I bought this tab but there were few probs int he tab i called customer support they told me to reinstall the fw and the instructions were like this
"1) Turn-off the tablet.
2) Press and hold the 'Volume +' button and connect the USB cable to the tablet and to your desktop/laptop. Now press the power button 10 times continually.
3) PC will show a message "Found new hardware". The drivers have to be installed manually. The drivers are located in the "Drivers" folder.
5) Run "AX01-tool.exe" located in the "Update Tool" folder and follow the procedures. When prompted to select the image file, select the file "AX01-20120615.img" located in the "Image" folder.
6) Once the initial setup wizard is complete. Disconnect the USB cable and reconnect to the tablet.
7) The PC will prompt you to confirm the initialization of the upgrade and format, select "YES" to continue. Once confirmed the update process will start.
8) Once the update is completed the tablet will automatically switch to charging mode.
9) Turn on the tablet to complete the finalize the update process. The initial boot will be slow and it will take a few minutes for all the application to get installed.
-> Perform the above process ONLY when your Tablet is connected to charger.
-> Do NOT press Cancel or Disconnect the Tablet from desktop/laptop during the update process."
But im not able to connect the tab lyk that to my pc and im unable to install the usb drivers and from this morning tab is not starting up.....
plz help me...........
thnx for the help guys but i managed it on my own so if anyone needs help about this just let me know i will post the step by step procedure in the forum.........
Help required
danteo7 said:
thnx for the help guys but i managed it on my own so if anyone needs help about this just let me know i will post the step by step procedure in the forum.........
Click to expand...
Click to collapse
Hi Mate,
Please let me know the steps to re-apply the firmware ..
I am having the auxus ax01 and would like to reinstall the firmware.. I feel the touch screen is not very responsive / giving me false clicks
help
Dear ,
For connecting the tablet to your desktop ,you canuse (pdanet desktop).just google it and download it.you can also use it for rooting purpose.
And also please provide the link from where you downloaded this firmware file,please,because my ax01 just stuck on booting,due to rooting,and they where telling that rooting void the warranty.so please provide me the link as soon as possible.
vnsnair said:
Hi Mate,
Please let me know the steps to re-apply the firmware ..
I am having the auxus ax01 and would like to reinstall the firmware.. I feel the touch screen is not very responsive / giving me false clicks
Click to expand...
Click to collapse
if u hav the files provided by iberry then its gd if u dnt then let me noe i will provide u the link
so after turning off ur tablet u will find a small hole rght nxt to mini hdmi port press and hold it with a use of pin and then connect it with ur pc(while holding the button)
after that install the usb drivers manually and rest u can find up in my post............
Please help
danteo7 said:
if u hav the files provided by iberry then its gd if u dnt then let me noe i will provide u the link
so after turning off ur tablet u will find a small hole rght nxt to mini hdmi port press and hold it with a use of pin and then connect it with ur pc(while holding the button)
after that install the usb drivers manually and rest u can find up in my post............
Click to expand...
Click to collapse
Please dear provide me the firmware file,actually now i know why my tablet ax01 bricked,its due to busybox,not by rooting,so please provide me the link...i will gratefull to you.
kedia_4 said:
Please dear provide me the firmware file,actually now i know why my tablet ax01 bricked,its due to busybox,not by rooting,so please provide me the link...i will gratefull to you.
Click to expand...
Click to collapse
i will pm u as im not allowed to post outside links here...................
Please mail me the link
danteo7 said:
i will pm u as im not allowed to post outside links here...................
Click to expand...
Click to collapse
please send me the link [email protected]
kedia_4 said:
please send me the link [email protected]
Click to expand...
Click to collapse
i hav sent the links on ur mail and even msgd u in the forums.......
Thanks you Dear
danteo7 said:
i hav sent the links on ur mail and even msgd u in the forums.......
Click to expand...
Click to collapse
Thanks Dear,its a great help for me.
If you need any help from my side..i will always,there for you...
kedia_4 said:
Thanks Dear,its a great help for me.
If you need any help from my side..i will always,there for you...
Click to expand...
Click to collapse
thnxx bro :good:
pls send me the link
danteo7 said:
i will pm u as im not allowed to post outside links here...................
Click to expand...
Click to collapse
Hi,
Can u pls send me the link to my gmail ID..
Its same as my ID in the forum (I dont want to type the full email id and make it searchable on the web )
vnsnair said:
Hi,
Can u pls send me the link to my gmail ID..
Its same as my ID in the forum (I dont want to type the full email id and make it searchable on the web )
Click to expand...
