Or it will always unlock as glove mode.
(second screenprotector over preinstalled one, I tried 3 different brands)
Anyone else noticed?
Honestly, I don't think screenprotectors are thick enough to be detected as gloves, Sony should have considered that.
Gesendet von meinem LT26i
Sirence said:
Or it will always unlock as glove mode.
(second screenprotector over preinstalled one, I tried 3 different brands)
Anyone else noticed?
Honestly, I don't think screenprotectors are thick enough to be detected as gloves, Sony should have considered that.
Gesendet von meinem LT26i
Click to expand...
Click to collapse
I don't have that problem to be honest. I've a screenprotector on top of the shatterproof layer.
Narathan said:
I don't have that problem to be honest. I've a screenprotector on top of the shatterproof layer.
Click to expand...
Click to collapse
On ics?
Hm at first I thought it was dirt under the screenprotector or the brand but I tried different ones and cleaned the whole device.
That's super strange.
It works like a charm without it.
Can I ask what screenprotector you use??
Gesendet von meinem LT26i
Sirence said:
Or it will always unlock as glove mode.
(second screenprotector over preinstalled one, I tried 3 different brands)
Anyone else noticed?
Honestly, I don't think screenprotectors are thick enough to be detected as gloves, Sony should have considered that.
Gesendet von meinem LT26i
Click to expand...
Click to collapse
Works perfect for me with a screen protector
Sent from my MT27i using xda app-developers app
I also have no problem with screen protector.. just a normal screen protector.
Related
My guess its I have some how scratched through the coating on the screen, but I now have a mark on the screen that is fine when the background is dark, but when there is a white background, it comes up as a light blue mark (refraction effect). Has anyone had this? Anyone found a way to fix it? Sorry I can't really get a good picture of it
Sent from my GT-I9100 using xda premium
No, don't have this. It looks like it is hardware related. Warranty?
Gesendet von meinem Galaxy S2 mit Tapatalk
Warranty voided. Its due to a scratch, wasn't there yesterday, and there today. Probably some grit or something in my pocket. Wondering if there is a coating replacement that doesn't go to level of screen protector (can never get them on right)
Sent from my GT-I9100 using xda premium
roguefan99 said:
Warranty voided. Its due to a scratch, wasn't there yesterday, and there today. Probably some grit or something in my pocket. Wondering if there is a coating replacement that doesn't go to level of screen protector (can never get them on right)
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
nothing you can do but put a screen protector on it. Are you sure you don't have a dead pixel
Hi! I'm using a white non-LTE Xperia Z Ultra. Today I happened to mess up the aluminium frame when I was sitting in the chair playing game on my PC. My Xperia Z Ultra slipped out of my pocket and hit the floor! It managed to scratch/peel off the paint on the aluminium frame at the edge. How do I fix this? Please help!
Buy a new phone?
or
http://www.nutelsolutions.co.uk/spa...-z-ultra-black-usb-cover-1271-0930-50136.html ?
The top and bottom isn't aluminium. Its plastic.
Written on the refrigerator
SÜPERUSER said:
The top and bottom isn't aluminium. Its plastic.
Written on the refrigerator
Click to expand...
Click to collapse
Oh? I thought they were aluminium :/
SÜPERUSER said:
The top and bottom isn't aluminium. Its plastic.
Written on the refrigerator
Click to expand...
Click to collapse
blueether said:
Buy a new phone?
or
http://www.nutelsolutions.co.uk/spa...-z-ultra-black-usb-cover-1271-0930-50136.html ?
Click to expand...
Click to collapse
No.. I'm not going to disassemble my phone 'cause I think it'll not be waterproof again. Just like my Z.
JadHusin said:
No.. I'm not going to disassemble my phone 'cause I think it'll not be waterproof again. Just like my Z.
Click to expand...
Click to collapse
if you are really bothered with the paint going off you can go to a local store and have them match the colour. Sand down the surface, clean, mask of the other areas and paint
Written on the refrigerator
JadHusin said:
Oh? I thought they were aluminium :/
Click to expand...
Click to collapse
Yeah, the sides are aluminium but the top and bottom is plastic as far as I know.
