I hope I am in the right forum for this thread. I have plenty of questions and hope to get answers to a few..... Here goes -
A few weeks ago I bought a nook 16Gb Tablet essentially for my wife and created a CM7 SD card to allow using it in stock BN system as well as experiment with Android use from that card. The end result is I decided I needed one for myself so I wouldn't conflict with her use. I had months ago rooted my nook eink but regardless of its expanded capability it was still only a great ebook reader and hopeless as a web browser, etc. So bought a Certified Preowned 16Gb nook Tablet for myself and duplicated the CM7 SD card process and was able to switch between stock nook use and Andorid use from the SD card using the dual boot process. I found myself mostly in the Andorid side and began to wonder why I was keeping the unused nook side around. After a ton of forum reading I decided to root my tablet and leave my wife's in its dual boot format - undoubtedly a safe move....
I used this process:
http://forum.xda-developers.com/showthread.php?t=1466583&page=24
it is titled:
How to root 1.4.1 (or any other version) using just an sdcard {easy}
and I followed the detailed steps and links from "liquidzoo" post #240. Creating the SD card for the rooting process was easy. It went well up to the point of the step of powering up after inserting the SD card in the powered down nook. It kept booting into the stock BN nook side by use of the power on button. It began booting to the SD card only after I allowed it to power up by plugging it into my pc with the usb cord. Then the following steps went fine after I discoverd I had to use the volume controls to step through the menu selections. Thereafter it did go smoothly through the process. When the process indicated it had completed powered off, removed the SD card, and powered up into Android.
It seems to be somewhat faster than using Android from a dual boot (CM7 on SD card). I guess I missed somewhere that it would have dual a home selection menu allowing the stock nook home menu choice along with Android - so the best of both worlds. I am still familiarizing my self with the new configuration but so the fiirst of a few questions are:
Aside from experimentation, is there any way of finding out what all the icons in the status bar are for on the vbarious screens? Some are obvious but at one point I had a flashing-inverted-chevron icon that seemed to be maybe a downloading indicator but I couldn't find what.
Is there a simple toggle to switch from nook to android screens? Seems to be several taps to achieve that.
How do I install the Amazon Android App? I can' seem to find it.
I'll probably reply to this with other questions after I do more experimenting but answers to these woiuld be helpful.
Thanks in advance. I'm still a noob so I can't post to the link above but I think somewhere I saw the ability to 'Thank' as well as 'Donate' - both of which I need to do now. I think I'm really going to like the newly configured nook Tablet.
sawbuck00 said:
I hope I am in the right forum for this thread. I have plenty of questions and hope to get answers to a few..... Here goes -
A few weeks ago I bought a nook 16Gb Tablet essentially for my wife and created a CM7 SD card to allow using it in stock BN system as well as experiment with Android use from that card. The end result is I decided I needed one for myself so I wouldn't conflict with her use. I had months ago rooted my nook eink but regardless of its expanded capability it was still only a great ebook reader and hopeless as a web browser, etc. So bought a Certified Preowned 16Gb nook Tablet for myself and duplicated the CM7 SD card process and was able to switch between stock nook use and Andorid use from the SD card using the dual boot process. I found myself mostly in the Andorid side and began to wonder why I was keeping the unused nook side around. After a ton of forum reading I decided to root my tablet and leave my wife's in its dual boot format - undoubtedly a safe move....
I used this process:
http://forum.xda-developers.com/showthread.php?t=1466583&page=24
it is titled:
How to root 1.4.1 (or any other version) using just an sdcard {easy}
and I followed the detailed steps and links from "liquidzoo" post #240. Creating the SD card for the rooting process was easy. It went well up to the point of the step of powering up after inserting the SD card in the powered down nook. It kept booting into the stock BN nook side by use of the power on button. It began booting to the SD card only after I allowed it to power up by plugging it into my pc with the usb cord. Then the following steps went fine after I discoverd I had to use the volume controls to step through the menu selections. Thereafter it did go smoothly through the process. When the process indicated it had completed powered off, removed the SD card, and powered up into Android.
It seems to be somewhat faster than using Android from a dual boot (CM7 on SD card). I guess I missed somewhere that it would have dual a home selection menu allowing the stock nook home menu choice along with Android - so the best of both worlds. I am still familiarizing my self with the new configuration but so the fiirst of a few questions are:
Aside from experimentation, is there any way of finding out what all the icons in the status bar are for on the vbarious screens? Some are obvious but at one point I had a flashing-inverted-chevron icon that seemed to be maybe a downloading indicator but I couldn't find what.
Is there a simple toggle to switch from nook to android screens? Seems to be several taps to achieve that.
How do I install the Amazon Android App? I can' seem to find it.
I'll probably reply to this with other questions after I do more experimenting but answers to these woiuld be helpful.
Thanks in advance. I'm still a noob so I can't post to the link above but I think somewhere I saw the ability to 'Thank' as well as 'Donate' - both of which I need to do now. I think I'm really going to like the newly configured nook Tablet.
Click to expand...
Click to collapse
First, read this.
Now, just so we're on the same page.
You created an sd card that allowed you to boot into a custom recovery and then using the volume up/down buttons, navigated to install and installed a zip file that allowed you to root the device correct?
If that is the case, you are still on the stock OS (as it sounds from your description). This is why you have both the stock B&N user interface (launcher) and a custom one (the one that looks more like cm7 did when booting from an sdcard).
Still have that custom recovery card? Here's my suggestion. Download a custom rom like cm7 and the appropriate gapps file (google apps, including the play store). Store these files on your internal storage. Next, boot back into the custom recovery and create a backup. Then, just as you did before, navigate to installing a zip and find the cm7 zip file you found before. Install the gapps zip file as well. When you're done, wipe data/factory reset and wipe cache. DO NOT FORMAT SYSTEM OR ANYTHING LIKE THAT (people do this for some reason, I don't understand why and it breaks things - don't do it.) Upon rebooting, you will no longer have the stock OS installed You will have a custom rom, cm7 installed.
The difference from your current setup is that right now, the core of the device is still based on B&N version of Android. The alternate user interface is nothing more than a tease of what Android is truly capable of. A custom rom opens up many more doors and should be a much smoother experience.
Any questions post them. And please read the first post of the thread I linked.
---------- Post added at 12:20 PM ---------- Previous post was at 12:18 PM ----------
Also, I'm morally obligated to advise you to return the Nook and buy a Nexus 7, if you truly prefer the Google experience.
A bit to more to chew on....
Cubanluke88 said:
First, read this.
Now, just so we're on the same page.
You created an sd card that allowed you to boot into a custom recovery and then using the volume up/down buttons, navigated to install and installed a zip file that allowed you to root the device correct?
If that is the case, you are still on the stock OS (as it sounds from your description). This is why you have both the stock B&N user interface (launcher) and a custom one (the one that looks more like cm7 did when booting from an sdcard).
********
part of post edited out for future coment
********
Any questions post them. And please read the first post of the thread I linked.
---------- Post added at 12:20 PM ---------- Previous post was at 12:18 PM ----------
Also, I'm morally obligated to advise you to return the Nook and buy a Nexus 7, if you truly prefer the Google experience.
Click to expand...
Click to collapse
Thank you, Cubanluke88, for you thoughts and suggestions.
First, I did grab your first linked post and realized some misconceptions. I still need to digest it more thoroughly, though.
On the part of your response that I have edited out in the qoute, I also want to read more troroughly and pose some questions in a later response.
As for the final suggestion, I have been eyeing the Nexus 7 for some time ane even though it is a bit more expensive than the nook Tablet I currently own I think I might get it (or a similar device) when fortune and convenience presents itself. For now, I am still in a learning mode with the Android-like device I currentlhy have and need to read and educate myself further. As stated in my opening post - I am a noob - there is a lot of experimenting I need to do.
I will be replying with some questions after more reading and thought on your offered suggestions in the section I edited out for the time being.....
questions....again
Cubanluke88 said:
First, read this.
Still have that custom recovery card? Here's my suggestion. Download a custom rom like cm7 and the appropriate gapps file (google apps, including the play store). Store these files on your internal storage. Next, boot back into the custom recovery and create a backup. Then, just as you did before, navigate to installing a zip and find the cm7 zip file you found before. Install the gapps zip file as well. When you're done, wipe data/factory reset and wipe cache. DO NOT FORMAT SYSTEM OR ANYTHING LIKE THAT (people do this for some reason, I don't understand why and it breaks things - don't do it.) Upon rebooting, you will no longer have the stock OS installed You will have a custom rom, cm7 installed.
