err .. since its related to xperia ray I thought of dropping it here .. I'm kinda new here .. sorry if this isn't right but wanted help
Guys , I was on Jelly Sandwich with sirikay's kernel. I had some speed problems with wifi. So I thought of flashing stock ICS Rom ST18i_4.1.B.0.587_Kernel.ftf using uniflash.exe and did it. After flashing it didnt restart. So I clicked the power button to restart manually but just got a vibration sound and nothing else .. just the blank screen. So I searched for stuff about unbricking my device since I thought it's bricked. I downloaded this package "FlashTool_0.2.9.1_FOTAUnbrick.exe" and started flashing the firmwares. So I held down my volumedown button and connected it to the usb port. It says error and that I have to select usb debugging mode and connect again but I can't even start my mobile.
Plz help .. Thanks in Advance
ravi4theja said:
err .. since its related to xperia ray I thought of dropping it here .. I'm kinda new here .. sorry if this isn't right but wanted help
Guys , I was on Jelly Sandwich with sirikay's kernel. I had some speed problems with wifi. So I thought of flashing stock ICS Rom ST18i_4.1.B.0.587_Kernel.ftf using uniflash.exe and did it. After flashing it didnt restart. So I clicked the power button to restart manually but just got a vibration sound and nothing else .. just the blank screen. So I searched for stuff about unbricking my device since I thought it's bricked. I downloaded this package "FlashTool_0.2.9.1_FOTAUnbrick.exe" and started flashing the firmwares. So I held down my volumedown button and connected it to the usb port. It says error and that I have to select usb debugging mode and connect again but I can't even start my mobile.
Plz help .. Thanks in Advance
Click to expand...
Click to collapse
Can you get into Fastboot? Hold volume UP and plug in usb to pc, if a blue led appears on you ray fastboot works. Then you can flash a new kernel with fastboot and a new rom.
ravi4theja said:
err .. since its related to xperia ray I thought of dropping it here .. I'm kinda new here .. sorry if this isn't right but wanted help
Guys , I was on Jelly Sandwich with sirikay's kernel. I had some speed problems with wifi. So I thought of flashing stock ICS Rom ST18i_4.1.B.0.587_Kernel.ftf using uniflash.exe and did it. After flashing it didnt restart. So I clicked the power button to restart manually but just got a vibration sound and nothing else .. just the blank screen. So I searched for stuff about unbricking my device since I thought it's bricked. I downloaded this package "FlashTool_0.2.9.1_FOTAUnbrick.exe" and started flashing the firmwares. So I held down my volumedown button and connected it to the usb port. It says error and that I have to select usb debugging mode and connect again but I can't even start my mobile.
Plz help .. Thanks in Advance
Click to expand...
Click to collapse
What about SEUS (or PC Companion), have you tried them? You have original kernel, it could work.
Definitely try what thomas1991_12 wrote.
thomas1991_12 said:
Can you get into Fastboot? Hold volume UP and plug in usb to pc, if a blue led appears on you ray fastboot works. Then you can flash a new kernel with fastboot and a new rom.
Click to expand...
Click to collapse
Very much thank you thomas for giving me the hope because the blue led thing worked. But I dont know what to do after that. Can you please guide me a bit . Thanks again
ravi4theja said:
Very much thank you thomas for giving me the hope because the blue led thing worked. But I dont know what to do after that. Can you please guide me a bit . Thanks again
Click to expand...
Click to collapse
Yes youll need fastboot.exe (ideally you want to download the android sdk). I included fastboot.exe in the attachement.
Copy fastboot.exe to your C:\ drive for example, so it looks like C:\fastboot.exe
You then need to open a command prompt (Start -> type CMD).
Type: CD C:/
Now type: fastboot devices
It should then show a questionmark or something. Go ahead and download a kernel (i assume you know what i mean). Then flash it using this command: fastboot flash boot KERNELNAME.img (where KERNELNAME.img is the name of the kernel)
If you want, you can download a rom, open it with winrar or something and extract the Boot.img (this is the kernel), the command would then be: fastboot flash boot boot.img
Then type: fastboot reboot
You should then be able to reboot into recovery (press volume down a couple of times on reboot). There you can flash a rom.
