Related
i tried to flash 2.2 using odin but i cant select reboot or any other command on the list.. what do i do? or is my phone done?
Lavundra21 said:
i tried to flash 2.2 using odin but i cant select reboot or any other command on the list.. what do i do? or is my phone done?
Click to expand...
Click to collapse
No sir, you should be just fine, try to reflash back to stock using odin, pull the battery remove the sim and sd card, and then go into downloader mode, and try again.
stock FW here, good luck.
Lavundra21 said:
i tried to flash 2.2 using odin but i cant select reboot or any other command on the list.. what do i do? or is my phone done?
Click to expand...
Click to collapse
Read the froyo thread you need to adb reboot
Sent from my SGH-T959 using XDA App
still cant get it to work... i dunno what im doing wrong. but it seems like all the files needed arent in the link from above.
Keep trying
Try enter "downloading mode" with the sd card in the phone(after many attempts it worked for me), there is a thread in this forum about how to enter "downloading mode" and flash the phone.
still cant get out of the android system recovery mode.. ive tried holding buttons down while turning the phone on and off and theres nothng happening. still cant use the power button as the ok.
i got the same problem i cant use any button as ok
is there a way to get the ok button, or what i can do to get over this problem
thanks in advance
Let me know if these steps help:
Here is a couple of methods to get into download mode. Once you get to
download mode, follow the directions in second part of my post...
First Method
1) Pull the battery, sim card, and sd card.
2) Reinsert battery but do not press any buttons.
3) Plug into usb that is connected to your computer. If something shows up
on the screen (charging logo) then you should be golden.
4) Hold the vol up, vol down, and power until the screen comes on,
immediately release the power button but not the other two. Hopefully it
will boot into download mode and than you can use Odin to get back to stock.
Second Method
1) Another method that seems to work for some people is to pull the battery,
sim, sd card.
2) Reinsert battery and hold both volume buttons but do not press power
button.
3) Then plug in usb. The phone should boot into download.
Third Method
1) You will need the samsung ADB drivers installed for your phone and ADB.
Samsung Drivers for 32 bit Windows: http://files.androidspin.com/downlo...=SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
Samsung Drivers for 64 bit Windows: http://files.androidspin.com/downlo...ung/vibrant/&file=usb_drivers_GalaxyS_x64.zip
2) Remove sim card and sd-card. Remove the battery.
3) Hold buttons vol up, vol down, and power.
4) While holding down those 3 buttons put the battery back in and keep
holding all 3 buttons until the vibrant disappears and reappears. Once it
reappears, release all 3 buttons.
5) Now connect your phone to your pc via USB cable.
6) Open a cmd prompt and navigate to the folder with ADB and type "ADB
REBOOT DOWNLOAD" caps are not necessary.
7) Your phone will reboot into the download
How to get back to stock once in Download Mode:
Download the files in the linked thread and follow the directions there or
the ones in my post below.
Odin and Files Needed Available Here: http://forum.xda-developers.com/showthread.php?t=734475
1) Open Odin and verify that one of the Com ports shows a device connected.
If it doesn't try using a different usb port.
2) Load the .pit and pda files. It should be pretty obvious how to do that
once you are in Odin.
3) Make sure that the option to partition is unchecked. The other two
options should be checked.
4) Hit start and wait.
5) Your phone will restart when Odin is done and you will be good to go.
Seems to be the same issue
I just tried upgrading to 2.2 using Odin and this seems to be the same problem. It seems that every solution starts with, "Enter Into Download Mode..." but no method seems to work.
I wouldn't say the phone is "bricked" as when it is plugged into a computer it will install the drivers and Odin sees it, but I can't get it into anything but recovery mode.
The buttons seem to be strangely mapped, the up and down buttons are reversed and the power button doesn't seem to be working as the "Ok" button. The menu toggles the recovery screen and the <!> graphic with the Android. Anyone figured out how to solve this? In the meantime I will continue attempting to get into download moad.
Hi, I have the same exact problem. Stuck in system recovery. Volume buttons reversed. Power button does nothing. Cannot get into download mode. Please Help
what happened?
