I rooted my NT back in Dec. 2011 when I bought it, using instructions from this forum. (thank you!) I also used the fix to stop it from automatically getting the B&N updates.
I've been happy with the NT as it is now, but I'd like to be able to run things like Xbox Smartglass, and I see that we can use CM10 on the NT.
My questions are "should I? and can I?" Would I have to take the NT back to stock and then start over? Boot from SD or root? Is this even something a noob should be attempting?
As long as it's rooted, no you shouldn't have to take it to bone stock.
Do you already have a custom recovery installed? If so, it's super easy. If not, follow the instructions in the development forum on how to flash a custom recovery. Keep in mind you need CWM 6+ or TWRP 2.2+ (I think, never used twrp) to flash a jellybean rom.
Should you? Totally up to you. As long as you don't mess with the touch firmware (don't install 5 touch) then you can always go back to where you are now.
Every rom has some issues. I haven't found a single one that's issue free. Most of the newer ones run without any major issues.
Sent from my Liquefied Skyrocket
Quando Omni Flunkus Moritati
liquidzoo said:
Keep in mind you need CWM 6+ or TWRP 2.2+ (I think, never used twrp) to flash a jellybean rom.
Click to expand...
Click to collapse
TWRP 2.1.3 will handle ICS and JB ROMS... BUT WAIT! If you plan to update the touchpad firmware (which I highly recommend) and use one of the 5 touchpoint ROMS, make sure you are using CWM, not TWRP! Once you update the firmware, you won't be able to use TWRP (that is, you can still boot to recovery, and TWRP will load without problems, but it won't register any touches on the screen...)
This thread has the updated version of CWM, and will (eventually) have a link to the updated version of TWRP, once it's ready for prime time.
http://forum.xda-developers.com/showthread.php?t=1966894
spcagigas said:
TWRP 2.1.3 will handle ICS and JB ROMS... BUT WAIT! If you plan to update the touchpad firmware (which I highly recommend) and use one of the 5 touchpoint ROMS, make sure you are using CWM, not TWRP! Once you update the firmware, you won't be able to use TWRP (that is, you can still boot to recovery, and TWRP will load without problems, but it won't register any touches on the screen...)
This thread has the updated version of CWM, and will (eventually) have a link to the updated version of TWRP, once it's ready for prime time.
http://forum.xda-developers.com/showthread.php?t=1966894
Click to expand...
Click to collapse
Apparently I'm an even bigger Noob than I thought, b/c I have absolutely no idea what any of that means. Can you recommend good tutorials for really raw noobs?
nearlyno0b said:
Apparently I'm an even bigger Noob than I thought, b/c I have absolutely no idea what any of that means. Can you recommend good tutorials for really raw noobs?
Click to expand...
Click to collapse
There are a few excellent threads in the General forum that are a really good place to start. Here are three to start with that should give you a good grounding on what's going on when you root and flash your tablet, and step-by-step instructions on how to do it:
PLEASE READ! An Introduction to Android Rooting, Custom Recoveries, and Custom ROMs
FAQ:NT Reference Thread | Tips&Tricks | How to's | Videos | NEW USER? PLEASE READ!
SD Root 8gb AND 16gb: Consolidation Thread Using SD Boot by Albert Wertz
Thanx very much for your reply, and your patience, and the links! :good:
Oh, dear, will having Win8 on my computer make this all more difficult than it needs to be?
nearlyno0b said:
Oh, dear, will having Win8 on my computer make this all more difficult than it needs to be?
Click to expand...
Click to collapse
It shouldn't.
Related
Hey folks,
I just bought the white international SGS II and i'm loving it!
I previously had an Infuse 4g, so I am pretty experienced with flashing/backing up/ restoring...but I have questions/concerns regarding the I9100.
I am about to try out the CM9 Unstable, so I backed my current stock ROM up using CWM Manager 3.0 (I am on CF-Root 5.0) onto my Internal SD, as I do not have an external SD card.
