Related
Hi guys. I just received hdmi cable from ebay.in.
i wanted to knw will this work without any adapter...
i am attching image.
Looks like the same one I got, I will try it later for you
---------- Post added at 08:12 AM ---------- Previous post was at 08:11 AM ----------
Just noticed you got yours already! Why don't you just try it!
rohan_avni said:
Hi guys. I just received hdmi cable from ebay.in.
i wanted to knw will this work without any adapter...
i am attching image.
Click to expand...
Click to collapse
Test it and you'll know for sure...
djembey said:
Test it and you'll know for sure...
Click to expand...
Click to collapse
well m in offc. so i cant test it now. so asked.
Hai there, I also got the same hdmi cable like that, but when i using it with my s3 Omega rom latest it doesnt show on my bravia sony lcd hdmi standy, still confius about it, does it not work with my rom?. THANKS.
slaphead20 said:
Looks like the same one I got, I will try it later for you
---------- Post added at 08:12 AM ---------- Previous post was at 08:11 AM ----------
Just noticed you got yours already! Why don't you just try it!
Click to expand...
Click to collapse
I also just noticed that u already have this cable n still u have not used it.. strange...
rohan_avni said:
I also just noticed that u already have this cable n still u have not used it.. strange...
Click to expand...
Click to collapse
I use it regularly, just not without the power input, and from his question that is what he wanted to know
well i tried but no luck. it shows black screen & 720*480 hdmi connected
is there any setting that i have to do in phone ???
Also i tried on 4 tv's so i guess issue with cable.
rohan_avni said:
well i tried but no luck. it shows black screen & 720*480 hdmi connected
is there any setting that i have to do in phone ???
Also i tried on 4 tv's so i guess issue with cable.
Click to expand...
Click to collapse
I found I had to reboot mine and hit the hdmi input on the tv during boot then I got the picture
slaphead20 said:
I found I had to reboot mine and hit the hdmi input on the tv during boot then I got the picture
Click to expand...
Click to collapse
ohh means there is a hope. ok so i have connect every thing & then rebboot the phone??
plz give me procedure that u followed.
rohan_avni said:
ohh means there is a hope. ok so i have connect every thing & then rebboot the phone??
plz give me procedure that u followed.
Click to expand...
Click to collapse
Well when I plug mine in it freezes the phone then turns off, so I leave it connected, reboot, and at the Samsung boot screen I hit the input select hdmi and wait and bingo, up it comes
slaphead20 said:
Well when I plug mine in it freezes the phone then turns off, so I leave it connected, reboot, and at the Samsung boot screen I hit the input select hdmi and wait and bingo, up it comes
Click to expand...
Click to collapse
hmm I tried that too. i guess i got the faulty cable then. have to return it. will never buy anything from ebay for sure.
thanks for your help.
Maybe try with a different Rom?
Hello,
recently after getting my phone back from repair the device will either charge very slowly or doesnt charge at all
usually reconnecting the charger back solves the problem.
i have seen in the forum many people complaining about this issue but i have never seen a real answer for this..
i did rule out the possibility that the charger is flawed, the charger is fine i even baught a new one and tried multiple others.
so it must be either the phone hardware or.. maybe software?.. in case its software i did try reformating the device
but that didnt help at all.
my question is, would reflashing the rom be a possible solution?. i never did flash the rom its the stock one from the day i got it
and it has neevr been reflashed or anything just reformat.
i have no interest in custom roms unless its necesery.
thankyou
shahaf321 said:
Hello,
recently after getting my phone back from repair the device will either charge very slowly or doesnt charge at all
usually reconnecting the charger back solves the problem.
i have seen in the forum many people complaining about this issue but i have never seen a real answer for this..
i did rule out the possibility that the charger is flawed, the charger is fine i even baught a new one and tried multiple others.
so it must be either the phone hardware or.. maybe software?.. in case its software i did try reformating the device
but that didnt help at all.
my question is, would reflashing the rom be a possible solution?. i never did flash the rom its the stock one from the day i got it
and it has neevr been reflashed or anything just reformat.
i have no interest in custom roms unless its necesery.
thankyou
Click to expand...
Click to collapse
Did you tried another Charger or charge it on the pc?
_Beni_ said:
Did you tried another Charger or charge it on the pc?
Click to expand...
