:crying: please help me, I bricked my lww while installing unlimted ROM on it.
Now its stuck on the sony logo. Im not able to boot into recovery, but i can connect my phone in flashmode. HELP!
Ah u're here.
Are u sure ur bootloader unlocked?
Flash stock rom or custom kernel using flashtool. Ur phone not bricked yet.
Sent from my Nokia 3310 using Tapatalk 2
please help me sir
chepoz said:
Ah u're here.
Are u sure ur bootloader unlocked?
Flash stock rom or custom kernel using flashtool. Ur phone not bricked yet.
Sent from my Nokia 3310 using Tapatalk 2
Click to expand...
Click to collapse
Can you please send me the link for the stock rom, please
jiteshpabla97 said:
Can you please send me the link for the stock rom, please
Click to expand...
Click to collapse
Here http://forum.xda-developers.com/showthread.php?p=30322843
Sent from my Nokia 3310 using Tapatalk 2
thank you
chepoz said:
Here http://forum.xda-developers.com/showthread.php?p=30322843
Sent from my Nokia 3310 using Tapatalk 2
Click to expand...
Click to collapse
thankyou for the link, my phone is fine now, but can you tell me what i did wrong in installing the ROM? i cleared the dalvik cache etc. and it loaded 100% on my phone but it got stuck in the boot. can you guide me?
chepoz said:
Here http://forum.xda-developers.com/showthread.php?p=30322843
Sent from my Nokia 3310 using Tapatalk 2
Click to expand...
Click to collapse
chepoz, now my phone is unrooted, is my bootloader also locked, if not, how am i supposed to check it?
jiteshpabla97 said:
chepoz, now my phone is unrooted, is my bootloader also locked, if not, how am i supposed to check it?
Click to expand...
Click to collapse
Of course your phone is unrooted, these ftf files are unrooted
To check dial *#*#7378423#*#* -> Service Info -> Configuration -> Rooting Status. Please tell us what's there :good:
use custom kernel.
Sent from my Nokia 3310 using Tapatalk 2
Please help me
Please help me
I have brick my sony live with walkman, (Actually what happen)
i have a sony live with walkman, with rooted, Unclock bootloader (with test point method), and i install cm7.2 rom in that and the phone works fine, i want to try other roms for doing this i have wrongly deleted the system files using CMW.
After that my phone not start gives a bootloap on FXP logo, after that i flash stock (52) rom using flash tool. and all the things work fine my phone start normal. Then i rooted my live with walkman again and install cmw on that, after doing this i got a message to update stock rom to (62) latest sony software. i update over OTA and the update download sucessfully. then my phone switch off to install the updates. but when i switch on the phone then phone not starts, when i press power button then it show a green blinking lines, even charging is also not there, and when i connect my phone to usb then it shows phone connected in flashmode.
Please help me how i recover my WT19i
sorry for my bad english
Thanks in Advance
azim0106 said:
Please help me
I have brick my sony live with walkman, (Actually what happen)
i have a sony live with walkman, with rooted, Unclock bootloader (with test point method), and i install cm7.2 rom in that and the phone works fine, i want to try other roms for doing this i have wrongly deleted the system files using CMW.
After that my phone not start gives a bootloap on FXP logo, after that i flash stock (52) rom using flash tool. and all the things work fine my phone start normal. Then i rooted my live with walkman again and install cmw on that, after doing this i got a message to update stock rom to (62) latest sony software. i update over OTA and the update download sucessfully. then my phone switch off to install the updates. but when i switch on the phone then phone not starts, when i press power button then it show a green blinking lines, even charging is also not there, and when i connect my phone to usb then it shows phone connected in flashmode.
Please help me how i recover my WT19i
sorry for my bad english
Thanks in Advance
Click to expand...
Click to collapse
if the phone is connected in flashmode then y dont u try flashing the stock (52) again ??
MoonBlade said:
if the phone is connected in flashmode then y dont u try flashing the stock (52) again ??
Click to expand...
