I'm NEW here please help!!!
I had flash a few official ROM like UtimaRom ,Turkbey and Criskelo with the multi CSC selection option
But after selected the correct CSC "STH" it will make a factory data reset when i dial *#1234# it will still show the default CSC I9300OXFDLI1
Firstly you should search first before posting as it says in the Forum rules.
And secondly download this on your device and change your CSC through this. And yes it will do a factory reset on your device each and every time your change your CSC
Download Link https://play.google.com/store/apps/details?id=com.manniakk.cscselector&feature=nav_result#?t=W251bGwsMSwxLDMsImNvbS5tYW5uaWFray5jc2NzZWxlY3RvciJd
thank you for reply
yes! i had read through all the thread about changing CSC but still can't find the correct answer :crying:
what you mention using the CSC select from the play store , i had did it but Still show me the default I9300OXFDLI1
when i connected to the Samsung Kie ... current firmware show AP:LIB, CP:LIB, CSC:LI1 (STH)
DId it mean i successfully changing my CSC on Galaxy S3 ...?
problem is dialing *#1234# show me default I9300OXFDLI1??
Because i using data plan at singapore scared telco " STARHUB" charging me oversea call or message.
hum sorry to post here but searched for long but didnt found answer for my question.. i want to flash an official JB rom like the polland version but am worried only about CSC.. i live in mauritius and afraid if i flash this version for poland if i can get some strange issues
Related
Alright,
new to the Android world... and have my S2 in hand...
Go to the xda-developer section and look through, and think I'm ready to Flash
however, figured I'd make sure I have stock ROM to back to so I look here:
http://forum.xda-developers.com/showthread.php?t=1075278&highlight=i9100
And I find that I have:
PDA: XWKE2
Phone: XXKDJ
Kernel says 2.6.35.7-i9100XWKE2-CL 187606 [email protected] #2
but my CSC (which I found by getting to the Sellout SMS Service menu) is
GT-i9100LKACOA
Problem is, I cannot find this CSC listed in any of the locations... (think my CSC is LKA based on that menu information)
Am I missing something basic here? (I probably am, and will gladly take the noob slap I deserve)
Would it matter which kernel I go with (think I should use MultiCSC OXXKE2, but that is not a direct match that I can tell, in fact I think it is the next kernel version from OXX to OXW?)
Thanks!
Ross
Pick CSC to match the area /country where phone is in use .
or dont bother with a CSC put your network details in manually if needed .
jje
Type *#1234# and it will tell you your PDA Phone And CSC.
Ok.
Flashed and rooted... the 1234 gave me a completely different CSC than that other menu. Thanks much!
Ross
Hi there, just wondering my friend has brought a Galaxy S2, we brought ours from New Zealand, anyway friend is Japanese and he wants his phone in Japanese language(whole phone interface), when i goto "Settings -> Language & Keyboard -> "Select Language" there is no Japanese language in the selection, is there a way i can install a pack so it shows up in there, or flash the Hongkong firmware that may have the Japanese in the Select Language menu.
thanks
Languages are contained within something called a "CSC"..
Read up on those and find the correct one in the Development section.
(Cant guarantee you there is a japanese one, I would imagine there is though.)
get some multi csc from the forum here.
so, if i find the releavant CSC in the forum, do i use the dial pad method or just use ODIN to flash the CSC by itself
thanks.
mrvtec69 said:
so, if i find the releavant CSC in the forum, do i use the dial pad method or just use ODIN to flash the CSC by itself
thanks.
Click to expand...
Click to collapse
This is the thread your looking for.
OMKF2 firmware supports English/Japanese/Korean language. DCM is the CSC I believe.
when i flash the CSC, i get a error, "cannot acesss vnz csc" when it boots up seems like my csc is locked to the carrier firmware im using. if i flash the OMKF2 that wont add to my binary counter and OMKF2 seems like its for the M202S.
this is the current firmware im running: PDA:XWKE7| PHONE:XXKE4| CSC:VNZKE2
anyone ???
I've read what have been said and went on the other thread where I saw written :
CSC has nothing to do with what languages the firmware supports and it will not add keyboard language support either.
Click to expand...
Click to collapse
mrvtec69 have you been able to find a solution ? As far as I am concerned I would just like a japanese keyboard with which I can write texts that can be read by the recipient.
So far, simeji and all the other downloaded keyboard allow me to write texts in japanese, but those texts appear as "???????" on the recipient's phone and I'm pretty sure that a "native" japanese keyboard would solve the problem.
Hi i purchased a secound hand Galaxy S2
which need's repairing, is there anyway i can check if was factory ulocked or was locked to a network.
many thank's
Nigel
nigel1107 said:
Hi i purchased a secound hand Galaxy S2
which need's repairing, is there anyway i can check if was factory ulocked or was locked to a network.
many thank's
Nigel
Click to expand...