Click to collapse
He alr said he changed the charger. Also, charging on a pc will definitely be slower as the voltage is lower.
Sent from my GT-I9300 using xda app-developers app
Same problem both pc and charger
shahaf321 said:
Same problem both pc and charger
Click to expand...
Click to collapse
Return to the repairer .
Doubt if flash stock will help but worth a try as you don't know what the repair has broken .
Well there are two features added on all galaxy roms i guess, one which detects unstable power and decreases the charge rate to a point which makes it stable and the safety margin which does something similar i can't really remember however if you want the normal charging rate it is a necessity that you flash a custom kernel the only one i know of which has a feature of disabling these two options is boeffla's kernel and even increase the charging rate
Sent from my GT-I9300 using XDA Premium 4 mobile app
kariiim said:
Well there are two features added on all galaxy roms i guess, one which detects unstable power and decreases the charge rate to a point which makes it stable and the safety margin which does something similar i can't really remember however if you want the normal charging rate it is a necessity that you flash a custom kernel the only one i know of which has a feature of disabling these two options is boeffla's kernel and even increase the charging rate
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Why would Samsung have unstable power on their stock charger? Think abt tat. Whr did u get tat information?
Sent from my GT-I9300 using xda app-developers app
kariiim said:
Well there are two features added on all galaxy roms i guess, one which detects unstable power and decreases the charge rate to a point which makes it stable and the safety margin which does something similar i can't really remember however if you want the normal charging rate it is a necessity that you flash a custom kernel the only one i know of which has a feature of disabling these two options is boeffla's kernel and even increase the charging rate
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
alright i will try reflashing my stock rom first , if that doesnt help i will try your way.
will report back
JellyYogurt said:
Why would Samsung have unstable power on their stock charger? Think abt tat. Whr did u get tat information?
Click to expand...
Click to collapse
I didn't say the charger was faulty i said that unstable power was supplied to the charger which led to unstable power provided by the charger
Take a look at the screenshot attached
Sent from my GT-I9300 using XDA Premium 4 mobile app
kariiim said:
I didn't say the charger was faulty i said that unstable power was supplied to the charger which led to unstable power provided by the charger
Take a look at the screenshot attached
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Wow didn't know abt this.
Sent from my GT-I9300 using xda app-developers app
JellyYogurt said:
Wow didn't know abt this.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Changing the kernel will give you a whole lot of new options too you should try it
Sent from my GT-I9300 using XDA Premium 4 mobile app
well, i've tried it during the whole day and i plugged/unplugged the charger many times
it worked fine (thats after reflashing the stock rom 4.3), after that i did notice one time it was plugged for about 20 mins and no change of battery precentage. so that got me worried..
i download "galaxy charging current" to see the values of the charging and it said
max: 600
now:999
avg:600
now im just trying 2 get suspocious maybe its the charger after all it seem maybe alittle deffected even tho its new..
kariiim said:
Changing the kernel will give you a whole lot of new options too you should try it
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
and i'd rather not touch the kernel or anything about the rom unless i definetly have to...
it does seem to be working alot better after reflashing my rom
so im gonna go ahead and try a diffrent charger again
kariiim said:
Changing the kernel will give you a whole lot of new options too you should try it
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
alright so i have decided to turn into putting a new kernel just as u suggusted "boeffla's " sounds good
now i have not been dealing with these things for a while so..
just tell me can i just flash it on my phone as it is right now? (on 4.3 stock rom )
and also do i need 2 wipe before that
and lastly if u could link me that would be great
i could not find a verision for android 4.3
and.. i need to root my phone too.. im starting to get real tired of this
lots of effort for such small problem..
shahaf321 said:
just tell me can i just flash it on my phone as it is right now? (on 4.3 stock rom )
and also do i need 2 wipe before that
and lastly if u could link me that would be great
Click to expand...
Click to collapse
Yes you can flash it on the 4.3 rom
Wiping dalvic cache and cache should be good enough
And here's the link
http://boeffla.df-kunde.de/sgs3/boeffla-kernel/Test_jb43/
You should also follow his thread for future updates
http://forum.xda-developers.com/showthread.php?t=1964572
And read through the kernel options and what they do here :
http://boeffla-kernel.de/index.php/kernel-settings
You can also pm me if you need any help with those kernel options
shahaf321 said:
and.. i need to root my phone too.. im starting to get real tired of this
lots of effort for such small problem..