Now, I have had bad experiences with CM7 with Infuse and ended up not being able to restore due to many problems like MD5 mismatch, different CWM version, and problems while restoring ( I think it said something like devblock??)
So I'm pretty worried about not being able to restore back to the backup i just made.
So correct me if I'm wrong folks,
1) Go into CWM, flash CM9(once? twice?), Gapps, Faceunlock,
2) Data wipe/factory reset
3) Reboot
and should I choose to restore back to the stock Rom backup,
just go into CM9's recovery and restore..?
will this method give me problems restoring? will I have different versions of CWM recovery from the one I have currently? Is there any way to check if my back up was made properly?
Thanks a lot folks! Appreciate it!
Edit: "Make sure you're already running ICS bootloader (if not, go to SamMobiles and flash XXKP2 bootloader)". Is this necessary? Cus I have seen some folks say that they've not and was fine installing CM9.
First the procedure:
1. Wipe
2. Install CyanogenMod 9
3. Reboot
4. Install CyanogenMod again
5. Install gapps and face-unlock
Worked for me every time.
Your backups should work unless there were errors while creating them.
If you want some more safety, you can create a new backup after flashing the Siyah-kernel. The latest version uses the same version of ClockWorkMod as CyanogenMod 9.
Whether you need to flash the bootloader or not, depends on whether you already have it or not. I'm running galnet-MIUI and already had the bootloader installed. I don't know how to tell if you have it.
Sent from my GT-I9100 using XDA App
Ok...
I did further research and found out that Nandroid backup backs up everything EXCEPT the kernel.
I'm pretty sure that CM has its own kernel...but will it be CWM 5.0.2.7(the one i made backup in.)?
If it's not, the correct steps for me to restore my nandroid back up is to
1)boot into download mode from CM9,
2) put the cf-root kernel that i used in the ODIN PDA, flash,
3) turn off phone, reboot into CWM, then restore my nandroid back up right??
Can anyone please confirm this method??
I only have this phone and I cannot risk soft-bricking or hard-bricking this beautiful device.
Thanks in advance!
Also, i made a back up in blue recovery of CWM 5.0.2.7..does that matter?
TheSniperFan said:
First the procedure:
1. Wipe
2. Install CyanogenMod 9
3. Reboot
4. Install CyanogenMod again
5. Install gapps and face-unlock
Worked for me every time.
Your backups should work unless there were errors while creating them.
If you want some more safety, you can create a new backup after flashing the Siyah-kernel. The latest version uses the same version of ClockWorkMod as CyanogenMod 9.
Whether you need to flash the bootloader or not, depends on whether you already have it or not. I'm running galnet-MIUI and already had the bootloader installed. I don't know how to tell if you have it.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
thanks for the reply,
so I must have the ICS bootloaders in order for CM9 to work?
ooo siyah kernel method... that makes it easier! haha thanks so much!
I will proceed to do that!
btw, how is CM9 working for you?
do you think you'll be able to use it as a daily driver now that NITZ is gone??
1. Afaik cwm backs the kernel up and restores it too. (afaik = 99.9% sure, in this case)
2. CyanogenMod ships with its own kernel.
3. The kernel is not cwm. ClockWorkMod is just the recovery that is integrated into the kernel. CyanogenMod 9 has cwm-recovery 5.5 (Siyah too btw)
4. You don't need to use download-mode to restore.
Sent from my GT-I9100 using XDA App
You must have ICS-bootleggers. He did not say that for fun xD.
Is it suitable as daily driver for me?
Nope.avi
Why?
Accelerometer is unresponsive, so it takes forever to flip your screen.
Battery drainage is horrible.
Camera isn't working properly.
And the biggest no-go for me:
The device gets way to hot when using it.
Sent from my GT-I9100 using XDA App
TheSniperFan said:
You must have ICS-bootleggers. He did not say that for fun xD.
Is it suitable as daily driver for me?
Nope.avi
Why?