Click to collapse
Hi
I also want to know what is my original firmware and modem version, because I forget to take screenshot of original version and after that I flashed it to many custom firmware version, but I have lag problem in HD video recording and sometime problem with middle button so I want to give it to Samsung service centre so I also need to know my original version and how to flash it , if anyone know let me know please,
btw I buy my phone from dialaphone.co.uk and its unlocked contract phone from O2 UK
Thanks
Urvish
onlinejobwork said:
Hi
I also want to know what is my original firmware and modem version, because I forget to take screenshot of original version and after that I flashed it to many custom firmware version, but I have lag problem in HD video recording and sometime problem with middle button so I want to give it to Samsung service centre so I also need to know my original version and how to flash it , if anyone know let me know please,
btw I buy my phone from dialaphone.co.uk and its unlocked contract phone from O2 UK
Thanks
Urvish
Click to expand...
Click to collapse
You can use a XEU Firmware or the O2 UK Firmware, check the Firmware-Thread here in the Forum =>
http://forum.xda-developers.com/showthread.php?t=1075278
I also have the same problem. I have bought my phone in Switzerland and live in France. I bought my phone on my own (it is not included in any contracts). Can I just take XWKJ2 Firmware from this thread:
http://forum.xda-developers.com/showthread.php?t=1075278
and tick PDA, Phone and CSC in Odin to reset my phone and have it working with Kies?
Easiest way is use an app called "checkfus" from the market. It's free.
Basically checkfus can search the same servers as kies does and find the latest firmware available from your carrier.
Then go to intratechs official carrier firmware thread and download the version that checkfus told you was the latest for your carrier.
Flash this via Odin following intratechs instructions.
Use a USB jig to get rid of any flash counter. Sets it to official firmware with 0 flash counter.
If you want at this stage you can do a wipe if you don't want any data on your phone.
At this point your phone will be as if you just unboxed it. kies should work and everything.
Hope this helps.
Sent from my GT-I9100 using XDA App
I have download and installed checkfus and it is very easy to use
Thank You
Hey, I bought my S2 in TELE2, Croatia, I want to restore stock gingerbread... What should I use? I dont have Market on ICS nor mass storage, so help.
kr1pt said:
Hey, I bought my S2 in TELE2, Croatia, I want to restore stock gingerbread... What should I use? I dont have Market on ICS nor mass storage, so help.
Click to expand...
Click to collapse
If it's a I9100 version this is your thread here
http://forum.xda-developers.com/showthread.php?t=1075278
Sent from my GT-I9100 using XDA App
I have the same question for my I9300 / Galaxy S3.
I'd like to thank all the people that posted an answer, but point out there is no answer.
I want to know if there is any way for me to find out what my original firmware was. And is there a way for a service center to check if the firmware matches the imei or serial number?
As long as its official Samsung firmware(and probably for your region) what do they care.
Sent from my GT-I9100 using xda premium
Kies has this option build-in. Just select initialize device from menu or something like that, than enter you phone serial number and model name and voila.
It will tell you what original factory firmware was preinstalled and even flash it if you like.
i9.0.1.3k galaxy imperator
SirKunon said:
Kies has this option build-in. Just select initialize device from menu or something like that, than enter you phone serial number and model name and voila.
It will tell you what original factory firmware was preinstalled and even flash it if you like.
i9.0.1.3k galaxy imperator
Click to expand...
Click to collapse
I tried this, It says " GT i9100 does not support initialising "
I know my phone is from poland. polish was the default language for my fone. Later my phone got bricked, So I had to flash it. Wen i searched it in here http://forum.xda-developers.com/showthread.php?t=1075278 I saw quite a few firmwares from poland. Tried XXLPQ and XXKI4. But the default language came as English UK . I think I flashed it with wrong firmware. I am confused with which CSC should be used. OXA or XEO .
Is there any chance to find the stock firmware with IMEI and S/N
S/N : RDZB913735Z
can you kindly check for me, wats the official firmware for my phone.
Thanks and Regards.
Allrigt I will check this but don't publish your IMEI here. PM me.
Poland have XEO code. But if phone was branded than it can be operator's code (IDE - Orange, TLP - T-mobile...)
i9.0.1.3k galaxy imperator
SirKunon said:
Allrigt I will check this but don't publish your IMEI here. PM me.
Poland have XEO code. But if phone was branded than it can be operator's code (IDE - Orange, TLP - T-mobile...)
i9.0.1.3k galaxy imperator
Click to expand...
Click to collapse
Thanks man,
Now i am sure its XEO , its unbranded, international version, bought from amazon.com
I'm sorry but Kies can not initialize this phone. This could mean that your phone was not branded and you can flash any official XEO firmware if you want to repair it in Sammys Service Center.
You can flash 4.0.4 immidiatelly with Odin or, if you feel that you absolutly must use Kies to upgrade (don't know why) than flash official 4.0.3 (XXLWP) it is stock for XEO region and after that change your CSC by dialing service code *#272*IMEI# (IMEI - your IMEI number). From pop-up menu choose XEO. Phone will be wiped and new CSC will be set. You can check this in 3e recovery (yellow information text at the bottom) or in Kies - there should be (XEO) at the end of the line with current version information. Than you can upgrade to 4.0.4 via Kies or FOTA.
i9.0.1.3k galaxy imperator
Sorry for bump, is it possible?