Click to collapse
i have flash stock (52) 2 or 3 times and it flash sucessfully but when i tried to on my phone by pressing power button, then green blinking shows and nothing happens, even when i tried to connect my charger to the phone, then also green led blinking again and again and nothing happen
what i do please help me
A FOTA brick maybe? Send it to service center dude
Sent from my Nokia 3310 using Tapatalk 2
azim0106 said:
Please help me
I have brick my sony live with walkman, (Actually what happen)
i have a sony live with walkman, with rooted, Unclock bootloader (with test point method), and i install cm7.2 rom in that and the phone works fine, i want to try other roms for doing this i have wrongly deleted the system files using CMW.
After that my phone not start gives a bootloap on FXP logo, after that i flash stock (52) rom using flash tool. and all the things work fine my phone start normal. Then i rooted my live with walkman again and install cmw on that, after doing this i got a message to update stock rom to (62) latest sony software. i update over OTA and the update download sucessfully. then my phone switch off to install the updates. but when i switch on the phone then phone not starts, when i press power button then it show a green blinking lines, even charging is also not there, and when i connect my phone to usb then it shows phone connected in flashmode.
Please help me how i recover my WT19i
sorry for my bad english
Thanks in Advance
Click to expand...
Click to collapse
Oh man, why did you do an OTA Update? Never ever do an OTA update with unlocked bootloader!
Look in the pinned thread by someguyfromhell, there's an unbricking guide
GokulStrikes said:
installed Serenity v3 Ultimate Edition., installed with 0 errors., now it got stuck with the sony logo., not even connecting with flashmode., don't know what to do., please help me out
Click to expand...
Click to collapse
Try reflashing ftf again. For that do the following steps:
1. Take battery off the phone
2. Wait 10 seconds
3. Open flashtool -> select the firmware -> click ok
4. When the window to put phone in flashmode appears, plug the battery in your phone again
5. Hold volume down and while holding connect phone to pc. Don't press anything else, just hold volume down
6. Wait until the flasing process has ended
And now you should be fine
Oh man each and every guide regarding unlocking bootloader advices u to Not to accept any OTA updates. Why did u do that?
please mark this thread with [SOLVED] tag if your ploblem is solved.
Related
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
did you try flashing any stock ftf rom file using flashtool?
or repair using PCC or SEUS.
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
Repair with Pc Companion or Update Service
Instructions:
Hold your back button (3button) , then connect with ur USB to x10 untill the LED light appear, after that wAAAit ur cpu install ur driver, then go pcc update ur phone, if it pop out that u have last software just continue it , AAAfter that all, ur bricked x10 hAAAve been repair
Hope helps
Superman™
It wont boot into flash mode or recovery , i know how to flash etc but i cant get it into flashmode (downloading mode) . Pc not picking it up either
Thanks anyways
Any other ideas
gordonx10i said:
It wont boot into flash mode or recovery , i know how to flash etc but i cant get it into flashmode (downloading mode) . Pc not picking it up either
Thanks anyways
Any other ideas
Click to expand...
Click to collapse
Then I guess you cant do anything about it
Also if if it wont boot in recovery or to the rom I dont think SE people can know that its running unofficial roms
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
Hey gordonx10i, did you try with "x10_2.3_aro"?
Try flash by this, then try to start xRecovery into SEXperia
Check the following XDA Post: http://forum.xda-developers.com/showthread.php?p=16118511
Directly link provided by efx_d3
http://mir.cr/0OIDEZNA
Problem is device not even seen by pc anymore it so dunno how to get it into flash mode is there perhaps not a script exploit that can be run from sd card ......
Sent from my GT-P7500 using xda app-developers app
How to get back to stock even with a broken USB
While I think this might help you :
http://forum.xda-developers.com/showthread.php?t=1054818
Take care mate !
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
gordonx10i said:
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
THeLogiC said:
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
Click to expand...
Click to collapse
+1 on that
Always works
If you had ferakernel, you don't even need to hold back lol
Sent from my Xperia X10 using xda premium
gordonx10i said:
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
ARO 2.3.3 kernal saved my life bro, i think you'll have the same luck too go ahead with that :good:
Unbricked from se logo screen
THeLogiC said:
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
Click to expand...
Click to collapse
thanx dude..
I have da same problem as gordonx10i
It worked for me from your firmware collection :good:
raghava_teja said:
thanx dude..
I have da same problem as gordonx10i
It worked for me from your firmware collection :good:
Click to expand...