Accelerometer is unresponsive, so it takes forever to flip your screen.
Battery drainage is horrible.
Camera isn't working properly.
And the biggest no-go for me:
The device gets way to hot when using it.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
alright,
thanks for the information!
I'll flash the Siyah kernel
Btw,
Flashing CM9 Zip does not flash the ICS bootloader right?
so then if I want to restore to my GB 2.3.5, would I need to flash GB bootloaders before restoring via Odin??
If the zip would flash the loaders, he wouldn't have mentioned it.
They're backwards-compatible.
Sent from my GT-I9100 using XDA App
If you need to make a post in the Q&A forums about flashing CM9, then you are definitely not the sort of person who should be flashing it. It is in very much a beta stage and there is a very high possibility it will **** your phone up even if you have done nothing wrong. If that happens you need to be the sort of person with enough experience to solve the problem by themselves. If you are asking questions before you've even flashed it then really, it's not for you. Use CM7, at the moment it's better than CM9 in every single way.
postfatal said:
If you need to make a post in the Q&A forums about flashing CM9, then you are definitely not the sort of person who should be flashing it. It is in very much a beta stage and there is a very high possibility it will **** your phone up even if you have done nothing wrong. If that happens you need to be the sort of person with enough experience to solve the problem by themselves. If you are asking questions before you've even flashed it then really, it's not for you. Use CM7, at the moment it's better than CM9 in every single way.
Click to expand...
Click to collapse
It's not thaaaaaaaaat bad. I mean, he won't be able to brick the device through cwm.
If he doesn't ask, he will never learn and it's always better to ask twice than to break something.
Sent from my GT-I9100 using XDA App
Thank you sniper =) really appreciate the support.
Ive been flashing and restoring before with my infuse 4g. Just sometimes ran into problems with restoring with diff CWM versions and stuff. This phone is very precious(expensive) so i thought i would learn it for sure before i attempted anything.. thanks anyways for sharing your opinion!
Sent from my GT-I9100 using XDA App
TheSniperFan said:
It's not thaaaaaaaaat bad. I mean, he won't be able to brick the device through cwm.
If he doesn't ask, he will never learn and it's always better to ask twice than to break something.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I couldnt agree more... i think people here on XDA need to stop trying to be all hot **** saying Oh you asked a question your a noob... in reality most ppl here want to ask the same question but dont because afraid of getting *****ed out... and when someone else asks... try to be badass and put the person down...
Iv used a Galaxy S and a Moto Atrix and now a S2... flashed the life out of each phone along with all kinds of stuff and mods... yet i would have wanted to ask these same questions before flashing hence googled and found this thread... So thanks to those that replied as well... i was about to flash ics till i read this and guess imma hold back now even more...
But again i think people here need to calm the hell down... a person asks a question in the thread and you call them a 'noob' and what not... a person asks a question in the Q&A section and again you tell them off... stop being such anal retentive trolls...
DrunkFuX666 said:
I couldnt agree more... i think people here on XDA need to stop trying to be all hot **** saying Oh you asked a question your a noob... in reality most ppl here want to ask the same question but dont because afraid of getting *****ed out... and when someone else asks... try to be badass and put the person down...
Iv used a Galaxy S and a Moto Atrix and now a S2... flashed the life out of each phone along with all kinds of stuff and mods... yet i would have wanted to ask these same questions before flashing hence googled and found this thread... So thanks to those that replied as well... i was about to flash ics till i read this and guess imma hold back now even more...
But again i think people here need to calm the hell down... a person asks a question in the thread and you call them a 'noob' and what not... a person asks a question in the Q&A section and again you tell them off... stop being such anal retentive trolls...
Click to expand...
Click to collapse
Most people should not flame some one as long as they show they have at least tried to look for an answer first. Yes we were all new at one time but we all learned.
Like you said you Googled and found your answer. Not that hard.
