Ok, so I was about to install custom ROM to a unrooted SGS2 phone, I didn't have a computer so I decided to root my phone installing cwm.zip through stock recovery and then installing su and busybox via cwm. then I backed everything up, downloaded a custom ROM with a custom kernel and cwm touch recovery with it. I went to stock recovery again and installed cwm.zip to get to cwm recovery and first made a nandroid backup and then installed the custom ROM. It turned off while it was on aroma installer and now it doesn't go on. Is it bricked? is there anything I can do?
Sent from my GT-I9300 using xda app-developers app
is it because I was trying to install a custom ROM through temporary Cwm? any help is appreciated. My girlfriends phone )
Sent from my GT-I9300 using xda app-developers app
If you can get to download mode or recovery then try flashing the from again
Preferably use Odin by getting to download mode
Sent from my GT-I9100 using xda app-developers app
jokerrrrrrr said:
If you can get to download mode or recovery then try flashing the from again
Preferably use Odin by getting to download mode
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I can't get anywhere.. and I assume I can't do anything even if I get it plugged on a computer? if it doesn't go to Odin or stock recovery or no where at all what are my chances? bricked I guess. BTW will anyone at Samsung know that I tried flashing my phone if I take it to be fixed? I mean if it doesn't go on, don't they have to replace everything and they would never even know that i tried to flash it?
Sent from my GT-I9300 using xda app-developers app
You soft-bricked it maybe...
Did you try booting up your phone pressing the POWER + HOME + VOL UP keys? If it boots into recovery, then just do a nandroid restore...
If you're just concerned with bringing the phone back to life... Boot up your phone pressing POWER + HOME + VOL DOWN keys. It will show you a green n' black menu, then press VOL UP. It will then show an Android robot with "downloading" written below. Now just connect it to your PC (I hope you already installed drivers for S2) and start ODIN. (Make sure KIES is off)
Use a .tar.md5 or .tar(or any other format) file(or files depending on your firmware) and put it in the respective box. Leave the tickboxes as they are and DO NOT use a .pit file AND DON'T TICK repartition.
Click start flash and your phone should boot up on the stock ROM again!
Just trying to help you!
Do you camera is hot ? If yes "I THINK IT"S MAYBE HARDBRICK ?"
Can you buy the Usb jig or do it ?
Paulius7 said:
Do you camera is hot ? If yes "I THINK IT"S MAYBE HARDBRICK ?"
Can you buy the Usb jig or do it ?
Click to expand...
Click to collapse
I'm guessing also its hardbrick, don't know what is USB jig? if it is hardbrick, is there anything at all I can do? it doesn't go to Odin or recovery or nowhere, i can't get the screen on at all.
Sent from my GT-I9300 using xda app-developers app
With USB jig Your phone go to Download mode without VOLUME+POWER AND MENU BUTTONS
P.S. Hardbrick is Motherboard damage.(Or maybe you install rom it's not for you galaxy ?)
P.S.S. I haved a CPU damaged so it's not working(I can't boot up it like you) i go to gurante i they fix that.
P.S.S.S. http://forum.xda-developers.com/showthread.php?t=1891197
Paulius7 said:
With USB jig Your phone go to Download mode without VOLUME+POWER AND MENU BUTTONS
P.S. Hardbrick is Motherboard damage.(Or maybe you install rom it's not for you galaxy ?)
P.S.S. I haved a CPU damaged so it's not working(I can't boot up it like you) i go to gurante i they fix that.
P.S.S.S. http://forum.xda-developers.com/showthread.php?t=1891197
Click to expand...
Click to collapse
where can I get a USB jig? I don't know if my motherboard is broken, it doesn't turn on at all, screen stays off what ever I press. and even if a put the charger in. in the evening I will have a computer and I can connect it to my PC but I assume that there is nothing I can do anyways because I can't just turn the phone on. I was trying to install a custom ROM with a temporary CWM recovery. didn't have cwm yet installed but I assumed it will be installed at the same time I install the rom because it included it. so if I have hard bricked my phone and I take it to be repaired, will they see I have tried to flash the phone? will it be fixed with guarantee?
