Related
Hi all,
I am trying to flash another JB rom the other day.
I just turned off the Prime completely, and try to enter the recovery mode by holding power and down, then up within 5 seconds...
It then showed the Android laying down with the heart opened:silly:
I have to holding power to restart and boot normally into the rom.
I didn't do any wipe or flashing at all...
Later, I restart and now totally stuck on the splash screen with "ASUS", not even able to boot in to the rom I'm currently using...
Any help?!
Thanks
We need more information. What ROM were you using before this happened, what ROM did you try to flash, and is your device unlocked?
McJesus15 said:
We need more information. What ROM were you using before this happened, what ROM did you try to flash, and is your device unlocked?
Click to expand...
Click to collapse
He has to be unlocked otherwise he wouldn't have had a different rom on there or recovery before.
Hold down the power button and volume down button for 10 seconds, keep holding them until the screen with all the icons on it appear (recovery, wipe, usb icon etc) look up the top at the writing and at the end of the line with bootloader in it is a long number that starts with 9 or a 10. What number is it ?
flumpster said:
He has to be unlocked otherwise he wouldn't have had a different rom on there or recovery before.
Click to expand...
Click to collapse
Considering he says he got Dead Andy that makes it possible that he was on stock and just tried to use stock recovery to flash a custom ROM. I understand your point, the OP is just lacking details.
McJesus15 said:
We need more information. What ROM were you using before this happened, what ROM did you try to flash, and is your device unlocked?
Click to expand...
Click to collapse
Hi McJesus, before this happened, I was using this
http://forum.xda-developers.com/showthread.php?t=1911024
and I am trying to shift to shis one
http://forum.xda-developers.com/showthread.php?t=1982156
I was trying to enter the recovery mode to prepare wipe and flash procesure, I remember I used to use TWRP, but failed, it stopped at the "dead Android" icon, and I could get out only by restarting.
Then I researched and installed Goo and Rom manager, yet, just installed those, not done any flashing or wipe whatsoever.
Then start doing recovery mode, failed, normal boot, totally hanged, on the splash screen with "Asus"...I coudle restart with holding the power buttom though.
The device is unlocked.
Thanks for helping,
flumpster said:
He has to be unlocked otherwise he wouldn't have had a different rom on there or recovery before.
Hold down the power button and volume down button for 10 seconds, keep holding them until the screen with all the icons on it appear (recovery, wipe, usb icon etc) look up the top at the writing and at the end of the line with bootloader in it is a long number that starts with 9 or a 10. What number is it ?
Click to expand...
Click to collapse
I was able to get to the screen that you mentioned about...But after that I normal restarted and attempted entering recovery, totally failed and only made to the splash screen.:silly:
Thanks,
garykwan said:
I was able to get to the screen that you mentioned about...But after could normal restart and attepmted recovery entering, now totally failed but to the splash screen.:silly:
Thanks,
Click to expand...
Click to collapse
It looks like you was on the Jellybean bootloader before.. I'm out and about at the moment but if someone hasn't helped you by later I will knock up some instructions for you to try.
flumpster said:
It looks like you was on the Jellybean bootloader before.. I'm out and about at the moment but if someone hasn't helped you by later I will knock up some instructions for you to try.
Click to expand...
Click to collapse
Yes, I believed so.
Thank you so much for your kindly help.:good:
Hello,
Last night I downloaded (from xda), and installed CM 10.1 on CWM 5.8.3.4...all seemed to go well, until I rebooted the system. Now my prime will not boot past the Eee Pad screen..I think it is because I didn't have a JB BL? But, I don't know how to get a JB BL.
I re-downloaded CM 9.1, and put it on m Micro SD card from my NOTE 2, but the Prime won't recognize the external SD in CWM.
How can I fix this?
Also, my PC will NOT recognize my prime at all, it doesn't even show up in the device manager...so I can do adb.
thanks!
no help
Can you get into fastboot?
Have you done nvflash?
Sent from my LT30p using Tapatalk 2
qery said:
Can you get into fastboot?
Have you done nvflash?
Sent from my LT30p using Tapatalk 2
Click to expand...
Click to collapse
i cant get into anything that has to use the computer because my tablet isnt even recognized in the device manager, ive tried different usb ports too.
i have not done nvflash, as i am not sure what that is.
cms062407 said:
i cant get into anything that has to use the computer because my tablet isnt even recognized in the device manager, ive tried different usb ports too.
i have not done nvflash, as i am not sure what that is.
