Could anybody post a rooting method for Micromax A25 please? I'm not sure of what I should do. Tried GingerBreak and z4root but they don't work.
Micromax has not provided drivers for A25. Does anybody have it? Please share.
Sent from my A25 using xda app-developers app
I am able to play Playstation One and N64 games on this phone through emulators. The 1GHz processor under its hood is really giving this tiny smarty some power. Much more could be done if it were rooted. Somebody please help!!!
Sent from my A25 using xda app-developers app
Micromax android smartphones are usually rooted with UnlockRoot. But I am unable to root A25 with it. It says ''failed to get shell root". Can anybody help?
Sent from my A25 using xda app-developers app
try to root it with SuperOneClick
http://forum.xda-developers.com/showthread.php?t=803682
CWM recovery for a25
CWM recovery for a25
http://forum.xda-developers.com/showthread.php?p=35836884
made by me. works nicely
Nandroid backup
Could any please provide me a nandriod backup or factory rom for mmx a25??? I need it to unbrick my smarty
New micromax has mt6515
The new micromax A25 has MT6515 processor . So the process for MT6575 is not working any more. Please help me some one, what can i do now?
Root as suggested in this video
davidheis said:
Could anybody post a rooting method for Micromax A25 please? I'm not sure of what I should do. Tried GingerBreak and z4root but they don't work.
Click to expand...
Click to collapse
Check this video, this will help:
youtube. com/watch?v= tSbxHs6SkFM
That phone also has MediaTek MT6515, same processor as Micomax A25 smarty.
davidheis said:
Could anybody post a rooting method for Micromax A25 please? I'm not sure of what I should do. Tried GingerBreak and z4root but they don't work.
Click to expand...
Click to collapse
THINGS YOU NEED:
*YOUR MICROMAX
*ORIGINAL USB CABLE
*DRIVERS FOR THE MOBILE
*A COMPUTER WITH AN INTERNET CONNECTION
*A SOFTWARE TO ROOT YOUR MOBILE (Preferably SuperOneClick)
*SPFLASH TOOL
WHAT TO DO:
Download all the files and extract all the archives.
insert the usb cable into the phone and into the computer
In your mobile enable “Usb debugging”. Do not enable “mass storage”.
Type “mmc devmgmt.msc” in start menu.
A window “Device Manager” will open. In that window you will see “UNKNOWN DEVICE” with a yellow triangle. Click it and you will see your mobile listed there.
Right click it and select properties.
In the drivers tab click update driver.
In the window that opens click "browse my computer for diver software"
Then browse to the folder “driver” you downloaded and extracted and install the mobile driver.
The remove the usb cable from the mobile and turn it off.
Wait till the mobile vibrates. Then remove the battery from the mobile.
Then insert the usb into the mobile without inserting the battery.
Device manager will refresh and show “OTHER DEVICES”->”MT65xx PRELOADER”.
Then right click and open its properties and install its driver as above. After this "SAFELY REMOVE" the mobile and reboot your device.
Then open the SuperOneClick folder and open SuperOneClick.exe. Then connect the mobile to the computer via the usb cable and then click root.
Your mobile is rooted now
Thank Shortfuse for SuperOneClick.
Tell me if you experience any problems.
Related
I have purchased a new low cost tablet from pantel. I tried to root it. But all rooting apps asks to enable USB Debugging option. But in my tablet i dont have that option. There is no Development menu under Settings > Applications menu. Is there any way to root my tablet?
OS: android 2.3.3
I got the USB Debugging option on my tab by following the steps given below,
Step1: Install the "LauncherPro" App.
Step2: If u cant see the installed "LauncherPro" app, install "HomeSwitcher" App.
Step3: Open the "homeswitcher" and open the "LauncherPro" from the list.
Step4: Now the launcher is changed in your tab. Go to the "home screen". long press on the empty area of the home screen.
Step5: You will be asked with some "Add to home screen" options. In that select "shortcuts".
Step6: You will be asked to "Select Shortcut". In that select "Activities".
Step7: In next screen scroll down to select "Settings". On pop down select "Development". Then select "Ok"
Now you got the "Development" shortcut on home screen. Open that to enable/disable USB Debugging option.
But still i'm not able to root my tab.
I tried all the apps listed below,
1. Z4root - it exits after few seconds while rooting. no change.
2. universal androot - no Fu Goo error.
3. Gingerbreak - Runs forever. no change.
Is there any other way to root.
try UNLOCK ROOT http://www.unlockroot.com/
also this one http://forum.xda-developers.com/showthread.php?t=1321582
Sent from my Nexus One using Tapatalk
I have the same tablet IS701R got USB Debugging same way as nikhil121096 but its not getting root tried the above method too but did not work.
BabyDroid said:
I have the same tablet IS701R got USB Debugging same way as nikhil121096 but its not getting root tried the above method too but did not work.
