Related
my lappie which is a
Windows Vista 32 bit
it is not detecting the APX mentioned in the thread
http://forum.xda-developers.com/showthread.php?t=861950
Now I am fixed in a reboot loop and I have tried everything suggested in this thread
OK I know I had no business doing this because I dont know the D of developing....
but the TNT Lite worked so well and was so easy to install I got carried away by it and tried to install the amd to let my computer detect the gtab. this is where I got stuck!!
to start from the beginning
I installed TNT lite on my GTab and it worked really well, I could see Youtube videos and access the Android market
Then I thought I should maybe transfer a few files to the Gtab so I could view them, but when I tried to do that I found out it was another long process, Normally being a non developer I would have probably just tried to find out a non hacking method to do this like download it from gmail or something. Or just use an SD card
But it had been so easy to install the alternate ROM from instructions in this forum I thought maybe it wouldnt be a big issue..sad!!
It was!
Now my one day old GTab wont start up and if it does it just keeps displaying a weird kind of screen with squares on it which I am assuming is the reboot screen
And so I tried to use Nvflash to restore it like mentioned in the thread above but my lappie wont detect it at all..
So now I really need help before I attempt anything else on my own
I dont want to send my Tablet back and would appreciate any help from experienced developers like you guys...!
Please do help me and I promise never to attempt something like this again..!!
Thanks
please !!!! anyone!!!!!
First, I think you need to breathe. Patience is a virtue. *NOTHING* about being excited will help. So calm down first, then go.
Did you install the drivers listed on that page?
Here's a direct link:
http://www.myadventvega.co.uk/SystemUSB.zip
Getting them to install can be a bit tricky, though, since it's not an executable. Download it, unzip it, go into the Flash USB folder, go into the USB folder, right click on the nvidiausb.inf file, and select install. That *should* install the driver. However, it might not. If it doesn't, post back and say what happened.
And as far as transferring files - there's no need to hack to do that. Just connect via USB, pull down the USB attachment notification on your tablet, and say connect. Then drag and drop on the computer. Done.
tedlogan42 said:
First, I think you need to breathe. Patience is a virtue. *NOTHING* about being excited will help. So calm down first, then go.
Did you install the drivers listed on that page?
Getting them to install can be a bit tricky, though, since it's not an executable. Download it, unzip it, go into the Flash USB folder, go into the USB folder, right click on the nvidiausb.inf file, and select install. That *should* install the driver. However, it might not. If it doesn't, post back and say what happened.
Done.
Click to expand...
Click to collapse
Thanks, I think I did forget to breathe..
It says " the inf file you selected does not support this method of install"
Alright. Crap. I forgot that happened to me too when I had to do it.
I think I had to install it via using Device Manager. Here's how you can get to it in Vista (I'm about to sleep, so I'm saving typing time):
http://windows.microsoft.com/en-US/windows-vista/Open-Device-Manager
Once you've got that open, go ahead and boot the tablet into APX mode, meaning that from a powered-off state, you'll hold down the power and volume - buttons simultaneously until your G-Tab comes up and the goes back to a black screen (words stolen from the original NVflash post).
Connect it to your computer (while Device Manager is opened). When you connect it, you should see a new device appear that is labeled Unknown Device. Right click on it, and select Properties. Click the Driver tab (may be different - I'm on 7, but I think it's the same). Click the Update Driver button. Choose the "browse my computer for driver software." Using the browse function, point it to the folder with the inf in it (%wherever_you_extracted_it%\System USB\Flash USB\USB). Click Next.
I think that's what I had to do on mine when I borked my tablet with an experimental build of Vegan Ginger. If the driver installs, that should allow you to then go on with the rest of the directions. If it doesn't, post more information. I can't promise I'll be on any time soon, but maybe someone else can help out if they're up.
ok it says at the end when I have pointed it at the driver file (NVidiaUsb.inf)
"The folder you specified doesnt contain a compatible software driver for your device. If the folder contains a driver make sure that it is designed to work with windows for 32 bit systems."
This is what happened last time also, and then the system says that I already have the most compatible driver for the system and puts me on "Microsoft WPD filesystem volume driver"
EDIT: I should mention that I also had a tough time deleting my NVidia driver, but as soon as it was deleted, it was automatically replaced by the "Microsoft WPD filesystem volume driver"
Not sure what to tell you. The INF clearly points to the x86 version, so it should install. Is there more than one unknown device in your device manager? If so, you might somehow have the wrong one, though the approach earlier should have made it easier to track the new one.
Sorry. You might want to try getting on IRC to see if other people have some bright ideas. An NVFlash does seem like what you need to do, though.
EDIT: I did some digging into the forums (you should probably continue that). Here's a thread all about these drivers.
http://forum.xda-developers.com/showthread.php?t=1012009&highlight=NVFlash+USB+Driver+Solution
If those fail, there's another method that involves installing the entire SDK, which is linked on this thread (the second post about the MSI):
http://forum.xda-developers.com/showthread.php?t=882814
However, my impression is that that option might create more complexity than it's worth.
I haven't done anything but what I explained earlier (if I remember right - it's been a while), so I can't talk about any other approach. However, these will at least maybe make my failure into less of a dead end.
I ran into the exact same problem a few weeks ago after installing CM7...
http://forum.xda-developers.com/showthread.php?t=902860&highlight=usbdeview
I used a program called USBDEVIEW and just obliterated all the usb drivers (I guess the safe way is to remove any mention of Nvidia usb devices) and rebooted the computer. Let the system reinstall all the USB devices. Restarted the computer again. AND ONLY THEN did I plug in the gTablet. Once plugged in, the system automatically installed drivers and recognized the tablet, you may have to point to the inf file if it fails to install automatically.
USBDeview from CNet
http://download.cnet.com/USBDeview/3000-2094_4-10614190.html
Good luck!