Sent from my GT-I9300 using xda app-developers app
But you Flash rom REALLY FOR YOUR PHONE ? And i think next time you need to root the phone and Then install.I say maybe it's CPU is broken so you can go in gurantee and ask them for Repair. I don't know if you hard brick if they Fix but i think They did.
I say look into this thread http://forum.xda-developers.com/showthread.php?t=1891197 You can see countury and city so borrow form you contury and if can City
Paulius7 said:
But you Flash rom REALLY FOR YOUR PHONE ? And i think next time you need to root the phone and Then install.I say maybe it's CPU is broken so you can go in gurantee and ask them for Repair. I don't know if you hard brick if they Fix but i think They did.
I say look into this thread http://forum.xda-developers.com/showthread.php?t=1891197 You can see countury and city so borrow form you contury and if can City
Click to expand...
Click to collapse
Yes I'm sure I was installing a right ROM meant for my phone. The resurrection remix 3.0.9 for I9100. this is what I did exactly.
1. went to stock recovery
2. installed CWM.zip from external SD card.
3. Got into temporary CWM recovery and then made a nandroid backup with success.
4. tried to wipe data but got stuck and rebooted my phone. It was now stuck in the galaxy logo.
5. I went to stock recovery again to install CWM.zip and this time I straight installed the resurrection remix and I got into Aroma installer and everything went fine until on 50% the phone turned off and now doesn't go on.
P.S. I was still on Stock ROM and kernel and recovery when trying to do this. Was using a temporary CWM recovery to install a custom ROM and kernel. I had root access already.
P.S2 I put the charger in and it doesn't even show the battery icon, nothing. and yes the camera is getting hot. Is it a hard brick / dead brick or what ever you call it? if I take it to guarantee, will they fix it or will they be able to see that I damaged my phone myself? thanks
P.S3 can the USB jig work on this problem also?
Sent from my GT-I9300 using xda app-developers app
If it soft bricked i think JTAG will help you
But if not try this:
Try to change battery MAYBE THAT HELP i don't now i gueses(Sorry bad english) i don't know really
Try this:
Step one would be the Jig
Step two would be a paid for JTAG repair
Step three would be a paid for service centre repair
And try to get out battery for about 1 hour
http://forum.xda-developers.com/showthread.php?t=1661909
I will do this when I get home from work, thanks a lot for all the advice.
If anyone has other suggestions, please help. thanks.
Sent from my GT-I9300 using xda app-developers app
andresantos said:
Yes I'm sure I was installing a right ROM meant for my phone. The resurrection remix 3.0.9 for I9100. this is what I did exactly.
1. went to stock recovery
2. installed CWM.zip from external SD card.
3. Got into temporary CWM recovery and then made a nandroid backup with success.
4. tried to wipe data but got stuck and rebooted my phone. It was now stuck in the galaxy logo.
5. I went to stock recovery again to install CWM.zip and this time I straight installed the resurrection remix and I got into Aroma installer and everything went fine until on 50% the phone turned off and now doesn't go on.
P.S. I was still on Stock ROM and kernel and recovery when trying to do this. Was using a temporary CWM recovery to install a custom ROM and kernel. I had root access already.
P.S2 I put the charger in and it doesn't even show the battery icon, nothing. and yes the camera is getting hot. Is it a hard brick / dead brick or what ever you call it? if I take it to guarantee, will they fix it or will they be able to see that I damaged my phone myself? thanks
P.S3 can the USB jig work on this problem also?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
You said The resurrection remix 3.0.9 for I9100 I9100 ist the Samsung Galaxy S2!! Not S3
kaboma said:
You said The resurrection remix 3.0.9 for I9100 I9100 ist the Samsung Galaxy S2!! Not S3
Click to expand...