Click to expand...
Click to collapse
Same here
nikhil121096 said:
Same here
Click to expand...
Click to collapse
Can you connect the tab to Windows PC as USB Mass Storage? I think that the USB functionality has been blocked.
BabyDroid said:
Can you connect the tab to Windows PC as USB Mass Storage? I think that the USB functionality has been blocked.
Click to expand...
Click to collapse
Ya u r rite the debugging mode we get through d launcher is just for names sake
no effect other than charging when i connect the tab with my pc
I have the same device.... Planning to start a new thread with all the specs and roms and other stuff ....
Also If possible I wanna try and find a way to root this ..
it is infotm pad7 device .
no root trick found yet . guys keep trying .
thanks.
Any progress??
Sent from my LG-P500 using Tapatalk 2
deepv84 said:
Any progress??
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
No Bro ... No updates... Its not possible to root it ... !!!
The device is not popular enough for people to look for exploits ...
Anyone rooted it yet?
I found a way that worked for my penta is701r.
Go on this link mentioned below.
Download framaroot version 1.8
Follow instructions to root your device.
NOTE: Proceed at your own risk.It worked for penta is701 r . I cannot guarantee if it work for yours.
techverse.net/fastest-root-android-phone-computer/
(add http before)
i have rooted bsnl penta is701r
Using framaroot 1.8 and the pippin option inside it , i have successfully rooted my penta. the launcher and the debugging activity also works. i am trying to set up a cwm r ecovery and than try to enable the swap function...
thanks to all who suggested the same above
I have got Miromax A57 Ninja 3 recently
Searched and tried continuously for 2 weeks but got nothing working for rooting Micromax A57
Guys please help me out on this the phone performs great but root is needed to unlock its real potential,.......
Please help me out on this
Ya,, plz help to root this device ...
Sent from my Micromax A57 using xda app-developers app
ADB not showing the device
I am unable to use unlockroot or superone click because ADB is not showing my device in the device list....
Whereas device manager is showing ADB composite device under Android Devices Developers plzzzz help :crying:
Rooted The New MIcromax Ninja 3 A57
Finally Rooted the New MIcromax Ninja 3 A 57
Will Upload the step by step process soon.....:laugh:
Waiting for ur post buddy.. good work...:thumbup:
Sent from my Micromax A57 using xda app-developers app
newbie_a57 said:
Finally Rooted the New MIcromax Ninja 3 A 57
Will Upload the step by step process soon.....:laugh:
Click to expand...
Click to collapse
hey pls provide method to root a52 also. pls pls pls pleaseer
Sent from my LG-P500 using xda app-developers app
Guide to Unlock/Root Micromax A_57 Ninja 3
I am not responsible for any damage to your device mine worked perfectly fine
All the files are in zip file attached (kit_extractme.zip)
I am assuming that u ha basic knowledge of ADB and sdk
Ok here's how i got my A 57 rooted
Please remember to enable usb debugging on your device
Steps:
1. Remove/Uninstall all previous drivers for micromax a 57.
2.Connect the Device let windows install drivers it can then it will not be able to install some drivers.
3. After that an autorun prompt would appear for installation of the usb driver run that then all d drivers woud be installed and you will see ADB Composite interface under Android Devices in the Device Manager.
(If the autorun prompt does not appear Download the device drivers from micromax site and right click micromax A 57 under other device and browse to that folder and install the drivers)
4. now Go to C:\Users\your_username\.android folder there extract and paste the attached file adb_usb.ini that i have attached with the post.
NOte the file contains the vendor id of the device i guess it is same for all a57 but to confirm right click ADB composite interface goto properties> details> select Hardware Id's and find ur vendor id there as in the image attached If it is different then replace that in the adb_usb file
5.now open cmd as administrator and cd to you adb folder (in android sdk it is in platform tools download only adb from internet)
6. now give command adb start-server
then adb devices
it should now list your device as Micromax-a56 (see image adb_1) ( I don't know y it says micromax a56)
now download unlockroot from its website or google its offline installer
Now open Unlock root install it and then start it
Now press the "Root" button
It will get online device and ask you to select now Micromax A57
Select the device then it will say the device is already rooted you still want to root ???
but you continue and click yes
It will then root your device
and here you are your ohone is now rooted
Install superuser and SuperSU from play store
Now do whateva you want..................................
***************************************************
Please hit thanks if it was helpful
Lets see whether this work or not...
Sent from my Micromax A57 using xda app-developers app
not working
not able to find adb composite interference for micromax a57.if we run cmd as in forum not listed in adb.eventhough i hacked s2,s advance easy and simple.plz help or post some tutorial video for rooting this devices...plzzzz:crying:
---------- Post added at 09:17 PM ---------- Previous post was at 08:37 PM ----------
ya i run cmd and enter adb devices.it shows list of attached devices no name below.now what can i do???