I just got the same issue :S
the volumes buttons are wrong and the power (OK) button is not working on system recovery mode...
any help?
same problem - samsung galaxy vibrant
brianking21 said:
Hi, I have the same exact problem. Stuck in system recovery. Volume buttons reversed. Power button does nothing. Cannot get into download mode. Please Help
Click to expand...
Click to collapse
can't mount /dev/block/mmcblk0p1
(invalid argument)
e:copya_dbdata_media:can't mount SDCARD:
your storage not prepared yet, please use UI menu for format and reboot actions
copy default media content failed
Folks, any update regarding this problem. I got very same problem, and could not find a solution yet.
hints?
I have the same problem also. I got into the problem by following a thread down grading to 2e version from 3e version. I've tried lots of things including going back to stock--or what I think is stock. I now have the 3e version again but when I bring up recovery mode the up/down buttons are backwards and the ok (power) key doesn't work.
Suggestions? HELP?
We can get into root console and manually tweak files if that will help.
UPDATE----SOLUTION
I got this working by reloading the stock t-mobile kernel from http androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/. This link provided at that site is single file so just use the pda and pit boxes in odin. In desperation I selected re-partion and Phone bootloader update.
I was unable to get into the recovery console with hitting any keys but adb did the trick. Volumn-up and power gets into the flash download
Finally Fixed it
I finally was able to get the phone into download mode by holding down the volume up key, the search key and the power key.
It seems the key mapping was just messed up.
After it entered download mode I followed the guide on androidspin /2010/08/09/ how-to-restore-or-recover-your-samsung-vibrant (add the .com to androidspin, forum won't let me post links yet)
Hi How did you hold the search key. It does not light up till the vibrant shows on screen. Can you please explain how to managed to hold vol up, power and search together? thanks
Sivaavis its only a 3-button combo, not 4. Why u holding down search? Its up,down volume and power and then when the vibrant logo shows u let go of power.
Sent from my SGH-T959 using XDA Premium App
If you are in recovery mode just go into adb and type in:
adb reboot download
You should be in download mode
So I've finally decided to root my S3 and run CM9, as from what I hear it's very stable now. Only problem is, I seem to have fallen at the first hurdle!
I've been following the SGS3 full update guide on the cyanogenmod wiki.
I powered off the handset, booted into download mode, opened zadig.exe in the drivers folder of the heimdall suite, selected options>list all devices, selected "Gadget Serial", clicked "Replace Driver". A message popped up saying it was successful. The guide simply says to power off the device and reboot into download mode again. However, after this I could not power off the device. The power button wasn't working and I got no response from pressing any of the buttons on the device. Eventually I decided to open it up and remove the battery and then try to boot into download mode again.
Now, it doesn't boot into download mode at all. Every time I hold the volume down and home buttons, I then connect the micro USB and nothing happens at all - it just begins charging. The phone can boot normally and appears to be functional apart from this, but this is stopping me from being able to root. Anyone know what could be the problem?
Thanks!!
Just tried factory reset and still no dice.
Has anyone come up against this before?
And, just to be sure, you are holding down the power button when you press volume down & home on a powered off GS III, right? Since you say you're rooted, you can boot into download mode from the phone itself:
Grab https://play.google.com/store/apps/details?id=jackpal.androidterm&hl=en
Run su reboot download
Yup, I was. Seems that after enabling USB debugging after factory reset, the problem has resolved itself. Thanks for your help anyway
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
ergotelis said:
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
Click to expand...
Click to collapse
You'll probably need to flash a new recovery partition. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1950307
RaiderDuck said:
You'll probably need to flash a new recovery partition. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1950307
Click to expand...
Click to collapse
Thanks, but the problem is that this guy can get into the recovery with powering up+holding volume down button, if i understood well.but I can't!
ergotelis said:
Thanks, but the problem is that this guy can get into the recovery with powering up+holding volume down button, if i understood well.but I can't!
Click to expand...
Click to collapse
flasing a recovery is done via fastboot so you don't have to enter recovery but fastboot (hold power and volume down till it shows fastboot, then press up) .
look at this post: http://forum.xda-developers.com/showpost.php?p=33137046&postcount=10
Fix
ergotelis said:
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
Click to expand...