Or you can try Flashtool, if you dont know how to work with command-line. It is easier
youtube.com/watch?v=uMq68odJmHA
thomas1991_12 said:
Yes youll need fastboot.exe (ideally you want to download the android sdk). I included fastboot.exe in the attachement.
Copy fastboot.exe to your C:\ drive for example, so it looks like C:\fastboot.exe
You then need to open a command prompt (Start -> type CMD).
Type: CD C:/
Now type: fastboot devices
It should then show a questionmark or something. Go ahead and download a kernel (i assume you know what i mean). Then flash it using this command: fastboot flash boot KERNELNAME.img (where KERNELNAME.img is the name of the kernel)
If you want, you can download a rom, open it with winrar or something and extract the Boot.img (this is the kernel), the command would then be: fastboot flash boot boot.img
Then type: fastboot reboot
You should then be able to reboot into recovery (press volume down a couple of times on reboot). There you can flash a rom.
Click to expand...
Click to collapse
Dude You're awesome. Many many thanks for saving my Ray . __/\__
ravi4theja said:
Dude You're awesome. Many many thanks for saving my Ray . __/\__
Click to expand...
Click to collapse
No problem :good:
Related
Hi ,everyone.
I'm a member of the Untitled Xperia Team from China .As is known to all ,sony has realesed the ics update to xperia p ,but we have no a advanced kernel for ics ,and now I provide you the kernel.
Kernel features:
Auto root
New necovery
Init.d scripts support
Thanks to:
DooMLoRD (his aoto root scripts and more)
Androxyde (tell me how to get the base address of kernel&ramdisk)
Bin4ry
CyanogenMod for kernel source
Sony for ICS update
wow~~~ Support of UXT :victory:
wow great news. Thank you
secretgate said:
wow great news. Thank you
Click to expand...
Click to collapse
Work for locked bootloader?
xtnsion said:
Work for locked bootloader?
Click to expand...
Click to collapse
Unlock bootloader needed!
can someone write down a proper quide to install this kernel???
Can someone make that for locked bootloader?
i think this is not possible! kernel update needs allways a unlocked bootloader
Yes, you right. Teoretical locket bootloaders can change ROM without kernel.
popolaros said:
can someone write down a proper quide to install this kernel???
Click to expand...
Click to collapse
you need:
bootloader unlocked
working fastboot
and read this http://forum.xda-developers.com/showthread.php?p=23181182#post23181182
popolaros said:
can someone write down a proper quide to install this kernel???
Click to expand...
Click to collapse
1. Unzip the file, you get filename.elf
2. Put the elf file into fastboot folder on computer
3. Turn off the phone completely
4. Hold volume-up button and plug-in the USB cable (to enter fastboot mode)
5. See BLUE LED on the phone
6. Open Command Prompt in fastboot folder (Shift+ Right Click Mouse, choose Command Prompt)
7. In command window, type "fastboot.exe flash boot filename.elf" (don't type double quote)
8. Wait for flash process completed, un-plug the phone, turn it on, here you go with new kernel
flash kernel with fastboot
for installing a kernel you can use fastboot
the phone should be in fastboot mode:
shut down the phone
push the volume op button and connect the usb cable (the led-light should become blue)
windows
fastboot.exe flash boot kernel.elf
unix
sudo ./fastboot flash boot kernel.elf
kernel.elf is the name of the kernel
Or you can use the unlock tool which is in Xperia S development section and where it says select IMG or SIN file locate the kernel. Click Flash and you are done. Make sure the phone is in fastboot. Also if you want to enter recovery, when the blue light is on, hold the Volume Up button
EDIT: Here is the program, http://forum.xda-developers.com/showthread.php?p=29281222
USB connection not working
The usb connection is not working in recovery.
I cannot mount the internal storage on my PC from recovery. (ubuntu)
many thanks
Black screen when I use AROMA with this
hagen.von.tronje said:
The usb connection is not working in recovery.
I cannot mount the internal storage on my PC from recovery. (ubuntu)
Click to expand...
Click to collapse
Same here, also using Linux (PCLinuxOS)
please tech me , base address parameter...
