Hello,
I have a Motorolla Atrix 4G purchased from Bell. The phone was updated to Gingerbread 2.3.6 already.
I have rooted the phone following this guide http://androidadvices.com/root-motorola-atrix-4g-45141-gingerbread-236-firmware/
Using the moto-fastboot files from here http://www.android-advice.com/file-downloads.php?filename=Atrix_Root_Files
I'm trying to unlock the bootloader so I can ultimately install CM7, but my understanding from this forum sticky http://forum.xda-developers.com/showthread.php?t=1160408 is that I can't do this without bricking the phone, since I had already done the official gingerbread update.
So if I'm correct, I need to follow this guide... http://forum.xda-developers.com/showthread.php?t=1302423
Except that guide and the warning sticky are referring to 2.3.4, not 2.3.6...
Could someone please lend me some knowledgeable input and/or guidance on this? Greatly appreciated, and thank you for your time.
Solved my own question. Phone is unlocked and functioning.
To anyone else who might be helped by this, that guide I posted DOES work for 2.3.6 on Bell... Even says so approx. 13 pages into the discussion (took me awhile to find it).
Just like to thank this community for existing, and all the effort and time you guys spend to not only develop, but to help others by publishing these great resources.
Related
First of all I did search for and did find a lot of info about unlocking my BL, But thats just it theres so much, just didn't really understand which one..lol
Obviously I have the Motorola Atrix 4G, lol..good old Florida AT&T my build is OLYFR_U4_1.8.3 Android 2.2.2 And yes it is rooted..
Could someone plllllzzz..list a step by step on how to unlock my bootloader, and how to install Gingerbread 2.3.4 i think it is...thx sooooo much as I'm sure you guys have a lot of other stuff to work on....I would be most gratefull
go to android developer section for atrix 4g---use international pudding thread.
you can find it and for gb upgrade their is video posted in general section.
hope this helps.
mojo7 said:
First of all I did search for and did find a lot of info about unlocking my BL, But thats just it theres so much, just didn't really understand which one..lol
Obviously I have the Motorola Atrix 4G, lol..good old Florida AT&T my build is OLYFR_U4_1.8.3 Android 2.2.2 And yes it is rooted..
Could someone plllllzzz..list a step by step on how to unlock my bootloader, and how to install Gingerbread 2.3.4 i think it is...thx sooooo much as I'm sure you guys have a lot of other stuff to work on....I would be most gratefull
Click to expand...
Click to collapse
heres my guide will take you from a to z stock to 2.3.4 boot loader unlock the whole deal! if u see anyone with a similar thread or question be so kind to post it on there thread because there is now a video. hope this helps pm me if any issues
http://forum.xda-developers.com/showthread.php?t=1179506
Hi there, I am looking for a step by step guide for Bell users who are stock 2.3.4 and looking to root, unlock, change roms etc. The problem is, I'm currently having trouble finding this information. I am coming from a Nexus One, and then a Desire Z, where the process was much easier.
When I search around, I find conflicting ways to do this, with separate instructions for the Bell Atrix vs the other versions. I know we don't have a Bell Atrix section, and I tried searching but couldn't find anything other then this here. Can anyone confirm these are the steps to make this work?
When I figure this out I will write a definitely write a guide for us Bell users. Thanks!
For unlocking, I've seen multiple Bell posts confirming that IHOP (international house of pudding works).
I'm on my phone so I don't have the link handy, but its in the dev section...
Sent from my GT-I9000 using xda premium
guitar_east said:
Hi there, I am looking for a step by step guide for Bell users who are stock 2.3.4 and looking to root, unlock, change roms etc. The problem is, I'm currently having trouble finding this information. I am coming from a Nexus One, and then a Desire Z, where the process was much easier.
When I search around, I find conflicting ways to do this, with separate instructions for the Bell Atrix vs the other versions. I know we don't have a Bell Atrix section, and I tried searching but couldn't find anything other then this here. Can anyone confirm these are the steps to make this work?
When I figure this out I will write a definitely write a guide for us Bell users. Thanks!
Click to expand...
Click to collapse
First of all, welcome to the community of freedom and awesomeness. LOL.