Think it's bad now. Should have seen it a few years ago. Lol clutter up the threads with questions that the answers were found with a search. You got warned. Do it twice and you went on vacation for a few days to learn how to search. So the next time you think people are being too hard. Remember it is not as hlbad as it was.
When I search for the answer, I ended up here.
are these considered ICS bootloaders? If not, when would you flash them, because they are completely unmentioned in any of the instructions or FAQs
CWM flashable Modems:
XXKP8 Modem: http://www.multiupload.com/64J2P1MZL6
XXKP4 Modem: http://www.multiupload.com/NYUYFOT1ST
Hey, I just bought a Samsung Galaxy S3 I9300 and so far I think it's the best!
I have been checking this site a lot to get an idea of what I'm actually buying and now I would like you pros to teach me a few things if you've got the time.
1) I got my device already rooted, though i know how to do it myself.
When I got it there was SuperSU and ClockworkMod Recovery installed on it.
I checked a bit on the internet and couldn't quite get what ClockworkMod is for... When is it mainly useful?
2) I keep reading about CyanogenMod being used in order to update my firmware... but I also read about it being used with ClockworkMod... probably for backup purposes? Care to explain what it is used for?
3) Which leads me to my final question. I search a lot on the internet and came across posts that say that Android 4.2.2 should be released on May/June... I also noticed a lot of websites saying there are already ways to get the update with apps like CyanogenMod.
So is it really safe to get it already? I know I should backup everything anyways just in case but will it be any different from when the official update comes out?
Thank you for your patience and sorry for being a noob
unknown2u2a said:
Hey, I just bought a Samsung Galaxy S3 I9300 and so far I think it's the best!
I have been checking this site a lot to get an idea of what I'm actually buying and now I would like you pros to teach me a few things if you've got the time.
1) I got my device already rooted, though i know how to do it myself.
When I got it there was SuperSU and ClockworkMod Recovery installed on it.
I checked a bit on the internet and couldn't quite get what ClockworkMod is for... When is it mainly useful?
2) I keep reading about CyanogenMod being used in order to update my firmware... but I also read about it being used with ClockworkMod... probably for backup purposes? Care to explain what it is used for?
3) Which leads me to my final question. I search a lot on the internet and came across posts that say that Android 4.2.2 should be released on May/June... I also noticed a lot of websites saying there are already ways to get the update with apps like CyanogenMod.
So is it really safe to get it already? I know I should backup everything anyways just in case but will it be any different from when the official update comes out?
Thank you for your patience and sorry for being a noob
Click to expand...
Click to collapse
Woah you've got everything upside down. Read some of the sticky threads and FAQ's as this is all answered there but you do appear to be massively confused.
rootSU said:
Woah you've got everything upside down. Read some of the sticky threads and FAQ's as this is all answered there but you do appear to be massively confused.
Click to expand...
Click to collapse
I have read the sticky threads and the FAQs and it does not say what ClockworkMod and CyanogenMod do exactly... that's why I posted this thread.
Oh, and I watched the noob video :silly: I'm not posting this for no reason...
Would you please explain it to me?
unknown2u2a said:
I have read the sticky threads and the FAQs and it does not say what ClockworkMod and CyanogenMod do exactly... that's why I posted this thread.
Oh, and I watched the noob video :silly: I'm not posting this for no reason...
Would you please explain it to me?
Click to expand...
Click to collapse
OK.
It's quite complicated, so bear with me.
Your device before rooted, consists of:
An Android OS (Your Main phone operating system)
A Recovery OS (Another operating system that is used to do things like factory reset your device if you cannot boot into Android)
Bootloader (This is the first thing that boots. It wil choose if you boot into android or recovery, depending on if you press any buttons at boot up)
So that is the BASIC OS layout.
When you root, often your stock recovery is replaced with a custom one. This is usually ClockworkMod recovery. There are other alternatives though. This recovery can be used to take backups of the phone and flash Custom Android ROMs and mods (Flashable zips). Sometimes, ClockworkMod recovery (CWM) has an app (CWM manager) to help you reboot into recovery. Although you can just hold volume up and home, then press power to turn on the device and boot into recovery.
