question, but none of the other solutions I came across seemed to help me. I would really appreciate it! I would prefer not to root my phone, by the way. Unless of course someone can make me an incredibly convincing argument.
Cheers!
This is how android's built-in app2sd works.
I don't think you can do anything w/o root.
I suggest rooting, make a second partition to your SD card (2-4 GB) and use link2sd.
Sent from my GT-I5500 [CM7.2]
There are oh so many reasons to root your phone and few not but that choice is yours
Sounds like only some of the data/libraries are able to me to SD on this app of yours so if you don't want to root it than you'll have to leave it on internal.
And FYI, many apps don't play well or are slowed considerably on SD, so be careful what you move and if you don't Yardley use an app its best to just not even download it, but again choice is yours
Sent from my Nexus 4 using Tapatalk 2
if you can't do root so sit back and relax.
Ok, so I decided to root. Which was actually freakishly easy. So how do I move stuff now? I have tried a number of apps, all of which only bring up "App Options" and we have determined that the "Move to SD" option there doesn't work correctly. I just want to figure out how to get the app and all of the data that it will download later to install on the SD, I never thought it would be quite this complicated.
Benjiboy180 said:
Ok, so I decided to root. Which was actually freakishly easy. So how do I move stuff now? I have tried a number of apps, all of which only bring up "App Options" and we have determined that the "Move to SD" option there doesn't work correctly. I just want to figure out how to get the app and all of the data that it will download later to install on the SD, I never thought it would be quite this complicated.
Click to expand...
Click to collapse
Use Link2SD.
Make a second partition (2-4 GB) and move (link) that app to the second partition.
Sent from my GT-I5500 [CM7.2]
Tried Link2Sd? I would rather use that.
Sent from my A89 using xda app-developers app
Ok, so I partitioned my 16GB card into two FAT32 partitions (10 GB and 4 GB) and a Swap Partition of ~850MB (roughly following this guide: http://forum.xda-developers.com/showthread.php?t=2126363). However, when I opened Link2SD and tried to select FAT32/FAT16 as the file system of the SD card's second partition it came up with the Mount Script Error "Mount script cannot be created. mount: I/O error". I had tried formatting with Ext4 and Ext2 file systems as well earlier, but when I selected either it said ext2 or ext4 (whichever I was trying to use) was not supported by my device (which I am assuming means my kernel does not support either).
Edit: Ok, so I changed it. I deleted the Swap partition (couldn't get the swap stuff to work anyway, it's not required right?). There is now 1 10GB partition and 1 5GB partition. Link2SD created the mount link just fine this time. Testing it out. "Install Location" gives a Warning "App2SD is not supported by your device. Because your device has a primary external storage which is emulated from the internal storage. You can link the app in order to move its files to your SD card." Does this mean that I can't automatically link files to the SD card?
Benjiboy180 said:
Ok, so I partitioned my 16GB card into two FAT32 partitions (10 GB and 4 GB) and a Swap Partition of ~850MB (roughly following this guide: http://forum.xda-developers.com/showthread.php?t=2126363). However, when I opened Link2SD and tried to select FAT32/FAT16 as the file system of the SD card's second partition it came up with the Mount Script Error "Mount script cannot be created. mount: I/O error". I had tried formatting with Ext4 and Ext2 file systems as well earlier, but when I selected either it said ext2 or ext4 (whichever I was trying to use) was not supported by my device (which I am assuming means my kernel does not support either).
Edit: Ok, so I changed it. I deleted the Swap partition (couldn't get the swap stuff to work anyway, it's not required right?). There is now 1 10GB partition and 1 5GB partition. Link2SD created the mount link just fine this time. Testing it out. "Install Location" gives a Warning "App2SD is not supported by your device. Because your device has a primary external storage which is emulated from the internal storage. You can link the app in order to move its files to your SD card." Does this mean that I can't automatically link files to the SD card?
Click to expand...
Click to collapse
Swap IS NOT needed.
Second partition should be ext 2/3/4.
Test to see if auto-link works.
Sent from my GT-I5500 [CM7.2]
Vagelis1608 said:
Swap IS NOT needed.
