Related
So, quick backstory. I have two PC's at home. A brand new win 7 64 bit laptop, and an older XP desktop. Neither will recognize my vibrant, and never have. At work, I have a win XP desktop, and I can connect the phone to that and use mass USB storage and move stuff around just fine, so I've gotten by in that regard in these 6 long months.
Then comes this #$%%^$#$ Froyo update. Who thought it would be easy?
I have downloaded kies on each machine. (As well as ODIN, but same issues.....computer/phone wont communicate). I cannot get my two home computers to connect to the phone, no matter what settings. BTW, I have rooted my phone with OCLF and subsequently un-rooted before trying any of the following. I have not flashed or updated the phone otherwise with any other software, other than what apps are available in the market.
I've tried
-USB Debugging on/off
-all 10 USB ports between the three PC's in all configurations
-deleted all USB drivers and restarted on both computers
-installed the appropriate drivers from samsung for each pc
-wasted 7 hours with samsung support troubleshooting to no avail
The USB cable is fine. The most promising progress is on my work PC, where I got Mini Kies going, connected and started the update, it finished decompressing the binary files, but then a USB not recognized warning pop up and kies kicked out the update.
I have installed, reinstalled the drivers for each system several times with samsung support. Nothing is working.
I don't know what else to do. This is the most frustrating experience in my life. Any suggestions or similar experiences that have been remedied?
I was having promblems also but eventually got it to work for me on an xp machine on stock jfd. It updated me to ji6 then I did the ka6 update when it was released. I gave up on my win7 system lol. Is your xp system 32bit or 64?
Sent from my SGH-T959 using XDA App
same here i have a win7 64 bit machine, i can connect to normal kies 1.51. i tried to update, it downloaded the files and just got stuck when it started putting it on the phone (luckily, it did not start the installation so i was okay).
mini kies shows that it recognizes my phone but crashes immediately after that.
i do not think the vibrant is supported by newer versions of kies, like 2.0.
I solved my problem by using my 32bit xp system.
edit: just FYI, i can connect to normal kies 1.51, sync my data and all that stuff. i also updated to ji6 thru normal kies, and I can transfer files and whatnot thru usb. I do not even think i needed to install the drivers manually
I downloaded Mini Kies 2.0 onto my windows 7 64bit machine and installed the Samsung drivers I have everything worked smoothly. I upgraded 3 phones to Froyo with no issues. here are the drivers I have
http://71.228.63.153/download/usb_drivers_GalaxyS_x64.zip
toeshot said:
I downloaded Mini Kies 2.0 onto my windows 7 64bit machine and installed the Samsung drivers I have everything worked smoothly. I upgraded 3 phones to Froyo with no issues. here are the drivers I have
http://71.228.63.153/download/usb_drivers_GalaxyS_x64.zip
Click to expand...
Click to collapse
I did the Same thing it worked for me as well
The only luck I've had is on a winXP 32 bit machine, but then it cuts off the installation when it suddenly says "USB Not Recognized" (despite, um, the fact that it recognized it at the beginning, otherwise I wouldn't have been able to initiate the update!)
I'll give those Win7 64 drivers a try at home, although I'm pretty sure I have downloaded the same ones in my quest for a solution.
Do you suggest plugging in the phone, then installing the drivers, or leaving the phone unconnected and restarting the computer then trying to connect, or ???? The biggest issue on the Win7 machine is the phone not communicating with it AT ALL. Not even showing up in device manager as unknown or anything.
Moved of: Samsung Vibrant > Vibrant General
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
SOLVED
I finally got it to work, after about 15 attempts! (on a win XP machine)
Here's what I did in case it will help someone else:
When I plugged in my phone, I saw two items in the USB list in device manager. One said "Samsung Android USB Composite Device" (internal SD?), and the other said "USB Mass Storage Device" (external SD?). In this configuration, I got kicked out of the install each time after it "decompressed the binary files".