Click to collapse
sry but im unable to find ur email .do u want me to pm the link to u in forum???????
pls send me the link
danteo7 said:
sry but im unable to find ur email .do u want me to pm the link to u in forum???????
Click to expand...
Click to collapse
Hi,
My email ID is vnsnair at gmail.com
thanks.
Need AUXUS AX01 Firware link
vnsnair said:
Hi,
My email ID is vnsnair at gmail.com
thanks.
Click to expand...
Click to collapse
Hi,
I have AX01 Tablet. Plz send me the link for update firmware.
My email id is: anielkumar @ gmail.com. plz remove space btw @.
Many thanks.
AK
vnsnair said:
Hi,
My email ID is vnsnair at gmail.com
thanks.
Click to expand...
Click to collapse
i've sent u the link
anielkumar said:
Hi,
I have AX01 Tablet. Plz send me the link for update firmware.
My email id is: anielkumar @ gmail.com. plz remove space btw @.
Many thanks.
AK
Click to expand...
Click to collapse
check ur mail
danteo7 said:
check ur mail
Click to expand...
Click to collapse
Thanks.
This link should be present on iberry asia site.
I don't know , why this link is not there at Support site!
Thank u
update
I have ax01 which has android 4.0.3. I am facing problems with WIFI. :crying:
Please mail me the steps to upgrade the firmware to 4.0.4 or higher. My email is vishaldas [at] inbox[dot]com
vishaldas said:
I have ax01 which has android 4.0.3. I am facing problems with WIFI. :crying:
Please mail me the steps to upgrade the firmware to 4.0.4 or higher. My email is vishaldas [at] inbox[dot]com
Click to expand...
Click to collapse
sry bro but i dnt noe abt that, i only noe how to reinstall the original 4.0.3 firmware..........
Related
Someone should please help me with a mediafire link for flashtool latest version, i cant download cos using free user cant get me tha file cos of its size....
Flashtool 0.8.0.0:- http://uploaded.to/file/pgroxgfl
Flashtool Update:- http://uploaded.to/file/7bvtcupy
Hi,
Just go to rapidrar.com and paste the original hotfile link from flashtool website in the box where it is written " Enter Your Link Here: " and then check the box I have read the Rapidrar Terms of Use, and I agree to be bound by them. and the click Generate Download Link.. then u will get the direct link with resume support..
[ You can generate only one link per day ]
Hope It helps you..,
Aqib
mohdaqib17 said:
Hi,
Just go to rapidrar.com and paste the hotfile link in the box where it is written " Enter Your Link Here: " and then check the box I have read the Rapidrar Terms of Use, and I agree to be bound by them. and the click Generate Download Link.. then u will get the direct link with resume support..
Hope It helps you..,
Aqib
Click to expand...
Click to collapse
Thanks for dis mate... +1
i do use Rapid8.com but misbehaving nowadays..... Lemme try Rapidrar.com!
Error:- You've reached your daily limit.
whalesplaho said:
Thanks for dis mate... +1
i do use Rapid8.com but misbehaving nowadays..... Lemme try Rapidrar.com!
Click to expand...
Click to collapse
My Pleasure !!
whalesplaho said:
Error:- You've reached your daily limit.
Click to expand...
Click to collapse
Try my generated link :
I'm not sure that it will work or not due to different IP address ..
View attachment rapidrar.txt
mohdaqib17 said:
Try my generated link :
I'm not sure that it will work or not due to different IP address ..
View attachment 1100654
Click to expand...
Click to collapse
Thanks for yur time Bhai.....
Error:- IP is not the same.
i dont know if it is allowed to post MF link but here it is..
http://www.mediafire.com/?im2n6vv1qefwx7d
pls. delete mod if it's not allowed
bhovoi said:
i dont know if it is allowed to post MF link but here it is..
http://www.mediafire.com/?im2n6vv1qefwx7d
pls. delete mod if it's not allowed
Click to expand...
Click to collapse
Thanx for the link !! ..
bhovoi said:
i dont know if it is allowed to post MF link but here it is..
http://www.mediafire.com/?im2n6vv1qefwx7d
pls. delete mod if it's not allowed
Click to expand...
Click to collapse
Gracias Buddy.... Am very grateful for dis!!!!
###Pls post Mediafire link for tha Update too.... Please!
flashtool-update-0.8.x-0.8.4.0:-
http://www.mediafire.com/?ayatsdoc6qn2764
This firmware is designed for Huawei TELPAD user's in the Philippines with model S7-931WD
I have manage to stitch the latest Huawei official firmware with Telpad configuration ( Dial Pad, etc..)