Second partition should be ext 2/3/4.
Test to see if auto-link works.
Sent from my GT-I5500 [CM7.2]
Click to expand...
Click to collapse
Good to know swap isn't needed. However, Link2SD did keep saying that Ext2 or Ext4 wasn't supported. I can try it again though.
Benjiboy180 said:
Good to know swap isn't needed. However, Link2SD did keep saying that Ext2 or Ext4 wasn't supported. I can try it again though.
Click to expand...
Click to collapse
Use Ext3. If it doesn't work use FAT. It can get buggy (not very often).
Also I think that if you can link apps 1 by 1, then you can (probably) use auto-link as well.
Sent from my GT-I5500 [CM7.2]
Vagelis1608 said:
Use Ext3. If it doesn't work use FAT. It can get buggy (not very often).
Also I think that if you can link apps 1 by 1, then you can (probably) use auto-link as well.
Sent from my GT-I5500 [CM7.2]
Click to expand...
Click to collapse
Ok, so Ext3 didn't work. So I stuck with the second partition being FAT32 as well. The mount worked fine.
When I try to create the link I get the following error: "Failure. create_link.com.whatbird.pro[1]: can't create /data/sdext2/data/com. whatbird.pro/lib/libfileutils.so: I/O error"
I was able to move the bulk of the apps Obb files to the SD using FolderMount. However, I am unsure how to move the 650MB Misc. data files to the SD.
Benjiboy180 said:
Ok, so Ext3 didn't work. So I stuck with the second partition being FAT32 as well. The mount worked fine.
When I try to create the link I get the following error: "Failure. create_link.com.whatbird.pro[1]: can't create /data/sdext2/data/com. whatbird.pro/lib/libfileutils.so: I/O error"
I was able to move the bulk of the apps Obb files to the SD using FolderMount. However, I am unsure how to move the 650MB Misc. data files to the SD.
Click to expand...
Click to collapse
Flash CWM recovery, in 'mounts and storage' press 'format SD-Ext'. This fixes the I/O error (I think).
If the misc files are libs then ALL of them can be moved/linked.
Sent from my GT-I5500 [CM7.2]
Vagelis1608 said:
Flash CWM recovery, in 'mounts and storage' press 'format SD-Ext'. This fixes the I/O error (I think).
If the misc files are libs then ALL of them can be moved/linked.
Sent from my GT-I5500 [CM7.2]
Click to expand...
Click to collapse
ROM Manager does not list the LG- E450B as a device supported by CWM Recovery so it won't to an install of CWM Recovery,
Benjiboy180 said:
ROM Manager does not list the LG- E450B as a device supported by CWM Recovery so it won't to an install of CWM Recovery,
Click to expand...
Click to collapse
Look for a custom build here on XDA.
Sent from my GT-I5500 [CM7.2]
Hello Folks! Did you ever wanted to increase internal storage? Well you came to the right place! Today I will show you the RIGHT way of increasing internal storage and allowing you to install more apps and games!
Note: You will need to be running an custom ROM before attempting to increase storage. Also root and superuser permissions will be needed. This method best works on gingerbread as it is more stable, I have tried it on ICS and JB but they may soft brick your device.
Step 1: Download and install MiniTool Partition Wizard Home Edition [DO NOT USE THE WINDOWS PARTITION AS IT DOES NOT SUPPORT EXT FORMATS]
Step 2: Plug your device in and make sure its mounted. Open MiniTool Partition Wizard, now you should see your SD card. [Back everything up before continuing]
Step 3: Right click on the SD card and click on "Format". This may take a while.
Step 4: Right click again and wipe the partition. Once that is done, split the partition. If you have a 8GB SD card I recommend you give 900MB for SD-EXT and the rest for SD.
Step 5: Before you apply, make the second partition (sd-ext) EXT 3 format. Do not touch the larger partition. Once your done you can unplug your device from the computer.
It should look like this:
Step 6: Go over to the Play Store and download "Mounts2Sd"
Step 7: Run the application and it should ask for super user rights
Step 8: Hopefully you will be presented with a screen like this.