Click to expand...
Click to collapse
No you don't need to be rooted to flash the kernel feel free to pm me for any further assistance.
I had this problem with my S3 using the stock charger. Sometimes it switched back to USB charging mode which was slow and sometimes couldn't even keep up while gaming. I fixed it by buying an other generic usb charger (try a cheap bulky one).
ackzsel said:
I had this problem with my S3 using the stock charger. Sometimes it switched back to USB charging mode which was slow and sometimes couldn't even keep up while gaming. I fixed it by buying an other generic usb charger (try a cheap bulky one).
Click to expand...
Click to collapse
thanks! appearntly the charger i purchased from the same store arent genuine so that might be it..
i tried a couple of friend's genuine chargers and it worked great..
im gonna purchase one like that somewhere.. maybe ill find on ebay
and test it for few weeks see if it works fine
so i guess in conclusion this mobile is very sensitive toward non-genuine chargers..
but wat did u mean by "generic usb charger" exactly..?
like the ones that r ac to usb adapters and i just connect the usb cable?
shahaf321 said:
thanks! appearntly the charger i purchased from the same store arent genuine so that might be it..
i tried a couple of friend's genuine chargers and it worked great..
im gonna purchase one like that somewhere.. maybe ill find on ebay
and test it for few weeks see if it works fine
so i guess in conclusion this mobile is very sensitive toward non-genuine chargers..
but wat did u mean by "generic usb charger" exactly..?
like the ones that r ac to usb adapters and i just connect the usb cable?
Click to expand...
Click to collapse
Maybe generic is not the right word. English is not my native language : ) What I mean is just a regular all-purpose (not necessarily branded) power supply with a USB port. Look for the maximum current output. That should match or (preferably) exceed 500 mA. Don't look for a iPhone compatible charger. These look tempting with their 2.1 A current rating but your S3 could fail to recognize the potential of the power supply and switch back to USB charging mode. Android phones recognize an AC power supply by their data lines being electrically shorted. With iPhones that's a bit different if I recall correctly.
I partly agree with your conclusion. I do think the S3 is very picky with power supplies, but I don't think a genuine charger is a guaranteed success. As stated in my previous post, my phone charges at maximum current with an unbranded charger which I bought after my original Samsung charger (the one that came with the phone) failed to achieve the same.
alright so i finaly purchased a genuine charger for sure..
appearntly the chargers i bought from the other store were not..
and i have used it for about 2 weeks now and it works amazing.. always shows 800 on charging
so in conclusion any1 have this kind of problem.. make sure the charger rly is geuine.. there r so many fakes out there..
Hi everyone, hoping for some help.
My galaxy s2 wont power on at all.... I have tried plugging USB into the PC and pressing Vol Up but nothing - this happened after replacing the USB charge port. The power flex cable accidentally ripped off.
I plug it into my laptop and it starts installing the driver but then fails. Anyone experienced this before?
Detach battery, leave it in 5 minute and attach again , power on. I face this problem before(but the cause is not same to you ) and my phone power on after i do those steps. Hope your phone will work again.
Or you could wait for KeithHarris39 who knows what he's talking about with this stuff to read your thread (he's posted to Q&A in the last hour or two, so he's probably around somewhere) & he'll actually give you some idea of what might have gone wrong/what you can do about it.
MistahBungle said:
Or you could wait for KeithHarris39 who knows what he's talking about with this stuff to read your thread (he's posted to Q&A in the last hour or two, so he's probably around somewhere) & he'll actually give you some idea of what might have gone wrong/what you can do about it.
Click to expand...
Click to collapse
i cant send u a pm ...tried it says u dont want to get disturbed..
^^^
Why would you want to send me a PM ? I have the PM system turned off by design.
MistahBungle said:
^^^
Why would you want to send me a PM ? I have the PM system turned off by design.
Click to expand...
Click to collapse
something worth ur interest...
If you are describing the flex cable that is/was attached to the USB charger board.....then the 'inadvertent detachment' is likely the cause of your issues......
First, the damage that *has* taken place is likely to have caused a lack of charge reaching the battery....which is likely the reason the phone won't boot....dead battery and no way to charge it.