Don't let this setback keep you from using great ROMS like VEGAn Tab Gingerbread RC1... once you've mastered the NVFlash process and CWM recovery install (I prefer the external CWM install) you are all set for other mishaps.
http://forum.xda-developers.com/showthread.php?t=865245
supergroverthm said:
I ran into the exact same problem a few weeks ago after installing CM7...
http://forum.xda-developers.com/showthread.php?t=902860&highlight=usbdeview
I used a program called USBDEVIEW and just obliterated all the usb drivers (I guess the safe way is to remove any mention of Nvidia usb devices) and rebooted the computer. Let the system reinstall all the USB devices. Restarted the computer again. AND ONLY THEN did I plug in the gTablet. Once plugged in, the system automatically installed drivers and recognized the tablet, you may have to point to the inf file if it fails to install automatically.
USBDeview from CNet
http://download.cnet.com/USBDeview/3000-2094_4-10614190.html
Good luck!
Click to expand...
Click to collapse
I tried to uninstall the nvidia drivers using USB deview, it asked me if I wanted to uninstall drivers I said yes but I can still see the drivers in the USB list
Is that ok?
You need to run USBDeview as an administrator. Right click on "USBDeview.exe" select "run as administrator" and then when you are asked to confirm, click "yes"
Only then when you "uninstall selected device" the device will disappear. Otherwise you are only in view mode.
supergroverthm said:
You need to run USBDeview as an administrator. Right click on "USBDeview.exe" select "run as administrator" and then when you are asked to confirm, click "yes"
Only then when you "uninstall selected device" the device will disappear. Otherwise you are only in view mode.
Click to expand...
Click to collapse
OK I just figured that out and was coming to post that. Thanks for realising that is what I was doing..
I conneccted the tablet to my PC.but it still does not detect it
The only time my PC detected it was the first time when I pointed it to the nvflash folder. After that it has never detected it and I havent seen the yellow ! icon.
what am I doing wrong?
Firstly, powerdown the gTab.
Turn on power while holding "vol -" to enter into APX mode (you'll see the viewsonic birds then the screen will go blank)
On the bottom right corner of the Vista screen, click on the USB icon that says "safely remove hardware and eject media"
Look at the list the pops up, does one of the devices say APX?
no It only says safely remove mass storage device
oh wait
my tablet switched on to the reboot screen and didnt stay black
trying it again
it installed "NVIDIA boot recovery driver for mobile devices", is that correct?
This is where I get stuck, my device manager doesnt show the apx at all whatever I do, what am I doing wrong?
I think there was a way to overlook safety signatures somewhere but I couldnt get to do it,
Is there some way I can ask my computer to overlook the safety signatures?
EXCELLENT!!! Now you are ready for NVFlash instructions:
http://forum.xda-developers.com/showthread.php?t=861950
BTW, you will not be able to see the device under windows explorer as in the normal way such as "D:" "E:" etc drive.
Once you get everything setup per the above instructions and run "nvflash_gtablet.bat" you will see the flashing process in the text box.
Just want to make sure...
Under Vista Device Manager
-- "universal serial bus controllers" you have "NVIDIA USB Boot-recovery driver for Mobile devices"
supergroverthm said:
Just want to make sure...
Under Vista Device Manager
-- "universal serial bus controllers" you have "NVIDIA USB Boot-recovery driver for Mobile devices"
Click to expand...
Click to collapse
Yes I do, so I should start the process now?
THANKS a lot, will update you as it goes on.
Yes, follow Roebeet's instructions and you should be set. Also play it safe and keep your gTab plugged in unless you are sure of the amount of battery life left.
(I cannot post links at this time, a quick Google Search or a look at the Topic titled "Full Root")
The goal of this guide:
I rooted my family members Nook last night but got hung up for a few hours trying to get the ADB Drivers enabled. This is how I made it work. This guide will be expanded and improved once I have my own Nook Tablet (Jan 12th).
Things you need:
• Nook Tablet (Duh)
• USB cord to go between NT and Windows PC
• PC with Windows installed (Tested on XP and x64 Windows 7)
• TGPS_Launcher.apk Installed to your Nook
• ADB USB Drivers for Nook Tablet Extracted to C:\Ntroot on your PC
• USBDeView open on the Windows PC
Step 1:
Ensure that your Nook is version 1.4.0 and not 1.4.1. (I will expand this step later when I have a nook in my hand, I suggest a Google search if you do not know how to do this)
Step 2:
Find this thread on your Nook and download the TGPS_Launcher.apk to your device, then install it. This is well covered in many other threads. (Will expand this step when I have a nook in my hand)
You should now be able to allow USB Debugging, and disable Auto Mount. These settings can sometimes change without your permission, so always uncheck and recheck them to ensure they are properly set.
Step 3:
Plug in your Nook to your PC. Your nook should still respond to your commands, if it tell you in USB Mass Storage mode, then retry Step 2.
Go into your Device Manager. If your Nook shows up with a yellow explanation mark indicating an Error, then you’re in business and really don’t need this guide. All you need to do is update drivers from the file C:\Ntroot. However, assuming that your Nook shows up under Disk Drives and USB Mass storage, then ADB wont be able to see your Nook, please keep reading.
Step 4:
Time to start the USBDeview utility. This utility will open to a list of almost all the drivers your computer has for USB Devices. We are going to uninstall a few of them, namely anything that says “Android” “Nook” or in my case, “Motorola”. You do not need to remove any that specify ADB.
Near the top right hand side, you can sort drivers by when the device was last connected. Do this, then remove any utilities used when you plugged your nook in. Done? Ok, time to see if your work was for nothing.