CyanogenMod are one of the most famous develiopment teams of custom ROMs. There are 2 types of custom roms on the S3. Those that are directly built on Samsung Android ROMs (with touchwiz and all that jazz) and ones based directly on Google source code (Known as AOSP or Android Open Source Project).
There are a few famous AOSP develpment teams.
CyanogenMod (CM)
AOKP (Android Open Kang Project)
Paranoid Android (AOSPA)
These are much more like what you get on a Nexus device instead of the Samsung devices.
When rooting, or if you have a custom ROM, you need an app called SuperUser or SuperSU which manages applications root access. Any app that needs root access, requests it from SuperSU or SuperUser which prompts you if you want to allow it. See it as a gatekeeper, or a layer of security for your benefit.
Hope this helps.
Not complicated at all
Thank you for clearing that out.
So what about 4.2.2? I read that I can install a custom mod of it but that the official s3 i9300 update isn't out yet.
Does that mean it's risky or might have different features from the official update?
Thanks again for your time!
unknown2u2a said:
Not complicated at all
Thank you for clearing that out.
So what about 4.2.2? I read that I can install a custom mod of it but that the official s3 i9300 update isn't out yet.
Does that mean it's risky or might have different features from the official update?
Thanks again for your time!
Click to expand...
Click to collapse
Samsung builds are up to 4.1.2 currently. There is an unoffical leak of 4.2.1
If you go to an AOSP build of 4.2.2, you will lose all the samsung features. We're unsure when the Sammy 4.2.2 will come.
Gotcha!
So I guess it's better to wait to the official update then take the risk...
Thank you very much for your help!!
unknown2u2a said:
Gotcha!
So I guess it's better to wait to the official update then take the risk...
Thank you very much for your help!!
Click to expand...
Click to collapse
Depends on your outlook. I cant make that call for you
rootSU said:
Depends on your outlook. I cant make that call for you
Click to expand...
Click to collapse
Nahh... I can wait a few months without all the features they say come with 4.2.2...
Even if the custom ROM will be in any way better, it'll still exist...
Hey folks.
The S4 is my first smartphone. Ever. I rooted it a few weeks ago and have been playing with different tools and utilities. I love the extra control it gives me.
Been using Smartlauncher Pro as my launcher as well, but it doesn't give me the customization I want. I dig the UI though, it's minimalist just the way I like.
I've been keeping my eye out for ROM's I can try out, and I think I want to try Cynogen for the S4. However, I am terrified of destroying my investment. I've read horror stories of flashes gone wrong... I don't want to permanently brick my device.
Is there anyone here who can hold my hand while I install my ROM? I seriously have no idea what I'm doing, instructions or no.
...I sound so pathetic right now.
Thanks folks.
shaddz said:
Hey folks.
The S4 is my first smartphone. Ever. I rooted it a few weeks ago and have been playing with different tools and utilities. I love the extra control it gives me.
Been using Smartlauncher Pro as my launcher as well, but it doesn't give me the customization I want. I dig the UI though, it's minimalist just the way I like.
I've been keeping my eye out for ROM's I can try out, and I think I want to try Cynogen for the S4. However, I am terrified of destroying my investment. I've read horror stories of flashes gone wrong... I don't want to permanently brick my device.
Is there anyone here who can hold my hand while I install my ROM? I seriously have no idea what I'm doing, instructions or no.
...I sound so pathetic right now.
Thanks folks.
Click to expand...
Click to collapse
Do you have a custom recovery installed like TWRP or CWM? If you do all you need to do is download the rom (I put them on ext sd)....and gapps if your flashing cyanogen, boot into recovery, make a backup (I put this on my ext sd card too), wipe, flash rom, flash gapps and reboot.
shaddz said:
Hey folks.
The S4 is my first smartphone. Ever. I rooted it a few weeks ago and have been playing with different tools and utilities. I love the extra control it gives me.