Second, it's likely the PC isn't installing the drivers as the damage caused is probably stopping the PC recognising the phone for what it is.....we all know PC's are dumb, if they're not told exactly how to do something, they just sit there scratching their metaphorical heads....lol
Repairing this part is *highly unlikely* to succeed........the only option....get another replacement.... the only saving grace......they're not that expensive......
Sent from my GT-I9100 using Tapatalk
I very much doubt you have anything to say to me in PM that would be 'worth my interest'. However, if you still believe that to be the case, this thread is as good a place as any to say it.
doctor_droid said:
something worth ur interest...
Click to expand...
Click to collapse
Maybe its the winner of the next Melbourne Cup..........
MistahBungle said:
I very much doubt you have anything to say to me in PM that would be 'worth my interest'. However, if you still believe that to be the case, this thread is as good a place as any to say it.
Click to expand...
Click to collapse
just wanted to ask u whether u would be interested for getting a RC title..if yes then would have nominated u to the committee .
u really thought i would ask u for investing money
Thankyou for the offer, that's very kind of you to think of me that way & I do appreciate it But no, I'd rather not, thanks.
Why not ? You might be a gambling guru for all we know
doctor_droid said:
just wanted to ask u whether u would be interested for getting a RC title..if yes then would have nominated u to the committee .
u really thought i would ask u for investing money
Click to expand...
Click to collapse
MistahBungle said:
Thankyou for the offer, that's very kind of you to think of me that way & I do appreciate it But no, I'd rather not, thanks.
Why not ? You might be a gambling guru for all we know
Click to expand...
Click to collapse
k mate ..its ur decision c ya around here itself till my s2 lives...
keithross39 said:
If you are describing the flex cable that is/was attached to the USB charger board.....then the 'inadvertent detachment' is likely the cause of your issues......
First, the damage that *has* taken place is likely to have caused a lack of charge reaching the battery....which is likely the reason the phone won't boot....dead battery and no way to charge it.
Second, it's likely the PC isn't installing the drivers as the damage caused is probably stopping the PC recognising the phone for what it is.....we all know PC's are dumb, if they're not told exactly how to do something, they just sit there scratching their metaphorical heads....lol
Repairing this part is *highly unlikely* to succeed........the only option....get another replacement.... the only saving grace......they're not that expensive......
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Thought as much but only just got back on here. Thanks for your time. Already ordered the bits that all arrived today ( except I missed the bloody posty )
So I will let you know how my soldering skills hold up after years of being dormant! The board itself seems fine... just kicking myself for giving it that little pull and forgetting that the power button is stuck on. Doh!! The phone is my old one and now belongs to the Mrs... wasn't too happy with me lol. So much so, and I'm sorry to say she switched to the dark side.. iPhone.
Now I think I'll see what ROMs are good for the s4... easy rooted it from day one but now I feel ready for a change. First android I've never completely changed
Sent from my GT-I9505 using XDA Premium 4 mobile app
Ok so I reattached the parts.. but still won't boot up. I plug it into the laptop and connect to Odin.. the id:com turns blue and unknown upload mode is on screen... but it just hangs and does nothing any ideas?
Sent from my GT-I9505 using XDA Premium 4 mobile app
Q&A for Another sony secret revealed... Now it is qc 2.0 !!!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Another sony secret revealed... Now it is qc 2.0 !!!. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
@niaboc79 it wil be a great improvement in Existenz Y 3.0
Ya i am trying to port the rom, so far, i have done almost 90%, now trying to fix the wifi, lol i dont know, how many times i have reflashed my phone..!!
There are two problems, wifi is one.. And other is data connection.. Btw.. I will fix it soon.. Hope so.
Auto detect qc 2.0
Because i have less than 10 post, so i don't have permission to reply thread.
I search google and see it.
https://gerrit.slimroms.net/#/c/23432/1/rootdir/etc/init.qcom.rc
Hope can support.
Sorry for my bad English.
---------- Post added at 10:04 AM ---------- Previous post was at 09:58 AM ----------
Code:
# Quick Charge 2.0 daemon
setprop persist.usb.hvdcp.detect "true"
service hvdcp /system/bin/hvdcp
class core
user root
group root
disabled
# Quick Charge 2.0
on property:persist.usb.hvdcp.detect=true
start hvdcp
on property:persist.usb.hvdcp.detect=false
stop hvdcp
Edward_Newgate said:
Because i have less than 10 post, so i don't have permission to reply thread.