Click to expand...
Click to collapse
You need access to fastboot and this is an easy fix.
Either try your prime in a different computer and see if you can get it to show up or it is possible that your cable is faulty and will need to get a new one off ebay.
flumpster said:
You need access to fastboot and this is an easy fix.
Either try your prime in a different computer and see if you can get it to show up or it is possible that your cable is faulty and will need to get a new one off ebay.
Click to expand...
Click to collapse
okay, ill try a new cable...i have one from my tf700t that i could try.
but, will the prime still be recognized by the pc even if i dont boot fully into the os on the prime? (since i cant boot into it right now)
cms062407 said:
okay, ill try a new cable...i have one from my tf700t that i could try.
but, will the prime still be recognized by the pc even if i dont boot fully into the os on the prime? (since i cant boot into it right now)
Click to expand...
Click to collapse
Hold down power button and volume down for 10-15 seconds until you get to the screen where there are icons on it (wipe, usb icon etc)
Use volume down to go to the usb icon and then press volume up. It will say entering fastboot mode and freeze on your screen. This is normal and you are in fastboot mode. Now go to device manager and see if you have any devices there.
flumpster said:
Hold down power button and volume down for 10-15 seconds until you get to the screen where there are icons on it (wipe, usb icon etc)
Use volume down to go to the usb icon and then press volume up. It will say entering fastboot mode and freeze on your screen. This is normal and you are in fastboot mode. Now go to device manager and see if you have any devices there.
Click to expand...
Click to collapse
lol, well, that worked. in m device manager it says "ASUS Android Bootloader Interface"
flumpster said:
Hold down power button and volume down for 10-15 seconds until you get to the screen where there are icons on it (wipe, usb icon etc)
Use volume down to go to the usb icon and then press volume up. It will say entering fastboot mode and freeze on your screen. This is normal and you are in fastboot mode. Now go to device manager and see if you have any devices there.
Click to expand...
Click to collapse
I just installed CWM Touch 5.8.1.8..now what must I do to get an OS back on here?
Thanks for your help too.....I never thought to try a new cord because the cord charged the prime fine...i figured it if the cord was bad it wouldn't even charge
cms062407 said:
I just installed CWM Touch 5.8.1.8..now what must I do to get an OS back on here?
Thanks for your help too.....I never thought to try a new cord because the cord charged the prime fine...i figured it if the cord was bad it wouldn't even charge
Click to expand...
Click to collapse
Personally I wouldn't even use cwm on the prime. Can you please tell me what the numbers are up the top of the screen when you get to the screen with the icons. It will either start with a 9 or a 10. Also tell me where your nvidia logo is. Bottom center or bottom right when you turn it on.
flumpster said:
Personally I wouldn't even use cwm on the prime. Can you please tell me what the numbers are up the top of the screen when you get to the screen with the icons. It will either start with a 9 or a 10. Also tell me where your nvidia logo is. Bottom center or bottom right when you turn it on.
Click to expand...
Click to collapse
what should I use? TWRP, or w/e its called haha...ill use either one, doesn't matter to me.
NVIDIA logo is bottom center
i have nothing on the device now...I wiped it clean...I actually got rid of CWM too..the only thing I can boot into is the bootloader now (with the USB symbol and WIPE DATA symbol)
cms062407 said:
what should I use? TWRP, or w/e its called haha...ill use either one, doesn't matter to me.
NVIDIA logo is bottom center
i have nothing on the device now...I wiped it clean...I actually got rid of CWM too..the only thing I can boot into is the bootloader now (with the USB symbol and WIPE DATA symbol)
Click to expand...
Click to collapse
You are on the ics bootloader at mo. Please take a look at this post. http://forum.xda-developers.com/showpost.php?p=35419142&postcount=5
That will get you up to jellybean bootloader and jellybean twrp. Make sure if you flash Cyanogenmod afterwards you flash one based on jellybean bootloader. I don't think the official cm is on jb bootloader yet but the unofficial one is.
flumpster said:
You are on the ics bootloader at mo. Please take a look at this post. http://forum.xda-developers.com/showpost.php?p=35419142&postcount=5
That will get you up to jellybean bootloader and jellybean twrp. Make sure if you flash Cyanogenmod afterwards you flash one based on jellybean bootloader. I don't think the official cm is on jb bootloader yet but the unofficial one is.