Step 5:
Make sure once again that USB Debugging is turned on for your Nook. Unplug the Nook, then Unchecked USB Debugging and Check it again. Now plug your device back in and check in Device Manager. You will hopefully see one of two things:
A: You will see your nook with a yellow error icon next to it, which means you just need tell it to update from C:\Ntroot.
B: At the top of the device manager you will see Android Devices, and your nook will show up as Android Composite ADB Interface
If your Nook is still showing under disk drives and mass storage, then try steps 3 and 4 again. Still having trouble? Do a factory reset and try again from step 1.
You should now be able to run your rooting program!
(I feel this should be in the Dev forum, but this is my first post and I was not allowed. Perhaps a mod would like to move this topic?)
I plan on purchasing my own Nook on the 12th on Jan, at which point I will add pictures and expand on my guide. This guide is written from memory and will be edited and improved.
Please consider this guide an Alpha Version
Good write up!
The procedure worked fine on my laptop. When I did it on on my home PC I forgot to disable auto-mount and the Nook installed itself as mass storage. I was able to right click -> un-install all the USB Mass Storage entries (with the Nook unplugged), disable auto-mount, plug the Nook back in, and have it show up correctly.
In short, I did not need to use "USBDeView" as I was able to remove the diveres manually. I suppose if you have more than a handful for USB devices (I just have a Mouse, Keyboard, and printer) "USBDeView" might be helpful to determine which drivers to un-install...
The device manager is enough for most people, but there is a somewhat large number of us that are having trouble still. Possibly because of other devices we have installed before. (I dont understand how all the drivers work and I wont pretend to)
Some people have go so far as putting a fresh install on Windows on a partition of a PC.
I had this problem with both my laptop and my desktop, which surprised me. This worked on both the laptop and PC, so hopefully it can help other people.
I cant wait to get my own tablet on the 12, I will take lot of pictures and make this process more user friendly.
I did all of the steps several times and I still get WPD Driver for the portable device and mass storage for my Nook Tablet. I am guessing I am up a river without a paddle right now.
I will try it in Linux and/or try it on someone's Windows machine.
I am trying to install the drivers from Google's SDK package. So I browse to the correct folder, but device manager says "windows could not find driver software for your device".
Any suggestions? Is there any other set of drivers specifically for NT?
mtelesha said:
I did all of the steps several times and I still get WPD Driver for the portable device and mass storage for my Nook Tablet. I am guessing I am up a river without a paddle right now.
I will try it in Linux and/or try it on someone's Windows machine.
Click to expand...
Click to collapse
Did you sort by last time plugged in and delete all of those too? Have you re-checked and then re-un-checked automount/usb debugging and such?
This is interesting, you'll have to come back and let me know if you ever get it working on your PC. Maybe its a good excuse for a nice healthy re-format and reinstall of windows?
l3ft3r1s said:
I am trying to install the drivers from Google's SDK package. So I browse to the correct folder, but device manager says "windows could not find driver software for your device".
Any suggestions? Is there any other set of drivers specifically for NT?
Click to expand...
Click to collapse
I don't know if they are different, but I used the drivers specificly from the thread about rooting the NT. [I would post a link, but I'm typing from my phone]
You have the yellow error mark next to your device? If so you've almost got it!
The_Joe said:
I don't know if they are different, but I used the drivers specificly from the thread about rooting the NT. [I would post a link, but I'm typing from my phone]
You have the yellow error mark next to your device? If so you've almost got it!
Click to expand...
Click to collapse
Yeap, that did the trick, thanks. Drives installed successfully this time, but adb devices still returns nothing.
Thats very odd. It shows up in device manager as an ADB device?
If so, please try the NookandZergy file, then copy the results so we can try to farther assist
What devices have you rooted before?
I cannot help but feel I will be 100x more useful in a week when I have my device in hand...
adb error: device offline
This drove me nuts for at least a day. Turns out it is what happens when you are plugged into a USB 3.0 port on your PC side. Find out which USB is 2.0 (Front Panel for ZT Systems), use it and life suddenly gets really good.
The_Joe said:
Thats very odd. It shows up in device manager as an ADB device?
If so, please try the NookandZergy file, then copy the results so we can try to farther assist
What devices have you rooted before?
I cannot help but feel I will be 100x more useful in a week when I have my device in hand...
Click to expand...
Click to collapse
At last, after many different things I tried, I am getting a response to adb devices!
I tried disabling and uninstalling usb devices, uninstalling java 7 and installing java 6, re-installing android sdk, at last it worked. Sorry, I can't guess what the problem was :/
l3ft3r1s said:
At last, after many different things I tried, I am getting a response to adb devices!
I tried disabling and uninstalling usb devices, uninstalling java 7 and installing java 6, re-installing android sdk, at last it worked. Sorry, I can't guess what the problem was :/
Click to expand...
Click to collapse
The problem is sdk uninstall and use ccleaner to clean your PC and registries. Use the drivers provided in this forum
Sent from XDA using one of my Android Toys
Edited post to: Sorry to bother anyone, I found the problem. Thank you all for helping!
Well I have done everything and still get permission denials for copying and chmod on my Nook Tablet.
Took the Nook to work and tried it on a fresh machine. Everything went great. Drivers installed and everything ready for usb debug and non-automount and then I run into the same permission errors and being denied access to the folder for Zerk and no chmod.
Same issue no matter what machine. What is wrong with my tablet? I am re-rooting it from being automatically upgrade to 1.4.1. I get it to 1.4.0 with the SD card restore.
LadyPenley said:
Edited post to: Sorry to bother anyone, I found the problem. Thank you all for helping!
Click to expand...
Click to collapse
In the future don't delete your original, just post an edit with the fix. That way when someone else has a similar problem your post can help.
Sent from my BNTV250 using xda premium
mtelesha said:
Well I have done everything and still get permission denials for copying and chmod on my Nook Tablet.