So what I did on a hunch was go to the device manager and "update" the driver for the USB Mass storage device to the "ssadadb2.inf" file included in the Vibrant USB drivers available directly from Samsung's Vibrant page.
Selected "Samsung Kies" on the USB settings on the phone, turned on USB Debugging, opened Kies on the computer, plugged in the phone, and it did it's thing.
Only took 3 days to figure it out!
Yeah its been a hit or miss. I have win7 x64 on two laptops and my desktop. It works in the desktop and only one of the laptop and I installed the same drivers for all 3
Sent from my SGH-T959 using XDA App
toeshot said:
I downloaded Mini Kies 2.0 onto my windows 7 64bit machine and installed the Samsung drivers I have everything worked smoothly. I upgraded 3 phones to Froyo with no issues. here are the drivers I have
yeah it works for me too, i just installed these drivers and put usb debugging mode. upgrading just now. thanx
Click to expand...
Click to collapse
W/ WIN 7 64 Bit I upgraded my phone to Froyo.
I'm running win 7 SP1 64 bit.
Samsung told me that Kies mini and the driver is not compatible to 64 bit.
After some research this is what I have done and able to upgrad my phone to Froyo.
1. check the USB debugging.
- Samsung says to uncheck it. but if you do, you probably have MTP USB device error. So make sure your USB debugging is on.
2. After the you connect your phone, Samsung Kies Mini keeps crashing??
-Uninstall IE 9.
Solution is...
*Check the USB Debugging and Uninstall IE 9.
**Make your the battery is fully charged.
Connect phone
Start Kies Mini
I got so sick of Windows I switched to Ubuntu Linux. It's free and just as easy to use as windows. No crashes, no viruses, and it sets up as a dual boot so I can use windows when necessary.
My galaxy tab 10.1 is on 3.2 honeycomb official. Its not rooted and its 3g version
My tab would not connect, i have searched for many forms, i could not find the solutions.I have done factory reset twice and have reinstalled kies twice also. My problem still persist. When i connect my tab to my laptop which is running on Windows 7. Three thing happens
1. Some time it will show mtp initializing and then it shows usb connected (mtp connected). No where is galaxy folder on my computer is found. When i go to devices and printer. No galaxy tab icon is shown.
2.Some times, galaxy tab charges only, there is no mtp instializing like 1 scenario etc
3. Nothing will happens.No mtp instializing or no charging
Lastly i have tried on my destop computer and another laptop but the problem still persist
Help would be appreciated.
I would backup my files and factory reset the tab. Should help.
i have done factory reset twice
Make sure debugging is unchecked.. What version of windows are you running?
I find that my tablet will not recognize on XP or Window 7 since I have owned it. (Google I/O bought in July of last year) Once I installed CM9 it would then be recognized through Macbook Pro Android transfer.. (something like that. I sold the Macbook awhile back) I resort to Dropbox.. Its a *****.. But I don't complain and I stream most of my files anyway...
ammad53 said:
My galaxy tab 10.1 is on 3.2 honeycomb official. Its not rooted and its 3g version
My tab would not connect, i have searched for many forms, i could not find the solutions.I have done factory reset twice and have reinstalled kies twice also. My problem still persist. When i connect my tab to my laptop which is running on Windows 7. Three thing happens
1. Some time it will show mtp initializing and then it shows usb connected (mtp connected). No where is galaxy folder on my computer is found. When i go to devices and printer. No galaxy tab icon is shown.
2.Some times, galaxy tab charges only, there is no mtp instializing like 1 scenario etc
3. Nothing will happens.No mtp instializing or no charging
Lastly i have tried on my destop computer and another laptop but the problem still persist
Help would be appreciated.
Click to expand...
Click to collapse
I often connect my tablet to my Win7 PC so I can copy TV shows from Media Center to the tablet. Sometimes the PC doesn't recognise the tablet unless I power down the tablet and turn it back on again. No idea why though.
follow this
download samsung 7510 usb drive, then download kies and last download windows media 11. if your xp its not original, follow some tutorial on youtube about how to install windows media player 11.
i has this issue with windows xp few days ago..
z31k said:
Make sure debugging is unchecked.. What version of windows are you running?