Sent from my C6833 using Tapatalk
LordManhattan you know what I will say wing wing )) do i need to rant here ( plassstttttticcccc ) holly cow good to know as this adds to my list
hykhleif said:
LordManhattan you know what I will say wing wing )) do i need to rant here ( plassstttttticcccc ) holly cow good to know as this adds to my list
Click to expand...
Click to collapse
Don't even go down that road, mister
LordManhattan said:
Yeah, the sides are aluminium but the top and bottom is plastic as far as I know.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
I'm pretty sure I've read about the full frame made of aluminium. But then I read that the aluminium is covered with paint (I guess to have the same colour on every single device).
Sent from my C6833 using Tapatalk 2
fastest83 said:
I'm pretty sure I've read about the full frame made of aluminium. But then I read that the aluminium is covered with paint (I guess to have the same colour on every single device).
Sent from my C6833 using Tapatalk 2
Click to expand...
Click to collapse
The top and bottom is a plastic otherwise there would be issues with the antennas getting shielded off. The sides seems to be powdercoated while the top and bottom perhaps is laminated as you do when you print labels on to plastic boxes. Melting a piece of plastic onto the surface.
SÜPERUSER said:
The top and bottom is a plastic otherwise there would be issues with the antennas getting shielded off. The sides seems to be powdercoated while the top and bottom perhaps is laminated as you do when you print labels on to plastic boxes. Melting a piece of plastic onto the surface.
Click to expand...
Click to collapse
You know what? You're actually right.
I went to check the infographic that Sony published a while ago (
)
and confirmed that only the sides are made of aluminium.
Sent from my C6833 using Tapatalk 2
fastest83 said:
You know what? You're actually right.
I went to check the infographic that Sony published a while ago
and confirmed that only the sides are made of aluminium.
Sent from my C6833 using Tapatalk 2
Click to expand...
Click to collapse
Ooh, that's a cool way of showing how the ZU is built! Thanks
LordManhattan said:
Ooh, that's a cool way of showing how the ZU is built! Thanks
Click to expand...
Click to collapse
What?? I mean: WHAT??
It was an article on the official blog and on Xperiablog.net, which I check like ten times a day to see if there's any news on updates for our Ultra...
Sent from my C6833 using Tapatalk 2
So main frameis not made of aluminium as I thought earlier.
umm, the graphic shows all 4 sides are aluminium...
blueether said:
umm, the graphic shows all 4 sides are aluminium...
Click to expand...
Click to collapse
Well, the graphic isn't indeed that clear...
It says "side panels", not specifying which sides... it may refer to every side, since top and bottom are sides too...
Extract from an early interview on Z Ultra design:
So I guess they say "sides" and actually mean "ALL sides", which makes sense, as with the word "sides", if not specified, you 99% mean all of them...
So it may be all aluminium and all covered with paint...
Sent from my C6833 using Tapatalk 2
fastest83 said:
Well, the graphic isn't indeed that clear...
It says "side panels", not specifying which sides... it may refer to every side, since top and bottom are sides too...
Extract from an early interview on Z Ultra design:
...
So I guess they say "sides" and actually mean "ALL sides", which makes sense, as with the word "sides", if not specified, you 99% mean all of them...
So it may be all aluminium and all covered with paint...
Sent from my C6833 using Tapatalk 2
Click to expand...
Click to collapse
Here, it shows all 4 sides:
blueether said:
Here, it shows all 4 sides:
Click to expand...
Click to collapse
Good find mate, I knew I had missed something...
Sent from my C6833 using Tapatalk 2
blueether said:
Here, it shows all 4 sides:
Click to expand...
Click to collapse
Well well well, looks like you're right. Awesome.
Sent from my C6833 using Tapatalk
When I got this phone it can with a really nice screen protector pre-installed. Had like a soft gibberish feel to it and somewhat spongy almost.
I foolishly took it off to put on a glass one as I always do but then found out the hard way about fitment issues with the curved top.
Anyway, does anyone know where I can get the gibberish feeling ones similar to the factory fitted one?
Or anyone even know what I'm talking about lol
Sent from my LG-H850 using Tapatalk
Try Spigen, i have been using one myself and it is quite good.