Hi.
I'm poor english language , sorry.
i try generate elf image.
but , but , not boot android system.
plaease tech , your setting boot mkelf.py parameter .
and putting my create elf parameter extract script and elf image file.
thanks advaice.
tbschommer said:
Same here, also using Linux (PCLinuxOS)
Click to expand...
Click to collapse
Can you see if a usb device is connected at all? with lsusb command?
If I connect the phone in recovery and type lsusb there is no device listed.
So I guess the usb connection doesn't work on windows either.
Can someone confirm that usb-connection in recovery is not working in windows?
hagen.von.tronje said:
Can you see if a usb device is connected at all? with lsusb command?
If I connect the phone in recovery and type lsusb there is no device listed.
So I guess the usb connection doesn't work on windows either.
Can someone confirm that usb-connection in recovery is not working in windows?
Click to expand...
Click to collapse
confirmed
Hi, i think i have a problem with the wrong kernel installed.
I have a SXSwith ICS and since a couple of days i tried to unlock the bootloader, put Doomlords CWM on it an root it, because i like to try another ROM.
I Unrooted it via the official way wich worked out good, the only thing strange was that i restarted and it seemed the whole phone was resetted.
Than i wanted to root and i had to put the phone in recovery mode, and i choose the doomlord CWM and flashed it using this guide
.
Xperia S
1.Download the Doomlord CWM Recovery image (download link here) and the Wi Fi Module for Doom Kernel (download link here) and place the same to the computer.
2.Go and rename the “S-DooMKernel-v01_kernel.elf” file into “kernel.elf”.
3.Copy the file renamed on the same folder with ADB / fastboot.
4.Take your phone and its USB cord and by using both connect it with the computer.
5.Copy-paste the “S-DooMKernel-v01-Modules.zip” file from the PC to the Xperia S SD card.
6.Disconnect the smartphone from the computer.
7.Reboot it by entering in fastboot; press the Volume Up button while connecting the phone with the PC.
8.On the computer open command prompt (Start -> run -> cmd) and enter the command: fastboot flash boot kernel.elf. If this isn’t working try with: fastboot -i 0x0fce flash boot kernel.elf.
9.The handset should reboot.
10.When you see the light turn blue hold the Voluem Up button. The Xperia S will enter in recovery mode.
11.In the recovery menu select “install zip from sd card” and pick the file copied there on step 3.
12.The installation procedure should begin. Don’t press anything as the process might take up to 10 minutes to complete.
13.In the end, from the recovery mode menu select “reboot system now” and you are done.
There you have it; that was the easiest and fastest way in which you can learn how to install Doomlord’s ClockworkMod Recovery on your Xperia S smartphone. Do tell us if there were problems on your way, of if you had issues in understanding one of my directions. Now you can go and update your Xperia S with the lasts ROMs available. Take a look and see if the
Everything seemed to be working but the phone is stuck in Doomlords bootloops.
If i hold the volume up than i can enter CWM but the phone doesn,t start anymore.
The phone was running on a stock ICS ROM (i believe the Swiss one)
I flashed this kernel, 2.6.35.11/Doomkernel.nr1 and SDoomkernel v01 Modules.zip
Who can help me out since i,m stuck here.
doomlord kernel is for GB since youre on ICS try KA Kernel, XSX Kernel, and the Advanced stock ICS. look in the development section. you can flash it in CWM since youve flash doomlord kernel or try to flash via fastboot.
Thanks for your quick response, how can i put the kernel on the internal sd?
the phone doesn't start, so it wont be recognised by windows, i tried to mount in CWM but windows doesn't see it.
If i flash in fastboot mode, do i have to change the name again and wich name if i take the KA kernel for example.
Thanks
koossmatrooz said:
Thanks for your quick response, how can i put the kernel on the internal sd?
the phone doesn't start, so it wont be recognised by windows, i tried to mount in CWM but windows doesn't see it.
If i flash in fastboot mode, do i have to change the name again and wich name if i take the KA kernel for example.
Thanks
Click to expand...