Click to collapse
Glad it helped
Sent from my X10
does this method can fix my problem also?
also got stuck bootloader,
because of trying to unlock bootloader..
i guess its my fault, tryng to unlock while im in custom rom?
currently im downloading 2.3.3 stock rom,
and will try to flash it later..
ive tried already PCC and SEUS and still no luck.. (no available updates) =(
THeLogiC said:
Glad it helped
Sent from my X10
Click to expand...
Click to collapse
wow it works.. thnx! ive downloaded the rom in your link!! thnx a lot! ive managed to fix my fone.. =)
thanks!!
jrennald said:
wow it works.. thnx! ive downloaded the rom in your link!! thnx a lot! ive managed to fix my fone.. =)
thanks!!
Click to expand...
Click to collapse
No problem again
Sent from my X10
THeLogiC said:
No problem again
Sent from my X10
Click to expand...
Click to collapse
Remember guys X10 can't be bricked... it can always be unbricked and that too very easily all required is bit of patience to go through the forum
Sent from my Transformer TF101 using xda app-developers app
I was trying to root the phone before unlocking bootloader... yes i know bootloader should be unlocked first (Thats how i did my nexus s). So heres the problem, when i used flashtool (from this http://forum.xda-developers.com/showthread.php?t=1196808) to root the phone and i finished the kernel downgrade, and since it said to unplug the phone than, power on the device, and once you feel a vibration, immediately plug in the cable, i did and its just not doing anything now, the root button isnt popping up. Than i accidently closed flashtool and now the phone is stuck on the sony ericsson boot screen.
I was planning to do this: Unlock Bootloader -> Root Phone -> Flash desired rom/kernel
I dont need anything in my phone so i dont care if everything in there is lost. So if anyone knows what to do at this point please try and help me. Thanks in advance
Download sony pc companion and click repair option. And follow instructions it will reflash yo ur phone with stock android.
Sent from my MB526 using xda app-developers app
turffe said:
Download sony pc companion and click repair option. And follow instructions it will reflash yo ur phone with stock android.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Thanks though but i solved it, Just had to go back into flash mode and run flashtools again.
Hi, I have a orange network locked xperia ray st18i locked bootloader. I downloaded pc companion and did a software update and all went well. The phone booted up fine after the update until I shut it down and since then I have been unable to get passed the SE screen. It just hangs there. I am able to enter flash mode by pressing the down button and plugging the usb in. Tried phone repair option and still no jog.
Today I tried to unlock the bootloader using the pin touching menthod but that didnt work either. Said something like fatal error....
I need to unlock the bootloader to try a alternative rom to see if that works or revert back to the stock orange rom it came with but im cannot find this anywhere. I am a learner so any advice would be helpful. CAn anyone suggest a rom for the ray that can be installed using flash method WITHOUT unlocked bootloader? I am a **** for doing the uprgrade via sony website but I didnt think this would happen. should have left it as it was.
Thanks for reading.
Take your battery out and try reflashing again using SEUS.
Thread moved to Xperia Ray Q&A.
Yes I have tried that many times already and it finishes the update correctly but still hangs on the SE logo when turned on. I tried again just to see if anything has changed. When I connected the phone whilst pressing the down vol button it recognised it and said your phone already has the latest software but I re installed anyway. No change in result though.
Sony have asked to send the phone to repair and they will reply with a quote for fixing it. Has anyone used this service before and how much can i expect to pay for a software install? Repair office is in Ashford, kent.
thanks
Read my guide and try flashing a stock ftf file, if that fails theres a few other things you could try.
XperienceD said:
Read my guide and try flashing a stock ftf file, if that fails theres a few other things you could try.
Click to expand...
Click to collapse
Thanks for the reply. Do you know where I can download the stock orange tft file?
rollymac said:
Thanks for the reply. Do you know where I can download the stock orange tft file?
Click to expand...
Click to collapse
There is a method to build the stock ftf from the downloaded sony update service files, do this to build the ftf
Sent from my Nexus 7 running Android 4.2.1
mihahn said:
There is a method to build the stock ftf from the downloaded sony update service files, do this to build the ftf
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
All this techincal talk is affecting my sex life so Id rather stay a noob and focus on the boob!