I find that my tablet will not recognize on XP or Window 7 since I have owned it. (Google I/O bought in July of last year) Once I installed CM9 it would then be recognized through Macbook Pro Android transfer.. (something like that. I sold the Macbook awhile back) I resort to Dropbox.. Its a *****.. But I don't complain and I stream most of my files anyway...
Click to expand...
Click to collapse
if you can't connect to a pc, then how were you able to install cm9?
mawells787 said:
if you can't connect to a pc, then how were you able to install cm9?
Click to expand...
Click to collapse
Actually you can. I don't know how he did it but if you want to know here's what I did.
Go here: http://forum.xda-developers.com/showthread.php?p=15693193.
You can root through an update.zip, flashed from the stock recovery (at least for the 3g version). After that install rom manager and flash cwm. Finally download cm9 or aokp or everything else you want and flash away!
Btw, I have no problem connecting to PC. I just did it that way.
Sent from my amazing 10.1 galaxy tab
PC recognizes the tablet but...
The pc recognizes my tablet, but even after it says safe to use, the tablet never shows up under my computer to transfer files. Any suggestions?
Dominus357 said:
The pc recognizes my tablet, but even after it says safe to use, the tablet never shows up under my computer to transfer files. Any suggestions?
Click to expand...
Click to collapse
Do you have MTP enabled under storage > USB computer connection?
Same Problem
ammad53 said:
My galaxy tab 10.1 is on 3.2 honeycomb official. Its not rooted and its 3g version
My tab would not connect, i have searched for many forms, i could not find the solutions.I have done factory reset twice and have reinstalled kies twice also. My problem still persist. When i connect my tab to my laptop which is running on Windows 7. Three thing happens
1. Some time it will show mtp initializing and then it shows usb connected (mtp connected). No where is galaxy folder on my computer is found. When i go to devices and printer. No galaxy tab icon is shown.
2.Some times, galaxy tab charges only, there is no mtp instializing like 1 scenario etc
3. Nothing will happens.No mtp instializing or no charging
Lastly i have tried on my destop computer and another laptop but the problem still persist
Help would be appreciated.
Click to expand...
Click to collapse
I bought a new Samsung Galaxy Tab GT-P7500 yesterday, unboxed it and when i connected it to my laptop for the first time, it showed this problem.. When i connect it to my laptop, it says MTP Initialization, with a message on my laptop "USB Device not recognised" & a 'X' on the battery of my tablet.
I have tried to reinstall the usb drivers & kies several times, but still i am having this problem.. i have bought a new one and not able to use it for 2 days now.. feeling very sad.... Please Help....!!
deepakgupta said:
I bought a new Samsung Galaxy Tab GT-P7500 yesterday, unboxed it and when i connected it to my laptop for the first time, it showed this problem.. When i connect it to my laptop, it says MTP Initialization, with a message on my laptop "USB Device not recognised" & a 'X' on the battery of my tablet.
I have tried to reinstall the usb drivers & kies several times, but still i am having this problem.. i have bought a new one and not able to use it for 2 days now.. feeling very sad.... Please Help....!!
Click to expand...
Click to collapse
XDA is no longer worth my time.
TimOster said:
Read the Kies information on Sammy's site. Make sure you have the settings as they tell you. You can make the tab act like this if USB Debugging is turned on for instance.
Click to expand...
Click to collapse
Thanks for your advice, but i have done everything right as descibed in manuals, but still i am unable to connect my tab to my laptop, as usb connection is the only way to connect, i am feeling very disturbed.... Please help......!!
Sent from my GT-P7500 using xda app-developers app
Problem with computer not seeing phone
deepakgupta said:
Thanks for your advice, but i have done everything right as descibed in manuals, but still i am unable to connect my tab to my laptop, as usb connection is the only way to connect, i am feeling very disturbed.... Please help......!!