Click to collapse
Just downlaod the advanced stock kernel (the fastboot link) and flash it in fastboot
It will boot :good:
just download any of the 3 but u need the .elf file and then flash via fastboot you dont need to change the name just used the name youve downloaded to flash.
for example : ics14.elf
used fastboot or adb
fastboot flash boot ics14.elf
you can also used the flashtool, flash via fastmode then choose the ics firmware you have then flash only the kernel. uncheck everything except the kernel.
but the easy way to do is flash via fastboot mode.
I just tried using flashtool, everything goes fine exept it doesnt flash.
Downloaded the Stock "Swiss" ROM and tried to flash with flashtool, it recognised the device, because it says device connected, then it askes to unplug en plug in the device, which i've done then the pop up that tells to disconnect/connect the device stays on and nothing happens.
I'm getting a little worried now...
Thanks for your replie
hey you have working fastboot right or adb? flash a kernel like what ive said above using fastboot,
or you can try this, dont connect your phone to pc yet, make sure it is turn off (hold power button +power up wait till it vibrates 3 times.)
1. open flashtool
2. choose your firmware.
3. when it says unplugged your phone,connect your phone to pc then hold power button +volume up wait till it vibrates 3 times, then hold power button + volume down then release it will flash.
Thanks for all the replies, i got it working.
Seems that i turned my phone one in fastboot mode and not the flashmode...oops
Flashed the original Swiss ROM again and it works again, thankgod!
But i dont want the original anymore, can i just flash another available rom on the android dev section or do i need to root? Sorry for beeing such a noob.
yes you can just flash any custom kernel it will give you auto root, then u can start flashing rom via cwm. just follow the instructions in every rom.
I am having the same problem as I am stuck with DoomLord's boot loop. I tried to flash ICS stock rom but cant get to flash it. I tried holding the power button + volume up key(until i get the three vibration) and then hold power button + volume up key and release, I get the same DoomLord's boot loop again. I am using X10 Flashing Tool Version 0.8.0.0 Somebody please help me. The device can fast boot.
download the latest flashtool, then download ICS stock firmware of your choice on the general section, then flash it via flashmode. (power+volume down)
Hi,
I'm on the process of installing ClockWorkMod Recovery, stupid of me i forgot to enable USB Debugging option on my phone. Now I'm stuck on Command Prompt saying...
C:\Fastboot>fastboot flash boot recovery-nozomi.img
< waiting for device >
It has been sitting for more than 5 minutes as I am typing now. Should I disconnect the USB cord? Would this action brick my phone?
Sorry for my stupidity!
cybrkada said:
Hi,
I'm on the process of installing ClockWorkMod Recovery, stupid of me i forgot to enable USB Debugging option on my phone. Now I'm stuck on Command Prompt saying...
C:\Fastboot>fastboot flash boot recovery-nozomi.img
< waiting for device >
It has been sitting for more than 5 minutes as I am typing now. Should I disconnect the USB cord? Would this action brick my phone?
Sorry for my stupidity!
Click to expand...
Click to collapse
How are you installing it ???
Via flash tool??
And nope your phone won't brick
I disconnected the cord. Turned on the phone and noticed that USB Debugging is ticked/checked. So I repeated the process but I am still getting..
< waiting for device >
What should I do?
soulhackereborn said:
How are you installing it ???
Via flash tool??
And nope your phone won't brick
Click to expand...
Click to collapse
Yes, via Flastool. Yeah my phone did not get bricked! :good:
cybrkada said:
Yes, via Flastool. Yeah my phone did not get bricked! :good:
Click to expand...
Click to collapse
can u give the link for this recovery you triein to push through flashtool and the turorial if possible...
soulhackereborn said:
can u give the link for this recovery you triein to push through flashtool and the turorial if possible...
Click to expand...
Click to collapse
Hi soulhackereborn!
Sorry for the late reply! Sorry the forum prevented me from posting the URL as I am just a new user here.
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Anyway the tutorial says (copy&paste):
Use the computer for downloading the CWM file from here.
Then, on the same computer download fastboot from here.
Extract fastboot on C:\ drive.
Then, copy the downloaded “ecovery-nozomi.img” file to the Fastboot folder from your computer.
Now you must connect the phone in fastboot mode with the computer.