Took the Nook to work and tried it on a fresh machine. Everything went great. Drivers installed and everything ready for usb debug and non-automount and then I run into the same permission errors and being denied access to the folder for Zerk and no chmod.
Same issue no matter what machine. What is wrong with my tablet? I am re-rooting it from being automatically upgrade to 1.4.1. I get it to 1.4.0 with the SD card restore.
Click to expand...
Click to collapse
Did you find a solution? Thats a problem I sadly dont know how to help with. I would start with:
-Check USBDeview and delete anything android/Nook/usb related. Delete just about everything.
-Restart the device
-Uncheck and recheck the USB Debugging boxes
-Recheck and uncheck the auto-mount box
-Test
-Try a different USB Port
-Try another PC
Thanks but didn't work.
thanks, Joe. I did exactly as you mentioined below and had the Android/Nook appear at the top of the Devices listing. However, the adb command still can't find the device. Any suggestions?
Stan White
*****************
The_Joe said:
(I cannot post links at this time, a quick Google Search or a look at the Topic titled "Full Root")
The goal of this guide:
I rooted my family members Nook last night but got hung up for a few hours trying to get the ADB Drivers enabled. This is how I made it work. This guide will be expanded and improved once I have my own Nook Tablet (Jan 12th).
Things you need:
• Nook Tablet (Duh)
• USB cord to go between NT and Windows PC
• PC with Windows installed (Tested on XP and x64 Windows 7)
• TGPS_Launcher.apk Installed to your Nook
• ADB USB Drivers for Nook Tablet Extracted to C:\Ntroot on your PC
• USBDeView open on the Windows PC
Step 1:
Ensure that your Nook is version 1.4.0 and not 1.4.1. (I will expand this step later when I have a nook in my hand, I suggest a Google search if you do not know how to do this)
Step 2:
Find this thread on your Nook and download the TGPS_Launcher.apk to your device, then install it. This is well covered in many other threads. (Will expand this step when I have a nook in my hand)
You should now be able to allow USB Debugging, and disable Auto Mount. These settings can sometimes change without your permission, so always uncheck and recheck them to ensure they are properly set.
Step 3:
Plug in your Nook to your PC. Your nook should still respond to your commands, if it tell you in USB Mass Storage mode, then retry Step 2.
Go into your Device Manager. If your Nook shows up with a yellow explanation mark indicating an Error, then you’re in business and really don’t need this guide. All you need to do is update drivers from the file C:\Ntroot. However, assuming that your Nook shows up under Disk Drives and USB Mass storage, then ADB wont be able to see your Nook, please keep reading.
Step 4:
Time to start the USBDeview utility. This utility will open to a list of almost all the drivers your computer has for USB Devices. We are going to uninstall a few of them, namely anything that says “Android” “Nook” or in my case, “Motorola”. You do not need to remove any that specify ADB.
Near the top right hand side, you can sort drivers by when the device was last connected. Do this, then remove any utilities used when you plugged your nook in. Done? Ok, time to see if your work was for nothing.
Step 5:
Make sure once again that USB Debugging is turned on for your Nook. Unplug the Nook, then Unchecked USB Debugging and Check it again. Now plug your device back in and check in Device Manager. You will hopefully see one of two things:
A: You will see your nook with a yellow error icon next to it, which means you just need tell it to update from C:\Ntroot.
B: At the top of the device manager you will see Android Devices, and your nook will show up as Android Composite ADB Interface
If your Nook is still showing under disk drives and mass storage, then try steps 3 and 4 again. Still having trouble? Do a factory reset and try again from step 1.
You should now be able to run your rooting program!
(I feel this should be in the Dev forum, but this is my first post and I was not allowed. Perhaps a mod would like to move this topic?)
I plan on purchasing my own Nook on the 12th on Jan, at which point I will add pictures and expand on my guide. This guide is written from memory and will be edited and improved.
Please consider this guide an Alpha Version
Click to expand...
Click to collapse
whitets said:
thanks, Joe. I did exactly as you mentioined below and had the Android/Nook appear at the top of the Devices listing. However, the adb command still can't find the device. Any suggestions?
Stan White
*****************
Click to expand...
Click to collapse
I had literally this exact same problem the 6th time I restored and flashed. IF im right, you just need to uncheck then recheck usb debugging.
Let me know if it works!
--Edit--
This is finally solved. There was a problem with my computer's ADB RSA key, so I simply had to delete the key file and rerun ADB and I Received the RSA Key Fingerprint window instantly on my G3.
For the full description of the problem look here:
I'm having issues trying to root my phone. I'm using the ioroot method mentioned here.
I get to "* daemon started successfully *" then nothing. After a lot of troubleshooting I know it's because my phone won't allow access by my computer. I never receive the RSA Fingerprint window allowing my computer access to my phone. Here's what all I've tried:
-Put phone into Internet>Ethernet mode (and I've also tried Internet>Modem, MTP and Camera modes as well just to say I did).
-Enable Developer Options and enable USB Debugging.
-Installed the drivers linked in the ioroot page (I've also downloaded the drivers directly from LG - believe it or not ... it's the same file).
-Installed the Verizon Software Assistant from the phone after connecting to the computer.
-Updated my ADB version with the SDK Manager.
-Used different USB ports on my computer as well as two different USB cables (one of which came with the G3).
-Checked Device Manager, all is as it should be and no unrecognized devices.
When I ran the adb server without the ioroot batch file, typing "adb devices" would return my phone's serial followed by "offline." It did this until I updated ADB; then when typing "adb devices" it would return the serial followed by "unauthorized." I've tried all various methods and combinations of switching adb debugging on and off, switching developer options on and off, installing and uninstalling and reinstalling the LG drivers, unplugging and replugging the USB cable, power-cycling all devices including myself at night, doing these methods with long pauses in between (10 minutes to ensure I wasn't being impatient), scratching my head, drinking more coffee, switching to rum and swearing at all devices but nothing seems to make a difference.
