I created this thread because I have looked all over and have been unable to find someone with the exact same issue(s).
I said "sort of" in the title because twrp is working. Ok, so before everyone asks if I have nvflash, the answer is no. I did not have the right version of firmware, and did not try to install it originally. Since I was able to install roms, I figured I was fine...oops.
Twrp is not properly installing roms. More on that later. I am getting to the asus splash screen that says my device is unlocked, but it is stuck there.
My last working rom was the deodexed stock JB rom from craig gomez. I installed it with goo and when I installed that, I lost custom recovery and root, so I decided to go back to a more custom rom so Titanium backup would work. When I did that, I tried also tried again to make nvflash work. I got through the first step, it said it was successful, except I never got the little message in the upper left corner that I was supposed to get. I did not think it was a big deal because my prime would still boot like normal.
Then I installed twrp 2.3.1.0 and I have tried flashing previous restore images. I have tried installing the roms on my sdcard. I cannot get past the asus splash screen.
If I try installing a rom with the force md5 check enabled, it does detect an md5 and then quits.
If I try intalling a rom without the force md5 check, i get an error that says E:Unable to mount '/staging'
When I try installing a backup everything seems to work okay, but then I get the same error E:Unable to mount '/staging'
When I try to install roms through fastboot, I get the following errors:
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
When I try using adb, I do not see any devices.
I tried putting CWM on the prime to see if I could install from that instead, but it would not load after install.
I tried putting an older version of twrp on the prime, to see if that was the issue because I used to have an older version...I could not get that to load either...so I went back to this version.
Any ideas or suggestions would be awesome guys. I am stuck.
I even went to install the naked drivers again, and when I try to flash a different recovery, I get the <waiting for device> text that never goes away.
i'm sort of on the same boat. my prime just keeps booting into twrp recovery no matter what i tried. i'm still hoping to find a solution to this problem.
godlyitem said:
i'm sort of on the same boat. my prime just keeps booting into twrp recovery no matter what i tried. i'm still hoping to find a solution to this problem.
Click to expand...
Click to collapse
For me, I can let it try to boot normally, but I get stuck at the splash screen. This device is unlocked.
If I hold down the volume down button, I can go to fastboot, or RCK for recovery...but it does not work properly.
big time noob said:
For me, I can let it try to boot normally, but I get stuck at the splash screen. This device is unlocked.
If I hold down the volume down button, I can go to fastboot, or RCK for recovery...but it does not work properly.
Click to expand...
Click to collapse
i just tried to flash cwm in the terminal, it wrote stuff on the memory, but didn't seem to do anything. it booted straight back to twrp. i can't even get it to go to fastboot!!! only if i can go to fastboot, i could save my prime!!!
godlyitem said:
i just tried to flash cwm in the terminal, it wrote stuff on the memory, but didn't seem to do anything. it booted straight back to twrp. i can't even get it to go to fastboot!!! only if i can go to fastboot, i could save my prime!!!
Click to expand...
Click to collapse
Yeah, I thought that too, but fastboot does not work properly either...argh. I wish one of the gurus would chime in here.
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
EDIT: Guys I did a prime fullwipe and flashed stock jb and now prime is restored to its original state..
""I also got some errors like md5 file could not be found and could not find the /staging""..but after the reboot it works perfect
EDIT 1: Now after the prime fullwipe and flashing stock jb i flashed twrp recovery and now it works perfect without a single error even the above mentioned errors were gone
mercydia said:
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
Click to expand...
Click to collapse
EVERYONE i fixed it!!!!!!!!!!!!!!!!!! !!!! it's alive again!!!!!!!!!!!!!!!!!
godlyitem said:
EVERYONE i fixed it!!!!!!!!!!!!!!!!!! !!!! it's alive again!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
That doesn't really help us. If possible, can you edit/delete your message so that the guys that might help do actually help? Don't want them to think this is done.
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
mercydia said:
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
EDIT: Guys I did a prime fullwipe and flashed stock jb and now prime is restored to its original state..
""I also got some errors like md5 file could not be found and could not find the /staging""..but after the reboot it works perfect
EDIT 1: Now after the prime fullwipe and flashing stock jb i flashed twrp recovery and now it works perfect without a single error even the above mentioned errors were gone
Click to expand...
Click to collapse
big time noob said:
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
Click to expand...