.
Click to expand...
Click to collapse
Cubanluke88,
Thanks again for giving me something to think about.
I have read/reread both of your linked posts and your complete response to my post. Further, it is useful to comment that with my nook Tablet hardware it is not at all important for me to have the BN OS. I have a classic nook eink that is totally satisfactory for anything I may need for BN usage alone - mostly, ebook purchase and reading. I purchased the tablet as a means to get access to Android applications not possible from the nook classic which was also hopeless as a general web access device. As a rooted Android device, I anticipate it's nook app to be satisfactory as an ebook reader as well.
Referring to the quoted segment of you initial response:
Still have that custom recovery card?
Yes.
Download a custom rom like cm7 and the appropriate gapps file (google apps, including the play store) Store these files on your internal storage..
Can you suggest a pointer? I get swamped and cofused on what to choose when I google. The verison I have filed on my PC is embedded in an SD image file and I suspect that is not what you were referring to ( I have: -->> "Team-B-CM7SD-Alpha_final.img".
By "internal storage" do you mean in the recovery card or within the Tablet through USB connection?
Next, boot back into the custom recovery and create a backup. Then, just as you did before, navigate to installing a zip and find the cm7 zip file you found before. Install the gapps zip file as well. When you're done, wipe data/factory reset and wipe cache.
The backup would be my current loaded system - in case I need to get back?
.
When you're done, wipe data/factory reset and wipe cache.
Is this a single menu item on the recovery card or separate commands?
I appreciate the help and apologise for the need for spoon feeeding but I hope it helps avoid making further mistakes......
One last thought, on the recovery card I downloaded and included "flash_B&N_Stock_v1.4.3_8-16gb_emmc" which I assume would restore to stock 1.4.3 BN version. Is that prossible? and would that be easier to do and start fresh?
Thanks in advance....
sawbuck00 said:
Can you suggest a pointer? I get swamped and cofused on what to choose when I google. The verison I have filed on my PC is embedded in an SD image file and I suspect that is not what you were referring to ( I have: -->> "Team-B-CM7SD-Alpha_final.img".
Click to expand...
Click to collapse
That .img file is what you used to create the sdcard your wife and you used. Just as with the recovery sd card, you take said .img file and burn it to it to create a "bootable" sdcard. Thats not what we want to do now (if you're ready to replace the stock OS). Go to this thread for cm7. See where it says "Internal version 8GB & 16GB Compatiable?" Grab that. That is the rom zip file itself. To get gapps, youll need cm7 compatible gapps, found here.
By "internal storage" do you mean in the recovery card or within the Tablet through USB connection?
Click to expand...
Click to collapse
By internal storage, I'm referring to the internal storage on the Nook itself. (like what you see when you mount it via USB on your computer). It should come up as "My Nook" or something to that effect. If you store the rom zip file here, you will be able to boot into recovery via the sdcard you created, navigate to the internal storage and find the zip file and install it. Now personally, I would recommend, that if you plan on using internal roms, that you should also change the internal recovery to a custom one. With an internal custom recovery, you could swap between various roms without ever needing to use that recovery sd card. You would simply boot into recovery, grab the zip file for whatever custom rom you want to use and install it.
The easiest way to get a custom recovery is via this app here. Simply install the app and flash the custom recovery within it. Its also a great tool to return to stock recovery should you ever need to.
The backup would be my current loaded system - in case I need to get back?
Click to expand...
Click to collapse
Yep.
.
Is this a single menu item on the recovery card or separate commands?
Click to expand...
Click to collapse
Its in the recovery menu there right at the front. You should see something like reboot system, apply sdcard, wipedata/factory reset, wipe cache, install zip, backup and restore. Backup/restore to backup your current installation, install zip to install the rom + gapps, and wipe data/factory reset + wipe cache after installation.
One last thought, on the recovery card I downloaded and included "flash_B&N_Stock_v1.4.3_8-16gb_emmc" which I assume would restore to stock 1.4.3 BN version. Is that prossible? and would that be easier to do and start fresh?
Click to expand...
Click to collapse
I'm not sure what this is. I'll take a look at it.
Cubanluke88 said:
Now personally, I would recommend, that if you plan on using internal roms, that you should also change the internal recovery to a custom one. With an internal custom recovery, you could swap between various roms without ever needing to use that recovery sd card. You would simply boot into recovery, grab the zip file for whatever custom rom you want to use and install it.
Click to expand...
Click to collapse
Read much of the following thread and while I think it will be simpler in the future I assume I can do that at any time. Right?
http://forum.xda-developers.com/showthread.php?t=1458630
Albert Wertz's youtube video throws a lot of stuff into the process which looks very interesting but I think I'll "crawl" around a bit and use recovery card for little longer while I become more familiar with a rooted tablet.
I grabbed the CM7 and gapp zips you pointed to and I'm going to give that a whirl with my current recovery card and post back with results - hopefully good......
Note that if you install cm7 to the device, you are not simply on a "rooted" tablet anymore. You will be on a custom rom that also happens to have root access (most custom roms do). Its also worth noting that cm7 is a custom rom based on Android 2.3.4, so the roms capabilities and limitations will be subsequently limited to what cm7 is capable of. The latest version of Android is 4.1 and we are lucky enough to have a custom rom (cm10) in development based on it.
sawbuck00;33537204.
I grabbed the CM7 and gapp zips you pointed to and I'm going to give that a whirl with my current recovery card and post back with results - hopefully good......[/QUOTE said:
Well it seemed to go smoothly. Currently geting updates downloaded. Back to exploring and experimenting....
Thank you, Cubanluke88, for help and advice. I expect I'll be back in awhile when I'm ready to install the internal recovery app and probably will screw things up at some point but it is my aim to get a better understanding the capabilities......
Click to expand...
Click to collapse
undeeded apps
Been doing some exploring and contemplating addition of a few apps. However, some of the apps loaded with CM7 and Gapps (like car home, phone, camera to name a few) don't make sense on a nook tablet - unless I'm missing a reason they should be there. What is the best way of uninstalling/deleting these or any I may install but discover no need for?
TIA....
sawbuck00 said:
Been doing some exploring and contemplating addition of a few apps. However, some of the apps loaded with CM7 and Gapps (like car home, phone, camera to name a few) don't make sense on a nook tablet - unless I'm missing a reason they should be there. What is the best way of uninstalling/deleting these or any I may install but discover no need for?
TIA....
Click to expand...
Click to collapse
They're there because cm7 is a port of a phone based OS (Android 2.3 was designed for phones). You can disable them but I believe camera is tied to gallery so that could screw up picture viewing and phone might be tied to contacts so that could screw up your contacts database if you use gmail. If you have a file explorer that has root access (I use root explorer, paid app in play store), you can navigate to /system/apps and all the apks for those apps (system apps) are found there. You can add a ".bak" extension to each one, then reboot and see if anything breaks. If for some reason things break really badly, you can always reboot to recovery and just flash the rom on top of it again.
Related
This is for the Nook Tablet 16Gig version only. Do not use with 8Gig version
Introduction
Making a magic SDCard which will take you back to stock 1.4.0 is easy!
This method will allow you to restore 1.4.0 firmware onto your Nook Tablet. Personally, I think holding the buttons and halting the device boot 8 times in a row is a bit time consuming. So, here is how you make a "Magic SDCard".
Instructions
Just follow these 4 easy steps to restore your device to 1.4.0.
Download this file: http://devftp.xda-developers.com/files/AdamOutler/NookTablet/acclaim_update.zip (Do not change the file name. Make sure it is named "acclaim_update.zip" without quotes).
Copy the file on a Micro SDCard.
Insert the Micro SDCard into your Nook Tablet
Turn on your Nook and observe a factory restoration.
Conclusion
This will initiate Recovery Mode and flash the entire zip. acclaim_update.zip will restore your device to stock firmware and wipe all user data. I will be working on other methods and I believe it is possible to force the device to boot it's entire firmware from Micro SDCard.