ANSWER The following
have you Correctly placed adb_usb.ini in .android folder???
and wether windows have recognized it as ADB Composite interafce....??
..
yes i did steps 1 by 1 as u told.i tried this again and again.no use.it didn show my device name micromax a57
---------- Post added at 11:52 PM ---------- Previous post was at 11:23 PM ----------
ya i copied to user/.android.still it didnt show no device in tat adb.and also i checked in device manager..android adb composite not shown????
newbie_a57 said:
I am not responsible for any damage to your device mine worked perfectly fine
All the files are in zip file attached (kit_extractme.zip)
I am assuming that u ha basic knowledge of ADB and sdk
Ok here's how i got my A 57 rooted
Please remember to enable usb debugging on your device
Steps:
1. Remove/Uninstall all previous drivers for micromax a 57.
2.Connect the Device let windows install drivers it can then it will not be able to install some drivers.
3. After that an autorun prompt would appear for installation of the usb driver run that then all d drivers woud be installed and you will see ADB Composite interface under Android Devices in the Device Manager.
(If the autorun prompt does not appear Download the device drivers from micromax site and right click micromax A 57 under other device and browse to that folder and install the drivers)
4. now Go to C:\Users\your_username\.android folder there extract and paste the attached file adb_usb.ini that i have attached with the post.
NOte the file contains the vendor id of the device i guess it is same for all a57 but to confirm right click ADB composite interface goto properties> details> select Hardware Id's and find ur vendor id there as in the image attached If it is different then replace that in the adb_usb file
5.now open cmd as administrator and cd to you adb folder (in android sdk it is in platform tools download only adb from internet)
6. now give command adb start-server
then adb devices
it should now list your device as Micromax-a56 (see image adb_1) ( I don't know y it says micromax a56)
now download unlockroot from its website or google its offline installer
Now open Unlock root install it and then start it
Now press the "Root" button
It will get online device and ask you to select now Micromax A57
Select the device then it will say the device is already rooted you still want to root ???
but you continue and click yes
It will then root your device
and here you are your ohone is now rooted
Install superuser and SuperSU from play store
Now do whateva you want..................................
***************************************************
Please hit thanks if it was helpful
Click to expand...
Click to collapse
how much ram u had before and after rooting how much ram u have now?
unable to get online device with the unlock roo
my device listed as a56 but unable to get online device with unlock root plss help me
we have to install jdk also.i have to try the process again
Sent from my Micromax A57 using xda app-developers app
unable to get online device with the unlock root
my device listed as a56 but unable to get online device with unlock root plss help me
rooting A57
newbie_a57 said:
Finally Rooted the New MIcromax Ninja 3 A 57
Will Upload the step by step process soon.....:laugh:
Click to expand...
Click to collapse
please upload,I just purchasedA57 today,& wants to root.Thanks in advance,......
Root require of Qmobile A2
Hey every one i am new here so i am searching for rooting method for my Qmobile A2 it has MT6575 chipset 1ghz processor 256mb ram 512mb rom power sgx531t gpu chip android 2.3.6 i use superone click, unlock root app but both give error on shell root require (( so plz help me in rooting my cell phone thanks
please provide link for a57 driver
please provide direct link for micromax a57 drivers.i cant find it at official site.
thank you.
thx
Thanks you very much it worked:good:
Thanks for providing rooting method,today I have successfully rooted my A57.
Now expecting CWM recovery from u for A57, I believe u can build it.Thanks again!!!!!
Sent from my Micromax A57 using xda app-developers app
Respected Sir, as you know Videocon A15 is a cheapest price Indian mobile and the little RAM makes trouble for me. So I want to root my phone to use it in a better way, but I have tired by finding usb driver for videocon a15. But I can't find any usb driver. So I want to know how do I install usb driver for this handset?
Sent from my Micromax A27 using xda app-developers app
Try this things
Have you enabled USB - Debugging? (Menu > Setting > Application > Development > USB debugging > Turn it ON).
Probably afterwards you can install a driver.
For rooting use the Eroot application
xperiahtcrootingrom.com/how-to-root-videocon-a15-with-eroot-software/
Here is the app.
mediafire.com/download/62wi36ph36563oj/Eroot-v-1.3.5.zip
For rooting you don’t need pc just use framaroot look into this thread(given below) and download any one ver of framaroot .apk:
http://forum.xda-developers.com/showthread.php?t=2130276
Sent from my GT-S5360 using xda premium
Framaroot is not working on Videocon A15 also I've enabled USB Debugging but my computer still not able to find ysb driver. So pls can you tell me a name of windows app which can install any mobile usb drivers easily? Pls help.