SO CAN ANYONE TELL ME WHERE I CAN DOWNLOAD THE STOCK FTF FOR MY XPERIA RAY WHICH IS NETWORK LOCKED TO ORANGE AND HAS A LOCKED BOOTLOADER (CANNOT UNLOCK, TRIED TEST POINT METHOD).
I'll click the bloody thankyou button a million times if you can. thankyou!
rollymac said:
All this techincal talk is affecting my sex life so Id rather stay a noob and focus on the boob!
SO CAN ANYONE TELL ME WHERE I CAN DOWNLOAD THE STOCK FTF FOR MY XPERIA RAY WHICH IS NETWORK LOCKED TO ORANGE AND HAS A LOCKED BOOTLOADER (CANNOT UNLOCK, TRIED TEST POINT METHOD).
I'll click the bloody thankyou button a million times if you can. thankyou!
Click to expand...
Click to collapse
It's not as hard as you may think
Use this to create the ftf, it's step by step. If you can't/don't want to do it I can't help you because I have no orange firmware
Sent from my Nexus 7 running Android 4.2.1
mihahn said:
It's not as hard as you may think
Use this to create the ftf, it's step by step. If you can't/don't want to do it I can't help you because I have no orange firmware
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
thanks for the reply. When I did my upgrade it went through fine so I am assuming I alraedy have the new firmware on my phone. The problem is making it work. Why does my phone just stop and hang on the SE logo? are you telling me my original orange firmware is still in my mobile?
rollymac said:
so can anyone tell me where i can download the stock ftf for my xperia ray which is network locked to orange and has a locked bootloader (cannot unlock, tried test point method).
Click to expand...
Click to collapse
rollymac said:
Why does my phone just stop and hang on the SE logo?
Click to expand...
Click to collapse
HAD YOU READ THE FIRST PART OF MY GUIDE YOU WOULD ALREADY KNOW. Had you even read the stickys in the General section you would have found one.
Right so I created the .ftf file from the three update files. Ive downloaded x10 flash tool. I connect the phone and flashtools registers that a phone is connected then start the flash but soon after the phone just gets disconnected.
any idea's?
rollymac said:
Right so I created the .ftf file from the three update files. Ive downloaded x10 flash tool. I connect the phone and flashtools registers that a phone is connected then start the flash but soon after the phone just gets disconnected.
any idea's?
Click to expand...
Click to collapse
Download the latest flashtool (I guess it's 0.9.x) and install it. Go to the drivers folder and install all the drivers for all the phones and modes. Now you launch flashtool, but don't connect the phone! Click on the flash -> flashmode -> select the ftf and don't exclude anything (you have the ability on the right site).
Now click OK and the screen to connect the phone in flashmode appears. Shut down the phone, wait 20 seconds, hold volume down and while holding volume down connect the phone to PC.
Wait until the flashing process has finished and hope it'll start!
Sent from my Nexus 7 running Android 4.2.1
Thanks for guiding me and yes it finally flashed BUT the phone still hangs on the SE logo when booted up. I read somewhere on here another member had the same issue and it turned out to be the bandwidth???
What should I try now?
My mobile Sony Xperia Neo L is not getting switched on. It got turned off on its own. My mobile was under the below explained situation before it stopped working.
1. I was getting alerts saying - LOW PHONE MEMORY IS AVAILABLE delete some data. It had 43 MB left in phone memory.
2. Memory card was also full the day before.
3. I was not able to install any applications.
4. Since I have activated the auto update for few applications like Whatsapp, google maps etc. For them also i used to get alerts saying - INSUFFICIENT STORAGE IS AVAIALABLE TO UPDATE the software.
5. I always keep Wi-Fi on in my mobile. (If any open Wi-Fi is available mobile will get updates)
6. Battery was more than 30% charged.
All of the above may be the reasons for software problem.
No time in the past phusical harm happened to the phone, Since i bought in 2012 August.
I had gone through Sony Support Center to repair, but still it didnt worked.
Could any one help me to solve the problem ?
NSatya said:
I had gone through Sony Support Center to repair, but still it didnt worked.
Could any one help me to solve the problem ?
Click to expand...
Click to collapse
Even sony can't help you how can we help you ?
Through sony support center i had upated the OS. In fact my phone was having latest version of OS than what I had installed through Sony.