I've been using it for a while and I think it's time for me to share it
This firmware is NOT ROOTED and WILL WIPE OUT YOUR DATA
DISCLAIMER: Rooting any Android device or installing a custom ROM firmware will void the warranty of the device and might only be restored by flashing the phone back to stock firmware and uninstalling custom recoveries and such.
I take no responsibility for any malfunctioning or any wrong doing happening to your device(s) by you following this guide. Proceed at your own risk!
Instructions (noob proof!)
1. Dowload the firmware to this LINK use google chrome
2. Unzip it and copy the dload folder to your SD card (you may format your SD card but its not mandatory)
3. Turn of your Tablet and insert your SD card
4. Turn on you Tablet and let it install (it will restart twice)
IMPORTANT!
- DO NOT TURN IT OFF and WAIT!
- Wait for green "OK" ( that means it is successfully installed)
5. Remove your SD card and your tablet will restart (booting will take a while, max will be 10 minutes)
6. Configure your google account (if you have) or just skip it
7. Prompt will show up on the screen that the tablet is upgrading, just wait for it to finish and it will restart it self
8. Your done! Place it to dock and check if dialpad is working!
If you have any questions, just let me know
If you appreciate it , Just Click that THANKS button below ( or else the link will not work! Just kidding! )
Credits
For this great Russian community! LINK
Google for Translation
worstenbrood for his Tool
Thanks bro. I needed this to reset cause people here at home put a password and FORGOT it.
hakkai999 said:
Thanks bro. I needed this to reset cause people here at home put a password and FORGOT it.
Click to expand...
Click to collapse
pogs24ever said:
Click to expand...
Click to collapse
bro .. can you teach me how to enter recovery mode in the new telpad Dual s s7-951wd ... ill already tried volume up + power but it fails and volume down + power is for hard reset ..
eslingsam said:
bro .. can you teach me how to enter recovery mode in the new telpad Dual s s7-951wd ... ill already tried volume up + power but it fails and volume down + power is for hard reset ..
Click to expand...
Click to collapse
I cant... I have s7 lite at the moment... you can got to this page... and ask someone there... Link
pogs24ever said:
I cant... I have s7 lite at the moment... you can got to this page... and ask someone there... Link
Click to expand...
Click to collapse
bro .. page not FOuNd
eslingsam said:
bro .. page not FOuNd
Click to expand...
Click to collapse
Just Search the telpad users group on Facebook
Sent from mobile
pogs24ever said:
Just Search the telpad users group on Facebook
Sent from mobile
Click to expand...
Click to collapse
tapos napo .. salamat po
Telpad dual s
still looking for telpad dual s root thingy, fb group already closed
really tied with 8gb storage for apps @[email protected]
troyholio said:
still looking for telpad dual s root thingy, fb group already closed
really tied with 8gb storage for apps @[email protected]
Click to expand...
Click to collapse
Group is not closed... Rooting guide for your device is still posted on that page
Sent from mobile
My bad
sorry, it was a different group the "telpad dual s" exists, found out they use "vroot", our forum recommended to stay away while they check if its malware free and safe, though it really works, will wait for confirmation still thanks bud!
eslingsam said:
tapos napo .. salamat po
Click to expand...
Click to collapse
Hit the Thanks button !
Sent from mobile
troyholio said:
still looking for telpad dual s root thingy, fb group already closed
really tied with 8gb storage for apps @[email protected]
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=msTenz6rkm4
"Hit Thanks if i Help"
Will this work with S7-961wd, PLDT TelPad?
jahmgwapo said:
Will this work with S7-961wd, PLDT TelPad?
Click to expand...
Click to collapse
Try to read...
Sent from mobile
Different model, but the same unit, Huawei MediaPad 7 Lite.
jahmgwapo said:
Different model, but the same unit, Huawei MediaPad 7 Lite.
Click to expand...
Click to collapse
I dont think so...
Does this work on the s7-932u?
wanna try it
3g will not work..
Sent from mobile
Please can you make a ROM for Huawei Mediapad 7 Lite S7-931U
I have TWRP working and cannot find any ROM for my device.
If you know any ROM for this please give a link or can you make one? :crying:
Oh, and I think this might help, if someone is trying to build a ROM for S7-931u
Need help guys I have accidentally deleted systemui and worse can't connect it to USB I have black screen and cannot receive calls no ROMs so plss suggest me something people of XDA pls rooted android HCl me connect v3 jellybean 4.1.2
RakeshAdy said:
Need help guys I have accidentally deleted systemui and worse can't connect it to USB I have black screen and cannot receive calls no ROMs so plss suggest me something people of XDA pls rooted android HCl me connect v3 jellybean 4.1.2
Click to expand...