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
I had problem with my phone not being seen by my computer, I tried almost everything I read on these forums,
and nothing work, uninstalled drivers, changed settings on my phone, still nothing, then at last I change the setting
by dialing *#7284# (phone utility) made sure UART was set to PDA, USB set to PDA then Qualcomm USB Settings set to MTP,
now my computer sees my phone, I hope this will help others, it worked on mine, I have a Sprint Galaxy Note 2 flashed to Page plus,
with the help of Viper32, I get 3g service, pic messaging etc....
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Srsly? Noone care to respond?
google it for samsung usb driver
then download and install
XeactorZ said:
google it for samsung usb driver
then download and install
Click to expand...
Click to collapse
Thx for reply, but ofc I already done that.
Install Kies, it should be enough
《tapatalked from galaxy s3》
compatibility mode
nerotix said:
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Click to expand...
Click to collapse
Try right click - compatibility mode you should be able to install.
bala_gamer said:
Install Kies, it should be enough
《tapatalked from galaxy s3》
Click to expand...
Click to collapse
Samsung Kies 2.3.3.12085_7_5 work with Windows 8 9200...:good:
I'm using windows 8 x64, I had no trouble installing the drivers.. I just put the phone in download mode and connected the usb cable and the drivers were automatically installed.
Sent from my GT-I9300 using xda app-developers app
Hello all.
I too have Windows 8 RTM 9200 x64.
Kies 2.3.3.12085_7 INSTALLS fine, and the app RUNS fine.
Also, when I put the phone in download mode, Win8 DOES automatically find a device, but....
1. Kies can never find the phone (obviously not when in download, I mean in normal mode). Just keeps telling me to turn off debugging (which is not on!). Tells me: "Reconnect the device in Samsumg Kies (PC Studio) mode. Current connection mode not supported by Kies. Check USB settings."
2. Odin 1.85, 1.87 and 3.04 can never see the phone in download mode. Just nothing as if not connected.
For you guys who have it working in Win8, can you confirm that Kies can actually SEE the phone (running the app is the easy bit!), and that if you go into download mode, that Odin can see the device?
I can pass things thru on a virtual USB port to a Virtual Machine of Win7, but cant never actually get any functional use in (host) Win8.
Thanks.
EDIT: I downloaded Kies from Samsung page and it seems to be very slightly newer than mine, now version 2.3.3.12085_7_5. NOW, Odin CAN see the device in download mode which is what I really wanted for flashing purposes. Kies itself now no longer instantly complains about the USB setting, but iinstead just spins its wheel and never connects. But Kies stinks and never use it anyway, so not too fussed. Really just wanted Odin so that's cool.
Downloaded THIS Kies: http://www.samsungapps.com/about/onPc.as
Can you extract the USB Driver msi from the instllation and upload it here? Thanks!\
Edit:
Found it!
http://www.mediafire.com/?4y1a2opm8o3ihfx
Now my Note is back under my Windows 8 64x RTM!
Interesting!
Your mediafire download LOOKS like the same version that my Kies installed, but when I installed your version over my pre-existing one, now Kies can see my phone!
Excellent!
Thanks!
Hope this all helps someone else too.
I ran Windows 8 for exactly 2 days. I ain't gonna touch that with a 10ft pole ever again. Went back to Win7.
Lemme just tell ya: Windows 8 sucks big time. It's so bad it both sucks and blows at the same time.
nerotix said:
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Click to expand...
Click to collapse
¦¦
\/
Signature that should help you ^^
EDIT: Use the search button. Prevemts spam, and unneccessary threads, like this. I posted that thread in the Android general Discussion and Galaxy Nexus forum. Works on all phones..
I love windows 8 and am going to give these a go. Thank you.
Sent from my SCH-I535 using xda premium
nerotix said:
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Click to expand...
Click to collapse
i just installed win 8 m gonna try win 7 drivers in compatibility mode...will let you knowifit works
---------- Post added at 04:53 PM ---------- Previous post was at 04:37 PM ----------
nerotix said:
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Click to expand...