Click to collapse
here is what i did. get into twrp recovery. flashed full prime wipe -> right after that flash the stock jb US version directly dled from Asus -> reboot then you will be stuck at the splash screen (that's a good news). Hold down power + volume down until your prime turns off and restart (keep holding those two keys) until the 3 icons appear then flash w/e rom you want in recovery. It's alive!
In twrp I do not see anything that says Full Prime Wipe. I see something that says wipe. Are those the same? I tried doing a wipe from this screen, but it did not work for me as expected.
godlyitem said:
here is what i did. get into twrp recovery. flashed full prime wipe -> right after that flash the stock jb US version directly dled from Asus -> reboot then you will be stuck at the splash screen (that's a good news). Hold down power + volume down until your prime turns off and restart (keep holding those two keys) until the 3 icons appear then flash w/e rom you want in recovery. It's alive!
Click to expand...
Click to collapse
big time noob said:
In twrp I do not see anything that says Full Prime Wipe. I see something that says wipe. Are those the same? I tried doing a wipe from this screen, but it did not work for me as expected.
Click to expand...
Click to collapse
no full wipe is a stand alone zip file you have to google and find dl it. put it in your prime then flash it
Thanks. That is what I needed to know.
I will see if I can make this work when I get back from work.
godlyitem said:
no full wipe is a stand alone zip file you have to google and find dl it. put it in your prime then flash it
Click to expand...
Click to collapse
I am pretty sure I am F***ed.
I tried the prime full wipe. It worked the first time, I think. Then went to install a rom.
I had to do both through external SD in twrp because my adb is not working. Also, fastboot only works to install a recovery. The only version of any recovery I can make work is twrp 2.3.1.0
If I try an older version or CWM, it freezes where I try to go into recovery.
Unable to mount data error.
Unable to mount system error.
Same as before.
I tried using unbricker software I found, but since adb does not work properly, the software does not work properly.
I am going to see if I can work my charm and get them to take back my tablet at best buy for an infinity. I have read about other people pulling it off.
I think as we get closer to xmas my odds improve...UNLESS SOMEONE HAS ANOTHER IDEA??? I would love to try something else.
Eyeballer suggested a chat room channel thing, but most of the people are in europe and I would need to do it in the morning...I do not have time for that, but I may try it.
big time noob said:
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
Click to expand...
Click to collapse
Download the zip:
http://goo.gl/hiFHB
Goto to Twrp recovery and install the zip..Since it supports microsd u can transfer the zip to microsd.
Goto TWRP -> INSTALL -> CHOOSE EXTERNAL SD -> INSTALL THE ZIP
It will completely wipe the internal storage and then download the official STOCK JB FROM ASUS SITE and follow the same steps to install. Now install the latest twrp recovery using fastboot
big time noob said:
I am pretty sure I am F***ed.
I tried the prime full wipe. It worked the first time, I think. Then went to install a rom.
I had to do both through external SD in twrp because my adb is not working. Also, fastboot only works to install a recovery. The only version of any recovery I can make work is twrp 2.3.1.0
If I try an older version or CWM, it freezes where I try to go into recovery.
Unable to mount data error.
Unable to mount system error.
Same as before.
I tried using unbricker software I found, but since adb does not work properly, the software does not work properly.
I am going to see if I can work my charm and get them to take back my tablet at best buy for an infinity. I have read about other people pulling it off.
I think as we get closer to xmas my odds improve...UNLESS SOMEONE HAS ANOTHER IDEA??? I would love to try something else.
Eyeballer suggested a chat room channel thing, but most of the people are in europe and I would need to do it in the morning...I do not have time for that, but I may try it.
Click to expand...
Click to collapse
When I was doing the fullwipe the same errors happened to me.. But dont mind..I got errors like
1. No md5 file found
2. Mount error
3. Cannot find /staging
Just follow the above the steps ull get it right
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
godlyitem said:
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
Click to expand...
Click to collapse
Yeah, I should have said I tried that first. I also tried the stock rom from asus. When that didn't work, I tried the stock rom deodexed I found in goo.
There are a bunch of permission errors going on inside my prime. When I go into the mount area, it will not let me mount the data to move it. Or, when I try to copy it over I get a failed message.
Okay. I wiped it again, from twrp.
Then it let me move the file from the ext-sdcard to the sdcard.
I used the prime full wipe.
Then I tried to install the stock rom by transferring it in twrp file manager.
I got the file onto the sdcard, but when i tried to install, it said Failed.