In order to do so you must plug the USB cord to the PC, then on your phone press and hold the Volume Up button and while doing this connect the USB cable to your Xperia S.
Up next, on the PC click on “Start -> Accessories -> on Command prompt right click -> Run as administrator”.
The command prompt window will now be displayed.
Now, enter the following commands (press enter after each one): “cd c:\Fastboot” and “fastboot flash boot recovery-nozomi.img”.
CWM will now be flashed.
In the end the “finished / OKAY” message should be displayed.
In command prompt enter “fastboot reboot”.
Your handset should now reboot into ClockworkMod recovery.
Remove the USB cord and disconnect the Xperia S from the computer.
cybrkada said:
Hi soulhackereborn!
Sorry for the late reply! Sorry the forum prevented me from posting the URL as I am just a new user here.
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Anyway the tutorial says (copy&paste):
Use the computer for downloading the CWM file from here.
Then, on the same computer download fastboot from here.
Extract fastboot on C:\ drive.
Then, copy the downloaded “ecovery-nozomi.img” file to the Fastboot folder from your computer.
Now you must connect the phone in fastboot mode with the computer.
In order to do so you must plug the USB cord to the PC, then on your phone press and hold the Volume Up button and while doing this connect the USB cable to your Xperia S.
Up next, on the PC click on “Start -> Accessories -> on Command prompt right click -> Run as administrator”.
The command prompt window will now be displayed.
Now, enter the following commands (press enter after each one): “cd c:\Fastboot” and “fastboot flash boot recovery-nozomi.img”.
CWM will now be flashed.
In the end the “finished / OKAY” message should be displayed.
In command prompt enter “fastboot reboot”.
Your handset should now reboot into ClockworkMod recovery.
Remove the USB cord and disconnect the Xperia S from the computer.
Click to expand...
Click to collapse
everything seems to be good in the tutorial though..
But what is it a kernel, rom or an CWM image file ???
if still it says waiting for device then here's a couple things you should check :-
1) Fastboot ie; S1 Boot driver installed or no
2) Switch off phone and connect it to the PC via usb holding Volume + button (this is fastboot mode)
3) Check does your device remain in fastboot mode or no i mean purple led light glows stays on continuously or no until u execute the command, if not reinstall the driver and try again
4) If everything well till now try flashing with the given commands without the quotes ie; fastboot flash boot recovery-nozomi.img
soulhackereborn said:
everything seems to be good in the tutorial though..
But what is it a kernel, rom or an CWM image file ???
if still it says waiting for device then here's a couple things you should check :-
1) Fastboot ie; S1 Boot driver installed or no
2) Switch off phone and connect it to the PC via usb holding Volume + button (this is fastboot mode)
3) Check does your device remain in fastboot mode or no i mean purple led light glows stays on continuously or no until u execute the command, if not reinstall the driver and try again
4) If everything well till now try flashing with the given commands without the quotes ie; fastboot flash boot recovery-nozomi.img
Click to expand...
Click to collapse
1. I dont know how to check, it should be installed as i unlock the bootloader yesterday. I actually manually updated it on Device Manager.
2. I understand this.
3. On my case, it's a blue LED lit steadily after doing step 2. I am using Sony Xperia S.
4. Yes, i flashed them without the quotes.
cybrkada said:
1. I dont know how to check, it should be installed as i unlock the bootloader yesterday. I actually manually updated it on Device Manager.
2. I understand this.
3. On my case, it's a blue LED lit steadily after doing step 2. I am using Sony Xperia S.
4. Yes, i flashed them without the quotes.
Click to expand...
Click to collapse
Try rebooting both your PC and phone... This is a small thing but always helps and one more thing after switching off the phone n before connecting it in fastboot mode let der be a gap of alteat a min or two
Is this tutorial on xda or some other forum if on xda then try messaging me the link or tel me forum sub forum topic and title
Usually <waiting for device> can show up when you don't have proper drivers installed. Double check them if you haven't done so.
soulhackereborn said:
Try rebooting both your PC and phone... This is a small thing but always helps and one more thing after switching off the phone n before connecting it in fastboot mode let der be a gap of alteat a min or two
Is this tutorial on xda or some other forum if on xda then try messaging me the link or tel me forum sub forum topic and title
Click to expand...