Click to collapse
hi i just tried windows 7 usb drivers for s3......and guess what ...................IT WORKS.....all you have to do is run the drivers in compatibility mode and select windows seven
First right click on the divers file and select properties
then select compatibility
select "run this program in compatibility mode for"
then select windows seven in the drop down menu
and then select "Run this program as an Administrator"
and then press OK
DONE
double click the driver file and install it.........Enjoy
Simonetti2011 said:
I ran Windows 8 for exactly 2 days. I ain't gonna touch that with a 10ft pole ever again. Went back to Win7.
Lemme just tell ya: Windows 8 sucks big time. It's so bad it both sucks and blows at the same time.
Click to expand...
Click to collapse
Using a 4 year old Dell Latitude XT2 that originally came with Vista on it with a fresh install of Windows 8. Love the device. Multi touch screen works right away and all features work great. Having a blast with Windows 8. Just need the right hardware and it is a perfect operating system. Best of both worlds, tablet and laptop.
There's no need to install Kies to use the phone as mass storage.
Only if you want to flash things though Odin.
I'm using Windows 8 Pro 64bits and I can confirm this. :good:
Windows update Will do the job.
Connect the phone and then search on Windows update.
Sent from my GT-I9300 using xda app-developers app
Hi, got Kies update to 2.5.0.12094_28 and everything works fine under Win8. Drivers insatlled, phone found. The update has got todays date, Nov/10/2012.
Windows 8 upgrade went fine with the samsung/android drivers.. Infact everything is fine on my end (Full win7 img) just incase
Sent from my Transformer Prime TF201 using xda premium
Hello All,
i had a problem with my phone every time plugging in galaxy s3 into windows (xp or 7) i kept getting no hardware id found after flashing my last rom.
just thought i would share how i resolve. very simple steps...
power off and remove battery
uninstall any drivers from windows
insert battery
power on device
once fully booted plug device back into windows and let it search for drivers.
all "should" now be working.
just thought it would be helpful to share as took me a while to find information online.
Got the same problem, with the difference that my S3 is fresh out of the box. Installed kies, drivers. Tried all of the usb-ports but nothing seem to work.
Was looking to root it but the connection (looks to me) would be an must...
W7
64 bits
Standard instructions are to use Samsung cable and a USB port on the motherboard .
jje
JJEgan said:
Standard instructions are to use Samsung cable and a USB port on the motherboard .
jje
Click to expand...
Click to collapse
jups, tried several cables and all of my usb-ports. Still no marriage between phone and desktop
funnily enough i just had this happen to me on my win 7 64bit ultimate, havent flashed any new roms just stock with cf root. All of a sudden my comp gave the sound effect if something was disconnected and I just got hardware id missing.
It did resolve itself though after I rebooted both phone and pc so unfortunately cant narrow it down further.
sandeman11 said:
Got the same problem, with the difference that my S3 is fresh out of the box. Installed kies, drivers. Tried all of the usb-ports but nothing seem to work.
Was looking to root it but the connection (looks to me) would be an must...
W7
64 bits
Click to expand...
Click to collapse
Is KIES loading while you are trying? If so, shut it down.
I've never had to load drivers. Windows always finds them on it's own.
missing hardware id (Win7 64 Home)
Same Problem for me.
I have never used Kies, but installed des Samsung Driver Package Ver. 1.5.6.0 .
For 3 month all worked fine with 2 Galaxy S III, 2 S II and 1 S I.
Since yesterday i have this trouble. Reinstall drivers, shut down phone... nothing helps. Changing USB-Ports, nothing...
Running on Stock XXBLG8 wird Syiha 1.5 or Speedmod K1-8 Kernel.
Would be fine if there is a fix or at least idea how to solve this
Just so everyone knows, the way i fixed this was very simple.