Click to collapse
hello i had this problem yesterday, it happens in neutrino rom to alot of people!
and btw i could not open recovery either
ill explain what i had to do
i had to use moto-fastboot and install a new recovery, basically your recovery is dead and your rom is unbootable
heres the steps
download the moto drivers and install
http://forum.xda-developers.com/attachment.php?attachmentid=1381183&d=1349549067
then download the motofastboot zip http://forum.xda-developers.com/attachment.php?attachmentid=1381414&d=1349555102
and create a new folder in C: (computer) called Android and then drag the files from the moto zip into android
Then download a new recovery http://www.mediafire.com/?6ww8wrjrdqq9m97
place the recovery.img into the android folder
now you have all the files needed to reflash your new recovery and fix your phone the whole idea is to reinstall recovery so you can access it and wipe and install the rom fresh again
now you need to do these steps
1) Attach your phone to the PC via USB (use a port closest to the power supply)
2) Reboot phone while holding volume down until you see "fastboot"
3) Press volume up to initiate fastboot
4) On your PC click the Start menu, then in the search box type "cmd"
5) In the command prompt type the following commands (no quotes, hit enter after each command)
6a) "cd c:/android"
6b) "moto-fastboot devices"
your CMD promt should show something like this
C:\Users\Me>cd c:/android
c:\Android>fastboot devices
TA20703SX9 fastboot
c:\Android>
now if that has all worked type the following phrases
moto-fastboot erase recovery
moto-fastboot flash recovery recovery-clockwork-6.0.1.4-maguro.img
moto-fastboot reboot
now the phone should reboot, unplug the usb and pull battery out.
put battery back in and then try to boot into recovery like you normally would (power button + Vol Down)
and your new recovery should load!
from here you can wipe your whole system which i would reccomended as your current one is corrupt and install a new rom or reflash your current on onto a clean wipe. if you dont understand how to clean wipe do all of these steps, factory reset, clear cache, clean dalvik cache then go to mounts > storage and format data + format cache + format system
now install new rom and let it boot up, should bootloop a couple of times then start! if not unplug battery from phone and ask for further assitance
Pixelguy said:
1) Attach your phone to the PC via USB (use a port closest to the power supply)
2) Reboot phone while holding volume down until you see "fastboot"
3) Press volume up to initiate fastboot
Click to expand...
Click to collapse
Thank you for your help, the problem is exactly here, i put on the usb, i power up the phone by pressing the volume down, and the phone does nothing,doesn't show the fastboot,and after 10-15 secs starts rebooting again. This is my problem!
The only response from my phone is when powering up, and pressing the volume up, it says "starting rsd protocol support"
Is there any case that my volume down is dead?
ergotelis said:
Thank you for your help, the problem is exactly here, i put on the usb, i power up the phone by pressing the volume down, and the phone does nothing,doesn't show the fastboot,and after 10-15 secs starts rebooting again. This is my problem!
The only response from my phone is when powering up, and pressing the volume up, it says "starting rsd protocol support"
Is there any case that my volume down is dead?
Click to expand...
Click to collapse
unplug usb
remove battery, then put battery back in make sure phone off (no green light)
then hold power button and vol down at the same time for a few seconds
Fastboot should appear in white writing then press up volume and it should say starting rsd protocal or something similiar
then plug in usb and follow the steps i have written above
i do exactly what you said, but doesn't show fastboot. from switched off, if i press volume up with power button, i see the message "starting rsd protocol support" .but no fastboot option!
Is there any chance that you can access adb after bootscreen? than you can use "adb reboot recovery" to get there...
jorno88 said:
Is there any chance that you can access adb after bootscreen? than you can use "adb reboot recovery" to get there...
Click to expand...
Click to collapse
When i start up phone, the only combination possible to stop restarting is by pressing power+vol up to show that with RSD. There is no other option then selectable. Power + volume down does not work, doesn't show anything, has anyone of you experienced this thing?
If the only working option you have is RSD, then I'm afraid you're stuck with having to flash a stock SBF. I hope you know/remember exactly what stock version you had installed before any modding or flashing, because the SBF has to match exactly. Choose wisely and read up as much as you can before flashing.
I have over a year now with custom roms, and i can't remember which version i had. Why do i have to find exactly the version that i had? The latest stock version won't work with rsd? It will make it hard brick?If i manage at least to recover the fastboot menus etc it would be great!
