After 20 falls , uncountable number of bumps... , keys and phone together ...
And finally today!!! My screen got scratched but just a teeny bit!
And its on the screen protector!!
All i can say is this phone is tooo durable...
Tell me your experiences with screen getting scratched
My back cover got a (very) little clicky after some drop from table to hard floor, just bend it hard with hand and no clicky now, lolz. The screen protector is covered with scratch now, not a problem.
But the soft touch started to peeled off on the corner now. I have another white back cover but it's not look as good as the black one (really wish for a glossy black one) anyone know how to convert the soft touch one to glossy?
The soft touch on my black jack (i607) in old days: bruised as hell but never peel off.
Me too facing the peeling of the back cover at the corners. Can anyone suggest from where i can buy another back cover ?
me too. im looking for someone who sells a back cover for my xperia ray
I got my camera sensor scratched (sort of, it looks like it lost a layer of plastic in a few spots), the back cover losing it's matte surface in the corners, and some of the paint in one of the metallic corners and I take maniacal care of it and never dropped it once.
I also had 2 white pixels and could not get it replaced because unless the screen has FOUR bad pixels on the same line they are not supposed to replace it as it's not defective.
That being said, do you think it's more likely to win at the national lottery or to have 4 dead pixels on the same line out of 409.920 pixels?
spypsy said:
Me too facing the peeling of the back cover at the corners. Can anyone suggest from where i can buy another back cover ?
Click to expand...
Click to collapse
Back cover no, sorry; but after you get one, a gel cover like this one is handy. I'm very satisfied with it.
But i will become yellow after a time .
I have the same just buy one made in leather it cost 3 dollars with free shipping on ebay
I have buy back cover on ebay,.. original.
yeah I have a scratch on the screen, even is have a screen protector
(in whisper) isn't this the development forum?:silly:
WELL theres no General Forum for The Ray ...
Just two little visible scratches in the protector screen, and some more "invisible" (they're only visible at the sun).
Yes, very durable phone. I love it.
I have a little crack on my screen, don't even know what it's from..
actually i'm an ROTC Cadet which means all the things in your pocket usually bumps to stone whenever senior officers give you exercise. my ray never had scratches on the screen, but a lot of scratches at the back cover, i must say that this beautiful monster is really durable.
if you wear it inside a case there should be no need for other protections
:cyclops:
I had a few drops but was smart enough to have a rubber-plastic mixed cover for it. It has saved me from quite a few heart attacks.
I have dropped it a couple of times but the phone has not received any damage... but some days ago I noticed that the crystal of the camera sensor has some blur on it because of alcohol splatter (I don't think these marks could be removed ) and also two red pixels on the center of the screen that are only noticeable when I set a black background... other than those the phone is perfect
WELL theres no General Forum for The Ray ...
Click to expand...
Click to collapse
Exactly, I can't see our phone in the general forum for mini/pro/active so...
OnT: Mine have managed too stay pretty shiny but I almost missed the bus going to work one day so I had to run my a%# off and suddenly I feel a jerky motion from my headphones and the music stops. Man did that phone fly or what, I think it was 10 feet between the phone, battery and backpiece :/
Just put everything together and it was like new besides a scratch on the screen (and I don't even use screenprotection )
Still, looks pretty good though.
Sent from my Paranoid SGS2
That looks like a screen protector to me on the second picture.
yeh looks like screen protectors
Lot's of scratches... I think the screen isn't so good what iphone 4 had but still better phone than any apple/samsung
Hello, I have galaxy s3 with cracked front screen (amoled screen is not cracked) and I want to change it. I have viewed some videos about changing it and have a question about a digitizer and front glass. Example in this video http://youtu.be/6gLzEbAIGos?t=3m32s a man removes front screen (i dont know how to call it, digitizer or front glass) at 3:30 and then at 4:30 he puts a new front screen but there are no connectors on it, so how does the touch screen even works without any connectors? This man said that he bought this screen http://www.amazon.com/gp/product/B00932V17C/ref=oh_details_o06_s00_i00?ie=UTF8&psc=1 and there's written that it is a front glass and "The LCD display and touch screen are not included". So where is the digitizer (touch screen) ??? At that video when he removed front screen there was only amoled screen left, then he put on that front screen without digitizer and touch screen worked. I am soo confused. Please explain it to me.
As I understand it the front part is simply a glass screen over the digitiser/touchscreen hence the lack of connectors, the tricky part is removing the glass from the touchscreen without damaging it, then rebonding the new glass.