1. Uninstall Kies and All Drivers
2. Reboot Into Recovery (If Roooted)
3. Wipe Cache and Dalvik
4. Fix Permissions
5. Install LG8 Rom (rom installer from UpdateMe)
6. Reboot Phone
7. Disconnect From Internet (PC/MAC)
8. Re-Install Kies
9. Connect Phone to PC/MAC
10. Let Phone Install Drivers Again with Kies
11. Should Be Good-to-Go
1
-On Control Panel go to Programs and Features find Samsung mobile USB drivers and uninstall it, conect phone on PC via USB cable and wait for drivers to install.
or
2
-Use Kies and klik Troubleshoot problems with connectivity
That should solve the problem
nexusino said:
1
-On Control Panel go to Programs and Features find Samsung mobile USB drivers and uninstall it, conect phone on PC via USB cable and wait for drivers to install.
or
2
-Use Kies and klik Troubleshoot problems with connectivity
That should solve the problem
Click to expand...
Click to collapse
I actually tried that and didnt work for me so i started from scratch as if the PC never connected with the phone before.
nexusino said:
1
-On Control Panel go to Programs and Features find Samsung mobile USB drivers and uninstall it, conect phone on PC via USB cable and wait for drivers to install.
or
2
-Use Kies and klik Troubleshoot problems with connectivity
That should solve the problem
Click to expand...
Click to collapse
this worked for me but i have to repeat the process every time in reconnect my phone to the pc
It works
Hi guys,
I think I figured it out.
I was reading posts about this issue on multiple forums and there was one that caught my attention (I cannot remember where it was exactly- it was late in the night).
The thing is that the current Windows running PC's (or most of them) does not have the latest drivers and updates installed.
First I tried connecting my Galaxy S3 to the PC (which was not updated) and had the same errors you guys have. Then I connected it to my home laptop and this did not work as well. Today when I went into the office (@work) i tried again there and it worked flawlessly. Then it hit me:
The IT dept keeps the laptops and all the infrastructure up to date (including Windows updates). Therefore I tried again at home but this time with Windows up to date and guess what...it worked on both PC and laptop !
What I did (please keep in mind that all of my laptops and PC's are running Windows 7 - not sure if it works on older Windows versions):
1) Uninstall Kies and the related USB driver it installs (Control panel -> Programs and features)
2) Let Windows install the latest updates (Control panel -> Windows Update) and let it reboot your machine and finish installing things.
3) After you're logged back into Windows just plug your USB cable into the phone and PC/Laptop on any of the USB ports and it works !
Hope this helps !
Regards,
Mike
wtf i update kies software, here the same problem. :crying::crying:
i reinstall Kies more then 3x, but the problem is exist!
i try other usb connection, same problem..
now when i connect my Galaxy S2, same prob.
and all that after i update Kies Software to 2.3.
Where can i found an older Version?
Greetings
---------- Post added at 10:34 PM ---------- Previous post was at 10:17 PM ----------
Samsung Composite Driver is exactly the Problem on Windows 7 X64!
I installed these drivers SAMSUNG_USB_Driver_for_Mobile_Phones and this solved my problems with the ID issue. Here is the link https://www.dropbox.com/s/fm9b12xy3r0t07b/SAMSUNG_USB_Driver_for_Mobile_Phones.zip. Good luck guys
i try it with only Windows Update Driver that was not the Solution, that was without ADB Support..
I resolve the Problem, :good: if anyone have the Problem further, try this..
- uninstall all Samsung Driver & Kies from your System
- then you need the tool USBDeview
- uninstall with that tool all unused or Samsung USB Driver from your Sys
- Reboot your Machine
- after that clean your registry (example with CCleaner)
- Reinstall or Update your Motherboard System Driver (Only USB)
- Reboot your Machine
- Install Now Samsung Kies again
- again Reboot your Machine
- and last disable USB Debugging on your Phone and activate it again
now you can plug your Device and hopefully with MTP and ADB Support and without Hardware ID Error.