What version of Android did your Bell Atrix come with?
http://forum.xda-developers.com/showthread.php?t=1136261
I don't/can't remember off top of my head if there was anything else I did besides everything explained in Pudding section, but I can confirm that those steps work.
Also, those steps mentioned in the link you provided also looks very similar and should also work.
I think I have those forums bookmarked somewhere on any of my computer, will look it up and see if I can find, I will update this post. Besides, Pudding method works. If you want to try, go ahead.
Cheers!!!
creativedevil said:
What version of Android did your Bell Atrix come with?
Click to expand...
Click to collapse
It came with stock 2.2.2, and updated with the OTA last week to the 2.3.4
I'll try the IHOP steps and put together a guide for Bell users if all goes well, thanks!
I've asked the same question too, but I've posted it on a different website. If mods here allow it since it's related to the topic, i've provided a link below. I asked this question just yesterday on Atrixforums and I put up a general list/steps as to how you can get from stock 2.3.4 Bell Atrix to be able to install custom ROMs. Can other people verify if this list is correct?
Thanks
---
Used this for rooting and confirmed works on my Bell Atrix 2.3.4: briefmobile.com/motorola-atrix-4g-root/
Made a forum thread about the steps to install custom ROMs from stock: atrixforums.com/forum/motorola-atrix-help/5590-q-verifying-steps-installing-custom-rom-onto-my-bell-atrix-2-3-4-rooted.html
---
EDIT:
I've just done this and I can confirm that this works! I now have an unlocked bootloader.
h33t said:
I've asked the same question too, but I've posted it on a different website. If mods here allow it since it's related to the topic, i've provided a link below. I asked this question just yesterday on Atrixforums and I put up a general list/steps as to how you can get from stock 2.3.4 Bell Atrix to be able to install custom ROMs. Can other people verify if this list is correct?
Thanks
---
Used this for rooting and confirmed works on my Bell Atrix 2.3.4: briefmobile.com/motorola-atrix-4g-root/
Made a forum thread about the steps to install custom ROMs from stock: atrixforums.com/forum/motorola-atrix-help/5590-q-verifying-steps-installing-custom-rom-onto-my-bell-atrix-2-3-4-rooted.html
---
EDIT:
I've just done this and I can confirm that this works! I now have an unlocked bootloader.
Click to expand...
Click to collapse
Thank you. I'll give it a shot and post my results
step by step
Hey guy, i'm on bell and this is what i did and i have had no problems.
Pt 1. http://www.youtube.com/watch?v=jPQzZOj0-BA
Pt 2. http://www.youtube.com/user/TheSmokingAndroid#p/u/4/BYM-YeSH22o
Pt 3. http://www.youtube.com/user/TheSmokingAndroid#p/u/3/CwJGetPHlzE
Pt 4. http://www.youtube.com/watch?v=IcgvglaXLyM
Pt 5. http://www.youtube.com/watch?v=CzFhKFeTBuM
Just make sure you use the right kernel for the rom.
Well, managed to get rooted, bootloader unlocked, booted into recovery, and flashed Gobstopper 2.3.4 with the fixes. It worked good. Then I figured I'd try CM7...
Didn't work out
Gave me a build.prop error. So I wiped the cache, dalvik, erased data, and did a restore (glad I did that backup).
Now, I seem to be stuck in a boot loop. Luckily, I can still access fastboot, and the recovery and such. I'll try flashing the original IHOP file again in RSD lite
* edit - that worked!
The YouTube video worked perfectly, with the exception of explianing how to root. A user posted that in this very thread, so I guess theres no need to write a guide since those video's are good.
Thanks to all who helped!
Hi everyone,
I'm a complete noob when it comes to this stuff. Recently, my phone has been running really slow, and I remembered people saying that rooting and flashing custom roms will help increase the efficiency of the phone. I've been looking through tons of threads and countless google searches trying to find a tested and working method for BL unlock and root for a stock MB860 on Android 2.3.6 -- 4.5.145. Yet I haven't found anything. Can I get some suggestions/help? Thanks.
PS - I plan on getting the SGS4, but till I see some actual benchmarks/comparisons between the two chipsets that they phone is shipping with, I'll have to rely on my Atrix 4G. And right now, as I said earlier in the post, it's acting extremely sluggish in every sense of the word.