Click to expand...
Click to collapse
Okay, I am flashing the ICS TWRP...it seems like it may be "stuck" on the .bat file..it is just saying.... sending 'recover' (6340 kb)..it has been like this for 5 ish minutes now..
also, if it does install..how do I boot into TWRP? same as CWM?
cms062407 said:
Okay, I am flashing the ICS TWRP...it seems like it may be "stuck" on the .bat file..it is just saying.... sending 'recover' (6340 kb)..it has been like this for 5 ish minutes now..
also, if it does install..how do I boot into TWRP? same as CWM?
Click to expand...
Click to collapse
That should only take a few seconds to flash. Once it works correctly you would go in the same way as CWM.
I don't like the fact that it has stuck mid flash tho.
flumpster said:
That should only take a few seconds to flash. Once it works correctly you would go in the same way as CWM.
I don't like the fact that it has stuck mid flash tho.
Click to expand...
Click to collapse
just re-flashed...it flashed it...and rebooted it..but TWRM didn't start up...it is still at the Eee Pad screen....
cms062407 said:
just re-flashed...it flashed it...and rebooted it..but TWRM didn't start up...it is still at the Eee Pad screen....
Click to expand...
Click to collapse
It wouldn't go straight in. You would need to hold power and volume down and go in the way you would before.
there are also no numbers or anything up top when I re-boot..if I hold down power and vol- it goes straight into bootloader..no option to get into TWRP.
cms062407 said:
there are also no numbers or anything up top when I re-boot..if I hold down power and vol- it goes straight into bootloader..no option to get into TWRP.
Click to expand...
Click to collapse
What do you mean straight into bootloader? Do you mean where the icons are?
If so click the first one. Rck or something.
flumpster said:
What do you mean straight into bootloader? Do you mean where the icons are?
If so click the first one. Rck or something.
Click to expand...
Click to collapse
ya, it boots into the fast boot place....there are two icons...one is WIPE DATA and the other is the USB icon.
cms062407 said:
ya, it boots into the fast boot place....there are two icons...one is WIPE DATA and the other is the USB icon.
Click to expand...
Click to collapse
This isn't making much sense at the moment. The old way used to be to hold power and volume down and you would get a message saying press volume up within 5 seconds to get into recovery. The new way became that you had an icon in the same place as fastboot and wipe data that said rck and you would press up on that to get into recovery.
You are not even getting the press up to enter recovery any more before getting to the 2 icons ? I'm still a little bit worried about this flash failing earlier.
I'm in a bind, I flashed wrong kernel on my s-off original hboot shows NOTHING. Complete black screen although its fully booted cuz I can feel haptic feedback when i press the back button. Problem is my power button is not working properly, it has a short so I cant hold the power + vol down to get to bootloader. Is there anything else I can do to (excluding use of holding the power button) get back to twrp while its booted in this state?
banccalif said:
I'm in a bind, I flashed wrong kernel on my s-off original hboot shows NOTHING. Complete black screen although its fully booted cuz I can feel haptic feedback when i press the back button. Problem is my power button is not working properly, it has a short so I cant hold the power + vol down to get to bootloader. Is there anything else I can do to (excluding use of holding the power button) get back to twrp while its booted in this state?
Click to expand...
Click to collapse
i would split the phone case and see if you can get to where the power button touches the micro switch. or use adb reboot-bootloader
Evolutionmods said:
i would split the phone case and see if you can get to where the power button touches the micro switch. or use adb reboot-bootloader
Click to expand...
Click to collapse
how can I use adb reboot boot loader or reboot recovery? Im using a mac & all instructions Im finding are for windows
[email protected] hit me up on gtalk ill try to get you through it if you cant get it http://forum.xda-developers.com/showthread.php?t=1917237
Evolutionmods said:
[email protected] hit me up on gtalk ill try to get you through it if you cant get it http://forum.xda-developers.com/showthread.php?t=1917237
Click to expand...
Click to collapse
That link was all I needed, thanks! Got it working!
banccalif said:
That link was all I needed, thanks! Got it working!
Click to expand...
Click to collapse
nice! good job bud, just keep ADB and Fastboot on your comp. it really comes in handy
Anyone's help would be FANTASTIC!