What am I missing?
I've got the Verizon LG G3 in White (LG-VS985W)
Software version VS98510B
Windows laptop running Vista 32 bit (I know I know, "eeew Vista")
I was able to obtain root using a different computer, here's what I tried with my laptop after gaining root to get it and my G3 on speaking terms:
-Deleted the ADB_Keys file on the G3 (/data/misc/adb/adb_key): no change.
-Compared running Windows services between Vista and 8.1 and started services which were running on 8.1 but not vista: no change.
Here was the resolution:
There turned out to be a problem with my laptop's ADB RSA key. I'm assuming my G3 was rejecting a bad key and disallowing my laptop to connect to it via ADB.
ADB saves a key file in one of multiple places on a Windows computer, the first is in the location where adb.exe is (C:\android), the second is in the user's profile (C:\Users\*username*\.android), the third place is in the Windows system files (C:\Windows\System32\config\systemprofile\.android), the file is simply named "adbkey" with no extension. If there is no key file when ADB runs, it will generate one automatically.
Mine was located in my user folder (C:\Users\*username*\.android\). All I had to do was delete the adbkey file (there was also a file named "adbkey.pub" which I deleted as well), restart the adb server in command prompt (adb start-server) and plug my phone in. I instantly received the RSA Fingerprint Key window on my G3 allowing connection between the two devices. Then typing "adb devices" returned my phone's serial number followed by "device" showing it was available. I went back to the C:\Users\*username*\.android\ folder and sure enought there were new "adbkey" and "adbkey.pub" files.
Problem finally fixed!
Here are some VERY useful links which helped me come to this fix:
How ADB enables a secure connection
Reconstructing ADB's RSA key file
Try using this set of Vertizon g3 drivers: https://mega.co.nz/#!58YHAZaQ!yNlgZG1m7toHBZp_0HF1jSQ66gMoZmmiDrNq9W5aJIc
Open the .zip, run the .msi file on Windows.
I do not run the G3's auto-install software when I plug it into the PC.
I do set the G3 to "PTP" USB before initially connecting to the PC.
The adb file in the ioroot "bts" subfolder should be okay to run on Windows.
When the phone is attached to the PC, change its USB connection type to Internet, with submenu type Ethernet. At least on my phone, right when I change the phone connection to Internet/Ethernet is when I get the phone popup to accept the PC's RSA fingerprint.
If I then run "adb devices" on my PC, I'll see the random ID followed by "attached", which means I have a good connection. If this doesn't happen, unplug, then replug, the USB connection at the PC side.
Then I can "cd .." and run ioroot.bat.
Good luck!
markfm said:
Try using this set of Vertizon g3 drivers: https://mega.co.nz/#!58YHAZaQ!yNlgZG1m7toHBZp_0HF1jSQ66gMoZmmiDrNq9W5aJIc
Open the .zip, run the .msi file on Windows.
I do not run the G3's auto-install software when I plug it into the PC.
I do set the G3 to "PTP" USB before initially connecting to the PC.
The adb file in the ioroot "bts" subfolder should be okay to run on Windows.
When the phone is attached to the PC, change its USB connection type to Internet, with submenu type Ethernet. At least on my phone, right when I change the phone connection to Internet/Ethernet is when I get the phone popup to accept the PC's RSA fingerprint.
If I then run "adb devices" on my PC, I'll see the random ID followed by "attached", which means I have a good connection. If this doesn't happen, unplug, then replug, the USB connection at the PC side.
Then I can "cd .." and run ioroot.bat.
Good luck!
Click to expand...
Click to collapse
... no dice.
Ok, I'm switching to my Windows 8.1 machine (my laptop is my server and android-dirty-work machine).
So it worked without hesitation on my 8.1 machine. I used the drivers listed in the ioroot thread (same as the drivers from LG) and the process went off without a hitch. I have no idea why my Vista machine and G3 don't get along but I'll need to figure it out when I do further adb work because I use my laptop for that.
Thank you markfm for the extra drivers.
I'll call this solved for now but if I find out further reasons why it didn't work I'll post it here for others who have similar struggles.
Ok I finally solved this. It turned out there was something wrong with my laptop's ADB RSA key. All I had to do was delete the key file, run the ADB Server and connect the phone. ADB will automatically generate an RSA key if none exists. The RSA key was located in C:\Users\*username*\.android and was simply named "adbkey" with no extension. There was also a file named adbkey.pub (Microsoft Publisher) which I'm assuming is a viewable version of the key. I deleted both of these, re-ran the ADB server and voila I instantly received the RSA Key Fingerprint confirmation window on my G3.
Done and done!
unable to generate RSA key on my MCB
I've read and re-read all the entries addressing this issue. I have a black G3 and am using a 2013 Mac Book Pro. I've followed the instructions to the letter many times but with no success. I'm at a loss. Any ideas would be greatly appreciated.
scooterd said:
I've read and re-read all the entries addressing this issue. I have a black G3 and am using a 2013 Mac Book Pro. I've followed the instructions to the letter many times but with no success. I'm at a loss. Any ideas would be greatly appreciated.
Click to expand...
Click to collapse
You'll have to bear with me because I'm not familiar with Mac file structure.
I would start from scratch. Do all these before trying to run adb again.
On your computer:
-Delete adbkey & adbkey.pub from the .android folder (I'm not sure where that is on a Mac, Home\.android?).
-I'm not sure if Macs have a device manager, but check that your phone is correctly recognized and the drivers are installed properly.
On your phone:
-Ensure you've got developer features unlocked
-Double check that you've got usb debugging enabled.