That was it.
I even tried installing the ICS version I got from ASUS. Same thing.
Now, I am going to try to access via unbricker...don't know if it will work, but I am out of ideas.
godlyitem said:
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
Click to expand...
Click to collapse
Fixed?
I am alive!
us-tf201-jro03c-10.4.2.15-stock-deodexed.zip
That is the last rom I successfully used.
I used all sorts of different wipes. I was in twrp and noticed my pc installing the transformer adb driver. So I hopped into adb to see if it would see my device with that driver. (it did, but it wasn't before from the fastboot or adb commands with naked driver).
I tried sideloading the above rom from twrp. It worked.
Thought others might want to know.
I do not know if I can install other roms or not. I am a little scared to try just yet.
big time noob said:
Okay. I wiped it again, from twrp.
Then it let me move the file from the ext-sdcard to the sdcard.
I used the prime full wipe.
Then I tried to install the stock rom by transferring it in twrp file manager.
I got the file onto the sdcard, but when i tried to install, it said Failed.
That was it.
I even tried installing the ICS version I got from ASUS. Same thing.
Now, I am going to try to access via unbricker...don't know if it will work, but I am out of ideas.
Click to expand...
Click to collapse
big time noob said:
I am alive!
us-tf201-jro03c-10.4.2.15-stock-deodexed.zip
That is the last rom I successfully used.
I used all sorts of different wipes. I was in twrp and noticed my pc installing the transformer adb driver. So I hopped into adb to see if it would see my device with that driver. (it did, but it wasn't before from the fastboot or adb commands with naked driver).
I tried sideloading the above rom from twrp. It worked.
Thought others might want to know.
I do not know if I can install other roms or not. I am a little scared to try just yet.
Click to expand...
Click to collapse
You will have the jelly bean bootloader now so as long as you stick to it you should be fine. The only other thing I would suggest is check you version of twrp, you should be running the jelly bean version of it also. And if I am not mistaken, you need to be on ics to use nvflash (although I haven't checked the op recently so I could be wrong) so definitely stay away from that unless you downgrade.
Related
I've searched and can't seem to find exactly what I'm looking for so a little help would be awesome. I unlocked, rooted, installed TWRP, created backup, then flashed AOKP's Build 39 to Prime. It was rebooting then entering boot loop. I went into TWRP and after some misunderstandings WIPED SYSTEM DATA. Now I think I'm screwed. When you turn it on it enters Eee Pad screen and stays. I can manually enter TWRP and also the Fastboot screen (which is where I think I can fix this thing) but I have no idea what to do next. I am searching but still haven't found the right answer. If anyone has a clue please give me your insight, I'm pretty unsure of what move I should make next. Thanks!
Also, I'm pretty sure I need to push files using ADB/Fastboot... Is this correct and if so which files will I need to push...
I do have ROM/Gapps on external SD but of course that isn't booting, FYI.
Just flash aokp again and factory reset in twrp
Sent from my sgs2 running cm9
Makrilli said:
Just flash aokp again and factory reset in twrp
Sent from my sgs2 running cm9
Click to expand...
Click to collapse
___
How can I flash the AOKP ROM again if I can't seem to find it within any directory? See that's my issue, I don't have the zip file anywhere when I use File Manager within TWRP Recovery. I think the only thing left on my Prime is the boot img for TWRP, nothing else. I need to know how to push the ROM back onto the Prime... Keep in mind I don't have a way to boot the system because I wiped the system.
I have the Evo LTE S-on (HTC bootloader unlocked) and TWRP installed. The only problem I'm having is that I cannot seem to get .zip files to open from the install menu in TWRP (recovery). I factory reset and try to open the zip from the install menu but it just says "Failed". Specifically I am trying Kushdeck's new CM10 ROM. Any help would be greatly appreciated. Thanks.
PS. Not sure if this will help but on the install menu my files show up twice, the first time with the normal naming and the second with "/." in front of them.
Did u try and re download it again? Sounds like a bad DL if it keeps failing after a couple of attempts
Sent from my EVO using Tapatalk 2
Ok I'm trying that now. I'm also wondering if there's a problems with my /ext-sd because everytime I factory reset it says it couldn't access that. Do you think that has anything to do with it? Is reinstalling TWRP an option?
Ok thanks so much the re-download did it. But now I'm at a black/blank screen after start up. I factory reset, installed the CM10 ROM then Gapps and wiped the dalvik/cache. Then when I reboot it just goes to the HTC screen and after that nothing. Ideas?