Been using Smartlauncher Pro as my launcher as well, but it doesn't give me the customization I want. I dig the UI though, it's minimalist just the way I like.
I've been keeping my eye out for ROM's I can try out, and I think I want to try Cynogen for the S4. However, I am terrified of destroying my investment. I've read horror stories of flashes gone wrong... I don't want to permanently brick my device.
Is there anyone here who can hold my hand while I install my ROM? I seriously have no idea what I'm doing, instructions or no.
...I sound so pathetic right now.
Thanks folks.
Click to expand...
Click to collapse
Hi!
The first thing you need to find out is what build number you have. This will tell you if you are able to root and install recovery in order to put a new rom on the phone. Do NOT update your phone by the over the air update that is currently available! To find your build number go to settings: the more tab: about phone, then scroll down. If you have JDQ39.I545VRUAME7 then you are in the same boat as many of us and accidently did the upgrade which at this moment has no way to root. If you haven't done the upgrade than you need to find one of the many threads on here that will walk you through the process.
Hope this helps some, there are others on here that can give you a much more detailed walkthrough of how to root if you are on the correct older build.
The best advice I can give is to read the entire original post (OP) for the ROM you like, and as much of the thread as you can. 9 times out of 10 when someone has a problem with the ROM it's been discussed, and is often listed in the OP. Usually there are step by step instructions on installing the ROM. I believe there's a general ROM flashing guide in this forum somewhere as well.
Good luck and have fun :good:
Questions and help issues go in Q&A and Help section
Thread moved
FNM
shaddz said:
Hey folks.
The S4 is my first smartphone. Ever. I rooted it a few weeks ago and have been playing with different tools and utilities. I love the extra control it gives me.
Been using Smartlauncher Pro as my launcher as well, but it doesn't give me the customization I want. I dig the UI though, it's minimalist just the way I like.
I've been keeping my eye out for ROM's I can try out, and I think I want to try Cynogen for the S4. However, I am terrified of destroying my investment. I've read horror stories of flashes gone wrong... I don't want to permanently brick my device.
Is there anyone here who can hold my hand while I install my ROM? I seriously have no idea what I'm doing, instructions or no.
...I sound so pathetic right now.
Thanks folks.
Click to expand...
Click to collapse
You need to start reading, period.
srphoenix said:
Hi!
The first thing you need to find out is what build number you have. This will tell you if you are able to root and install recovery in order to put a new rom on the phone. Do NOT update your phone by the over the air update that is currently available! To find your build number go to settings: the more tab: about phone, then scroll down. If you have JDQ39.I545VRUAME7 then you are in the same boat as many of us and accidently did the upgrade which at this moment has no way to root. If you haven't done the upgrade than you need to find one of the many threads on here that will walk you through the process.
Hope this helps some, there are others on here that can give you a much more detailed walkthrough of how to root if you are on the correct older build.
Click to expand...
Click to collapse
JDQ39.I545VRUAMDK is the version I have. I froze the updater using Titanium a couple weeks ago... And my phone is already rooted.
shaddz said:
JDQ39.I545VRUAMDK is the version I have. I froze the updater using Titanium a couple weeks ago... And my phone is already rooted.
Click to expand...
Click to collapse
That's good! You haven't been updated which means you can still flash ROMs. Are you familiar with both types of ROMs, TouchWiz and AOSP? CyanogenMod is an AOSP ROM, which will be completely different from what you're running right now, TouchWiz. You're rooted, but have you installed a custom recovery? You need one to flash ROM's, either TWRP or CWM. You can also make a nandroid backup in recovery, and if anything goes wrong, you can go back to exactly how you are now. Definitely read the OP of the ROM thread multiple times and follow the flashing instructions correctly.
thesoldier said:
That's good! You haven't been updated which means you can still flash ROMs. Are you familiar with both types of ROMs, TouchWiz and AOSP? CyanogenMod is an AOSP ROM, which will be completely different from what you're running right now, TouchWiz. You're rooted, but have you installed a custom recovery? You need one to flash ROM's, either TWRP or CWM. You can also make a nandroid backup in recovery, and if anything goes wrong, you can go back to exactly how you are now. Definitely read the OP of the ROM thread multiple times and follow the flashing instructions correctly.