I will later also try to open it, to see if the side button "volume down" is not working,.
I have another question, in your moto atrix, if you press on startup power+vol up, are you also seeing the "starting RSD" etc option??
ergotelis said:
I have over a year now with custom roms, and i can't remember which version i had. Why do i have to find exactly the version that i had? The latest stock version won't work with rsd? It will make it hard brick?If i manage at least to recover the fastboot menus etc it would be great!
Click to expand...
Click to collapse
Yes, flashing a wrong SBF will most likely hardbrick your device.
ergotelis said:
I have another question, in your moto atrix, if you press on startup power+vol up, are you also seeing the "starting RSD" etc option??
Click to expand...
Click to collapse
Can't try right now, but as far as I know, yes, that is a standard way to enter RSD mode.
thank you, so, i know that at least my phone responds to some instructions.
Is there anyone else to suggest me to do anything else?
IN rsd mode, (other than flashing a stock random rom with chance of hardbricking,)the phone can be read by usb, can i do anything there?
ergotelis said:
IN rsd mode, (other than flashing a stock random rom with chance of hardbricking,)the phone can be read by usb, can i do anything there?
Click to expand...
Click to collapse
Sadly no. The RSD mode can only ever be used to flash SBFs. That's it. Nothing less, nothing more.
I will now try to open it to see if vol down is not working well. If it does work, i will select a stock rom 1 year old and i will flash it using rsd, and whatever happens....:good:
I disassembled the phone, the button seems to operate fine(?).
I flashed with RSDlite the 2.3.6 version, the RSD stuck to waiting for phone to restart.
The phone restarted, the "unlocked" logo disappeared.
Starts normally, passes the red motorola logo, shows the graphic of AT&T, and after ~10sec starts restarting again. Bootloop again!
At boot, pressing power+vol up, i can still get the RSD support. Pressing power+vol down does nothing, I don't see any error messages, like the ones in hard brick.
What can i do now, any ideas please!!!
try this
ergotelis said:
I disassembled the phone, the button seems to operate fine(?).
I flashed with RSDlite the 2.3.6 version, the RSD stuck to waiting for phone to restart.
The phone restarted, the "unlocked" logo disappeared.
Starts normally, passes the red motorola logo, shows the graphic of AT&T, and after ~10sec starts restarting again. Bootloop again!
At boot, pressing power+vol up, i can still get the RSD support. Pressing power+vol down does nothing, I don't see any error messages, like the ones in hard brick.
What can i do now, any ideas please!!!
Click to expand...
Click to collapse
Yesterday I had a hard time getting my phone into fastboot mode, after loading a bad SV kernel,it only wanted to start the RSD protocol mode. I eventually got into fastboot by plugging into the wall charger, then removing and installing the battery while holding the vol button. When fastboot appears, unplug the charger to allow sd access.
Thanks for the suggestion, i tried even this,it didn't work. The funny thing is that it shows the battery charging level full screen if i connect the charger, as it starts.
I noticed also that when i press vol down now, it takes longer to start and continue to the moving red logo, it stays for a while stable red,feels like it is thinking whether to start or not lol (if i don't press vol down, on the power up the red moto logo immediately starts the classic "waving" effects)
Anyone having any kind of suggestion?I guess you don't, right?
I have a fairly generic Chinese tablet, a Neutab N7 (not a Nexus 7), but I have no idea how to enter the bootloader/fastboot mode.
Using adb, "adb reboot bootloader" or "adb reboot-bootloader" just makes it reboot normally.
From a shell, doing "su reboot bootloader" also reboots normally.
I tried Quick Boot from Google Play which has an option to reboot into the bootloader, but it also just ends up rebooting normally.
While powered off, I tried holding power and volume up, power and volume down, and power and both volume up and down, but they all just boot normally.
Doing "adb reboot recovery" does boot me into recovery mode, but the menu doesn't have a bootloader/fastboot option.
Does anyone have any idea how to enter the bootloader/fastboot mode for this tablet? Any help would be appreciated.
knismaps said:
I have a fairly generic Chinese tablet, a Neutab N7 (not a Nexus 7), but I have no idea how to enter the bootloader/fastboot mode.