Troubleshooting
"N" Button is inoperative
solution:
Press and hold the Power and "N" Button until the device reboots.
Continue to hold the Power and "N" button until the device reboots 8 times. This will wipe data and restore the "N" button functionality
SDCard method does not work
solutions:
Ensure you have a Nook Tablet, not a Nook Color (funny as it sounds, this is a big problem)
redownload the acclaim_update.zip
Use the Nook settings menu to format the sdcard
Use a different SDCard
Video walkthrough
This video will walk you through switching firmware versions, rooting, backing up, and several other techniques
At the risk of sounding clueless..... How will placing a .zip file on a non-bootable card help? What about the signed bootloader issue? Are we assuming the Nook Tablet is not broken to the point it will not boot on it's own?
Part of the boot process checks the SD Card for this exact file (and checks the contents I assume). If it exists, it gets executed. Someone else has already confirmed this works, though we can't yet get it to work for any other firmware (ICS, etc).
Nice. Use the old 1.4.0 factory image to restore. Brilliant.
Now if only we can do that with custom roms.
Initial registration process with B&N
Does this .zip boots up just as if the NT came out of the box? if so, would the initial registration process with B&N push the 1.4.1 to us, or rather the NT pulls it from B&N?
It will (I believe) reset it to an out-of-the-box condition. The registration process might pull the update automatically...if you set up wifi. Don't set it up (right away), and you won't have an issue. Go in, root, side-load what you need to block the update, and you should be good to go.
according to BN's website, the update takes 5-10 min to download onto your device, and they instruct you NOT to power it off while this is occurring.
I would think you have a few minutes when it comes up to quickly find and install a few apps you may need for the 'fixing' process, (es file explorer, mount /system), then shut off the wifi.
Worst case scenario, you lose 5 minutes and are forced to restore again...
Just to be clear, this doesn't require root right?
Cubanluke88 said:
Just to be clear, this doesn't require root right?
Click to expand...
Click to collapse
No. Root is not required.
A few painfully obvious noob questions. I have a 16gb sd card installed in my tablet. I have sideloaded numerous apps and they show up on my go launcher. Can I use that sd card to install the download you recommend? I assume you mean download the link you provided to my computer and then side load it to my SD card from the usb port on my computer.
Do I need to port all my side loaded apps from the go launcher onto my computer prior to this installation as the factory reset will wipe out all my third party sideloads?
Sorry for the questions. I'm sure this is obvious to most if not all on here but I learned to use a keyboard with a Underwood manual typewriter in 1957 and I'm just now getting comfortable with windows XP.
AdamOutler said:
No. Root is not required.
Click to expand...
Click to collapse
This is the answer I was looking for and I would also like to thank you very much.
this will save many people!
Can this be done over the new B&N update? I don't have a Nook Tablet yet and was wondering before I buy it if I can still root it.
Kazba1626 said:
Can this be done over the new B&N update? I don't have a Nook Tablet yet and was wondering before I buy it if I can still root it.
Click to expand...
Click to collapse
Yes, this is (currently) it's primary purpose.
What if you haven't received OTA yet?
I am really nervous. I bought my wife a NT for Xmas...i rooted it and loaded it with everything she'd like to have on it. Then, i turned it off, wrapped it, and placed under tree.
When she opens it Xmas morning, will it automatically load this 1.4.Bull****? Is there anything that can be done to prevent the update before it happens so that you don't lose hours of work?
Thanks,
Tommy
Voyaging said:
I am really nervous. I bought my wife a NT for Xmas...i rooted it and loaded it with everything she'd like to have on it. Then, i turned it off, wrapped it, and placed under tree.
When she opens it Xmas morning, will it automatically load this 1.4.Bull****? Is there anything that can be done to prevent the update before it happens so that you don't lose hours of work?
Thanks,
Tommy
Click to expand...
Click to collapse
Okay, so i went in Titanium backup and froze the devicemanger and bn cloud service. That will enable me to NOT receive this update, correct?
If you installed the gapps with indirects root script you shouldnt have to worry about the update as it installs FOTAKill.apk as well which should kill ota updates like this.
Edit: Does this mean the tablet is unbrickable if you end up bricking it by messing with its software?
Thanks so much for this file and the information.
Montisaquadeis said:
If you installed the gapps with indirects root script you shouldnt have to worry about the update as it installs FOTAKill.apk as well which should kill ota updates like this.
Edit: Does this mean the tablet is unbrickable if you end up bricking it by messing with its software?
Click to expand...
Click to collapse
Not yet.. we need to prove it.. however, it will take all the root folder files in the update.zip uncompressed and named in a special way to do that.
I just checked and my wife NT is still 1.0.
What is the improvement of 1.4.0? Seems like i missed it.
And can i use this package to upgrade from 1.0?
Much thanks
. . . i use xda app for gtab. . .
As I only recently purchased the Nook Tablet 16gb with version 1.4.2. There is overflow of information in these forums that has confused me and need some direction. I would like to know if the first thing I should do is to Root it and disable the OTA updates? (eventually I will want to install a stable version of CM9 ICS)
If so, which method is the best to do this? Does rooting happen internally on the NT or do I have to have something set on the SD all the time?
What other abilities will this give me?
Is there a huge benefit to rolling back to 1.4.0 (is it even possible?)?
Guidance will be much appreciated. Thanks !
If you use B&N services/apps then i would stick with stock but 1.4.0 as is the best, no limitations about sideloading which is a must have.
If not still stock is ok i like the eye candy, but if you go for complete access to google play (android market) access then i would go for MIUI, CM7 or CM9.
And better way learn from them is to try them all. My fav is MIUI i love the interface is similar to stock actually in the way of the settings, menus, buttons.
~ Veronica
Thanks for the response Veronica.
Are you saying that if I just want to stay at a rooted state with stock B&N then I should downgrade to 1.4.0 and then root?
Also, are you recommending that if not using any B&N serviced, which I'm not using any B&N services, then I should Downgrade to 1.4.0, root and then load MIUI (or other Rom)?
I would like to take some baby steps and try to really learn as I go along. For instance I've seen CMW being mentioned many times and I haven't been able to find how exactly I install it on the NT. Also ADB for 'pushing' installs onto the NT and I haven't been able find guide for it. Do I need to use both CWM and ADB or ADB first to install CWM and then use CWM to install. And how do these fit with the Rooting processes and is all this done on the microSD card or internally on the NT? I'm just so confused in EXACTLY where does one start.
I installed ICS on the HP Touchpad and that was soooooo easy compared to what I'm finding with the NT.
Thanks again.
jbl0ggs said:
Thanks for the response Veronica.
Are you saying that if I just want to stay at a rooted state with stock B&N then I should downgrade to 1.4.0 and then root?
Also, are you recommending that if not using any B&N serviced, which I'm not using any B&N services, then I should Downgrade to 1.4.0, root and then load MIUI (or other Rom)?
I would like to take some baby steps and try to really learn as I go along. For instance I've seen CMW being mentioned many times and I haven't been able to find how exactly I install it on the NT. Also ADB for 'pushing' installs onto the NT and I haven't been able find guide for it. Do I need to use both CWM and ADB or ADB first to install CWM and then use CWM to install. And how do these fit with the Rooting processes and is all this done on the microSD card or internally on the NT? I'm just so confused in EXACTLY where does one start.
I installed ICS on the HP Touchpad and that was soooooo easy compared to what I'm finding with the NT.
Thanks again.
Click to expand...
Click to collapse
Oh you really don't know where to start, i know with all what we have going right now it can be very confusing BUT for your luck @AlbertWertz have made so many videos explaining step by step of almost everything the rooting part eather internally by using adb and external by using an sdcard.
The main idea is ok i have a 16GB NT with stock 1.4.2 i like and use B&N apps i was to stick with stock but i wan't be able to use the most features as possible and not figure it out and troubleshoot so many things in the way then for those people i recommend stock 1.4.0 simple than that.
Albert and I have posted modified, rooted stock 1.4.0 ROM's so you simply get into CWM and flash them, period.
But If you are the kind of person and also want to learn how to do it from scratch and modify to your taste then use one of the so many methods posted in development section to root: there are 2 options root by using adb and root by using a bootable sdcard.