Click to collapse
I know, I'm trying to flash my girlfriends galaxy s2
Sent from my GT-I9300 using xda app-developers app
andresantos said:
I know, I'm trying to flash my girlfriends galaxy s2
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Ohh, ok I see :laugh::laugh:
@kaboma
Next time Read carrefully and you see it
@andresantos
How the going with the phone ?
Was it on a 4.0.4 ROM? Did you check if it has a bad chip? ie. is susceptible to the emmc bug before flashing?
That could possibly be the cause, although I cant be sure now unless you have her stock rom/kernel details. And if it is, I'm sorry but AFAIK theres no solution to that yet.
Do try getting hold of a USB jig and trying your luck with that first, though.
Hope it works out :fingers-crossed:
Did you try to wipe ANYTHING on stock 4.0.4 kernel ? if you did, then you've been afected by the emmc brickbug and there's no other way to fix it other than replacing the entire motherboard.
Did you try to put your device in download mode (pressing the power button, home button and volume down key) ? If you can get into it, flash a stock rom and problem solved.
Can you enter recovery mode ?
Next time you try to get cwm, just flash siyah and you'll get the whole package (permanent cwm + root + plenty of features) and only after that try to wipe and install custom roms
@Poroto
HE SAID HE CAN"T GO ANYWHERE.
So it's can be Hardbrick or like (Ram's or CPU or Video card is broken) MAYBE
Because i had i problem with CPU it's can't go anywhere it was problem with CPU
Related
Hi
I searched and only found similar cases with other phones and no solution.
I was on stock 4.0.3 with CWM, rooted and siyah kernel and tried to upgrade to CM9
with Rom manager
i dled cm9 with gapps and let ROM Manager do the backup, wipe and reboot to recovery
but then i just saw the first GT 9100i boot screen with the triangle and after that
the screen stayed black.
i noticed in a darker area that the screen blinked everey few seconds, so i guess its trying to reboot all the time. some kind of bootloop?
i cant access the cwm, nor boot normaly.
just the download mode is working
so i tried to flash a stock FW from intratechs thread via odin
but... FAIL
help would be much appreciated right know :crying:
thank you
Mmm I've had issues with rom manager before but never this severe. All I can suggest is what I would do which is to fash stock firmware from samfirmware via PDA section in odin. If this doesn't work I think there is a sticky thread which is dedicated to situations like this. It requires flashing a firmware via odin again but all partitions are used so it will wipe your device. All the best.
Sent from my GT-I9100 using xda premium
skarboy said:
Hi
I searched and only found similar cases with other phones and no solution.
I was on stock 4.0.3 with CWM, rooted and siyah kernel and tried to upgrade to CM9
with Rom manager
i dled cm9 with gapps and let ROM Manager do the backup, wipe and reboot to recovery
but then i just saw the first GT 9100i boot screen with the triangle and after that
the screen stayed black.
i noticed in a darker area that the screen blinked everey few seconds, so i guess its trying to reboot all the time. some kind of bootloop?
i cant access the cwm, nor boot normaly.
just the download mode is working
so i tried to flash a stock FW from intratechs thread via odin
but... FAIL
help would be much appreciated right know :crying:
thank you
Click to expand...
Click to collapse
Can you still get into Download Mode?
EDIT:
Try manually wiping data, cache and dalvik cache.
Try to go into recovery. Hold down volumen up, home key, and power on, at once hold them down ontil you reach recovery.
Sendt fra min GT-I9100 med Tapatalk2
I had that problem too-a black screen with a flash down the rh side of the screen every few seconds.
I managed a repair via odin after a couple of attempts.
Sent from my GT-I9100 using xda premium
Flash a stock kernel then wipe everything the recovery it comes with. Also make your flashing roms for your 9100i model.
Sent from my GT-I9100 using Tapatalk 2
thank you very much
i just reflashed a few times as adviced with my dled rom
am on stock again
retry without rommanager
ftw
Remove rom manager and dont use it again on your s2.
Sent from my GT-I9100 using xda premium
skarboy said:
thank you very much
i just reflashed a few times as adviced with my dled rom
am on stock again
retry without rommanager
ftw
Click to expand...