-Pat
check this out yet?
http://forum.xda-developers.com/showthread.php?t=1302423
robyn402 said:
check this out yet?
http://forum.xda-developers.com/showthread.php?t=1302423
Click to expand...
Click to collapse
Wow thanks. Everyone posting on there says it's real easy to use. Unfortunately no one has system version 4.5.145 like I do. I'm not sure how important that actually is but I have read that version does matter. But it is nice to see people have used it successfully used it with 2.3.6. I posted on that thread and am waiting for a response. Thanks again.
Hi there.
I am trying to find instructions of how to root my Motorola Atrix 4G, but I can't find any solution for Android 2.2.2. I found a couple of how-tos describing the steps for android 1.8-4.5, not 2.2.2 tho. For example: http://forum.xda-developers.com/showthread.php?t=1182871 which looks to be the easiest way to do it.
Does anyone have any idea/hint to give me? I am a complete noobie that has been reading about it for like a week already.
BTW, I appreciate any hints for how to flash custom ROMs and any good ROM, I am think about the epinter one (http://forum.xda-developers.com/showthread.php?t=2060064).
Thanks!
Obviously you haven't been reading the right stuff.
http://forum.xda-developers.com/showthread.php?p=40695307#post40695307
I know there are a thousand threads on Rooting/Unlocking and Custom ROM's for the Atrix, because I've spent the last 3 days reading every one I could find. However, most of them appear to be very dated and often conflicting. As I'm coming to the game a little late I was hoping for some assistance on how to proceed.
Here's what I have;
AT&T Motorola Atrix 4G (I bought this new under contract, kept it for 2 years, upgraded to another phone and this one has been a paperweight for the past 18 months) AT&T will give me an unlock code if I ask, but I'm a little confused by the conflicting reports on whether to do it this way or not.
It's an MB860
FW Version 4.5.141
OS Version 2.3.6
Baseband N_01.77.37P
Webtop WT-1.2.0-110_OLY-6
Kernel Version 2.6.32.9
Build 4.5.141
I'd like to Unlock it so I can run a Foreign SIM card, I'd like to Root it so I can add non-approved apps, and I'd like to play with some ROM's, Redpill has some very good user reviews so I'm thinking of giving it a try but I'm not stuck on it.
Obviously don't want to brick the phone, so any advice would be appreciated, the more detailed the better
I have Windows 8.1, Mac OS X, and Windows XP-SP3 computers to work with.
Thanks in advance for any assistance.
While certain threads are (or might seem) outdated and/or conflicting, there are also other threads that serve as a kind of index of the most current methods and procedures. That should help you get around. Plus there are threads and guides written especially for noobs...
Yes, the code from AT&T is the safest and simplest way to do SIM unlock. Only important point here is that the device must be running the official Moto/AT&T firmware at the time of unlock. I'm not sure what kind of "conflicting information" you came across, to my knowledge nobody who's used the code as described never had any problems.
As for rooting, regardless of the variant or firmware version of your device, the preinstall method is the one to use. By far the most universal, plus personally and generally I dislike any "automatic", "one-click" or similar methods - for me at least they are usually more trouble than they're worth.
As for playing with ROMs, you first need to unlock your BL, then install a custom recovery, and then you have a shot at ROMs. So quite a wide topic with plenty enough threads created on the subject, so no point in repeating what's already said countless times. By the time you're done with other things mentioned (SIM unlock, rooting) you should be able to find your way around.
Sequence
ravilov said:
While certain threads are (or might seem) outdated and/or conflicting, there are also other threads that serve as a kind of index of the most current methods and procedures. That should help you get around. Plus there are threads and guides written especially for noobs...
Yes, the code from AT&T is the safest and simplest way to do SIM unlock. Only important point here is that the device must be running the official Moto/AT&T firmware at the time of unlock. I'm not sure what kind of "conflicting information" you came across, to my knowledge nobody who's used the code as described never had any problems.
Click to expand...
Click to collapse
Thanks for the quick reply. I've requested an unlock code from AT&T, should be good to go in 48 hours.
In the mean time, is it important that I have it unlocked before I root, or will it matter?
Update
I realize this may seem to be off-topic but I'm not asking for assistance with this newest update, I'm only using the experience to help clarify my concerns about the Atrix.