_ray_ said:
Try Spigen, i have been using one myself and it is quite good.
Click to expand...
Click to collapse
Has it got the rubberish texture to it?
Like I could press gently with my nail and it would temporarily leave a wee indent which would quickly rise again
Sent from my LG-H850 using Tapatalk
Roshi69 said:
Has it got the rubberish texture to it?
Like I could press gently with my nail and it would temporarily leave a wee indent which would quickly rise again
Sent from my LG-H850 using Tapatalk
Click to expand...
Click to collapse
No, actually its quite thin but sturdy and cover the whole of the screen.
Happy days. Thanks for the reply. Maybe get one of them because I was worried about the curve at the top
Sent from my LG-H850 using Tapatalk
Can anyone recommend a clear case that is better than the one that comes with the device?
Find
Did you manage to find anything?
jklondon said:
Can anyone recommend a clear case that is better than the one that comes with the device?
Click to expand...
Click to collapse
I bought a Spigen Ultra Hybrid from Amazon.ca
The edge of the case does wrap around to the front of the screen a bit so it sort of protects the screen but at the same time might affect typing.
Has enough thickness to protect the camera bulge. However, it does attract fingerprints on the back quite easily.
bluebirdsmike said:
Did you manage to find anything?
Click to expand...
Click to collapse
I was wondering this as well. Have a midnight blue P20 Pro arriving soon and was hoping to get a lighteight clear case with some protection if possible.
Price / quality is very good. I ordered 2 colors blue and red, very satisfied
http://s.aliexpress.com/6NJjUNzq?fromSns=Panoya
I like my Otterbox. It provides good protection.
https://www.otterbox.com/en-us/huawei-p20-pro/prefix-series-case/hua69-p20-pro.html
Gesendet von meinem CLT-L29 mit Tapatalk
serif55 said:
Price / quality is very good. I ordered 2 colors blue and red, very satisfied
http://s.aliexpress.com/6NJjUNzq?fromSns=Panoya
Click to expand...
Click to collapse
Would you mind posting real life photos of the case?
Cheers
Sent from my CLT-L29 using Tapatalk
thanito said:
Would you mind posting real life photos of the case?
Cheers
Sent from my CLT-L29 using Tapatalk
Click to expand...
Click to collapse
I did not find the red cover, but it looks alive like blue.
serif55 said:
I did not find the red cover, but it looks alive like blue.
Click to expand...
Click to collapse
Νice! If you have the chance to also take a snap with the case on the phone it will be great, thanks
Sent from my CLT-L29 using Tapatalk
thanito said:
Νice! If you have the chance to also take a snap with the case on the phone it will be great, thanks
Sent from my CLT-L29 using Tapatalk
Click to expand...
Click to collapse
Of course
Good news for everyone, I have found the protector film for front camera of our Mix 3. Here is the link for it and some accessories that I ordered for my Mix 3
https://list.tmall.com/search_produ...0.a2227oh.d100&from=.detail.pc_1_searchbutton
Minh Dao said:
Good news for everyone, I have found the protector film for front camera of our Mix 3. Here is the link for it and some accessories that I ordered for my Mix 3
https://list.tmall.com/search_produ...0.a2227oh.d100&from=.detail.pc_1_searchbutton
Click to expand...
Click to collapse
unfortunately only Chinese [emoji849]
Gesendet von meinem MIX 3 mit Tapatalk
pittrich67 said:
unfortunately only Chinese [emoji849]
Gesendet von meinem MIX 3 mit Tapatalk
Click to expand...
Click to collapse
You can find some service to buy it from China then ship it to your country. I'm in Vietnam and I use a service to buy then ship it to me
Minh Dao said:
Good ne itws for everyone, I have found the protector film for front camera of our Mix 3. Here is the link for it and some accessories that I ordered for my Mix 3
https://list.tmall.com/search_produ...0.a2227oh.d100&from=.detail.pc_1_searchbutton
Click to expand...
Click to collapse
What is the search query you used
@Minh Dao Hey there, could you make some pictures of it and maybe measure up the film? That would make it mutch more easy to cut it by myself ^^