NSatya said:
My mobile Sony Xperia Neo L is not getting switched on. It got turned off on its own. My mobile was under the below explained situation before it stopped working.
1. I was getting alerts saying - LOW PHONE MEMORY IS AVAILABLE delete some data. It had 43 MB left in phone memory.
2. Memory card was also full the day before.
3. I was not able to install any applications.
4. Since I have activated the auto update for few applications like Whatsapp, google maps etc. For them also i used to get alerts saying - INSUFFICIENT STORAGE IS AVAIALABLE TO UPDATE the software.
5. I always keep Wi-Fi on in my mobile. (If any open Wi-Fi is available mobile will get updates)
6. Battery was more than 30% charged.
All of the above may be the reasons for software problem.
No time in the past phusical harm happened to the phone, Since i bought in 2012 August.
I had gone through Sony Support Center to repair, but still it didnt worked.
Could any one help me to solve the problem ?
Click to expand...
Click to collapse
One last try you can give... Connect your phone to the charger and check if the led turns on.. Or else connect USB to the phone... While plugging it to the computer, hold the back button.... Check for the led light to turn GREEN... If this happens, then nothing wrong has happened to your phone.. Else no one can help you... PM me for further help..
cherry676 said:
One last try you can give... Connect your phone to the charger and check if the led turns on.. Or else connect USB to the phone... While plugging it to the computer, hold the back button.... Check for the led light to turn GREEN... If this happens, then nothing wrong has happened to your phone.. Else no one can help you... PM me for further help..
Click to expand...
Click to collapse
I have done as you said, LED light turned green... If there is no problem, y it is not getting switch on ?
I really appreciate your response.
AW: [Q] Sony Xperia Neo L not getting switched on
NSatya said:
I have done as you said, LED light turned green... If there is no problem, y it is not getting switch on ?
I really appreciate your response.
Click to expand...
Click to collapse
If led turns green than install flash tool to your PC, download latest ftf file for your phone and flash the ftf to your phone. But flash not whole rom parts, only flash kernel within that ftf.
Gesendet von meinem Galaxy Nexus mit Tapatalk 2
motorazrv3 said:
If led turns green than install flash tool to your PC, download latest ftf file for your phone and flash the ftf to your phone. But flash not whole rom parts, only flash kernel within that ftf.
Gesendet von meinem Galaxy Nexus mit Tapatalk 2
Click to expand...
Click to collapse
Thanks for your reply, could you please provide the steps to do what you said..
If u from india then u can call me I can fix ur problem. Just dwnld flashtool and firmware of neo l then flash it
Sent from my MT25i using xda premium
motorazrv3 said:
If led turns green than install flash tool to your PC, download latest ftf file for your phone and flash the ftf to your phone. But flash not whole rom parts, only flash kernel within that ftf.
Gesendet von meinem Galaxy Nexus mit Tapatalk 2
Click to expand...
Click to collapse
and why should he flash only kernel??
sumitverma1 said:
If u from india then u can call me I can fix ur problem 9437256037. Just dwnld flashtool and firmware of neo l then flash it
Sent from my MT25i using xda premium
Click to expand...
Click to collapse
Kindly provide the giudance, I am not in India now.. Explain the steps how to do..
NSatya said:
Kindly provide the giudance, I am not in India now.. Explain the steps how to do..
Click to expand...
Click to collapse
it doesn't matters where you are... Download flashtool... Install it... Then you need a firmware file for your phone... Go to http://forum.xda-developers.com/showthread.php?t=2047914.. Download whichever firmware file you want... .587 is recommended... If you want you can have .631 also... after downloading the .ftf file, place it in firmwares folder of the flashtool installed folder... open flashtool.. Click on lightning icon.. It will ask 'flashmode' or 'fastboot'.. select flashmode... Then select the .ftf which you placed now.. Uncheck 'no final verification' option... Then connect your phone to the PC by holding the back button on ur phone... After the flashing is finished, switch on your phone... its done..
cherry676 said:
One last try you can give... Connect your phone to the charger and check if the led turns on.. Or else connect USB to the phone... While plugging it to the computer, hold the back button.... Check for the led light to turn GREEN... If this happens, then nothing wrong has happened to your phone.. Else no one can help you... PM me for further help..
Click to expand...