This is going to sound strange but try factory restet, wipe cache/dalvik and then just reboot without trying to flash anything.. I've been having some similar issues as mine isn't recoglizing any MD5 when i try to flash a new rom.. I wiped my phone and have tried to flash a few roms and it fails every time and in wiping my phone it somehow took out my backup so without any other options (that I knew of) I just rebooted and luckily it loaded a completely bare vipor rom like what I started out with when I originally rooted.. BTW, did you create a backup before trying to flash? Should always make a backup....
Ya I had backed up. Turns out I needed to manually flash the boot.img which fixed the issue
elitelimfish said:
Ya I had backed up. Turns out I needed to manually flash the boot.img which fixed the issue
Click to expand...
Click to collapse
Thanks for this. I had the same problem, (S-ON, TWRP. black screen on boot). I was able to flash stock-based ROMs, but not CM10, so I suspected it had something to do with the things that HTCDev won't allow the recovery access to, but the logs from TWRP didn't throw any errors, so while I suspected boot, I didn't know what to do about it. And everyone knows that it's easy to be caviler with everything is working, but as soon as you start having problems, you get gun shy about trying things.
Your post was the solution for me. Extract the boot.img file found inside the zip or your chosen ROM, and flash it using fastboot:
"fastboot flash boot boot.img"
heywetried said:
Thanks for this. I had the same problem, (S-ON, TWRP. black screen on boot). I was able to flash stock-based ROMs, but not CM10, so I suspected it had something to do with the things that HTCDev won't allow the recovery access to, but the logs from TWRP didn't throw any errors, so while I suspected boot, I didn't know what to do about it. And everyone knows that it's easy to be caviler with everything is working, but as soon as you start having problems, you get gun shy about trying things.
Your post was the solution for me. Extract the boot.img file found inside the zip or your chosen ROM, and flash it using fastboot:
"fastboot flash boot boot.img"
Click to expand...
Click to collapse
Hey out of curiosity did you like any of the stock based ROMs? If so which ones? I kinda wanna try one out but haven't settle on one
So my tablet won't get past the Asus start up screen, but I did manage to get CWM working, problem is that I have no roms on my internal SD, because I wiped everything trying to fix stuff with WSG Flasher (didn't work).
I've tried everything, but I'm at a total loss here. adb won't work, even after I installed that dreadful Asus PC Suite, WSG FLasher doesn't work because adb doesn't work and
Code:
fastboot -i 0x0b05 flash somerom.zip
doesn't work either.
I've tried installing dozens of roms and CWM versions through fastboot, but none worked. The only CWM image that did work was called "recover-jb.img" that I got from here, though it's kind of useless if I can't install any roms.
Any suggestions, or should I just throw my tablet out?
Pepe1Vo said:
So my tablet won't get past the Asus start up screen, but I did manage to get CWM working, problem is that I have no roms on my internal SD, because I wiped everything trying to fix stuff with WSG Flasher (didn't work).
I've tried everything, but I'm at a total loss here. adb won't work, even after I installed that dreadful Asus PC Suite, WSG FLasher doesn't work because adb doesn't work and
Code:
fastboot -i 0x0b05 flash somerom.zip
doesn't work either.
I've tried installing dozens of roms and CWM versions through fastboot, but none worked. The only CWM image that did work was called "recover-jb.img" that I got from here, though it's kind of useless if I can't install any roms.
Any suggestions, or should I just throw my tablet out?
Click to expand...
Click to collapse
what were you doing when you started having trouble? are you on jb or ics bootloader where is the nvida on your splash screen?
whycali said:
what were you doing when you started having trouble? are you on jb or ics bootloader where is the nvida on your splash screen?
Click to expand...
Click to collapse
I was trying to install CM10, initially installing any CM rom would fail because CWM would say "assert failed, model is not tf201" (It is most certainly a transformer prime, I checked double checked) I edited the updater-script file in the .zip to skip the model check, after that installing the rom went just fine, it would just hang indefinitely on the splash screen.
The tablet is on the jb bootloader, the nvidia logo is in the bottom right corner.
Pepe1Vo said:
I was trying to install CM10, initially installing any CM rom would fail because CWM would say "assert failed, model is not tf201" (It is most certainly a transformer prime, I checked double checked) I edited the updater-script file in the .zip to skip the model check, after that installing the rom went just fine, it would just hang indefinitely on the splash screen.