Step 9: Press the menu button then tap on "Application Settings." Then tap "Install Mounts Script"
Step 10: Once step 9 is complete, tap the wrench icon and select apps and dalvik cache. (best effective way to increase internal storage)
Step 11: Scroll down and find "Driver" tap on that and select "Auto Detect"
Step 12: Restart! [NOTE: Boot may take a little longer than usual] [The speed on boot up now mainly depends on your SD card]
Now you are done! Here it what mine looks like now! So what ever you install, will go into the SD-EXT partition. Dalvik Cache is also now in SD-EXT!
I hope I helped you!
plz help
does it require to have the sd card partition formatted or is it fine if just use the without formatting the partition??? and does it require init.d support?
[email protected] said:
does it require to have the sd card partition formatted or is it fine if just use the without formatting the partition??? and does it require init.d support?
Click to expand...
Click to collapse
Well you don't have to wipe the SD card unless there are other partitions. Make sure you have space left for the SD-EXT and SD card. Also, init.d is installed in Mounts2Sd (it will overwrite the previous script)
Hope this helps!
plz help
TheUnknownThing said:
Well you don't have to wipe the SD card unless there are other partitions. Make sure you have space left for the SD-EXT and SD card. Also, init.d is installed in Mounts2Sd (it will overwrite the previous script)
Hope this helps!
Click to expand...
Click to collapse
hey fine but does it require to have any minimum amt of storage available to move the apps to the sd card partition
[email protected] said:
hey fine but does it require to have any minimum amt of storage available to move the apps to the sd card partition
Click to expand...
Click to collapse
Well if you followed my guide, you should have 2 partitions eventually. One SD (Fat32) and one SD-EXT (Ext3 for moving apps) Regarding to your question, it depends on what you are going to move to the SD-EXT partition. If you are moving big apps such as apps and games (no more than 50mb) then you will be fine. The minimum ideal external storage (SD-EXT) is about 300mb, because cache (and dalvik cache if you want) will take up most of the space. I recommend 400mb - 900mb for the SD-EXT partition.
I have tried it on ICS and JB but they may soft brick your device.
Click to expand...
Click to collapse
now a days everybody is using jellybean.iam on ics willing to upgrade to JB.what about these people ?
s7562 said:
now a days everybody is using jellybean.iam on ics willing to upgrade to JB.what about these people ?
Click to expand...
Click to collapse
Yes jellybean is the way to go however some devices (like mine) cannot run it well. I ran ics, gb and jb but gingerbread is the stablest for me. This is the only reason why I use gingerbread for NOW. Give a shot anyways, if your sd card is fast, it will perform fast when you use Mounts2sd. Class10 and above is good.
Hello Folks! Did you ever wanted to increase internal storage? Well you came to the right place! Today I will show you the RIGHT way of increasing internal storage and allowing you to install more apps and games!
Note: You will need to be running an custom ROM before attempting to increase storage. Also root and superuser permissions will be needed. This method best works on gingerbread as it is more stable, I have tried it on ICS and JB but they may soft brick your device.
Step 1: Download and install MiniTool Partition Wizard Home Edition [DO NOT USE THE WINDOWS PARTITION AS IT DOES NOT SUPPORT EXT FORMATS]
Step 2: Plug your device in and make sure its mounted. Open MiniTool Partition Wizard, now you should see your SD card. [Back everything up before continuing]
Step 3: Right click on the SD card and click on "Format". This may take a while.
Step 4: Right click again and wipe the partition. Once that is done, split the partition. If you have a 8GB SD card I recommend you give 900MB for SD-EXT and the rest for SD.
Step 5: Before you apply, make the second partition (sd-ext) EXT 3 format. Do not touch the larger partition. Once your done you can unplug your device from the computer.
It should look like this:
Step 6: Go over to the Play Store and download "Mounts2Sd"
Step 7: Run the application and it should ask for super user rights
Step 8: Hopefully you will be presented with a screen like this.