Click to collapse
I have the very same problem as you.
I can enter download mode but can't enter recovery mode.
I can flash any rom I can find but all of them have no use.
Still can't boot nor recovery.
Have you fixed the problem just by reflashing stock rom?
theunderling said:
Remove rom manager and dont use it again on your s2.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
This. How many times people saying:Rom manager doesn't work on S2 100%!!! Read people, read again before doing something!!
Mr.Greg said:
This. How many times people saying:Rom manager doesn't work on S2 100%!!! Read people, read again before doing something!!
Click to expand...
Click to collapse
Yes, that's our fault that haven't read enough before installing a software.
But is there any way to revive our phone?
wm_shi said:
Yes, that's our fault that haven't read enough before installing a software.
But is there any way to revive our phone?
Click to expand...
Click to collapse
the only way to revive ur phone, is to flash a stock ICS 4.0.3 firmware thro 'ODIN' and have a clean boot of ur phone
and never use 'Rom Manager' in the future
Hi, i'm a new user of SG SII, and i don't know much about it. I was trying to install new ROM on it, first I tried to unroot my phone with CF ROOT, after that everthing was OK. Then i tried to install REVOLT JB i9100 ver 2.8.2, when i got by CWM in recovery, instead of clicking wipe data, then cache and ccache partition i did: wipe data/factory reset, and wipe cache partition, wipe dalwik cache and format system. I flashed kernel and during ROM installation phone turned off and did turn on. i think it's hard bricked. I don't know what to do, please help.
Are you still able to get into don't download mode o your phone ? ( volume down, home key, power button )
If so, reflash your kernel and go from there.
Also have a look at CyanogenMod, they have a good post with instructions on here.
Sent from my GT-I9100 using xda premium
x
Dorbian said:
Are you still able to get into don't download mode o your phone ? ( volume down, home key, power button )
If so, reflash your kernel and go from there.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
no, phone doesn.t response on anything, even if i'm charging the battery.
Try removing your battery and unplug cables.
Then try download or recovery mode again.
If it really doesnt work then there is probably something fried on your system board, doubt anything you can do about it as i had the same not that long ago out of the blue.
Sent from my GT-I9100 using xda premium
.
Dorbian said:
Try removing your battery and unplug cables.
Then try download or recovery mode again.
If it really doesnt work then there is probably something fried on your system board, doubt anything you can do about it as i had the same not that long ago out of the blue.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Did it and still nothing, do you think that maybe JIG plug could be a good idea?
You could always give it a go, havent had any experience with i myself tho so hopefully someone else here can give you a hand
Sent from my GT-I9100 using xda premium
I had a similar issue with sgs1 back in the day. I built a jig and got it working so give it a shot if you can. Its worth it for the cost of a jig surely?
Sent from my GT-I9100 using xda app-developers app
.
ok, i'll try to do it. but i have to ask if that will not work, can i save my phone by changing main board on warranty in service?
You can always tell them that you were updating via kies and it dropped dead just like that.
Your battery was low when you tried to flash it, wasn't it?
try a jig first tho; there's something fishy about those wipes you mentioned.
pawlo130 said:
Hi, i'm a new user of SG SII, and i don't know much about it. I was trying to install new ROM on it, first I tried to unroot my phone with CF ROOT, after that everthing was OK. Then i tried to install REVOLT JB i9100 ver 2.8.2, when i got by CWM in recovery, instead of clicking wipe data, then cache and ccache partition i did: wipe data/factory reset, and wipe cache partition, wipe dalwik cache and format system. I flashed kernel and during ROM installation phone turned off and did turn on. i think it's hard bricked. I don't know what to do, please help.
Click to expand...
Click to collapse
On some occasions flashing a device can use 40-50% of battery to prep and flash device which is why its advised to never flash your phone unless you have at least 50-60% battery.
If power cuts out during flashing procedure it can damage nand/ic chip, corrupt bootloader, corrupt sdcards etc.