Brief history of the creation of the sdcard method: many users were having issues setting up adb and making drivers for nook tablet get recognized by windows so they were not able to root so it is why sdcard method was released. and as users were having issues setting up sdcard aswell was created the "burn this image to your sdcard with win32diskimager", method which still some users have issues and i remember have read of one user that after user that bricked his device using the last method mentioned... Oh well there is always risk!!!
PROS OF SDCARD METHOD: no use of PC
CONS OF SDCARD METHOD: you still have to setup your sdcard, format it with fat32 file system and set first partition to Active or LBA: boot (linux) and if that does work then burn the root image using to your sdcard win32diskimager.
...Wot you thought was going to be that easy? nah...
By the other hand if you are the kind of user that don't use (maybe hate) B&N service/apps then good news you have 3 options to pick from: CM7, CM9 and MIUI.
Now if you want to go straight to one of the ROM's mentioned (CM7, CM9 or MIUI) then you simply can prepare a sdcard to boot ClockworkMod (CWM) from it . For that please check here -METHOD #1 and here to know how to set it up!.
Once you re able to boot into CWM from sdcard you can now go ahead and download the ROM of your preference, copy it to your internal sdcard (MyNOOK) and flash it in CWM >> Install .zip from sdcard >> choose .zip from internal sdcard >> pick the copied .zip package and flash it, reboot device and VOILA!
---------------------------------
PS: the link to Albert's video tutorials and to my How-to's/tutorials and videotutorials please read my FAQ, is located in general section and the link has been in my signature for long time now. See below (signature).
Alberts videos are in post #2 of my FAQ. Check his channel (link there) for more videos.
There you will find my tutorial for install and use ADB, and as i say San google is your friend you can find anything refering to the nook tablet if you google like this:
"adb tool" nook tablet,xda
"root" nook tablet,xda
"sdcard root" nook tablet, xda ... etc.
~ Veronica
Veronica
I have two nt one with rooted 1.40 and the second is stock 1.42 with B&N repartion. I am concerned that I might have problems with Installing CM7 because of the B&N 1.42 partions. Shoudd I create a sd with CWM and CM7 I don't use B&N at all.
All the Best
jbl0ggs said:
As I only recently purchased the Nook Tablet 16gb with version 1.4.2. There is overflow of information in these forums that has confused me and need some direction. I would like to know if the first thing I should do is to Root it and disable the OTA updates? (eventually I will want to install a stable version of CM9 ICS)
If so, which method is the best to do this? Does rooting happen internally on the NT or do I have to have something set on the SD all the time?
What other abilities will this give me?
Is there a huge benefit to rolling back to 1.4.0 (is it even possible?)?
Guidance will be much appreciated. Thanks !
Click to expand...
Click to collapse
First thing I would do is go back to BN and have them repartition it for you. It will wipe everything from your nook when you do this but if you just started with it then there is no need for worry.
After that just root it and you will be able to sideload any app you want and have access to the market.
I haven't really read why 1.40 is "better" but mine and my buddies are on 1.42 and can do anything we need to with it after being rooted.
lavero.burgos said:
[snip]
PS: the link to Albert's video tutorials and to my How-to's/tutorials and videotutorials please read my FAQ, is located in general section and the link has been in my signature for long time now. See below (signature).
Alberts videos are in post #2 of my FAQ. Check his channel (link there) for more videos.
There you will find my tutorial for install and use ADB, and as i say San google is your friend you can find anything refering to the nook tablet if you google like this:
"adb tool" nook tablet,xda
"root" nook tablet,xda
"sdcard root" nook tablet, xda ... etc.
~ Veronica
Click to expand...
Click to collapse
Thank you so much for all your help !!!
captkrunch said:
Veronica
I have two nt one with rooted 1.40 and the second is stock 1.42 with B&N repartion. I am concerned that I might have problems with Installing CM7 because of the B&N 1.42 partions. Shoudd I create a sd with CWM and CM7 I don't use B&N at all.
All the Best
Click to expand...
Click to collapse
I know this question wasn't addressed for me, but the answer to your question is that it wouldn't matter. If you repartitioned your device at B&N it just changes the space allocated for the different partitions and won't affect the ability to install CM7. Though I believe with 1.4.2 you would need to boot your device via the charging cable to have it run from the sd card, whether it be CWM or CM7. How you install CWM and flash CM7 is up to you on that part.
cbarth3 said:
First thing I would do is go back to BN and have them repartition it for you. It will wipe everything from your nook when you do this but if you just started with it then there is no need for worry.
After that just root it and you will be able to sideload any app you want and have access to the market.
I haven't really read why 1.40 is "better" but mine and my buddies are on 1.42 and can do anything we need to with it after being rooted.
Click to expand...
Click to collapse
Hmm, if just by rooting you are able to install any Android app, then what is the need to load CM7, CM9 or MIUI?
With the stock nook root, Google Play doesn't recognize the nook as a proper android and there are lot of games or apps unavailable to you even if you try to modify the build.prop files within the system folder to mimic another device (i tried T_T)
I personally didn't like any of the barnes and noble interface thats why I went for CM7. I was kind of hoping for bluetooth as well, but from what I'm reading on the android dev part of the forums, the hardware might not support it. With CM7/CM9 it's just more customizable so if you were looking for a cheaper tablet alternative you would root it through those means. But if you like the barnes and noble content, you would root it through stock.
Also with videos, I'm not entirely sure, but I believe with the stock root, even with MX player, HW decoding is only available to mp4 formats, while on CM7 and the other roots, you have larger variety:
"HW Decoding is limited to 3GP, 3G2, MP4, M4V, MKV, WEBM, H.264 (Baseline/Main/High profile) up to 1920x1080, MPEG-4 Simple/Advanced Simple profile up to 1920x1080, & H.263" <- succulent in another post
I'm the in exact position of the OP. Someone gave me a Nook Tablet the other day and all the root/ROM info out there in overwhelming to take in.
Some people are saying there's issues booting to an SD card with 1.4.2, some people don't seem to have a problem. What's the deal here? I've followed every guide to a T and can't get mine to boot off an SD card so I can flash CWM...
(I don't intend for this to be a thread jack. I'm hoping it will also help the OP)
Ok I am not a nooby to rooting and have done it on many devices.
I will say this though I have never seen so many different ways to root one device.
So far I like the sd card root method. But any way here are my questions.
1. what is the best way to Root? Possibly the Sd card way?
2. How Do I repartition the Nook To be able to Utilize the 13Gb of space on it
3.Is there a way to sideload the Android Market (Google Play)?
4. How do you put on CWM
5. What is the most stable Rom that gets rid of bloatware and feels the most like Gingerbread. If its CM7 which version.
If you want you can just point me to Thread links. I am not afraid to read or anything. Its just that there seem to be 7 ways to everything I just asked about and its a little confusing to know which direction to go.
So any help would be appreciated. Thanks so much.
1. The SD card way definitely.
2. Easiest thing to do is take it to B&N and have them do it. You can do it yourself though with this thread.
3. If you only root, the sd card way of rooting will automatically add the play store.
4. Indirect has an app here that will allow you to flash CWM or the stock recovery (the latter option is good for if you ever need to return the device to stock conditions). Simple and easy. This app is actually included with the sdcard root method (it'll be on the sdcard after you burn the image to the sdcard). So once you are in the B&N OS with root access, you'll be able to use a file manager to find the apk for this app, install it and then flash CWM.
5. CM7 Final is the basis for the other CM7 roms. CM9 is cool too though, albeit hardware acceleration does not work yet so things like Netflix and higher end games do not work. I've also listed all current roms that are out for the nook tablet here.
It sounds like you have a decent idea of what you're doing and possibly some experience with Android so you know the drill. Read thoroughly and follow directions to the T and you will be fine. Good luck.
Cubanluke88 said:
1. The SD card way definitely.
2. Easiest thing to do is take it to B&N and have them do it. You can do it yourself though with this thread.
3. If you only root, the sd card way of rooting will automatically add the play store.
4. Indirect has an app here that will allow you to flash CWM or the stock recovery (the latter option is good for if you ever need to return the device to stock conditions). Simple and easy. This app is actually included with the sdcard root method (it'll be on the sdcard after you burn the image to the sdcard). So once you are in the B&N OS with root access, you'll be able to use a file manager to find the apk for this app, install it and then flash CWM.