Click to collapse
Is your phone booting? When you say black screen, does it not boot at all?
What is your device I'll see if I can help you out. .
yeah bro it boots
lacoursiere18 said:
Is your phone booting? When you say black screen, does it not boot at all?
What is your device I'll see if I can help you out. .
Click to expand...
Click to collapse
Thnx for reply bro I'm running Android 4.1.2 jellybean
HCl me connect v3 tablet no status bar and cannot connect it to PC I feel pissed off now ! no i wont boot at all
RakeshAdy said:
Thnx for reply bro I'm running Android 4.1.2 jellybean
HCl me connect v3 tablet no status bar and cannot connect it to PC I feel pissed off now !
Click to expand...
Click to collapse
boot into recovery?get a hold of systemui.apk for your tablet and push it via adb?
elixir. said:
boot into recovery?get a hold of systemui.apk for your tablet and push it via adb?
Click to expand...
Click to collapse
Yes this ^^.. If you don't have a recovery, then his second option is correct.. The problem though, if you can not get adb access..
Let us know if this works..
but wer do iget tht
lacoursiere18 said:
Yes this ^^.. If you don't have a recovery, then his second option is correct.. The problem though, if you can not get adb access..
Let us know if this works..
Click to expand...
Click to collapse
Yeah current systemui is not der I dint backup now we're do I get those wch support
RakeshAdy said:
Yeah current systemui is not der I dint backup now we're do I get those wch support
Click to expand...
Click to collapse
You need to search the forums to try to find your SystemUI.apk that someone maybe extracted for other purposes... If there are none posted..Then maybe ask someone that has one, that is rooted and they can pull the apk.. Do you have a way of flashing a new firmware.. I did a quick search and saw THESE but not sure if this is your device
lacoursiere18 said:
You need to search the forums to try to find your SystemUI.apk that someone maybe extracted for other purposes... If there are none posted..Then maybe ask someone that has one, that is rooted and they can pull the apk.. Do you have a way of flashing a new firmware.. I did a quick search and saw THESE but not sure if this is your device
Click to expand...
Click to collapse
bro leave gave it service and sold it bought samsung galaxy grand
hello .. is there anybody who can supply the correct 3 tools for flashing the stock rom of canvas HD i.e. sp flash tools, 14 flasher user ROM & especially the drivers. pls. help immediately as i bricked the device recently.
alex279 said:
hello .. is there anybody who can supply the correct 3 tools for flashing the stock rom of canvas HD i.e. sp flash tools, 14 flasher user ROM & especially the drivers. pls. help immediately as i bricked the device recently.
Click to expand...
Click to collapse
all three things can be found at http://www.moulnisky.com
my old friend
edwardpage said:
all three things can be found at http://www.moulnisky.com
Click to expand...
Click to collapse
Hey man i am the one whom you have reviewed recently on the thread"pls. Help to fix swapping issue on canvas HD". Pls. Give the correct drivers which you got after googling on the web & flashed that with your device. Pls. If possible give the link of those sites....
alex279 said:
Hey man i am the one whom you have reviewed recently on the thread"pls. Help to fix swapping issue on canvas HD". Pls. Give the correct drivers which you got after googling on the web & flashed that with your device. Pls. If possible give the link of those sites....
Click to expand...
Click to collapse
http://gsm-panda.blogspot.com/2014/...ml?utm_source=dlvr.it&utm_medium=facebook&m=1
download from here and then install from the folder "new inst win7&8x64"
its empty
edwardpage said:
http://gsm-panda.blogspot.com/2014/...ml?utm_source=dlvr.it&utm_medium=facebook&m=1
download from here and then install from the folder "new inst win7&8x64"
Click to expand...
Click to collapse
there is nothing in the rar folder which i downloaded from the 4shared.com or even using the app too.pls. reply.
alex279 said:
there is nothing in the rar folder which i downloaded from the 4shared.com or even using the app too.pls. reply.
Click to expand...
Click to collapse
there is a link to the drivers in this thread...
http://forum.xda-developers.com/micromax-a116/help/phone-bricked-t2810634
a little help
edwardpage said:
there is a link to the drivers in this thread...
http://forum.xda-developers.com/micromax-a116/help/phone-bricked-t2810634
Click to expand...
Click to collapse
in the post where mr. shivrajsingh post the drivers i dont understand whats the process he is describing at the last portion of that thread, can u pls. describe me when to follow these rules & for what !!!!!!!!!!!
alex279 said:
in the post where mr. shivrajsingh post the drivers i dont understand whats the process he is describing at the last portion of that thread, can u pls. describe me when to follow these rules & for what !!!!!!!!!!!