After leaving it plugged into to charger overnight try a USB jig to see if you can get it to wake up in download mode, If you can re-flash rom and go from there.
gastonw said:
You can always tell them that you were updating via kies and it dropped dead just like that.
Your battery was low when you tried to flash it, wasn't it?
try a jig first tho; there's something fishy about those wipes you mentioned.
Click to expand...
Click to collapse
battery was about 70%, so it should not have turned off
pawlo130 said:
battery was about 70%, so it should not have turned off
Click to expand...
Click to collapse
then I was right with the fishy wipes.
pray for the jig.
From what you described, it couldn't have hard bricked your phone. In fact, it isn't easy to hard brick our phone unless you install that infamous ICS 4.0.4 leaked ROM or mess with flashing of PIT file. Try to use another fully charged battery to boot up or go into CWM recovery.
Sent from my GT-I9100 using Tapatalk 2
xdanoober said:
From what you described, it couldn't have hard bricked your phone. In fact, it isn't easy to hard brick our phone unless you install that infamous ICS 4.0.4 leaked ROM or mess with flashing of PIT file. Try to use another fully charged battery to boot up or go into CWM recovery.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
while i was installing new rom, process was like 0% for about 5 minutes, and then phone just turned off. When i did flashing and installing CWM everything was ok. I rooted it with CF root.
Exact same problem here. Followed the root guide to the letter and all OK. Set omega rom installing and it stayed at 0 for five mins then it shut off. Now no life at all.
Gonna build a jig tomorrow so I'll update here if it works.
Really hope so as it's a mates phone.
I've done my s3, s1 and the Mrs s2 without it going wrong so I'm not sure how it went wrong this time.
Sent from my GT-I9300 using xda premium
SkinBobUk said:
Exact same problem here. Followed the root guide to the letter and all OK. Set omega rom installing and it stayed at 0 for five mins then it shut off. Now no life at all.
Gonna build a jig tomorrow so I'll update here if it works.
Really hope so as it's a mates phone.
I've done my s3, s1 and the Mrs s2 without it going wrong so I'm not sure how it went wrong this time.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Your phone have got super brick, and the JIG nothing to do.... You must go to service.
The reason for this is stock kernel who has kode cause brick.
Sorry for my english!
Ah that's a shame. Fingers crossed it's still under warranty or it's gonna be an expensive month.
Sent from my GT-I9300 using xda premium
SkinBobUk said:
Ah that's a shame. Fingers crossed it's still under warranty or it's gonna be an expensive month.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Don't worry will be fine. JTAG must be repair all
Wysyłane z mojego GT-S6500D za pomocą Tapatalk 2
I've rooted and flashed many times before.
Recently got phone back from repair after SDS and wanted to put Omega 38 on it.
Rooted it fine no problem using Odin... but have read things about CWM recovery possibly still having the problem, so thought (as I'd seen on here) that I needed philz's CWM. Don't know what I've done but now my phone appears "stuck" again.
It gets no further than the black screen with the white Samsung Galaxy Siii logo. Even if I pull the battery still nowt other than that.
I can get the phone recognised in odin, and I can also get into (I think) philz's recovery by volume up+menu+power. I've done a factory wipe and reset but when the phone starts it still stops on the logo page.
Previously, I got stock CWM (that was provided when I rooted with odin and CF-Root-SG3-v6.4) and it mentioned something about not being able to mount sd card and something about android secure. On another thread it mentions something like this with the S2 which required a odin stock tar flash.
Help me sort this problem - already been down with SDS and losing the will to live now! I just want a safe Omega38 and a safe recovery, as it wouldn't look good sending the phone back with SDS again with the same IMEI/Serial number!
did you try to put it Download mode and flash it again with Odin stock firmware 4.1.2... !!
if they change for you interal sd at your first service then you will be okay.
Have you tried a full stock flash with odin? (Not Omega or other custom rom)
I always use a full stock flash with btu csc so I keep my product code. Perka has a flash with LLA and no bootloader.
At the moment I use LLA and an older JB bootloader.