5. CM7 Final is the basis for the other CM7 roms. CM9 is cool too though, albeit hardware acceleration does not work yet so things like Netflix and higher end games do not work. I've also listed all current roms that are out for the nook tablet here.
It sounds like you have a decent idea of what you're doing and possibly some experience with Android so you know the drill. Read thoroughly and follow directions to the T and you will be fine. Good luck.
Click to expand...
Click to collapse
Holy cow your awesome!! Thank you soooo much. Have y'all considered stickying those threads? You guys have alot of information here. One more thing. If I am understanding you correctly your saying that if I use the sd card root method, it automatically puts on google play? That would be awesome if it does.
Again thanks a million.
Sent from my DROID BIONIC using Tapatalk
After I put on CM7 will google play still be there?
Sent from my DROID BIONIC using Tapatalk
Actually looking at the list of apps that is included with the root script, it doesn't seem the play store is listed. Regardless, its trivial to add.
And if you decide to go custom rom, its as simple as flashing gapps after you flash the rom.
---------- Post added at 02:57 PM ---------- Previous post was at 02:55 PM ----------
Google mandates that the play store and other google apps cannot be included with roms. However, you can fetch google apps from here and flash them after flashing an AOSP rom like CM7 or CM9. Just make sure you flash the right ones (i.e. cyanogenmod 7 package for CM7).
Cubanluke88 said:
Actually looking at the list of apps that is included with the root script, it doesn't seem the play store is listed. Regardless, its trivial to add.
And if you decide to go custom rom, its as simple as flashing gapps after you flash the rom.
---------- Post added at 02:57 PM ---------- Previous post was at 02:55 PM ----------
Google mandates that the play store and other google apps cannot be included with roms. However, you can fetch google apps from here and flash them after flashing an AOSP rom like CM7 or CM9. Just make sure you flash the right ones (i.e. cyanogenmod 7 package for CM7).
Click to expand...
Click to collapse
Well my friend. You just made my life a ton easier. Sincerely Thank you. Now I can't wait for my Nook Tablet to get here. It will probably be on Wednesday.
Sent from my DROID BIONIC using Tapatalk
is there any pitfalls if you partition the drive where you have all 13 gigs available to you and none for the B&N section of the tablet?
I called B&N and they said if they partition it they do about half and half and will not give you access to the whole Hard Drive. Boo!!
Basically, if you opt for more "media storage" then you forfeit space for /userdata which is app install storage.
This step:
Give a value between 11.6 and 13.6 that will leave you with>> 11.6GB: 4GB for /userdata | 13.6: 2GB for /userdata
Click to expand...
Click to collapse
Basically portrays the min/max potential here. If you opt for 11.6 "media" storage, then you will be left with 4GB for app installation. If you opt for the max, 13.6GB, then you will be left with 2GB app installation.
You could always redo it as well I believe.
Cubanluke88 said:
Basically, if you opt for more "media storage" then you forfeit space for /userdata which is app install storage.
This step:
Basically portrays the min/max potential here. If you opt for 11.6 "media" storage, then you will be left with 4GB for app installation. If you opt for the max, 13.6GB, then you will be left with 2GB app installation.
You could always redo it as well I believe.
Click to expand...
Click to collapse
Hey brother now that I have the Nook partitoned and have CM7 what's the best way to access the 8 gigabytes for user data via the pc?
ps thank you for all of the help you gave me and for pointing me in the righ direction. You made this pretty simple
Thank you!!
Sent from my Nook Tablet using Tapatalk 2
Check out this post for changes that can be made to the build.prop file: http://forum.xda-developers.com/showthread.php?p=23487384
I thought these changes were made to the rom but maybe not. If these lines in your build.prop file are different, change them to look how they're shown in this post and you should be able to mount the internal media storage and your sdcard.
Note that if you decide to try cm9, there is no support yet for mounting the internal media on a computer.
Sent from my Xoom using Tapatalk
same boat, with additional ? about list item #4
I was able to complete item#1(sd card root method), without a hitch. It looks like the only place to flash cwm (item#4) is internal mem. Is there a way to flash to an sd card, so I can choose to pull out sd and boot to stock rom if I wanted to? Thanks
...or maybe I can already boot to CWM from this sd boot, but I'm just not doing it yet(don't know how)?
barfcark said:
I was able to complete item#1(sd card root method), without a hitch. It looks like the only place to flash cwm (item#4) is internal mem. Is there a way to flash to an sd card, so I can choose to pull out sd and boot to stock rom if I wanted to? Thanks
...or maybe I can already boot to CWM from this sd boot, but I'm just not doing it yet(don't know how)?
Click to expand...
Click to collapse
Sounds like you want to make a bootable CWM SD card: http://forum.xda-developers.com/showthread.php?t=1446987
I will have to check that when I get home. Is there a way to make the Icons bigger kind of like the I-pad? No I wont be using cm9. I need a fully functional Android Tablet.
Sent from my DROID BIONIC using Tapatalk
swc2001 said:
Is there a way to make the Icons bigger kind of like the I-pad?
Click to expand...
Click to collapse
there is that app 'spare parts' ?
swc2001 said:
No I wont be using cm9. I need a fully functional Android Tablet.
Click to expand...
Click to collapse
yes, count me as being the same way. cm7 is 'really' good for being called an alpha. a little bird tells me it never will be fixed up . . . shame . . . ( on the twelfth of never ? )
Im confused...
Edit:Made a new thread, seems i had more questions than i thought...
Just a quick question don't wanna make a new thread for this:
What i want to do is extend my media drive for my own books and videos and also id like to Root via the sd card method as mentioned in the 2nd post here.
I'm wondering in which order to do it all though.
1. should i get adb tools working first doing the first part only in this video (as instructed in this thread i think?)and then use the CWM included in the sd-card method?
Or
2. Start with the sd card method and then install adb tools and extend my media partition?
Also do i need to worry about the Tools part which is the 3rd thing you need for extending your partition, unless something goes wrong?
Hey Everyone,
So here's what's happening:
I have an original Nook Tablet (16GB) v1.4.0 with Blocked OTA updates. Well I did...it's sort of dead now.
Initially, I purchased the device for my son on Christmas 2011. Back then, we only had 'Indirect's' ZergRush exploit to root and install CWM on Nook Tablets. There wasn't a whole lot to choose from. The Bootloader was still locked and there were no Custom ROMs in sight.
This actually worked fine for us, since my son got to enjoy his new rooted Nook Tablet with all the benefits of a 7" Android Tablet, yet he still got to enjoy the 'Nook Tablet Experience', as he's purchased/downloaded over a dozen Nook Books over this past year.
Earlier today, I went to turn on his Nook Tablet and instead of it booting up like normal, it fell into an endless bootloop.
It would power on, I could see the 'n' logo along with the verbage at the bottom that mentions the Adobe Flash technology and that's it. It keeps doing that over and over again.
Now since I do have quite a bit of hacked android devices, in this situation I would normally just manually boot into Recovery and flash my Nandroid.
Well, for whatever reason, I guess that's not possible here. No matter what I do, it's stuck in that horrible bootloop.
I found a thread on here where I can make a bootable MicroSD Card that would boot me into CWM. From there I could restore the Nandroid.
I actually 'made' this MicroSD Card, or I thought I did...but unfortunately the Nook Tablet will not boot AT ALL from it. So if I leave the Micro SD Card in the Nook Tablet, it's pretty much dead. It won't turn on, power on or anything.
As soon as I take out that MicroSD Card, there goes the bootloop once again.
Question(s)
1. - Does anyone have the correct files or a better way, so that I can make this bootable MicroSD Card, so that I can boot into Recovery and flash the Nandroid?
In case this doesn't work, I did make another MicroSD card that contains the v1.4.2 Stock Partition Image. Apparently, I can boot off this and it will do a Factory Restore of the Nook Tablet, running v1.4.2 Stock. It will not be rooted or anything.
2. - If I go this route, what are my options for rooting and installing custom recovery on v1.4.2?
3. - If I do choose to do this, I may just look into a Custom ROM. That said any recommendations?? I would prefer JB over ICS. I would prefer a VERY CLEAN, FAST, lightweight ROM, over heavy mods.
The one consideration is that it needs to still allow us to utilize the native Barnes & Noble functions, where we can sign into our account, download books from our library, purchase and download books and etc.