I search google and see it.
https://gerrit.slimroms.net/#/c/23432/1/rootdir/etc/init.qcom.rc
Hope can support.
Sorry for my bad English.
---------- Post added at 10:04 AM ---------- Previous post was at 09:58 AM ----------
Code:
# Quick Charge 2.0 daemon
setprop persist.usb.hvdcp.detect "true"
service hvdcp /system/bin/hvdcp
class core
user root
group root
disabled
# Quick Charge 2.0
on property:persist.usb.hvdcp.detect=true
start hvdcp
on property:persist.usb.hvdcp.detect=false
stop hvdcp
Click to expand...
Click to collapse
Already tried those... Qc-2.0 is working in its half glory now.. That means z2 now supports qc current at 1700ma, but we have to boost it upto 2300ma.
Super slow
Why does my phone only charge at 850mah if I'm using a 5v 2a Samsung charger? When I tried the stock charger the speed goes down to 600mah... Why am I only getting half of what others are getting? I'm really thinking of switching phones as this is unacceptable. 5 hours to chatge the phone...
there´s no option to have QC 2.0 on locked bootloader?
i´m having issues to unlockl it with flashtool (bootloader unlock allowed: YES) is not the first time i´ve unlocked it, but now flashtool can´t unlock it, i think is windows 10 and have problems with adb drivers compatibility
Budgiemanr33gtr said:
Why does my phone only charge at 850mah if I'm using a 5v 2a Samsung charger? When I tried the stock charger the speed goes down to 600mah... Why am I only getting half of what others are getting? I'm really thinking of switching phones as this is unacceptable. 5 hours to chatge the phone...
Click to expand...
Click to collapse
Ya. It does the same with me. But buy a qc 2.0 charger, u will get 1700 ma chaging with qc hack
---------- Post added at 09:32 PM ---------- Previous post was at 09:31 PM ----------
Migueliyo98 said:
there´s no option to have QC 2.0 on locked bootloader?
i´m having issues to unlockl it with flashtool (bootloader unlock allowed: YES) is not the first time i´ve unlocked it, but now flashtool can´t unlock it, i think is windows 10 and have problems with adb drivers compatibility
Click to expand...
Click to collapse
Ya. Driver support may be the problem. Btw, if u have root, u can do it in terminal, just use the command.
showlyshah said:
Ya. It does the same with me. But buy a qc 2.0 charger, u will get 1700 ma chaging with qc hack
Click to expand...
Click to collapse
So I have to buy a QC charger to charge near the advertised amperage of the stock charger? What kind of bs is Sony up to?
showlyshah said:
Ya. It does the same with me. But buy a qc 2.0 charger, u will get 1700 ma chaging with qc hack
---------- Post added at 09:32 PM ---------- Previous post was at 09:31 PM ----------
Ya. Driver support may be the problem. Btw, if u have root, u can do it in terminal, just use the command.
Click to expand...
Click to collapse
Wich command may I use to unlock it via command on phone? I'm root, so help me please
Install terminal emulator,
Pluggin your qc charger
Open terminal emulator and type
Su (allow su permission)
/system/bin/hvdcp.
Budgiemanr33gtr said:
So I have to buy a QC charger to charge near the advertised amperage of the stock charger? What kind of bs is Sony up to?
Click to expand...
Click to collapse
Sony's Official EP880 charger provides 1.5A
You also have to include the Power the Phone is already using some power, so if you use "Ampere" app to check charging current, then you have to add about 250-400mA depeding on Screen Brightness and CPU load.
Haldi4803 said:
Sony's Official EP880 charger provides 1.5A
You also have to include the Power the Phone is already using some power, so if you use "Ampere" app to check charging current, then you have to add about 250-400mA depeding on Screen Brightness and CPU load.
Click to expand...
Click to collapse
That still only adds up to about 1 Amp... And I'm using a 2A Samsung charger... Both that and the Sony charger charge at around 600-800ma
its done.
Budgiemanr33gtr said:
That still only adds up to about 1 Amp... And I'm using a 2A Samsung charger... Both that and the Sony charger charge at around 600-800ma
Click to expand...