-Tap the "Revoke USB Debugging Authorizations" button below USB debugging in developer options.
-When you're plugged in be sure to set your connection to Internet >>Ethernet (you'll see the debugging icon in the notification bar if it's connected right).
I know a lot of that is basic and redundant but if it's all done correctly then it should work. If it doesn't work it gives us a good starting point to troubleshoot.
If you want to test it open terminal, change directory to the bts folder in the ioroot folder and start adb (adb start-server), with everything done right you should get the rsa window on your phone right now. Type "adb devices" and see what comes back.
Thanks for the assistance. I never could get anywhere with my MBP so I used Windows. I downloaded the drivers and got the RSA key after revoking all prior authorizations. However, but my computer still won't see my G3 in internet/usb debugging mode. It reads it in MTP, PTP and USB charge mode. But that's it. I've rooted numerous phones before, mostly Samsung, but this one has me stumped. Any ideas?
scooterd said:
Thanks for the assistance. I never could get anywhere with my MBP so I used Windows. I downloaded the drivers and got the RSA key after revoking all prior authorizations. However, but my computer still won't see my G3 in internet/usb debugging mode. It reads it in MTP, PTP and USB charge mode. But that's it. I've rooted numerous phones before, mostly Samsung, but this one has me stumped. Any ideas?
Click to expand...
Click to collapse
Use whatever mode will enable USB Debugging. If Internet>>Ethernet doesn't work then use any other mode that will. It's not necessarily important what mode your phone is in, but what mode will allow USB Debugging. If you have it in MTP, PTP, Camera or any other, and you have the USB Debugging icon in the notification bar, try the "adb devices" command and if it returns "*serial* device" then you should be good to go to root.
Once your phone has enabled USB Debugging and accepted the RSA key from your computer then the connection is made and your phone will accept the ioroot commands.
scooterd said:
Thanks for the assistance. I never could get anywhere with my MBP so I used Windows. I downloaded the drivers and got the RSA key after revoking all prior authorizations. However, but my computer still won't see my G3 in internet/usb debugging mode. It reads it in MTP, PTP and USB charge mode. But that's it. I've rooted numerous phones before, mostly Samsung, but this one has me stumped. Any ideas?
Click to expand...
Click to collapse
Is your phone a Verizon Model (VS985)? I'm assuming not because I don't have PTP mode on my G3. If it's not Verizon, the ioroot method suggests using PTP mode.
Yes it is a Verizon VS985. I bought it last week. I have four options, charge, MTP, internet and PTP when I connect my phone to the PC. I get usb debugging under either ethernet or modem. Device Manegr sees my phone and I get the RSA key. I never get a terminal which let's me know something isn't right. This is truly weird but I won't give up. I'll start over and see what happens. Again, thanks for your patience.
scooterd said:
Yes it is a Verizon VS985. I bought it last week. I have four options, charge, MTP, internet and PTP when I connect my phone to the PC. I get usb debugging under either ethernet or modem. Device Manegr sees my phone and I get the RSA key. I never get a terminal which let's me know something isn't right. This is truly weird but I won't give up. I'll start over and see what happens. Again, thanks for your patience.
Click to expand...
Click to collapse
No problem at all, happy to help! It sounds like you have everything set up properly, however the terminal doesn't open automatically (you need to do it manually). But you shouldn't need to open the terminal to get ioroot to work, after you've unzipped the ioroot.zip file, simply navigate to the ioroot folder, right-click on ioroot.bat and choose Run as Administrator. That should run through the entire process for you.
If you want to test your adb connection (testing not required for ioroot to work) you'll need to open the command prompt manually. Press Windows Key+R, in the run window, type cmd and press enter, this will open the command prompt. When you're in the command prompt, you'll need to change directory to the location of adb.exe in the bts folder inside the ioroot folder. Mine was in a folder named android on my C drive so the address looked something like this: C:\android\ioroot\bts the command you'll type in command prompt would be: cd C:\android\ioroot\bts then press enter. Then you can type adb devices and see if you're connected properly.
Okay. Here's where we are. I did everything you suggested. I got the RSA key and the G3 went into recovery mode. I toggeld down to the appropriate command and hit the power button. The little green guy fell over with the dreaded red triange and I got the message "This version of ioroot does not support your device/firmware combo. Please downgrade to previously supported software version. My G3 is running VS98510B. I can't post in the devlopment section but wonder if a software update prevents root the the version being used. Just a question but at least I know I'm not going crazy.
---------- Post added at 04:33 PM ---------- Previous post was at 03:46 PM ----------
scooterd said:
Okay. Here's where we are. I did everything you suggested. I got the RSA key and the G3 went into recovery mode. I toggeld down to the appropriate command and hit the power button. The little green guy fell over with the dreaded red triange and I got the message "This version of ioroot does not support your device/firmware combo. Please downgrade to previously supported software version. My G3 is running VS98510B. I can't post in the devlopment section but wonder if a software update prevents root the the version being used. Just a question but at least I know I'm not going crazy.
Click to expand...
Click to collapse
You sir are a genious. After changing my USB cord, I'm rooted and all is well in the world. It's always the little things that matter
My Pleasure! It's the little things that matter and the little things that kill!! I'm glad you're finally victorious!:laugh:
EDIT: Nevermind, I got it to work through Internet>Ethernet.
postal302 said:
Is your phone a Verizon Model (VS985)? I'm assuming not because I don't have PTP mode on my G3. If it's not Verizon, the ioroot method suggests using PTP mode.
Click to expand...
Click to collapse
Hi, hope this thread is somewhat still alive. sorry for the late add on... please help.
Sorry I'm a complete moron when it comes to rooting and ADB / RSA stuff and have no idea what exactly i am doing but for some reason my macbook won't allow me to authorize my oneplus. the authorize computer dialog box never pops up however i get a notification when my phone is plugged in that debugging is active. developer options have been reset, multiple usb cables have been used, and authorization has been revoked multiple times as well.