I downloaded and installed LiquidSmooth 2.6.5 on 06/15/13 wiped everything necessary, went to reboot and it said i wasnt rooted would i like to install SuperSU, i installed it and it rebooted to a black screen and wont go any further. all it does is vibrate every couple of seconds. Is there ANYTHING i can do to get back into TWRP recovery? stock recovery? flash the stock image with Odin? it wont boot into TWRP, or download mode.
Please help, might have bricked my hard earned Verizon S4
Hi,
I've recently just installed the TeamWin Recovery Project.
my Verizon Samsung Galaxy S4 has been rooted, and I even checked with some application on the Google Play market, and it has indicated that it indeed was rooted.
But I still kept on getting the annoying "some application need attention blah blah blah..." in the notification bar, and when I click it it gave me options reboot now or reboot later.
Of course I clicked "reboot now" and after a while, I messed up on my cyananogen mod I guess and I recovered using TWRP through a back up that I have already made prior to flashing the CM 10.1. And it was working normally.
Then I some how went to the TWRP again and it said that my phone wasn't rooted any longer! So I swiped the "root the device now" knob thing and ever since then it has been stuck in the "samsung" screen with the unlocked labeled as "custom" underneath.
Even if I try to do Volume Up + Power + Home button it doesn't send me back to the TWRP screen, rather I see the indication that TWRP has been initiated, but it just crashes and turns my phone off.
When I do Volume down + Power + Home button I can get to the Download mode, but it doesn't seem like my computer can recognize the device.
After the Download page and I push the Volume Up button for the actual download mode on the top left it says
Odin Mode
Product name: SCH-I545
Current Binary: Samsung Official
System Status: Custom
CSB-OEM_Config-LSB: 0x30
Write Protection: Enable"
Click to expand...
Click to collapse
And when I do get to this point my computer does recognize the phone and I know this by hearing the usb connection sound that a computer makes.
How do I get my phone back to factory state so that I can maybe once again trying rooting it again?
Thanks in advance.
and I apologize for so much information even if the rules say that I should be brief as possible, but it felt like the details were needed. (correct me if I'm wrong).
nozzleman_85 said:
Anyone's help would be FANTASTIC!
I downloaded and installed LiquidSmooth 2.6.5 on 06/15/13 wiped everything necessary, went to reboot and it said i wasnt rooted would i like to install SuperSU, i installed it and it rebooted to a black screen and wont go any further. all it does is vibrate every couple of seconds. Is there ANYTHING i can do to get back into TWRP recovery? stock recovery? flash the stock image with Odin? it wont boot into TWRP, or download mode.
Click to expand...
Click to collapse
JKrescent said:
Hi,
I've recently just installed the TeamWin Recovery Project.
my Verizon Samsung Galaxy S4 has been rooted, and I even checked with some application on the Google Play market, and it has indicated that it indeed was rooted.
But I still kept on getting the annoying "some application need attention blah blah blah..." in the notification bar, and when I click it it gave me options reboot now or reboot later.
Of course I clicked "reboot now" and after a while, I messed up on my cyananogen mod I guess and I recovered using TWRP through a back up that I have already made prior to flashing the CM 10.1. And it was working normally.
Then I some how went to the TWRP again and it said that my phone wasn't rooted any longer! So I swiped the "root the device now" knob thing and ever since then it has been stuck in the "samsung" screen with the unlocked labeled as "custom" underneath.
Even if I try to do Volume Up + Power + Home button it doesn't send me back to the TWRP screen, rather I see the indication that TWRP has been initiated, but it just crashes and turns my phone off.
When I do Volume down + Power + Home button I can get to the Download mode, but it doesn't seem like my computer can recognize the device.
After the Download page and I push the Volume Up button for the actual download mode on the top left it says
And when I do get to this point my computer does recognize the phone and I know this by hearing the usb connection sound that a computer makes.
How do I get my phone back to factory state so that I can maybe once again trying rooting it again?
Thanks in advance.
and I apologize for so much information even if the rules say that I should be brief as possible, but it felt like the details were needed. (correct me if I'm wrong).
Click to expand...
Click to collapse
PM's sent
DarkMenace said:
PM's sent
Click to expand...
Click to collapse
I'm having the exact same issue. Just rooted today and then using CWM I formatted and installed liquidsmooth. After rebooting it just vibrates. I tried going into Odin by pressing volume down+up+home+power and it just vibrates. Have I ruined the phone?
brasewel said:
I'm having the exact same issue. Just rooted today and then using CWM I formatted and installed liquidsmooth. After rebooting it just vibrates. I tried going into Odin by pressing volume down+up+home+power and it just vibrates. Have I ruined the phone?