So to recap, flash a full stock firmware. If it does not boot you will then have to reflash Philz recovery again. Use volume up home and power to reboot the phone and goto recovery. Do a factory reset and reboot the phone.
You should then have a fully clean stock flash.
Or you could boot to CWM recovery and format data, system and cache. Then reboot to download mode and flash you stock rom.
If all is ok then flash Omega.
Short of that maybe its gone all Pete Tong and possibly send it back.
Sent from my GT-I9300 using xda premium
Thanks guys
I went away, had a brew and thought about stuff a little.
Managed to flash omega by getting it onto my sdcard. Then did a wipe of everything, and installed omega v38
Seems to be up and running now. I'm assuming that I should remove any links to CWM in my phone menu, and if need download mode in future, just use Volume Up, Menu and Power?
So you didn't notice the help section?
Glebun said:
So you didn't notice the help section?
Click to expand...
Click to collapse
U didnt notice that u r annoying with ur whining abt help,q/a section?!?
Sent from my GT-I9300 using xda premium
actually, no. so you don't care about the rules? you're not welcome here then
Please post questions in Q&A
Thread moved
Glebun said:
actually, no. so you don't care about the rules? you're not welcome here then
Click to expand...
Click to collapse
Well atleast i got posts legit not abt whining q/a and that stuff
Sent from my GT-I9300 using xda premium
And you expect help with a post like that .
jje
Ok im new to this whole rooting thing, i own a galaxy note i717 and i tried rooting it but when i used odin clicked pda then slected file and hit start it went through the process and even passed but now when i turn my phone on it shows the samsung logo then a blank screen i think i might have screwed up my phone really good, and can it be fixed? IF YOU would help me unbrick my phone please do. My phone is my whole life i have alot of important information on it. email @ [email protected]
mwebb34 said:
Ok im new to this whole rooting thing, i own a galaxy note i717 and i tried rooting it but when i used odin clicked pda then slected file and hit start it went through the process and even passed but now when i turn my phone on it shows the samsung logo then a blank screen i think i might have screwed up my phone really good, and can it be fixed? IF YOU would help me unbrick my phone please do. My phone is my whole life i have alot of important information on it. email @ [email protected]
Click to expand...
Click to collapse
Do you have clockworkmod recovery installed? If so try going into recovery and wipe the cache and dalvik cache
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
it's showing the Samsung logo, you aren't bricked it is still turning on.
just reflash a stock Odin file
mwebb34 said:
Ok im new to this whole rooting thing, i own a galaxy note i717 and i tried rooting it but when i used odin clicked pda then slected file and hit start it went through the process and even passed but now when i turn my phone on it shows the samsung logo then a blank screen i think i might have screwed up my phone really good, and can it be fixed? IF YOU would help me unbrick my phone please do. My phone is my whole life i have alot of important information on it. email @ [email protected]
Click to expand...
Click to collapse
You might give some more info on what all you did or what file you were trying to flash....
Sounds like the problem of Gingerbread root on ICS system, or vice-versa. Just redo your work, ensuring you use the appropriate file for your system.
By the way, NEVER tweak your system until you learn to move important stuff to your external sd card or pc.
Boot into clockwork mod. Do factory wipe, wipe dalvik/cache. Should fix it.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Adonisd said:
Boot into clockwork mod. Do factory wipe, wipe dalvik/cache. Should fix it.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Yea what i said.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Its the best advice that's why it deserves an echo!
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Really? I think the best advice was rangercaptain's advice followed by crixley. OP was using odin which means he was trying to install a rooted kernel most likely from a different android version or he was installing CWM. So I highly doubt he has CWM installed and functioning. So how is he going to boot into CWM??
Well I guess I thought he followed the proper instructions and installed cwm first. I admittedly skimmed most of the posts.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
What if we can't get into clockwork mod any more?