Click to collapse
I dont see PM here, i think I am still restricted.
see if the link helps, i removed w w w
android.gs/install-clockworkmod-recovery-sony-xperia-s
i'm rebooting them after this.. thanks
LiveSquare said:
Usually <waiting for device> can show up when you don't have proper drivers installed. Double check them if you haven't done so.
Click to expand...
Click to collapse
Which drivers? I have already downloaded SDK and I believe the S1 driver is installed yesterday when i unlock the bootloader.
i rebooted both the PC and the CP, but i am still getting < waiting for device >...
by the way is the ADB from tutorial the SDK one?
cybrkada said:
i rebooted both the PC and the CP, but i am still getting < waiting for device >...
by the way is the ADB from tutorial the SDK one?
Click to expand...
Click to collapse
Dude as far as I know there is no need to check/ tick USB debugging for fastboot... It's just for flashtool..
Try re -installing the drivers again manually or let windows search over internet...
Finally, i made it! thanks to both of you!
fastboot.exe seems to be corrupted!
Problem solved!
Just last one question, now that i have CWM recovery on my phone, is it already rooted? sorry i am beginner...
cybrkada said:
Just last one question, now that i have CWM recovery on my phone, is it already rooted? sorry i am beginner...
Click to expand...
Click to collapse
Yes ur rooted!!
Thanks!
I'm currently downloading Cyanogenmod ver 9.1. Hopefully it works! Thank you so much buddy! You have been very helpful! If I get problems on flashing CM9.1, i'll contact you , hehe
One of the reminders on isntalling CM9 is:
Make sure that your Xperia S is already running a rooted firmware, and that it has the ClockworkMod Recovery properly installed.
How do I know I have a rooted firmware? Do I still need to flash FTF file?
By the way, I am getting a boot loop from CWM recovery, I cant go to the homescreen, no option to turn off! It only reboots the CWM.
(Still downloading CM9 as of the moment)
Hi, I tried to install a custom JB rom on my Sony Xperia U but now I'm in a reboot loop when i connect my device to the computer it connects and disconnects all the time cannot even flash please help thanks.
Are you connecting it off, then holding Vol - to trigger fastboot on USB? Don't do it when it's bootlooping.
Check the following things:
1 you have unlocked bootloader.
2 you have Xperia u fastboot and flashing drivers properly installed.
Reinstall drivers if you aren't sure whether they're properly installed or not
3 you said you're getting bootloop so your device isn't bricked..
4 take out the battery and insert again and press volume down button for flashmode and flash stock ics
5 flash boot.img from kernel zip file in FASTBOOT MODE.. If you're not sure how to do that there's a guide available in forum.. Search for it
6 then reboot to recovery, do wipes, then flash the Rom...
7 reboot twice
8 second reboot takes 10 mins don't freak out its normal
9 enjoy
AD9295 said:
Check the following things:
1 you have unlocked bootloader.
2 you have Xperia u fastboot and flashing drivers properly installed.
Reinstall drivers if you aren't sure whether they're properly installed or not
3 you said you're getting bootloop so your device isn't bricked..
4 take out the battery and insert again and press volume down button for flashmode and flash stock ics
5 flash boot.img from kernel zip file in FASTBOOT MODE.. If you're not sure how to do that there's a guide available in forum.. Search for it
6 then reboot to recovery, do wipes, then flash the Rom...
7 reboot twice
8 second reboot takes 10 mins don't freak out its normal
9 enjoy
Click to expand...
Click to collapse
Thanks!, It worked my device is working normally now .. but I can't really find a guide on how to install the boot.img can you please link me to it ? thanks.
GoldenMikez said:
Thanks!, It worked my device is working normally now .. but I can't really find a guide on how to install the boot.img can you please link me to it ? thanks.
Click to expand...
Click to collapse
the command for fastboot is
fastboot flash boot boot.img
the boot.img file must be in same folder as fastboot
there are two methods :
i recommend second method..