Using adb, "adb reboot bootloader" or "adb reboot-bootloader" just makes it reboot normally.
From a shell, doing "su reboot bootloader" also reboots normally.
I tried Quick Boot from Google Play which has an option to reboot into the bootloader, but it also just ends up rebooting normally.
While powered off, I tried holding power and volume up, power and volume down, and power and both volume up and down, but they all just boot normally.
Doing "adb reboot recovery" does boot me into recovery mode, but the menu doesn't have a bootloader/fastboot option.
Does anyone have any idea how to enter the bootloader/fastboot mode for this tablet? Any help would be appreciated.
Click to expand...
Click to collapse
why do you want to enter the bootloader? and have they made any roms or cwm recovery for these types of generic android tablets?
[RESOLVED] finally, ROOT for Neutab N7 pro tablet.
knismaps said:
I have a fairly generic Chinese tablet, a Neutab N7 (not a Nexus 7), but I have no idea how to enter the bootloader/fastboot mode.
Using adb, "adb reboot bootloader" or "adb reboot-bootloader" just makes it reboot normally.
From a shell, doing "su reboot bootloader" also reboots normally.
I tried Quick Boot from Google Play which has an option to reboot into the bootloader, but it also just ends up rebooting normally.
While powered off, I tried holding power and volume up, power and volume down, and power and both volume up and down, but they all just boot normally.
Doing "adb reboot recovery" does boot me into recovery mode, but the menu doesn't have a bootloader/fastboot option.
Does anyone have any idea how to enter the bootloader/fastboot mode for this tablet? Any help would be appreciated.
Click to expand...
Click to collapse
Having been looking for this information myself i'm sharing real quick here what i've found. Scouring the net all over i've found NOTHING specific for these Chinese tablets but after finally getting on the scent of VROOT I downloaded and tried iROOT essentially a one-click rooter the .APK **DID NOT WORK** but the PC version **DID** can be found by googling iroot or vroot.
RE: bootloader, i've still found no way or any good info on entering the bootloader AFAIK this is locked and may not be possible without some good hard hacking on the firmware, I DO KNOW that if you try entering the "bootloader" with a reboot manager on the device u will find yourself at the "NeuTab" welcome screen and stuck. Fortunately at least in my experience, letting the tablet battery run down low you can boot back into it and root condition is still good.
Hope this helps somewhat I know its an old post but a lot of people have been looking for this info have yet to post on authors site confirming that the NeuTab also works with his software.
peace.
VE3UND
BTW I forgot to mention the site and the software (ALTHOUGH IT STATES OTHERWISE) is in Chinese. A leap of faith needed there I know but i confirm this method works. l8z
BTW^2 ALSO the android version was KitKat as received from the mfg, also have been told that Jellybean will install on the tablet after rooting and maybe is now included with device but don't quote me on that.
all in all a really nice tab for the price, especially now we have root biggest missing option: GPS but you can tether to another device with gps if you need to. Also no built in USB HOST MODE. //out
I've got the NeuTab N10 and can't get ADB to see it at all. How did you get ADB to work with your N7, were you able to find NeuTab ADB drivers somewhere?
So i recently came across this tablet in my stuff... something i picked up for the wife a few years back.
I also came across this website.... http://neutab.com/info-detail.php?InfoId=11
It has all the tools and programs that the company uses. includes all files for development of their entire line of tablets.
Thought this may be useful. just click on the link that says pheonixtools.zip and it will take you to a back end file server... This tablet is about as open sourced as it gets... so... this leads me to ask a question i have been struggling with for the last 2 years of being a member on this website...
can anyone... please... help me develop my first recovery and custom rom for this tablet? I just have never done it all the way... i have set up a couple things here and there... figured out how to strip the stock recovery and boot... but never got further than that.
Thanks for the help.