Click to collapse
buddy check the original thread, there have been huge changes. :cyclops:
Hi all, I'm sorry to ask this, I'm using CM12.1 now, is there any hope to using the qc? Does it have any flashable zip to flash? Thank you ?
No big benefit if you don't have a kernel which allows for a higher current than 1.5A
Haldi4803 said:
No big benefit if you don't have a kernel which allows for a higher current than 1.5A
Click to expand...
Click to collapse
yes ,i'm aware about that. that is why ,I ask if there any flashable zip or any kind of mod i can use
Will it work on .232 BL?
The jackos flashable yes, AndroPlus Kernel not yet.
quick charge
Budgiemanr33gtr said:
So I have to buy a QC charger to charge near the advertised amperage of the stock charger? What kind of bs is Sony up to?
Click to expand...
Click to collapse
did u buy qc 2.0 charger?
I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.
Mod please move if in wrong section.
kitila said:
I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.
Mod please move if in wrong section.
Click to expand...
Click to collapse
This is great news. Will make a DIY one again soon.
Ps. Wrong section tho, ask mods to move to accesories or general.
Sent from my SM-G935F using Tapatalk
Heh i used to sell those back in the captivate days... good times
You are in the right Section to me! It's part of recovery, not an accessory in generic sense!
It was also able to reboot the tamper counter before, will it do so with the s7 ?
It'a good that I haven't lost my old USB jig from S2 days
EarlZ said:
It was also able to reboot the tamper counter before, will it do so with the s7 ?
Click to expand...
Click to collapse
That I can not say for sure...until we have root I can't say
shaq1907 said:
It'a good that I haven't lost my old USB jig from S2 days
Click to expand...
Click to collapse
I know right I happen to find mine and gave it a try and it work
Thread moved ok.
Thanks,
Bajanman
Bajanman said:
Thread moved ok.
Thanks,
Bajanman
Click to expand...
Click to collapse
Thank you..
kitila said:
I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.
Click to expand...
Click to collapse
I wasn't around the mod scene back when the S2 was a thing. Could you share with me how you made a very clean jig? The ones I've found can be a bit messy
TehPirate_ said:
I wasn't around the mod scene back when the S2 was a thing. Could you share with me how you made a very clean jig? The ones I've found can be a bit messy
Click to expand...
Click to collapse
i think the one he has is a pre-made one, he bought it like that, I just made one using 3x100kOhms and 1x1kOhm. Didn't worked tho, maybe the usb cord I found collecting dust in the drawer is broken, will try with another cord.
annson08 said:
i think the one he has is a pre-made one, he bought it like that, I just made one using 3x100kOhms and 1x1kOhm. Didn't worked tho, maybe the usb cord I found collecting dust in the drawer is broken, will try with another cord.
Click to expand...
Click to collapse
This was a pre-made one but if I Remer correct it's a 100k resistor contacted to pin 3 and 5.
kitila said:
I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.
Hi, can you upload the video please and if possible, show a link to buy or make the jig.
Thanks in advance
Click to expand...
Click to collapse
@kitila,
I found this topic Googling for this same info, so thanks for reporting that the USB Jig still works with S7!
kitila said:
This was a pre-made one but if I Remer correct it's a 100k resistor contacted to pin 3 and 5.
Click to expand...
Click to collapse
Still got one I made for the S4, it is 300k Ohm (Or the one I made, 3 x 100k Ohm) across pins 4 & 5 (ID & GROUND)
Or easier, buy one for a couple £ on ebay
Thank you for the correction on that I knew it was 100 something
Can anyone confirm that this really works? My S7 seems to be hard bricked
*Detection* said:
Still got one I made for the S4, it is 300k Ohm (Or the one I made, 3 x 100k Ohm) across pins 4 & 5 (ID & GROUND)
Or easier, buy one for a couple £ on ebay
Click to expand...
Click to collapse
Can you point to where on ebay to get one? I can't seem to find the right search terms.
Thanks.
*Detection* said:
Still got one I made for the S4, it is 300k Ohm (Or the one I made, 3 x 100k Ohm) across pins 4 & 5 (ID & GROUND)
Or easier, buy one for a couple £ on ebay
Click to expand...
Click to collapse
good to know, I've got a 1,000 pack of 10k resistors in my desk lol
It's not what you buy its what you build