Click to expand...
Click to collapse
If you can get inn to Odin let me know and I can help you.
DarkMenace said:
If you can get inn to Odin let me know and I can help you.
Click to expand...
Click to collapse
I can't get into the download/odin screen. When I press power + home + volume down it just vibrates.
I don't understand how I could have hard-bricked the phone just by formatting.
Just before rebooting, CWM prompted me "saying root access might be lost" and I hit ignore.
brasewel said:
I can't get into the download/odin screen. When I press power + home + volume down it just vibrates.
I don't understand how I could have hard-bricked the phone just by formatting.
Just before rebooting, CWM prompted me "saying root access might be lost" and I hit ignore.
Click to expand...
Click to collapse
Boot phone into ODIN mode (power off the phone, then press and hold Vol Down + Power then press Vol Up). I think you might have done it wrong.
DarkMenace said:
Boot phone into ODIN mode (power off the phone, then press and hold Vol Down + Power then press Vol Up). I think you might have done it wrong.
Click to expand...
Click to collapse
Thanks DarkMenace, I was doing it wrong. I managed to get into the Downloading... screen
brasewel said:
Thanks DarkMenace, I was doing it wrong. I managed to get into the Downloading... screen
Click to expand...
Click to collapse
PM incoming.
DarkMenace said:
PM incoming.
Click to expand...
Click to collapse
Thanks DarkMenace. I was able to restore my phone. For some weird reason it refused to go in Odin mode if I didn't have a USB cable plugged in.
I used the stock image, just wondering if I'm still rooted?
brasewel said:
Thanks DarkMenace. I was able to restore my phone. For some weird reason it refused to go in Odin mode if I didn't have a USB cable plugged in.
I used the stock image, just wondering if I'm still rooted?
Click to expand...
Click to collapse
If you use a Stock Image you lose root and have to do it gain.
What is the fix?
DarkMenace said:
If you use a Stock Image you lose root and have to do it gain.
Click to expand...
Click to collapse
I have the same issue after flashing Liquid-JB-v2.5-OFFICIAL-d2vzw yesterday 6/19/13. Wiped everything, factory reset, hit reboot, it said my device appeared not to be rooted and asked if i would like to install SuperSU. I said yes to install it. When my device rebooted, I got a black screen and my phone won't go any further. It just vibrates, every 2 or 3 seconds. I can get it into download mode. I tried to flash the stock firmware back onto it but when it reboots after, it goes back to black screen and vibrate. Thanks.
koolpapa said:
I have the same issue after flashing Liquid-JB-v2.5-OFFICIAL-d2vzw yesterday 6/19/13. Wiped everything, factory reset, hit reboot, it said my device appeared not to be rooted and asked if i would like to install SuperSU. I said yes to install it. When my device rebooted, I got a black screen and my phone won't go any further. It just vibrates, every 2 or 3 seconds. I can get it into download mode. I tried to flash the stock firmware back onto it but when it reboots after, it goes back to black screen and vibrate. Thanks.
Click to expand...
Click to collapse
PM Sent.
DarkMenace said:
PM Sent.
Click to expand...
Click to collapse
I'm back up and running. Thank you for the guidance.
DarkMenace said:
PM Sent.
Click to expand...
Click to collapse
Just curious on something.... Not trying to be a jerk. Why are you sending pm's instead of replying in the thread? If your pm is helping this person I'm sure it could help many people if it was in the thread. Unless your a Verizon employee with secret unbricking files or something
Sent from my SCH-I545 using xda premium
Ryno77 said:
Just curious on something.... Not trying to be a jerk. Why are you sending pm's instead of replying in the thread? If your pm is helping this person I'm sure it could help many people if it was in the thread. Unless your a Verizon employee with secret unbricking files or something
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
Responded to you via PM as to not start any issues here.
I am in a similar situation, I am able to get into Odin mode, though my model number is SCG-I545 if that makes a difference.
averJOE said:
I am in a similar situation, I am able to get into Odin mode, though my model number is SCG-I545 if that makes a difference.
Click to expand...