• Unzip phoenix tool.zip you just downloaded; (to open a .zip file, download WinRAR)
• In the folder of phoenix tool you just unzipped, depending on your system specs, select "drvinstaller_X64", "drvinstaller_x86" or "drvinstaller_IA64" to install tablet driver; Or you can run all three driver installer and at least one will work;
• Run "PhoenixSuit.exe", select "firmware" tab;
• Click on "Image" button, choose the firmware you just downloaded;
• Turn your tablet completely off (by press and hold power button for 20 seconds), press and hold "volume -" button, connect tablet to computer via usb cable, keep volume button held, press power button 10 times repeatedly；
• The phoenix tool should recognize the tablet. On pop-up dialog window, select if you want to format and wipe out everything on your tablet；
• The phoenix tool will start flash the firmware to the tablet. Wait till it is done；
• When upgrade is finished, disconnect your tablet from computer, press and hold power button for 10 seconds to quit upgrade mode. then press and hold power button for 2-4 seconds to turn tablet on；
Congratulations! Your tablet is now refreshed.
Ok so I have a NueTab Air 7 Android and I have talked toto their customer support which did neurologist absolutely no good. I have been trying to hard reset my tablet and do a factory reset by holding down the volume up and down keys and the power keys until it gives me the option of rebooting. However, there is no option for a factory reset. Only a Recovery mode, Fastboot mode, and Normal mode. I tired the Normal and Recovery an both sent me back to enter password that I can't rremember, which isthe why I'm resetting it lol. Finally I chose the Fastboot option and now it is stuck on that option and has been for almost an hour. It willwas not let me power off, try to hard reset, it is literally stuck. And it is a hundred percent charged. I do jot hav the optiontime to connectbe the tablet to acall Windows computer at this timetime, as the forums I have read say can possibly fix the issue. And what a surprise the customer service phone number for this specific tablet does not know how to fix it!!!!! Not surprised at all. If anyone at allthe has any ideas or knows what to do or howsomething to fix it please help meme. I'm very frustrated to say thethat least and in desperate need of help. Anything would be immensely appreciated. ~Melissa
How to identify the exact firmware of the N7 after this page (Oficial NEUTAB), I have 3 options but that IMEI series is nowhere in the table.
---------- Post added at 11:35 PM ---------- Previous post was at 11:35 PM ----------
this page http://neutab.com/info-detail.php?InfoId=11
n7s root
therealtaynak said:
So i recently came across this tablet in my stuff... something i picked up for the wife a few years back.
I also came across this website.... http://neutab.com/info-detail.php?InfoId=11
It has all the tools and programs that the company uses. includes all files for development of their entire line of tablets.
Thought this may be useful. just click on the link that says pheonixtools.zip and it will take you to a back end file server... This tablet is about as open sourced as it gets... so... this leads me to ask a question i have been struggling with for the last 2 years of being a member on this website...
can anyone... please... help me develop my first recovery and custom rom for this tablet? I just have never done it all the way... i have set up a couple things here and there... figured out how to strip the stock recovery and boot... but never got further than that.
Thanks for the help.
Click to expand...
Click to collapse
I would love to root this tablet purely because it's my daughter's and some of the games she likes has some real funky permissions That they want! A custom rom would be nice but I will be satisfied with being able to revoke some of the permissions that the apps want to have access to.
n7s software download issue
therealtaynak said:
• Unzip phoenix tool.zip you just downloaded; (to open a .zip file, download WinRAR)
• In the folder of phoenix tool you just unzipped, depending on your system specs, select "drvinstaller_X64", "drvinstaller_x86" or "drvinstaller_IA64" to install tablet driver; Or you can run all three driver installer and at least one will work;
• Run "PhoenixSuit.exe", select "firmware" tab;
• Click on "Image" button, choose the firmware you just downloaded;
• Turn your tablet completely off (by press and hold power button for 20 seconds), press and hold "volume -" button, connect tablet to computer via usb cable, keep volume button held, press power button 10 times repeatedly；
• The phoenix tool should recognize the tablet. On pop-up dialog window, select if you want to format and wipe out everything on your tablet；
• The phoenix tool will start flash the firmware to the tablet. Wait till it is done；
• When upgrade is finished, disconnect your tablet from computer, press and hold power button for 10 seconds to quit upgrade mode. then press and hold power button for 2-4 seconds to turn tablet on；
Congratulations! Your tablet is now refreshed.
Click to expand...
Click to collapse
I have yet to be able to download the zip or the firmware software. i got root with kingo pc version but that's pretty much it and I can't change the route manager because once I delete that then I don't have root anymore and can't add another one. Also I have yet to been able to get into or see download mode on this either. It just stays on the screen with the name on it and that's pretty much it. no bootloader unlock either
So i was using RessurectionRemix (a version from last month) and recovery twrp 3.1.0-0 and the phone was working great!