Sent from my GT-I9300
ghostofcain said:
As I understand it the front part is simply a glass screen over the digitiser/touchscreen hence the lack of connectors, the tricky part is removing the glass from the touchscreen without damaging it, then rebonding the new glass.
Sent from my GT-I9300
Click to expand...
Click to collapse
But in the video when he removed that front glass without connectors there seems no digitizer left over the lcd.
The digitiser and oled screen are bonded together, the front glass is just a cover.
Don't bother with the cheap 'glass', it's usually soft plastic and useless. If you read the reviews it's clear you are buying a con.
Sent from my GT-I9300 using Tapatalk
Hello. I have had a galaxy s3 with cracked glass and tried to replace it. I have seen many videos on youtube how to replace it. Basically people on these videos heat the screen and then remove the front glass easily, because the digitizer is glued to the lcd. But when I tried to remove it it came off quite easily, but only then I noticed that the digitizer was glued not to the lcd but to the front glass, so when i tried to remove front glass I accidentally broke the digitiser connector and somehow damaged the lcd. You can see photos here:
http://i.ebayimg.com/t/Samsung-galaxy-S-III-/00/s/MTYwMFg5MDE=/z/N0AAAOxylpNTUq5H/$_58.JPG
http://i.ebayimg.com/t/Samsung-galaxy-S-III-/00/s/MTYwMFg5MDE=/z/QREAAMXQ74JTUq67/$_58.JPG (in this photo you can see that the digitizer was glued to the front glass very strongly)
I would like to ask, do you know why the digitizer could have been glued to the front glass but not to the lcd? And why the lcd could have been damaged while removing front glass??
I would really wanna know the answer myself, as I ordered one that should have reached yesterday, but as they do not work on weekends, it will be here tommorow, and I don't wanna brake my display forever, especially because mine is not that damaged.
Any ideas?
my advice don't bother with a glass replacement. I HAVE TRIED TWICE and as the op said the digitizer is glued to the front glass. this has been the case with both the original screen and two replacement lcd/digitizer/glass assemblies that i personally took apart. each time the glass was fused to the digitizer . i used a heat gun and a laser thermometer and still i failed. I was successful replacing the whole screen assembly twice . but those cost about $130 from amazon,com. These replacements may seem at first like oem but the ones i got cracked very easily. they dont use the gorilla glass and the quality is not as good. one replacement was really bad in sunlight. could not see anything. after my screen cracked a third time i got a galaxy s 5 . and started using a case and screen protector.
I've got a Galaxy S III (i9300) with a very shattered front glass. The display and digitizer works just fine though. Menu, back and home buttons too. Everything is working, i just need to replace the front glass. I've once replaced the whole front package (LCD, Glass, Digitizer) on a Galaxy S2 very successfully so i have some form of experience.
Will be my first time replacing only the front glass. Unfortunately i wont be able to put any LOCA there as i dont have any UV light. I do however some regular adhesive 2mm tape that i will put around the screen to prevent dust and stuff from coming in. Also i dont have a IR thermometer and i will be using a hair dryer. I know how hot it has to be by feeling it. I should almost not be able to hold my hands on the glass. It might take a very long time but if its possible to do it, im willing to try.
What i'm worried about is the glass shards that are in the middle of the screen. Most shards end at the edge of the screen so i can apply pressure there when im removing the shards. But the shards in the middle have all edges on the digitizer. I cannot apply any form of pressure towards the digitizer so im worried of how ill remove them. Also the left lower corner around the menu button is full with tiny shards. like 0.5mm-3mm shards. Im wondering what is the best way of removing them? BTW i still got the touch screen protection plastic on. It got bubbles now cuz of the cracks.
Here is a picture of how cracked it is. Its not exact but close enough. Paint is OP.
The black spot in bottom is where the glass is simply gone. It fell of after time. I put some tape over it to cover it up so nothing can fall in.
Any advice on how to remove these shards?
Very appreciated
Hi guys,
so my tablet fell on the floor and the glass covering the display cracked in several places. Is there any possibility to order this glass from ebay or whatever and replace it myslef?
Thank
giosal said:
Hi guys,
so my tablet fell on the floor and the glass covering the display cracked in several places. Is there any possibility to order this glass from ebay or whatever and replace it myslef?
Thank
Click to expand...
Click to collapse
Well... as far as i read replacing just the glass is a bit of a hit or miss with the chance that you have to just take the glass off without killing the panel. On my smashed N7 i just replaced the screen panel and glass as one piece but i dont know how it would work with the z4 and its waterproofness.