Again, if I can just boot into CWM and flash his Nandroid, that would be a hell of a lot less work. But if not, then so be it.
Thank you!
BJ
this is cwm
b1ggjoe said:
Hey Everyone,
So here's what's happening:
I have an original Nook Tablet (16GB) v1.4.0 with Blocked OTA updates. Well I did...it's sort of dead now.
Initially, I purchased the device for my son on Christmas 2011. Back then, we only had 'Indirect's' ZergRush exploit to root and install CWM on Nook Tablets. There wasn't a whole lot to choose from. The Bootloader was still locked and there were no Custom ROMs in sight.
This actually worked fine for us, since my son got to enjoy his new rooted Nook Tablet with all the benefits of a 7" Android Tablet, yet he still got to enjoy the 'Nook Tablet Experience', as he's purchased/downloaded over a dozen Nook Books over this past year.
Earlier today, I went to turn on his Nook Tablet and instead of it booting up like normal, it fell into an endless bootloop.
It would power on, I could see the 'n' logo along with the verbage at the bottom that mentions the Adobe Flash technology and that's it. It keeps doing that over and over again.
Now since I do have quite a bit of hacked android devices, in this situation I would normally just manually boot into Recovery and flash my Nandroid.
Well, for whatever reason, I guess that's not possible here. No matter what I do, it's stuck in that horrible bootloop.
I found a thread on here where I can make a bootable MicroSD Card that would boot me into CWM. From there I could restore the Nandroid.
I actually 'made' this MicroSD Card, or I thought I did...but unfortunately the Nook Tablet will not boot AT ALL from it. So if I leave the Micro SD Card in the Nook Tablet, it's pretty much dead. It won't turn on, power on or anything.
As soon as I take out that MicroSD Card, there goes the bootloop once again.
Question(s)
1. - Does anyone have the correct files or a better way, so that I can make this bootable MicroSD Card, so that I can boot into Recovery and flash the Nandroid?
In case this doesn't work, I did make another MicroSD card that contains the v1.4.2 Stock Partition Image. Apparently, I can boot off this and it will do a Factory Restore of the Nook Tablet, running v1.4.2 Stock. It will not be rooted or anything.
2. - If I go this route, what are my options for rooting and installing custom recovery on v1.4.2?
3. - If I do choose to do this, I may just look into a Custom ROM. That said any recommendations?? I would prefer JB over ICS. I would prefer a VERY CLEAN, FAST, lightweight ROM, over heavy mods.
The one consideration is that it needs to still allow us to utilize the native Barnes & Noble functions, where we can sign into our account, download books from our library, purchase and download books and etc.
Again, if I can just boot into CWM and flash his Nandroid, that would be a hell of a lot less work. But if not, then so be it.
Thank you!
BJ
Click to expand...
Click to collapse
this is a link to download cwm "mediafire .com/?tpckcmp9pr5e826" i had to put a space between "mediafire and .com" cuz the forum wont let me post links yet. Just put this file on a micro sd card..turn nook off and insert card... and when you turn on the nook is should boot to recovery..hope this helps
Systems6,
I went ahead and downloaded your .zip, and extracted the files and placed them on the root of the SD Card. I placed the SD Card back into the NT. Still no dice, not booting up at all. Any other suggestions?
Thx.
BJ
hope this helps you out...
b1ggjoe said:
Systems6,
I went ahead and downloaded your .zip, and extracted the files and placed them on the root of the SD Card. I placed the SD Card back into the NT. Still no dice, not booting up at all. Any other suggestions?
Thx.
BJ
Click to expand...
Click to collapse
well it looks like you have to reboot to stock...then root and flash rom again...here is the link to return to stock "http://raywaldo .com/2012/06/make-unbrick-repartition-image/" again i put a space in between the 'raywaldo and .com"...looks like your going to take the long route to fix it good luck hope you get it running again
** UPDATE:
I was able to follow the instructions on the following thread and made a bootable MicroSD Card running CWM v5.0.2.8:
http://forum.xda-developers.com/showthread.php?t=1640958
Once I was booted into CWM, I tried to do a Nandroid Restore, the way I always have. Unfortunately, I got the following error message:
'MD5 mismatch!'.
Now, I have never encountered this. I made sure that MD5 Signature verification was toggled 'Off'. Not sure if that would have made a difference or not.
Unfortunately, it didn't help. Now I'm stuck with a Nandroid that I cannot restore.
Can anyone suggest something for me to try, in order to try to restore this Nandroid? If not, I will go Plan B and restore to Factory v1.4.2.
However, if I go that route, I still would like some answers to my initial questions about which ROM to go with and etc. Might as well go to JB if I have to start all over.
Thanks!
BJ
Plan B starting to look better and better...
Well here another plan B that was tested earlier and it took 15 minutes from start to finish.
If you want to go to JB then I would recommend this rom and the only thing that you can't do on BN app is that you will not be able to use the books that have record your voice in book or play the read to me books (I think once you are not on the stock bn rom, those two parts stop working). I run kindle app for library loans, overdrive other e-readers without problems,
b1ggjoe said:
** UPDATE:
I was able to follow the instructions on the following thread and made a bootable MicroSD Card running CWM v5.0.2.8:
http://forum.xda-developers.com/showthread.php?t=1640958
Once I was booted into CWM, I tried to do a Nandroid Restore, the way I always have. Unfortunately, I got the following error message:
'MD5 mismatch!'.
Now, I have never encountered this. I made sure that MD5 Signature verification was toggled 'Off'. Not sure if that would have made a difference or not.
Unfortunately, it didn't help. Now I'm stuck with a Nandroid that I cannot restore.
Can anyone suggest something for me to try, in order to try to restore this Nandroid? If not, I will go Plan B and restore to Factory v1.4.2.
However, if I go that route, I still would like some answers to my initial questions about which ROM to go with and etc. Might as well go to JB if I have to start all over.
Thanks!
BJ
Click to expand...
Click to collapse
I got the MD5 mismatch error once when I renamed the Nandroid backup directory. I don't think it liked the spaces in the directory name. Try renaming it to the original name (if you even changed it).
There is a link in my signature that works to root at the very least firmware 1.4.3. Anything that you purchased from the B&N store will still be there if you restore to stock, if you install the Android Market again, anything you purchased will still be there (and you can go online and see anything free that you had installed, and install it from there).
If you do choose to install another ROM, same thing. Books purchased from the B&N Market should be available in the Nook app from the marketplace (I have not confirmed this with my own tablet, though).
confirmed on nook color
liquidzoo said:
There is a link in my signature that works to root at the very least firmware 1.4.3. Anything that you purchased from the B&N store will still be there if you restore to stock, if you install the Android Market again, anything you purchased will still be there (and you can go online and see anything free that you had installed, and install it from there).
If you do choose to install another ROM, same thing. Books purchased from the B&N Market should be available in the Nook app from the marketplace (I have not confirmed this with my own tablet, though).
Click to expand...
Click to collapse
I have done this with a nook color and it works.
[See post http://forum.xda-developers.com/showpost.php?p=43326042&postcount=123 for the new version of this post with updated links/pointers to Succulent's recent CM10.1 builds as well as CWM/TWRP recovery tool compilation].
[Caveat emptor: adopt/follow this guide at your own risk].
I've been running CM10 build by XDA Developer Succulent version 12/08 on SD card since its release ten days ago, and its reliable/stable performance has crossed the threshold for me to finally take the plunge and install it internally on emmc.
FWIW, here the process I used to install CM10 internally on my 16GB Nook Tablet (i.e., on its emmc).
Using a disk partition tool (such as MiniTool Partition Wizard Home Edition) create on SD card a Primary FAT32 partition, and set the partition ID type for the partition to 0x0C FAT32 LBA and set its Active flag. Once this is done, the partition should appear as a (read/write accessible) drive under Windows. If you are going to use this card for backing up your NT, keep in mind that each backup will require at least 600MB (for a barebone stock or CM config) and size the partition accordingly.