Yesterday i left my phone charging over night and in the morning i wake up to my phone bootlooping!
So i tried different things including everything it says here https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949 without luck
I can get it into recovery and fastboot but as soon as i let the key combination go the phone stops and just shows a black screen (screen is on) and i cant get into qualcomm recovery to flash!
And the only way to shut off the phone is by holding power + vol up + vol down!
Any solution or suggestions?
Use flashone method to unbrick
md07 said:
Use flashone method to unbrick
Click to expand...
Click to collapse
As i already mentioned i cant get into qualcomm recovery so i cant use flashone
try to flash fastboot rom from cucoco's.
Tsoler said:
As i already mentioned i cant get into qualcomm recovery so i cant use flashone
Click to expand...
Click to collapse
connect phone to computer, try force shutdown phone by hard button, ater phone shutdown, immediately release power but keep both volume. Phone maybe will enter Qualcomm flash dead mode, and Flashone will regconize com phone (refresh nedded)
Hope you success ! And believe, if a phone can flash with Qfil or Flashone, almost that phone never die (software)
Are you able to connect to the phone via Vysor, either via Chrome browser or as a standalone app on Windows PC when you do not see anything on the phone screen? Please post if Vysor install goes thru successfully. Hope your developer options/USB debugging are on. I assume your phone boots but may have display issues either hw or sw.
md07 said:
connect phone to computer, try force shutdown phone by hard button, ater phone shutdown, immediately release power but keep both volume. Phone maybe will enter Qualcomm flash dead mode, and Flashone will regconize com phone (refresh nedded)
Hope you success ! And believe, if a phone can flash with Qfil or Flashone, almost that phone never die (software)
Click to expand...
Click to collapse
Did what you said but nothing happens
kayyappan said:
Are you able to connect to the phone via Vysor, either via Chrome browser or as a standalone app on Windows PC when the you do not see anything on the phone screen? Please post if Vysor install goes thru successfully. Hope your developer options/USB debugging are on. I assume your phone boots but may have display issues either hw or sw.
Click to expand...
Click to collapse
Phone gets recognized but not long enough to do anything (windows makes sound but doesn't install anything and doesn't show up in device manager)
try this guide
https://www.gizmochina.com/2016/11/20/leeco-x820-max-2-super-unbrick-guide/
You have mentioned that you are able to see the device in recovery and fastboot till you release the buttons - does this mean if the buttons are held say in fastboot mode you are able to see the device via "fastboot devices" or in recovery the twrp screen or nothing ever shows up at all? Are the buttons clicking properly? Check individually to make sure - particularly the power button. Does it vibrate at any point of time when you press and hold the power button? Are you able to see any backlight when you say the screen is on?
If there no backlight shine a torch or sunlight from the side of the screen to see anything at all on the screen.
Vysor reports apk not installed when it attempts to download from PC to phone but fails. With Vysor you will have two windows one showing status of phone - this is the main window. The other is the mirrored one - that of the phone when you click view on the main window. I forgot that the phone requires approval to install the apk. Please see the attached thumbnails. Keep touching the screen about 3 cms up from the bottom of the screen (not the phone) to see any change. Hope your touch works.
I know it is quite frustrating to try a number of things. I recently went thru the same on Galaxy S4 to make sure the phone but for the screen works OK prior to ordering the screen. Besides in my case developer options was disabled and touch also did not work. It took about a week of learning and trying to see something on Vysor. I never have used a Sam phone till that time this broken phone was handed over to me.
After a lot of trying i found out that when i keep pressed power + vol down or vol up while connected to pc and device is off it gets recognized as
qualcomm hs-usb qdloader 9008 long as i keep the keys pressed so i tried the flashone method but it just says could not connect
Are Qualcomm drivers loaded on your computer? I have not used flashone. I used QPST to see if phone is connected. I am not sure if they are same.
kayyappan said:
You have mentioned that you are able to see the device in recovery and fastboot till you release the buttons - does this mean if the buttons are held say in fastboot mode you are able to see the device via "fastboot devices" or in recovery the twrp screen or nothing ever shows up at all? Are the buttons clicking properly? Check individually to make sure - particularly the power button. Does it vibrate at any point of time when you press and hold the power button? Are you able to see any backlight when you say the screen is on?