The tablet is on the jb bootloader, the nvidia logo is in the bottom right corner.
Click to expand...
Click to collapse
let me get this straight. you can figure out how to change the updater.script but you insist on using cwm? Fastboot twrp to your prime and install a rom zip from your microsd.
whycali said:
let me get this straight. you can figure out how to change the updater.script but you insist on using cwm? Fastboot twrp to your prime and install a rom zip from your microsd.
Click to expand...
Click to collapse
Err, I didn't even know there was an alternative to cwm... At any rate, will twrp allow me to transfer files? My microsd is empty due a hardwipe I did.
Yes. TWRP Allows you to also flash zips from micro sd . Altrough I'm not sure can you install it from the situation you're in.
Sent from my GT-I9100 using xda app-developers app
Pepe1Vo said:
Err, I didn't even know there was an alternative to cwm... At any rate, will twrp allow me to transfer files? My microsd is empty due a hardwipe I did.
Click to expand...
Click to collapse
first you need the drivers for fastboot installed to your pc. you can accomplish this by following the advice given here.
http://forum.xda-developers.com/showpost.php?p=34477256&postcount=5703
Next you need a working twrp which will help you install a rom from your external microsd card. get that here. and follow his install istructions.
http://forum.xda-developers.com/showpost.php?p=34359560&postcount=5497
then I recommend grabbing this rom to install from your microsd using twrp.
AndroWook Prime Hairy Bean v1.4
www.gamerzxtreme.com/AndroWook_Hairy_Bean_v1.4_FINAL_1.zip
you should only need to follow these instructions from there.
Download AndroWook Prime Hairy Bean v1.4 from one of the links above and copy to either root of internal SD or micro SD.
Boot into recovery (TWRP) and wipe cache, dalvik cache and factory reset. You can wipe system as well if you want a total deep clean but do so at your own risk.
Select to install ROM from SD and follow on screen prompts.
When install completed allow 30-60 mins for the system to cache itself upon which time you should now have a nice smooth TP.
Enjoy!
So i have a prime that had ANDROWOOK 2.2 on it with TWRP 2.5. Tablet has been good but was time for Androwook 2.4 so i went to TWRP and tried to do a factory reset and it couldnt mount the SD card or system, so i rebooted back to Androwook and tried doing a factory reset and it would just reboot never reset. So i went back to Androwook and tried format each item to no luck, just kept saying cant mount sd or cant mount cache, or system, etc. I tried to boot back into Androwook and now it just boots right into TWRP. Tried holding down vol and hitting power but still just right to TWRP. I can go to install and it sees the zip file for androwook but alwasy fails. saying
assert failed: write_raw_image("/tmp/blob". "staging")
E:Error executing updater binary in zip .........zip file
Error flashing zip ..... zip file
updating partition details...
E:Unable to mount '/cache
I can connect via ADB, I tried a ADB sideload but it failed too.
Any ideas, i would be happy just getting it to stock and starting over again, or whatever we can do
soloblazer said:
So i have a prime that had ANDROWOOK 2.2 on it with TWRP 2.5. Tablet has been good but was time for Androwook 2.4 so i went to TWRP and tried to do a factory reset and it couldnt mount the SD card or system, so i rebooted back to Androwook and tried doing a factory reset and it would just reboot never reset. So i went back to Androwook and tried format each item to no luck, just kept saying cant mount sd or cant mount cache, or system, etc. I tried to boot back into Androwook and now it just boots right into TWRP. Tried holding down vol and hitting power but still just right to TWRP. I can go to install and it sees the zip file for androwook but alwasy fails. saying
assert failed: write_raw_image("/tmp/blob". "staging")
E:Error executing updater binary in zip .........zip file
Error flashing zip ..... zip file
updating partition details...
E:Unable to mount '/cache
I can connect via ADB, I tried a ADB sideload but it failed too.
Any ideas, i would be happy just getting it to stock and starting over again, or whatever we can do
Click to expand...
Click to collapse
I have the same problem , i'm stuck in twrp !!!
I hope someone here can help us. i have already bricked one.
soloblazer said:
I hope someone here can help us. i have already bricked one.
Click to expand...
Click to collapse
Update, so i am able to talk via ADB, i can reboot the tablet from adb (reboots back to recovery). any ideas of what i need to flash? or push to it?
soloblazer said:
Update, so i am able to talk via ADB, i can reboot the tablet from adb (reboots back to recovery). any ideas of what i need to flash? or push to it?