Step 9: Press the menu button then tap on "Application Settings." Then tap "Install Mounts Script"
Step 10: Once step 9 is complete, tap the wrench icon and select apps and dalvik cache. (best effective way to increase internal storage)
Step 11: Scroll down and find "Driver" tap on that and select "Auto Detect"
Step 12: Restart! [NOTE: Boot may take a little longer than usual] [The speed on boot up now mainly depends on your SD card]
Now you are done! Here it what mine looks like now! So what ever you install, will go into the SD-EXT partition. Dalvik Cache is also now in SD-EXT!
I hope I helped you!
Just wondering...
Hi there, I have a s5830 as well. I installed quite a number of apps in it but the internal storage is almost full. I have found this way of increasing the internal storage on many sites. But my question is, will it really work? I have read comments about this method. Most of the people say it just spoils your sd card. Let me know what you think. Thanks
leongkaixiang said:
Hi there, I have a s5830 as well. I installed quite a number of apps in it but the internal storage is almost full. I have found this way of increasing the internal storage on many sites. But my question is, will it really work? I have read comments about this method. Most of the people say it just spoils your sd card. Let me know what you think. Thanks
Click to expand...
Click to collapse
Isn't this pretty similar to Link2SD?
Wait I'm getting confused. Are these two the similar thing? If so how do you configure it? I installed link2sd and have partitioned my sd card. From here what are the procedures to expand your internal storage? Thx
Thank you friend! Helped me a lot!
About your statement...
Still man even you want it with mount2sd or link2sd still can't fully free up your internal memory coz still left some private apk that cost more on internal even that's been moved with any you named it mount2sd link2sd app2sd or with script and blahx2.... etc still there is no best method that work on freeing memory that also don't forget about statement that more app u can install more that u build cache or dalvik cache even that running front or background that also consumed your RAM issued even after you swap RAM To sd card that's finally broke your SD so That"s the end of it so if you have better solutions could you please send me email to [email protected] Thanks again.... cheers....
Zerien said:
Wait I'm getting confused. Are these two the similar thing? If so how do you configure it? I installed link2sd and have partitioned my sd card. From here what are the procedures to expand your internal storage? Thx
Click to expand...
Click to collapse
These two are similar in that they could make use of the partitioned sector of the sd card (known as the sd-ext) to act as additional "internal storage" for installing apps and works similarly as the phone internal memory. With the additional storage you could install more apps.
The above two are also similar in that they require init.d support and busy box. Most custom ROM normally are init.d supported and stock ROM's init.d support could be tested or added with app as per this tutorial: http://forum.xda-developers.com/showthread.php?t=1933849
Here are tutorials for Mount2SD and Link2SD.
Mount2SD Tutorial: http://forum.xda-developers.com/showthread.php?t=2389501
Link2SD Tutorial: http://forum.xda-developers.com/showthread.php?t=1614700
Samsung Galaxy Ace memory related problem
Dear All,
I have a problem to solve regarding my Samsung Ace S-5830 (with built in 270 MB !!! internal memory) installed on a CM11.
Small description:
SD card partitioned (1st: 5.7 GB FAT32, 2nd: 1.4GB ext2) into the device (all memory: 270 MB, internal: 178MB !!!) I have already installed Link2SD application, linked a few applications (App. cache cleaner, disk usage, Google play services, Total commander) -> SD card
My storage usage status according to Link2SD:
internal (/data) 130/178 MB
SD card (storage/sdcard0: 97% free
SD card 2nd part (/data/sdext2): 90% free
system (/system): 205/206 MB 0% free -> it seems to me it completely full. I think the install script determines the space, I don't know whether it is the proper status
cache(/cache):4/24 Mb 82 %
I have already cleaned caches a few times. When I want to install a 20 MB or so application (i.e Accuweather ) from Google Play than the application downloaded, the install procedure seemingly finished, but at the end of the process the error message:
Can't install app
Insufficient storage available
Which storage insufficient? Where is the app downloading to? Where is the Google play store cache? Is it configurable? How can I solve/improve the situation?
In general devices have remarkable internal memory (at least 1-2GB) instead of Samsung Ace. How can I overcome this disadvantage? Thank you for your valuable support.
KR,
Laszlo.