Im not sure how to access my adb settings on mac and when i attempt to go into terminal and try kill-server / start-server commands i get error messages as commands are not recognized.
Any help is appreciated as i can no longer use stock rom on OPO and i can't go about rooting my device
Wrong forum area -- this is for the Verizon LG G3 smartphone.
Same here! WITH NEXUS 7
Tried all the methods and spent almost 20hrs experimenting to retrieve rsa fingerprint, but in vain
Can you please suggest any remedy?
I cant install any os and unfortunately, my status bar and softkeys disappeared after using softkeyz apk...Dont tell to delete dalvaik data and cache[ it didnt work]
Please...
Jesusmaryqueen said:
Tried all the methods and spent almost 20hrs experimenting to retrieve rsa fingerprint, but in vain
Can you please suggest any remedy?
I cant install any os and unfortunately, my status bar and softkeys disappeared after using softkeyz apk...Dont tell to delete dalvaik data and cache[ it didnt work]
Please...
Click to expand...
Click to collapse
It is also possible to overcome the situation, by installing Mobilego software on your PC and follow the instructions accordingly (connecting your android using usb & debugging etc,.). You will get a RSA fingerprint request.. Easy Once it's done, u can close the mobilego software in the PC and open someother software for example Bacon root toolkit for oneplus one etc etc.. Hope this helps
adbkey doesn't exist
I don't know what i did wrong before, but my computer just DOES NOT have adbkey and adbkey.pub anywhere! First, i thought it was my phone's fault. Then, i tested in a different pc, and it worked. How do i generate those keys? There are no helpful answers in the internet yet...
Despite many tutorials I am still not able to connect to my HTC Desire X (unlocked, S-ON, HBoot 1.25.002) for executing the fastboot-cmd.
I am not on USB3, tried different USB-ports, tried to install the Google USB driver (v11) manually - but still no luck. In bootloader the message 'FASTBOOT USB' is visible and highlighted. In Windows the device has a yellow exclamationmark (unknown device), category 'USB serial bus controllers'. It used to work fine, on the same computer. Updating to Windows 8.1 could be a cause. If my phone is in normal mode and connected to the PC I am able to drag files to and from the phone. ADB is working also, 'ADB devices' shows my phone.
What can I do more to recognize the phone for executing fastboot? Or is something else needed to do? Thx!
I can't give you link right now but use the search there was a way to use fastboot under windows 8.
Ps:
Try this https://cloud.mail.ru/public/e0429e9c057f/usb_driver_r08-windows.zip
Thx for your reply, still no luck :crying: I have searched more and more and problem solved :highfive:
This thread (click on link to view) helped me the most and has the files which are needed. The suggested KB-solution didn't work so use the old-dirty trick (and USB.zip) which is inside the thread mentioned. After executing the batch-file you probably still need to copy the files manually.
"As you all may now, Microsoft pushed the new driver stack in Windows 8.1 so ALL (not only USB 3.0) devices must provide a BOS descriptor. Sony ADB and Fastboot doesn't, so Windows fails to enumerate the device which is reported in Device Manager as error code 43. This also may help if you have a USB drive or mouse and it stopped working after you upgraded from Windows 8 to Windows 8.1."
"It's not any kind of magic - it just replaces Windows 8.1's usbhub.sys and usbport.sys with Windows 8's ones. Old files don't check for BOS descriptor so Fastboot can work."
Also just having the very same issue, haha its extremely frustrating. got adb to work when phones on but not when off
Might have just killed my usb ports
thank god for backups
Inside the mentioned thread are some solutions, i.e. #44
Just use the command: "sfc /scannow" from an elevated command prompt... the original usb drivers will be restored.
Or rename the .bak files of the two copied files to the original ones?
RuudM said:
Inside the mentioned thread are some solutions, i.e. #44
Just use the command: "sfc /scannow" from an elevated command prompt... the original usb drivers will be restored.
Or rename the .bak files of the two copied files to the original ones?
Click to expand...
Click to collapse
Luckily I had a backup, hmm still no drivers work might have to downgrade windows8.0
Going to leave this in case someone is still having this problem:
http://forum.xda-developers.com/htc-one-s/general/guide-fix-fastboot-windows-8-1-t2858337
And if you don't have the drivers AND don't want to install HTC Sync Manager:
http://forum.xda-developers.com/showthread.php?t=2222501
Hey guys.
I have Samsung galaxy ace 5839i (stock for 5830i) and I am using it for a few years, but this problem came for the first time.
Always, when I try to connect my mobile to pc using cable, it just won't connect, it won't even show me the notification of connecting.
Before this problem, I connected it to fedora linux and it was succesful, but now? It won't show me that USB sign even in windows.
Any help?
Thanks in advance
@LiQuDiAk, basically s5839i and s5830 i are identical in many areas ,, few questions though,, did you root your device or you are on android 2.3.6 stock version / kernel 2.6.35.7 ?
when you are in your windows device manager ( while you are connected , do you see any exclamation / question marks in front of the corresponding driver), you can always uninstall your old driver, reboot , then try compiled driver in attachment , and reboot to take proper effect in your registry (tested on win xp/7 -32bit) . Also check your device settings>Application>Development > USB Debugging and make sure the option is checked. now lets check your debugging mode through ADB command and see if your device is being recognized. download platform zip attachment, unzip it and put the folder someplace like your desktop. Now open your command prompt (cmd) through whatever means you are comfortable and change directory (cd) to the unzip folder or simply open your folder and drag/drop adb.exe into your CMD to be in the right place very fast. Then type "adb devices" without quotation marks and report for more troubleshooting .Assuming your Samsung cable is not faulty of course.