Click to collapse
PM sent
Sent from my Rooted Verizon Samsung Galaxy S4 using xda premium
Ryno77 said:
Just curious on something.... Not trying to be a jerk. Why are you sending pm's instead of replying in the thread? If your pm is helping this person I'm sure it could help many people if it was in the thread. Unless your a Verizon employee with secret unbricking files or something
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
:laugh: thats a good one, I agree, PM is ok, but it could help people here that run into that issue.
TheAxman said:
:laugh: thats a good one, I agree, PM is ok, but it could help people here that run into that issue.
Click to expand...
Click to collapse
It could but there are other reasons for the PMs.
Sent from my Rooted Verizon Samsung Galaxy S4 using xda premium
I installed no name rom and im getting a system UI has stopped working and i could never manually enter twrp I had to use an app to boot into recovery every time. Any advice on what to do
Manually
Power Off
Hold Volume Down
Hold Power
When at the LG Screen Let Go of Power for 1 second and then repress power
Go through prompts saying yes to them
Double0EK said:
Manually
Power Off
Hold Volume Down
Hold Power
When at the LG Screen Let Go of Power for 1 second and then repress power
Go through prompts saying yes to them
Click to expand...
Click to collapse
just to be clear, i never let go of the volume down button correct? Ive been holding the Vol down and power button non stop and ive tried releasing both of them and repressing them and i still got nothing, but i havent tried releasing just the power button and repressing it
dillonorden said:
just to be clear, i never let go of the volume down button correct? Ive been holding the Vol down and power button non stop and ive tried releasing both of them and repressing them and i still got nothing, but i havent tried releasing just the power button and repressing it
Click to expand...
Click to collapse
Correct. Do not let go of the Vol Down Button until the white screen ask you if you want to reset. And answer YES to both questions.
Double0EK said:
Manually
Power Off
Hold Volume Down
Hold Power
When at the LG Screen Let Go of Power for 1 second and then repress power
Go through prompts saying yes to them
Click to expand...
Click to collapse
Double0EK said:
Correct. Do not let go of the Vol Down Button until the white screen ask you if you want to reset. And answer YES to both questions.
Click to expand...
Click to collapse
now will this get me into TWRP so i can restore my back up or is it going to do something else? Im at work atm so im trying to get a full understanding of this process so i know what im doing when i get home. Wife and 2 kids keep me busy so i need to do this quick and efficiently lol
dillonorden said:
now will this get me into TWRP so i can restore my back up or is it going to do something else? Im at work atm so im trying to get a full understanding of this process so i know what im doing when i get home. Wife and 2 kids keep me busy so i need to do this quick and efficiently lol
Click to expand...
Click to collapse
IF you do have TWRP installed it will take you to it. If you dont then ... Good luck.
You can always download Terminal Emulator
Type in
Code:
su
Press Enter
Code:
reboot recovery
Press Enter
Instead of Terminal Emulator, You can download G-Script Lite.
Its basically just like Terminal Emulator but you can save commands like reboot recovery.
Its the only thing I really use it for since my Power Menu doesnt have the option yet.
Double0EK said:
Instead of Terminal Emulator, You can download G-Script Lite.
Its basically just like Terminal Emulator but you can save commands like reboot recovery.
Its the only thing I really use it for since my Power Menu doesnt have the option yet.
Click to expand...
Click to collapse
I cant use my device at all. When it boots up i get system UI stopped working repetitively. I can boot into download mode and fastboot mode. i had TWRP installed and had no name rom running and booted into TWRP then did a data, dalvik and cache wipe and started getting this issue so i believe TWRP is still installed. Im running windows 10 and the LG Flashtool stops working while trying to read the phone information
dillonorden said:
I cant use my device at all. When it boots up i get system UI stopped working repetitively. I can boot into download mode and fastboot mode. i had TWRP installed and had no name rom running and booted into TWRP then did a data, dalvik and cache wipe and started getting this issue so i believe TWRP is still installed. Im running windows 10 and the LG Flashtool stops working while trying to read the phone information
Click to expand...
Click to collapse
Oh. Damn well then use the Vol and Power to do get into recovery. Hopefully TWRP is still there. Good Luck
Double0EK said:
Oh. Damn well then use the Vol and Power to do get into recovery. Hopefully TWRP is still there. Good Luck
Click to expand...
Click to collapse
Just wanted to tell you thanks for your time. My device is up and running again. Id hit the thanks button but idk how to it on the app
Sent from my LG-H901 using XDA-Developers mobile app