Obtain and copy to the SD card the following files:
MLO, u-boot.bin, and flashing_boot.img in SD_boot.zip obtained from http://iamafanof.wordpress.com/2012/11/11/how-to-guide-bootable-cm7cm9cm10-sdcard-for-nook-tablet/
either one of the two recovery program image files: cwm_6012_sd.img (ClockworkMod Recovery (aka CWM)) in CM9-10_CWM_v6.0.1.2_8-16gb_tools_sdcard.zip, or twrp_2220_sd.img (TeamWin Recovery Project (aka TWRP)) in CM9-10_TWRP_v2.2.2.0_8-16gb_tools_sdcard.zip from http://forum.xda-developers.com/showthread.php?t=1640958, rename it to recovery.img. If you want to try out (or use) both, name your alternate choice altboot.img.
the file cm-10-yyyymmdd-UNOFFICIAL-acclaim.zip from http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/
the file gapps-jb-20121011-signed.zip from http://goo.im/gapps/gapps-jb-20121011-signed.zip
Put the SD card into the NT, and boot from its power off by inserting a powered USB cable. Press and hold the N button as soon as CyanoBoot comes up to get the boot menu to display.
Select either SDC Recovery (or Alternate Boot depending on which recovery tool you want to use).
Select Backup to backup your current NT config (/boot, /recovery, /system, and /data). Before proceeding to next step, see note (ii) near the end of this post.
Select Wipe data & factory reset.
Select install zip from SD card and install cm-10 zip file.
Select install zip from SD card and install gapps zip file.
Select power of and remove SD card from NT and power NT on again using the power button (alternatively you can just remove SD card and select reboot).
Once the NT boots up, set up the wifi connectivity and your google account info. If you had previously used Google backup service your apps will be auto-downloaded (but their settings will not be auto-restored)
A few additional points worth noting:
Installing CM10 ROM and gapps will override your NT's BN-provided boot, recovery, ROM, and Apps, so make sure that you backup all this stuff using backup process in step #5 above, safekeep the backup data on your PC/Laptop and better yet archive it on CD/DVD. Your media files in the NT media partition BN allocates for user should be intact.
To play it safe you should do the above in 2 phases: steps 1 through 5, then exit recovery and remove and mount SD card on PC to verify that backup data got newly created; then insert SD card and continue steps 6 through 9.
CWM and TWRP use different backup archive formats, so keep this in mind if you decide to switch. Furthermore, CWM has changed its archive format going from release 5.x to 6.x, so I think it would be prudent to save a copy of the recovery program together with the backup data it generated. (FWIW I prefer the tar/zip compatible backup data structure TWRP uses (which CWM 5.x had also used) over the BLOb structure which CWM 6.x use -- but YMMV).
To restore from backup data, boot into SD card and select from boot menu the same recovery program that was used to create the backup data, then select the particular backup dataset (indexed by date/time) you want to reinstall on your NT.
I would advise against blindly using other functions of the CWM and TWRP without looking up info and researching to understand what they really do.
See my post at http://forum.xda-developers.com/showthread.php?p=48612997#post48612997 for more "Info and Tips for Mitigating Risks in Rooting and Flashing Custom-ROM".
My thanks to all the developers who collective work created this wonderful ROM as well as the tools and info I made use of to install it. IMHO this ROM helps make the Nook Tablet one of the best-value tablets for the money (at least at the moment).
great post...fwiw here's my experience to get two NT16's up and running (I started with an old CM7 on both of them).
Backup nook with titanium backup on existing 32GB card.
Take screenshots for replacements
Reset nook to stock (1.4.2) and update to latest (1.4.3) with a fresh SD Card with repart.img copied to root (my red 2GB card):
http://raywaldo.com/2012/06/make-unbrick-repartition-image/
http://www.youtube.com/watch?v=Nu6e4m62tFc
c. 1.4.3 can be downloaded from B&N site directly. (http://www.barnesandnoble.com/u/Software-Updates-NOOK-Tablet/379003187/)
Create a CWM SD Card (ideally 4GB SanDisk) as per these instructions - http://raywaldo.com/2012/05/root-nook-tablet-with-cwm-sdcard/
Copy CM7 BETA and compatible GAPPS onto this card or another blank one. You can get the files from here: http://forum.xda-developers.com/showthread.php?t=1481826 and http://wiki.cyanogenmod.com/wiki/Latest_Version/Google_Apps
Boot into this CWM Card, wipe data/wipe cache and dalvik cache. Install zip from sdcard (either current or pop in the new one). Choose cm-7 beta first, then gapps. Remove sd card. Reboot. Wait a while for it to set itself up.
Go into settings/applications and clear the cache for google market/play.
You now have CM7 installed and can setup the basics (google, wifi etc..)
Insert your 32GB (or 16 or 8 or whatever) Sandisk SD Card (it should ideally have the Titanium Backup folder from step 1, any media you want in Music and Movies folder and the CM10 and gapps zip in the downloads folder -- and that's it!)
Once mounted, download Goo Manager from the google play store and run it, accepting superuser requests.
Choose settings menu and "Install OpenRecoveryScript" and it should install openrecovery twrp recovery manager. Once it has installed and informed you of success, reboot into recovery (this is important), upon reboot hold the "n" and choose internal emmc recovery from the menu.
You will now find yourself in TWRP. From the install menu, add the CM10 PURE AOSP 4.1.2 JBV06.1-Hashcode and then the gapps-jb-20121011-signed.zip and swipe to confirm flash. This is it. Fingers Crossed!
NOTE: On one NT 16 (I have two), step 12 DID NOT WORK. It wouldn't install the CM10...zip -- and simply rebooted itself or hung...so I powered off, and rebooted to the CWM Card in #6..and used CWM to wipe caches etc… and then installed the two zips...and voila.
hope it helps.
digixmax said:
I've been running CM10 build by XDA Developer Succulent version 12/08 on SD card since its release ten days ago, and its reliable/stable performance has crossed the threshold for me to finally take the plunge and install it internally on emmc.
Click to expand...
Click to collapse
How do you feel about it now that you've installed it internally? I took the plunge as well today, but I'm not sure it's runs any better internally than it does from the sd card. Having said that, it runs so incredibly well from the card, so it's really hard to beat, but still... I'm actually having more issues with the internal install than the sd version.
I had had enough of the stock reader (that I'm actually pretty fond of) not remembering my place in sideloaded books, so I didn't feel I had anything to loose and am glad I made the install though. Installed once makes it easier to reinstall when an even better build comes along.
I made the switch since the stock ROM was so barebone and clumsy I virtually never use it since I had the NT, and the rooted stock ROM is just marginally better -- I found out there are so many apps I 've been using on CM10 that are simply not available for BN's (Android) Gingerbread. I also like the fact that I can now reboot (if ever needed) untethered.
I think performance-wise it runs about the same as it was running on SD, if it's better then it's not yet noticeable.
What kind of issues are you having with your new setup?
Some apps misbehaved. Didn't install properly or gave error messages. I decided to re flash and this this second install hasn't had any issues at all. Same files from the same card.
It is nice to have it internally and be able to switch sd cards should I want to.
Sent from my Barnes & Noble Nook Tablet using Tapatalk 2 and SwiftKey
I ran into a problem with v12/08: when I connect the NT to the PC I do not get the “USB connected” notification with option to “turn on the USB storage”, and thus cannot access neither the emmc media partition nor the sdcard. The problem exists with both CM10 running on emmc and running on sdcard. Furthermore when running on sdcard, hitting “storage” in “settings” results in a force-close of “settings”.
I am curious if anyone else has the same problem, or I am just missing some setup setting somewhere.
In the meantime, I am back to running another ROM off SD.
Those storage setting issue I had with the 1118 build but not with later ones. Connection to PC work fine but I don't think I need to do the turn on USB thing. No PC nearby at the moment
Edit: I am now near a PC, and I do get the "touch to turn on USB" or words to that effect. So it works as it should..
Sent from my Nook Tablet using Tapatalk 2 and SwiftKey
Thanks, I've tried reinstalling a couple of times (as well as installing a different ROM) without success.
I found the answer to my problem: I was used to getting the full-screen alert “USB mass storage” (upon insertion of tethered USB cable), and didn’t notice the tiny alert “USB connected” on the status bar (which when pulled down would in turn launch the “USB mass storage” alert).