Click to expand...
Click to collapse
So i am able to get it to mount the System, TWRP thinks the system is the ext SD card. so i can run the zip file for the rom and it says its successful and when i reboot the system right back to TWRP, and it has erased the sd card.
Ok, so i was able to ADB in TWRP and say "reboot bootloader" i did this and was able to get the 3 icons in boot and i could select android and it booted into android. When i restart it it goes back to TWRP and i can ADB again and get to android. So i need to know how to just flash everything back to stock or another rom from android or can I? it seems my problem i flashed TWRP and it was not the modded one from androwook. I tried a modded one i found on the forum that was suppose to be for it, i used terminal to do it, and it said it worked but when i restart the same thing happens.
soloblazer said:
Ok, so i was able to ADB in TWRP and say "reboot bootloader" i did this and was able to get the 3 icons in boot and i could select android and it booted into android. When i restart it it goes back to TWRP and i can ADB again and get to android. So i need to know how to just flash everything back to stock or another rom from android or can I? it seems my problem i flashed TWRP and it was not the modded one from androwook. I tried a modded one i found on the forum that was suppose to be for it, i used terminal to do it, and it said it worked but when i restart the same thing happens.
Click to expand...
Click to collapse
Bump this thread tomorrow mate as I am off out soon and I need you to try some things.
Do not go wiping anything as it looks like you can still get into android at the moment.
Ok Great, i did try terminal a blob file you had in one of your posts but didnt work.
So here is a recap of were i am at:
Tried to reflash the tablet because it was getting slow etc.
Got into a recovery bootloop. etc
So right now everytime i restart it goes to the asus logo and just will restart every 5 secs or so and come back with asus logo.
If i hold down vol down it will boot straight into recovery.
In recovery it will not mount ext drive. i was able to see it once and flashed the zip file i had and didnt work.
if i ADB and type adb restart bootloader, it will restart to the 3 icons of recovery, android, wipe data.
I can also do fastboot i believe.
I can then pick android and it boots up to my android will all my apps and data still there.
I tried to terminal the blob recovery you had posted an it said it worked, but when i restarted it went to the same asus logo over and over.
that is about where i am at now.
thanks
I know its early, but here is the Bump you requested.
THANKS AGAIN!
Bump
soloblazer said:
Bump
Click to expand...
Click to collapse
I haven't forgotten about you. I just had a new device and have been messing with it all day.
The problem with the mounting normally occurs when you flash an incompatible twrp onto the wrong bootloader.
Unfortunately your first post and some of your other info is all over the place.
Lets start by going into TWRP and typing adb reboot bootloader and tell me the version number up the top left of the screen.
It will start with a 10.
10.6.1.8-20130225. A03
Twrp. 2.5.0.0
Android build. Androwook prime hairy bean v2.2
soloblazer said:
10.6.1.8-20130225. A03
Twrp. 2.5.0.0
Android build. Androwook prime hairy bean v2.2
Click to expand...
Click to collapse
I don't think I ever supplied a Twrp 2.5 until hairybean 2.31 so it looks like you flashed that yourself and flashed the wrong version.
First this I would try is flashing the twrp from the following link in fastboot and see if you can get a working version of twrp back on there that can mount properly.
http://forum.xda-developers.com/showpost.php?p=40149294&postcount=8
flumpster said:
I don't think I ever supplied a Twrp 2.5 until hairybean 2.31 so it looks like you flashed that yourself and flashed the wrong version.
First this I would try is flashing the twrp from the following link in fastboot and see if you can get a working version of twrp back on there that can mount properly.
http://forum.xda-developers.com/showpost.php?p=40149294&postcount=8
Click to expand...
Click to collapse
I tried this yesterday. I never could get it to work in fastboot. I did it in android in terminal but it never seemed to take it said completed but when rebooted it was the same.
soloblazer said:
I tried this yesterday. I never could get it to work in fastboot. I did it in android in terminal but it never seemed to take it said completed but when rebooted it was the same.
Click to expand...
Click to collapse
You have to be more specific mate. What do you mean by not get it to work?
flumpster said:
You have to be more specific mate. What do you mean by not get it to work?
Click to expand...
Click to collapse
Sorry...