BUMP
Hy,
I have a galaxy grand prime G530H and I have accidently deleted the stock rom. Can you tell me plz how can I find the firmware suitable for my cellphone. plz hurry up!
Asfand Yar Khan said:
Hy,
I have a galaxy grand prime G530H and I have accidently deleted the stock rom. Can you tell me plz how can I find the firmware suitable for my cellphone. plz hurry up!
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/database/SM-G530H/
Hi guys.
I flashed a new ROM on my SIII, the stock Vodafone PT rom.
But in a certain moment, I have to change the CSC, and for that I need the app CSC Changer.
I installed CSC Changer, but in the app, it appears many CSC's, but not the one I want (TCL).
How can I sucessfully change my CSC to TCL?
It's the ROM's fault?
Sorry for my bad english.
Cheers
SawadaPT said:
Hi guys.
I flashed a new ROM on my SIII, the stock Vodafone PT rom.
But in a certain moment, I have to change the CSC, and for that I need the app CSC Changer.
I installed CSC Changer, but in the app, it appears many CSC's, but not the one I want (TCL).
How can I sucessfully change my CSC to TCL?
It's the ROM's fault?
Sorry for my bad english.
Cheers
Click to expand...
Click to collapse
*#272*IMEI# (eg. *#272*16546845451#)
to see your IMEI see your settings or dial *#06#
NOTE: Changing your CSC will factory reset your device.
App from market doesn't include any CSC code. It's simply using Stock CSC changer called Preconfig.apk and your ROM must be MultiCSC in order to change it.
We have new ***Sticky - CSC Collection*** Check it out
Hi.
Using the *# code shows exactly the same CSC's.
I don't have my phone rooted, how can I do ?
Cheers.
SawadaPT said:
Hi.
Using the *# code shows exactly the same CSC's.
I don't have my phone rooted, how can I do ?
Cheers.
Click to expand...
Click to collapse
To be clear, you want to change your CSC to TCL but you don't want to root your phone and your CSC is not included in ROM you're using at the moment? Correct? If so, you need to get yourself right ROM from www.samsung-updates.com or www.sammobile.com and flash it with Odin. Later on, you'll get OTA or Kies updates but only if there are any.
Yes, that's correct.
But I already downloaded two VodafonePT (TCL) roms, and there are no signs of TCL CSC..
Cheers.
Mate, I don't know what you want.. If you Must have CSC-TCL, then use Odin and install one of those Vodafone ROMs, that's it.
No other way to change CSC for you.
Installing right now,
Will update soon.
Hi everyone... I got a similiar problem with CSC and maybe someone can help me.
My original S3 is using I9300XXELLA_I9300VFGELL3_OMN fw... earlier i flashed it (after a hard reset) with the english fw, I9300XXEMB5_I9300OXAEMB5_BTU. Now kies says I have a KOR csc (shouldn't it be BTU?) and that i won't be able to upgrade the fw in the future.
But this isn't the problem, I can always update with Odin. Problem is that if i ever have to use warranty, i'll have to flash back the original firmware... and when i'll do so, will i get back the OMN csc or i'll still have it set to KOR?
Thanks in advance for your help.
All working.
Thanks :=)
can't change CSC
Hi guys,
I need some help here.
I'm trying to change my CSC to the correct one, because apparently my phone is not recognizing my zone (my clock is displaying the wrong time... is that a problem from CSC?).
I do the *#272*IMEI and nothing happens.. ideas?
cheers
Carlos
Hi i have problem whith CSC on my GT i9300 i have installed Omega 44.3 Rom becouse had Multi CSC but i cant change it. When i try to change its still on EUR after i type install whith CSC Changer For Samsung S/S2/S3 it reboots,Wipe data and is still there in CSC EUR? I have also tryed another modem whith stock 4.1.2 rom but also doest work. I dont know who was my first rom (4.0.4) and dont know my stock CSC. I have the original Box But doesnt help me to much to find the Origin. Any sugestion how to fix this? Thanks
Which country do you live in? and what provider?
Maybe you should check this thread to look for and change csc without wiping
http://forum.xda-developers.com/showthread.php?t=2198512
Sent from my GT-I9300 using Tapatalk 2
If the phone works don't bother trying to change CSC .
jje
Im in Albania whith Vodafone Carrier. My Phone Box say its from Serbia to be sell in Austria, its Sim Free. But when i open original Browser there are Serbian or Croatian Bookmarks( maybe this help . So i dot know what CSC my phone originally had. Thanx
When you checked to see if the csc had changed, did you go via the dialler(*#1234#) or did you check via the csc changer app?
There has been problems where the dual dialler method doesn't report properly
I try whith CSC changer. But anyway i didnt have network , so i now that doesnt work.
One thing, FACTORY RESET from phone settings! Full wipe from recovery doesn't work properly. TESTED!
Use a update.zip from here and it'll work. Guaranteed!
Thnx i will try.
But which CSC is for me?
CSC_ALB including Vodafone Albania..
It should change your CSC without F.Reset though