Click to expand...
Click to collapse
Okay, I just made a full phone backup using GooManager/TWRP.
Now for the next step...
shaddz said:
Okay, I just made a full phone backup using GooManager/TWRP.
Now for the next step...
Click to expand...
Click to collapse
If anything goes wrong with the flash in the next step, go to restore and you'll be back to how you are now.
Did you download the ROM to your phone along with Gapps? For AOSP Roms you need a separate gapps package, which is Google apps.
Sent from my SCH-I545 using Tapatalk 4 Beta
thesoldier said:
If anything goes wrong with the flash in the next step, go to restore and you'll be back to how you are now.
Did you download the ROM to your phone along with Gapps? For AOSP Roms you need a separate gapps package, which is Google apps.
Sent from my SCH-I545 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I just started the download for gapps package using Goomanager.
I checked out the Cyanogenmod site, apparently there's no stable versions for the VZW GS4?
Oh wells, flash anyway! That's what I do!
Worst case scenario, you have to use Odin to get back to stock. I used to keep a nandroid on my PC for just in case scenarios as well. One time on my GNex I flashed something really bad and had to adb pull everything off my phone, wipe the whole thing, and start over.
Sent from my SCH-I545 using Tapatalk 4 Beta
jova33 said:
Oh wells, flash anyway! That's what I do!
Worst case scenario, you have to use Odin to get back to stock. I used to keep a nandroid on my PC for just in case scenarios as well. One time on my GNex I flashed something really bad and had to adb pull everything off my phone, wipe the whole thing, and start over.
Sent from my SCH-I545 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Downloading the most recent nightly.
What do I do to get it on here?
shaddz said:
Downloading the most recent nightly.
What do I do to get it on here?
Click to expand...
Click to collapse
Yeah you'll have to download a nightly, I don't think there are any stable versions out yet. Are you downloading it directly on your phone? Or on your PC?
Sent from my SCH-I545 using Tapatalk 4 Beta
Thread cleaned of useless comments.
Thread is also closed - as XDA, even though full of helpful and nice people, is not a direct support site.
Users are expected to do some reading before they post and blatantly ask for hand holding. And, as you have seen, other users have a tendency to not be so nice and make trolling comments because of that.
This is a development site and is about development - so, please, study up first, then post questions based from what you have learned.
I'm a veteran of the HTC phones (and at least used to Samsung devices), but my friend wants his G3 to have a custom ROM on it. So I start looking around threads, and I didn't find any straightforward instructions on someone starting out.
Do I need to be S-Off or unlock a bootloader or anything like that? Or do I just grab the custom recovery and ROM, adb the recovery, and install the ROM? Everything I see just says to install the ROM from TWRP and go, but that's not very helpful unfortunately. He's on the latest LP ROM and firmware from Verizon, and I did at least see that this won't be a problem (unlike other devices where newer firmware can sometimes cause unlock issues. I'm probably going to install the Jasmine ROM on his phone to keep it relatively stock for him.
I'll take directions or even just a link if somebody has one handy. Thanks ahead of time for the help
Gamesoul Master said:
I'm a veteran of the HTC phones (and at least used to Samsung devices), but my friend wants his G3 to have a custom ROM on it. So I start looking around threads, and I didn't find any straightforward instructions on someone starting out.
Do I need to be S-Off or unlock a bootloader or anything like that? Or do I just grab the custom recovery and ROM, adb the recovery, and install the ROM? Everything I see just says to install the ROM from TWRP and go, but that's not very helpful unfortunately. He's on the latest LP ROM and firmware from Verizon, and I did at least see that this won't be a problem (unlike other devices where newer firmware can sometimes cause unlock issues. I'm probably going to install the Jasmine ROM on his phone to keep it relatively stock for him.