Says. Sending recovery 7966kb
Okay 2.927s
Writing recovery
Okay 2.003s
Finished total time 4.931s
The tablet does nothing but stays on the 3 icon screen. It does lfreeze it and I have to hold the power down to restart .
Goes back to same recovery.
When I do it in terminal it says about the same.
When I reboot same thing back to recivery.
soloblazer said:
Sorry...
Says. Sending recovery 7966kb
Okay 2.927s
Writing recovery
Okay 2.003s
Finished total time 4.931s
The tablet does nothing but stays on the 3 icon screen. It does lfreeze it and I have to hold the power down to restart .
Goes back to same recovery.
When I do it in terminal it says about the same.
When I reboot same thing back to recivery.
Click to expand...
Click to collapse
Try the fix for brick type 1a and see if you can get it to boot normally.
http://forum.xda-developers.com/showthread.php?t=1514088
flumpster said:
Try the fix for brick type 1a and see if you can get it to boot normally.
http://forum.xda-developers.com/showthread.php?t=1514088
Click to expand...
Click to collapse
Tried this too says completed in adb but when you reboot same thing.
soloblazer said:
Tried this too says completed in adb but when you reboot same thing.
Click to expand...
Click to collapse
Well if none of them methods are working for you the last resort is this.
http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
OK follow the steps but instead of flashing the stock firmware If lashed the recovery blob you had suggested early. And it worked. So now I can boot into the modified twrp. So now can I just flash your ROM?
Right guys I've got a nabi 2 which I was trying to update, I finally got onto jellybean but forgot to flash the bootloader, I have it in my sd card but the nabi won't boot normally or into recovery to flash the jellybean bootloader, I can navigate to fastboot etc... But it just hangs at the menu when I sselect recovery kernel. Any ideas at all are appriciated thanks
LifeOfALegend said:
Right guys I've got a nabi 2 which I was trying to update, I finally got onto jellybean but forgot to flash the bootloader, I have it in my sd card but the nabi won't boot normally or into recovery to flash the jellybean bootloader, I can navigate to fastboot etc... But it just hangs at the menu when I sselect recovery kernel. Any ideas at all are appriciated thanks
Click to expand...
Click to collapse
Look here http://forum.xda-developers.com/showpost.php?p=53557529&postcount=2302
Follow the first link and download NABI2RESIZE. Extract that.
Then in second link download hawkcore.zip and run that bat file.
You will need to setup APX driver.
aicjofs said:
Look here http://forum.xda-developers.com/showpost.php?p=53557529&postcount=2302
Follow the first link and download NABI2RESIZE. Extract that.
Then in second link download hawkcore.zip and run that bat file.
You will need to setup APX driver.
Click to expand...
Click to collapse
Right I have got it to boot onto recovery and installed the jellybean bootloader, but now it only boots when I go to recovery abd boot as normal, also when I try to charge it when on it freezes the whole tablet and charges very slowly. Also when I am in recovery and I went to wipe Calvin cache and data it comes up "are you sure, no OS installed" and then when I do wipe it it's says successful but also unable to mount e/ data, no file or folder found. I am also unable to mount the sd card? Sorry for the long post but I wanted to get all the problems in, thanks fir all your help
LifeOfALegend said:
Right I have got it to boot onto recovery and installed the jellybean bootloader, but now it only boots when I go to recovery abd boot as normal, also when I try to charge it when on it freezes the whole tablet and charges very slowly. Also when I am in recovery and I went to wipe Calvin cache and data it comes up "are you sure, no OS installed" and then when I do wipe it it's says successful but also unable to mount e/ data, no file or folder found. I am also unable to mount the sd card? Sorry for the long post but I wanted to get all the problems in, thanks fir all your help
Click to expand...
Click to collapse
So you have the ICS bootloader installed if you followed what I said above. You have to use the ICS TWRP. Use that version to do the procedure you first started with. Restore version 2.3 system, boot and addon, then before reboot the Jellybean bootloader.
Sorry for slow response out of town this weekend.
aicjofs said:
So you have the ICS bootloader installed if you followed what I said above. You have to use the ICS TWRP. Use that version to do the procedure you first started with. Restore version 2.3 system, boot and addon, then before reboot the Jellybean bootloader.
Sorry for slow response out of town this weekend.
Click to expand...
Click to collapse
Finally got sorted, just needed to flash twrp 2.3.6, and the issue with charging was just a charger that nabi sent out as a replacement. So all is good, thanks for all the help