Best Regards
This happened to me since I updated Kies. What works for me:
Go to settings -> more (under data usage) -> USB Utilities -> connect storage to PC -> OK
Windows now does recognise the phone and you can browse the phone as a drive. Kies will give you an error.
Turn off USB Storage, disconnect the phone.
Take out the USB cable and put it back in and Windows should detect the phone properly now and Kies will recognise it too.
this worked for me first time
Flashed rom, new error of mulfunctional USB and not recognized phone on USB. Interesting is, that another phone, but the same type, same ROM was recognized. Nothing from above helped (reinstalled progs, restarts, reinstalled ROM, tweeking in kies)
Helped only reinstalled drivers posted above by gee2012 (SAMSUNG_USB_Driver_for_Mobile_Phones)! Thanks for this.
gee2012 said:
I installed these drivers SAMSUNG_USB_Driver_for_Mobile_Phones and this solved my problems with the ID issue. Here is the link https://www.dropbox.com/s/fm9b12xy3r0t07b/SAMSUNG_USB_Driver_for_Mobile_Phones.zip. Good luck guys
Click to expand...
Click to collapse
Big thanks, these drivers sorted it out for me though the ones you hosted have gone from your dropbox I found more easy enough because of the name you supplied.
Just out of interest are those having this problem using an AMD chipset or a gigabyte motherboard? My main PC has both and its the only system I am having this issue with.
had this happen again after flashing a new rom from a full wipe. un installed the drivers then reconnected and fixed the issue.
Zrbyte said:
Big thanks, these drivers sorted it out for me though the ones you hosted have gone from your dropbox I found more easy enough because of the name you supplied.
Just out of interest are those having this problem using an AMD chipset or a gigabyte motherboard? My main PC has both and its the only system I am having this issue with.
Click to expand...
Click to collapse
Funnily enough yes, I am using a FX-6100 and a GIGABYTE GA-970-DS3
Dear all,
I am having a problem with getting Odin 3.xx.x (also tried older ones) to work on my clean installed Windows 10 64bit system. For some reason Odin is not recognizing any samsung phone on my system. Before i reinstalled windows it worked without any problems. Windows is recognizing de phones when i check the devices. it showes up as Samsung Mobile USB CDC composite Device and as a Samsung Mobile USB Modem. (Also showing up in COM ports when i show hidden devices)
What i have tried so far:
install/reinstall/uninstall Samsung USB Drivers
Different versions of Odin
Different Phones
Installed Kies
Latest (USB, Chipset) updates on my HP system.
Different USB Ports (2.0 and 3.0)
different cables
The strange thing is when i connect the phone(in download mode) and start Odin the added message appears. Flashing is not working. (Tried with a working twrp on a SM-G355HN, tested it with another PC that has a working Odin)
When i disconnect the phone Odin shows the "Removed" message. When i reconnect the phone, the "added" message is not showing. But when i disconnect is does show the "Removed" message.
My friend has the exact same HP Zbook with Windows 10 and does not have any problems at all.
I tried running it on another system (HP Workstation Z640) and i got the exact same problems. Also running Windows 10 64bit.
Is it possible that Odin needs specific software to work like a Visual C++ or .Net version?(just guessing here)
I really hope there is someone that can help me with this. Its driving me crazy.
Thanks in advance!
There is a particular type of Samsung drivers that works fine across all systems I think it's the version 15.4 download it and try.
Thank me later
Sent from my SM-N950F using Tapatalk
Tali099 said:
There is a particular type of Samsung drivers that works fine across all systems I think it's the version 15.4 download it and try.
Thank me later
Sent from my SM-N950F using Tapatalk
Click to expand...
Click to collapse
Thanks for your quick reply!
I installed SAMSUNG_USB_Driver_for_Mobile_Phones_ver_1.5.65.0 and e few others. None of them did the trick. Is it possible that you ment 1.5.4? (Did not find it yet)
I tried 3 systems with windows 10 64 bit. unfortunately none of them are not working. No one else got the same issues? Or better, solved the issue?