I'll take directions or even just a link if somebody has one handy. Thanks ahead of time for the help
Click to expand...
Click to collapse
Best/easiest option,
Downgrade to 12b using kdz
Root w/new root method
Flash twrp (adb, flashify, or dd)
Flash jasmine L Rom base
Flash jasmine L small upgrade builds if available
Profit!
Most links can be found in op 2 of my Reference sticky in the Verizon general forum.
bweN diorD said:
Best/easiest option,
Downgrade to 12b using kdz
Root w/new root method
Flash twrp (adb, flashify, or dd)
Flash jasmine L Rom base
Flash jasmine L small upgrade builds if available
Profit!
Most links can be found in op 2 of my Reference sticky in the Verizon general forum.
Click to expand...
Click to collapse
Thanks, somehow missed that thread. Glad to see its relatively straightforward with LG, considering it's not my phone and I haven't had an LG to work on (until I get the G4 ).
sorry to bug but can i install trwp from the trwp manger
phoenixaldana01 said:
sorry to bug but can i install trwp from the trwp manger
Click to expand...
Click to collapse
yes
So all all of them are bumb in that app just don't want to brick my device. And what is the bet one to use I ready put the bumb twrp on already just want to update it
phoenixaldana01 said:
So all all of them are bumb in that app just don't want to brick my device. And what is the bet one to use I ready put the bumb twrp on already just want to update it
Click to expand...
Click to collapse
personally i dont use any of those flashing apps. just go to original dev forum and grab the flashy zip of the latest version and flash in twrp. its that easy and done.
Hey guys, so the last phone I rooted and had a bootstrap on with custom roms was the Motorola Droid x2. We couldn't even get into the kernel. So with that being said I've acquired super user on my g3 months ago to freeze apps. But now I don't depend on my phone like I did then for work. So I want to do the whole thing and I'm unsure what choices to make. I'm not looking for a guide for installing stuff (at least not yet ) just trying to get suggestions and hopefully good recommendations.
So here's the main point for the post
TLDR!!!!!
Current android version 5.0.1
kernels- unlock it? Change it? Not sure what all you can actually do with that.
Bootstrap- clock work mod? Or any other one can't think of names but need something to load roms
Rom for battery and power- cyanogenmod is what I use to run on the x2 not sure if it's still one of the best?
Anything else I missed that I should get and check out?
Thanks in advance
Put TWRP custom recovery on your phone with the autorec TWRP app by @bender_007, in the General section of the non-variant specific G3 sections. Once you give the app superuser permissions it looks like it's hung up but give it 10-30 seconds because it's backing up your current recovery. Then click the button to install TWRP. Download the latest TWRP v2.8.7.0 from its thread also somewhere in the G3 sections, and flash it from your current TWRP.
I use @xdabbeb 's VS985 v2.0 ROM, which is based on the latest official LG ROM, build 35B, based on Android 5.1.1. Very happy with it, very smooth and great on battery.
I haven't heard the term bootstrap with regards to custom recoveries. I'd suggest just calling them custom recoveries.
Thanks for your input it's been a while after I read it I was like yep it's custom recoveries lol thank you again
Tweek900 said:
Thanks for your input it's been a while after I read it I was like yep it's custom recoveries lol thank you again
Click to expand...
Click to collapse
You're welcome! Glad to help!
So I tried to come to this site from my computer and it wouldn't load properly. I'm not sure if it's a me probably or the site please let me know thanks
Tweek900 said:
So I tried to come to this site from my computer and it wouldn't load properly. I'm not sure if it's a me probably or the site please let me know thanks
Click to expand...
Click to collapse
its you. i used a pc to access the site most of today and haven't had an issue.
Alright thanks I'll look into my pc then. Also I haven't decided if I want to flash a custom kernel I don't know what all it can change any advice?