Sent from my Micromax A27 using xda app-developers app
which windows you are using??
win 7 or xp ???
Sent from my GT-S5360 Using tapatalk 2
PreSS ThanKs If i HelPeD YoU ?!?
I am using Windows xp and Windows 7 both. Pls help.
Sent from my Micromax A27 using xda app-developers app
Please follow this simple steps on your win 7 pc to connect your videocon a15 device successfully
STEP 1: Copying the ZIP package
1. Copy the ZIP package to the your pc (LINK GIVEN BELOW)
2. Extract the zip package to an easy place to find
location such as the desktop
STEP 2: Verifying the unidentified
Android device
1. Open the Start Menu and click run
2. Type "devmgmt.msc" to open Device
Manager
3. Look for the unidentified Android device
(usually indicated by a yellow exclamation
mark)
STEP 3: Install/Update USB driver
1. Right-click the device and select "Update
Driver..."
2. Select "Browse my computer for driver
software"
3. Select "Let me pick from a list of device
drivers..."
4. Search for "Android Composite ADB
Interface"
5. Click "Have Disk..." and search for the INF
file (android_winusb.inf) located in the
folder you copied earlier
6. Click Next to install the USB driver
That's it!
The phone should now appear in Device Manager
as an Android ADB device.
You should now be able to initiate a remote USB
connection to the device.
http://helpdesk.rsupport.com/attachments/token/xahcpme6ofw594c/?name=Google_Android_USB_Driver.zip
Sent from my GT-S5360 Using tapatalk 2
PreSS ThanKs If i HelPeD YoU ?!?
One more question Sir, can you tell me a software which can Install any mobile usb driver?
As there are no similar usb drivers for all phones you have to install specific driver for specific phones only...! And yet i have not found any software for pc to install usb drivers for smartphones
So i have already given you the google driver package which will work on most devices (Given above)
If the above steps don’t work then you can try this,
download and install it on your pc
http://www.androidxda.com/data/MT6589-USB-VCOM-drivers.zip
Sent from my GT-S5360 Using tapatalk 2
PreSS ThanKs If i HelPeD YoU ?!?
enable USB debuggging mode and Use PdaNet software to Install drivers
Pdanet+ is used to share internet from android to pc...!
Not for installing usb drivers...!
plz read the question before posting anything...!
Sent from my GT-S5360 Using tapatalk 2
PreSS ThanKs If i HelPeD YoU ?!?
Then How can I install Videocon A15 usb driver as it has not official driver. Pls help...
Sent from my Micromax A27 using xda app-developers app
Can someone please download and check this
Hi Rajneesh,
I tried it and the feedback is only one word this suite is "Useless". Also, from the link you provided I read this.
Micromax PC suite can be used to connect PC to the mobile thus making file transfer easy. The same can be done by connecting MMX device with PC using USB cable (mass storage). So in this case it is of no use.
Click to expand...
Click to collapse
Thanks for the link.
screenshot of the suite.
How to use USB OTG function in micromax a27? How can I connect flash drive to my mobile via otg cable? pls reply I need this solution.
Micromax a27
hello.
i have Micromax a27 mobile. i root it. i root RootGenius.exe 4.45mb software. is work on windows 7 . (befor frist read fine). i frist install Micromax a27 usb drives for pc. next the phone setting>application>development>usb debugging enable(tik).
now connect data cable to pc and phone. now open rootGenius.exe and goto next. now root your a27. but root permishion is very danger for new members for Android. my frist time root after i try insert the sinhala fonts for font install Android app. app install after i turn off mobile. but cannot power on. it is auto restart. .....
but i know normali root for Android. i root 2nd time. for now 2weeks no probleams. after root auto install the kinguser app. the app is wery use for root mobile. becous this app can root permishion on/ off ..
only root permishion on the your work after off permishion. this system is i use. im sri lanka , sinhala. sory this word is not correct. but this system is working.
rember after root woranty volid. and carfully.
now i like usb otg for a27. you know otg for a27 please email me, [email protected]
b.o.l.
So i am here to vaist 10 posts because i cannot ask in my forum thread.
Really stupid!
I would like ask an XPERIA Z question to existenZ ultimate rom.
I got this OTA update.
But last time i got the 1.5.5 update,could not update,because at the restart the phone doesnt booted in the dual recowery.
But if i booted normally and at the begining access to the dual recowery, deleted cash mem. and manually installed the zip after the restart in OTA update the sys recognise this update as an failure. So what now?
arnabghosh999 said:
How to use USB OTG function in micromax a27? How can I connect flash drive to my mobile via otg cable? pls reply I need this solution.
Click to expand...
Click to collapse
Hi
Just plug the micro usb of otg to your device and plug a pendrive on the other end of pendrive i,e the female port.
Probably you will need to remove the memory card of your device.
If Helped Hit Thanks.