Adonisd said:
Boot into clockwork mod. Do factory wipe, wipe dalvik/cache. Should fix it.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
I screwed mine up by not wiping after installing the new Cyanogenmod. The thing is, I can't get it to boot into clockwork mod recovery mode any more. Volume up + home + power is not doing it. Have I bricked it?
stinkyp00t said:
I screwed mine up by not wiping after installing the new Cyanogenmod. The thing is, I can't get it to boot into clockwork mod recovery mode any more. Volume up + home + power is not doing it. Have I bricked it?
Click to expand...
Click to collapse
Its volume up + volume down + power hold those.
ROM: Jamie's 4.2.2. Previews\Jellybam v6.6.0\Sons Of Android.
Kernel: Chris's Aces Kernel.
Recovery: TWRP.
:thumb up: Give Thanks! :thumb up:
I have to chime in here...I have bricked mine, too, started with 4.0.1...I installed cwm-LATEST touch-i717, followed by openrecovery-twrp-2.2-sgh-i717-signed, ran fine. Then I was going to use Liquid-JB-v2.0-RC8-d2att.zip, but used the wrong gapps (Google Apps) file, gapps-jb-20120726-signed, instead of Liquid-JB-v2.0-RC8-gapps. Now, I have a black screen, and on my Mac, the thing just connects and reconnects all by itself! Can I get out of this, if I can't get to a restore screen?
lildaddym said:
I have to chime in here...I have bricked mine, too, started with 4.0.1...I installed cwm-LATEST touch-i717, followed by openrecovery-twrp-2.2-sgh-i717-signed, ran fine. Then I was going to use Liquid-JB-v2.0-RC8-d2att.zip, but used the wrong gapps (Google Apps) file, gapps-jb-20120726-signed, instead of Liquid-JB-v2.0-RC8-gapps. Now, I have a black screen, and on my Mac, the thing just connects and reconnects all by itself! Can I get out of this, if I can't get to a restore screen?
Click to expand...
Click to collapse
You were going to flash the wrong Rom anyways d2att is s3. Would have bricked you right there if you flashed it. If you can't get to download mode or recovery you will most likely need jtag
Sent from my SAMSUNG-SGH-I717 using xda premium
Is that something one can do themselves? What is JTAG?
rquiett said:
You were going to flash the wrong Rom anyways d2att is s3. Would have bricked you right there if you flashed it. If you can't get to download mode or recovery you will most likely need jtag
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
A JTAG is a recovery service offered for bricked phones. You can find one for your device at mobiletechvideos.com for 50$. Just Google android JTAG service. It will come up. Hit thanks
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
There has to be another answer...
When you find it, come back here and share it with us.
JTAG service costs $50, takes a week, and restores a phone that cannot enter recovery, or download mode, or isn't recognised by a computer.
WWW.mobiletechvideos.com
MobileTechVideo Works
rangercaptain said:
When you find it, come back here and share it with us.
JTAG service costs $50, takes a week, and restores a phone that cannot enter recovery, or download mode, or isn't recognised by a computer.
WWW.mobiletechvideos.com
Click to expand...
Click to collapse
Just to chime in here... I just got my AT&T Note back from MobileTechVideo. I had them do a JTAG repair ($50) and ordered a new jig. They replied with fast, reliable service. I highly recommend them if you decide to send your phone out for repair.
zancro said:
Just to chime in here... I just got my AT&T Note back from MobileTechVideo. I had them do a JTAG repair ($50) and ordered a new jig. They replied with fast, reliable service. I highly recommend them if you decide to send your phone out for repair.
Click to expand...
Click to collapse
Thanks, but I found someone a little more personal...when I approached them, they simply recommended that I send it to them, rather than try some basic troubleshooting... Maybe just the way they do things...lots of volume with MobileTechVideo...
Hi developers
I bought a new SD card, 32 gb for my samsung galaxy trend plus. A toshiba one. It was fine untill i saw that my screen was on, but black. Couldnt do anything. Rebooted and when booted back it was fine. But after some time it got black again. Rebooting wouldnt change anything. I see the samsung logo but i cant see my bootanimation. It is just a black screen. I removed the SD and re-tried, i thought that may be the issue. But nothing. I got to recovery and realised its all good. 100% functional. In fact i could mount my SD and do pretty much anything. My phone is rooted. What to do?