@ehsanotaku Yes i did root my phone on pheonix fire rom. No i do not see any. And debugging is checked, that was my first guess why it was causing this. I was checking, whether my device is recognized in linux (only available OS in present) and it was NOT, but the cable is not faulty, because it was charging my phone... but i will do recognize process on windows, hope it will get better. But thanks so far!
so, the driver didnt help, but the adb devices got me something long which i do not completely understand (i am a girl and not IT) so...
LiQuDiAk said:
so, the driver didnt help, but the adb devices got me something long which i do not completely understand (i am a girl and not IT) so...
Click to expand...
Click to collapse
off topic though, gender discrimination is prejudice,, sorry if you are offended . Learning from each other despite your gender,does not undermine your knowledge EVER mate You might find it hard to believe, but I am quite novice in android stuff myself ( learning a great deal from some female members though ).
Back to topic at hand now,,,So let Perfectly Clear take away the time-consuming tasks and fix some stuff ..1. so you can not access your sdcard's content from either systems,, even if you try some live bootable Ubuntu disk/flash into your system and boot it up,, you can't access the mount drive content , right?
2. screenshot of your device manger while you are connected always help mate
3. those long streams of numbers and words is supposed to be your device name , it means your device is communicating with your pc ( /sdcard/ should not be corrupted). You can push (copy ) some vital files to your device with following command :
again same path >> put some file into your desktop (drag/drop to cmd)
i.e: "adb push C:\Users\ehsanotaku\Desktop\test.txt /sdcard/"
back to your device and check root of your files with whatever file explorer you got to approve the theory
4. forgot to ask , just to be on the safe side your device is not in boot loop process, stuck on samsung splash screen or something like that, right?
okay, thanks!
1. I cannot access it trough USB to mobile way, but from SD card adapter, yeah I can (it is just the weird feeling, when you always have to put out your sd and do it that way, i would like to sort this out)
2. http://s1.postimg.org/nkta50u3x/Untitleddas.png I suppose the unknown device is my phone.
3. Just a question, my phone is not connected, i cannot access it and this doesn't help
4. Nope, it is working, i can access everything, just this connecting problem i have. anything else is running smoothly.
Let's say any of this will work, do you think flashing a stock rom will help? I am not sure, if this is problem of rom or not, so...
And maybe i wasn't clear (my bad if not) but when i plug the cable in my device and pc, pc will make this sound of new device found, but it wont show me anything, so my phone. It will charge, but it wont connect, it is behaving like it is on a charger and not connected to the phone.
@LiQuDiAk, Hasty actions are done in a hurry, sometimes without the necessary care or thought. Now let's not leap to any conclusion about your Android custom Rom and flashing back to stock. lets focus on your first most obvious problems,which is driver related.
You didn't declare your flavor of windows: i.e: Windows x86 based-PC;professional 7
Not so sure of your OS Name/Version and System Type, search "system information" in your search box.
Your task manger depicted ACPI x64 ( 64-bit system, no wonder previous 32-bit compatible didn't work out for you ).
Symptoms observed so far:
1. USB cable only charges ( remember your USB cable data line might be the culprit. Just in case of only charging,checking with another set recommended. Your USB port might be problem, some dirt or faulty data line, checking with another USP port doesn't heart though.
2. Windows recognizes something more (like in your case, struggling to find proper corresponding driver), but cannot see it as a Samsung android device (cannot allocate the installed USB drivers to the device).
-If you got Kies (Samsung proprietary software) installed on your PC, delete it with a descent uninstaller program such as CCleaner free version .Kies might cause driver conflict , use it as only last resort , if all drivers failed to communicate with s5830i device.
-Also Uninstall your previous given driver same way, now restart , back to system and grab set of universal Samsung Drivers from attachment .
3.Can't see your "USB connected" in Android notification bar, so you cant click on it and mount your storage data part while you are connected to your PC.
-Normally, when you plug in your Android device, Windows will recognize it as an MTP (Media Transfer Protocol) device and quietly mount it.
However, if you’ve ever attempted to unlock your device such as to install a new ROM or root it, then such miss behaviors might be expected occasionally .
Before i go for more troubleshooting , please provide a full screenshot from your "About Phone" page in your settings . I am quite curious about this phoenix Rom you have mentioned though . I am quite familiar with at least dozen of discontinued/ported projects, but never heard of such ported Rom from other models into s5830i .
Couple of solutions :
Navigate to your settings,Storage and touch the upper-right corner for the “USB computer connection” options, if you have this part available.
make sure “Media device (MTP)” is selected. ( if you have USB Utilities section or whatever added section in your custom settings go there . Selecting that will do the trick. If it does not, then you likely have a driver problem.
Open your device manager, Right click on your unrecognized device in question,choose update driver software, choose Browse my computer,find it through given x64 drivers in your package ,Restart. ( After a successful installation, restart your PC, you must have something like the picture in attachment ) .
Problem was not resolved, Uncheck your debugging option,power off your phone. Now hold Volume(+) + Home + Power for a couple of seconds simultaneously to get to your Samsung Recovery or your Clockwork Recovery, choose Reboot( might be some process/service in your background, which interfere with your Auto USB connected feature of your device. See if the problem is being resolved .
Problems have been persisting, we might need to format your SD card, but before that, insert it into your card reader, in your file explorer window choose Tools>Folder options>select view tab> tick your select hidden file.folders. Now copy all of your SD card's contents into some folder, safe inside your PC.
We can format your card through your clockwork mod recovery console, or some partition tools such as free mini partition wizard,,
problem still persist? let me know
Hey
After some rest with this, my mobile got it solved (dunno why, just once tried to do it and it works.)
So, thank you very much with your answers!!!!
And about that screenshots, I will PM you
But, really, thanks a lot, mate!!!!