Click to expand...
Click to collapse
they need not be followed...just install the drivers..and you are good to go..
its still frustrating ....
edwardpage said:
they need not be followed...just install the drivers..and you are good to go..
Click to expand...
Click to collapse
Pls. If possible download the rar file you suggested which is showing 11Kb on my download manager. Iam telling this because there is nothing to install but three file having couple of written things which are opening through note pad(sizes-4kb each). Also i must mention here that i m using a win8 pc. Pls. Man help......
alex279 said:
Pls. If possible download the rar file you suggested which is showing 11Kb on my download manager. Iam telling this because there is nothing to install but three file having couple of written things which are opening through note pad(sizes-4kb each). Also i must mention here that i m using a win8 pc. Pls. Man help......
Click to expand...
Click to collapse
yes it is only 11 kb...u will have to follow the steps in that thread to install these...
or
just Google All mtk drivers and download the setup...it will be approx 14 mb..
edwardpage said:
yes it is only 11 kb...u will have to follow the steps in that thread to install these...
or
just Google All mtk drivers and download the setup...it will be approx 14 mb..
Click to expand...
Click to collapse
The first part is general for flashing in the thread where the driver links was given but i asked what the second part is all about in the previous thread. i dont know which steps to follow to install the drivers pls. dont hesitate & explain me stepwise....i already googled before about this & then start this this thread & install 5-6 drivers{but no one among them is of 14mb} but nothing works pls. if you use that specific one pls. post. Is drivers are windows 8 compatible or not ????? pls. reply man..my device is bricked since 2 long long weeks
alex279 said:
The first part is general for flashing in the thread where the driver links was given but i asked what the second part is all about in the previous thread. i dont know which steps to follow to install the drivers pls. dont hesitate & explain me stepwise....i already googled before about this & then start this this thread & install 5-6 drivers{but no one among them is of 14mb} but nothing works pls. if you use that specific one pls. post. Is drivers are windows 8 compatible or not ????? pls. reply man..my device is bricked since 2 long long weeks
Click to expand...
Click to collapse
I wil giv u a tutorial on how to install the 11kb drivers..
turn off ur device..remove battery and sim cards...now open device manager on ur computer and keep the window open.. connect the phone to the computer...it will appear in the device manager in unknown devices with a yellow question mark...right click on the device and select update driver... select update manually and give the location of the 11kb driver folder...it will update and u r done...
I successfully flashed the v5 stock ROM & as i knew the bug is Windows 8 but now my device is showing A116i & battery % is also abnormal. Pls help if its a weird issue
Sent from my Micromax A116i using XDA Premium 4 mobile app
alex279 said:
I successfully flashed the v5 stock ROM & as i knew the bug is Windows 8 but now my device is showing A116i & battery % is also abnormal. Pls help if its a weird issue
Sent from my Micromax A116i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes the V5 shows model no. as A116i...that is normal...
and abt the battery %age...don't worry...the backup is still the same...
pls suggest me how i can download the correct drivers.
ok...........
[email protected] said:
pls suggest me how i can download the correct drivers.
Click to expand...
Click to collapse
which windows version u r using
i need help with my galaxy mega "i9200" after i install the kitkat rom I9200XXUDNE4 the screen is not working at all even the back and menu button
i tried to install the rom again but it's same thing the screen is not working.
and i can't take the phone to the warranty because the phone it was rooted and it an year and half old
so please help....
I update my phone trouth ota.. And i have same problem.. Help plz
I downgrade to 4.2.2 and now.. My imei and baseband is unknown
solution
blackrose1 said:
I update my phone trouth ota.. And i have same problem.. Help plz
I downgrade to 4.2.2 and now.. My imei and baseband is unknown
Click to expand...
Click to collapse
I have figured this out and made a video on how to fix this issue follow all steps sorry for the poor video quality was my first one lol
edit so im new and xda wont let me post a link email me and ill send the link sorry
androidreviewguy said:
I have figured this out and made a video on how to fix this issue follow all steps sorry for the poor video quality was my first one lol
edit so im new and xda wont let me post a link email me and ill send the link sorry
Click to expand...
Click to collapse
man give us the link many People need it :silly:
sae5xf said:
man give us the link many People need it :silly:
Click to expand...
Click to collapse
youll have to pm me and I can send you link to my videos youll have to subscribe because its a 3 part video or look on youtube for android ROM review central I am to new and it wont let me post links yet
Solved = use this link guys
http://forum.xda-developers.com/showthread.php?t=2922542