I would prefer not to format because I have very valuable pictures and music in my internal and apps in my SD aswell. Thanks in advance.
I am using linux so if any programs should be downloaded please indicate me the linux ones. Thanks so much and sorry if im being greedy or what
I unrooted my phone and works great. Why?
Sent from my GT-S7580 using XDA Free mobile app
hello there. my phone does not turn on. When I insert charge a blank battery with the sign arrow display. Phone did not rooted so when i press volume down+home+power odin screen comes but it says downloading do not touch obviously nothing changing.
I wonder that can i download a stock rom and put in sd card try to set up? I have no idea to solve this problem.
I would be glad if you could help.
yub said:
hello there. my phone does not turn on. When I insert charge a blank battery with the sign arrow display. Phone did not rooted so when i press volume down+home+power odin screen comes but it says downloading do not touch obviously nothing changing.
I wonder that can i download a stock rom and put in sd card try to set up? I have no idea to solve this problem.
I would be glad if you could help.
Click to expand...
Click to collapse
Hey there. I had just my first soft brick and it seems u too. I got many soft brickes l8r and evem found why.
You cant flash Stock rom with SD. If rooted u can get a custom ROM in sd and flash it in recovery. If not rooted consider going to sammobile.com and getting the stock rom for your phone and flash it via odin! That will do the trick
Sent from my GT-S7580L using XDA Free mobile app
SlimShady08 said:
Hey there. I had just my first soft brick and it seems u too. I got many soft brickes l8r and evem found why.
You cant flash Stock rom with SD. If rooted u can get a custom ROM in sd and flash it in recovery. If not rooted consider going to sammobile.com and getting the stock rom for your phone and flash it via odin! That will do the trick
Sent from my GT-S7580L using XDA Free mobile app
Click to expand...
Click to collapse
thank you for reply.
It is not rooted then i will go sammobile.com and what? how can i flash? via sd? since i cant open the phone
and finally can you send me the link from sammobile.
yub said:
thank you for reply.
It is not rooted then i will go sammobile.com and what? how can i flash? via sd? since i cant open the phone
and finally can you send me the link from sammobile.
Click to expand...
Click to collapse
http://sammobile.com
Download your phones image and then get your phone in download mode and flash via odin.
Sent from my GT-S7580L using XDA Free mobile app
hey there. i did what you said to me. setup the rom via odin and then phone restarted but the logo of samsung didnt pass then i closed down the phone try to open it but still same problem.
yub said:
hey there. i did what you said to me. setup the rom via odin and then phone restarted but the logo of samsung didnt pass then i closed down the phone try to open it but still same problem.
Click to expand...
Click to collapse
Try it again without the external SD card inside and doing a factory reset first
Sent from my GT-S7580L using XDA Free mobile app
I tried without external sd card. and i dont know what should i do for factory reset and which files are necessary ?
yub said:
I tried without external sd card. and i dont know what should i do for factory reset and which files are necessary ?
Click to expand...
Click to collapse
Go to recovery and do data/factory reset or tick F.reset time in ODIN
Sent from my GT-S7580L using XDA Free mobile app
SlimShady08 said:
Go to recovery and do data/factory reset or tick F.reset time in ODIN
Sent from my GT-S7580L using XDA Free mobile app
Click to expand...
Click to collapse
the problem is that i cant go recovery mode. when i press volume up+home+power samsung logo comes and no more happening.
yub said:
the problem is that i cant go recovery mode. when i press volume up+home+power samsung logo comes and no more happening.
Click to expand...
Click to collapse
Try to boot into download mode.
Then, connect your phone to your pc and open Odin 3.0.7 (firmware version!)
It should recognize the device and you'll see something will be added at id:com.
In the pda box, add your stock rom which you downloaded and flash it!
That should fix it.
If not, your device is hard-bricked and can't be fixed.
Don't forget to press the thanks button if I helped you!