1. using command prompt
procedure - download adb and fastboot drivers.. extract them anywhere in pc.. copy the boot.img file to that extracted folder (i cant find the thread which contains the link for the drivers but u can definitely get it by google-ing it)
press and hold shift and right click..
select open command window here
switch off your phone
hold vol up key on ur phone and connect it to pc.. (blue led will come up)
then pass the command in command prompt as - fastboot flash boot boot.img
or
2 using flashtool
open flashtool
switch off your phone
hold vol up key on ur phone and connect it to pc.. u'll see in the flashtool that - device connected in fastboot mode
then clickon flash button and select fastboot
click on select kernel to flash and select boot.img which u extracted from kernel file..
Do these steps quickly.. fastboot mode automatically shuts down after 15-20 seconds and ur phone will start charging itself..
after flashing jb kernel reboot in recovery and then follow next steps
Enjoyy
reboot loop
im in a bootloop with a phantom kernel and i didnt place the rom in the phone storage, the telephone is rebooting again and again. i can acces to the CWM but i don't know how i can transplant the rom now :crying: thanks
I erase my system by using the fastboot command " erase system -w " and flash a kernel in this topic http://forum.xda-developers.com/xperia-u/go-development/sony-xperia-property-root-6-0-b-3-184-t1888247 and reboot ! now my phone don't connect to the PC it appear unknown device and can't use fastboot again and all that appear on the screen is Sony "under it " custom
is there any hope ?!
Mostafa8296 said:
I erase my system by using the fastboot command " erase system -w " and flash a kernel in this topic http://forum.xda-developers.com/xperia-u/go-development/sony-xperia-property-root-6-0-b-3-184-t1888247 and reboot ! now my phone don't connect to the PC it appear unknown device and can't use fastboot again and all that appear on the screen is Sony "under it " custom
is there any hope ?!
Click to expand...
Click to collapse
Is there any change you still have your custom recovery on?
If so, you can flash another ROM onto your phone.
prasanth21 said:
Is there any change you still have your custom recovery on?
If so, you can flash another ROM onto your phone.
Click to expand...
Click to collapse
I found that the error was in the USB cable when I switched to use another one all goes well and I flashed new ROM
thank you for replying .
OS deleted from Xperia P
prasanth21 said:
Is there any change you still have your custom recovery on?
If so, you can flash another ROM onto your phone.
Click to expand...
Click to collapse
I accidentally deleted OS from my Xperia P and the phone is stuck at the Sony Logo with the storage completely erased. Now the PC won't detect phone. I have tried changing the usb cable as well as tried on multiple computers but nothing works. Can you please help me out.
Jamal Shah said:
I accidentally deleted OS from my Xperia P and the phone is stuck at the Sony Logo with the storage completely erased. Now the PC won't detect phone. I have tried changing the usb cable as well as tried on multiple computers but nothing works. Can you please help me out.
Click to expand...
Click to collapse
What do you mean by "PV won't detect the phone?".
It cannot be dected like it does usually.
The phone must be turned off (press power + volume up untill you feel (1+) 3 vibrations. Then you should be able to flash in flash mode, either with PC Companion or flashtool.
even i got my xperia p screwed there is no custom recovery no os what to do ? please help me
thanks in advance
Solution
Mostafa8296 said:
I erase my system by using the fastboot command " erase system -w " and flash a kernel in this topic http://forum.xda-developers.com/xperia-u/go-development/sony-xperia-property-root-6-0-b-3-184-t1888247 and reboot ! now my phone don't connect to the PC it appear unknown device and can't use fastboot again and all that appear on the screen is Sony "under it " custom
is there any hope ?!
Click to expand...
Click to collapse
try this url http://talk.sonymobile.com/t5/Xperia-ray/deleted-os-and-phone-won-t-boot/td-p/218216
hope it works
Secondary solution
download flashtool and install it on your pc. Then go to this pc system:c flashtool . Open the folder drivers then install the drivers suitable .
then boot your phone in custom recovery mod and click boot in flash mode.then connect your phone to the pc then download the firmware for your phone .Then open flashtool and click the flash icon on the top and select the firmware and click flash a
and the phone will be ready to use .
hope this will help
Maybe flash ftf file with flashtool can fix it?
i always use flashtool when i met your problem,i think it would help you