If there no backlight shine a torch or sunlight from the side of the screen to see anything at all on the screen.
Vysor reports apk not installed when it attempts to download from PC to phone but fails. With Vysor you will have two windows one showing status of phone - this is the main window. The other is the mirrored one - that of the phone when you click view on the main window. I forgot that the phone requires approval to install the apk. Please see the attached thumbnails. Keep touching the screen about 3 cms up from the bottom of the screen (not the phone) to see any change. Hope your touch works.
I know it is quite frustrating to try a number of things. I recently went thru the same on Galaxy S4 to make sure the phone but for the screen works OK prior to ordering the screen. Besides in my case developer options was disabled and touch also did not work. It took about a week of learning and trying to see something on Vysor. I never have used a Sam phone till that time this broken phone was handed over to me.
Click to expand...
Click to collapse
It doesn't stay long enough in recovery or fastboot to do anything it shuts off after a few seconds even with the buttons pressed after that it just shows a black screen
Phone vibrates when i press power and shows leeco logo (not os logo) and after 1-2 seconds screen goes black and phone vibrates again and shows leeco logo again and just continues looping
if i try to press power + vol up normally it goes into recovery but as soon as recovery is loaded screen goes black (screen on just doesn't show anything) the same goes for fastboot if i press power + vol down it loads fastboot but after 1-2 seconds screen goes black
if i keep pressing keys the phone just stays longer in recovery/fastboot but only 4-5 seconds
I assume you have adb and fastboot. Since you say the screen remains on when booting to recovery open a command prompt at the directory where adb is and issue a command "adb devices" without quotes. Does it just exit without showing any device or throws up some error? Try this irrespective of the black screen.
Have you looked at and tried what is given by @HTC-TYTN2 at post #8? It is for Le Max 2 and you will find a link to Quallcomm drivers too. Do not bother that the link mentions X820 even your Max 2 is 821, 829, etc.
since it happened after charging, you might want to check your cable and battery. best is to get a cheap usb multimeter.
Gesendet von meinem LEX820 mit Tapatalk
I too thought it could be the battery based on that's the screen goes off. But he also mentioned that the screen remains on but nothing to be seen after a short while. Wanted to suggest slow speed charging probably via a laptop usb as I'm not sure if he used high speed charging resulting in battery issue.
Did you solve the problem?
My phone just died completely! No response at all anymore. I'm contacting the seller now to send the phone back.
Looks like it is a hardware defect! A pretty odd one but nothing i can do anymore. I send it back and post what the problem is as soon as get any information.
Thanks to everyone who tried to help!
Tsoler said:
My phone just died completely! No response at all anymore. I'm contacting the seller now to send the phone back.
Looks like it is a hardware defect! A pretty odd one but nothing i can do anymore. I send it back and post what the problem is as soon as get any information.
Thanks to everyone who tried to help!
Click to expand...
Click to collapse
Try this:
https://www.androidfilehost.com/?w=files&flid=136823
download file, unzip, open folder, connect phone to USB via fastboot ( phone off phone + hold volume -) . Click to the flash app in your PC. The app should find the phone. Confirm TWRP problem -NO and start flash.
Drivers must be installed.
Drivers here.
https://uloz.to/!A6B4AmEVx87S/adbdriverinstaller-exe
I can, pass the cuoco rom by qfil? Another type of flash, because I can not access recovery and twrp ?, only by fastboot
RaphaBraga23 said:
I can, pass the cuoco rom by qfil? Another type of flash, because I can not access recovery and twrp , only by fastboot
Click to expand...
Click to collapse
Try this via fastboot mode.:
https://www.androidfilehost.com/?w=files&flid=136823
download file, unzip, open folder, connect phone to USB via fastboot ( phone off phone + hold volume -) . Click to the flash app in your PC. The app should find the phone. Confirm TWRP problem -NO and start flash.
Drivers must be installed.
Drivers here.
https://uloz.to/!A6B4AmEVx87S/adbdriverinstaller-exe