Click to collapse
I have the same situation here and i tried the above but the green led light is not turning on. Does it mean there is something wrong with my phone? I do need help with this asap. Thank you in advance!
ghennn said:
I have the same situation here and i tried the above but the green led light is not turning on. Does it mean there is something wrong with my phone? I do need help with this asap. Thank you in advance!
Click to expand...
Click to collapse
Switch off the phone.. Hold the "back" button and connect your phone to computer.. The LED should turn GREEN... It means that computer is recognising your phone.. Otherwise there might b some problem in the drivers or in the phone.. I cannot help you unless you can explain what you did before your phone entered into such state...
sony Xeperia neo L Mt 251 not turning on
sumitverma1 said:
If u from india then u can call me I can fix ur problem 9437256037. Just dwnld flashtool and firmware of neo l then flash it
Sent from my MT25i using xda premium
Click to expand...
Click to collapse
I have done as you said, LED light turned green... If there is no problem, y it is not getting switch on ?
I really appreciate your response.
svahmeds said:
I have done as you said, LED light turned green... If there is no problem, y it is not getting switch on ?
I really appreciate your response.
Click to expand...
Click to collapse
If LED is turning on, then its a good news that your phone is not dead. If nothing is getting displayed on the screen, then you might have fried up the internal circuitry. I have ended up with it. It cost me 25% of mobile's cost to get it repaired again.
i can't turn on my cell sony xeperia neo L mt251
cherry676 said:
If LED is turning on, then its a good news that your phone is not dead. If nothing is getting displayed on the screen, then you might have fried up the internal circuitry. I have ended up with it. It cost me 25% of mobile's cost to get it repaired again.
Click to expand...
Click to collapse
Hello
I can't turn my cell phone Sony Xeperia neo L MT251 please some on can help me
svahmeds said:
Hello
I can't turn my cell phone Sony Xeperia neo L MT251 please some on can help me
Click to expand...
Click to collapse
Flash a new ftf file. There is a guide for it. Phillip Wu's thread has all the steps. Go through the steps about flashing new stock firmware.
Xperia Neo L bricked ....
Hi All,
I think i have bricked my xperia neo l to a pretty bad shape.....Please help me ...
1)I rooted the phone sucessfully with the kit developed by DoomsLord
2)I installed the cwm recovery, took backup.
3)I did not flash the kernel but went ahead with the ICS revolution ROM Xperia NEO L:crying:
4)Installation of ICS went fine but the phone was stuck in the boot mode. Sony screen used to come and device used to boot......
Here is the stupid part..
5) I tried to go to recovery it didn`t work.. I thought maybe the kernel is a problem..I used the ICS kernel and flashed it.
Nothing works now...When i connect my cell to the laptop windows says device not recognized..I am trying to go to flashboot mode not working...Is there a way to fix it ? If yes please provide me any pointers...
mohans26 said:
Hi All,
I think i have bricked my xperia neo l to a pretty bad shape.....Please help me ...
1)I rooted the phone sucessfully with the kit developed by DoomsLord
2)I installed the cwm recovery, took backup.
3)I did not flash the kernel but went ahead with the ICS revolution ROM Xperia NEO L:crying:
4)Installation of ICS went fine but the phone was stuck in the boot mode. Sony screen used to come and device used to boot......
Here is the stupid part..
5) I tried to go to recovery it didn`t work.. I thought maybe the kernel is a problem..I used the ICS kernel and flashed it.
Nothing works now...When i connect my cell to the laptop windows says device not recognized..I am trying to go to flashboot mode not working...Is there a way to fix it ? If yes please provide me any pointers...
Click to expand...
Click to collapse
Dear friend.....
First,charge ur device at least 2hours....
When u charge ur phone,try to read carefully every step how install the custom rom u want....
After that...
-Flash full firmware via flashtool (flashmode)
Let ur phone on first...
And after ur phone works,its up to u maybe u want to continue another step to install custom rom u want....
But dont forget to flash the custom kernel recommended by the dev first before u do another step....
(flash custom kernel via fastboot)...
Hope it help and good luck.....
Sent from my MT25i using xda app-developers app
well..
Thanks for the advice ..But Windows is not recognizing the phone..When i try to flash and go into flash mode ..Pressing the back button and connecting..The flash tool says device not connected
Hi guys, i don't know how to solve a problem with my Sola. I read the recover soft-brick guide for xperia models but i can't solve it. I think i bricked.