Waiting for my requisite 24 hours before unlocking the SIM on my Moto Atrix. While I'm waiting i decided to gain a little experience by rooting a Galaxy S5570 and installing a custom Rom.
Like the Atrix there are dozens if not hundreds of threads, videos, tutorials etc for how to accomplish this. I found the most recent one I could that seemed to be a complete tutorial and it was dated from January of this year (much newer than any threads I've found on the Atrix BTW)
Rooting went fine. Confirmed with a Root Test app.
Loaded a CWM 6.0.4.5 recovery package as instructed and ended up bricking the phone. By all accounts this tutorial was for the exact model of phone with the exact same FW and Android version.
This is no big loss as it was a cheap phone that I wasn't using anyway, but it certainly opened my eyes to the risks involved in attempting this procedure on the more costly Atrix.
I'd really appreciate if anyone could point me in the direction of a current procedure for Rooting, Unlocking the Bootloader and installing a custom ROM on the Atrix with the specs from my Original Post. If any of you have the same phone and had success following a particular procedure I would greatly appreciate some links.
I know how forums work, and I know there are always the guys that reply RTFM to every noobs questions, as someone with technical skills in other areas I can generally tell the difference between someone who just doesn't want to bother doing the Due Diligence and someone who is struggling to sort through the myriad solutions to find the one that's right. I really don't want to brick this phone so any pointed advice would be greatly appreciated.
arkansascontrols said:
I realize this may seem to be off-topic but I'm not asking for assistance with this newest update, I'm only using the experience to help clarify my concerns about the Atrix.
Waiting for my requisite 24 hours before unlocking the SIM on my Moto Atrix. While I'm waiting i decided to gain a little experience by rooting a Galaxy S5570 and installing a custom Rom.
Like the Atrix there are dozens if not hundreds of threads, videos, tutorials etc for how to accomplish this. I found the most recent one I could that seemed to be a complete tutorial and it was dated from January of this year (much newer than any threads I've found on the Atrix BTW)
Rooting went fine. Confirmed with a Root Test app.
Loaded a CWM 6.0.4.5 recovery package as instructed and ended up bricking the phone. By all accounts this tutorial was for the exact model of phone with the exact same FW and Android version.
This is no big loss as it was a cheap phone that I wasn't using anyway, but it certainly opened my eyes to the risks involved in attempting this procedure on the more costly Atrix.
I'd really appreciate if anyone could point me in the direction of a current procedure for Rooting, Unlocking the Bootloader and installing a custom ROM on the Atrix with the specs from my Original Post. If any of you have the same phone and had success following a particular procedure I would greatly appreciate some links.
I know how forums work, and I know there are always the guys that reply RTFM to every noobs questions, as someone with technical skills in other areas I can generally tell the difference between someone who just doesn't want to bother doing the Due Diligence and someone who is struggling to sort through the myriad solutions to find the one that's right. I really don't want to brick this phone so any pointed advice would be greatly appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1302423
I just did it with my old A4G. No issues exist in procedure.
Motorola Atrix KCC-MB860- rom
please anyone send me a link to download rom for this model (Motorola Atrix 4G KCC-MB860- rom)
manoj panay said:
please anyone send me a link to download rom for this model (Motorola Atrix 4G KCC-MB860- rom)
Click to expand...
Click to collapse
Meanwhile you have ROMs all over the place here in the Atrix 4G section of xda that you are not going to go download, rather you are going to request a ROM for the phone instead. Head over to the development section and download a ROM instead of requesting the necessary resources that are already available to you.
Sent from my ATRIX HD using XDA Free mobile app
help me recover my phone
i downloaded and tried to flash with lots of rom.... non of them was working with this model .... please help me. . . . i was rooted and unlocked the boot loader and erased the original rom to flash the downloaded rom . . . know non of the rom in this site is working and in my phone only hardware is remaining, i mean it is not bricked , i can boot it and i can go to fastboot mode, android recovery mode, rsd mode,, atc.... actually i want suitable ram for that model so please......
my phone model: kcc-cmm-mot-w-mb860-0211 ( and all the remaining thing are written in Chinese ) it is a unlocked phone and am using in india . . .