Question: I'm not new to rooting and flashing, but am new to NT. I rooted my wifes NT, installed a launcher to switch back and forth, and loaded a few apps. I did not change the stock recovery and used a boot sdcard to run an older version of CWM. I forgot to hack OTA off so while messing around the darn thing upgraded to 1.4.3. The stock rom is such an old version of GB it is really worthless. So here is my question. Can I use this method to go directly to CM10? Im not too concerned about the issues mentioned in this thread, but more concerned about the method and the type of issues I might encounter. I see some threads say to flash CM 7 first, why I'm not sure. It almost looks to simple. Just looking for confidence. If it were mine I wouldnt care. Thanks for any help.
Sent from my SAMSUNG-SGH-I317 using xda premium
Dean1650 said:
Question: I'm not new to rooting and flashing, but am new to NT. I rooted my wifes NT, installed a launcher to switch back and forth, and loaded a few apps. I did not change the stock recovery and used a boot sdcard to run an older version of CWM. I forgot to hack OTA off so while messing around the darn thing upgraded to 1.4.3. The stock rom is such an old version of GB it is really worthless. So here is my question. Can I use this method to go directly to CM10? Im not too concerned about the issues mentioned in this thread, but more concerned about the method and the type of issues I might encounter. I see some threads say to flash CM 7 first, why I'm not sure. It almost looks to simple. Just looking for confidence. If it were mine I wouldnt care. Thanks for any help.
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Cm7 is a gingerbread rom, it can be flashed by cwm 5 and 6 both. But cm10 is jellybean and must be flashed with cwm 6 only (or twrp) . And once you have cm7, you get cyanoboot (2nd bootloader) which is necessary to load cwm6, whether its internally flashed recovery or SD card recovery.
If you still have your bootable SD card, boot into recovery and check the version (cwm 5 most likely) , then do the longer, but simpler method - stock > cm7 > flash cwm6 internal and boot into it from cyanoboot > cm10.
I see the difference between the 2 methods..a few more questions. I dont see where or how recovery gets flashed in the first method. Looks like either/both are used but not flashed. In both methods, I dont see any sdcard additional partition requirements so can I assume everything can get copied to the boot partition? Haven't looked at the card I made yet, but if CWM is current enough for CM7 it should work fine. I appreciate this thread. It has cleared up a lot of questions.
Sent from my SAMSUNG-SGH-I317 using xda premium
Dean1650 said:
...
I forgot to hack OTA off so while messing around the darn thing upgraded to 1.4.3. The stock rom is such an old version of GB it is really worthless. So here is my question. Can I use this method to go directly to CM10? Im not too concerned about the issues mentioned in this thread, but more concerned about the method and the type of issues I might encounter. I see some threads say to flash CM 7 first, why I'm not sure. It almost looks to simple. Just looking for confidence. If it were mine I wouldnt care. Thanks for any help.
Click to expand...
Click to collapse
Yes, you can use this process to go directly from stock or rooted stock to CM10 -- I used it to go from rooted 1.4.3 directly to CM10. With SD-based flash, there is no need to go the circuitous multi-stage flashing process.
And if you use Succulent's CM10 builds from http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/ his ROM zip files all include emmc recovery so you don't even have to separately flash recovery as you would have with other ROMs. I think his approach, in addition to being convenient, has the benefit of avoiding intermediate states where there is potential incompatibility between ROM and recovery versions (which I think is conducive to causing bootloop).
Of course if for some reason you later prefer a different version of recovery than the one he includes (CWM 6.0.2.5) you can always reflash your particular choice of recovery by itself.
FWIW I am running Succulent's cm-10-20121225-acclaim-HD.zip (GCC 4.6) at the moment and it works great.
Dean1650 said:
I see the difference between the 2 methods..a few more questions. I dont see where or how recovery gets flashed in the first method. Looks like either/both are used but not flashed. In both methods, I dont see any sdcard additional partition requirements so can I assume everything can get copied to the boot partition? Haven't looked at the card I made yet, but if CWM is current enough for CM7 it should work fine. I appreciate this thread. It has cleared up a lot of questions.
Click to expand...
Click to collapse
Everything that gets flashed via recovery (either CWM or TWRP) comes in zip archive form, and this applies to ROM, gapps, as well as recovery itself. (If you ever want to flash recovery, the simplest way is to get a recovery zip file, such as one of those with keyword emmc from http://forum.xda-developers.com/showthread.php?t=1640958, and flash it from SD using the process in the first post, just as you would flash a ROM build or gapps).
If you are curious about what gets installed and where, just open (but don't extract) the to-be-flashed zip file (e.g., using winrar/winzip/7-zip): everything except the META-INF folder is what get installed, and the updater-script file in META-INF\com\google\android\ (which you can open using a text editor like notepad) contains installation script detailing where (i.e., which partition on the NT) various components of the zip file get installed.
Typical ROM builds zip contain boot.img which gets installed on /boot partition, and a bunch of system files and apps to be installed on /system partition. Succulent's ROM builds also include recovery which gets installed on /recovery partition. Finally gapps apps get installed on /system as well.
Really, really appreciate this OP, the replies, and the knowledge. VERY helpful. Wont do this til the 1st and will let you know the results... Again, THANKs
Sent from my SAMSUNG-SGH-I317 using xda premium
Well your method worked flawlessly. I had a few minor operator errors but it went just as you explained. I did, however, have a fatal bug in the rom. Not sure who to report it to, but while messing around in settings I tried to change the color of the clock in the status bar. It totally blew away systemui. I tried everything I knew of to restart and recover but had to resort to wipe/factory reset. Could not figure out what data file got corrupted. That in turn made me have to flash the gapps again because none of the Google apps worked including play store. The net result is to add 1 more step to your method. BEFORE messsing with settings, and after the initial setup is complete, boot to recovery and do another backup..I forgot to mention I flashed 20121231, which is the latest release. Thank you so much for your knowledge and reseach. STOCK ROOTED TO CM10 RELEASED.
Sent from my SAMSUNG-SGH-I317 using xda premium
Stuck on backup in CWM 6.0.1.2
My 16gbNT is currently running Team_B CM7. I'm trying to install Kuzma30's CM10.1 from a SD card. Following the instructions from this OP. While trying to perform my backup the process gets about 3/4 of the way through and then sticks at the file named "generic11.lda". It doesn't continue after that and I have left it alone for a considerable amount of time. Any idea what's causing the stick? I've tried it about three or four times with occasionally sticking at different files but it is still about 3/4 of the way through. Backup will not finish.
Any help is greatly appreciated.
I'd suggest trying a version of CWM that is considered compatible with CM7, e.g., CM7-9_CWM_v5.5.x_8gb-16gb_tools_sdcard.zip from http://forum.xda-developers.com/showthread.php?t=1640958 (but then remember to flash CM10.1 with 6.0.1.2).
Also check and make sure that you have enough space on your SDcard (you can/should remove backup data associated with failed partial backup attempts).
Backup success, Install failure
digixmax said:
I'd suggest trying a version of CWM that is considered compatible with CM7, e.g., CM7-9_CWM_v5.5.x_8gb-16gb_tools_sdcard.zip from http://forum.xda-developers.com/showthread.php?t=1640958 (but then remember to flash CM10.1 with 6.0.1.2).
Also check and make sure that you have enough space on your SDcard (you can/should remove backup data associated with failed partial backup attempts).
Click to expand...
Click to collapse
Backup successful! Thanks button pressed. Now on the install I used CWM 6.0.1.2 and I'm not allowed to complete the install. It aborts installation and gives the following error:
"Installing update...
set_perm: some changes failed
E:Error in /sdcard/cm-10.1-20130102-UNOFFICIAL-acclaim.zip
(Status 7)
Installation aborted."
Any ideas?
Your guide is quite clear but somehow it is not working for me. I have a fresh NT 8GB with stock 1.2 on it.
I obtained the 6 files you mention:
- u-boot.bin
- MLO
- flashing_boot.img
- recovery.img (= cwm_6012_sd.img)
- gapps-jb-20121011-signed.zip
- cm-10-20121231-NOOKTABLET-acclaim-HD.zip (from: http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/)
I copied them to a 16GB 10x SD card and placed the SD card in my NT.
The problem is that whatever I do, it always boots the stock os and never into Cyanoboot. I know I have to connect the NT to my computer with USB and wait for it to boot, but even then it only load the stock OS.
Am I doing something wrong here?
Help much appreciated!