When i try to turn on it's on Sony screen and there's nothing to do. I can use on flash mode and flash the kernel but the result is the same when i turn on. The led works like green in flash mode, or red when i finish the flash and the device is still connected. I have a locked bootloader, and all this happened when i wanted to restore a backup, i probably made a mistake: do a full wipe after that. I think that's is still in warranty, isnt' it? What can i do? There are some tips on the tutorial but i'm afraid to kill the battery or make other mistakes. Please help me guys.
And sorry for my bad english =(
brimbi said:
Hi guys, i don't know how to solve a problem with my Sola. I read the recover soft-brick guide for xperia models but i can't solve it. I think i bricked.
When i try to turn on it's on Sony screen and there's nothing to do. I can use on flash mode and flash the kernel but the result is the same when i turn on. The led works like green in flash mode, or red when i finish the flash and the device is still connected. I have a locked bootloader, and all this happened when i wanted to restore a backup, i probably made a mistake: do a full wipe after that. I think that's is still in warranty, isnt' it? What can i do? There are some tips on the tutorial but i'm afraid to kill the battery or make other mistakes. Please help me guys.
And sorry for my bad english =(
Click to expand...
Click to collapse
Have you tried to flash a stock firmware with flashtool?
elia222 said:
Have you tried to flash a stock firmware with flashtool?
Click to expand...
Click to collapse
Yes and flash is ok but when i turn on it's still on sony screen...i waited about 5 minutes. I tried with 6.1.1.B.1.54 and with 6.1.1.B.1.1.0 with same result. I know i have to wait after flash a stock firmware but i see it's too much time. Maybe because when i want to switch off i have to use hard reset (i mean with all 3 button). I don't know..thanks to reply in any case
brimbi said:
Yes and flash is ok but when i turn on it's still on sony screen...i waited about 5 minutes. I tried with 6.1.1.B.1.54 and with 6.1.1.B.1.1.0 with same result. I know i have to wait after flash a stock firmware but i see it's too much time. Maybe because when i want to switch off i have to use hard reset (i mean with all 3 button). I don't know..thanks to reply in any case
Click to expand...
Click to collapse
In any case, if you don't solve the issue by yourself, your phone is still in warranty (just don't say to the reparation service that you played with flashtool )
elia222 said:
In any case, if you don't solve the issue by yourself, your phone is still in warranty (just don't say to the reparation service that you played with flashtool )
Click to expand...
Click to collapse
Yep i hope. What can i do now? When i charge it turn on by itself and always on sony logo (but led is off)
Also when i flash and it's still on usb port the led is red but the device is off, i'm looking for a solution on RECOVER SOFT-brick thread but i don't know in which part am i.
brimbi said:
Yep i hope. What can i do now? When i charge it turn on by itself and always on sony logo (but led is off)
Also when i flash and it's still on usb port the led is red but the device is off, i'm looking for a solution on RECOVER SOFT-brick thread but i don't know in which part am i.
Click to expand...
Click to collapse
You tried with the Sony PC Companion/Update Service? It uses flashmode.. When I bricked my U i had relocked my bootloader and flashed via PC Companion... Worked for me :fingers-crossed:
Press thanks if I helped:good:
Try to start from the beginning, and follow the instructions carefully.
dotafan said:
You tried with the Sony PC Companion/Update Service? It uses flashmode.. When I bricked my U i had relocked my bootloader and flashed via PC Companion... Worked for me :fingers-crossed:
Press thanks if I helped:good:
Click to expand...
Click to collapse
But i have a locked bootloader, will i invalidate warranty? i'm going to try with pc companion =)
No it won't!!
If you were on a custom rom flash kernel/ftf via flashtool nd then use PC Companion:thumbup:
Sent from my ST25i using xda app-developers app
It works!!!!!!!!
dotafan said:
No it won't!!
If you were on a custom rom flash kernel/ftf via flashtool nd then use PC Companion:thumbup:
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
It works! My sola works now! Thank you guys! Thank you very much!
brimbi said:
It works! My sola works now! Thank you guys! Thank you very much!
Click to expand...
Click to collapse
Glad I could help :good: